mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-20 19:23:40 +00:00
982,081 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David S. Miller
|
a8d5dd192a |
mlx5-updates-2020-12-01
mlx5e port TX timestamping support and MISC updates 1) Add support for port TX timestamping, for better PTP accuracy. Currently in mlx5 HW TX timestamping is done on CQE (TX completion) generation, which much earlier than when the packet actually goes out to the wire, in this series Eran implements the option to do timestamping on the port using a special SQ (Send Queue), such Send Queue will generate 2 CQEs (TX completions), the original one and a new one when the packet leaves the port, due to the nature of this special handling, such mechanism is an opt-in only and it is off by default to avoid any performance degradation on normal traffic flows. This patchset improves TX Hardware timestamping offset to be less than 40ns at a 100Gbps line rate, compared to 600ns before. With that, making our HW compliant with G.8273.2 class C, and allow Linux systems to be deployed in the 5G telco edge, where this standard is a must. 2) Misc updates and trivial improvements. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl/P0/EACgkQSD+KveBX +j5ETAf/Y6zPUHEk8mufD7RJaeQ/11gDtT3JKaPfcYBxaHs9VOPUTA2vemAZUuM0 0Rfsrv25PeLjvBtE2wCyA/gZ9naEeE2UELHR6FKEipnrnT+b2JD/dYG9Nb7EiARw zu8djoOza/bLLKvNew+VAr1P0+of0IIkD7NXqRTnUTnATQubLYm/AF7TGhINIa8H xXnBHu1C7Lz8Ow2f6IBA1ntrGoWApdyuXpHJQlJvwgpPLXkD10GEoqXk3LtP11/J KCAKDdMAlChydCo2rmruwwCM0z3Gjl86uffIbLE0bbJJGk3Gpkq12B2aUk/l3Xzj Y3RtiMHTgqaqo9AVjBPI435mw/LPvA== =kvQC -----END PGP SIGNATURE----- Merge tag 'mlx5-updates-2020-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-updates-2020-12-01 mlx5e port TX timestamping support and MISC updates 1) Add support for port TX timestamping, for better PTP accuracy. Currently in mlx5 HW TX timestamping is done on CQE (TX completion) generation, which much earlier than when the packet actually goes out to the wire, in this series Eran implements the option to do timestamping on the port using a special SQ (Send Queue), such Send Queue will generate 2 CQEs (TX completions), the original one and a new one when the packet leaves the port, due to the nature of this special handling, such mechanism is an opt-in only and it is off by default to avoid any performance degradation on normal traffic flows. This patchset improves TX Hardware timestamping offset to be less than 40ns at a 100Gbps line rate, compared to 600ns before. With that, making our HW compliant with G.8273.2 class C, and allow Linux systems to be deployed in the 5G telco edge, where this standard is a must. 2) Misc updates and trivial improvements. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Arnd Bergmann
|
d23e629717 |
A few more RGMII-ID fixes
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX8+ocQAKCRDj7w1vZxhR xYTCAQDuwJCQDbBh5+UFsWUBPnphCTo53H9kxY/GO/g6fw4gNAD+NhV1F8l53n+e jCmnANqbNP1T/blps9RJgMsw57NvRAY= =xWDk -----END PGP SIGNATURE----- Merge tag 'sunxi-fixes-for-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes * tag 'sunxi-fixes-for-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id Link: https://lore.kernel.org/r/2a351c9c-470f-4c5e-ba37-80065ae0586d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
4f9f1415bb |
arm64: dts: amlogic updates for v5.11, round 2
- audio support for several more boards - PHY timing fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl/P0pIACgkQWTcYmtP7 xmUYRQ//R7B1Qh94p79Lj8swFQxzjJJutIaw5weI/xeZ2V9kGp21+IXtj7btM2PF JyCYhnP4iuvsehRXd5FzK2Q2YQR3wsKMx7yzO9mD7I6pFkvhEOwDIDwzz+NV76SU yU2eNHjE07TyKwGfbbo2Gt4UkXIB0Hv6cHsHzRo9HswsR3bZ1lznytvnBf8ZQUeR QQxXvZeA/BHAgsvCqHsOcXnnzcRR8PUQ9rtPVeIL6RB0yzQaZ590jWsLXW2LTPHr l13KkJ+/+izkTua3QI3CSMv85RydTN6RTWkc+1/WxA5uGgl6Sj3fj8B8117tIVR5 3WAMDtp7qYYBfXSfV+xWg3ov1EQOPYri6pOHaco8YZgA0jxHolHJIF0dUXQLWzGg HByQIwpZ5ZGw2179dVg/UwPeKUKHxWOudxsFA5SIAMAlpbsHeXShkfjB5Pd1tS42 COHjyrX47h8zoD0Il0nNDNU//+GYP52RmDpsSakxNIP/dXYt/OzDeCgo1gipPOdd W1FBb1VKQKJbxlLGrSWdeB4A13uY2XKeQcjac1Dd0sQ48A0lvseK1MLe8Q92KmPh vBFpq1qqjJUl8hbywC99xqTiXwUE2QxzmXS3uLmu6+VpHJiMx0eVIilOkTLdbveZ Mu1lQFEvucd7w6cYVDICUg37O8zuP3ZA0pZXllpFFc0xZCe5Fmc= =0cIr -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.11, round 2 - audio support for several more boards - PHY timing fixes * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add i2c3/rtc nodes and vrtc alias to GT-King/GT-King-Pro arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements arm64: dts: meson: g12a: x96-max: fix PHY deassert timing requirements ARM: dts: meson: fix PHY deassert timing requirements arm64: dts: meson: fix PHY deassert timing requirements arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements arm64: dts: meson: minor fixups for Khadas VIM/VIM2 dts arm64: dts: meson: add audio playback to wetek-play2 arm64: dts: meson: add audio playback to wetek-hub arm64: dts: meson: add audio playback to odroid-c2 arm64: dts: meson: add audio playback to nanopi-k2 arm64: dts: meson: add audio playback to khadas-vim2 arm64: dts: meson: add audio playback to khadas-vim arm64: dts: meson: add audio playback to a95x arm64: dts: meson-axg: add GE2D node Link: https://lore.kernel.org/r/7ho8j4gkxo.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
b4e217d0b3 |
Samsung DTS ARM changes for v5.11, part three
1. S3C bindings and DTS cleanup,
2. Correct the clock rates for SPI0 in Artik 5 which is a fix for recently
introduced Ethernet on SPI on Artik 5 board.
-----BEGIN PGP SIGNATURE-----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=7AY9
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.11, part three
1. S3C bindings and DTS cleanup,
2. Correct the clock rates for SPI0 in Artik 5 which is a fix for recently
introduced Ethernet on SPI on Artik 5 board.
* tag 'samsung-dt-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Reduce assigned-clocks entries for SPI0 on Artik5 board
ARM: dts: s3c6410: correct SMDK6410 board compatible
ARM: dts: s3c24xx: add SMDK2416 board compatible
dt-bindings: arm: samsung: document S3C6410-based boards binding
dt-bindings: arm: samsung: document SMDK2416 board binding
Link: https://lore.kernel.org/r/20201207074528.4475-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
4569830224 |
Veyron backlight fix, another fix for dtbs-check and some additions
to the rk3288-based VMARC boards. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl/NHWkQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgVlcB/wIdj41vGWslMZcShijb+QeW5W6bYus3WkX Zvl+RDGccGbjDH6UEKP+XETXR2tgKfXSooiO8YKjEV9L/fnfMZQWQh3rPg8SA39b f2N7JTnB7YCasZU4XXeQtqB6TKRubAZixUxEWibY1l1mwb+izPeij73PptjEMgsm jkVOjwX4lWhfISbVf2Nl5d6KWfbJgPgqu0yA7kIDlRDOvmsxh8vQyByHaTltoa/+ slLEGn0B+7kMEdGSdL6TgGQ1jwF1WPGoBokl7CnTsNzBkzQIm2wVnbvzZNY/5oI4 2HCR8ihpqjDxy84Dx3mmlVCl6uGCG8ipHSpLubg3rvqRhA2w1fes =oBVw -----END PGP SIGNATURE----- Merge tag 'v5.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Veyron backlight fix, another fix for dtbs-check and some additions to the rk3288-based VMARC boards. * tag 'v5.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add SDIO0 node for VMARC SOM ARM: dts: rockchip: Add rtc node for VMARC SOM ARM: dts: rockchip: rename wdt nodename to watchdog on rv1108 ARM: dts: rockchip: Remove 0 point from brightness-levels on rk3288-veyron Link: https://lore.kernel.org/r/4582475.GXAFRqVoOG@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Linus Torvalds
|
c6f7e1510b |
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull sparc64 csum fix from Al Viro: "Fix for a brown paperbag regression in sparc64" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression fix] really dumb fuckup in sparc64 __csum_partial_copy() changes |
||
|
Arnd Bergmann
|
261078ab90 |
Newly added boards are the PX30 SOM system from Engicam and Kobol Helios64.
