Unmask upper DSCP bits when calling ip_route_output() so that in the
future it could perform the FIB lookup according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rtw89 is continuously adjusting code to support MLO. The major changes
are listed below:
rtw88:
* fix USB not transmitting beacon in AP mode
rtw89:
* complete BT-coexistence code for RTL8852BT
* fix throughput degrade of VHT rate for RTL8851B/8852A/8852B/8852BT
* enable WoWLAN net-detect for more one chip, RTL8922A
-----BEGIN PGP SIGNATURE-----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=G2FN
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2024-09-05' of https://github.com/pkshih/rtw
rtw-next patches for v6.12
The rtw89 is continuously adjusting code to support MLO. The major changes
are listed below:
rtw88:
* fix USB not transmitting beacon in AP mode
rtw89:
* complete BT-coexistence code for RTL8852BT
* fix throughput degrade of VHT rate for RTL8851B/8852A/8852B/8852BT
* enable WoWLAN net-detect for more one chip, RTL8922A
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240904074637.1352864-1-nichen@iscas.ac.cn
Use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() +
clk_prepare_enable(), which can make the clk consistent with the device
life cycle and reduce the risk of unreleased clk resources. Since the
device framework has automatically released the clk resource, there is
no need to execute clk_disable_unprepare(clk) on the error path.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240903110205.4127706-3-lizetao1@huawei.com
Use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() +
clk_prepare_enable(), which can make the clk consistent with the device
life cycle and reduce the risk of unreleased clk resources. Since the
device framework has automatically released the clk resource, there is
no need to execute clk_disable_unprepare(clk) on the error path, drop
the clk_disable_unprepare label, and the original error process can change
to dispose_irq.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240903110205.4127706-2-lizetao1@huawei.com
In the `wilc_parse_join_bss_param` function, the TSF field of the `ies`
structure is accessed after the RCU read-side critical section is
unlocked. According to RCU usage rules, this is illegal. Reusing this
pointer can lead to unpredictable behavior, including accessing memory
that has been updated or causing use-after-free issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the TSF value is now stored in a local variable
`ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is
then assigned using this local variable, ensuring that the TSF value is
safely accessed.
Fixes: 205c50306a ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/tencent_466225AA599BA49627FB26F707EE17BC5407@qq.com
Replace one-element array with a flexible-array member in
`struct host_cmd_ds_802_11_scan_ext`.
With this, fix the following warning:
elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------
elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1)
elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex]
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/linux-hardening/ZsZNgfnEwOcPdCly@black.fi.intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/ZsZa5xRcsLq9D+RX@elsanto
In spi_geni_remove(), the free_irq() sequence is different from that
on the probe error path. And the IRQ will still remain and it's interrupt
handler may use the dma channel after release dma channel and before free
irq, which is not secure, fix it.
Fixes: b59c122484 ("spi: spi-geni-qcom: Add support for GPI dma")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, switch to devm_pm_runtime_enable() to fix it, so the
pm_runtime_disable() in probe error path and remove function
can be removed.
Fixes: cfdab2cd85 ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mt8365_i2s_enum and mt8365_i2s_hd_str variables are not
used anywhere, but cause a warning when building with C=1
or when enabling -Wunused-const-variable:
sound/soc/mediatek/mt8365/mt8365-dai-i2s.c:781:27: error: 'mt8365_i2s_hd_str' defined but not used [-Werror=unused-const-variable=]
781 | static const char * const mt8365_i2s_hd_str[] = {
| ^~~~~~~~~~~~~~~~~
Remove these for the moment, they can be added back if a
user comes up.
Fixes: 402bbb13a1 ("ASoC: mediatek: mt8365: Add I2S DAI support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240907200053.3027553-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On x86, the header is not already included implicitly,
breaking compile-testing:
In file included from sound/soc/mediatek/mt8365/mt8365-afe-common.h:19,
from sound/soc/mediatek/mt8365/mt8365-afe-pcm.c:18:
sound/soc/mediatek/mt8365/mt8365-afe-pcm.c: In function 'mt8365_afe_cm2_mux_conn':
sound/soc/mediatek/mt8365/mt8365-reg.h:952:41: error: implicit declaration of function 'FIELD_PREP' [-Wimplicit-function-declaration]
952 | #define CM2_AFE_CM2_CONN_CFG1(x) FIELD_PREP(CM2_AFE_CM2_CONN_CFG1_MASK, (x))
| ^~~~~~~~~~
Included it ahead of the field definitions.
Fixes: 38c7c9ddc7 ("ASoC: mediatek: mt8365: Add common header")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240908221754.2210857-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The TLV320DAC3100 Audio DAC has 25 built-in digital audio processing blocks
(PRBs). Each of these PRBs has a static filter structure with programmable
coefficients. Once a PRB is selected for use by the DAC, its filter
coefficients can be configured via a dedicated set of registers.
Define a new optional firmware which can be loaded by the TLV320DAC driver.
This firmware describes a full set of filter coefficients for all blocks
used by the various PRBs.
