ChromeOS devices can have one optional dedicated port.
The Dedicated port is unique and similar to the USB PD ports
except that it doesn't support as many properties.
The presence of a dedicated port is determined from whether the
EC's charger port count is equal to 'number of USB PD port' + 1.
The dedicated port ID is always the last valid port ID.
This commit keeps compatibility with Embedded Controllers that do not
support the new EC_CMD_CHARGE_PORT_COUNT command by setting
the number of charger port to be equal to the number of USB PD port
when this command fails.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
A new more command has been added to the ChromeOS embedded controller
that allows to get the number of charger port count. Unlike
EC_CMD_USB_PD_PORTS, this new command also includes the dedicated
port if present.
This command will be used to expose the dedicated charger port
in the ChromeOS charger driver.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Immutable branch between mach-at91 and power-supply for driver
changes in at91-poweroff.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=n/Lz
-----END PGP SIGNATURE-----
Merge tag 'psy-at91-poweroff-immutable-for-v4.20-signed' into psy-next
Immutable branch for mach-at91 and power-supply for v4.20
Immutable branch between mach-at91 and power-supply for driver
changes in at91-poweroff.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There should be only one instance of struct shdwc in the system. This is
referenced through at91_shdwc. Return in probe if at91_shdwc is already
allocated.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Rename at91_shdwc_base member of struct shdwc to shdwc_base. There is
already an "at91" string in at91_shdwc object.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Make sclk part of struct shdwc to have all the data specific to SHDWC
grouped together in one structure.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Make mpddrc_base part of struct shdwc since there is also only one
instance of struct shdwc *at91_shdwc in system and to have all data
specific to SHDWC grouped together.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use only one poweroff function for sama5d2 and adapt it to work for both
scenarios (having LPDDR or not).
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The SAMA5D2 NRST input signal is resynchronized with the SLCK clock and it
can take up to 2 SLCK cycles (about 90us) for the internal reset to be
effective. During this delay, the VDDCORE current consumption may still be
high (application-dependent) with the VDDCORE regulator already OFF. Under
such conditions, VDDCORE may operate below its operating range leading to
potential register corruption.
To prevent such situation, it is recommended to decrease significantly the
power consumption of the device once the voltage regulator is turned-off.
This can be achieved by operating the device at a much lower low frequency.
To solve this switch the master clock to slock clock just before writing
shutdown command to shutdown controller.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Suggested-by: Patrice Vilchez <patrice.vilchez@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If kstrtoul() fails then we print "charge_full" when it's uninitialized.
The debug printk doesn't add anything so I deleted it and cleaned these
two functions up a bit.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This adds rate limiting to the message that is printed when reading a
power supply property via sysfs returns an error. This will prevent
userspace applications from unintentionally dDOSing the system by
continuously reading a property that returns an error.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The BQ2589x family has the capability of reading the current battery voltage.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The BQ25896 is almost identical to the BQ25890.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There are a few table entries that aren't used. Drop them.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
To ease adding a new part variant some debugging is handy.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Sync syscall to DAX file needs to flush processor cache, but it
currently does not flush to existing DAX files. This is because
'ext4_da_aops' is set to address_space_operations of existing DAX
files, instead of 'ext4_dax_aops', since S_DAX flag is set after
ext4_set_aops() in the open path.
New file
--------
lookup_open
ext4_create
__ext4_new_inode
ext4_set_inode_flags // Set S_DAX flag
ext4_set_aops // Set aops to ext4_dax_aops
Existing file
-------------
lookup_open
ext4_lookup
ext4_iget
ext4_set_aops // Set aops to ext4_da_aops
ext4_set_inode_flags // Set S_DAX flag
Change ext4_iget() to initialize i_flags before ext4_set_aops().
Fixes: 5f0663bb4a ("ext4, dax: introduce ext4_dax_aops")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Ext4 mount path calls .bmap to the journal inode. This currently
works for the DAX mount case because ext4_iget() always set
'ext4_da_aops' to any regular files.