The Scarlet tablet finally gets support for its cameras, now that the the rk3399-isp moved out of staging. The Odroid-Go-Advance got its joystick support now that the adc-joystick driver was merged and misc omprovements to the RockPi4, rk3328-roc-cc and orange-pi. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl/NIB8QHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgSkWB/9XzLgxka9y6ntWV6+dlhHJQ/KnlvFwIH0m o/thgqAd6ns0ey0pYEpQ8Hj6piMHuNWuqIq0S6u19ssv/CPK38lpbrcx+rPnXyd5 Vvu5KiXtMILPBTz4M0wSNuUfjGtvYvud86OcFKEc8AgWHKs7S8OoxaoRWr2CE+bH L4wMUQIsafT0iZEe/PoNl8HwfaNWbf1/5qjhW6oD+DVc0ssbWEdOwDTzwb0rgsK0 LSgxX+j/qlP57mS5b2CRot18C7meep4EvHcQII2JtHnbY7dgzuqENTI5utTj/q9c MtwUNWOlSFUpuu4tMiPf9C29hOoQfWsaW+r9yrsO84Yl+U04TYT9 =84Fb -----END PGP SIGNATURE----- Merge tag 'v5.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Newly added boards are the PX30 SOM system from Engicam and Kobol Helios64. The Scarlet tablet finally gets support for its cameras, now that the the rk3399-isp moved out of staging. The Odroid-Go-Advance got its joystick support now that the adc-joystick driver was merged and misc omprovements to the RockPi4, rk3328-roc-cc and orange-pi. * tag 'v5.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (28 commits) arm64: dts: rockchip: use USB host by default on rk3399-rock-pi-4 arm64: dts: rockchip: fix I2S conflict on rk3399-rock-pi-4 arm64: dts: rockchip: fix supplies on rk3399-rock-pi-4 arm64: dts: rockchip: Fix UART pull-ups on rk3328 arm64: dts: rockchip: add isp and sensors for Scarlet arm64: dts: rockchip: add isp0 node for rk3399 arm64: dts: rockchip: Properly define the type C connector on rk3399-orangepi arm64: dts: rockchip: Add BT support on px30-engicam arm64: dts: rockchip: Add WiFi support on px30-engicam arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF arm64: dts: rockchip: Enable LVDS panel on px30-engicam-edimm2.2 arm64: dts: rockchip: Enable USB Host, OTG on px30-enagicam arm64: dts: rockchip: rename sdhci nodename to mmc on rk3399 arm64: dts: rockchip: Enable analog audio on rk3328-roc-cc arm64: dts: rockchip: Enable HDMI audio on rk3328-roc-cc arm64: dts: rockchip: Set dr_mode to "host" for OTG on rk3328-roc-cc arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 arm64: dts: rockchip: Add Engicam C.TOUCH 2.0 dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 ... Link: https://lore.kernel.org/r/4278011.LvFx2qVVIh@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
f8ff2f057e |
AT91 DT for 5.11 #2:
- switch to new TCB PWM bindings - rework ADC bindings - fix sama5d2 securam and can1 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl/MNUMACgkQ2wIijOdR NOV5Kw/9GqV12iNTx1com+sz1NcnWC3owpk9KNBL8WmvxWtCE2N0qyHg16gsFSMy b0lrmnO/xH8BlQNVICOLsPhY1RJpSSqqSCdO/HvlWb1kYJytU7Hc2ruVPbfH5K2K qJ8BvyNUvE9bN/TZtuiTwYOid0TnuS1D4bH/Zvoy7OPw9yyUZA0CMgAu/f/dw3Yl smmrC5ws2ZM/AxfqnMIQVrRzYrUaOr15sCb1uqqMDJ1mSXmWDUHsNLp75ZMpTVnd Dsi4wgmpkE1HDeAEorcHKwuRbpmCVxFHPd5TdsRUq94KItr/SfjkEBLFvZnF5mw9 A9RzbqqBYqBJQmeKfUzC1c3K1fQ0Akueb9pNcdDjkkse2+TFKKLrKbL/chp8gAvJ Y3uAhsh1rYTrFRPEaP0+ObXCvjtfWX7bvL/1eil1a3rtW76BEWZuqxIbvmOR4mqq YQnyWp3Sr7YhaGR6D2BxjYyg3Ky1nHCWgUMU3iSNe0YedqEGOU2epdwPLsEToILn 1srKfWE3i/Dw5YoQrnScPE8Er2U9iUApoDORGcGONW4KS5lWyOFFwPhz+JX7VWgo aj9KiPLLVz3b78NDOqb/UUIfqNqTukFAeMZ6gG//9DRu1R9e9t5dnaDegMSDFKv5 u4A7jMi7JDG8EOWIrFSmUYaWUVYe4EH9MkZOrORxrjW0kxBWfL4= =Dw4H -----END PGP SIGNATURE----- Merge tag 'at91-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.11 #2: - switch to new TCB PWM bindings - rework ADC bindings - fix sama5d2 securam and can1 * tag 'at91-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: fix CAN message ram offset and size ARM: dts: at91: sama5d2: map securam as device ARM: dts: at91: sam9x60ek: remove bypass property ARM: dts: at91: remove deprecated ADC properties ARM: dts: at91: at91sam9rl: fix ADC triggers ARM: dts: at91: sama5d3: use proper ADC compatible ARM: dts: at91: kizbox: switch to new pwm-atmel-tcb binding Link: https://lore.kernel.org/r/20201206013840.GA627225@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
1a0e1943d8 |
Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug"
This reverts commit
|
||
|
Arnd Bergmann
|
49d47bf9f5 |
i.MX arm64 device tree changes for 5.11:
- New board support: LX2162A QDS, Kontron i.MX8M Mini SoMs and baseboards. - A number of patches from Adam Ford to add various audio devices for i.MX8MM/MN and update imx8mm-beacon-som board on QSPI NOR and RTC. - Correct WDOG_B pin configuration for i.MX8MM/MN/MP. - A series from Ioana Ciornei complete the MAC/PCS/PHY representation on DPAA2 devices. - Add PMU device for i.MX8MP/MN. - Add IR and CAN support for i.MX8MP/MN/MM EVK board. - Adjust GIC CPU mask to match number of CPUs for i.MX8MP/MN/MM. - A series of patch from Michael Walle to update LS1028A support with addition of CAN and OPTEE, also ENETC PTP and FlexSPI clock input correction. - Add SPDIF sound card support on imx8mq-evk board. - Misc random updates and device additions. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl/HoBgUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM5KUQf8Dby60Z9z0QtFSzjGNr9MaHMerP7/ 9qtngN9PTUTjdAviCCg8tORU9+knjnRe/gOTjIbeWWHUTsG6sKNFBrEtqoCCT7Sz RUm+cdYcg2FEiIV5p4xwCbrvKt3ISLud6qyTk3HkTkknUNDZfhuv3QPPSrH8Zc0l 526D6gkHJW9DqHt8XFHT4l3OJNHN7QAw/z16dVueseons+Uhz3eUxG9keUpQhH6F mBoqfTkMx2JtHnsdG/8V1BFbc2Kry7HhZkK+96wb+LoZ0TtK7h7SR6iFoVFu3dnB ugDmkzG8TPzjAt9oSGy9+vgNXqIZwpRa+DiXvjWuaAoaI9/c3QDsWmS44g== =asj6 -----END PGP SIGNATURE----- Merge tag 'imx-dt64-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree changes for 5.11: - New board support: LX2162A QDS, Kontron i.MX8M Mini SoMs and baseboards. - A number of patches from Adam Ford to add various audio devices for i.MX8MM/MN and update imx8mm-beacon-som board on QSPI NOR and RTC. - Correct WDOG_B pin configuration for i.MX8MM/MN/MP. - A series from Ioana Ciornei complete the MAC/PCS/PHY representation on DPAA2 devices. - Add PMU device for i.MX8MP/MN. - Add IR and CAN support for i.MX8MP/MN/MM EVK board. - Adjust GIC CPU mask to match number of CPUs for i.MX8MP/MN/MM. - A series of patch from Michael Walle to update LS1028A support with addition of CAN and OPTEE, also ENETC PTP and FlexSPI clock input correction. - Add SPDIF sound card support on imx8mq-evk board. - Misc random updates and device additions. * tag 'imx-dt64-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits) arm64: dts: imx8mm-beacon-som: Assign PMIC clock arm64: dts: imx8mm-beacon-som: Configure RTC aliases arm64: dts: imx8mn: Add node for SPDIF arm64: dts: imx8mn: Add support for micfil arm64: dts: imx8mn: Add SAI nodes arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter arm64: dts: ls1028a: make the eMMC and SD card controllers use fixed indices arm64: dts: freescale: update calibration table for TMU module arm64: dts: freescale: sl28: combine SPI MTD partitions arm64: dts: ls1028a: add optee node arm64: dts: ls1028a: fix FlexSPI clock input arm64: dts: ls1028a: fix ENETC PTP clock input arm64: dts: imx: Fix imx8mm-kontron-n801x-s.dtb target arm64: dts: imx8mn-evk: add IR support arm64: dts: imx8mm-evk: add IR support arm64: dts: imx8mq-evk: add linux,autosuspend-period property for IR arm64: dts: imx8mp-evk: add CAN support arm64: dts: imx8mq-evk: Add spdif sound card support arm64: dts: imx8mq: Configure clock rate for audio plls arm64: dts: layerscape: Add PCIe EP node for ls1088a ... Link: https://lore.kernel.org/r/20201202142717.9262-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
aa66be3bff |
i.MX device tree update for 5.11:
