Use a router between endpoints, implemented via namespaces, set a low MTU
between router and destination endpoint, exceed it and check PMTU value in
route exceptions.
v2:
- Introduce IPv4 tests right away, if iproute2 doesn't support the 'df'
link option they will be skipped (David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
draft-ietf-nvo3-geneve-08 says:
It is strongly RECOMMENDED that Path MTU Discovery ([RFC1191],
[RFC1981]) be used by setting the DF bit in the IP header when Geneve
packets are transmitted over IPv4 (this is the default with IPv6).
Now that ICMP error handling is working for GENEVE, we can comply with
this recommendation.
Make this configurable, though, to avoid breaking existing setups. By
default, DF won't be set. It can be set or inherited from inner IPv4
packets. If it's configured to be inherited and we are encapsulating IPv6,
it will be set.
This only applies to non-lwt tunnels: if an external control plane is
used, tunnel key will still control the DF flag.
v2:
- DF behaviour configuration only applies for non-lwt tunnels, apply DF
setting only if (!geneve->collect_md) in geneve_xmit_skb()
(Stephen Hemminger)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Export an encap_err_lookup() operation to match an ICMP error against a
valid VNI.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a router between endpoints, implemented via namespaces, set a low MTU
between router and destination endpoint, exceed it and check PMTU value in
route exceptions.
v2:
- Change all occurrences of VxLAN to VXLAN (Jiri Benc)
- Introduce IPv4 tests right away, if iproute2 doesn't support the 'df'
link option they will be skipped (David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow users to set the IPv4 DF bit in outgoing packets, or to inherit its
value from the IPv4 inner header. If the encapsulated protocol is IPv6 and
DF is configured to be inherited, always set it.
For IPv4, inheriting DF from the inner header was probably intended from
the very beginning judging by the comment to vxlan_xmit(), but it wasn't
actually implemented -- also because it would have done more harm than
good, without handling for ICMP Fragmentation Needed messages.
According to RFC 7348, "Path MTU discovery MAY be used". An expired RFC
draft, draft-saum-nvo3-pmtud-over-vxlan-05, whose purpose was to describe
PMTUD implementation, says that "is a MUST that Vxlan gateways [...]
SHOULD set the DF-bit [...]", whatever that means.
Given this background, the only sane option is probably to let the user
decide, and keep the current behaviour as default.
This only applies to non-lwt tunnels: if an external control plane is
used, tunnel key will still control the DF flag.
v2:
- DF behaviour configuration only applies for non-lwt tunnels, move DF
setting to if (!info) block in vxlan_xmit_one() (Stephen Hemminger)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Export an encap_err_lookup() operation to match an ICMP error against a
valid VNI.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
For both IPv4 and IPv6, if we can't match errors to a socket, try
tunnels before ignoring them. Look up a socket with the original source
and destination ports as found in the UDP packet inside the ICMP payload,
this will work for tunnels that force the same destination port for both
endpoints, i.e. VXLAN and GENEVE.
Actually, lwtunnels could break this assumption if they are configured by
an external control plane to have different destination ports on the
endpoints: in this case, we won't be able to trace ICMP messages back to
them.
For IPv6 redirect messages, call ip6_redirect() directly with the output
interface argument set to the interface we received the packet from (as
it's the very interface we should build the exception on), otherwise the
new nexthop will be rejected. There's no such need for IPv4.
Tunnels can now export an encap_err_lookup() operation that indicates a
match. Pass the packet to the lookup function, and if the tunnel driver
reports a matching association, continue with regular ICMP error handling.
