This reverts commit 5037d4ddda.
Explanation why this does not work:
This change connects the simswap to the LED subsystem of the kernel.
From my point of view, it's nonsense. If we do it this way, then this
can be switched relatively easily via the LED subsystem (trigger:
none/default-on) and that is dangerous! If this is used, it would be
unfavorable, since there is also another trigger (trigger:
heartbeat/netdev).
Therefore, this simswap GPIO should remain in the GPIO
subsystem and be switched via it and not be connected to the LED
subsystem. To avoid the problems mentioned above. The LED subsystem is
not made for this and it is not a good compromise, but rather dangerous.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The battery on my laptop ASUS TUF Gaming FX706II is named BAT1.
This patch allows battery extension to load.
Signed-off-by: Vasiliy Kupriakov <rublag-ns@yandex.ru>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Added new PCI device ids for supporting mailbox and MMIO interface for
Sapphire Rapids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Extend FAN platform data with register presence field.
Add register present entry per rotor (tachometer) description tuple.
The purpose is to allow indication of FAN presence.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add new field 'reg_prsnt' to the structure 'mlxreg_core_data' to
provide the number FAN drawers equpped within the system. The purpose
is to allow mapping between FAN drawers and FAN rotors (tachometer),
since FAN drawer can be eqipped with a few rotors.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add documentation for the new attributes for exposing CPLDs part
numbers and CPLD minor versions.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add support for attributes composed from few registers.
Such attributes could occupy from 2 to 4 sequential registers.
For word size register space complex attributes can occupy up to two
registers, for byte size - up to four. These attributes can carry, for
example, CPLD or FPGA versioning, power consuming info, etcetera.
Such registers contain read-only data.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add new attributes for the all type systems specifying for each
equipped CPLD device, the CPLD part number and the CPLD minor version
of the device: 'cpld{n}_pn' and 'cpld{n}_version_min'.
This information is to be used for mathcing the current CPLD image and
for making decision if image upgrade is required for CPLD device.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add new field 'regnum' to the structure 'mlxreg_core_data' to specify
the number of registers occupied by multi-register attribute.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Send "udev" event with environmental data in order to allow handling
"ENV{}" variables in "udev" rules.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Create the 'sysfs' attributes according to configuration provided
through the capability register, which purpose is to indicate the
actual number of the components within the particular group.
Such components could be, for example the FAN or power supply units.
The motivation is to avoid adding a new code in the future in order to
distinct between the systems types supporting a different number of the
components like power supplies, FANs, ASICs, line cards.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add few of simple tests for string_upper() and string_lower() helpers.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Provide the helpers for string conversions to upper and lower cases.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When _BCL invalid, disable thinkpad_acpi backlight brightness control.
brightness_enable is already checked at the beginning.
Most new thinkpads are using GPU driver to control brightness now,
print notice when enabled brightness control even when brightness_enable = 1.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Newer Lenovo Thinkpad platforms have support to identify whether the
system is on-lap or not using an ACPI DYTC event from the firmware.
This patch provides the ability to retrieve the current mode via sysfs
entrypoints and will be used by userspace for thermal mode and WWAN
functionality
Co-developed-by: Nitin Joshi <njoshi1@lenovo.com>
Signed-off-by: Nitin Joshi <njoshi1@lenovo.com>
Reviewed-by: Sugumaran <slacshiminar@lenovo.com>
Reviewed-by: Bastien Nocera <bnocera@redhat.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This reverts commit 35d13c7a05.
This broke procfs interface due to neglecting the fact that
the strings are not coming NULL terminated.
Revert the change till we will have a better clean up.
Fixes: 35d13c7a05 ("platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This reverts commit 35d13c7a05.
This broke procfs interface due to neglecting the fact that
the strings are not coming NULL terminated.
Revert the change till we will have a better clean up.
Fixes: 35d13c7a05 ("platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We need to ensure that the kernel context is using the permanently pinned
HWSP so that we can always submit a pm request from any context. By
construction, the engine->kernel_context should only be using the
engine->status_page.vma so let's assert that is still true when we have
to submit a request for parking the engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714114419.28713-1-chris@chris-wilson.co.uk
Add a set of logic with corresponding coexistence parameters to
handle the situation under BT inquiry/page.