- New board support: imx6dl-alti6p, imx6dl-lanmcu, mx6qp-prtwd3, imx6ul-phytec-segin and imx7d-flex-concentrator. - Fix schema warnings for pwm-leds, watchdog and GPIO hog devices. - A few patches from Krzysztof Kozlowski to correct compatibles for i.MX6/7 boards. - A series from Matthias Schiffer to polish imx7-mba7 board support. - Update i.MX6/7 device trees for fsl,stop-mode support. - Correct fsl,rcpm-wakeup of LS1021A to get flextimer wake-up work. - A series of patch from Stefan Riedmueller to update phytec and segin devices. - Other small and random changes. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl/HmQEUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM4ddwgAmoQFJuz/g7QRj0WFvyIofeiQSM/G 0MLlaiVo0JLW9+0iQmscmLSyWpPqNGTew+zkOzKnfUevIWygt32q6SJhxWM5KMpL Xuj7Aix3PE6Vz6luFtITMHq4Mve3W//98jwL9+pTG2QGt7RYqiMsW+eRQbrj7W/6 sQeUQqXA4LKnqhlHq88iAHqEKFECpF/u3AtrtbD3YSHAlNn+HG0Hh/bI5DK595Q4 apQES1uQaUspVcXeU3c0KSAEUW7BejtzybA/RNli9Z+Fg65B1XQfLvif24AIZ4yG dQ7KUCnYyDUGV6NI3Xjz1muwGh3y/MzaQZMraNQfx0mm2GCayysjX/yGzw== =SdR/ -----END PGP SIGNATURE----- Merge tag 'imx-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree update for 5.11: - New board support: imx6dl-alti6p, imx6dl-lanmcu, mx6qp-prtwd3, imx6ul-phytec-segin and imx7d-flex-concentrator. - Fix schema warnings for pwm-leds, watchdog and GPIO hog devices. - A few patches from Krzysztof Kozlowski to correct compatibles for i.MX6/7 boards. - A series from Matthias Schiffer to polish imx7-mba7 board support. - Update i.MX6/7 device trees for fsl,stop-mode support. - Correct fsl,rcpm-wakeup of LS1021A to get flextimer wake-up work. - A series of patch from Stefan Riedmueller to update phytec and segin devices. - Other small and random changes. * tag 'imx-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits) ARM: dts: imx28: Fix label name for L2 switch ARM: dts: add Protonic WD3 board ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequency ARM: dts: imx7: add support for kamstrup flex concentrator ARM: dts: ls1021a: update calibration table for TMU module ARM: dts: ls1021a: fix rcpm failed to claim resource ARM: dts: ls1021a: fix flextimer failed to wake system ARM: dts: imx50-kobo-aura: Enable eKTF2132 touchscreen ARM: dts: imx: Change flexcan node name to "can" ARM: dts: imx6q-pico: fix board compatibles ARM: dts: add Van der Laan LANMCU board ARM: dts: add Altesco I6P board ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-source ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL ARM: dts: imx50-kobo-aura: Add 'grp' suffix to pinctrl node names ARM: dts: imx: add usb alias ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driver ARM: dts: imx: Fix schema warnings for pwm-leds ARM: dts: imx7s-warp: correct vendor in compatible to Element14 ... Link: https://lore.kernel.org/r/20201202142717.9262-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
3eaac3aed2 |
i.MX DT bindings update for 5.11:
- Quite some patches that update vendor-prefixes.yaml and fsl.yaml to document missing board compatibles and add new board compatibles. - A couple of patches from Dong Aisheng to update imx-scu firmware and imx-lpcg clock bindings for new SCU two cells clock support. - A couple of net bindings update from Ioana Ciornei to complete the MAC/PCS/PHY representation on DPAA2 devices. - Document watchdog compatibles for all i.MX and Layerscape devices. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl/HlOYUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM4yegf/eP6henuph6c+Ay/y7Ia4V51UY4ot Sb9pJatgaX4GmFowfztltd//gJMtpHnYbqAsXhk2hkRZ7h0hFIIji2Dp7knq3naD rQykAmT4eWy1CuQFq86XvFaqHc5AVuygBpMmP6nSFDBzBeqDRQ+q813aUpQdUlUH iAeN2Ov62U+4kEc0AxF2mNNcGW1/ikKcFT5nJmJGmgUKuwSUSJ0l09MvXHhQeEjr //gswg/5XU4tweEjAHeEJKM60XLtRFdmoLnz/0nDlLY0BXfBYRpicvNXzxDWEPOd qdf20NOWyz2UUcmMgy1vpVJKHQumSDNxB9M0FwtkcB8+x0YjE4gB8AxUNA== =YiM1 -----END PGP SIGNATURE----- Merge tag 'imx-bindings-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.11: - Quite some patches that update vendor-prefixes.yaml and fsl.yaml to document missing board compatibles and add new board compatibles. - A couple of patches from Dong Aisheng to update imx-scu firmware and imx-lpcg clock bindings for new SCU two cells clock support. - A couple of net bindings update from Ioana Ciornei to complete the MAC/PCS/PHY representation on DPAA2 devices. - Document watchdog compatibles for all i.MX and Layerscape devices. * tag 'imx-bindings-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits) dt-bindings: arm: fsl: add Protonic WD3 board dt-bindings: vendor-prefixes: add "virtual" prefix dt-bindings: fsl: add kamstrup flex concentrator to schema dt-bindings: arm: fsl: document i.MX7S boards dt-bindings: arm: fsl: document SolidRun LX2160A boards dt-bindings: arm: fsl: document LS1012A FRWY board dt-bindings: arm: fsl: add Van der Laan LANMCU board dt-bindings: arm: fsl: add Altesco I6P board dt-bindings: vendor-prefixes: Add an entry for Altus-Escon-Company dt-bindings: net: add the 10gbase-r connection type dt-bindings: net: add the DPAA2 MAC DTS definition dt-bindings: fsl: add compatible for LX2162A QDS Board dt-bindings: vendor-prefixes: Add an entry for Van der Laan b.v. dt-bindings: arm: fsl: document i.MX7D boards dt-bindings: arm: fsl: document i.MX6ULL boards dt-bindings: arm: fsl: document i.MX6UL boards dt-bindings: arm: fsl: document i.MX6SX boards dt-bindings: arm: fsl: document i.MX6SL boards dt-bindings: arm: fsl: document i.MX6QP boards dt-bindings: arm: fsl: document i.MX6Q boards ... Link: https://lore.kernel.org/r/20201202142717.9262-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
1e3e7ca547 |
arm64: dts: amlogic updates for v5.11
- AXG SoCs: add/enable PCIe & USB OTG support - AXG SoCs: add MIPI DSI support - Khadas VIM: add RTC - several cleanups & fixups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl/GxC4ACgkQWTcYmtP7 xmUbdA/+IA2JJZg9q2u0xJmePsft6QTwLqIiDRp970jfooVSLqSPz7xYhdlWiXR5 Gxzyv6Kyd0Nw/G16Ffl6sPs30/lMI8OYsR/imOqc8SYTRvUE/4gy0xXEd8aLWSU4 2g4B8k985WIEeRNz/788SoGvtpA+zXMmS7EHNczoyQaihfywE56fYaM/TjT+pi+a prrCxdiRCX8DGOjB6ynR8efQyguUxRhOKx5sJZnaymY5NhaYl0ZUjRNR8iqhkFj0 SLSGghTal5PcweVSDWMuZbtxaCtf6v3dnZ9ohzS0w25U7xnNoVVQX/OMjA19ZLDt SX2QcS5fCr1BcTfSxsw8zXrbPAqGlrb1PlWdf9uneHf02ze38P7FZSQFhyjzM+1v L9aZgSbvg4jJ/H/p8HFyxuf3ynQMzadRkhcfGo5sUfGWDgwG6189tNjpTPD3BSub CguzUOSuIfml/8KnS0S5aI0NCXyESprHfNwZQyvz6FdgXxdtF38twwKgpmUHUoxA uw5bzpJgrpF7PM9OpmP/yCfETj4EQ++hQyosJNeAweIrt+VIkQ/OW4SZ5dBrwB3k R0rCU80E5gpNBrmmY7AvbjCv91DH2xzxz7/w2FZmt5vs5KBxRCPnCkeRwor0n+sT asQ0YMUoMnJqCbay8ditaARhCvNQCfNe8w+KDrr2MqnCi/PLYLw= =XtmV -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.11 - AXG SoCs: add/enable PCIe & USB OTG support - AXG SoCs: add MIPI DSI support - Khadas VIM: add RTC - several cleanups & fixups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-sm1: fix typo in opp table arm64: dts: meson: add KHAMSIN IR remote node to SML5442TW arm64: dts: meson: update the Khadas VIM3/3L LED bindings arm64: dts: meson: fix spi-max-frequency on Khadas VIM2 arm64: dts: meson: add rtc aliases to meson-khadas-vim3.dtsi arm64: dts: meson: Add capacity-dmips-mhz attributes to GXM arm64: dts: meson-axg-s400: enable PCIe M.2 Key E slots arm64: dts: meson-axg: add PCIe nodes arm64: dts: meson-axg: add MIPI DSI PHY nodes arm64: dts: meson-axg: add PWRC node arm64: dts: meson: enable rtc node on Khadas VIM1/VIM2 boards dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding dt-bindings: clk: axg-clkc: add Video Clocks arm64: dts: meson: add watchdog to g12-common dtsi arm64: dts: meson: remove empty lines from aml-s905x-cc v2 dts Link: https://lore.kernel.org/r/7heek9jgox.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
96631a0d11 |
Samsung DTS ARM64 changes for v5.11
1. Several cleanups, including aligning node names with dtschema.
2. Add WiFi/PCIe to TM2 boards (Exynos5433).
3. Correct restart and shutdown of Exynos7 boards, as part of Paweł
Chmiel Exynos7420 mainlining effort.
-----BEGIN PGP SIGNATURE-----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=sxn6
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.11
1. Several cleanups, including aligning node names with dtschema.
2. Add WiFi/PCIe to TM2 boards (Exynos5433).
3. Correct restart and shutdown of Exynos7 boards, as part of Paweł
Chmiel Exynos7420 mainlining effort.
* tag 'samsung-dt64-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Drop incorrect use of io-channel-ranges property
arm64: dts: exynos: use hyphens in Exynos5433 node names
arm64: dts: exynos: Correct psci compatible used on Exynos7
arm64: dts: exynos: Include common syscon restart/poweroff for Exynos7
arm64: dts: exynos: add the WiFi/PCIe support to TM2(e) boards
arm64: dts: exynos: remove redundant status=okay in Exynos5433 TM2
arm64: dts: exynos: adjust node names to DT spec in Exynos7 Espresso
arm64: dts: exynos: adjust node names to DT spec in Exynos5433 TM2
arm64: dts: exynos: Harmonize DWC USB3 DT nodes name
Link: https://lore.kernel.org/r/20201201204404.22675-3-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
ff741319bc |
Samsung DTS ARM changes for v5.11, part two
1. Add devicetree of Samsung Galaxy Note 10.1 tablets
(GT-N8010/GT-N8013), called P4 Note. These are quite old but
still functional devices, based on Exynos4412.