v2:
- Added newline between network and transport header sets in
__udp{4,6}_lib_err_encap() (David Miller)
- Removed redundant skb_reset_network_header(skb); in
__udp4_lib_err_encap()
- Removed redundant reassignment of iph in __udp4_lib_err_encap()
(Sabrina Dubroca)
- Edited comment to __udp{4,6}_lib_err_encap() to reflect the fact this
won't work with lwtunnels configured to use asymmetric ports. By the way,
it's VXLAN, not VxLAN (Jiri Benc)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
All other overlay functions(almost all other functions in i915)
follow intel_overlay_verb, so renaming overlay ones that do not match
that.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108001647.11276-4-jose.souza@intel.com
IPC is a display feature, so i915_load_modeset_init() is the right
place to initialize it.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108001647.11276-3-jose.souza@intel.com
Although FBC helps save power it do not belongs to power management
also the cleanup was placed in i915_driver_unload() also not a good
place. intel_modeset_init()/intel_modeset_cleanup() are better places
also this will help make easy disable features that depends in
display being enabled in driver.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108001647.11276-2-jose.souza@intel.com
i915_load_modeset_init() is a more suitable place than
i915_driver_load() as vblank is part of modeset.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108001647.11276-1-jose.souza@intel.com
Trivial fix to spelling mistake in dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
avoid to compute the hash value if dev is not null, since
hash value is not used
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hns3_reset_notify_init_enet() only return error early if the return
value of hns3_restore_vlan() is not 0.
This patch adds checking for the return value of hns3_restore_vlan.
Fixes: 7fa6be4fd2 ("net: hns3: fix incorrect return value/type of some functions")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reduces the size of struct skl_wm_level from 6 to 4, which
reduces the size of struct skl_plane_wm from 104 to 70, which reduces
the size of struct skl_pipe_wm from 524 to 356. A reduction of 168
padding bytes per pipe. This will increase even more the next time we
bump I915_MAX_PLANES.
v2: Paste the pahole output provided by Lucas:
$ pahole -s -C skl_wm_level drivers/gpu/drm/i915/i915.o
struct skl_wm_level {
bool plane_en; /* 0 1 */
/* XXX 1 byte hole, try to pack */
uint16_t plane_res_b; /* 2 2 */
uint8_t plane_res_l; /* 4 1 */
/* size: 6, cachelines: 1, members: 3 */
/* sum members: 4, holes: 1, sum holes: 1 */
/* padding: 1 */
/* last cacheline: 6 bytes */
};
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016220133.26991-3-paulo.r.zanoni@intel.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/broadcom/genet/bcmgenet.c: In function 'bcmgenet_power_down':
drivers/net/ethernet/broadcom/genet/bcmgenet.c:1136:6: warning:
variable 'ret' set but not used [-Wunused-but-set-variable]
bcmgenet_power_down should return 'ret' instead of 0.
Fixes: ca8cf34190 ("net: bcmgenet: propagate errors from bcmgenet_power_down")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
net: sched: prepare for more Qdisc offloads
This series refactors the "switchdev" Qdisc offloads a little. We have
a few Qdiscs which can be fully offloaded today to the forwarding plane
of switching devices.
First patch adds a helper for handing statistic dumps, the code seems
to be copy pasted between PRIO and RED. Second patch removes unnecessary
parameter from RED offload function. Third patch makes the MQ offload
use the dump helper which helps it behave much like PRIO and RED when
it comes to the TCQ_F_OFFLOADED flag. Patch 4 adds a graft helper,
similar to the dump helper.
Patch 5 is unrelated to offloads, qdisc_graft() code seemed ripe for a
small refactor - no functional changes there.
Last two patches move the qdisc_put() call outside of the sch_tree_lock
section for RED and PRIO. The child Qdiscs will get removed from the
hierarchy under the lock, but having the put (and potentially destroy)
called outside of the lock helps offload which may choose to sleep,
and it should generally lower the Qdisc change impact.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Move destroying of the old child qdiscs outside of the sch_tree_lock()
section. This should improve the software qdisc replace but is even
more important for offloads. Calling offloads under a spin lock is
best avoided, and child's destroy would be called under sch_tree_lock().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move destroying of the old child qdisc outside of the sch_tree_lock()
section. This should improve the software qdisc replace but is even
more important for offloads. Firstly calling offloads under a spin
lock is best avoided. Secondly the destroy event of existing child
would have been sent to the offload device before the replace, causing
confusion.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code for grafting Qdiscs when there is a parent has two needless
indentation levels, and breaks the "keep the success path unindented"
guideline. Refactor.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Qdisc graft operation of offload-capable qdiscs performs a few
extra steps which are identical among all the qdiscs. Add
a helper to share this code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PRIO and RED mark the qdisc with TCQ_F_OFFLOADED upon successful offload,
make MQ do the same. The consistency will help with consistent
graft callback behaviour.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offload dump helper does not use opt parameter, remove it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Qdisc dump operation of offload-capable qdiscs performs a few
extra steps which are identical among all the qdiscs. Add
a helper to share this code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the expression "word1 << 16", word1 starts as u16, but is promoted to a
signed int, then sign-extended to resource_size_t, which is probably not
what was intended. Cast to resource_size_t to avoid the sign extension.
