Commit graph

982,081 commits

Author SHA1 Message Date
Frank Rowand
5babefb7f7 of: unittest: allow base devicetree to have symbol metadata
The overlay metadata nodes in the FDT created from testcases.dts
are not handled properly.

The __fixups__ and __local_fixups__ node were added to the live
devicetree, but should not be.

Only the first property in the /__symbols__ node was added to the
live devicetree if the live devicetree already contained a
/__symbols node.  All of the node's properties must be added.

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:12:24 -08:00
Frank Rowand
f962788101 of: overlay: set node fields from properties when add new overlay node
Overlay nodes added by add_changeset_node() do not have the node
fields name, phandle, and type set.

The node passed to __of_attach_node() when the add node changeset
entry is processed does not contain any properties.  The node's
properties are located in add property changeset entries that will
be processed after the add node changeset is applied.

Set the node's fields in the node contained in the add node
changeset entry and do not set them to incorrect values in
add_changeset_node().

A visible symptom that is fixed by this patch is the names of nodes
added by overlays that have an entry in /sys/bus/platform/drivers/*/
will contain the unit-address but the node-name will be <NULL>,  for
example, "fc4ab000.<NULL>".  After applying the patch the name, in
this example, for node restart@fc4ab000 is "fc4ab000.restart".

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:12:17 -08:00
Frank Rowand
8c329655c1 of: unittest: remove unused of_unittest_apply_overlay() argument
Argument unittest_nr is not used in of_unittest_apply_overlay(),
remove it.

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:12:10 -08:00
Frank Rowand
2fe0e8769d of: overlay: check prevents multiple fragments touching same property
Add test case of two fragments updating the same property.  After
adding the test case, the system hangs at end of boot, after
after slub stack dumps from kfree() in crypto modprobe code.

Multiple overlay fragments adding, modifying, or deleting the same
property is not supported.  Add check to detect the attempt and fail
the overlay apply.

Before this patch, the first fragment error would terminate
processing.  Allow fragment checking to proceed and report all
of the fragment errors before terminating the overlay apply. This
is not a hot path, thus not a performance issue (the error is not
transient and requires fixing the overlay before attempting to
apply it again).

After applying this patch, the devicetree unittest messages will
include:

   OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail

   ...

   ### dt-test ### end of unittest - 212 passed, 0 failed

The check to detect two fragments updating the same property is
folded into the patch that created the test case to maintain
bisectability.

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:12:03 -08:00
Frank Rowand
c168263b5a of: overlay: check prevents multiple fragments add or delete same node
Multiple overlay fragments adding or deleting the same node is not
supported.  Replace code comment of such, with check to detect the
attempt and fail the overlay apply.

Devicetree unittest where multiple fragments added the same node was
added in the previous patch in the series.  After applying this patch
the unittest messages will no longer include:

   Duplicate name in motor-1, renamed to "controller#1"
   OF: overlay: of_overlay_apply() err=0
   ### dt-test ### of_overlay_fdt_apply() expected -22, ret=0, overlay_bad_add_dup_node
   ### dt-test ### FAIL of_unittest_overlay_high_level():2419 Adding overlay 'overlay_bad_add_dup_node' failed

   ...

   ### dt-test ### end of unittest - 210 passed, 1 failed

but will instead include:

   OF: overlay: ERROR: multiple overlay fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller

   ...

   ### dt-test ### end of unittest - 211 passed, 0 failed

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:11:57 -08:00
Frank Rowand
a68238a19c of: overlay: test case of two fragments adding same node
Multiple overlay fragments adding or deleting the same node is not
supported.  An attempt to do so results in an incorrect devicetree.
The node name will be munged for the second add.

After adding this patch, the unittest messages will show:

   Duplicate name in motor-1, renamed to "controller#1"
   OF: overlay: of_overlay_apply() err=0
   ### dt-test ### of_overlay_fdt_apply() expected -22, ret=0, overlay_bad_add_dup_node
   ### dt-test ### FAIL of_unittest_overlay_high_level():2419 Adding overlay 'overlay_bad_add_dup_node' failed

   ...

   ### dt-test ### end of unittest - 210 passed, 1 failed

The incorrect (munged) node name "controller#1" can be seen in the
/proc filesystem:

   $ pwd
   /proc/device-tree/testcase-data-2/substation@100/motor-1
   $ ls
   compatible    controller    controller#1  name          phandle       spin
   $ ls controller
   power_bus
   $ ls controller#1
   power_bus_emergency

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:11:51 -08:00
Frank Rowand
a15e824ff2 of: overlay: make all pr_debug() and pr_err() messages unique
Make overlay.c debug and error messages unique so that they can be
unambiguously found by grep.

