Commit graph

1,042,680 commits

Author SHA1 Message Date
Daniel Xu
c34c338a40 libbpf: Do not close un-owned FD 0 on errors
Before this patch, btf_new() was liable to close an arbitrary FD 0 if
BTF parsing failed. This was because:

* btf->fd was initialized to 0 through the calloc()
* btf__free() (in the `done` label) closed any FDs >= 0
* btf->fd is left at 0 if parsing fails

This issue was discovered on a system using libbpf v0.3 (without
BTF_KIND_FLOAT support) but with a kernel that had BTF_KIND_FLOAT types
in BTF. Thus, parsing fails.

While this patch technically doesn't fix any issues b/c upstream libbpf
has BTF_KIND_FLOAT support, it'll help prevent issues in the future if
more BTF types are added. It also allow the fix to be backported to
older libbpf's.

Fixes: 3289959b97 ("libbpf: Support BTF loading and raw data output in both endianness")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/5969bb991adedb03c6ae93e051fd2a00d293cf25.1627513670.git.dxu@dxuuu.xyz
2021-08-07 01:39:15 +02:00
Robin Gögge
78d14bda86 libbpf: Fix probe for BPF_PROG_TYPE_CGROUP_SOCKOPT
This patch fixes the probe for BPF_PROG_TYPE_CGROUP_SOCKOPT,
so the probe reports accurate results when used by e.g.
bpftool.

Fixes: 4cdbfb59c4 ("libbpf: support sockopt hooks")
Signed-off-by: Robin Gögge <r.goegge@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210728225825.2357586-1-r.goegge@gmail.com
2021-08-07 01:38:52 +02:00
Grygorii Strashko
35ba6abb73 net: ethernet: ti: davinci_cpdma: revert "drop frame padding"
This reverts commit 9ffc513f95 ("net: ethernet: ti: davinci_cpdma: drop
frame padding") which has depndency from not yet merged patch [1] and so
breaks cpsw_new driver.

[1] https://patchwork.kernel.org/project/netdevbpf/patch/20210805145511.12016-1-grygorii.strashko@ti.com/
Fixes: 9ffc513f95 ("net: ethernet: ti: davinci_cpdma: drop frame padding")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20210806142809.15069-1-grygorii.strashko@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-06 16:18:15 -07:00
Laurent Dufour
c18956e6e0 powerpc/pseries: Fix update of LPAR security flavor after LPM
After LPM, when migrating from a system with security mitigation enabled
to a system with mitigation disabled, the security flavor exposed in
/proc is not correctly set back to 0.

Do not assume the value of the security flavor is set to 0 when entering
init_cpu_char_feature_flags(), so when called after a LPM, the value is
set correctly even if the mitigation are not turned off.

Fixes: 6ce56e1ac3 ("powerpc/pseries: export LPAR security flavor in lparcfg")
Cc: stable@vger.kernel.org # v5.13+
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210805152308.33988-1-ldufour@linux.ibm.com
2021-08-07 08:53:59 +10:00
Christophe Leroy
8241461536 powerpc/smp: Fix OOPS in topology_init()
Running an SMP kernel on an UP platform not prepared for it,
I encountered the following OOPS:

	BUG: Kernel NULL pointer dereference on read at 0x00000034
	Faulting instruction address: 0xc0a04110
	Oops: Kernel access of bad area, sig: 11 [#1]
	BE PAGE_SIZE=4K SMP NR_CPUS=2 CMPCPRO
	Modules linked in:
	CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-pmac-00001-g230fedfaad21 #5234
	NIP:  c0a04110 LR: c0a040d8 CTR: c0a04084
	REGS: e100dda0 TRAP: 0300   Not tainted  (5.13.0-pmac-00001-g230fedfaad21)
	MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 84000284  XER: 00000000
	DAR: 00000034 DSISR: 20000000
	GPR00: c0006bd4 e100de60 c1033320 00000000 00000000 c0942274 00000000 00000000
	GPR08: 00000000 00000000 00000001 00000063 00000007 00000000 c0006f30 00000000
	GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000005
	GPR24: c0c67d74 c0c67f1c c0c60000 c0c67d70 c0c0c558 1efdf000 c0c00020 00000000
	NIP [c0a04110] topology_init+0x8c/0x138
	LR [c0a040d8] topology_init+0x54/0x138
	Call Trace:
	[e100de60] [80808080] 0x80808080 (unreliable)
	[e100de90] [c0006bd4] do_one_initcall+0x48/0x1bc
	[e100def0] [c0a0150c] kernel_init_freeable+0x1c8/0x278
	[e100df20] [c0006f44] kernel_init+0x14/0x10c
	[e100df30] [c00190fc] ret_from_kernel_thread+0x14/0x1c
	Instruction dump:
	7c692e70 7d290194 7c035040 7c7f1b78 5529103a 546706fe 5468103a 39400001
	7c641b78 40800054 80c690b4 7fb9402e <81060034> 7fbeea14 2c080000 7fa3eb78
	---[ end trace b246ffbc6bbbb6fb ]---

Fix it by checking smp_ops before using it, as already done in
several other places in the arch/powerpc/kernel/smp.c

Fixes: 39f8756145 ("powerpc/smp: Move ppc_md.cpu_die() to smp_ops.cpu_offline_self()")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/75287841cbb8740edd44880fe60be66d489160d9.1628097995.git.christophe.leroy@csgroup.eu
2021-08-07 08:53:59 +10:00
Christophe Leroy
b5cfc9cd7b powerpc/32: Fix critical and debug interrupts on BOOKE
32 bits BOOKE have special interrupts for debug and other
critical events.