We will set PSTDMA while WL-Busy + BT inquiry/page to separate
WL/BT slots. PSTDMA can protect WL data rate and BT performance.
If WL-Busy + BT inquiry/page and there was BT device paired,
We will set the mechanism to 4Slot PSTDMA.
In 4Slot PSTDMA, the paired devices can perform more smoothly
and prevent some issues trigger from insufficient data.
And to avoid A2DP glitch or disconnection, we will adjust ACL
data priority higher than inquiry/page.
In addition, we found sometimes BT inquiry/page still working
last for seconds after BT had notified inquiry/page finished.
It will lead to A2DP glitch cause of ACL data, inquiry/page
priority toggled. To fix the corner, we add a timer to remain
the inquiry/page status.
And we found WL busy/idle threshold is too sensitive,
it will keep switching in some weak network environment and
coexistence mechanism will switch between TDMA and PSTDMA.
The very frequently switching may destroyed not only the
handshake with AP, but BT performance. And it will trigger
some unexpected error.
To prevent the frequently switching, we add a timer to delay
the status change while WL busy switch to idle.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200715023324.8600-1-yhchuang@realtek.com
The length of the key comes from the network and it's a 16 bit number. It
needs to be capped to prevent a buffer overflow.
Fixes: 5e6e3a92b9 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200708115857.GA13729@mwanda
ENOTSUPP (double PP) is internal linux kernel code 524 available only in
kernel include file linux/errno.h and not exported to userspace.
EOPNOTSUPP (OP; double PP) is standard code 95 for reporting 'operation not
supported' available via kernel include file uapi/asm-generic/errno.h.
ENOTSUP (single P) is alias for EOPNOTSUPP defined only in userspace
include file bits/errno.h and not available in kernel.
Because Linux kernel does not support ENOTSUP (single P) and because
userspace does not support ENOTSUPP (double PP), report error code for
'operation not supported' via EOPNOTSUPP macro.
This patch fixes problem that mwifiex kernel driver sends to userspace
unsupported error codes like: "failed: -524 (No error information)".
After applying this patch userspace see: "failed: -95 (Not supported)".
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200703112151.18917-1-pali@kernel.org
We currently have a collection of flags and locking between the
threaded irq and tx work:
- wl->flags bitops
- wl->mutex
- wl->wl_lock spinlock
The bitops flags do not need a spinlock around them, and we only need
the spinlock to see if we need to queue tx work or not. And wlcore_irq()
holds the mutex.
To simplify the locking, we can use spin_trylock and always queue tx
work unless we know there's nothing to do.
Let's also update the comment a bit while at it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200702162951.45392-4-tony@atomide.com
We currently have a collection of flags and locking between the
threaded irq and tx work:
- wl->flags bitops
- wl->mutex
- wl->wl_lock spinlock
The bitops flags do not need a spinlock around them, and
wlcore_irq() already holds the mutex calling wlcore_irq_locked().
And we only need the spinlock to see if we need to run the queue
or not.
To simplify the locking, we can use spin_trylock and always run the
tx queue unless we know there's nothing to do.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200702162951.45392-3-tony@atomide.com
We can simplify the runtime resume ELP path by always setting and
clearing the completion in runtime resume. This way we can test for
WL1271_FLAG_IRQ_RUNNING after the resume write to see if we need
completion at all.
And in wlcore_irq(), we need to take spinlock for running the
completion and for the pm_wakeup_event(). Spinlock is not needed
around the bitops flags check for WL1271_FLAG_SUSPENDED so the
spinlocked sections get shorter.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200702162951.45392-2-tony@atomide.com
This macro is already used in mwifiex driver for specifying upper limit and
is defined to value 3. So use it also in struct ieee80211_iface_limit.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200626152938.12737-1-pali@kernel.org
New device ID 0xc82f found on Lenovo ThinkCenter.
Tested it with c822 driver, works good.
PCI id:
03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd.