2. Minor cleanups in Odroid XU3 Ethernet.
3. Minor fixes: ADC io-channel-ranges and P4 Note touchscreen GPIO
polarity.
-----BEGIN PGP SIGNATURE-----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=FN69
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.11, part two
1. Add devicetree of Samsung Galaxy Note 10.1 tablets
(GT-N8010/GT-N8013), called P4 Note. These are quite old but
still functional devices, based on Exynos4412.
2. Minor cleanups in Odroid XU3 Ethernet.
3. Minor fixes: ADC io-channel-ranges and P4 Note touchscreen GPIO
polarity.
* tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: switch Atmel mxt reset GPIO to active low on P4 Note
ARM: dts: s5pv210: Drop unneeded io-channel-ranges property in Aries
ARM: dts: s5pv210: Drop incorrect use of io-channel-ranges property
ARM: dts: exynos: Drop incorrect use of io-channel-ranges
ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards
dt-bindings: arm: samsung: document bindings for P4 Note family board
ARM: dts: exynos: Add an alias for the Ethernet interface on Odroid XU3
ARM: dts: exynos: Fix Ethernet interface description on Odroid XU3
Link: https://lore.kernel.org/r/20201201204404.22675-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
30912c3ce6 |
ARM: dts: Keystone DTS update for v5.11
- HDMI Support - Analog Audio data support -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJfxphsAAoJEHJsHOdBp5c/yPEP/jjEJdSQ2HHF0OQAiiWeMyfA ZACvYgmSfUq6Xo74QHinthLShQ7hUDF+OHJO7lhLSdPxUwjJxr4WlvqMSwSMlV7R GiyjjGKWCX/6+N5AWWnBJplkWgdZhbdUmdT7L5EzxBBdWYTuf129kEMVynkCQx3V gKn9gweeBkAUqXnDm7dyFqZ5xukiEE/yFmcF5+5gDHN1S2AT7ji8qxkNfh5Pm2kt X8Po2/901NuJMnw9uh5H/Azkz9B112QCDOHMzubDLKfDCNbBaWFA22bb1tJD9r4W o7BGSq2gEn8bMx1QN5Kq0riMeShSAdZc6biCK4Hk/MnstJjjLK+DjTOs1MzuXGrr BPGsagMI1IWu9oQILo8mShlkJlCcvb6/peJ813wmwsm5REO+Lm2sQNCbbYAI9bOA RCdKR8Mg8jIjw9MyasVPGxBTSTC+wKjLG4u6kKVgCWjBnwSsEWwZbyq3sSmN+Vj1 aSp/oti4kwPCnwRM4iAklHlpAesQZokypWWdXnc1Ce+CUMK9nShe3My1CXEVLQzA oFQWsscr4171vPLDfZM8bvAyXxSSKVXzU186NY+8lQEPgsVp73yFC5RUwOWU+joc HRT4xGdWYmi9j+aOG0Jb+PMz8Q/lXSKoGfqNeWU4QLtdcmtJyn8FVV13oPyAxZUp R8GNAN+t/EHOK1Uw726f =pR0E -----END PGP SIGNATURE----- Merge tag 'keystone_dts_for_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt ARM: dts: Keystone DTS update for v5.11 - HDMI Support - Analog Audio data support * tag 'keystone_dts_for_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2g-evm: add HDMI and analog audio data Link: https://lore.kernel.org/r/1606851472-26593-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
David S. Miller
|
9756bb63e8 |
Merge branch 'stmmac-fixes'
Joakim Zhang says: ==================== patches for stmmac A patch set for stmmac, fix some driver issues. ChangeLogs: V1->V2: * add Fixes tag. * add patch 5/5 into this patch set. V2->V3: * rebase to latest net tree where fixes go. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Fugang Duan
|
f119cc9818 |
net: stmmac: overwrite the dma_cap.addr64 according to HW design
The current IP register MAC_HW_Feature1[ADDR64] only defines
32/40/64 bit width, but some SOCs support others like i.MX8MP
support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64].
So overwrite dma_cap.addr64 according to HW real design.
Fixes:
|
||
|
Fugang Duan
|
5f58591323 |
net: stmmac: delete the eee_ctrl_timer after napi disabled
There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.
It is safe to delete the timer after napi disabled and disable lpi mode.
Fixes:
|
||
|
Fugang Duan
|
4ec236c7c5 |
net: stmmac: free tx skb buffer in stmmac_resume()
When do suspend/resume test, there have WARN_ON() log dump from
stmmac_xmit() funciton, the code logic:
entry = tx_q->cur_tx;
first_entry = entry;
WARN_ON(tx_q->tx_skbuff[first_entry]);
In normal case, tx_q->tx_skbuff[txq->cur_tx] should be NULL because
the skb should be handled and freed in stmmac_tx_clean().
But stmmac_resume() reset queue parameters like below, skb buffers
may not be freed.
tx_q->cur_tx = 0;
tx_q->dirty_tx = 0;
So free tx skb buffer in stmmac_resume() to avoid warning and
memory leak.
log:
[ 46.139824] ------------[ cut here ]------------
[ 46.144453] WARNING: CPU: 0 PID: 0 at drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3235 stmmac_xmit+0x7a0/0x9d0
[ 46.154969] Modules linked in: crct10dif_ce vvcam(O) flexcan can_dev
[ 46.161328] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 5.4.24-2.1.0+g2ad925d15481 #1
[ 46.170369] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 46.175677] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 46.180465] pc : stmmac_xmit+0x7a0/0x9d0
[ 46.184387] lr : dev_hard_start_xmit+0x94/0x158
[ 46.188913] sp : ffff800010003cc0
[ 46.192224] x29: ffff800010003cc0 x28: ffff000177e2a100
[ 46.197533] x27: ffff000176ef0840 x26: ffff000176ef0090
[ 46.202842] x25: 0000000000000000 x24: 0000000000000000
[ 46.208151] x23: 0000000000000003 x22: ffff8000119ddd30
[ 46.213460] x21: ffff00017636f000 x20: ffff000176ef0cc0
[ 46.218769] x19: 0000000000000003 x18: 0000000000000000
[ 46.224078] x17: 0000000000000000 x16: 0000000000000000
[ 46.229386] x15: 0000000000000079 x14: 0000000000000000
[ 46.234695] x13: 0000000000000003 x12: 0000000000000003
[ 46.240003] x11: 0000000000000010 x10: 0000000000000010
[ 46.245312] x9 : ffff00017002b140 x8 : 0000000000000000
[ 46.250621] x7 : ffff00017636f000 x6 : 0000000000000010
[ 46.255930] x5 : 0000000000000001 x4 : ffff000176ef0000
[ 46.261238] x3 : 0000000000000003 x2 : 00000000ffffffff
[ 46.266547] x1 : ffff000177e2a000 x0 : 0000000000000000
[ 46.271856] Call trace:
[ 46.274302] stmmac_xmit+0x7a0/0x9d0
[ 46.277874] dev_hard_start_xmit+0x94/0x158
[ 46.282056] sch_direct_xmit+0x11c/0x338
[ 46.285976] __qdisc_run+0x118/0x5f0
[ 46.289549] net_tx_action+0x110/0x198
[ 46.293297] __do_softirq+0x120/0x23c
[ 46.296958] irq_exit+0xb8/0xd8
[ 46.300098] __handle_domain_irq+0x64/0xb8
[ 46.304191] gic_handle_irq+0x5c/0x148
[ 46.307936] el1_irq+0xb8/0x180
[ 46.311076] cpuidle_enter_state+0x84/0x360
[ 46.315256] cpuidle_enter+0x34/0x48
[ 46.318829] call_cpuidle+0x18/0x38
[ 46.322314] do_idle+0x1e0/0x280
[ 46.325539] cpu_startup_entry+0x24/0x40
[ 46.329460] rest_init+0xd4/0xe0
[ 46.332687] arch_call_rest_init+0xc/0x14
[ 46.336695] start_kernel+0x420/0x44c
[ 46.340353] ---[ end trace bc1ee695123cbacd ]---
Fixes:
|
||
|
Fugang Duan
|
36d18b5664 |
net: stmmac: start phylink instance before stmmac_hw_setup()
Start phylink instance and resume back the PHY to supply
RX clock to MAC before MAC layer initialization by calling
.stmmac_hw_setup(), since DMA reset depends on the RX clock,
otherwise DMA reset cost maximum timeout value then finally
timeout.