When handling those interrupts, dedicated registers are saved
in the stack frame in addition to the standard registers, leading
to a shift of the pt_regs struct.

Since commit db297c3b07 ("powerpc/32: Don't save thread.regs on
interrupt entry"), the pt_regs struct is expected to be at the
same place all the time.

Instead of handling a special struct in addition to pt_regs, just
add those special registers to struct pt_regs.

Fixes: db297c3b07 ("powerpc/32: Don't save thread.regs on interrupt entry")
Cc: stable@vger.kernel.org
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/028d5483b4851b01ea4334d0751e7f260419092b.1625637264.git.christophe.leroy@csgroup.eu
2021-08-07 08:53:59 +10:00
Christophe Leroy
6237636504 powerpc/32s: Fix napping restore in data storage interrupt (DSI)
When a DSI (Data Storage Interrupt) is taken while in NAP mode,
r11 doesn't survive the call to power_save_ppc32_restore().

So use r1 instead of r11 as they both contain the virtual stack
pointer at that point.

Fixes: 4c0104a83f ("powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/731694e0885271f6ee9ffc179eb4bcee78313682.1628003562.git.christophe.leroy@csgroup.eu
2021-08-07 08:53:59 +10:00
Vincent Fu
fb7b9b0231 kyber: make trace_block_rq call consistent with documentation
The kyber ioscheduler calls trace_block_rq_insert() *after* the request
is added to the queue but the documentation for trace_block_rq_insert()
says that the call should be made *before* the request is added to the
queue.  Move the tracepoint for the kyber ioscheduler so that it is
consistent with the documentation.

Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Link: https://lore.kernel.org/r/20210804194913.10497-1-vincent.fu@samsung.com
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-06 16:40:47 -06:00
Dan Carpenter
06669e6880 vrf: fix NULL dereference in vrf_finish_output()
The "skb" pointer is NULL on this error path so we can't dereference it.
Use "dev" instead.

Fixes: 14ee70ca89 ("vrf: use skb_expand_head in vrf_finish_output")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210806150435.GB15586@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-06 15:40:37 -07:00
Matthias Schiffer
6ea0126631 power: supply: sbs-battery: add support for time_to_empty_now attribute
As defined by the Smart Battery Data Specification.

An _AVG suffix is added to the enum values REG_TIME_TO_EMPTY and
REG_TIME_TO_FULL to make the distinction clear.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-06 23:48:51 +02:00
Matthias Schiffer
e11544d0cd power: supply: sbs-battery: relax voltage limit
The Smart Battery Data Specification allows for values 0..65535 mV,
there is no reason to limit the value to 20000.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-06 23:48:51 +02:00
Tang Bin
391719dce5 power: supply: qcom_smbb: Remove superfluous error message
In the probe function, when get irq failed, the function
platform_get_irq_byname() logs an error message, so remove
redundant message here.

Co-developed-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-06 23:36:12 +02:00
Maxime Ripard
cc2712f24e dt-bindings: power: supply: axp20x-battery: Add AXP209 compatible
The AXP209 compatible was used in Device Trees and the driver, but it
was never documented.

Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-pm@vger.kernel.org
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-06 23:32:06 +02:00
Maxime Ripard
83abf9e150 dt-bindings: power: supply: axp20x: Add AXP803 compatible
The AXP803 compatible was introduced recently with a fallback to the
AXP813, but it was never documented.

Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-pm@vger.kernel.org
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-06 23:32:06 +02:00
Nikita Travkin
4415e4cea4 power: supply: max17042_battery: Add support for MAX77849 Fuel-Gauge
MAX77849 is a combined fuel-gauge, charger and MUIC IC. Notably,
fuel-gauge has dedicated i2c lines and seems to be fully compatible
with max17047. Add new compatible for it reusing max17047 code paths.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-06 23:23:49 +02:00
Nikita Travkin
e759e1b958 dt-bindings: power: supply: max17042: Document max77849-battery
max77849 is a combined fuel-gauge, charger and MUIC device. Add it to
the bindings documentation.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-06 23:23:48 +02:00
Solomon Chiu
46dd2965bd drm/amdgpu: Add preferred mode in modeset when freesync video mode's enabled.
[Why]
With kernel module parameter "freesync_video" is enabled, if the mode
is changed to preferred mode(the mode with highest rate), then Freesync
fails because the preferred mode is treated as one of freesync video
mode, and then be configurated as freesync video mode(fixed refresh
rate).

[How]
Skip freesync fixed rate configurating when modeset to preferred mode.

Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-08-06 17:00:50 -04:00
Paul E. McKenney
521c89b3a4 rcu: Print human-readable message for schedule() in RCU reader
The WARN_ON_ONCE() invocation within the CONFIG_PREEMPT=y version of
rcu_note_context_switch() triggers when there is a voluntary context
switch in an RCU read-side critical section, but there is quite a gap
between the output of that WARN_ON_ONCE() and this RCU-usage error.
This commit therefore converts the WARN_ON_ONCE() to a WARN_ONCE()
that explicitly describes the problem in its message.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:49 -07:00
Frederic Weisbecker
508958259b rcu: Explain why rcu_all_qs() is a stub in preemptible TREE RCU
The cond_resched() function reports an RCU quiescent state only in
non-preemptible TREE RCU implementation.  This commit therefore adds a
comment explaining why cond_resched() does nothing in preemptible kernels.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:49 -07:00
Liu Song
8211e922de rcu: Use per_cpu_ptr to get the pointer of per_cpu variable
There are a few remaining locations in kernel/rcu that still use
"&per_cpu()".  This commit replaces them with "per_cpu_ptr(&)", and does
not introduce any functional change.

Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:49 -07:00
Liu Song
eb880949ef rcu: Remove useless "ret" update in rcu_gp_fqs_loop()
Within rcu_gp_fqs_loop(), the "ret" local variable is set to the
return value from swait_event_idle_timeout_exclusive(), but "ret" is
unconditionally overwritten later in the code.  This commit therefore
removes this useless assignment.

Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Paul E. McKenney
d283aa1b04 rcu: Mark accesses in tree_stall.h
This commit marks the accesses in tree_stall.h so as to both avoid
undesirable compiler optimizations and to keep KCSAN focused on the
accesses of the core algorithm.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Paul E. McKenney
f74126dcbc rcu: Make rcu_gp_init() and rcu_gp_fqs_loop noinline to conserve stack
The kbuild test project found an oversized stack frame in rcu_gp_kthread()
for some kernel configurations.  This oversizing was due to a very large
amount of inlining, which is unnecessary due to the fact that this code
executes infrequently.  This commit therefore marks rcu_gp_init() and
rcu_gp_fqs_loop noinline_for_stack to conserve stack space.

Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Rong Chen <rong.a.chen@intel.com>
[ paulmck: noinline_for_stack per Nathan Chancellor. ]
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Paul E. McKenney
d9ee962feb rcu: Mark lockless ->qsmask read in rcu_check_boost_fail()
Accesses to ->qsmask are normally protected by ->lock, but there is an
exception in the diagnostic code in rcu_check_boost_fail().  This commit
therefore applies data_race() to this access to avoid KCSAN complaining
about the C-language writes protected by ->lock.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Paul E. McKenney
65bfdd36c1 srcutiny: Mark read-side data races
This commit marks some interrupt-induced read-side data races in
__srcu_read_lock(), __srcu_read_unlock(), and srcu_torture_stats_print().

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Paul E. McKenney
b169246feb rcu: Start timing stall repetitions after warning complete
Systems with low-bandwidth consoles can have very large printk()
latencies, and on such systems it makes no sense to have the next RCU CPU
stall warning message start output before the prior message completed.
This commit therefore sets the time of the next stall only after the
prints have completed.  While printing, the time of the next stall
message is set to ULONG_MAX/2 jiffies into the future.

Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Sergey Senozhatsky
a80be428fb rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()
rcu_cpu_stall_reset() is one of the functions virtual CPUs
execute during VM resume in order to handle jiffies skew
that can trigger false positive stall warnings. Paul has
pointed out that this approach is problematic because
rcu_cpu_stall_reset() disables RCU grace period stall-detection
virtually forever, while in fact it can just restart the
stall-detection timeout.

Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Sergey Senozhatsky
ccfc9dd691 rcu/tree: Handle VM stoppage in stall detection
The soft watchdog timer function checks if a virtual machine
was suspended and hence what looks like a lockup in fact
is a false positive.

This is what kvm_check_and_clear_guest_paused() does: it
tests guest PVCLOCK_GUEST_STOPPED (which is set by the host)
and if it's set then we need to touch all watchdogs and bail
out.

Watchdog timer function runs from IRQ, so PVCLOCK_GUEST_STOPPED
check works fine.

There is, however, one more watchdog that runs from IRQ, so
watchdog timer fn races with it, and that watchdog is not aware
of PVCLOCK_GUEST_STOPPED - RCU stall detector.

apic_timer_interrupt()
 smp_apic_timer_interrupt()
  hrtimer_interrupt()
   __hrtimer_run_queues()
    tick_sched_timer()
     tick_sched_handle()
      update_process_times()
       rcu_sched_clock_irq()

This triggers RCU stalls on our devices during VM resume.

If tick_sched_handle()->rcu_sched_clock_irq() runs on a VCPU
before watchdog_timer_fn()->kvm_check_and_clear_guest_paused()
then there is nothing on this VCPU that touches watchdogs and
RCU reads stale gp stall timestamp and new jiffies value, which
makes it think that RCU has stalled.

