Dumo is another variant of Scarlet, also known as the ASUS Chromebook
Tablet CT100. This is almost the same as Scarlet-Innolux, but uses a
board-specific calibration variant for the WiFi module.
Add a new device tree for it.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210812094753.2359087-3-wenst@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Dumo is another variant of Scarlet, also known as the ASUS Chromebook
Tablet CT100. This is almost the same as Scarlet-Innolux, but uses a
specific calibration variant for the WiFi module.
Add an entry for the board compatibles.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210812094753.2359087-2-wenst@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rk3568 gpll should run at 1200mhz and the ppll should run at 200mhz.
These are set incorrectly by the bootloader, so fix them here.
gpll boots at 1188mhz, but to get most accurate dividers for all
gpll_dividers it needs to run at 1200mhz, otherwise everyone downstream
isn't quite right.
ppll feeds the combophys, which has a divide by 2 clock, so 200mhz is
required to reach a 100mhz clock input for them.
The vendor-kernel also makes this fix.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
[pulled deeper explanation from discussion into commit message]
Link: https://lore.kernel.org/r/20210728180034.717953-7-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the gmac1 controller to the rk356x device tree.
This is the controller common to both the rk3568 and rk3566.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210728180034.717953-5-pgwipeout@gmail.com
[adjusted sorting a bit]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The mbi-alias incorrectly points to 0xfd100000 when it should point to
0xfd410000.
This fixes MSIs on rk3568.
Fixes: a3adc0b907 ("arm64: dts: rockchip: add core dtsi for RK3568 SoC")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210728180034.717953-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The PX30 has a VPU (both decoder and encoder) with a dedicated IOMMU.
Describe these two entities in device-tree.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: https://lore.kernel.org/r/20210728230040.17368-1-ezequiel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ISP1 is supplied by the tx1rx1 dphy, that is controlled from
inside the dsi1 controller, so include the necessary phy-link
for it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20210210111020.2476369-7-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This enables variant a of the clkout signal for camera applications
and also the cifclkin pinctrl setting.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20210210111020.2476369-6-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The dsi controller includes access to the dphy which might be used
not only for dsi output but also for csi input on dsi1, so add the
necessary #phy-cells to allow it to be used as phy.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20210210111020.2476369-5-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a basic dts for the Pine64 Quartz64 Model A Single Board Computer.
This board outputs on uart2 for debug.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210710151034.32857-5-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In preparation for the rk3566 inclusion, split apart the rk3568 specific
nodes into a separate device tree.
This allows us to create the rk3566 device tree without deleting nodes.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210710151034.32857-3-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In preparation for separating the rk3568 and rk3566 device trees, move
the base rk3568 dtsi to rk356x dtsi.
This will allow us to strip out the rk3568 specific nodes.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210710151034.32857-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the CSI dphy node to the core px30 devicetree for later use
with the rkisp.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210722073955.1192168-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a SPDIF audio-graph-card to ROCK Pi 4 device tree.
It's not enabled by default since all dma channels are used by
the (already) enabled i2s0/1/2 and the pin is muxed with GPIO4_C5
which might be in use already.
If enabled SPDIF_TX will be available at pin #15.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210618181256.27992-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ROCK Pi 4 boards have the codec connected to i2s0 and it is accessible
via i2c1 address 0x11.
Add an audio-graph-card for it.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210618181256.27992-5-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ROCK Pi 4B+ board is the successor of ROCK Pi 4B board.
Differences to the original version are
- has RK3399 OP1 SoC revision
- has eMMC (16 or 32 GB) soldered on board (no changes required,
since it is enabled in rk3399-rock-pi-4.dtsi)
- dev boards have SPI flash soldered, but as per manufacturer response,
this won't be the case for mass production boards
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210618181256.27992-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ROCK Pi 4A+ board is the successor of ROCK Pi 4A board.
Differences to the original version are
- has RK3399 OP1 SoC revision
- has eMMC (16 or 32 GB) soldered on board (no changes required,
since it is enabled in rk3399-rock-pi-4.dtsi)
- dev boards have SPI flash soldered, but as per manufacturer response,
this won't be the case for mass production boards
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210618181256.27992-3-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ROCK Pi 4 got 2 more variants called A+ and B+.
Add the dt-bindings documentation for it.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210618181256.27992-2-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The CDN DP needs a PHY and a extcon to work correctly. But no extcon is
provided by the device-tree, which leads to an error:
cdn-dp fec00000.dp: [drm:cdn_dp_probe [rockchipdrm]] *ERROR* missing extcon or phy
cdn-dp: probe of fec00000.dp failed with error -22
Disable the CDN DP to make graphic work on the Pinebook Pro.