In preparation to fix ext4_iget() to set 'ext4_dax_aops' for ext4
DAX files, add ext4_bmap() to 'ext4_dax_aops', since bmap works for
DAX inodes.
Fixes: 5f0663bb4a ("ext4, dax: introduce ext4_dax_aops")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
fan7 on NCT6796D does not have a fan count register; it only has an RPM
register. Switch to using RPM registers to read the fan speed for all
chips supporting it to solve the problem for good.
Reported-by: Robert Kern <ulteq@web.de>
Cc: Robert Kern <ulteq@web.de>
Fixes: 81820059a4 ("hwmon: (nct6775) Add support for NCT6796D")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Marking mmp bh dirty before writing it will make writeback
pick up mmp block later and submit a write, we don't want the
duplicate write as kmmpd thread should have full control of
reading and writing the mmp block.
Another reason is we will also have random I/O error on
the writeback request when blk integrity is enabled, because
kmmpd could modify the content of the mmp block(e.g. setting
new seq and time) while the mmp block is under I/O requested
by writeback.
Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
Here is another set of system call changes to prepare the change over to
64-bit time_t. As before, the strategy is to change system calls that
take a 'struct timespec' argument over to 'struct __kernel_timespec',
which for now is defined to be the same but will get redefined to use a
64-bit time_t argument once we are ready to modify the system call tables.
The major change from previous patches is that the plan is no longer
to directly use the 'compat' system calls for providing compatibility
with the existing 32-bit time_t based entry points. Instead, we rename
the compat code to something that makes more sense on 32-bit architectures,
e.g. compat_timespec becomes old_timespec32.
With the renamed types in place, we change over the 'stat' and 'utimes'
families of system calls, sched_rr_get_interval, recvmmsg and
rt_sigtimedwait. Another series for poll, select and io_pgetevents is
currently being tested.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XuMh
-----END PGP SIGNATURE-----
Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core
Pull more y2038 work from Arnd Bergman:
y2038: convert more syscalls
Here is another set of system call changes to prepare the change over to
64-bit time_t. As before, the strategy is to change system calls that
take a 'struct timespec' argument over to 'struct __kernel_timespec',
which for now is defined to be the same but will get redefined to use a
64-bit time_t argument once we are ready to modify the system call tables.
The major change from previous patches is that the plan is no longer
to directly use the 'compat' system calls for providing compatibility
with the existing 32-bit time_t based entry points. Instead, we rename
the compat code to something that makes more sense on 32-bit architectures,
e.g. compat_timespec becomes old_timespec32.
With the renamed types in place, change over the 'stat' and 'utimes'
families of system calls, sched_rr_get_interval, recvmmsg and
rt_sigtimedwait. Another series for poll, select and io_pgetevents is
currently being tested.
The recent removal of the memblock dependency from kvmclock caused a SEV
guest regression because the wall_clock and hv_clock_boot variables are
no longer mapped decrypted when SEV is active.
Use the __bss_decrypted attribute to put the static wall_clock and
hv_clock_boot in the .bss..decrypted section so that they are mapped
decrypted during boot.
In the preparatory stage of CPU hotplug, the per-cpu pvclock data pointer
assigns either an element of the static array or dynamically allocated
memory for the pvclock data pointer. The static array are now mapped
decrypted but the dynamically allocated memory is not mapped decrypted.
However, when SEV is active this memory range must be mapped decrypted.
Add a function which is called after the page allocator is up, and
allocate memory for the pvclock data pointers for the all possible cpus.
Map this memory range as decrypted when SEV is active.
Fixes: 368a540e02 ("x86/kvmclock: Remove memblock dependency")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Link: https://lkml.kernel.org/r/1536932759-12905-3-git-send-email-brijesh.singh@amd.com
kvmclock defines few static variables which are shared with the
hypervisor during the kvmclock initialization.