Make RCU stall watchdog aware of PVCLOCK_GUEST_STOPPED and
don't report RCU stalls when we resume the VM.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Julian Wiedmann
751b1710eb rculist: Unify documentation about missing list_empty_rcu()
We have two separate sections that talk about why list_empty_rcu()
is not needed, so this commit consolidates them.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
[ paulmck: The usual wordsmithing. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Paul E. McKenney
5fcb3a5f04 rcu: Mark accesses to ->rcu_read_lock_nesting
KCSAN flags accesses to ->rcu_read_lock_nesting as data races, but
in the past, the overhead of marked accesses was excessive.  However,
that was long ago, and much has changed since then, both in terms of
hardware and of compilers.  Here is data taken on an eight-core laptop
using Intel(R) Core(TM) i9-10885H CPU @ 2.40GHz with a kernel built
using gcc version 9.3.0, with all data in nanoseconds.

Unmarked accesses (status quo), measured by three refscale runs:

	Minimum reader duration:  3.286  2.851  3.395
	Median reader duration:   3.698  3.531  3.4695
	Maximum reader duration:  4.481  5.215  5.157

Marked accesses, also measured by three refscale runs:

	Minimum reader duration:  3.501  3.677  3.580
	Median reader duration:   4.053  3.723  3.895
	Maximum reader duration:  7.307  4.999  5.511

This focused microbenhmark shows only sub-nanosecond differences which
are unlikely to be visible at the system level.  This commit therefore
marks data-racing accesses to ->rcu_read_lock_nesting.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Paul E. McKenney
2be57f7328 rcu: Weaken ->dynticks accesses and updates
Accesses to the rcu_data structure's ->dynticks field have always been
fully ordered because it was not possible to prove that weaker ordering
was safe.  However, with the removal of the rcu_eqs_special_set() function
and the advent of the Linux-kernel memory model, it is now easy to show
that two of the four original full memory barriers can be weakened to
acquire and release operations.  The remaining pair must remain full
memory barriers.  This change makes the memory ordering requirements
more evident, and it might well also speed up the to-idle and from-idle
fastpaths on some architectures.

The following litmus test, adapted from one supplied off-list by Frederic
Weisbecker, models the RCU grace-period kthread detecting an idle CPU
that is concurrently transitioning to non-idle:

	C dynticks-from-idle

	{
		DYNTICKS=0; (* Initially idle. *)
	}

	P0(int *X, int *DYNTICKS)
	{
		int dynticks;
		int x;

		// Idle.
		dynticks = READ_ONCE(*DYNTICKS);
		smp_store_release(DYNTICKS, dynticks + 1);
		smp_mb();
		// Now non-idle
		x = READ_ONCE(*X);
	}

	P1(int *X, int *DYNTICKS)
	{
		int dynticks;

		WRITE_ONCE(*X, 1);
		smp_mb();
		dynticks = smp_load_acquire(DYNTICKS);
	}

	exists (1:dynticks=0 /\ 0:x=1)

Running "herd7 -conf linux-kernel.cfg dynticks-from-idle.litmus" verifies
this transition, namely, showing that if the RCU grace-period kthread (P1)
sees another CPU as idle (P0), then any memory access prior to the start
of the grace period (P1's write to X) will be seen by any RCU read-side
critical section following the to-non-idle transition (P0's read from X).
This is a straightforward use of full memory barriers to force ordering
in a store-buffering (SB) litmus test.

The following litmus test, also adapted from the one supplied off-list
by Frederic Weisbecker, models the RCU grace-period kthread detecting
a non-idle CPU that is concurrently transitioning to idle:

	C dynticks-into-idle

	{
		DYNTICKS=1; (* Initially non-idle. *)
	}

	P0(int *X, int *DYNTICKS)
	{
		int dynticks;

		// Non-idle.
		WRITE_ONCE(*X, 1);
		dynticks = READ_ONCE(*DYNTICKS);
		smp_store_release(DYNTICKS, dynticks + 1);
		smp_mb();
		// Now idle.
	}

	P1(int *X, int *DYNTICKS)
	{
		int x;
		int dynticks;

		smp_mb();
		dynticks = smp_load_acquire(DYNTICKS);
		x = READ_ONCE(*X);
	}

	exists (1:dynticks=2 /\ 1:x=0)

Running "herd7 -conf linux-kernel.cfg dynticks-into-idle.litmus" verifies
this transition, namely, showing that if the RCU grace-period kthread
(P1) sees another CPU as newly idle (P0), then any pre-idle memory access
(P0's write to X) will be seen by any code following the grace period
(P1's read from X).  This is a simple release-acquire pair forcing
ordering in a message-passing (MP) litmus test.

Of course, if the grace-period kthread detects the CPU as non-idle,
it will refrain from reporting a quiescent state on behalf of that CPU,
so there are no ordering requirements from the grace-period kthread in
that case.  However, other subsystems call rcu_is_idle_cpu() to check
for CPUs being non-idle from an RCU perspective.  That case is also
verified by the above litmus tests with the proviso that the sense of
the low-order bit of the DYNTICKS counter be inverted.

