Make use of for_each_requested_gpio() instead of home grown analogue.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Make use of for_each_requested_gpio_in_range() instead of home grown analogue.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Protect IO in intel_gpio_get_direction(), intel_gpio_community_irq_handler(),
intel_config_get_debounce() and intel_config_get_pull() by lock. Even for
simple readl() we better serialize IO to avoid potential problems.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Split intel_config_get() to three functions, i.e. intel_config_get() and
two helpers intel_config_get_pull() and intel_config_get_debounce() to be
symmetrical with intel_config_set*().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Drop the only label in the code, i.e. in intel_config_set_debounce(),
for consistency with the rest. In entire driver we use multipoint
return.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In a code like
if (...) {
...
goto label;
} else {
...
}
the 'else' keyword is redundant. Get rid of it for better readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Instead of using bitwise operations against returned values,
which is a bit fragile, convert IRQ handler to count amount of
GPIO groups, where at least one interrupt happened, and convert
it to returned value by IRQ_RETVAL() macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In some cases lock covers unneeded calls and operations.
Reduce scope of the lock in such cases.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
It's possible scenario that pin has been in different mode, while
the respective GPIO register has a leftover output buffer enabled.
In such case when we request GPIO it will switch to GPIO mode, and
thus to output with unknown value, followed by switching to input
mode. This can produce a glitch on the pin.
Disable input and output buffer when switching to GPIO to avoid
potential glitches.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We have some data structures duplicated across the drivers.
Let's deduplicate them by using struct intel_pinctrl_soc_data,
struct intel_community and struct intel_pinctrl_context that
are being provided by pinctrl-intel.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Individual drivers may install ACPI OpRegion handlers based on
address space ID which differs from community to community.
Add special field in the struct intel_community for that purpose.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Some of the pin control devices may not be capable to generate IRQ
per each pin in the community. Allow individual drivers to define
total amount of IRQs per community.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
chv_writel() is now solely used for cases where we write data
to the PAD registers. In order to simplify callers, calculate
register address inside chv_writel().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Pin control device and effectively the single community in it has
a set of common registers. It's good to have a helpers to IO on them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There are plenty of places where we call
readl(chv_padreg(pctrl, offset, ...));
Replace them with newly introduced chv_readl() helper
chv_readl(pctrl, offset, ...);
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
According to the latest AM65x Data Manual[1], a different output tap
delay value is optimum for a given speed mode. Update these values.
[1] http://www.ti.com/lit/gpn/am6526
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
uart0_pins is defined as:
static const unsigned uart0_pins[] = {135, 136, 137, 138, 139};
which npins is wronly specified as 9 later
{
.name = "uart0",
.pins = uart0_pins,
.npins = 9,
},
npins should be 5 instead of 9 according to the definition.
Signed-off-by: Jacky Hu <hengqing.hu@gmail.com>
Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The CPU on Qualcomm ipq6018 devices are clocked primarily by a aplha PLL
and xo which are connected to a mux and enable block.
Add support for the mux and enable block which feeds the CPU on ipq6018
devices.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592800092-20533-5-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The CPUs on Qualcomm ipq based devices are clocked by an alpha PLL.
Add support for the apss pll found on ipq based devices which can
support CPU frequencies above 1Ghz.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592800092-20533-3-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
cpus on ipq6018 are clocked by a53 pll, add device compatible for a53
pll found on ipq6018 devices.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592800092-20533-2-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
FIX_EARLY_DEBUG_BASE reserves a 128k area for debuging.
When page size is 256k, the calculation results in a 0 number of
pages, leading to the following failure:
CC arch/powerpc/kernel/asm-offsets.s
In file included from ./arch/powerpc/include/asm/nohash/32/pgtable.h:77:0,
from ./arch/powerpc/include/asm/nohash/pgtable.h:8,
from ./arch/powerpc/include/asm/pgtable.h:20,
from ./include/linux/pgtable.h:6,
from ./arch/powerpc/include/asm/kup.h:42,
from ./arch/powerpc/include/asm/uaccess.h:9,
from ./include/linux/uaccess.h:11,
from ./include/linux/crypto.h:21,
from ./include/crypto/hash.h:11,
from ./include/linux/uio.h:10,
from ./include/linux/socket.h:8,
from ./include/linux/compat.h:15,
from arch/powerpc/kernel/asm-offsets.c:14:
./arch/powerpc/include/asm/fixmap.h:75:2: error: overflow in enumeration values
__end_of_permanent_fixed_addresses,
^
make[2]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1
Ensure the debug area is at least one page.
Fixes: b8e8efaa86 ("powerpc: reserve fixmap entries for early debug")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ca8c9f8249f523b1fab873e67b81b11989d46553.1592207216.git.christophe.leroy@csgroup.eu
Extend the alignment handler selftest to exercise prefixed load store
instructions. Add tests for prefixed VSX, floating point and integer
instructions.
Skip prefix tests if ISA version does not support prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fixup PPC_FEATURE2_ARCH_3_1 naming as noted by Alistair]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-2-jniethe5@gmail.com
This reverts commit 8ece3b3eb5.
This commit broke userspace. Bash uses ESPIPE to determine whether or
not the file should be read using "unbuffered I/O", which means reading
1 byte at a time instead of 128 bytes at a time. I used to use bash to
read through kmsg in a really quite nasty way:
while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
echo "SARU $line"
done < /dev/kmsg
This will show all lines that can fit into the 128 byte buffer, and skip
lines that don't. That's pretty awful, but at least it worked.
With this change, bash now tries to do 1-byte reads, which means it
skips all the lines, which is worse than before.