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:11:39 -08:00
Frank Rowand
6f75118800 of: overlay: validate overlay properties #address-cells and #size-cells
If overlay properties #address-cells or #size-cells are already in
the live devicetree for any given node, then the values in the
overlay must match the values in the live tree.

If the properties are already in the live tree then there is no
need to create a changeset entry to add them since they must
have the same value.  This reduces the memory used by the
changeset and eliminates a possible memory leak.

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:11:32 -08:00
Frank Rowand
81225ea682 of: overlay: reorder fields in struct fragment
Order the fields of struct fragment in the same order as
struct of_overlay_notify_data.  The order in struct fragment is
not significant.  If both structs are ordered the same then when
examining the data in a debugger or dump the human involved does
not have to remember which context they are examining.

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:11:23 -08:00
Frank Rowand
8814dc46bd of: overlay: do not duplicate properties from overlay for new nodes
When allocating a new node, add_changeset_node() was duplicating the
properties from the respective node in the overlay instead of
allocating a node with no properties.

When this patch is applied the errors reported by the devictree
unittest from patch "of: overlay: add tests to validate kfrees from
overlay removal" will no longer occur.  These error messages are of
the form:

   "OF: ERROR: ..."

and the unittest results will change from:

   ### dt-test ### end of unittest - 203 passed, 7 failed

to

   ### dt-test ### end of unittest - 210 passed, 0 failed

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:11:15 -08:00
Frank Rowand
6b4955ba7b of: overlay: use prop add changeset entry for property in new nodes
The changeset entry 'update property' was used for new properties in
an overlay instead of 'add property'.

The decision of whether to use 'update property' was based on whether
the property already exists in the subtree where the node is being
spliced into.  At the top level of creating a changeset describing the
overlay, the target node is in the live devicetree, so checking whether
the property exists in the target node returns the correct result.
As soon as the changeset creation algorithm recurses into a new node,
the target is no longer in the live devicetree, but is instead in the
detached overlay tree, thus all properties are incorrectly found to
already exist in the target.

This fix will expose another devicetree bug that will be fixed
in the following patch in the series.

When this patch is applied the errors reported by the devictree
unittest will change, and the unittest results will change from:

   ### dt-test ### end of unittest - 210 passed, 0 failed

to

   ### dt-test ### end of unittest - 203 passed, 7 failed

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:11:08 -08:00
Frank Rowand
5b3f5c408d powerpc/pseries: add of_node_put() in dlpar_detach_node()
The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs().  This results in a refcount imbalance
for nodes attached with dlpar_attach_node().  The calling sequence
from dlpar_attach_node() to __of_attach_node_sysfs() is:

   dlpar_attach_node()
      of_attach_node()
         __of_attach_node_sysfs()

For more detailed description of the node refcount, see
commit 68baf692c4 ("powerpc/pseries: Fix of_node_put() underflow
during DLPAR remove").

Tested-by: Alan Tull <atull@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:11:00 -08:00
Frank Rowand
5b2c2f5a0e of: overlay: add missing of_node_get() in __of_attach_node_sysfs
There is a matching of_node_put() in __of_detach_node_sysfs()

Remove misleading comment from function header comment for
of_detach_node().

This patch may result in memory leaks from code that directly calls
the dynamic node add and delete functions directly instead of
using changesets.

This commit should result in powerpc systems that dynamically
allocate a node, then later deallocate the node to have a
memory leak when the node is deallocated.

The next commit will fix the leak.

Tested-by: Alan Tull <atull@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:10:53 -08:00
Frank Rowand
7c528e457d of: overlay: add missing of_node_put() after add new node to changeset
The refcount of a newly added overlay node decrements to one
(instead of zero) when the overlay changeset is destroyed.  This
change will cause the final decrement be to zero.

After applying this patch, new validation warnings will be
reported from the devicetree unittest during boot due to
a pre-existing devicetree bug.  The warnings will be similar to:

  OF: ERROR: memory leak before free overlay changeset,  /testcase-data/overlay-node/test-bus/test-unittest4

This pre-existing devicetree bug will also trigger a WARN_ONCE() from
refcount_sub_and_test_checked() when an overlay changeset is
destroyed without having first been applied.  This scenario occurs
when an error in the overlay is detected during the overlay changeset
creation:

  WARNING: CPU: 0 PID: 1 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa8/0xbc
  refcount_t: underflow; use-after-free.