Fixes:
|
||
|
Fugang Duan
|
9d14edfdea |
net: stmmac: increase the timeout for dma reset
Current timeout value is not enough for gmac5 dma reset on imx8mp platform, increase the timeout range. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Arnd Bergmann
|
6ce23595b5 |
Qualcomm DT updates for 5.11
This adds support for SD card, WiFi, LED, touchscreeni, touchkey and fuel gauge to the Samsung Galaxy S5. Nexus 5 also gains fuel gauge support. Finally IPQ6016 gains support for the QPIC NAND controller. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl/FP/0bHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FGD0P/izpx+KKodHihjPWuKXk cPWMwkbARIB2XfkrsATT02jFBy579k4G2XETWlZwk4697gXXIf26TmJMOmlivWk4 7ESdmOh4oplJyKcIr0TED/lpRkEx5it5jOhVQMTqOaQOJ5R95x2aoXq3CZnwfZI2 EPSq+sfpws72PhlalDZIKPpwSbfu4XtSBErecsbJOShQJ1nvZgYC/++PLR7LFNM6 t701MlWljlY7twYIlfeeyrcTZ8oI/j8s1Zt8AkINAwIbxv2x1m1Grf8k05a8Kez2 oRZQEdC03lvck17YOAXw3GxWAnzFqSQ8OSyldg3eJZA2Ze3wLfG0Agq5zq55fT1X 1wHeE9+ygD7gxXgo6HVCaTGttuP47rDWFT/6Lj9Qf+qZnYKDhThrFALxmxgZyFZV Y3QFrk021RyfOTaWIyVZ4PmJTQu/PoTY7IAKUM7GXf2obgxx5stjSC++r3Hue1uX EDAb+5hhV7weVu9XaOakXt6YufPrChZl9G8NcK27bnvUIy2LQsB8n7ah33AlMsh7 cPI/JyDcwkKDtf+JXSZ5W0oX5y0zDC8MWrF0D0TFEfykYyvwsVYX2u0U0ntqMBnz ZpFVE9gPaY61+AVOsJf2TV25wuLa5GfNCibnKHqeWyYJaR4jJX3Sux8gkYK9GF3c vOqRnWSM1apriVDN+JVFS+WF =J3Nk -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DT updates for 5.11 This adds support for SD card, WiFi, LED, touchscreeni, touchkey and fuel gauge to the Samsung Galaxy S5. Nexus 5 also gains fuel gauge support. Finally IPQ6016 gains support for the QPIC NAND controller. * tag 'qcom-dts-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: ipq6018: Add the QPIC peripheral nodes ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges ARM: dts: qcom: msm8974-lge-nexus5: Add fuel gauge ARM: dts: qcom: msm8974-klte: Add fuel gauge ARM: dts: qcom: msm8974-klte: Add support for SD card ARM: dts: qcom: msm8974-klte: Add support for wifi ARM: dts: qcom: msm8974-klte: Add gpio expander chip ARM: dts: qcom: msm8974-klte: Add support for led ARM: dts: qcom: msm8974-klte: Add support for touchscreen ARM: dts: qcom: msm8974-klte: Add support for touchkey ARM: dts: qcom: msm8974-klte: Merge pinctrl nodes Link: https://lore.kernel.org/r/20201130190148.345302-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
a39d2ef78d |
Qualcomm ARM64 DT updates for 5.11
For SM8250 the recently introduced support for handling boot-loader stream mappings in the ARM SMMU allow us to enable this, and thereby USB controller and PHY, SDHCI controller and FastRPC, as well as support for the SM8250 HDK board has been added. Additionally PRNG and RTC is enabled. Similarly for SM8150, the ARM SMMU could be added which allows the secondary USB controller and PHYs, as well as WiFi to be added and support for the SM8150 HDK board to be introduced. Additionally Coresight and support for the last-level cache controller was added. MSM8916 finally has VDDCX and VDDMX removed as regulators and are now handled by the rpmpd driver for the devices controlling them. The Longsheer L8150 gains touchscreen, sensors, vibrator and LED support. MSM8992 gains USB and SDHCI support as well as an I2C controller and the associated RMI4 based touchscreen for the Lumia 950. MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm support. Then support for the Lumia 950 XL is added. SDM845 gains interconnect properties for a number of devices and the GENI wrappers gains iommu stream configuration, which means DMA operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the SMMU enabled, a few fixes and the description of the eDP bridge and panel means that the laptop can now boot mainline with working display, GPU, WiFi and audio. SC7180 gains a slew of smaller improvements and fixes. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl/FP0cbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FINAP/11hbDNRXJ+3oqLk53aD /8G0Xbyzy9gekpYURZwJJrjaGY7l1psM39Kbo+flUPusFfxRBNmbWrw57PPbzjyS d3RnPXuc/XDkOvCHtQstowtdKBl5EIXU6ec9xg4RY5bZUiD5Fpk8OLBAitvruEqy 6YCgMhy5yRspb8iBXA5N4ERU0EsQBOMIIoP6DRuGkeMkUhk/QllO+xwAr6ugI3Ot s3gua4tjWfi5kxT0bXklU4fk7Xeiuy6VL+giddd4dWVUm2GdO7jRlU6ae6CLoi2k PStZJcca8uOpTMpF4ZqMLNX51UAk+VZsCvjMm5pYIQAWCp15sWyMA20wi8vM+cjx HHhsXU7WAqQfLzMntgUd36CJaTuGw8J+QzQyNpQeHjbL6tAA15BfnIIQ+RUZWgsx XoPWdSvmUBhyo9g2cR7yXRXQGxvMRy/w7uHgv6Szb9KkDxeBnpYMjBMrbaZAsyMA YoYvhdIO9HkL2IbUxQgiszQsD58aDvauEY+KpOZclVW5ODPhJmsSTZK2aH/L6kj9 6hn0rOBrXy8rZE5Vs08C5D2WvqZ0Ib45vXNpb9uucvyXXNZMywGw+94B3YMNbkCz /C9C1DJcRX1NZjJnQco3Cn0Ni7AmRzD5aAHi3n2BhxbsxOxZ6v0SjEDbce+lXwYJ 5l4AcPSLDjGXFJsbUPQrHvJF =lkn4 -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for 5.11 For SM8250 the recently introduced support for handling boot-loader stream mappings in the ARM SMMU allow us to enable this, and thereby USB controller and PHY, SDHCI controller and FastRPC, as well as support for the SM8250 HDK board has been added. Additionally PRNG and RTC is enabled. Similarly for SM8150, the ARM SMMU could be added which allows the secondary USB controller and PHYs, as well as WiFi to be added and support for the SM8150 HDK board to be introduced. Additionally Coresight and support for the last-level cache controller was added. MSM8916 finally has VDDCX and VDDMX removed as regulators and are now handled by the rpmpd driver for the devices controlling them. The Longsheer L8150 gains touchscreen, sensors, vibrator and LED support. MSM8992 gains USB and SDHCI support as well as an I2C controller and the associated RMI4 based touchscreen for the Lumia 950. MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm support. Then support for the Lumia 950 XL is added. SDM845 gains interconnect properties for a number of devices and the GENI wrappers gains iommu stream configuration, which means DMA operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the SMMU enabled, a few fixes and the description of the eDP bridge and panel means that the laptop can now boot mainline with working display, GPU, WiFi and audio. SC7180 gains a slew of smaller improvements and fixes. * tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (93 commits) arm64: dts: qcom: c630: Define eDP bridge and panel arm64: dts: qcom: c630: Fix pinctrl pins properties arm64: dts: qcom: c630: Polish i2c-hid devices arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver arm64: dts: sdm845: Add interconnect properties for QUP interconnect: qcom: sdm845: Add the missing nodes for QUP dt-bindings: interconnect: sdm845: Add IDs for the QUP ports arm64: dts: qcom: c630: Expose LID events arm64: dts: qcom: c630: Re-enable apps_smmu dts: qcom: sdm845: Add dt entries to support crypto engine. arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FD arm64: dts: qcom: sdm845: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: limit IPA iommu streams arm64: dts: qcom: sm8150: Add Coresight support arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite arm64: dts: qcom: sc7180-trogdor: add "pen-insert" label for trogdor arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor ... Link: https://lore.kernel.org/r/20201130190131.345187-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
e40917e466 |
Devicetree changes for TI K3 platforms for v5.11 merge window:
- Standardized usage of "disabled" only in board.dts files, #interrupt-cells warning fixups, node format error fixes - J721E: R5F support, MMC/SD UHS mode added - AM654: R5F support, dss marked coherent, drop unused dma-ring-reset-quirk property - J7200: ADC support, Mailbox, hwspinlock -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl/FKtUACgkQ3bWEnRc2 JJ2SaBAArDEu+ulsXnB9jsTW6OUP2f184AM2LPQYcv0SZRF6e51NXbpY2slbkAgm 2Vn29bz5EnDMoO0J9ONOhrC52PJ1KVmGJnJukK7fGdqQujXjbuCignziRsuSlMXX hDRL52oY0BPI9MQN7ueQAOe2RKPPsL5OHRi5SssFwMZ2P9RArQ4/eP9hQ4gfcsAh XmW8Z8OIEEV0QQujQjhPTYJWy7ujU/FSiOHF7GtDcGx0scuvv7NkGzqHIpsKqx8+ Jfd3hc7qxTvfrHppYNyoUXnc6axzEWPDDpHqZ2umpffxXh46sBQ+fjMDBg+d7R1d 79J+WbnPFZucIbpOuy92/8fVlnZfHv4s1ymAi3bC4RriRfo8aHhhtFqR+VSSWlH1 UCYIn7ddiqo854jys4eclUaKRRRDUqH/BPQyKZQN6KmDjhA+mctz3Ih5hUtpm7Xd cV5MS8ltNatSU98Yfne3ubKbUdw3NAIOdwp2lwattAc1TIx3RCB79Lv1X2rRU4Oy 4qUOlhLDuewioFo1m9vwfZi5qqw7kImfyXXix4gmLxsnIp3Og7IpvdbIGZK+ctej Lp9Qa6XZx+2ddhB28RnTmguhNFAfsi9W7c/ZrXd0TeZdClB0FwV+tX/APssEWpQv 19fMF1/Ps/WznQsimS4JVB1MNzh1y6z5nvWGEjdoLQBsvQa3Xqo= =Alsn -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt Devicetree changes for TI K3 platforms for v5.11 merge window: - Standardized usage of "disabled" only in board.dts files, #interrupt-cells warning fixups, node format error fixes - J721E: R5F support, MMC/SD UHS mode added - AM654: R5F support, dss marked coherent, drop unused