When SEV is active, memory is encrypted with a guest-specific key, and
if the guest OS wants to share the memory region with the hypervisor
then it must clear the C-bit before sharing it.
Currently, we use kernel_physical_mapping_init() to split large pages
before clearing the C-bit on shared pages. But it fails when called from
the kvmclock initialization (mainly because the memblock allocator is
not ready that early during boot).
Add a __bss_decrypted section attribute which can be used when defining
such shared variable. The so-defined variables will be placed in the
.bss..decrypted section. This section will be mapped with C=0 early
during boot.
The .bss..decrypted section has a big chunk of memory that may be unused
when memory encryption is not active, free it when memory encryption is
not active.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Radim Krčmář<rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Link: https://lkml.kernel.org/r/1536932759-12905-2-git-send-email-brijesh.singh@amd.com
When in effect, add "test_dummy_encryption" to _ext4_show_options() so
that it is shown in /proc/mounts and other relevant procfs files.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Pull x86 fixes from Ingol Molnar:
"Misc fixes:
- EFI crash fix
- Xen PV fixes
- do not allow PTI on 2-level 32-bit kernels for now
- documentation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/APM: Fix build warning when PROC_FS is not enabled
Revert "x86/mm/legacy: Populate the user page-table with user pgd's"
x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3
x86/xen: Disable CPU0 hotplug for Xen PV
x86/EISA: Don't probe EISA bus for Xen PV guests
x86/doc: Fix Documentation/x86/earlyprintk.txt
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: various scheduler metrics corner case fixes, a
sched_features deadlock fix, and a topology fix for certain NUMA
systems"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix kernel-doc notation warning
sched/fair: Fix load_balance redo for !imbalance
sched/fair: Fix scale_rt_capacity() for SMT
sched/fair: Fix vruntime_normalized() for remote non-migration wakeup
sched/pelt: Fix update_blocked_averages() for RT and DL classes
sched/topology: Set correct NUMA topology type
sched/debug: Fix potential deadlock when writing to sched_features
The following kernel log message is reported for the nct6775 driver
on ASUS WS X299 SAGE.
nct6775: Found NCT6796D or compatible chip at 0x2e:0x290
nct6775 nct6775.656: Invalid temperature source 11 at index 0,
source register 0x100, temp register 0x73
nct6775 nct6775.656: Invalid temperature source 11 at index 2,
source register 0x300, temp register 0x77
nct6775 nct6775.656: Invalid temperature source 11 at index 3,
source register 0x800, temp register 0x79
nct6775 nct6775.656: Invalid temperature source 11 at index 4,
source register 0x900, temp register 0x7b
A recent version of the datasheet lists temperature source 11 as reserved.
However, an older version of the datasheet lists temperature sources 10
and 11 as supported virtual temperature sources. Apparently the older
version of the datasheet is correct, so list those temperature sources
as supported.
Virtual temperature sources are different than other temperature sources:
Values are not read from a temperature sensor, but written either from
BIOS or an embedded controller. As such, each virtual temperature has to
be reported. Since there is now more than one temperature source, we have
to keep virtual temperature sources in a chip-specific mask and can no
longer rely on the assumption that there is only one virtual temperature
source with a fixed index. This accounts for most of the complexity of this
patch.
Reported-by: Robert Kern <ulteq@web.de>
Cc: Robert Kern <ulteq@web.de>
Fixes: 81820059a4 ("hwmon: (nct6775) Add support for NCT6796D")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Gen3 VSP used by the DU for display does not support the packed VYUY
pixel format. Gen2 VSP hardware is able to process this format, but
DU + VSP operation isn't enabled on Gen2, and VYUY isn't a strategic
format, so it can be ignored.
Remove the format from the capabilities of the DU driver.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The framebuffer pitch and alignment constraints reflect the limitations
of the Gen2 DU hardware. On Gen3, the DU has no memory interface and
thus doesn't impose any constraint. The limitations come instead from
the VSP that has a limit of 65535 bytes for the pitch and no alignment
constraint. Update the checks accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
This patch supports pixel format of RGB332, ARGB4444, XRGB4444,
BGR888, RGB888, BGRA8888, BGRX8888 and YVYU.