  (unwind_backtrace) from (show_stack+0x10/0x14)
  (show_stack) from (dump_stack+0x6c/0x8c)
  (dump_stack) from (__warn+0xdc/0x104)
  (__warn) from (warn_slowpath_fmt+0x44/0x6c)
  (warn_slowpath_fmt) from (refcount_sub_and_test_checked+0xa8/0xbc)
  (refcount_sub_and_test_checked) from (kobject_put+0x24/0x208)
  (kobject_put) from (of_changeset_destroy+0x2c/0xb4)
  (of_changeset_destroy) from (free_overlay_changeset+0x1c/0x9c)
  (free_overlay_changeset) from (of_overlay_remove+0x284/0x2cc)
  (of_overlay_remove) from (of_unittest_apply_revert_overlay_check.constprop.4+0xf8/0x1e8)
  (of_unittest_apply_revert_overlay_check.constprop.4) from (of_unittest_overlay+0x960/0xed8)
  (of_unittest_overlay) from (of_unittest+0x1cc4/0x2138)
  (of_unittest) from (do_one_initcall+0x4c/0x28c)
  (do_one_initcall) from (kernel_init_freeable+0x29c/0x378)
  (kernel_init_freeable) from (kernel_init+0x8/0x110)
  (kernel_init) from (ret_from_fork+0x14/0x2c)

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:10:44 -08:00
Frank Rowand
144552c786 of: overlay: add tests to validate kfrees from overlay removal
Add checks:
  - attempted kfree due to refcount reaching zero before overlay
    is removed
  - properties linked to an overlay node when the node is removed
  - node refcount > one during node removal in a changeset destroy,
    if the node was created by the changeset

After applying this patch, several validation warnings will be
reported from the devicetree unittest during boot due to
pre-existing devicetree bugs. The warnings will be similar to:

  OF: ERROR: of_node_release(), unexpected properties in /testcase-data/overlay-node/test-bus/test-unittest11
  OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /testcase-data-2/substation@100/
  hvac-medium-2

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-11-08 22:10:35 -08:00
Paul E. McKenney
0607ba8403 srcu: Prevent __call_srcu() counter wrap with read-side critical section
Ever since cdf7abc461 ("srcu: Allow use of Tiny/Tree SRCU from
both process and interrupt context"), it has been permissible
to use SRCU read-side critical sections in interrupt context.
This allows __call_srcu() to use SRCU read-side critical sections to
prevent a new SRCU grace period from ending before the call to either
srcu_funnel_gp_start() or srcu_funnel_exp_start completes, thus preventing
SRCU grace-period counter overflow during that time.

Note that this does not permit removal of the counter-wrap checks in
srcu_gp_end().  These check are necessary to handle the case where
a given CPU does not interact at all with SRCU for an extended time
period.

This commit therefore adds an SRCU read-side critical section to
__call_srcu() in order to prevent grace period counter wrap during
the funnel-locking process.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:54:14 -08:00
Randy Dunlap
f3e763c3e5 srcu: Fix kernel-doc missing notation
Fix kernel-doc warnings for missing parameter descriptions:

../include/linux/srcu.h:175: warning: Function parameter or member 'p' not described in 'srcu_dereference_notrace'
../include/linux/srcu.h:175: warning: Function parameter or member 'sp' not described in 'srcu_dereference_notrace'

Fixes: 0b764a6e4e ("srcu: Add notrace variant of srcu_dereference")

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:54:14 -08:00
Lance Roy
868f7a09a4 x86/PCI: Replace spin_is_locked() with lockdep
lockdep_assert_held() is better suited to checking locking requirements,
since it only checks if the current thread holds the lock regardless of
whether someone else does. This is also a step towards possibly removing
spin_is_locked().

Signed-off-by: Lance Roy <ldr709@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
Cc: <linux-pci@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-11-08 21:53:35 -08:00
Willy Tarreau
b94ec36896 rcutorture: Make use of nolibc when available
This reduces the size of the init executable from ~800 kB to ~800 bytes
on x86_64. This is only implemented for x86_64, i386, arm and arm64.
Others not tested.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:52:55 -08:00
Willy Tarreau
66b6f755ad rcutorture: Import a copy of nolibc
This is a definition of the most common syscalls needed in minimalist
init executables, allowing to statically build them with no external
dependencies. It is sufficient in its current form to build rcutorture's
init on x86_64, i386, arm, and arm64. Others have not been ported or
tested. Updates may be found here :

