We are preparing to support two independent DSI hosts in the DSI/DPU
code. To remove possible confusion (as both configurations can be
referenced as dual DSI) let's rename old "dual DSI" (two DSI hosts
driving single device, with clocks being locked) to "bonded DSI".
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-2-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[DB: add one extra hunk added by one previous patches]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
During board bringups its useful to have a DSI test pattern
generator to isolate a DPU vs a DSI issue and focus on the relevant
hardware block.
To facilitate this, add an API which triggers the DSI controller
test pattern. The expected output is a rectangular checkered pattern.
This has been validated on a single DSI video mode panel by calling it
right after drm_panel_enable() which is also the ideal location to use
this as the DSI host and the panel have been initialized by then.
Further validation on dual DSI and command mode panel is pending.
If there are any fix ups needed for those, it shall be applied on top
of this change.
Changes in v2:
- generate the new dsi.xml.h and update the bitfield names
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/1626922232-29105-2-git-send-email-abhinavk@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Update the DSI controller header XML file to add registers
and bitfields to support rectangular checkered pattern
generator.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/1626922232-29105-1-git-send-email-abhinavk@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[DB: removed headergen commit changes]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add support for v2.5.0 DSI block in the SC7280 SoC.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1624365748-24224-4-git-send-email-rajeevny@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of fetching shared timing through an extra function call, get
them directly from msm_dsi_phy_enable.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210709210729.953114-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add some missing newlines to the various DRM printks in this file.
Noticed while looking at logs. While we're here unbreak quoted
strings so grepping them is easier.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210708065619.999199-1-swboyd@chromium.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
msm_atomic is doing vblank get/put's already,
currently there no need to duplicate the effort in MDP4
Fix warning:
...
WARNING: CPU: 3 PID: 79 at drivers/gpu/drm/drm_vblank.c:1194 drm_vblank_put+0x1cc/0x1d4
...
and multiple vblank time-outs:
...
msm 5100000.mdp: vblank time out, crtc=1
...
Tested on Nexus 7 2013 (deb), LTS 5.10.50.
Introduced by: 119ecb7fd3 ("drm/msm/mdp4: request vblank during modeset")
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210715060925.7880-1-david@ixit.cz
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes if condition, which never worked inside mdp4_kms_init, since
HW detection has been done later in mdp4_hw_init.
Fixes: eb2b47bb9a ("drm/msm/mdp4: only use lut_clk on mdp4.2+")
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210705231641.315804-2-david@ixit.cz
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Inspired by MDP5 code.
Also use DRM_DEV_INFO for MDP version as MDP5 does.
Cosmetic change: uint32_t -> u32 - checkpatch suggestion.
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210705231641.315804-1-david@ixit.cz
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
When it fail to create crtc_event kthread, it just jump to err_msm_uninit,
while the 'ret' is not updated. So assign the return code before that.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210705134302.315813-1-liwei391@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
None of supported devies uses "gdsc" regulator for DSI. GDSC support is
now implemented as a power domain. Drop old code and config handling
gdsc regulator requesting and enabling.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210701000015.3347713-1-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add the required changes to support 7nm pll/phy in CPHY mode.
This adds a "qcom,dsi-phy-cphy-mode" property for the PHY node to enable
the CPHY mode.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210617144349.28448-4-jonathan@marek.ca
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Document a new phy-type property which will be used to determine whether
the phy should operate in D-PHY or C-PHY mode.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210617144349.28448-3-jonathan@marek.ca
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These got lost when going from .txt to .yaml bindings, add them back.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Fixes: 8fc939e72f ("dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings")
Link: https://lore.kernel.org/r/20210617144349.28448-2-jonathan@marek.ca
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Using list_move_tail() instead of list_del() + list_add_tail() in msm_gem.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20210609072838.1369371-1-libaokun1@huawei.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Let's use the newly-added nvmem_cell_read_variable_le_u32() to future
proof ourselves a little bit.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210521134516.v2.1.Id496c6fea0cb92ff6ea8ef1faf5d468eb09465e3@changeid
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
On a5xx and a6xx devices that are using CP_WHERE_AM_I to update a
ringbuffer read-ptr shadow value, periodically emit a CP_WHERE_AM_I
every 32 commands, so that a later submit waiting for ringbuffer
space to become available sees partial progress, rather than not
seeing rptr advance at all until the GPU gets to the end of the
submit that it is currently chewing on.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210428193654.1498482-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective msm functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
v2:
* rebase onto latest upstream
* remove declaration of msm_gem_mmap_obj() from msm_fbdev.c
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210706084753.8194-1-tzimmermann@suse.de
[squash in missing VM_DONTEXPAND flag]
Signed-off-by: Rob Clark <robdclark@chromium.org>
-----BEGIN PGP SIGNATURE-----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=FAeG
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.14-2021-08-07' of git://git.kernel.dk/linux-block
Pull io_uring from Jens Axboe:
"A few io-wq related fixes:
- Fix potential nr_worker race and missing max_workers check from one
path (Hao)
- Fix race between worker exiting and new work queue (me)"
* tag 'io_uring-5.14-2021-08-07' of git://git.kernel.dk/linux-block:
io-wq: fix lack of acct->nr_workers < acct->max_workers judgement
io-wq: fix no lock protection of acct->nr_worker
io-wq: fix race between worker exiting and activating free worker
* A fix to avoid dereferencing a null task pointer while walking the
stack.