Device [10ec:c82f]
Subsystem: Lenovo Device [17aa:c02f]
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200612082745.204400-1-aaron.ma@canonical.com
Some platforms cannot read the DBI register successfully for the
ASPM settings. After the read failed, the bus could be unstable,
and the device just became unavailable [1]. For those platforms,
the ASPM should be disabled. But as the ASPM can help the driver
to save the power consumption in power save mode, the ASPM is still
needed. So, add a module parameter for them to disable it, then
the device can still work, while others can benefit from the less
power consumption that brings by ASPM enabled.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=206411
[2] Note that my lenovo T430 is the same.
Fixes: 3dff7c6e37 ("rtw88: allows to enable/disable HCI link PS mechanism")
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200605074703.32726-1-yhchuang@realtek.com
Since single rf path chips don't support TX SPBC, tell mac80211
to not advertise it.
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200603094218.19942-5-yhchuang@realtek.com
Beamforming is used for directional signal transmission/reception.
Beamformee plays the role for signal reception, and makes the RX
performance better in middle distance range.
Implement beamformee related callbacks for 8821c.
Since 8821c only support 1ss rate, nc_index in beamformee setting
needs to be adjusted based on the capability.
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200603094218.19942-4-yhchuang@realtek.com
The TX power requires to be adjusted based on the thermal value.
The actual power will decrease if the thermal value raised, and
will increase if the thermal value lowered. Driver comapres the
thermal value, as moving averages. If it changes over a limit,
driver will modify the TX power index to compensate.
Implement rtw_chip_ops::pwr_track() for 8821c.
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200603094218.19942-3-yhchuang@realtek.com
CCK PD can reduce the number of false alarm of the CCK rates.
It dynamically adjusts the power threshold and CS ratio.
The values are compared to the values of the previous level, if
the level is changed, set new values of power threshold and CS
ratio.
Implement rtw_chip_ops::cck_pd_set() for 8821c.
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200603094218.19942-2-yhchuang@realtek.com
The VBUS for USB3 connector on the Jetson TX2 is connected to the
vdd_usb1 supply and although this is populated for the USB2 port
on the USB3 connector it is not populated for the USB3 port and
causes the following warning to be seen on boot ...
usb3-0: supply vbus not found, using dummy regulator
Fix this by also adding the VBUS supply to the USB3 port.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the DFLL node and corresponding PWM pin nodes in order to
enable CPUFREQ support on the Jetson Nano platform.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the device-tree source files for the Tegra194 Jetson Xavier NX
Developer Kit. The Xavier NX Developer Kit consists of a small form
factor system-on-module (SOM) board (part number p3668-0000) and a
carrier board (part number p3509-0000).
The Xavier NX Developer Kit SOM features a micro-SD card slot, however,
there is also a variant of the SOM available that features a 16GB eMMC.
Given that the carrier board can be used with the different SOM
variants, that have different part numbers, both the compatible string
and file name of the device-tree source file for the Developer Kit is a
concatenation of the SOM and carrier board part numbers.
Based on some initial work by Thierry Reding <treding@nvidia.com>.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Re-order Tegra194's PCIe aperture mappings to have IO window moved to
64-bit aperture and have the entire 32-bit aperture used for accessing
the configuration space. This makes it to use the entire 32MB of the 32-bit
aperture for ECAM purpose while booting through ACPI.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch enables VI and CSI in device tree for Jetson Nano.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jetson TX1 development board has a camera expansion connector which
has 2V8, 1V8 and 1V2 supplies to power up the camera sensor on the
supported camera modules.
Camera module designed as per Jetson TX1 camera expansion connector
may use these supplies for camera sensor avdd 2V8, digital core 1V8,
and digital interface 1V2 voltages.
These supplies are from fixed regulators on TX1 carrier board with
enable control signals from I2C GPIO expanders.
This patch adds these camera supplies to Jetson TX1 device tree to
allow using these when a camera module is used.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is purely to make the json-schema validation tools happy because
they cannot deal with string arrays that may be in arbitrary order.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The control backbone is a simple-bus and hence its device tree node
should be named "bus@<unit-address>" according to the bindings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