     http://git.formilux.org/?p=people/willy/nolibc.git

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:52:55 -08:00
Willy Tarreau
825fa4cdfb rcutorture: Check initrd/init instead of initrd only
If the build fails, we can end up with an empty initrd directory which
prevents the build script from operating again. Better rely on the
resulting init executable instead.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:52:55 -08:00
Willy Tarreau
18d7bf8ed3 rcutorture: Always strip using the cross-compiler
Strip using -s on the compiler command line instead of calling the "strip"
utility as the latter isn't necessarily compatible with the target arch.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:52:55 -08:00
Paul E. McKenney
70e9f50477 rcutorture: Add cross-compile capability to initrd.sh
This adds the CROSS_COMPILE environment to the initrd.sh script's
gcc command to enable cross compilation.

Reported-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:52:55 -08:00
Paul E. McKenney
229ab0cb5b rcutorture: Make initrd/init execute in userspace
Currently, the initrd/init script and executable remain blocked almost
all the time.  However, it is necessary to test nohz_full userspace
execution, which both variants of initrd/init fail to do.  This commit
therefore causes initrd/init to spend about a millisecond per second
executing in userspace.

Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:52:55 -08:00
Paul E. McKenney
38e630424b rcutorture: Add initrd support for systems lacking dracut
The support for creating initrd directories using dracut is a great
improvement over having to always hand-create them, it is a bit annoying
to have to install some otherwise irrelevant package just to be able to
run rcutorture.  This commit therefore adds support for creating initrd
directories on systems innocent of dracut.  You do need gcc, but then
again you need that to build the kernel (or to build llvm) in any case.

The idea is to create an initrd directory containing nothing but a
statically linked binary having a for-loop over a long-term sleep().
The result is a Linux kernel with almost no userspace: even the
time-honored /dev, /lib, /tmp, and /usr directories are gone.  In fact,
the only directory present is "/", but only because I don't know how to
get rid of it, at least short of not having an initrd in the first place.
Although statically linked binaries are much maligned, and rightly so,
their disadvantages seem to be irrelevant for this particular use case.
From https://www.akkadia.org/drepper/no_static_linking.html:

1.	Fixes are difficult to apply to hordes of widely scattered
	statically linked binaries.  But in this case, there is only one
	binary, but there would otherwise be no fewer than four libraries.

2.	Security measures like local address randomization cannot be used.
	Prudence prevents me from asserting that it is impossible to
	base a remote attack on a networking-free rcutorture instance.
	Nevertheless, bonus points to the first person who comes up with
	such an attack!

3.	More efficient use of physical memory.  Not in this case, given
	that libc is 1.8MB and the statically linked binary "only" 800K.

4.	Features such as locales, name service switch (NSS),
	internationalized domain names (IDN) tool, and so on require
	dynamic linking.  Bonus points to the first person coming up
	with a valid rcutorture use case requiring these features in
	its initrd.

5.	Accidental violations of (L)GPL.  Actually, this change actually
	helps -avoid- such violations by reducing the temptation to
	pass around tarballs of rcutorture-ready initrd directories.
	After all, the rcutorture scripts automatically create an initrd
	directory for you, so why bother with the tarballs?

6.	Tools and hacks like ltrace, LD_PRELOAD, LD_PROFILE, and LD_AUDIT
	don't work.  Again, bonus points to the first person coming up
	with a valid rcutorture use case requiring these features in
	its initrd.

Nevertheless, the script will use dracut if available, and will create the
statically linked binary only when dracut are missing.  Those preferring
the smaller initrd directory resulting from the statically linked binary
(like me) are free to hand-edit mkinitrd.sh to remove the code using
dracut.  ;-)

