Prepare for using bpf_prog_array to store attached programs by moving out
code that updates the attached program out of flow dissector.
Managing bpf_prog_array is more involved than updating a single bpf_prog
pointer. This will let us do it all from one place, bpf/net_namespace.c, in
the subsequent patch.
No functional change intended.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200625141357.910330-2-jakub@cloudflare.com
Often we seem to detect an underrun right after modeset on gen2.
It seems to be a spurious detection (potentially the pipe is still
in a wonky state when we enable the planes). An extra vblank wait
seems to cure it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-13-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The default fbc1 compression interval we use is 500 frames. That
translates to over 8 seconds typically. That's rather excessive
so let's drop it to 1 second.
The hardware will not attempt recompression unless at least one
line has been modified, so a shorter compression interval should
not cause extra bandwidth use in the purely idle scenario. Of
course in the mostly idle case we are possibly going to recompress
a bit more.
Should really try to find some kind of sweet spot to minimize
the energy usage...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The hardware host tracking won't nuke the entire cfb (unless the
entire fb is written through the gtt) so don't clear the busy_bits
for gtt tracking.
Not that it really matters anymore since we've lost ORIGIN_GTT usage
everywhere.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The current fence_y_offset calculation is broken. I think it more or
less used to do the right thing, but then I changed the plane code
to put the final x/y source offsets back into the src rectangle so
now it's just subtraacting the same value from itself. The code would
never have worked if we allowed the framebuffer to have a non-zero
offset.
Let's do this in a better way by just calculating the fence_y_offset
from the final plane surface offset. Note that we don't align the
plane surface address to fence rows so with horizontal panning there's
often a horizontal offset from the fence start to the surface address
as well. We have no way to tell the hardware about that so we just
ignore it. Based on some quick tests the invlidation still happens
correctly. I presume due to the invalidation nuking at least the full
line (or a segment of multiple lines).
Fixes: 54d4d719fa ("drm/i915: Overcome display engine stride limits via GTT remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tiger Lake's new unique ACPI device ID for Fan is not valid
because of missing 'C' in the ID. Use correct fan device ID.
Fixes: c248dfe7e0 ("ACPI: fan: Add Tiger Lake ACPI device ID")
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Cc: 5.6+ <stable@vger.kernel.org> # 5.6+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Keep the IPVS hooks registered in Netfilter only
while there are configured virtual services. This
saves CPU cycles while IPVS is loaded but not used.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pcie_speeds() and restore_pci_variables() returns PCIBIOS_ error codes
from PCIe capability accessors.
PCIBIOS_ error codes have positive values. Passing on these values is
inconsistent with functions which return only a negative value on failure.
Before passing on the return value of PCIe capability accessors, call
pcibios_err_to_errno() to convert any positive PCIBIOS_ error codes to
negative generic error values.
Link: https://lore.kernel.org/r/20200615073225.24061-3-refactormyself@gmail.com
Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In nft_pipapo_insert(), we need to reallocate scratch maps that will
be used for matching by lookup functions, if they have never been
allocated or if the bucket size changes as a result of the insertion.
As pipapo_realloc_scratch() provides a pair of fresh, zeroed out
maps, there's no need to select a particular one after reallocation.
Other than being useless, the existing assignment was also troubled
by the fact that the index was set only on the CPU performing the
actual insertion, as spotted by Florian.
Simply drop the assignment.
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
REJECT statement can be only used in INPUT, FORWARD and OUTPUT
chains. This patch adds support of REJECT, both icmp and tcp
reset, at PREROUTING stage.
The need for this patch comes from the requirement of some
forwarding devices to reject traffic before the natting and
routing decisions.
The main use case is to be able to send a graceful termination
to legitimate clients that, under any circumstances, the NATed
endpoints are not available. This option allows clients to
decide either to perform a reconnection or manage the error in
their side, instead of just dropping the connection and let
them die due to timeout.
It is supported ipv4, ipv6 and inet families for nft
infrastructure.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The SoundWire 1.2 specification adds new registers to allow for
seamless clock changes while audio transfers are on-going. Program
them following the specification.
Note that dynamic clock changes are not supported for now, this only
adds the register initialization.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608205436.2402-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SoundWire 1.2 specification adds new capabilities that were not
present in previous version, such as the class ID.
To enable support for class drivers, and well as drivers that address
a specific version, all fields of the sdw_device_id structure need to
be exposed. For SoundWire 1.0 and 1.1 devices, a wildcard is used so
class and version information are ignored.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608205436.2402-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Using 'syscon' alone should be avoided as compatible strings should be
specific enough to identify the exact set of registers contained. Update
the schema to ensure at least 2 compatible strings are present.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
There is a fancy bug, where exiting user task may not have ->mm,
that makes task_works to try to do kthread_use_mm(ctx->sqo_mm).
Don't do that if sqo_mm is NULL.