Unfortunately, on x86 smp_mb() is as expensive as a cache-local atomic
increment.  This commit therefore weakens only the read from ->dynticks.
However, the updates are abstracted into a rcu_dynticks_inc() function
to ease any future changes that might be needed.

[ paulmck: Apply Linus Torvalds feedback. ]

Link: https://lore.kernel.org/lkml/20210721202127.2129660-4-paulmck@kernel.org/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Joel Fernandes (Google)
a86baa69c2 rcu: Remove special bit at the bottom of the ->dynticks counter
Commit b8c17e6664 ("rcu: Maintain special bits at bottom of ->dynticks
counter") reserved a bit at the bottom of the ->dynticks counter to defer
flushing of TLBs, but this facility never has been used.  This commit
therefore removes this capability along with the rcu_eqs_special_set()
function used to trigger it.

Link: https://lore.kernel.org/linux-doc/CALCETrWNPOOdTrFabTDd=H7+wc6xJ9rJceg6OL1S0rTV5pfSsA@mail.gmail.com/
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
[ paulmck: Forward-port to v5.13-rc1. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:48 -07:00
Yanfei Xu
dc87740c8a rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock
If rcu_print_task_stall() is invoked on an rcu_node structure that does
not contain any tasks blocking the current grace period, it takes an
early exit that fails to release that rcu_node structure's lock.  This
results in a self-deadlock, which is detected by lockdep.

To reproduce this bug:

tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 3 --trust-make --configs "TREE03" --kconfig "CONFIG_PROVE_LOCKING=y" --bootargs "rcutorture.stall_cpu=30 rcutorture.stall_cpu_block=1 rcutorture.fwd_progress=0 rcutorture.test_boost=0"

This will also result in other complaints, including RCU's scheduler
hook complaining about blocking rather than preemption and an rcutorture
writer stall.

Only a partial RCU CPU stall warning message will be printed because of
the self-deadlock.

This commit therefore releases the lock on the rcu_print_task_stall()
function's early exit path.

Fixes: c583bcb8f5 ("rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled")
Tested-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:42 -07:00
Yanfei Xu
e6a901a44f rcu: Fix to include first blocked task in stall warning
The for loop in rcu_print_task_stall() always omits ts[0], which points
to the first task blocking the stalled grace period.  This in turn fails
to count this first task, which means that ndetected will be equal to
zero when all CPUs have passed through their quiescent states and only
one task is blocking the stalled grace period.  This zero value for
ndetected will in turn result in an incorrect "All QSes seen" message:

rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu:    Tasks blocked on level-1 rcu_node (CPUs 12-23):
        (detected by 15, t=6504 jiffies, g=164777, q=9011209)
rcu: All QSes seen, last rcu_preempt kthread activity 1 (4295252379-4295252378), jiffies_till_next_fqs=1, root ->qsmask 0x2
BUG: sleeping function called from invalid context at include/linux/uaccess.h:156
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 70613, name: msgstress04
INFO: lockdep is turned off.
Preemption disabled at:
[<ffff8000104031a4>] create_object.isra.0+0x204/0x4b0
CPU: 15 PID: 70613 Comm: msgstress04 Kdump: loaded Not tainted
5.12.2-yoctodev-standard #1
Hardware name: Marvell OcteonTX CN96XX board (DT)
Call trace:
 dump_backtrace+0x0/0x2cc
 show_stack+0x24/0x30
 dump_stack+0x110/0x188
 ___might_sleep+0x214/0x2d0
 __might_sleep+0x7c/0xe0

This commit therefore fixes the loop to include ts[0].

Fixes: c583bcb8f5 ("rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled")
Tested-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-08-06 13:41:29 -07:00
Felix Kuehling
a43e2a0e11 drm/amdkfd: Allow querying SVM attributes that are clear
Currently the SVM get_attr call allows querying, which flags are set
in the entire address range. Add the opposite query, which flags are
clear in the entire address range. Both queries can be combined in a
single get_attr call, which allows answering questions such as, "is
this address range coherent, non-coherent, or a mix of both"?

Proposed userspace for UAPI:
https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/memory_model_queries

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yand <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06 16:12:32 -04:00
Colin Ian King
ed7c28c771 drm/amd/display: Remove redundant initialization of variable eng_id
The variable eng_id is being initialized with a value that is never
read, it is being re-assigned on the next statment. The assignment
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06 16:12:27 -04:00
Dan Carpenter
420c81c84b drm/amdgpu: check for allocation failure in amdgpu_vkms_sw_init()
Check whether the kcalloc() fails and return -ENOMEM if it does.

Fixes: 84ec374bd5 ("drm/amdgpu: create amdgpu_vkms (v4)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06 16:12:23 -04:00
Kenneth Feng
1b41d67ec9 drm/amd/pm: bug fix for the runtime pm BACO
In some systems only MACO is supported. This is to fix the problem
that runtime pm is enabled but BACO is not supported. MACO will be
handled seperately.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06 16:12:07 -04:00
Ezequiel Garcia
42ba8c3b42 mtdblock: Add comment about UBI block devices
There is a surprisingly large number of tutorials
that suggest using mtdblock to mount SquashFS filesystems
on flash devices, including NAND devices.