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:52:55 -08:00
Connor Shu
8f15c682ac rcutorture: Automatically create initrd directory
The rcutorture scripts currently expect the user to create the
tools/testing/selftests/rcutorture/initrd directory.  Should the user
fail to do this, the kernel build will fail with obscure and confusing
error messages.  This commit therefore adds explicit checks for the
tools/testing/selftests/rcutorture/initrd directory, and if not present,
creates one on systems on which dracut is installed.  If this directory
could not be created, a less obscure error message is emitted and the
test is aborted.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Connor Shu <Connor.Shu@ibm.com>
[ paulmck: Adapt the script to fit into the rcutorture framework and
  severely abbreviate the initrd/init script. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:52:55 -08:00
Joel Fernandes (Google)
dd944caa81 doc: Remove rcu_preempt_state reference in stallwarn
Consolidation of RCU-bh, RCU-preempt, and RCU-sched into one RCU flavor
to rule them all resulted in the removal of rcu_preempt_state.  However,
stallwarn.txt still mentions rcu_preempt_state.  This commit therefore
Updates stallwarn documentation accordingly.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-11-08 21:44:41 -08:00
Joel Fernandes (Google)
2d0350a8f0 doc: Clarify RCU data-structure comment about rcu_tree fanout
RCU Data-Structures document describes a trick to test RCU with small
number of CPUs but with a taller tree. It wasn't immediately clear how
the document arrived at 16 CPUs which also requires setting the
FANOUT_LEAF to 2 instead of the default of 16.  This commit therefore
provides the needed clarification.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-11-08 21:44:41 -08:00
Paul E. McKenney
832aa35a65 doc: Set down forward-progress requirements
This commit adds a section to the requirements documentation setting down
requirements for grace-period and callback-invocation forward progress.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:44:41 -08:00
Paul E. McKenney
04229110ad powerpc: Convert hugepd_free() to use call_rcu()
Now that call_rcu()'s callback is not invoked until after all
preempt-disable regions of code have completed (in addition to explicitly
marked RCU read-side critical sections), call_rcu() can be used in place
of call_rcu_sched().  This commit therefore makes that change.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: <linuxppc-dev@lists.ozlabs.org>
2018-11-08 21:43:20 -08:00
Paul E. McKenney
0d4e68e2f3 s390/mm: Convert tlb_table_flush() to use call_rcu()
Now that call_rcu()'s callback is not invoked until after all
preempt-disable regions of code have completed (in addition to explicitly
marked RCU read-side critical sections), call_rcu() can be used in place
of call_rcu_sched().  This commit therefore makes that change.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <linux-s390@vger.kernel.org>
2018-11-08 21:43:20 -08:00
Paul E. McKenney
8fa9eb388e sparc/oprofile: Convert timer_stop() to use synchronize_rcu()
Now that synchronize_rcu() waits for preempt-disable regions of code
in addition to explicitly marked RCU read-side critical sections,
synchronize_rcu() can be used in place of synchronize_sched().  This
commit therefore makes that change.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Robert Richter <rric@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <oprofile-list@lists.sf.net>
Cc: <sparclinux@vger.kernel.org>
2018-11-08 21:43:20 -08:00
Paul E. McKenney
78d125d338 sched/membarrier: Replace synchronize_sched() with synchronize_rcu()
Now that synchronize_rcu() waits for preempt-disable regions of code
as well as RCU read-side critical sections, the synchronize_sched()
in sys_membarrier() can be replaced by synchronize_rcu().  This commit
therefore makes this change.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
2018-11-08 21:43:20 -08:00
Paul E. McKenney
d3ff3891b2 rcu: Consolidate the RCU update functions invoked by sync.c
This commit retains all the various gp_ops[] entries, but makes their
update functions all be synchronize_rcu(), call_rcu() and rcu_barrier().
The read-side checks remain consistent with the various RCU flavors,
which still exist on the read side.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
2018-11-08 21:43:20 -08:00
Paul E. McKenney
309ba859b9 rcu: Eliminate synchronize_rcu_mult()
Now that synchronize_rcu() waits for both RCU read-side critical
sections and preempt-disabled regions of code, the sole caller of
synchronize_rcu_mult() can be replaced by synchronize_rcu().
This patch makes this change and removes synchronize_rcu_mult().
Note that _wait_rcu_gp() still supports synchronize_rcu_mult(),
and thus might be simplified in the future to take only take
a single call_rcu() function rather than the current list of them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-11-08 21:43:20 -08:00
Joel Fernandes (Google)
adbccddb4a rcu: Fix rcu_{node,data} comments about gp_seq_needed
Recent changes have removed the old ->gp_seq_needed field from the
rcu_state structure, which in turn obsoleted a couple of comments in
the rcu_node and rcu_data structures.  This commit therefore updates
these comments accordingly.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-11-08 21:43:20 -08:00
Joel Fernandes (Google)
75a8f72245 rcu: Remove unused rcu_state externs
The rcu_bh_state and rcu_sched_state variables were removed during the
RCU flavor consolidations, but external declarations remain in tree.h.
This commit therefore removes these obsolete declarations.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-11-08 21:43:20 -08:00
Paul E. McKenney
08543bda42 rcu: Eliminate BUG_ON() for kernel/rcu/tree.c
The tree.c file has a number of calls to BUG_ON(), which panics the
kernel, which is not a good strategy for devices (like embedded) that
don't have a way to capture console output.  This commit therefore
converts these BUG_ON() calls to WARN_ON_ONCE() and WARN_ONCE().