The firmware's binary format is heavily inspired by the one used in the
peb2466 driver. It includes a version marker to allow for potential
evolutions of the format.
Note that adaptive filtering is not supported i.e. filter coefficients are
loaded once before power-on and then cannot be changed while the DAC is
powered. This is why only page A coefficients are modified. Page B
coefficients are only used for adaptive filtering.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://patch.msgid.link/20240906-tlv320-filter-v1-1-6955f53ff435@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fix to save the dsp bin file name into the correct array, coef_binaryname,
instead of rca_binaryname, in case name_prefix is not NULL.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240907001540.944-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tee_shm_get_va() function never returns NULL, it returns error
pointers. Update the check to match.
Fixes: f0c8431568 ("optee: probe RPMB device using RPMB subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/f8c12aed-b5d1-4522-bf95-622b8569706d@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Until VM_DONTEXPAND was added in commit 1c1914d6e8 ("dma-buf: heaps:
Don't track CMA dma-buf pages under RssFile") it was possible to obtain
a mapping larger than the buffer size via mremap and bypass the overflow
check in dma_buf_mmap_internal. When using such a mapping to attempt to
fault past the end of the buffer, the CMA heap fault handler also checks
the fault offset against the buffer size, but gets the boundary wrong by
1. Fix the boundary check so that we don't read off the end of the pages
array and insert an arbitrary page in the mapping.
Reported-by: Xingyu Jin <xingyuj@google.com>
Fixes: a5d2d29e24 ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation")
Cc: stable@vger.kernel.org # Applicable >= 5.10. Needs adjustments only for 5.10.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830192627.2546033-1-tjmercier@google.com
Store the cookie to detect concurrent seeks on directories in
file->private_data.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-11-6d3e4816aa7b@kernel.org
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This is similar to generic_file_llseek() but allows the caller to
specify a cookie that will be updated to indicate that a seek happened.
Caller's requiring that information in their readdir implementations can
use that.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-8-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Make generic_file_llseek_size() use must_set_pos(). We'll use
must_set_pos() in another helper in a minutes. Remove __maybe_unused
from must_set_pos() now that it's used.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-7-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new must_set_pos() helper. We will use it in follow-up patches.
Temporarily mark it as unused. This is only done to keep the diff small
and reviewable.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-6-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Macronix serial NAND flash with a two-plane structure requires
insertion of the Plane Select bit into the column address during
the write_to_cache operation.
Additionally, for MX35{U,F}2G14AC and MX35LF2GE4AB, insertion of
the Plane Select bit into the column address is required during
the read_from_cache operation.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240909092643.2434479-3-linchengming884@gmail.com
Add two flags for inserting the Plane Select bit into the column
address during the write_to_cache and the read_from_cache operation.
Add the SPINAND_HAS_PROG_PLANE_SELECT_BIT flag for serial NAND flash
that require inserting the Plane Select bit into the column address
during the write_to_cache operation.
Add the SPINAND_HAS_READ_PLANE_SELECT_BIT flag for serial NAND flash
that require inserting the Plane Select bit into the column address
during the read_from_cache operation.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240909092643.2434479-2-linchengming884@gmail.com
Allow fixed-partitions to be specified through a partitions
node.
Fixes the below dtbs_check warning:
arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtb: nand@0,0: Unevaluated properties are not allowed ('partitions' was unexpected)
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240903-gpmc-dtb-v2-1-8046c1915b96@kernel.org
Reviewing a series converting the for_each_chil_of_node() loops into
their _scoped variants made me realize there was no cleanup of the
already registered NAND devices upon error which may leak memory on
systems with more than a chip when this error occurs. We should call the
_nand_chips_cleanup() function when this happens.
Fixes: 1d6b1e4649 ("mtd: mediatek: driver for MTK Smart Device")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20240826153019.67106-2-miquel.raynal@bootlin.com
Since '__dev_queue_xmit()' should be called with interrupts enabled,
the following backtrace:
ieee80211_do_stop()
...
spin_lock_irqsave(&local->queue_stop_reason_lock, flags)
...
ieee80211_free_txskb()
ieee80211_report_used_skb()
ieee80211_report_ack_skb()
cfg80211_mgmt_tx_status_ext()
nl80211_frame_tx_status()
genlmsg_multicast_netns()
genlmsg_multicast_netns_filtered()
nlmsg_multicast_filtered()
netlink_broadcast_filtered()
do_one_broadcast()
netlink_broadcast_deliver()
__netlink_sendskb()
netlink_deliver_tap()
__netlink_deliver_tap_skb()
dev_queue_xmit()
__dev_queue_xmit() ; with IRQS disabled
...
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags)
issues the warning (as reported by syzbot reproducer):
WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120
Fix this by implementing a two-phase skb reclamation in
'ieee80211_do_stop()', where actual work is performed
outside of a section with interrupts disabled.
Fixes: 5061b0c2b9 ("mac80211: cooperate more with network namespaces")
Reported-by: syzbot+1a3986bbd3169c307819@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240906123151.351647-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit e7cd191f83.