dma-ring-reset-quirk property - J7200: ADC support, Mailbox, hwspinlock * tag 'ti-k3-dt-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (25 commits) arm64: dts: ti: k3-j721e-common-proc-board: Add support for SD card UHS modes arm64: dts: ti: k3-j721e-main: Add output tap delay values arm64: dts: ti: k3: squelch warning about lack of #interrupt-cells arm64: dts: ti: k3-j7200-common-proc-board: Correct the name of io expander on main_i2c1 arm64: dts: ti: k3-j7200-som-p0: main_i2c0 have an ioexpander on the SOM arm64: dts: ti: k3-j7200-som-p0: Add IPC sub-mailbox nodes arm64: dts: ti: k3-j7200-main: Add mailbox cluster nodes arm64: dts: ti: k3-j7200-main: Add hwspinlock node arm64: dts: ti: am65/j721e/j7200: Mark firmware used uart as "reserved" arm64: dts: ti: k3-am654-base-board: Fix up un-necessary status set to "okay" for USB arm64: dts: ti: am65/j721e: Fix up un-necessary status set to "okay" for crypto arm64: dts: ti: k3-j721e*: Cleanup disabled nodes at SoC dtsi level arm64: dts: ti: k3-am65*: Cleanup disabled nodes at SoC dtsi level arm64: dts: ti: k3-j7200-mcu-wakeup: Enable ADC support arm64: dts: ti: k3-am65*/j721e*: Fix unit address format error for dss node arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for R5Fs arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to R5Fs arm64: dts: ti: k3-j721e-main: Add MAIN domain R5F cluster nodes arm64: dts: ti: k3-j721e-mcu: Add MCU domain R5F cluster node arm64: dts: ti: k3-am654-base-board: Reserve memory for IPC between R5F cores ... Link: https://lore.kernel.org/r/20201130174258.ljsiokkyr7x7tsbd@covenant Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
a2f9886a9e |
mvebu dt64 for 5.11 (part 1)
- Add support for IEI Puzzle-M801 board (Armada 8040 based)
- Add support ESPRESSObin-Ultra (Armada 3720 based)
- Clean-up and improve espressobin device tree
- Switch to per-port SATA interrupts on CP110 based SoC
- Use compliant node name for USB3 on CP110 based SoC
- Add heartbeat LED on mcbin singleshot
- Disable SMMU by default for Armada 7040 and 8040 to continued
supporting custom bot firmware
- Turris mox:
- add 3W power capability to SFP cage
- update ethernet-phy handle name
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCX8UWegAKCRALBhiOFHI7
1c5BAJ4ilmwKGPP5eFE+fCfEjzxvskL3mQCdFKOIraWngVbX+GCAZ2UhZfYT6cA=
=G+GT
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.11 (part 1)
- Add support for IEI Puzzle-M801 board (Armada 8040 based)
- Add support ESPRESSObin-Ultra (Armada 3720 based)
- Clean-up and improve espressobin device tree
- Switch to per-port SATA interrupts on CP110 based SoC
- Use compliant node name for USB3 on CP110 based SoC
- Add heartbeat LED on mcbin singleshot
- Disable SMMU by default for Armada 7040 and 8040 to continued
supporting custom bot firmware
- Turris mox:
- add 3W power capability to SFP cage
- update ethernet-phy handle name
* tag 'mvebu-dt64-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: armada-3720-turris-mox: add 3W power capability to SFP cage
arm64: dts: marvell: keep SMMU disabled by default for Armada 7040 and 8040
arm64: dts: mcbin-singleshot: add heartbeat LED
arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name
arm64: dts: marvell: espressobin: Update link to V7 schematic
arm64: dts: armada-3720-turris-mox: update ethernet-phy handle name
arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts
arm64: dts: marvell: add DT for ESPRESSObin-Ultra
arm64: dts: marvell: espressobin: Add support for LED2
arm64: dts: marvell: Add a device tree for the IEI Puzzle-M801 board
arm64: dts: marvell: espressobin: De-duplicate eMMC definitions
arm64: dts: marvell: espressobin: Get rid of duplicate serial aliases
arm64: dts: marvell: espressobin: Simplify v7 ethernet port labeling
Link: https://lore.kernel.org/r/87eekaj0i4.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
9bc08aa60f |
mvebu dt for 5.11 (part 1)
- Add support for MikroTik CRS3xx switches
- Add support for RD-AC3X-48G4X2XL board : Armada 382 SoC connected
to Prestera AC3X ASIC through PCI
- Clean-up kirkwood device tree: replace "ok" by "okay"
- Improve device tree for PCA953x gpio expander nodes
- Use compliant node name for USB3 on armada 375
- 98dx3236 SoCs:
- remove non-existent i2c1
- add i2c0 pinctrl information
- Improve device tree for Turris Omnia
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCX8USAwAKCRALBhiOFHI7
1fPtAJ9ZTaAA9sFNNfaig+Df5mgrdjgzHgCgjXCBEt3sr1e2CmAkLfGiVyOzt/4=
=55Sy
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.11 (part 1)
- Add support for MikroTik CRS3xx switches
- Add support for RD-AC3X-48G4X2XL board : Armada 382 SoC connected
to Prestera AC3X ASIC through PCI
- Clean-up kirkwood device tree: replace "ok" by "okay"
- Improve device tree for PCA953x gpio expander nodes
- Use compliant node name for USB3 on armada 375
- 98dx3236 SoCs:
- remove non-existent i2c1
- add i2c0 pinctrl information
- Improve device tree for Turris Omnia
* tag 'mvebu-dt-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: mvebu: Add device tree for RD-AC3X-48G4X2XL board
arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name
ARM: dts: turris-omnia: remove unneeded status = "okay" properties
ARM: dts: turris-omnia: update ethernet-phy node and handle name
ARM: dts: turris-omnia: add LED controller node
ARM: dts: turris-omnia: add SFP node
ARM: dts: turris-omnia: describe switch interrupt
ARM: dts: turris-omnia: add comphy handle to eth2
ARM: dts: turris-omnia: enable HW buffer management
ARM: dts: Add i2c0 pinctrl information for 98dx3236
ARM: dts: Remove non-existent i2c1 from 98dx3236
ARM: dts: armada: align GPIO hog names with dtschema
ARM: dts: dove: fix PCA95xx GPIO expander properties on A510
ARM: dts: kirkwood: replace status value "ok" by "okay"
ARM: dts: mvebu: Add CRS328-4C-20S-4S board
ARM: dts: mvebu: Add CRS305-1G-4S board
ARM: dts: mvebu: Add CRS326-24G-2S board
Link: https://lore.kernel.org/r/87h7p6j0m7.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
f458d69bf7 |
Nuvoton device tree updates for 5.11
- New machines
* Fii Kudo, a NPCM730 BMC
* Quanta GSJ, a NPCM750 BMC
* Qanta Olympus RunBMC, a NPCM750 BMC
- Updates to the common device trees and NCPM750 EVB
-----BEGIN PGP SIGNATURE-----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=19Ki
-----END PGP SIGNATURE-----
Merge tag 'nuvoton-5.11-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
Nuvoton device tree updates for 5.11
- New machines
* Fii Kudo, a NPCM730 BMC
* Quanta GSJ, a NPCM750 BMC
* Qanta Olympus RunBMC, a NPCM750 BMC
- Updates to the common device trees and NCPM750 EVB
* tag 'nuvoton-5.11-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
dt-bindings: vendor-prefixes: Add FII
ARM: dts: nuvoton: Add Fii Kudo system
ARM: dts: nuvoton: Add NPCM7xx RunBMC Olympus Quanta machine
ARM: dts: nuvoton: Add Quanta GSJ BMC
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Nuvoton NPCM730 device tree
ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB
ARM: dts: nuvoton: Add new device nodes
ARM: dts: nuvoton: Add pinctrl and GPIO node
ARM: dts: nuvoton: Modify timer register size
ARM: dts: nuvoton: Modify clock parameters
Link: https://lore.kernel.org/r/CACPK8Xd8RaLv_p6t9ckBwCwtZww+2YYOAoAYQdvni0dxc2mS7A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
5161540797 |
mt8173:
- add new power domain controller node mt8183: - add new power domain controller - add display, iommu and dsi nodes mt8192: - add basic support, pinctrl, uart, spi, i2c and timer mt8516: - add auxadc, efuse and usb nodes mt8167: - add basic support for the SoC - add support for the pumkin board mt6779: - add initial support, interrupt controller, clocks, uart mt7622: - PWM node for all available PWM channels -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl/EC2oXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH6e9BAAkG3psWVaYuiHUnlEbIvIWFPx pCS7KV0J5kXe3F/oEAlQWDHiipAEVMyr9ABXnALfwjoqy7hAV6g775COLfZMR/ia oxBtYWKbKE3/6LSLr6F9l4bJKvox/qpd7hWCkDW3/2xZ2zzZLZo7BPU0o6kHXQAr ZdgtFx9Fxy1q2BIo/GP7wXmSt6dl+O9XTGAt/Hx3U2jQ5PMrQDblICbiEYFLSotR I58Nw7vKDrQ6bFQfXSOza5FjNoGswzB8wEzi3etEcSsYvinwhuTkqhVAs7kYgxqJ mp93ydrM2hsTy71p4kEA7uNaGKIrBPkzLVmwt3tWZ7nh/BE6IXt6hIWIUgHX4igL e31BG7u3IkYAwFMV9XJ5KZL37oQwF5UytrrwLIxN+dmozcfF1nd/r0VxJQkmfQ00 DUQvqhPUKAGJDgFNK5f+Kh3A+8JIkZpxN6GxqUdKitlgA1hUTbafaVXKG0fcADsu 8wRO6+JA0/pL36QU+3zPrLC6FinZGoPa9lWCdP0YmXOLTw3BGoa9nwkvwIMvcw2X 3aKIOBWglxds3XYVMP+bWrWV3sat1vFIh03lK/gbhci2h2WFdpDfZ+wFu7Y2WNAf DQP45UkGI/sN+1MpDWfpK/oxVWMwxCNoEtOhHCDXBMh/6ysjmrRTbm1vqLLaNYQP WYzIYR/BaYpJQUz+xUM= =DU+G -----END PGP SIGNATURE----- Merge tag 'v5.10-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - add new power domain controller node mt8183: - add new power domain controller - add display, iommu and dsi nodes mt8192: - add basic support, pinctrl, uart, spi, i2c and timer mt8516: - add auxadc, efuse and usb nodes mt8167: - add basic support for the SoC - add support for the pumkin board mt6779: - add initial support, interrupt controller, clocks, uart mt7622: - PWM node for all available PWM channels * tag 'v5.10-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (25 commits) dts64: mt7622: disable spi1 and uart2 because pins are used by pwm dts64: mt7622: enable all pwm for bananapi r64 arm64: dts: mt8183: Add display nodes for MT8183 arm64: dts: mt8183: Add iommu and larb nodes arm64: dts: mt8183: Add dsi node arm64: dts: mt8183: Add pwm and backlight node arm64: dts: mediatek: Add mt8183 power domains controller arm64: dts: mediatek: Add smi_common node for MT8183 arm64: dts: mediatek: Add mt8173 power domain controller dt-bindings: power: Add MT8192 power domains dt-bindings: power: Add MT8183 power domains dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile arm64: dts: mediatek: add MT8167 pumpkin board dts arm64: dts: mediatek: add dtsi for MT8167 dt-bindings: arm64: dts: mediatek: Add mt8167-pumpkin board arm64: dts: mediatek: mt8516: add efuse node arm64: dts: mediatek: align GPIO hog names with dtschema arm64: dts: mediatek: mt8516: add usb1 node arm64: dts: mediatek: mt8516: rename usb phy ... Link: https://lore.kernel.org/r/72fe1c4f-f27c-c455-dfd9-66bde90bb295@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Heiner Kallweit
|
0aec75a596 |
PCI: Reduce pci_set_cacheline_size() message to debug level
Drivers like ehci_hcd and xhci_hcd use pci_set_mwi() and emit an annnoying message like the following that results in user questions whether something is broken: xhci_hcd 0000:00:15.0: cache line size of 64 is not supported Root cause of the message is that on several chips the Cache Line Size register is hard-wired to 0. Change this message to debug level; an interested caller can still inform the user (if deemed helpful) based on the return code. Link: https://lore.kernel.org/r/be1ed3a2-98b9-ee1d-20b8-477f3d93961d@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Arnd Bergmann
|
1c202d0c5a |
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.11, please pull the following: - Rafal adds initial support for the Broadcom 4908 which are SoCs used in home routers and are based on the DSL architecture and using Broadcom Brahma-B53 CPUs. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl/Ce8YACgkQh9CWnEQH BwQnhw/9GQHgXy+ZSI5a8mak8eUzK/dwrtdMvtCuERLK6sMvTBJSmuejYoWwzF27 e+t0rm40Ly2JhxfBdrx6Y/uWxAvXUgFE5Wd//ukY8+G9rHDDvY2KtYxb9V0wjM7L 4ye0ghYtK1snZRWa5DBNyn4b8UPOCETGqysOQ3hUlSzIL4zzY2OjAXarKAfv4lHJ Qj5zRYj0I+KMHBNLa0nryz2fLy3HGVevAMapJ6Sm/sL4feLTX7FkhT9GLpTQXGk6 9ou3g5ywOZ2P8ic1wldxuPCMGsTYu53MVpRmnuDec68PzGYTfYrd3zyDcTQEh8am UtGV/Wo7HwTdGR1KDUEgIbEbf5bSm+vaohEwc/XLziQMf9cCJ+cIushaWb2r/IY4 EDWD9nYN9z+kJe+05wtWZ4JeXQjL0lajVSpTTSn4oAVcoEl7ixLepqY2uDRl7jFl iJhyzvuJOinxJ8Ggs6S0eYgAVrIEZNUrsT6J9MrumXrcAJQPoBMppEPdWeIPkWMn hlfWDn7MyWil1+PeCnB9VCgtTq1XlAHzcXXHzdZqJhdHQwi200NmJioEC/M2dJ2Q EG/jAmytRJ5N9KFwqTnuVwn581FUdgxDxmTyXw2pr6hafqOou4APqDwmJw8QcBcf QLsIJ+3iPyPT52P4zymTKEN22YD768JrRWa1pItAGObzGitlUBE= =oz5b -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 5.11, please pull the following: - Rafal adds initial support for the Broadcom 4908 which are SoCs used in home routers and are based on the DSL architecture and using Broadcom Brahma-B53 CPUs. * tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: add config for Broadcom BCM4908 SoCs arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files dt-bindings: arm: bcm: document BCM4908 bindings Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
c8b53b1c6b |
This pull request contains Broadcom ARM-based SoCs changes for 5.11,
please pull the following: - Vivek updates the Linksys EA9500 DTS by adding the two additional switch port nodes (5 & 7), providing a flash partition layout to make the device usable with OpenWrt, and finally switches to using the pin controller rather than using mdio-mux to get the same outcome. - Serge fixes the USB Device Tree nodes unit name to be conformant to the recommended name patterns. - Rafal re-arranges all the nodes that belonged to the CRU block to be under the CRU node (such as PLLs). He also disables the USB3 PHY node for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150 DTS. - Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC DTSI. - Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the Raspberry Pi 4 due to some cross-talk between the two blocks. - Pavel updates the DWC2 USB controller RX FIFO sizes to be more accurate for all BCM283x (Raspberr Pi) SoCs. - Florian updates all BCM5301x and NSP Device Tree files to allow switching the Broadcom B53 Ethernet switch device tree binding to YAML. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl+9i0cACgkQh9CWnEQH BwRLLBAApKr8uw8YxinKC2FlktnR+7/j3fOI/wmlfrqfqJRPxng1YIOFfBrvopSi S/0nJZXbSnsqJxnu9YEo5grl/ZTtADuBIpOa2AFvf4JgeIrCW/jkJ1shrh/Flg8U XnSh9VjSPpM4074spdwyQ7BvGAsiEk3Z71Bv8rArM81sHvLprqE61HeO30F4c8Ca UaJef7eypnEw0YOsibmphpmoYIjhA53nzZi1d9sTMZMvoaN4/JRj54i97glMPwmh g7338yVrKdrtf7xg9Q/zFt+yZZ1GeeafbrkEivG6NsXW69WNaDJAFbF+SwcPjNW4 vLXQp9xjz2cKzQHQcoFpGuSmscTmTli1IaEUl3jU8e9GPgpaRyNkvKoZEHnGvT5u 3Hrmi3uXn5IS3oO0PgDYLJXISrD02gEzFmuXx5cfDMM9qDIYS0pXndbgulhjxMQi e4W2yeXP9NpLAVBOdJftDY5+AgH5ddZOJ5c5nRF9C3DENhvBuzqCVgalKM4AYA/z PjlRkjwIVblRHxYJO1S0rTLN51qHwvc/XVaWqVKz4P9zOW1UtbLEZALFVSnv1RFz /VyJMupGB6J2U/6ig+2YyfRoDvopgYtEm7F4i3Xza9pBWj+tpO71ncFMGTUd4omM jOC36Fti336TvqJyR2wJ9JAdf/035QZnikFz89t8PA6pDcCkRWw= =oWAD -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs changes for 5.11, please pull the following: - Vivek updates the Linksys EA9500 DTS by adding the two additional switch port nodes (5 & 7), providing a flash partition layout to make the device usable with OpenWrt, and finally switches to using the pin controller rather than using mdio-mux to get the same outcome. - Serge fixes the USB Device Tree nodes unit name to be conformant to the recommended name patterns. - Rafal re-arranges all the nodes that belonged to the CRU block to be under the CRU node (such as PLLs). He also disables the USB3 PHY node for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150 DTS. - Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC DTSI. - Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the Raspberry Pi 4 due to some cross-talk between the two blocks. - Pavel updates the DWC2 USB controller RX FIFO sizes to be more accurate for all BCM283x (Raspberr Pi) SoCs. - Florian updates all BCM5301x and NSP Device Tree files to allow switching the Broadcom B53 Ethernet switch device tree binding to YAML. * tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux: (22 commits) dt-bindings: net: dsa: b53: Add YAML bindings ARM: dts: NSP: Provide defaults ports container node ARM: dts: NSP: Add a SRAB compatible string for each board ARM: dts: NSP: Fix Ethernet switch SGMII register name ARM: dts: NSP: Update ethernet switch node name ARM: dts: BCM5301X: Provide defaults ports container node ARM: dts: BCM5301X: Add a default compatible for switch node ARM: dts: BCM5301X: Update Ethernet switch node name dt-bindings: net: dsa: Document sfp and managed properties dt-bindings: net: dsa: Extend switch nodes pattern ARM: dts: bcm283x: increase dwc2's RX FIFO size ARM: dts: rpi-4: disable wifi frequencies ARM: dts: Cygnus: Drop incorrect io-channel-ranges property. ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150 ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3 ARM: dts: BCM5301X: Move CRU devices to the CRU node ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions ARM: dts: BCM5310X: Harmonize xHCI DT nodes name ... Link: https://lore.kernel.org/r/20201128163410.1691529-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
915a391915 |
Our usual bunch of patches to support the Allwinner SoCs, this time