Given this approach is suboptimal than using UBI, and given
the UBI block device layer was introduced many years ago
specifically with this use case in mind, add a small
comment inviting users and developers to consider UBI block.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210801234509.18774-7-ezequiel@collabora.com
2021-08-06 22:05:13 +02:00
Ezequiel Garcia
6bc219b7b2 mtdblock: Update old JFFS2 mention in Kconfig
JFFS2 can be mounted without 'mtdblock' since
a really, really long time. Some git-log
archaeology shows that in 2006 it was possible
to use 'root=' to mount a JFFS2 rootfs:

  commit e9482b4374
  Author: Joern Engel <joern@wh.fh-wedel.de>
  Date:   Tue May 30 14:25:46 2006 +0200

      [MTD] Allow alternate JFFS2 mount variant for root filesystem.

      With this patch, "root=mtd3" and "root=mtd:foo" work for a JFFS2 rootfs.

However, there are still plenty of tutorials that mention
mtdblock, so users are still taking this route. Update the Kconfig
to reflect this is no longer needed.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210801234509.18774-6-ezequiel@collabora.com
2021-08-06 22:05:10 +02:00
Jason Wang
74a021a632 mtd: rawnand: remove never changed ret variable
The ret variable used for returning value in the function
`meson_nfc_rw_cmd_prepare_and_execute` is never change after initialising.
Therefore, we can remove it safely and return 0 at the end of the function.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210803113300.24230-1-wangborong@cdjrlc.com
2021-08-06 22:01:56 +02:00
Vladimir Molokov
014665ffd7 mtd: rawnand: omap: Fix kernel doc warning on 'calcuate' typo
Fix a trivial typo which is reported after enabling W=1 level of warnings:

  drivers/mtd/nand/raw/omap2.c:927: warning: expecting prototype
    for omap_calcuate_ecc(). Prototype was for omap_calculate_ecc() instead

Signed-off-by: Vladimir Molokov <vladimir@molokov.se>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210801205909.7102-1-vladimir@molokov.se
2021-08-06 22:01:56 +02:00
Daniel Palmer
df12a75a2b mtd: spinand: core: Properly fill the OOB area.
The comment in spinand_write_to_cache_op() says that
spinand_ondie_ecc_prepare_io_req() should 0xff fill the OOB
area but it doesn't.

This causes the OOB area to get filled with zeros
and anytime the first page in a block the bad block marker
is cleared and it becomes a bad block on the next boot.

This was observed on Longsys FORSEE branded parts and
might be specific to these parts.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210617110842.2358461-1-daniel@0x0f.com
2021-08-06 22:01:56 +02:00
Lukas Bulwahn
5c2f387b48 MAINTAINERS: repair Miquel Raynal's email address
Commit d70c6b0260 ("MAINTAINERS: Add PL353 NAND controller entry") and
commit 813d52799a ("MAINTAINERS: Add PL353 SMC entry") adds Miquel
Raynal as maintainer with an obvious invalid email address, which can be
easily fixed.

Repair this copy-and-paste error in Miquel Raynal's email address.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210726144949.10439-1-lukas.bulwahn@gmail.com
2021-08-06 21:57:14 +02:00
Linus Torvalds
c9194f32bf A Regression fix, bug fix, and a comment cleanup for ext4.
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmENbm0ACgkQ8vlZVpUN
 gaNEEQf7B8GXPqJvRgqhJwCdqmZqz8DB7dfjqT0SB99f1EL3VoeHEvo+yEgMqD3L
 cSYRFh4efEHgr51HSZoIPINqcU9hs86SvFmjd6jWIcnY/EJLd0g3e8aEWpJ3S5rR
 3avSC4tiDbn34GgDeoR2DFG6RsGbRxDUEEzkrd8h7Hx6q39s3aXdi89lBmBe8rg/
 lIVaeivZrZ7SfY/YFEziF0P7KurJNju6lGwqm0xAqu79J9QaabXMF1u5GPjUi2rw
 TIaLMSP6O5VQbQwskcTIhJlKSAB4aUIB+fMV5Zi2cCXAKGdzK24xdM5VbzOeKAAX
 1EwOE9GEyytpxD1P0zb8vVGsJW3wjQ==
 =hQAS
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "A regression fix, bug fix, and a comment cleanup for ext4"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix potential htree corruption when growing large_dir directories
  ext4: remove conflicting comment from __ext4_forget
  ext4: fix potential uninitialized access to retval in kmmpd
2021-08-06 12:55:07 -07:00
Manivannan Sadhasivam
b48027083a mtd: rawnand: Fix probe failure due to of_get_nand_secure_regions()
Due to 14f97f0b8e, the rawnand platforms without "secure-regions"
property defined in DT fails to probe. The issue is,
of_get_nand_secure_regions() errors out if
of_property_count_elems_of_size() returns a negative error code.

If the "secure-regions" property is not present in DT, then also we'll
get -EINVAL from of_property_count_elems_of_size() but it should not
be treated as an error for platforms not declaring "secure-regions"
in DT.