This fixes an identical issue as fixed by commit 0b2d70764b ("x86/PCI:
Fix Broadcom CNB20LE unintended sign extension") back in 2014.
Detected by CoverityScan, CID#138749, 138750 ("Unintended sign extension")
Fixes: 3f6ea84a30 ("PCI: read memory ranges out of Broadcom CNB20LE host bridge")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJEEABYIADkWIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCW+SJrBscamFjZWsuYW5h
c3pld3NraUBnbWFpbC5jb20ACgkQYhBsURv0pdtTfAEAg9TNQi+IAth1TuEfbsrO
ykB2PDEPD0wZnWh/sEIYhdAA/3zhYeqPq4X9PLhtRZQ2fJFE2Uw/4BTmSAqffD+L
2ZwG
=MA3z
-----END PGP SIGNATURE-----
Merge tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
"All three fixes are related to the newly added pattern trigger:
- remove mutex_lock() from timer callback, which would trigger
problems related to sleeping in atomic context, the removal is
harmless since mutex protection turned out to be redundant in this
case
- fix pattern parsing to properly handle intervals with brightness == 0
- fix typos in the ABI documentation"
* tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
Documentation: ABI: led-trigger-pattern: Fix typos
leds: trigger: Fix sleeping function called from invalid context
Fix pattern handling optimalization
Two small regression fixes for HD-audio: one about vga_switcheroo and
runtime PM, and another about Oops on some Thinkpads.
-----BEGIN PGP SIGNATURE-----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=TOgu
-----END PGP SIGNATURE-----
Merge tag 'sound-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Two small regression fixes for HD-audio: one about vga_switcheroo and
runtime PM, and another about Oops on some Thinkpads"
* tag 'sound-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix incorrect clearance of thinkpad_acpi hooks
vga_switcheroo: Fix missing gpu_bound call at audio client registration
Heiner Kallweit says:
====================
net: phy: improve and simplify phylib state machine
This patch series is based on two axioms:
- During autoneg a PHY always reports the link being down
- Info in clause 22/45 registers doesn't allow to differentiate between
these two states:
1. Link is physically down
2. A link partner is connected and PHY is autonegotiating
In both cases "link up" and "aneg finished" bits aren't set.
One consequence is that having separate states PHY_NOLINK and PHY_AN
isn't needed.
By using these two axioms the state machine can be significantly
simplified.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use phy_check_link_status in more places in the state machine.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the recent changes in the state machine state PHY_AN isn't used
any longer and can be removed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In few places in the state machine the state is set to PHY_RUNNING or
PHY_NOLINK after doing a phy_read_status(). So factor this out to
phy_check_link_status().
First use it in phy_start_aneg(): By setting the state to PHY_RUNNING
or PHY_NOLINK directly we can remove the code to handle the case that
we're using interrupts and aneg was finished already.
Definition of phy_link_up and phy_link_down needs to be moved because
they are called in the new function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If aneg isn't finished yet then the PHY reports the link as down.
There's no benefit in setting the state to PHY_AN because the next
state machine run would set the status to PHY_NOLINK anyway (except
in the meantime aneg has been finished and link is up). Therefore
we can set the state to PHY_RUNNING or PHY_NOLINK directly.
In addition change the do_carrier parameter in phy_link_down() to true.