* A fix to the memory size in the HiFive Unleashed device tree.
* A fix to disable stack protectors when randstruct is enabled, which
results in non-deterministic offsets during module builds.
* A pair of fixes to avoid relying on a constant physical memory base
for the non-XIP builds.
-----BEGIN PGP SIGNATURE-----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=yf+K
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- avoid dereferencing a null task pointer while walking the stack
- fix the memory size in the HiFive Unleashed device tree
- disable stack protectors when randstruct is enabled, which results in
non-deterministic offsets during module builds
- a pair of fixes to avoid relying on a constant physical memory base
for the non-XIP builds
* tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED"
riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion
riscv: Disable STACKPROTECTOR_PER_TASK if GCC_PLUGIN_RANDSTRUCT is enabled
riscv: dts: fix memory size for the SiFive HiFive Unmatched
riscv: stacktrace: Fix NULL pointer dereference
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS working again
-----BEGIN PGP SIGNATURE-----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=M+2q
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS work again
* tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: cancel sub_make_done for the install target to fix DKMS
scripts: checkversion: modernize linux/version.h search strings
mips: Fix non-POSIX regexp
x86/tools/relocs: Fix non-POSIX regexp
commit <47595e3286> ("<MAINTAINERS: Mark some staging directories>")
indicated the ipx network layer as obsolete in Jan 2018,
updated in the MAINTAINERS file
now, after being exposed for 3 years to refactoring,
so to delete the ipx net layer related code for good.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling with clang in certain configurations, an objtool warning
appears:
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.o: warning: objtool:
ipq806x_gmac_probe() falls through to next function phy_modes()
This happens because the unreachable annotation in the third switch
statement is not eliminated. The compiler should know that the first
default case would prevent the second and third from being reached as
the comment notes but sanitizer options can make it harder for the
compiler to reason this out.
Help the compiler out by eliminating the unreachable() annotation and
unifying the default case error handling so that there is no objtool
warning, the meaning of the code stays the same, and there is less
duplication.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karsten Graul says:
====================
s390/qeth: Add bridge to switchdev LEARNING_SYNC
The netlink bridgeport attribute LEARNING_SYNC can be used to enable
qeth interfaces to report MAC addresses that are reachable via this
qeth interface to the attached software bridge via switchdev
notifiers SWITCHDEV_FDB_ADD_TO_BRIDGE and SWITCHDEV_FDB_DEL_TO_BRIDGE.
Extend this support of LEARNING_SYNC to the bridge to switchdev notifiers
SWITCHDEV_FDB_ADD_TO_DEVICE and SWITCHDEV_FDB_DEL_TO_DEVICE.
Add the capability to sync MAC addresses that are learned by a
north-facing, non-isolated bridgeport of a software bridge to
south-facing, isolated bridgeports. This enables the software bridge to
influence south to north traffic steering in hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the MAC addresses that are registered with a LEARNING_SYNC qeth
device with the events announced by the attached software bridge.
Typically the LEARNING_SYNC qeth bridge port has an isolated sibling (the
default interface of an 'HiperSockets Converged Interface' (HSCI)). Update
the MACs of isolated siblings as well, to avoid unnecessary flooding in
the attached virtualized switches.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QETH HiperSockets devices with LEARNING_SYNC capability can be used
to construct a linux bridge with:
2 isolated southbound interfaces:
a) a default network interface
b) a LEARNING-SYNC HiperSockets interface
and 1 non-isolated northbound interface. This is called a 'HiperSockets
Converged Interface' (HSCI).
The existing LEARNING_SYNC functionality is used to update the bridge fdb
with MAC addresses that should be sent-out via the HiperSockets interface,
instead of the default network interface.