So fix this behaviour by checking for the existence of that property in
DT and return 0 if it is not present.

Fixes: 14f97f0b8e ("mtd: rawnand: Add a check in of_get_nand_secure_regions()")
Reported-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210727062813.32619-1-manivannan.sadhasivam@linaro.org
2021-08-06 21:44:16 +02:00
Desmond Cheong Zhi Xi
b7abb05168 mtd: fix lock hierarchy in deregister_mtd_blktrans
There is a lock hierarchy of major_names_lock --> mtd_table_mutex. One
existing chain is as follows:

1. major_names_lock --> loop_ctl_mutex (when blk_request_module calls
loop_probe)

2. loop_ctl_mutex --> bdev->bd_mutex (when loop_control_ioctl calls
loop_remove, which then calls del_gendisk)

3. bdev->bd_mutex --> mtd_table_mutex (when blkdev_get_by_dev calls
__blkdev_get, which then calls blktrans_open)

Since unregister_blkdev grabs the major_names_lock, we need to call it
outside the critical section for mtd_table_mutex, otherwise we invert
the lock hierarchy.

Reported-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210717100719.728829-1-desmondcheongzx@gmail.com
2021-08-06 21:44:16 +02:00
Colin Ian King
99dc4ad992 mtd: devices: mchp48l640: Fix memory leak on cmd
The allocation for cmd is not being kfree'd on the return leading to
a memory leak. Fix this by kfree'ing it.

Addresses-Coverity: ("Resource leak")
Fixes: 88d1250267 ("mtd: devices: add support for microchip 48l640 EERAM")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210712145214.101377-1-colin.king@canonical.com
2021-08-06 21:44:09 +02:00
Linus Torvalds
2c4b1ec683 Fix tracepoint race between static_call and callback data
As callbacks to a tracepoint are paired with the data that is passed in when
 the callback is registered to the tracepoint, it must have that data passed
 to the callback when the tracepoint is triggered, else bad things will
 happen. To keep the two together, they are both assigned to a tracepoint
 structure and added to an array. The tracepoint call site will dereference
 the structure (via RCU) and call the callback in that structure along with
 the data in that structure. This keeps the callback and data tightly
 coupled.
 
 Because of the overhead that retpolines have on tracepoint callbacks, if
 there's only one callback attached to a tracepoint (a common case), then it
 is called via a static call (code modified to do a direct call instead of an
 indirect call). But to implement this, the data had to be decoupled from the
 callback, as now the callback is implemented via a direct call from the
 static call and not an indirect call from the dereferenced structure.
 
 Note, the static call only calls a callback used when there's a single
 callback attached to the tracepoint. If more than one callback is attached
 to the same tracepoint, then the static call will call an iterator
 function that goes back to dereferencing the structure keeping the callback
 and its data tightly coupled again.
 
 Issues can arise when going from 0 callbacks to one, as the static call is
 assigned to the callback, and it must take care that the data passed to it
 is loaded before the static call calls the callback. Going from 1 to 2
 callbacks is not an issue, as long as the static call is updated to the
 iterator before the tracepoint structure array is updated via RCU. Going
 from 2 to more or back down to 2 is not an issue as the iterator can handle
 all theses cases. But going from 2 to 1, care must be taken as the static
 call is now calling a callback and the data that is loaded must be the data
 for that callback.
 
 Care was taken to ensure the callback and data would be in-sync, but after
 a bug was reported, it became clear that not enough was done to make sure
 that was the case. These changes address this.
 
 The first change is to compare the old and new data instead of the old and
 new callback, as it's the data that can corrupt the callback, even if the
 callback is the same (something getting freed).
 
 The next change is to convert these transitions into states, to make it
 easier to know when a synchronization is needed, and to perform those
 synchronizations. The problem with this patch is that it slows down
 disabling all events from under a second, to making it take over 10 seconds
 to do the same work. But that is addressed in the final patch.
 
 The final patch uses the RCU state functions to keep track of the RCU state
 between the transitions, and only needs to perform the synchronization if an
 RCU synchronization hasn't been done already. This brings the performance of
 disabling all events back to its original value. That's because no
 synchronization is required between disabling tracepoints but is required
 when enabling a tracepoint after its been disabled. If an RCU
 synchronization happens after the tracepoint is disabled, and before it is
 re-enabled, there's no need to do the synchronization again.
 
 Both the second and third patch have subtle complexities that they are
 separated into two patches. But because the second patch causes such a
 regression in performance, the third patch adds a "Fixes" tag to the second
 patch, such that the two must be backported together and not just the second
 patch.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYQ15TBQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qnmmAP4hoA34CDr5hrd8mYLeKptW63f5Nd1w
 fVZjprfa1wJhZAEAq39OeRCT4Fb2hIeZNBNUnLU90f+J6NH5QFDEhW+CkAI=
 =JcZS
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Fix tracepoint race between static_call and callback data

  As callbacks to a tracepoint are paired with the data that is passed
  in when the callback is registered to the tracepoint, it must have
  that data passed to the callback when the tracepoint is triggered,
  else bad things will happen. To keep the two together, they are both
  assigned to a tracepoint structure and added to an array. The
  tracepoint call site will dereference the structure (via RCU) and call
  the callback in that structure along with the data in that structure.
  This keeps the callback and data tightly coupled.