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-11-08 21:41:57 -08:00
Paul E. McKenney
042d4c70a2 rcu: Eliminate BUG_ON() for sync.c
The sync.c file has a number of calls to BUG_ON(), which panics the
kernel, which is not a good strategy for devices (like embedded) that
don't have a way to capture console output.  This commit therefore
changes these BUG_ON() calls to WARN_ON_ONCE(), but does so quite naively.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
2018-11-08 21:41:57 -08:00
David S. Miller
db8ba1e8c3 Merge branch 'nfp-abm-move-code-and-improve-parameter-validation'
Jakub Kicinski says:

====================
nfp: abm: move code and improve parameter validation

This set starts by separating Qdisc handling code into a new file.
Next two patches allow early access to TLV-based capabilities during
probe, previously the capabilities were parsed just before netdevs
were registered, but its cleaner to do some basic validation earlier
and avoid cleanup work.

Next three patches improve RED's parameter validation.  First we provide
a more precise message about why offload failed (and move the parameter
validation to a helper).  Next we make sure we don't set the top bit
in the 32 bit max RED threshold value.  Because FW is treating the value
as signed it reportedly causes slow downs (unnecessary queuing and
marking) when top bit is set with recent firmwares.  Last (and perhaps
least importantly) we offload the harddrop parameter of the Qdisc.
We don't plan to offload harddrop RED, but it seems prudent to make
sure user didn't set that flag as device behaviour would have differed.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:48:01 -08:00
Jakub Kicinski
6e5a716f42 nfp: abm: refuse RED offload with harddrop set
RED Qdisc will now inform the drivers about the state of the harddrop
flag.  Refuse to offload in case harddrop is set.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:48:01 -08:00
Jakub Kicinski
190852a55e net: sched: red: inform offloads about harddrop setting
To mirror software behaviour on offload more precisely inform
the drivers about the state of the harddrop flag.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:48:01 -08:00
Jakub Kicinski
cae5f48e32 nfp: abm: don't set negative threshold
Turns out the threshold value is used in signed compares in the FW,
so we should avoid setting the top bit.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:48:01 -08:00
Jakub Kicinski
032748acf6 nfp: abm: provide more precise info about offload parameter validation
Improve log messages printed when RED can't be offloaded because
of Qdisc parameters.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:48:01 -08:00
Jakub Kicinski
83ec8857a0 nfp: parse vNIC TLV capabilities at alloc time
In certain cases initialization logic which follows allocation of
the vNIC structure may want to validate the capabilities of that vNIC.
This is easy before vNIC is initialized for normal capabilities which
are at fixed offsets in control memory, easy to locate and read, but
poses a challenge if the capabilities are in form of TLVs.  Parse
the TLVs early on so other code can just access parsed info, instead
of having to do the parsing by itself.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:48:00 -08:00
Jakub Kicinski
e38f5d11b9 nfp: pass ctrl_bar pointer to nfp_net_alloc
Move setting ctrl_bar pointer to the nfp_net_alloc function,
to make sure we can parse capabilities early in the following
patch.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:48:00 -08:00
Jakub Kicinski
47330f9bdf nfp: abm: split qdisc offload code into a separate file
The Qdisc offload code is logically separate, and we will soon
do significant surgery on it to support more Qdiscs, so move
it to a separate file.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:48:00 -08:00
Neal Cardwell
1106a5ade1 tcp_bbr: update comments to reflect pacing_margin_percent
Recently, in commit ab408b6dc7 ("tcp: switch tcp and sch_fq to new
earliest departure time model"), the TCP BBR code switched to a new
approach of using an explicit bbr_pacing_margin_percent for shaving a
pacing rate "haircut", rather than the previous implict
approach. Update an old comment to reflect the new approach.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:46:17 -08:00
David S. Miller
dd00e06d3b Merge branch 'net-Use-__vlan_hwaccel_-helpers'
Michał Mirosław says:

====================
net: Use __vlan_hwaccel_*() helpers

This series removes from networking core and driver code an assumption
about how VLAN tag presence is stored in an skb. This will allow to free
up overloading of VLAN.CFI bit to incidate tag's presence.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:45:05 -08:00
Michał Mirosław
3149a2711b sky2: use __vlan_hwaccel helpers
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 20:45:04 -08:00