Now, I don't really care very much about this, and I'm already look for
a workaround. But I did just spend an hour trying to figure out why my
scripts were broken. Either way, it makes no difference to me personally
whether this is reverted, but it might be something to consider. If you
declare that "trying to read /dev/kmsg with bash is terminally stupid
anyway," I might be inclined to agree with you. But do note that bash
uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's
reading from a pipe.
Cc: Bruno Meneguele <bmeneg@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
open_shroot() invokes kref_get(), which increases the refcount of the
"tcon->crfid" object. When open_shroot() returns not zero, it means the
open operation failed and close_shroot() will not be called to decrement
the refcount of the "tcon->crfid".
The reference counting issue happens in one normal path of
open_shroot(). When the cached root have been opened successfully in a
concurrent process, the function increases the refcount and jump to
"oshr_free" to return. However the current return value "rc" may not
equal to 0, thus the increased refcount will not be balanced outside the
function, causing a refcnt leak.
Fix this issue by setting the value of "rc" to 0 before jumping to
"oshr_free" label.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
After recent changes, io_submit_sqes() always passes valid submit state,
so kill leftovers checking it for NULL.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's a good practice to modify fields of a struct after but not before
it was initialised. Even though io_init_poll_iocb() doesn't touch
poll->file, call it first.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_F_MUST_PUNT may seem looking good and clear, but it's the same
as not having REQ_F_NOWAIT set. That rather creates more confusion.
Moreover, it doesn't even affect any behaviour (e.g. see the patch
removing it from io_{read,write}).
Kill theg flag and update already outdated comments.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_{read,write}() {
...
copy_iov: // prep async
if (!(flags & REQ_F_NOWAIT) && !file_can_poll(file))
flags |= REQ_F_MUST_PUNT;
}
REQ_F_MUST_PUNT there is pointless, because if it happens then
REQ_F_NOWAIT is known to be _not_ set, and the request will go
async path in __io_queue_sqe() anyway. file_can_poll() check
is also repeated in arm_poll*(), so don't need it.
Remove the mentioned assignment REQ_F_MUST_PUNT in preparation
for killing the flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull in async buffered reads branch.
* async-buffered.8:
io_uring: support true async buffered reads, if file provides it
mm: add kiocb_wait_page_queue_init() helper
btrfs: flag files as supporting buffered async reads
xfs: flag files as supporting buffered async reads
block: flag block devices as supporting IOCB_WAITQ
fs: add FMODE_BUF_RASYNC
mm: support async buffered reads in generic_file_buffered_read()
mm: add support for async page locking
mm: abstract out wake_page_match() from wake_page_function()
mm: allow read-ahead with IOCB_NOWAIT set
io_uring: re-issue block requests that failed because of resources
io_uring: catch -EIO from buffered issue request failure
io_uring: always plug for any number of IOs
block: provide plug based way of signaling forced no-wait semantics
If the file is flagged with FMODE_BUF_RASYNC, then we don't have to punt
the buffered read to an io-wq worker. Instead we can rely on page
unlocking callbacks to support retry based async IO. This is a lot more
efficient than doing async thread offload.
The retry is done similarly to how we handle poll based retry. From
the unlock callback, we simply queue the retry to a task_work based
handler.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Checks if the file supports it, and initializes the values that we need.
Caller passes in 'data' pointer, if any, and the callback function to
be used.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the async page locking infrastructure, if IOCB_WAITQ is set in the
passed in iocb. The caller must expect an -EIOCBQUEUED return value,
which means that IO is started but not done yet. This is similar to how
O_DIRECT signals the same operation. Once the callback is received by
the caller for IO completion, the caller must retry the operation.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normally waiting for a page to become unlocked, or locking the page,
requires waiting for IO to complete. Add support for lock_page_async()
and wait_on_page_locked_async(), which are callback based instead. This
allows a caller to get notified when a page becomes unlocked, rather
than wait for it.
We add a new iocb field, ki_waitq, to pass in the necessary data for this
to happen. We can unionize this with ki_cookie, since that is only used
for polled IO. Polled IO can never co-exist with async callbacks, as it is
(by definition) polled completions. struct wait_page_key is made public,
and we define struct wait_page_async as the interface between the caller
and the core.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, just in preparation for allowing
more callers.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The read-ahead shouldn't block, so allow it to be done even if
IOCB_NOWAIT is set in the kiocb.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark the plug with nowait == true, which will cause requests to avoid
blocking on request allocation. If they do, we catch them and reissue
them from a task_work based handler.
Normally we can catch -EAGAIN directly, but the hard case is for split
requests. As an example, the application issues a 512KB request. The
block core will split this into 128KB if that's the max size for the
device. The first request issues just fine, but we run into -EAGAIN for
some latter splits for the same request. As the bio is split, we don't
get to see the -EAGAIN until one of the actual reads complete, and hence
we cannot handle it inline as part of submission.
This does potentially cause re-reads of parts of the range, as the whole
request is reissued. There's currently no better way to handle this.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-EIO bubbles up like -EAGAIN if we fail to allocate a request at the
lower level. Play it safe and treat it like -EAGAIN in terms of sync
retry, to avoid passing back an errant -EIO.
Catch some of these early for block based file, as non-mq devices
generally do not support NOWAIT. That saves us some overhead by
not first trying, then retrying from async context. We can go straight
to async punt instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we only plug if we're doing more than two request. We're going
to be relying on always having the plug there to pass down information,
so plug unconditionally.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide a way for the caller to specify that IO should be marked
with REQ_NOWAIT to avoid blocking on allocation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ring pages are not pinned so it is more appropriate to report them
as locked.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