If carrier was marked as up before (what should never be the case because
PHY was in state PHY_HALTED before) then we should mark it as down now.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If aneg is enabled and the PHY reports the link as up then definitely
aneg finished successfully. Therefore this check is useless and
can be removed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have multiple instances of VCS but only remember to invalidate the
BSD caches on the first, ignoring the stale caches of any other engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108140039.12254-1-chris@chris-wilson.co.uk
Since the function rxe_unregister_device always returns 0, it is changed
to void.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The variable rxe is only used in the function rxe_xmit_packet, and the
caller functions do not use it. So move this variable into the function
rxe_xmit_packet.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
link_down is self-explanatory.
rdma_sends and rdma_recvs count the number of RDMA Send and RDMA Receive
operations completed successfully. This is different from the existing
sent_pkts and rcvd_pkts counters because the existing counters measure
packets, not RDMA operations.
ack_deffered is renamed to ack_deferred to fix the spelling.
out_of_sequence is renamed to out_of_seq_request to make clear that it is
counting only requests and not other packets which can be out of sequence.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In ib_query_port(), use the netdev's IFF_UP flag to determine phys_state
(flag set = down = POLLING, flag clear = disabled = DISABLED).
Callers can then use the phys_state field to distinguish between links
which have a dead partner, cable missing, etc., from links which are
turned off on the local node. This is useful for HA and supportability.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Devices that does not use managed affinity can not export a vector
affinity as the consumer relies on having a static mapping it can map to
upper layer affinity (e.g. sw queues). If the driver allows the user to
set the device irq affinity, then the affinitization of a long term
existing entites is not relevant.
For example, nvme-rdma controllers queue-irq affinitization is determined
at init time so if the irq affinity changes over time, we are no longer
aligned.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Devices that does not use managed affinity can not export a vector
affinity as the consumer relies on having a static mapping it can map to
upper layer affinity (e.g. sw queues). If the driver allows the user to
set the device irq affinity, then the affinitization of a long term
existing entites is not relevant.
For example, nvme-rdma controllers queue-irq affinitization is determined
at init time so if the irq affinity changes over time, we are no longer
aligned.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_unref':
drivers/gpu/drm/radeon/radeon_object.c:317:24: warning:
variable 'rdev' set but not used [-Wunused-but-set-variable]
It not used any more after commit
e7e31600d3 ("drm/radeon: remove taking mclk_lock from radeon_bo_unref")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the paging queue for buffer functions to avoid contention
with the other queues.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Chen Gong <Curry.Gong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Whitespace cleanup.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For debugging purpose, it will be useful to expose the content of the
subparts_cpus as a read-only file to see if the code work correctly.
However, subparts_cpus will not be used at all in most use cases. So
adding a new cpuset file that clutters the cgroup directory may not be
desirable. This is now being done by using the hidden "cgroup_debug"
kernel command line option to expose a new "cpuset.cpus.subpartitions"
file.
That option was originally used by the debug controller to expose
itself when configured into the kernel. This is now extended to set an
internal flag used by cgroup_addrm_files(). A new CFTYPE_DEBUG flag
can now be used to specify that a cgroup file should only be created
when the "cgroup_debug" option is specified.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup-v2.rst file is updated to document the purpose of the new
"cpuset.sched.partition" flag and how its usage.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, cpuset.sched.partition returns the values, 0, 1 or -1 on
read. A person who is not familiar with the partition code may not
understand what they mean.
In order to make cpuset.sched.partition more user-friendly, it will
now display the following descriptive text on read:
"root" - A partition root (top cpuset of a partition)
"member" - A non-root member of a partition
"root invalid" - An invalid partition root
Note that there is at least one partition in the whole cgroup hierarchy.
The top cpuset is the root of that partition. The rests are either a
root if it starts a new partition or a member of a partition.
The cpuset.sched.partition file will now also accept "root" and
"member" besides 1 and 0 as valid input values. The "root invalid"
value is internal only and cannot be written to the file.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Because of the fact that setting the "cpuset.sched.partition" in
a direct child of root can remove CPUs from the root's effective CPU
list, it makes sense to know what CPUs are left in the root cgroup for
scheduling purpose. So the "cpuset.cpus.effective" control file is now
exposed in the v2 cgroup root.
For consistency, the "cpuset.mems.effective" control file is exposed
as well.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The generate_sched_domains() function is modified to make it work
correctly with the newly introduced subparts_cpus mask for scheduling
domains generation.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>