  Because of the overhead that retpolines have on tracepoint callbacks,
  if there's only one callback attached to a tracepoint (a common case),
  then it is called via a static call (code modified to do a direct call
  instead of an indirect call). But to implement this, the data had to
  be decoupled from the callback, as now the callback is implemented via
  a direct call from the static call and not an indirect call from the
  dereferenced structure.

  Note, the static call only calls a callback used when there's a single
  callback attached to the tracepoint. If more than one callback is
  attached to the same tracepoint, then the static call will call an
  iterator function that goes back to dereferencing the structure
  keeping the callback and its data tightly coupled again.

  Issues can arise when going from 0 callbacks to one, as the static
  call is assigned to the callback, and it must take care that the data
  passed to it is loaded before the static call calls the callback.
  Going from 1 to 2 callbacks is not an issue, as long as the static
  call is updated to the iterator before the tracepoint structure array
  is updated via RCU. Going from 2 to more or back down to 2 is not an
  issue as the iterator can handle all theses cases. But going from 2 to
  1, care must be taken as the static call is now calling a callback and
  the data that is loaded must be the data for that callback.

  Care was taken to ensure the callback and data would be in-sync, but
  after a bug was reported, it became clear that not enough was done to
  make sure that was the case. These changes address this.

  The first change is to compare the old and new data instead of the old
  and new callback, as it's the data that can corrupt the callback, even
  if the callback is the same (something getting freed).

  The next change is to convert these transitions into states, to make
  it easier to know when a synchronization is needed, and to perform
  those synchronizations. The problem with this patch is that it slows
  down disabling all events from under a second, to making it take over
  10 seconds to do the same work. But that is addressed in the final
  patch.

  The final patch uses the RCU state functions to keep track of the RCU
  state between the transitions, and only needs to perform the
  synchronization if an RCU synchronization hasn't been done already.
  This brings the performance of disabling all events back to its
  original value. That's because no synchronization is required between
  disabling tracepoints but is required when enabling a tracepoint after
  its been disabled. If an RCU synchronization happens after the
  tracepoint is disabled, and before it is re-enabled, there's no need
  to do the synchronization again.

  Both the second and third patch have subtle complexities that they are
  separated into two patches. But because the second patch causes such a
  regression in performance, the third patch adds a "Fixes" tag to the
  second patch, such that the two must be backported together and not
  just the second patch"

* tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracepoint: Use rcu get state and cond sync for static call updates
  tracepoint: Fix static call function vs data state mismatch
  tracepoint: static call: Compare data on transition from 2->1 callees
2021-08-06 12:36:46 -07:00
Linus Torvalds
9917de73b4 Power management fixes for 5.14-rc5
Fix a recent regression in the timer events oriented (TEO) cpuidle
 governor causing it to misbehave when idle state 0 is disabled and
 rename two local variables for improved clarity on top of that.
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmENdOgSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx+rsP/RogPz4EliYXBAazVGaw4PDx/5fokXqW
 P1bCZCnNnfBmUirW6nBBk7C6J77wfCWgir2kCrnoRib133hXLLjCHrS1tW68DEy2
 duQBht2ccfkm0EVF8Zzs/8pjoukOArGw5I5DnGBabgHd7zB2eZheMR5A3JC5VdMv
 jUF4d2S1wRD81yEC+KajyOhVfaUA1Hn/PrcIcTzWhmW+z9jyzCzp3E3EJtaEp42b
 Uyh5GsZjR3Nn1g8lMkYRLSLOOBKaMFdEMTE76ZkQYSphJcj7anFMI00ftc6ash4W
 lnaYRiUH55gGqpwoZ0io9B/whH+C4IXUdq8w1RYwS9q25wdgR1/UxrV7zcqAWPH6
 vnx7gTACuNxrIvN6G3l0AiS3Z6nrFpB4DdlwUABWp3ywk69YFyqOFor3NwVWTnLh
 Dnbommg3KlEGtfUnSTpsdL0QLBeKtGTe/wNm16Oxyd7A0mqOx/1x3Ue4NaxBKwCN
 CeCd//ztZNs7wUw52gZwmCNPotQMgc11ewuRCbM3Hnj5bdiSrAD9/IhK9eJ/K9cV
 O/j282AKUXiYjua4aL1WjMmmqb2ktRQcofeUCsRNhx7kC4JiDTHV5aEahftqlwt3
 sVu1IrfhX1BLU8PTuJMvIRrvJmXcUwLi0fkcDnLjSg0BiQYyTipnB8PT2q6swTM/
 BUb+TU8jeRQw
 =CPqq
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "Fix a recent regression in the timer events oriented (TEO) cpuidle
  governor causing it to misbehave when idle state 0 is disabled and
  rename two local variables for improved clarity on top of that"

* tag 'pm-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: teo: Rename two local variables in teo_select()
  cpuidle: teo: Fix alternative idle state lookup
2021-08-06 12:30:29 -07:00