VYUY pixel format is not supported by H/W specification.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Reordered formats with RGB first]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R-Car Gen3 DU utilises the VSP1 hardware for memory access. The
limits on the RPF and WPF in this pipeline are 8190x8190.
Update the supported maximum sizes accordingly.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add support for the R-Car V3H (R8A77980) SoC to the LVDS encoder driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The ESCR and OTAR registers exist in each DU channel, but at different
offsets for odd and even channels. This led to usage of the group
register access API to write them, with offsets macros named ESCR/OTAR
and ESCR2/OTAR2 for the first and second ESCR/OTAR register in the group
respectively.
The names are confusing as it suggests that the ESCR/OTAR registers for
DU0 and DU2 are taken into account, especially with writes performed to
the group register access API.
Rename the offsets to ESCR/OTAR02 and ESCR/OTAR13, and use the CRTC
register access API to clarify the code. The offsets values are updated
accordingly.
Cosmetic patch, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Squashed ESCR and OTAR changes in a single commit]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Document and re-name the 'dpll_ch' field to a more precise 'dpll_mask' for
consistency with the 'channels_mask' field defined in 'struct
rcar_du_device_info'.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
DU channels not equipped with a DPLL use an SoC internal (provided by
the CPG) or external clock source combined with a DU internal divider to
generate the desired output dot clock frequency.
The current clock selection procedure does not fully exploit the ability
of external clock sources to generate the exact dot clock frequency by
themselves, but relies instead on tuning the internal DU clock divider
only, resulting in a less precise clock generation process.
When possible, and desirable, ask the external clock source for the
exact output dot clock frequency, and select the clock source that
produces the frequency closest to the desired output dot clock.
This patch specifically targets platforms (like Salvator-X[S] and ULCBs)
where the DU's input dotclock.in is generated by the versaclock VC5
clock source, which is capable of generating the exact rate the DU needs
as pixel clock output.
This patch fixes higher resolution modes which requires an high pixel
clock output currently not working on non-HDMI DU channel (such as
1920x1080@60Hz on the VGA output).
Fixes: 1b30dbde85 ("drm: rcar-du: Add support for external pixel clock")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
[Factor out code to a helper function]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
The DU channels that have a display PLL (DPLL) can only use external
clock sources, and don't have an internal clock divider (with the
exception of H3 ES1.x where the post-divider is present and needs to be
used as a workaround for a DPLL silicon issue).
Rework the clock configuration to take this into account, avoiding
selection of non-existing clock sources or usage of a missing
post-divider.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
The genweq_add_file and genwqe_del_file by caching current without
using reference counting embed the assumption that a file descriptor
will never be passed from one process to another. It even embeds the
assumption that the the thread that opened the file will be in
existence when the process terminates. Neither of which are
guaranteed to be true.
Therefore replace caching the task_struct of the opener with
pid of the openers thread group id. All the knowledge of the
opener is used for is as the target of SIGKILL and a SIGKILL
will kill the entire process group.
Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary
signal argument, update it's ownly caller, and use kill_pid
instead of force_sig.
The work force_sig does in changing signal handling state is not
relevant to SIGKILL sent as SEND_SIG_PRIV. The exact same processess
will be killed just with less work, and less confusion. The work done
by force_sig is really only needed for handling syncrhonous
exceptions.
It will still be possible to cause genwqe_device_remove to wait
8 seconds by passing a file descriptor to another process but
the possible user after free is fixed.