[ 290.460558] WARNING: CPU: 6 PID: 150933 at kernel/kthread.c:1238
kthread_use_mm+0xf3/0x110
[ 290.460579] CPU: 6 PID: 150933 Comm: read-write2 Tainted: G
I E 5.8.0-rc2-00066-g9b21720607cf #531
[ 290.460580] RIP: 0010:kthread_use_mm+0xf3/0x110
...
[ 290.460584] Call Trace:
[ 290.460584] __io_sq_thread_acquire_mm.isra.0.part.0+0x25/0x30
[ 290.460584] __io_req_task_submit+0x64/0x80
[ 290.460584] io_req_task_submit+0x15/0x20
[ 290.460585] task_work_run+0x67/0xa0
[ 290.460585] do_exit+0x35d/0xb70
[ 290.460585] do_group_exit+0x43/0xa0
[ 290.460585] get_signal+0x140/0x900
[ 290.460586] do_signal+0x37/0x780
[ 290.460586] __prepare_exit_to_usermode+0x126/0x1c0
[ 290.460586] __syscall_return_slowpath+0x3b/0x1c0
[ 290.460587] do_syscall_64+0x5f/0xa0
[ 290.460587] entry_SYSCALL_64_after_hwframe+0x44/0xa9
following with faults.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
gcc 9.2.0 compiles io_req_find_next() as a separate function leaving
the first REQ_F_LINK_HEAD fast check not inlined. Help it by splitting
out the check from the function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Greatly simplify io_async_task_func() removing duplicated functionality
of __io_req_task_submit(). This do one extra spin lock/unlock for
cancelled poll case, but that shouldn't happen often.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_poll_task_func() hand-coded link submission forgetting to set
TASK_RUNNING, acquire mm, etc. Call existing helper for that,
i.e. __io_req_task_submit().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Actually, io_iopoll_queue() may have NULL ->mm, that's if SQ thread
didn't grabbed mm before doing iopoll. Don't fail reqs there, as after
recent changes it won't be punted directly but rather through task_work.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Adjust the reg property to fix the following warning seen with
'make dt_binding_check':
Documentation/devicetree/bindings/thermal/ti,am654-thermal.example.dt.yaml: example-0: thermal@42050000:reg:0: [0, 1107623936, 0, 604] is too long
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630122527.28640-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Remove the soc unit address to fix the following warnings seen with
'make dt_binding_check':
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/thermal/thermal-zones.example.dts:23.20-50.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630121804.27887-1-festevam@gmail.com
[robh: also fix thermal-zones.yaml example]
Signed-off-by: Rob Herring <robh@kernel.org>
Avoid jumping through hoops to silence unused variable warnings, and
also fix sparse rightfully complaining about the locking context:
fs/io_uring.c:1593:39: warning: context imbalance in 'io_kill_linked_timeout' - unexpected unlock
Provide the functional helper as __io_kill_linked_timeout(), and have
separate the locking from it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the sysreg unit name to fix the following warning seen with
'make dt_binding_check':
Warning (unit_address_vs_reg): /example-0/sysreg: node has a reg or ranges property, but no unit name
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200629215500.18037-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Remove the leading zeroes to fix the following warning seen with
'make dt_binding_check':
Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dts:37.33-42.23: Warning (unit_address_format): /example-0/usb-vhub@1e6a0000/vhub-strings/string@0409: unit name should not have leading 0s
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200629214027.16768-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
There are two processed schema files:
- processed-schema-examples.yaml
Used for 'make dt_binding_check'. This is always a full schema.
- processed-schema.yaml
Used for 'make dtbs_check'. This may be a full schema, or a smaller
subset if DT_SCHEMA_FILES is given by a user.
If DT_SCHEMA_FILES is not specified, they are the same. You can copy
the former to the latter instead of running dt-mk-schema twice. This
saves the cpu time a lot when you do 'make dt_binding_check dtbs_check'
because building the full schema takes a couple of seconds.
If DT_SCHEMA_FILES is specified, processed-schema.yaml is generated
based on the specified yaml files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-4-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Currently, processed-schema.yaml is always built, but it is actually
used only for 'make dtbs_check'.
'make dt_binding_check' uses processed-schema-example.yaml instead.
Build processed-schema.yaml only for 'make dtbs_check'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-3-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
We are having more and more schema files.
Commit 8b6b80218b ("dt-bindings: Fix command line length limit
calling dt-mk-schema") fixed the 'Argument list too long' error of
the schema checks, but the same error happens while cleaning too.
'make clean' after 'make dt_binding_check' fails as follows:
$ make dt_binding_check
[ snip ]
$ make clean
make[2]: execvp: /bin/sh: Argument list too long
make[2]: *** [scripts/Makefile.clean:52: __clean] Error 127
make[1]: *** [scripts/Makefile.clean:66: Documentation/devicetree/bindings] Error 2
make: *** [Makefile:1763: _clean_Documentation] Error 2
'make dt_binding_check' generates so many .example.dts, .dt.yaml files,
which are passed to the 'rm' command when you run 'make clean'.