While supporting xfrm interfaces in the packet offload API
is needed, this patch does not do the right thing. There are
more things to do to really support xfrm interfaces, so revert
it for now.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Although not reproduced in practice, these two cases may be
considered by UBSAN as off-by-one errors. So fix them in the
same way as in commit a26a5107bc ("wifi: cfg80211: fix UBSAN
noise in cfg80211_wext_siwscan()").
Fixes: 807f8a8c30 ("cfg80211/nl80211: add support for scheduled scans")
Fixes: 5ba63533bb ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240909090806.1091956-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Device class has two namespace relevant fields which are associated by
the following usage:
struct class {
...
const struct kobj_ns_type_operations *ns_type;
const void *(*namespace)(const struct device *dev);
...
}
if (dev->class && dev->class->ns_type)
dev->class->namespace(dev);
The usage looks weird since it checks @ns_type but calls namespace()
it is found for all existing class definitions that the other filed is
also assigned once one is assigned in current kernel tree, so fix this
weird usage by checking @namespace to call namespace().
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier says:
====================
net: ethernet: fs_enet: Cleanup and phylink conversion
This is V3 of a series that cleans-up fs_enet, with the ultimate goal of
converting it to phylink (patch 8).
The main changes compared to V2 are :
- Reviewed-by tags from Andrew were gathered
- Patch 5 now includes the removal of now unused includes, thanks
Andrew for spotting this
- Patch 4 is new, it reworks the adjust_link to move the spinlock
acquisition to a more suitable location. Although this dissapears in
the actual phylink port, it makes the phylink conversion clearer on
that point
- Patch 8 includes fixes in the tx_timeout cancellation, to prevent
taking rtnl twice when canceling a pending tx_timeout. Thanks Jakub
for spotting this.
Link to V2: https://lore.kernel.org/netdev/20240829161531.610874-1-maxime.chevallier@bootlin.com/
Link to V1: https://lore.kernel.org/netdev/20240828095103.132625-1-maxime.chevallier@bootlin.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
fs_enet is a quite old but still used Ethernet driver found on some NXP
devices. It has support for 10/100 Mbps ethernet, with half and full
duplex. Some variants of it can use RMII, while other integrations are
MII-only.
Add phylink support, thus removing custom fixed-link hanldling.
This also allows removing some internal flags such as the use_rmii flag.
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devm_clock_get_enabled() can be used to simplify clock handling for the
PER register clock.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PHY speed and duplex should be manipulated using the SPEED_XXX and
DUPLEX_XXX macros available. Use it in the fcc, fec and scc MAC for
fs_enet.
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no user of the struct phy_info, the 'phy' field and the
mii_if_info in the fs_enet driver, probably dating back when phylib
wasn't as widely used. Drop these from the driver code.
As the definition for struct mii_if_info is no longer required, drop the
include for linux/mii.h altogether in the driver.
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When .adjust_link() gets called, it runs in thread context, with the
phydev->lock held. We only need to protect the fep->fecp/fccp/sccp
register that are accessed within the .restart() function from
concurrent access from the interrupts.
These registers are being protected by the fep->lock spinlock, so we can
move the spinlock protection around the .restart() call instead of the
entire adjust_link() call. By doing so, we can simplify further the
.adjust_link() callback and avoid the intermediate helper.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no in-tree user for the fs_ops .adjust_link() function, so we
can always use the generic one in fe_enet-main.
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the age of the driver and the slow recent activity on it, the code
has taken some layers of dust. Clean the main driver file up so that it
passes checkpatch and also conforms with the net coding style.
Changes include :
- Re-ordering of the variable declarations for RCT
- Fixing the comment styles to either one-line comments, or net-style
comments
- Adding braces around single-statement 'else' clauses
- Aligning function/macro parameters on the opening parenthesis
- Simplifying checks for NULL pointers
- Splitting cascaded assignments into individual assignments
- Fixing some typos
- Fixing whitespace issues
This is a cosmetic change and doesn't introduce any change in behaviour.
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ENET driver has SPDX tags in the header files, but they were missing
in the C files. Change the licence information to SPDX format.
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There cannot be brackets in kernel-doc, remove them.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 62c16f219a ("wifi: cfg80211: move DFS related members to links[] in wireless_dev")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* ras/edac-amd-atl:
RAS/AMD/ATL: Translate normalized to system physical addresses using PRM
ACPI: PRM: Add PRM handler direct call support
* ras/edac-misc:
EDAC/synopsys: Fix error injection on Zynq UltraScale+
* ras/edac-drivers:
EDAC: Drop obsolete PPC4xx driver
EDAC/sb_edac: Fix the compile warning of large frame size
EDAC/{skx_common,i10nm}: Remove the AMAP register for determing DDR5
EDAC/{skx_common,skx,i10nm}: Move the common debug code to skx_common
EDAC/igen6: Fix conversion of system address to physical memory address
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>