Fixes: eaf4722d46 ("GenWQE Character device and DDCB queue")
Cc: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Haverkamp <haver@linux.vnet.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Eberhard S. Amann <esa@linux.vnet.ibm.com>
Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Get rid of local @cpu variable which is unused in the
!CONFIG_IA32_EMULATION case.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1536806985-24197-1-git-send-email-zhongjiang@huawei.com
[ Clean up commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
A static checker gave the following warnings:
drivers/edac/sb_edac.c:1030 ibridge_get_ha() warn: signedness bug returning '(-22)'
drivers/edac/sb_edac.c:1037 knl_get_ha() warn: signedness bug returning '(-22)'
Both because the functions are declared to return a "u8", but try to
return -EINVAL for the error case.
Fix by returning 0xff (since the caller doesn't look at, or pass on, the
return value).
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180914201905.GA30946@agluck-desk
Signed-off-by: Borislav Petkov <bp@suse.de>
Fix build warning in apm_32.c when CONFIG_PROC_FS is not enabled:
../arch/x86/kernel/apm_32.c:1643:12: warning: 'proc_apm_show' defined but not used [-Wunused-function]
static int proc_apm_show(struct seq_file *m, void *v)
Fixes: 3f3942aca6 ("proc: introduce proc_create_single{,_data}")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jiri Kosina <jikos@kernel.org>
Link: https://lkml.kernel.org/r/be39ac12-44c2-4715-247f-4dcc3c525b8b@infradead.org
I thought the read-back of the DMA_ENABLE register was unnecessary
(at least it is working on my boards), then deleted it in commit
586a2c5290 ("mtd: nand: denali: squash denali_enable_dma() helper
into caller"). Sorry, I was wrong - it caused a timing issue on
Cyclone5 SoCFPGAs.
Revive the register read-back, commenting why this is necessary.
Fixes: 586a2c5290 ("mtd: nand: denali: squash denali_enable_dma() helper into caller")
Cc: <stable@vger.kernel.org>
Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
The batadv interfaces are virtual interfaces which just tunnel the traffic
over other ethernet compatible interfaces. It doesn't need serialization
during the tx phase and is using RCU for most of its internal
datastructures. Since it doesn't have actual queues which could be locked
independently, the throughput gets significantly reduced by the extra lock
in the core net code.
8 parallel TCP connections forwarded by an IPQ4019 based hardware over
5GHz could reach:
* without LLTX: 349 Mibit/s
* with LLTX: 563 Mibit/s
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
B.A.T.M.A.N. IV requires the number of rebroadcast from a neighboring
originator. These statistics are gathered per interface which transmitted
the OGM (and then received it again). Since an originator is not interface
specific, a resizable array was used in each originator.
This resizable array had an entry for each interface and had to be resizes
(for all OGMs) when the number of active interface was modified. This could
cause problems when a large number of interface is added and not enough
continuous memory is available to allocate the array.
There is already a per interface originator structure "batadv_orig_ifinfo"
which can be used to store this information.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
A private debug logging infrastructure is currently provided via
$debug_fs/batman_adv/*/log when CONFIG_BATMAN_ADV_DEBUG is enabled. This is
not well integrated in the rest of the tracing infrastructure of the
kernel.
Other components (like mac80211 or ath10k) allow to gather the debug
messages using generic trace events which are better integrated. This makes
it possible to interact with them using the existing userspace tools.
The tracepoint batadv:batadv_dbg will now be available when
CONFIG_BATMAN_ADV_DEBUG and CONFIG_BATMAN_ADV_TRACING is activated. The log
level mask is still used for filtering as usual.