Reported-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Link: https://lore.kernel.org/r/20210715164101.11486-1-matthias.bgg@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ROC-RK3399-PC-PLUS is the board inside the portable Firefly Station P1 Geek
PC. As a redesign after the ROC-RK3399-PC, it uses DC-12V as power input
and spares a USB 3 host port. It is also equipped with a USB WiFi chip and
audio codec without the mezzanine board.
- Rockchip RK3399 SoC
- 4GB LPDDR4 RAM
- 16MB SPI-Flash
- eMMC slot
- TF card slot
- USB 3.0 Port x 1, USB 2.0 Port x 1, TypeC Port x 1
- HDMI
- Gigabit Ethernet
- WiFi: RTL8723DU
- Audio: ES8388
- Key: Recovery
- LED: WORK, DIY
- IR
Signed-off-by: Kongxin Deng <dkx@t-chip.com.cn>
Signed-off-by: Levin Du <djw@t-chip.com.cn>
Link: https://lore.kernel.org/r/20210628035402.16812-3-djw@t-chip.com.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ROC-RK3328-PC is the board inside the portable Firefly Station M1
Geek PC. As a redesign after the ROC-RK3328-CC, it uses TypeC as
power input and OTG port, embedded with eMMC 5.1 storage and a
SDIO WiFi/BT chip (RTL8723DS).
- Rockchip RK3328 SoC
- 2/4GB LPDDR3 RAM
- 16/32/64/128GB eMMC 5.1
- TF card slot
- USB 3.0 Port x 1, USB 2.0 Port x 1, TypeC Port x 1 (Power/OTG)
- HDMI
- Gigabit Ethernet
- WiFi: RTL8723DS
- Audio: RK3328
- Key: Power, Reset, Recovery
- LED: POWER, USER
- IR
Signed-off-by: Levin Du <djw@t-chip.com.cn>
Link: https://lore.kernel.org/r/20210709080126.17045-3-djw@t-chip.com.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The ddc-i2c-scl-* properties in the hdmi node are
not in use in the mainline kernel, so remove them.
Reported-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210701144110.12333-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Recently a clock_in_out property was added to the gmac2phy node
in rk3328.dtsi, so now the clock_in_out in rk3318-a95x-z2.dts
can be removed.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210701144110.12333-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Nodes with compatible "jedec,spi-nor" are now checked with
jedec,spi-nor.yaml and mtd.yaml. The pattern is now
"^flash(@.*)?$", so change that for the boards with a
Rockchip SoC.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210711145900.15443-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The iommu driver gets the interrupts by platform_get_irq(),
so remove interrupt-names property from iommu nodes.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210711143430.14347-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Add missing fields and remove some duplicate fields when printing a perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features being
automagically added to 'perf trace' syscall/tracepoint argument id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian consider
its ABI unstable.
- Add support to print a textual representation of IBS raw sample data in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script' python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYT0+hwAKCRCyPKLppCJ+
JxcPAQDO+iCKK/sF3TVN8f0T8xkFD6y8krBXPAtQHCAhVBeiqAD9F4R0VMX6nwy3
8rJnsNd2ODjywgFBO4uPy0N2fxBWjwo=
=/hH1
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Add missing fields and remove some duplicate fields when printing a
perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features
being automagically added to 'perf trace' syscall/tracepoint argument
id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian
consider its ABI unstable.
- Add support to print a textual representation of IBS raw sample data
in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script'
python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
tools headers UAPI: Sync linux/in.h copy with the kernel sources
perf tools: Add an option to build without libbfd
perf tools: Allow build-id with trailing zeros
perf tools: Fix hybrid config terms list corruption
perf tools: Factor out copy_config_terms() and free_config_terms()
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
perf tools: Ignore Documentation dependency file
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
tools include UAPI: Update linux/mount.h copy
perf beauty: Cover more flags in the move_mount syscall argument beautifier
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf report: Add support to print a textual representation of IBS raw sample data
perf report: Add tools/arch/x86/include/asm/amd-ibs.h
perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
...
- Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
original hotplug code and now causing trouble with the ARM64 cache
topology setup due to the pointless SMP function call. It's not longer
required as the hotplug callbacks are guaranteed to be invoked on the
upcoming CPU.
- Remove the deprecated and now unused CPU hotplug functions
- Rewrite the CPU hotplug API documentation
-----BEGIN PGP SIGNATURE-----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=uAYt
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"Updates for the SMP and CPU hotplug:
- Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
original hotplug code and now causing trouble with the ARM64 cache
topology setup due to the pointless SMP function call.