Add handling of switchdev events SWITCHDEV_FDB_ADD_TO_DEVICE and
SWITCHDEV_FDB_DEL_TO_DEVICE to the qeth LEARNING_SYNC functionality. Thus
if the northbound bridgeport of an HSCI doesn't only have a single static
MAC address, but instead is a learning bridgeport, work is enqueued, so
the HiperSockets virtual switch (that is external to this Linux instance)
can update its fdb.
When BRIDGE is a loadable module, QETH_L2 mustn't be built-in:
drivers/s390/net/qeth_l2_main.o: in function 'qeth_l2_switchdev_event':
drivers/s390/net/qeth_l2_main.c:927: undefined reference to
'br_port_flag_is_set'
Add Kconfig dependency to enforce usable configurations.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conditionally register a qeth_l2 switchdev_event handler to handle bridge
to device switchdev events, when at least one qeth interface has the
bridgeport attribute LEARNING_SYNC enabled.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The true check on the variable startable in the ternary operator
is always false because the previous if statement handles the true
condition for startable. Hence the ternary check is dead code and
can be removed.
Addresses-Coverity: ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lockdep detected possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mhiwwan->rx_lock);
local_irq_disable();
lock(&mhi_cntrl->pm_lock);
lock(&mhiwwan->rx_lock);
<Interrupt>
lock(&mhi_cntrl->pm_lock);
*** DEADLOCK ***
To prevent this we need to disable the soft-interrupts when taking
the rx_lock.
Cc: stable@vger.kernel.org
Fixes: fa588eba63 ("net: Add Qcom WWAN control driver")
Reported-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that all external port are actually isolated from each other,
so no packets are leaked.
Fixes: ec6698c272 ("net: dsa: add support for Atheros AR9331 built-in switch")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang says:
====================
r8169: adjust the setting for RTL8106e
These patches are uesed to avoid the delay of link-up interrupt, when
enabling ASPM for RTL8106e. The patch #1 is used to enable ASPM if
it is possible. And the patch #2 is used to modify the entrance latencies
of L0 and L1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The original L0 and L1 entrance latencies of RTL8106e are 4us. And
they cause the delay of link-up interrupt when enabling ASPM. Change
the L0 entrance latency to 7us and L1 entrance latency to 32us. Then,
they could avoid the issue.
Tested-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 1ee8856de8.
This is used to re-enable ASPM on RTL8106e, if it is possible.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-08-07
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 9 day(s) which contain
a total of 4 files changed, 8 insertions(+), 7 deletions(-).
The main changes are:
1) Fix integer overflow in htab's lookup + delete batch op, from Tatsuhiko Yasumatsu.
2) Fix invalid fd 0 close in libbpf if BTF parsing failed, from Daniel Xu.
3) Fix libbpf feature probe for BPF_PROG_TYPE_CGROUP_SOCKOPT, from Robin Gögge.
4) Fix minor libbpf doc warning regarding code-block language, from Randy Dunlap.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The Identify Memory Device command returns information about the
volatile only and persistent only memory capacities. Store those values
in the cxl_mem structure for later use. While at it, reuse those
calculations to calculate the ram and pmem ranges.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210617221620.1904031-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The one of the latest change to the driver reveals the problem that
the error codes from callee aren't propagated to the caller of
__sso_led_dt_parse(). Fix this accordingly.
Fixes: 9999908ca1 ("leds: lgm-sso: Put fwnode in any case during ->probe()")
Fixes: c3987cd2bc ("leds: lgm: Add LED controller driver for LGM SoC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The ASUS GV301QH sound appears to work well with the quirk for
ALC294_FIXUP_ASUS_DUAL_SPK.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210807025805.27321-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 9b79878ced.
The removal of this config exposes CONFIG_PHYS_RAM_BASE for all kernel
types: this value being implementation-specific, this breaks the
genericity of the RISC-V kernel so revert it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The usage of CONFIG_PHYS_RAM_BASE for all kernel types was a mistake:
this value is implementation-specific and this breaks the genericity of
the RISC-V kernel.
Fix this by introducing a new variable phys_ram_base that holds this
value at runtime and use it in the kernel physical address conversion
macro. Since this value is used only for XIP kernels, evaluate it only if
CONFIG_XIP_KERNEL is set which in addition optimizes this macro for
standard kernels at compile-time.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 44c9225729 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Simon Horman says:
====================
This short series provides minor enhancements to the
sample code in samples/bpf/xdpsock_user.c.
Each change is explained more fully in its own commit message.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
There is a forward declaration of ip_fast_csum() just before its
implementation, remove the unneeded forward declaration.
While at it mark the implementation as static inline.