I added a small hack to use the 'find' command to clean up most of the
build artifacts before they are processed by scripts/Makefile.clean
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-2-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Since commit e69f5dc623 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.
'make dt_binding_check' emits the following warning:
uart@5,00200000: $nodename:0: 'uart@5,00200000' does not match '^serial(@[0-9a-f,]+)*$'
Rename the node to follow the pattern defined in
Documentation/devicetree/bindings/serial/serial.yaml
While I was here, I removed leading zeros from unit names.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20200623113242.779241-1-yamada.masahiro@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Sync with upstream dtc primarily to pickup the I2C bus check fixes. The
interrupt_provider check is noisy, so turn it off for now.
This adds the following commits from upstream:
9d7888cbf19c dtc: Consider one-character strings as strings
8259d59f59de checks: Improve i2c reg property checking
fdabcf2980a4 checks: Remove warning for I2C_OWN_SLAVE_ADDRESS
2478b1652c8d libfdt: add extern "C" for C++
f68bfc2668b2 libfdt: trivial typo fix
7be250b4d059 libfdt: Correct condition for reordering blocks
81e0919a3e21 checks: Add interrupt provider test
85e5d839847a Makefile: when building libfdt only, do not add unneeded deps
b28464a550c5 Fix some potential unaligned accesses in dtc
Signed-off-by: Rob Herring <robh@kernel.org>
Currently io_steal_work() is disabled, and every linked request should
go through task_work for initialisation. Do io_req_work_grab_env()
just before io-wq punting and for the whole link, so any request
reachable by io_steal_work() is prepared.
This is also interesting for another reason -- it localises
io_req_work_grab_env() into one place just before io-wq punting, helping
to to better manage req->work lifetime and add some neat
cleanup/optimisations later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove io_req_work_grab_env() call from io_req_defer_prep(), just call
it when neccessary.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Place io_req_init_async() in io_req_work_grab_env() so it won't be
forgotten.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove struct io_op_def *def parameter from io_req_work_grab_env(),
it's trivially deducible from req->opcode and fast. The API is
cleaner this way, and also helps the complier to understand
that it's a real constant and could be register-cached.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After __io_free_req() puts a ctx ref, it should be assumed that the ctx
may already be gone. However, it can be accessed when putting the
fallback req. Free the req first and then put the ctx.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are too many useless flags, kill REQ_F_TIMEOUT_NOSEQ, which can be
easily infered from req.timeout itself.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Generally, it's better to return a value directly than having out
parameter. It's cleaner and saves from some kinds of ugly bugs.
May also be faster.
Return next request from io_req_find_next() and friends directly
instead of passing out parameter.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linked timeout cancellation code is repeated in in io_req_link_next()
and io_fail_links(), and they differ in details even though shouldn't.
Basing on the fact that there is maximum one armed linked timeout in
a link, and it immediately follows the head, extract a function that
will check for it and defuse.
Justification:
- DRY and cleaner
- better inlining for io_req_link_next() (just 1 call site now)
- isolates linked_timeouts from common path
- reduces time under spinlock for failed links
- actually less code
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: fold in locking fix for io_fail_links()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
EC is using 32 bit timestamps (us), and before converting it to 64bit
they were not casted, so it would overflow every 4s.
Regular overflow every ~70 minutes was not taken into account either.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Define basic suspend resume functions for cros-ec-typec. On suspend, we
simply ensure that any pending port update work is completed, and on
resume, we re-poll the port state to account for any
changes/disconnections that might have occurred during suspend.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Use a work queue to call the port update routines, instead of doing it
directly in the PD notifier callback. This will prevent other drivers
with PD notifier callbacks from being blocked on the port update routine
completing.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
BPF ringbuf assumes the size to be a multiple of page size and the power of
2 value. The latter is important to avoid division while calculating position
inside the ring buffer and using (N-1) mask instead. This patch fixes omission
to enforce power-of-2 size rule.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200630061500.1804799-1-andriin@fb.com
'struct ioh_gpio_reg_data's 'ien_reg' property is missing a ':'
which confuses the kerneldoc tooling/parsers/validators.
Replacing it squashes the following W=1 warning:
drivers/gpio/gpio-ml-ioh.c:63: warning: Function parameter or member 'ien_reg' not described in 'ioh_gpio_reg_data'
Cc: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The following build error is seen with 'make dt_binding_check':
CHKDT Documentation/devicetree/bindings/mfd/st,stmfx.yaml
/home/fabio/linux-next/Documentation/devicetree/bindings/mfd/st,stmfx.yaml: properties:pinctrl:patternProperties: {'enum': ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'if', 'items', 'maxItems', 'maximum', 'minItems', 'minimum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'propertyNames', 'required', 'then', 'unevaluatedProperties']} is not allowed for 'additionalProperties'
Remove the extra 'additionalProperties' to pass the build.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