It's not longer required as the hotplug callbacks are guaranteed to
be invoked on the upcoming CPU.
- Remove the deprecated and now unused CPU hotplug functions
- Rewrite the CPU hotplug API documentation"
* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: core-api/cpuhotplug: Rewrite the API section
cpu/hotplug: Remove deprecated CPU-hotplug functions.
thermal: Replace deprecated CPU-hotplug functions.
drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit it
as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
"obviously correct" when reviewing it locally :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYT4IaQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykQjwCgpMt1Tscv4Ek1iIigZTvygsgnBcgAniQH3nC7
iE5oyKRtQ3LolPGkAExd
=oC1V
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fix from Greg KH:
"Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit
it as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
'obviously correct' when reviewing it locally :)"
* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: Use init_uts_ns.name instead of macros
Nothing bug, but probably needs to go in.
-----BEGIN PGP SIGNATURE-----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=BmmZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A couple of very minor fixes for style and rate limiting.
Nothing big, but probably needs to go in"
* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
char: ipmi: use DEVICE_ATTR helper macro
ipmi: rate limit ipmi smi_event failure message
- Make sure the run-queue balance callback is invoked only on the outgoing CPU
-----BEGIN PGP SIGNATURE-----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=ExIs
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the idle timer expires in hardirq context, on PREEMPT_RT
- Make sure the run-queue balance callback is invoked only on the
outgoing CPU
* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Prevent balance_push() on remote runqueues
sched/idle: Make the idle timer expire in hard interrupt context
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock check
- Other smaller cleanups and optimizations
-----BEGIN PGP SIGNATURE-----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=3Eyw
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Fix the futex PI requeue machinery to not return to userspace in
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock
check
- Other smaller cleanups and optimizations
* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix ww_mutex deadlock check
futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
futex: Avoid redundant task lookup
futex: Clarify comment for requeue_pi_wake_futex()
futex: Prevent inconsistent state and exit race
futex: Return error code instead of assigning it without effect
locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
Pull namei updates from Al Viro:
"Clearing fallout from mkdirat in io_uring series. The fix in the
kern_path_locked() patch plus associated cleanups"
* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
putname(): IS_ERR_OR_NULL() is wrong here
namei: Standardize callers of filename_create()
namei: Standardize callers of filename_lookup()
rename __filename_parentat() to filename_parentat()
namei: Fix use after free in kern_path_locked
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmE84CsACgkQiiy9cAdy
T1Gtnwv/ZR300RApOW6lxg5GuDxTVbOW9Iu+d8PGPTv+ai02LPIr3tfh+ClHqJYV
IuOEIDckyWN32WGDaX9agLffYmQgYgan6sVL7LkebJvl5t6CdhPXOXM6Un2H32tM
M0J73IhaIpFdNyNFCTfZ62J99vyUNLUKB2jSnhbpjUZTDoPELXVXAVEbk7bd9Dme
AwKFbxO8cKkDOWk84BPMW4cxRZPT6NrkqsZiNkz++2U8WusL8mZNmLN8VwkMlzXo
nEqhEHWPSXTV7M2lmY1UxyW2n0MEG4djNquZ2YCIunWwigD8iimBnJJnyirCI8YF
3kpWXlfpwhUjQ1EoFAtQK+hexDpkyxB/1Kn0+xfmNpFqKqQ8eIwFQAkMh42VL9Gd
Gi+uAM7mXk/IdWXwIm0B+8faM6FwhI3VXQvhV9dNi5yAXvv2cpsKv4VKugscFhdq
alpQyoWZ8ivam7vADSNKYKYOchARz2xr1pLc+Cw+ggfu01wSEWWpehsUx5vJGMQ7
npxdcZJ6
=Y9tc
-----END PGP SIGNATURE-----
Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smbfs updates from Steve French:
"cifs/smb3 updates:
- DFS reconnect fix
- begin creating common headers for server and client
- rename the cifs_common directory to smbfs_common to be more
consistent ie change use of the name cifs to smb (smb3 or smbfs is
more accurate, as the very old cifs dialect has long been
superseded by smb3 dialects).
In the future we can rename the fs/cifs directory to fs/smbfs.
This does not include the set of multichannel fixes nor the two
deferred close fixes (they are still being reviewed and tested)"
* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: properly invalidate cached root handle when closing it
cifs: move SMB FSCTL definitions to common code
cifs: rename cifs_common to smbfs_common
cifs: update FSCTL definitions