A full system trace for offline parsing can be created (and read) using:
$ batctl ll all
$ trace-cmd record -e batadv:batadv_dbg
$ trace-cmd report
The same can also be done without recording to a file
$ batctl ll all
$ trace-cmd stream -e batadv:batadv_dbg
The trace infrastructure is especially helpful when tracing processes:
$ batctl ll all
$ ./tools/perf/perf trace --event "batadv:*" batctl p 10.204.32.1
0.000 batadv:batadv_dbg:batman_adv bat0 Parsing outgoing ARP REQUEST
0.045 batadv:batadv_dbg:batman_adv bat0 ARP MSG = [src: a2:64:14:53:f8:22-10.204.32.185 dst: 00:00:00:00:00:00-10.204.32.1]
0.067 batadv:batadv_dbg:batman_adv bat0 Entry updated: 10.204.32.185 a2:64:14:53:f8:22 (vid: -1)
0.099 batadv:batadv_dbg:batman_adv bat0 batadv_dat_select_candidates(): IP=10.204.32.1 hash(IP)=48902
0.757 batadv:batadv_dbg:batman_adv bat0 dat_select_candidates() 0: selected fe:2c:91:68:29:2b addr=48977 dist=65460
1.178 batadv:batadv_dbg:batman_adv bat0 dat_select_candidates() 1: selected fe:81:ab:c5:e3:03 addr=49181 dist=65256
1.809 batadv:batadv_dbg:batman_adv bat0 dat_select_candidates() 2: selected 66:25:a7:48:37:fb addr=49328 dist=65109
1.828 batadv:batadv_dbg:batman_adv bat0 DHT_SEND for 10.204.32.1
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
-----BEGIN PGP SIGNATURE-----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=YNSx
-----END PGP SIGNATURE-----
Merge tag '4.19-rc3-smb3-cifs' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Fixes for four CIFS/SMB3 potential pointer overflow issues, one minor
build fix, and a build warning cleanup"
* tag '4.19-rc3-smb3-cifs' of git://git.samba.org/sfrench/cifs-2.6:
cifs: read overflow in is_valid_oplock_break()
cifs: integer overflow in in SMB2_ioctl()
CIFS: fix wrapping bugs in num_entries()
cifs: prevent integer overflow in nxt_dir_entry()
fs/cifs: require sha512
fs/cifs: suppress a string overflow warning
Stable bugfixes:
- v4.17+: Fix a tracepoint Oops in initiate_file_draining()
- v4.17+: Fix a tracepoint Oops in initiate_file_draining()
- v4.11+: Fix an infinite loop on I/O
Other fixes:
- Return errors if a waiting layoutget is killed
- Don't open code clearing of delegation state
-----BEGIN PGP SIGNATURE-----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=C83+
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"These are a handful of fixes for problems that Trond found. Patch #1
and #3 have the same name, a second issue was found after applying the
first patch.
Stable bugfixes:
- v4.17+: Fix tracepoint Oops in initiate_file_draining()
- v4.11+: Fix an infinite loop on I/O
Other fixes:
- Return errors if a waiting layoutget is killed
- Don't open code clearing of delegation state"
* tag 'nfs-for-4.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Don't open code clearing of delegation state
NFSv4.1 fix infinite loop on I/O.
NFSv4: Fix a tracepoint Oops in initiate_file_draining()
pNFS: Ensure we return the error if someone kills a waiting layoutget
NFSv4: Fix a tracepoint Oops in initiate_file_draining()
modifies CC_FLAGS_FTRACE. The issue is that it breaks the dependencies
and causes "make targz-pkg" to rebuild the entire world.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW5w7nhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqoiAQCXoIkvallChR0KJW9zO5pfAjsLUT0d
CiMZ7Gins9GV0gD/WkByVRzXYqSc+pY435L1LK5ZROTRtQo3o/Zynzgo4ww=
=LtIq
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This fixes an issue with the build system caused by a change that
modifies CC_FLAGS_FTRACE. The issue is that it breaks the dependencies
and causes "make targz-pkg" to rebuild the entire world"
* tag 'trace-v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/Makefile: Fix handling redefinition of CC_FLAGS_FTRACE
- Fix a regression on systems having a DT without any phandles which
happens on a PowerMac G3.
-----BEGIN PGP SIGNATURE-----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=mlwN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fix from Rob Herring:
"One regression for a 20 year old PowerMac:
- Fix a regression on systems having a DT without any phandles which
happens on a PowerMac G3"
* tag 'devicetree-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fix phandle cache creation for DTs with no phandles