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/bpf/20210806122855.26115-3-simon.horman@corigine.com
The xdpsock sample application is a useful base for experiment's around
AF_XDP sockets. Compiling the sample outside of the kernel tree is made
harder then it has to be as the sample includes two headers and that are
not installed by 'make install_header' nor are usually part of
distributions kernel headers.
The first header asm/barrier.h is not used and can just be dropped.
The second linux/compiler.h are only needed for the decorator __force
and are only used in ip_fast_csum(), csum_fold() and
csum_tcpudp_nofold(). These functions are copied verbatim from
include/asm-generic/checksum.h and lib/checksum.c. While it's fine to
copy and use these functions in the sample application the decorator
brings no value and can be dropped together with the include.
With this change it's trivial to compile the xdpsock sample outside the
kernel tree from xdpsock_user.c and xdpsock.h.
$ gcc -o xdpsock xdpsock_user.c -lbpf -lpthread
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/bpf/20210806122855.26115-2-simon.horman@corigine.com
Since 5.13 QE's ucc nodes can't get interrupts from devicetree:
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
Now fw_devlink expects driver to create and probe a struct device
for interrupt controller.
So lets convert this driver to simple platform_device with probe().
Also use platform_get_ and devm_ family function to get/allocate
resources and drop unused .compatible = "qeic".
[1] - https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com
Fixes: e590474768 ("driver core: Set fw_devlink=on by default")
Fixes: ea718c6990 ("Revert "Revert "driver core: Set fw_devlink=on by default""")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
In __htab_map_lookup_and_delete_batch(), hash buckets are iterated
over to count the number of elements in each bucket (bucket_size).
If bucket_size is large enough, the multiplication to calculate
kvmalloc() size could overflow, resulting in out-of-bounds write
as reported by KASAN:
[...]
[ 104.986052] BUG: KASAN: vmalloc-out-of-bounds in __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.986489] Write of size 4194224 at addr ffffc9010503be70 by task crash/112
[ 104.986889]
[ 104.987193] CPU: 0 PID: 112 Comm: crash Not tainted 5.14.0-rc4 #13
[ 104.987552] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 104.988104] Call Trace:
[ 104.988410] dump_stack_lvl+0x34/0x44
[ 104.988706] print_address_description.constprop.0+0x21/0x140
[ 104.988991] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989327] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989622] kasan_report.cold+0x7f/0x11b
[ 104.989881] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990239] kasan_check_range+0x17c/0x1e0
[ 104.990467] memcpy+0x39/0x60
[ 104.990670] __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990982] ? __wake_up_common+0x4d/0x230
[ 104.991256] ? htab_of_map_free+0x130/0x130
[ 104.991541] bpf_map_do_batch+0x1fb/0x220
[...]
In hashtable, if the elements' keys have the same jhash() value, the
elements will be put into the same bucket. By putting a lot of elements
into a single bucket, the value of bucket_size can be increased to
trigger the integer overflow.
Triggering the overflow is possible for both callers with CAP_SYS_ADMIN
and callers without CAP_SYS_ADMIN.
It will be trivial for a caller with CAP_SYS_ADMIN to intentionally
reach this overflow by enabling BPF_F_ZERO_SEED. As this flag will set
the random seed passed to jhash() to 0, it will be easy for the caller
to prepare keys which will be hashed into the same value, and thus put
all the elements into the same bucket.
If the caller does not have CAP_SYS_ADMIN, BPF_F_ZERO_SEED cannot be
used. However, it will be still technically possible to trigger the
overflow, by guessing the random seed value passed to jhash() (32bit)
and repeating the attempt to trigger the overflow. In this case,
the probability to trigger the overflow will be low and will take
a very long time.
Fix the integer overflow by calling kvmalloc_array() instead of
kvmalloc() to allocate memory.
Fixes: 057996380a ("bpf: Add batch ops to all htab bpf map")
Signed-off-by: Tatsuhiko Yasumatsu <th.yasumatsu@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210806150419.109658-1-th.yasumatsu@gmail.com
Use "code-block: none" instead of "c" for non-C-language code blocks.
Removes these warnings:
lnx-514-rc4/Documentation/bpf/libbpf/libbpf_naming_convention.rst:111: WARNING: Could not lex literal_block as "c". Highlighting skipped.
lnx-514-rc4/Documentation/bpf/libbpf/libbpf_naming_convention.rst:124: WARNING: Could not lex literal_block as "c". Highlighting skipped.
Fixes: f42cfb469f ("bpf: Add documentation for libbpf including API autogen")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210802015037.787-1-rdunlap@infradead.org