adding: - Some nice pinephone additions - I2S support for the A64, H3, H5 and H6 - New boards: Elimo Impetus, Elimo Initium, FriendlyArm ZeroPi, NanoPi R1 -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX8I0KAAKCRDj7w1vZxhR xS3/AQDlamXDfa+nsu9C/ZKbeHkN82m/iqRgSK9WonJHgddCiAEAuuvwBytJVhAg E4qZ8vQjuKa2tisQv5b2hPZy/VCEUQk= =O2Xu -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to support the Allwinner SoCs, this time adding: - Some nice pinephone additions - I2S support for the A64, H3, H5 and H6 - New boards: Elimo Impetus, Elimo Initium, FriendlyArm ZeroPi, NanoPi R1 * tag 'sunxi-dt-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add gpio-line-names ARM: dts: sun8i: h3: Add initial NanoPi R1 support arm64: dts: allwinner: pinephone: Use generic sensor node names ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC dt-bindings: arm: sunxi: add Elimo bindings ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM arm64: dts: allwinner: pinephone: Add Bluetooth support arm64: dts: allwinner: pinephone: Add WiFi support arm64: dts: allwinner: pinephone: Add light/proximity sensor arm64: dts: allwinner: pinephone: Add LED flash arm64: dts: allwinner: pinephone: Set ALDO3 to exactly 3v0 arm64: dts: allwinner: pinephone: Remove AC power supply arm: dts: sunxi: h3/h5: Add I2S2 node arm64: dts: allwinner: a64: Add I2S2 node arm64: dts: allwinner: h6: Add I2S1 node arm64: dts: allwinner: h6: PineH64 model B: Add wifi ARM: dts: sun8i-v3s: Add I2C1 PB pins description ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi dt-bindings: vendors: add Elimo Engineering vendor prefix ARM: dts: sun8i: add FriendlyArm ZeroPi support ... Link: https://lore.kernel.org/r/551fdf4f-8a0b-4a22-ba49-b4f61520a9ab.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
ab8d302c48 |
AT91 DT for 5.11:
- fix USB host pinctrl - fix DT schema warnings -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl/BdnkACgkQ2wIijOdR NOWimg/9E2ArfvOIKUIw9yeQsEO+3z3FZnloUOb4YuDyI1CjKdZQc08uyb0uIyKP u4YY3GdwsN1GL2sFzffMGdl4w/GYQSjZI+4R+8Iw0bZHTccPC79p5j1T54ONoVVB gMlbs1ophGVZOGswfYgzxJS27fZ4g9ml1886dJyILjq4qYYUB4u69bmeNgdBTSnV VTfsZWkBqHpAe14xjF5Wr8FCAh4jYOi5L4/v3iIdQOvSzj8rF3ucvBT8GOT9NsfV gqZKiDHXl6KfUUoXMV158MI8XoWFVeI+I9XmzwSLWVXGhstmyKy72UvkllrjQN/+ V2dhnRNEUvhMYa8UsgCYiDcZf+FOo4wv48psQKWfp51Ukg0be7BMpHPYGL1ZYapv DvLR71XoQ31wiL59WM34jACHl8BsXy3pfBYZHEi8qZwNZ4QuiAYCKGDf0MS7u0oP +ShSnDje1Dv0MSdooXo8qtRFf28kQXWWA0uhJ7jT5OeMqAqw+sGGURMwUetHcHei jfD4AL1xMRnIbb0Ac63B3wcAnD/FX2WkpUZ39ZoEsfNWroelrLy9vGJDXsbXIznt TGNjpHwn1TCN/crnauFgHIQfEmz415Kwx0U6dprC/uwGOGUWYma+22+WV3cD9qF3 XtCutq1TNuN6YvppnyZ8u3HNmZHrFMwlnp4r/ocsuk2GngchIK8= =aETd -----END PGP SIGNATURE----- Merge tag 'at91-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.11: - fix USB host pinctrl - fix DT schema warnings * tag 'at91-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host ARM: dts: at91: sam9x60: add pincontrol for USB Host ARM: dts: at91: at91-sama5d27_som1: fix EEPROM compatible ARM: dts: at91: Fix schema warnings for pwm-leds ARM: dts: at91: smartkiz: Reference led node directly Link: https://lore.kernel.org/r/20201127220403.GA1735041@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Chao Yu
|
96dd025195 |
f2fs: fix to account inline xattr correctly during recovery
During recovery, we may missed to update inline xattr count correctly, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Jack Qiu
|
8492156153 |
f2fs: inline: fix wrong inline inode stat
Miss to stat inline inode in f2fs_recover_inline_data. Signed-off-by: Jack Qiu <jack.qiu@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Jack Qiu
|
6e5ca4fce7 |
f2fs: inline: correct comment in f2fs_recover_inline_data
In 3rd scene, it should remove data blocks instead of inline_data. Signed-off-by: Jack Qiu <jack.qiu@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Yangtao Li
|
d540e35d4e |
f2fs: don't check PAGE_SIZE again in sanity_check_raw_super()
Many flash devices read and write a single IO based on a multiple of 4KB, and we support only 4KB page cache size now. Since we already check page size in init_f2fs_fs(), so remove page size check in sanity_check_raw_super(). Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Shaohua Liu <liush@allwinnertech.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Yangtao Li
|
b9ec10948f |
f2fs: convert to F2FS_*_INO macro
Use F2FS_ROOT_INO, F2FS_NODE_INO and F2FS_META_INO macro for better code readability. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Shaohua Liu <liush@allwinnertech.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Heiner Kallweit
|
b577562ccc |
PCI: Remove unused HAVE_PCI_SET_MWI
Remove unused HAVE_PCI_SET_MWI. Link: https://lore.kernel.org/r/03f20cac-708d-7897-c7c7-cb4e63cfd991@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Al Viro
|
6220e48d96 |
[regression fix] really dumb fuckup in sparc64 __csum_partial_copy() changes
~0U is -1, not 1
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Fixes:
|
||
Jonathan Cameron
|
9c8421e298 |
dt-bindings:i2c:i2c-gate: txt to yaml conversion
This file provides very little in the way of actual schema but does provide a convenient intro to what an i2c-gate node actually represents. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Peter Rosin <peda@axentia.se> Cc: Wolfram Sang <wsa@the-dreams.de> Link: https://lore.kernel.org/r/20201031181801.742585-2-jic23@kernel.org Link: https://lore.kernel.org/r/20201128173343.390165-2-jic23@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
Andrey Zhizhikin
|
acf689134a |
powerpc/configs: drop unused BACKLIGHT_GENERIC option
Commit |
||
|
Andrey Zhizhikin
|
58d91ac9da |
parisc: configs: drop unused BACKLIGHT_GENERIC option
Commit |
||
Pablo Neira Ayuso
|
42f1c27120 |
netfilter: nftables: comment indirect serialization of commit_mutex with rtnl_mutex
Add an explicit comment in the code to describe the indirect
serialization of the holders of the commit_mutex with the rtnl_mutex.
Commit
|
||
|
Linus Torvalds
|
7d8761ba27 |
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull seq_file fix from Al Viro: "This fixes a regression introduced in this cycle wrt iov_iter based variant for reading a seq_file" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix return values of seq_read_iter() |
||
Niklas Söderlund
|
e854da4f51 |
thermal: rcar_gen3_thermal: Add r8a779a0 support
Add support for R-Car V3U. The new THCODE values are taken from the example in the datasheet. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201126223028.3119044-4-niklas.soderlund+renesas@ragnatech.se |
||
|
Niklas Söderlund
|
d7fdfb6541 |
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support
Add support for R-Car V3U. The V3U IP differs a bit from its siblings in such way that it have 4 TSC nodes and the interrupts are not routed to the INTC-AP but to the ECM. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201126223028.3119044-2-niklas.soderlund+renesas@ragnatech.se |
||
Jakub Kicinski
|
c22c0d55d5 |
Merge branch 'net-hns3-updates-for-next'
Huazhong Tan says: ==================== net: hns3: updates for -next There are some updates for the HNS3 ethernet driver. promiscuous configuration more flexible, #2 adds ethtool private flags to control whether enable tx unicast promisc. previous version: https://patchwork.kernel.org/project/netdevbpf/cover/1606997936-22166-1-git-send-email-tanhuazhong@huawei.com/ ==================== Link: https://lore.kernel.org/r/1607227575-56689-1-git-send-email-tanhuazhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Guojia Liao
|
592b0179cd |
net: hns3: refine the VLAN tag handle for port based VLAN
For DEVICE_VERSION_V2, the hardware only supports max two layer VLAN tags, including port based tag inserted by hardware, tag in tx buffer descriptor(get from skb->tci) and tag in packet. For transmit packet: If port based VLAN disabled, and vf driver gets a VLAN tag from skb, the VLAN tag must be filled to the Outer_VLAN_TAG field (tag near to DMAC) of tx buffer descriptor, otherwise it may be inserted after the tag in packet. If port based VLAN enabled, and vf driver gets a VLAN tag from skb, the VLAN tag must be filled to the VLAN_TAG field (tag far to DMAC) of tx buffer descriptor, otherwise it may be conflicted with port based VLAN, and raise a hardware error. For receive packet: The hardware will strip the VLAN tags and fill them in the rx buffer descriptor, no matter port based VLAN enable or not. Because port based VLAN tag is useless for stack, so vf driver needs to discard the port based VLAN tag get from rx buffer descriptor when port based VLAN enabled. So vf must know about the port based VLAN state. For DEVICE_VERSION_V3, the hardware provides some new configuration to improve it. For transmit packet: When enable tag shift mode, hardware will handle the VLAN tag in outer_VLAN_TAG field as VLAN_TAG, so it won't conflict with port based VLAN. And hardware also make sure the tag before the tag in packet. So vf driver doesn't need to specify the tag position according to the port based VLAN state anymore. For receive packet: When enable discard mode, hardware will strip and discard the port based VLAN tag, so vf driver doesn't need to identify it from rx buffer descriptor. So modify the port based VLAN configuration, simplify the process for vf handling the VLAN tag. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |