Commit graph

1,309,764 commits

Author SHA1 Message Date
Heiner Kallweit
7e722083fc i2c: Remove I2C_COMPAT config symbol and related code
This code was added with 2bb5095aff ("i2c: Provide compatibility links
for i2c adapters"). Commit message stated: Provide compatibility links
for [...] the time being. We will remove them after a long transition
period.
15 years should have been a long enough transition period.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2024-09-07 18:31:28 +02:00
Heiko Carstens
5c9a274202 s390/boot: Move boot_printk() code to own file
Keep the printk code separate from the program check code and move
boot_printk() and helper functions to own printk.c file.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-07 17:12:43 +02:00
Heiko Carstens
dc71555507 s390/boot: Use boot_printk() instead of sclp_early_printk()
Consistently use boot_printk() everywhere instead of sclp_early_printk() at
some places. For some places it was required (e.g. als.c), in order to stay
in code compiled for the same architecture level, for other places it is
not obvious why sclp_early_printk() was used instead of
decompressor_printk().

Given that the whole decompressor code is compiled for the same
architecture level, there is no requirement left to use different
printk functions.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-07 17:12:43 +02:00
Heiko Carstens
bfda610814 s390/boot: Rename decompressor_printk() to boot_printk()
Rename decompressor_printk() to boot_printk() just to have a shorter
function name, which also makes the code more readable.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-07 17:12:42 +02:00
Heiko Carstens
fccb175bc8 s390/boot: Compile all files with the same march flag
Only a couple of files of the decompressor are compiled with the
minimum architecture level. This is problematic for potential function
calls between compile units, especially if a target function is within
a compile until compiled for a higher architecture level, since that
may lead to an unexpected operation exception.

Therefore compile all files of the decompressor for the same (minimum)
architecture level.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-07 17:12:42 +02:00
Heiko Carstens
ebcc369f18 s390: Use MARCH_HAS_*_FEATURES defines
Replace CONFIG_HAVE_MARCH_*_FEATURES with MARCH_HAS_*_FEATURES
everywhere so code gets compiled correctly depending on if the
target is the kernel or the decompressor.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-07 17:12:42 +02:00
Heiko Carstens
697b37371f s390: Provide MARCH_HAS_*_FEATURES defines
Provide MARCH_HAS_*_FEATURES defines which are supposed to be used
everywhere instead of the CONFIG_HAVE_MARCH_*_FEATURES defines.

Various header files contain code which depend on the
CONFIG_HAVE_MARCH_*_FEATURES defines, allowing for compile time
optimizations. If such code is used within the decompressor wrong code may
be generated (the compiler may generate instructions which are not
available for the minimum architecture level of the decompressor).

Therefore provide a new header file with MARCH_HAS_*_FEATURES defines,
which are only available if __DECOMPRESSOR is not defined. This way code
generation for the kernel image is still optimized depending on
CONFIG_HAVE_MARCH_*_FEATURES, while code generated for the decompressor is
compiled for the minimum architecture level.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-07 17:12:42 +02:00
Heiko Carstens
0147addc4f s390/facility: Disable compile time optimization for decompressor code
Disable compile time optimizations of test_facility() for the
decompressor. The decompressor should not contain any optimized code
depending on the architecture level set the kernel image is compiled
for to avoid unexpected operation exceptions.

Add a __DECOMPRESSOR check to test_facility() to enforce that
facilities are always checked during runtime for the decompressor.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-07 17:12:42 +02:00
Heiko Carstens
db545f5387 s390/boot: Increase minimum architecture to z10
The decompressor code is partially compiled with march=z900 so it is
possible to print an error message in case a kernel is booted on a
machine which misses facilities to execute the kernel.

Given that the decompressor code also includes header files from the
core kernel this causes problems for inline assemblies and other code
where the minimum assumed architecture level is set to z10 in the
meantime. If such code is also used in the decompressor (e.g. inline
functions) z900 support must be implemented again.

In order to avoid this and to keep things simple just raise the
minimum architecture level to z10 for the decompressor just like for
the kernel.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-07 17:12:42 +02:00
Heiko Carstens
6fa7aea6a9 s390/als: Remove obsolete comment
The bss section of the decompressor is part of the compressed kernel image
since commit 980d5f9ab3 ("s390/boot: enable .bss section for compressed
kernel").

Remove a now incorrect comment that states that the bss section must not be
accessed.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-07 17:12:41 +02:00
Keith Busch
acc8c0a988 blk-mq: add missing unplug trace event
The single-queue optimized list flush doesn't have an unplug trace event
to pair with the plug event. Add one.

In the unlikely event an error occurs and falls back to the less
optimized plug flush path, it's possible a 2nd unplug trace event will
be logged, but it will show the remainig count that weren't previously
handled.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240906194540.3719642-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-07 07:41:12 -06:00
Li Zetao
a02e98bebc mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
Since the debugfs_create_dir() never returns a null pointer, checking
the return value for a null pointer is redundant. Since
debugfs_create_file() can deal with a ERR_PTR() style pointer, drop
the check.  Since mtip_hw_debugfs_init does not pay attention to the
return value, its return type can be changed to void.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20240907034046.3595268-1-lizetao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-07 07:40:49 -06:00
Chris Morgan
5ba0cb9258 iio: adc: axp20x_adc: add support for AXP717 ADC
Add support for the AXP717 ADC. The AXP717 differs from other ADCs
in this series by utilizing a 14 bit ADC for all channels (a full 16
bits with the first 2 digits reserved). It also differs by lacking a
battery discharge current channel.

Note that while the current charge channel itself is included in this
driver for the AXP717 and listed in the datasheet, no scale or offset
was given for this channel. For now no scale or offset is provided in
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20240821215456.962564-13-macroalpha82@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-07 14:28:37 +01:00
Chris Morgan
85d3af3e9f dt-bindings: iio: adc: Add AXP717 compatible
Add compatible binding for the axp717.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20240821215456.962564-9-macroalpha82@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-07 14:28:12 +01:00
Chris Morgan
c7ac44751d iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
Add the register for adc_en1 and adc_en2 to the axp_data struct. This
allows us to specify a different register to enable the adc channels
for different devices such as the AXP717.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240821215456.962564-2-macroalpha82@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-07 14:27:32 +01:00
Jonathan Cameron
d1360cc7ff Merge remote-tracking branch 'mfd/ib-mfd-for-iio-power-6.12' into togreg 2024-09-07 14:26:34 +01:00
Jerome Brunet
b12891c7b6 ALSA: IEC958 definition for consumer status channel update
Add 128kHz, 352.4kHz, 384kHz and 705.6kHz.
These definitions have been found working on eARC using a Murideo
Seven Generator.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240906093422.2976550-1-jbrunet@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-09-07 10:42:17 +02:00
Takashi Iwai
63e38d0787 ALSA: hda: Allow the default preallocation for x86 again
Since there are a few corner cases where the S/G buffer allocation
isn't performed (e.g. depending on IOMMU implementations), it'd be
better to allow the default buffer preallocation size for x86, too.

The default for x86 is still kept to 0, as it should work in most
cases.

Link: https://patch.msgid.link/20240907084129.28802-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-09-07 10:42:03 +02:00
Thomas Weißschuh
fdf94e4403 kbuild: compile constant module information only once
Various information about modules is compiled into the info sections.
For that a dedicated .mod.c file is generated by modpost for each module
and then linked into the module.
However most of the information in the .mod.c is the same for all
modules, internal and external.
Split the shared information into a dedicated source file that is
compiled once and then linked into all modules.

This avoids frequent rebuilds for all .mod.c files when using
CONFIG_LOCALVERSION_AUTO because the local version ends up in .mod.c
through UTS_RELEASE and VERMAGIC_STRING.
The modules are still relinked in this case.

The code is also easier to maintain as it's now in a proper source file
instead of an inline string literal.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-09-07 17:24:08 +09:00
Masahiro Yamada
cd615d7fcc ARC: update the help message for CONFIG_ARC_BUILTIN_DTB_NAME
Commit abe11ddea1 ("ARC: [plat-arcfpga]: Enabling DeviceTree for
Angel4 board") changed the default built-in DTB from "skeleton" to
"angel4".

Commit fd1557923b ("ARC: [plat_arcfpga]->[plat_sim]") changed it
from "angel4" to "nsim_700".

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
2024-09-07 17:24:08 +09:00
Tony Battersby
dde60e7d10 kbuild: remove recent dependency on "truncate" program
Remove the recently-added dependency on the truncate program for
building the kernel. truncate is not available when building the kernel
under Yocto. It could be added, but it would be better just to avoid
the unnecessary dependency.

Fixes: 1472464c62 ("kbuild: avoid scripts/kallsyms parsing /dev/null")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-09-07 17:24:08 +09:00
Jose Fernandez
4929f5b95f kbuild: add debug package to pacman PKGBUILD
Add a new debug package to the PKGBUILD for the pacman-pkg target. The
debug package includes the non-stripped vmlinux file with debug symbols
for kernel debugging and profiling. The file is installed at
/usr/src/debug/${pkgbase}, with a symbolic link at
/usr/lib/modules/$(uname -r)/build/vmlinux. The debug package is built
by default.

Signed-off-by: Jose Fernandez <jose.fernandez@linux.dev>
Reviewed-by: Peter Jung <ptr1337@cachyos.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-09-07 17:24:08 +09:00
Stephen Brennan
d97eae80d5 Documentation: kconfig: explicitly document missing prompt
There are a few lines in the kbuild-language.rst document which
obliquely reference the behavior of config options without prompts.
But there is nothing in the obvious location that explicitly calls
out that users cannot edit config options unless they have a prompt.

Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-09-07 17:24:01 +09:00
Dave Airlie
af04e65f6b Merge tag 'drm-msm-next-2024-09-02' of https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.12

DPU:
- Fix implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350

DP:
- Enable widebus on all relevant chipsets

DSI:
- Fix PHY programming on SM8350 / SM8450

HDMI:
- Add support for HDMI on MSM8998

MDP5:
- NULL string fix

GPU:
- A642L speedbin support
- A615 support
- A306 support
- A621 support
- Expand UBWC uapi
- A7xx GPU devcoredump fixes
- A5xx preemption fixes
- cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGudK7YMiKDhtvYgp=bY64OZZt0UQSkEkSxLo4rLmeVd9g@mail.gmail.com
2024-09-07 16:43:07 +10:00
Damien Le Moal
d647bdf4d0 ata: libata: Fix W=1 compilation warning
Commit c494708d1f ("ata: libata: Cleanup libata-transport")
inadvertently changed the name of the link argument to ata_link in the
kdoc description of ata_tlink_add(), causing warnings to be issue when
compiling with W=1:

drivers/ata/libata-transport.c:690: warning: Function parameter or
struct member 'link' not described in 'ata_tlink_add'
drivers/ata/libata-transport.c:690: warning: Excess function parameter
'ata_link' description in 'ata_tlink_add'

Change the kdoc argument name to "link" to avoid these warnings.

Fixes: c494708d1f ("ata: libata: Cleanup libata-transport")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-09-07 11:02:52 +09:00
Jakub Kicinski
f723224742 netfilter pull request 24-09-06
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmbaOvIACgkQ1V2XiooU
 IOT/oQ/+JTsIkXRn8XAOgjsbxOEOvrUPAzb72Atz/cCA0RPQkHXbdZtxLDPbcN1v
 lQG6R+ZK+trS70fIMqnfSbEB/eaCWum+/kd9ZSp5RCFW4M9OVde+KTJj+IfEzsQZ
 spZRR53VnAN5jSeI2U3w4iYnyCWn5Xtp2sGETrjh43yK3cirvo7sZd/+477gZiGp
 qBDEgZrzcDzfm8IxJCCUeJdcNeM7ytoMhuyITT9YrvUt0Qo6+qPsx5hVFwMFly/M
 WkvxCR/1DR+Unhp4a30STEPPxDR0f284WoaiuxEvNAN2yP7p7O35mcStzyfhlOh+
 wB/Cc4ESBa3fPRhA+l3FDsdyrlHsi3c8VUwBWcXVryeD5e1mzyveXye9O2HtWmET
 wBtukfdPORu8JBBHxf3kmv+ZLAJLjAwyO1G1DHFruL/yEAJIDq4gluxlR+71rg7n
 qAZUvvV3MGQMCNIO3GlQ6ODtl0UcIUTHwW5//MEaxOC/aqWN/fr/keSz8xGE2Qkt
 47TFbBiGC6UR0KD+wWGAWfOlWN4G9m7E4SG++vCkXJGio4bvyGl8TxorWsh99vCv
 BMq59ZRtsS1xiEcWF48Q0Y5YtURIdCih/LcfDdbIQFzkNlHzzGpo68MHN/anqgu/
 GE4JTdgjf79lfDqJDqdnQiio7P44NZqhkeUT8yQTE1xbIKsQRNY=
 =Uxb1
 -----END PGP SIGNATURE-----

Merge tag 'nf-next-24-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

Patch #1 adds ctnetlink support for kernel side filtering for
	 deletions, from Changliang Wu.

Patch #2 updates nft_counter support to Use u64_stats_t,
	 from Sebastian Andrzej Siewior.

Patch #3 uses kmemdup_array() in all xtables frontends,
	 from Yan Zhen.

Patch #4 is a oneliner to use ERR_CAST() in nf_conntrack instead
	 opencoded casting, from Shen Lichuan.

Patch #5 removes unused argument in nftables .validate interface,
	 from Florian Westphal.

Patch #6 is a oneliner to correct a typo in nftables kdoc,
	 from Simon Horman.

Patch #7 fixes missing kdoc in nftables, also from Simon.

Patch #8 updates nftables to handle timeout less than CONFIG_HZ.

Patch #9 rejects element expiration if timeout is zero,
	 otherwise it is silently ignored.

Patch #10 disallows element expiration larger than timeout.

Patch #11 removes unnecessary READ_ONCE annotation while mutex is held.

Patch #12 adds missing READ_ONCE/WRITE_ONCE annotation in dynset.

Patch #13 annotates data-races around element expiration.

Patch #14 allocates timeout and expiration in one single set element
	  extension, they are tighly couple, no reason to keep them
	  separated anymore.

Patch #15 updates nftables to interpret zero timeout element as never
	  times out. Note that it is already possible to declare sets
	  with elements that never time out but this generalizes to all
	  kind of set with timeouts.

Patch #16 supports for element timeout and expiration updates.

* tag 'nf-next-24-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: nf_tables: set element timeout update support
  netfilter: nf_tables: zero timeout means element never times out
  netfilter: nf_tables: consolidate timeout extension for elements
  netfilter: nf_tables: annotate data-races around element expiration
  netfilter: nft_dynset: annotate data-races around set timeout
  netfilter: nf_tables: remove annotation to access set timeout while holding lock
  netfilter: nf_tables: reject expiration higher than timeout
  netfilter: nf_tables: reject element expiration with no timeout
  netfilter: nf_tables: elements with timeout below CONFIG_HZ never expire
  netfilter: nf_tables: Add missing Kernel doc
  netfilter: nf_tables: Correct spelling in nf_tables.h
  netfilter: nf_tables: drop unused 3rd argument from validate callback ops
  netfilter: conntrack: Convert to use ERR_CAST()
  netfilter: Use kmemdup_array instead of kmemdup for multiple allocation
  netfilter: nft_counter: Use u64_stats_t for statistic.
  netfilter: ctnetlink: support CTA_FILTER for flush
====================

Link: https://patch.msgid.link/20240905232920.5481-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:39:31 -07:00
Vadim Fedorenko
aa05fe67bc ptp: ocp: Improve PCIe delay estimation
The PCIe bus can be pretty busy during boot and probe function can
see excessive delays. Let's find the minimal value out of several
tests and use it as estimated value.

Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20240905140028.560454-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:28:07 -07:00
Eric Dumazet
9a95eedc81 netpoll: remove netpoll_srcu
netpoll_srcu is currently used from netpoll_poll_disable() and
__netpoll_cleanup()

Both functions run under RTNL, using netpoll_srcu adds confusion
and no additional protection.

Moreover the synchronize_srcu() call in __netpoll_cleanup() is
performed before clearing np->dev->npinfo, which violates RCU rules.

After this patch, netpoll_poll_disable() and netpoll_poll_enable()
simply use rtnl_dereference().

This saves a big chunk of memory (more than 192KB on platforms
with 512 cpus)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240905084909.2082486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:24:59 -07:00
Jakub Kicinski
c6a1739778 Merge branch 'octeontx2-address-some-warnings'
Simon Horman says:

====================
octeontx2: Address some warnings

This patchset addresses some warnings flagged by Sparse, gcc-14, and
clang-18 in files touched by recent patch submissions.

Although these changes do not alter the functionality of the code, by
addressing them real problems introduced in future which are flagged by
Sparse will stand out more readily.

v1: https://lore.kernel.org/20240903-octeontx2-sparse-v1-0-f190309ecb0a@kernel.org
====================

Link: https://patch.msgid.link/20240904-octeontx2-sparse-v2-0-14f2305fe4b2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:23:52 -07:00
Simon Horman
7baa90c616 octeontx2-pf: Make iplen __be16 in otx2_sqe_add_ext()
In otx2_sqe_add_ext() iplen is used to hold a 16-bit big-endian value,
but it's type is u16, indicating a host byte order integer.

Address this mismatch by changing the type of iplen to __be16.

Flagged by Sparse as:

.../otx2_txrx.c:699:31: warning: incorrect type in assignment (different base types)
.../otx2_txrx.c:699:31:    expected unsigned short [usertype] iplen
.../otx2_txrx.c:699:31:    got restricted __be16 [usertype]
.../otx2_txrx.c:701:54: warning: incorrect type in assignment (different base types)
.../otx2_txrx.c:701:54:    expected restricted __be16 [usertype] tot_len
.../otx2_txrx.c:701:54:    got unsigned short [usertype] iplen
.../otx2_txrx.c:704:60: warning: incorrect type in assignment (different base types)
.../otx2_txrx.c:704:60:    expected restricted __be16 [usertype] payload_len
.../otx2_txrx.c:704:60:    got unsigned short [usertype] iplen

Introduced in
commit dc1a9bf2c8 ("octeontx2-pf: Add UDP segmentation offload support")

No functional change intended.
Compile tested only by author.

Tested-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904-octeontx2-sparse-v2-2-14f2305fe4b2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:23:50 -07:00
Simon Horman
92218f108f octeontx2-af: Pass string literal as format argument of alloc_workqueue()
Recently I noticed that both gcc-14 and clang-18 report that passing
a non-string literal as the format argument of alloc_workqueue()
is potentially insecure.

E.g. clang-18 says:

.../rvu.c:2493:32: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
 2493 |         mw->mbox_wq = alloc_workqueue(name,
      |                                       ^~~~
.../rvu.c:2493:32: note: treat the string as an argument to avoid this
 2493 |         mw->mbox_wq = alloc_workqueue(name,
      |                                       ^
      |                                       "%s",

It is always the case where the contents of name is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.

But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.

Compile tested only by author.

Tested-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904-octeontx2-sparse-v2-1-14f2305fe4b2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:23:49 -07:00
Rosen Penev
cca0d69baf net: phy: qca83xx: use PHY_ID_MATCH_EXACT
No need for the mask when there's already a macro for this.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240904205659.7470-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:23:08 -07:00
Edward Cree
32b81e4f0e sfc: siena: rip out rss-context dead code
Siena hardware does not support custom RSS contexts, but when the
 driver was forked from sfc.ko, some of the plumbing for them was
 copied across from the common code.  Actually trying to use them
 would lead to EOPNOTSUPP as the relevant efx_nic_type methods were
 not populated.
Remove this dead code from the Siena driver.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904181156.1993666-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:22:17 -07:00
Jakub Kicinski
5953711258 Merge branch 'use-functionality-of-irq_get_trigger_type'
Vasileios Amoiridis says:

====================
Use functionality of irq_get_trigger_type()

v1: https://lore.kernel.org/20240902225534.130383-1-vassilisamir@gmail.com
====================

Link: https://patch.msgid.link/20240904151018.71967-1-vassilisamir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:21:47 -07:00
Vasileios Amoiridis
f4bbf496f5 net: smc91x: Make use of irq_get_trigger_type()
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Link: https://patch.msgid.link/20240904151018.71967-4-vassilisamir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:21:43 -07:00
Vasileios Amoiridis
36a5faec56 net: dsa: realtek: rtl8366rb: Make use of irq_get_trigger_type()
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).

Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240904151018.71967-3-vassilisamir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:21:43 -07:00
Vasileios Amoiridis
517c292475 net: dsa: realtek: rtl8365mb: Make use of irq_get_trigger_type()
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Link: https://patch.msgid.link/20240904151018.71967-2-vassilisamir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:21:43 -07:00
Sascha Hauer
54001d0f2f net: tls: wait for async completion on last message
When asynchronous encryption is used KTLS sends out the final data at
proto->close time. This becomes problematic when the task calling
close() receives a signal. In this case it can happen that
tcp_sendmsg_locked() called at close time returns -ERESTARTSYS and the
final data is not sent.

The described situation happens when KTLS is used in conjunction with
io_uring, as io_uring uses task_work_add() to add work to the current
userspace task. A discussion of the problem along with a reproducer can
be found in [1] and [2]

Fix this by waiting for the asynchronous encryption to be completed on
the final message. With this there is no data left to be sent at close
time.

[1] https://lore.kernel.org/all/20231010141932.GD3114228@pengutronix.de/
[2] https://lore.kernel.org/all/20240315100159.3898944-1-s.hauer@pengutronix.de/

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20240904-ktls-wait-async-v1-1-a62892833110@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:20:55 -07:00
Damien Le Moal
602bcf2126 ata: libata: Improve CDL resource management
The ncq_sense_buf buffer field of struct ata_port is allocated and used
only for devices that support the Command Duration Limits (CDL) feature.
However, the cdl buffer of struct ata_device, which is used to cache the
command duration limits log page for devices supporting CDL is always
allocated as part of struct ata_device, which is wasteful of memory for
devices that do not support this feature.

Clean this up by defining both buffers as part of the new ata_cdl
structure and allocating this structure only for devices that support
the CDL feature. This new structure is attached to struct ata_device
using the cdl pointer.

The functions ata_dev_init_cdl_resources() and
ata_dev_cleanup_cdl_resources() are defined to manage this new structure
allocation, initialization and freeing when a port is removed or a
device disabled. ata_dev_init_cdl_resources() is called from
ata_dev_config_cdl() only for devices that support CDL.
ata_dev_cleanup_cdl_resources() is called from ata_dev_free_resources()
to free the ata_cdl structure when a device is being disabled by EH.

Note that the name of the former cdl log buffer of struct ata_device is
changed to desc_log_buf to make it clearer that it is a buffer for the
limit descriptors log page.

This change reduces the size of struct ata_device, thus reducing memory
usage for ATA devices that do not support the CDL feature.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-09-07 10:16:56 +09:00
Damien Le Moal
5f8319c4b3 ata: libata: Introduce ata_dev_free_resources
Introduce the function ata_dev_free_resources() to free the resources
allocated to support a device features. For now, this function is
reduced to calling zpodd_exit() for devices that have this feature
enabled.

ata_dev_free_resources() is called from ata_eh_dev_disable() as this
function is always called for all devices attached to a port that is
being detached and for devices that are being disabled due to being
removed (detached) from the system or due to errors.

With this change, the call to zpodd_exit() done in ata_port_detach()
and ata_scsi_handle_link_detach() are removed as these functions
remove all devices attached to the link or port using libata EH, thus
resulting in ata_eh_dev_disable() being called and the zpodd_exit()
function being executed.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-09-07 10:16:55 +09:00
Damien Le Moal
da65bbdd3b ata: libata: Move sector_buf from struct ata_port to struct ata_device
The 512B buffer sector_buf field of struct ata_port is used for scanning
devices as well as during error recovery with ata EH. This buffer is
thus useless if a port does not have a device connected to it.
And also given that commands using this buffer are issued to devices,
and not to ports, move this buffer definition from struct ata_port to
struct ata_device.

This change slightly increases system memory usage for systems using a
port-multiplier as in that case we do not need a per-device buffer for
scanning devices (PMP does not allow parallel scanning) nor for EH (as
when entering EH we are guaranteed that all commands to all devices
connected to the PMP have completed or have been aborted). However,
this change reduces memory usage on systems that have many ports with
only few devices rives connected, which is a much more common use case
than the PMP use case.

Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-09-07 10:16:55 +09:00
Damien Le Moal
10e807637f ata: libata: Rename ata_eh_read_sense_success_ncq_log()
The function ata_eh_read_sense_success_ncq_log() does more that just
reading the sense data for successful NCQ commands log page as it also
sets the sense data for all commands listed in the log page.

Rename this function to ata_eh_get_ncq_success_sense() to better
describe what the function does. Furthermore, since this function is
only called from ata_eh_get_success_sense() in libata-eh.c, there is no
need to export it and its declaration can be moved to
drivers/ata/libata.h.

To be consistent with this change, the function
ata_eh_read_sense_success_non_ncq() is also renamed to
ata_eh_get_non_ncq_success_sense().

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2024-09-07 10:16:55 +09:00
Damien Le Moal
78f76b09c9 ata: libata: Move sata_std_hardreset() definition to libata-sata.c
Unlike ata_std_prereset() and ata_std_postreset(), the function
sata_std_hardreset() applies only to SATA devices, as its name implies.
So move its definition to libata-sata.c.

Together with this, also move the definition of sata_port_ops to
libata-sata.c, where it belongs.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2024-09-07 10:16:55 +09:00
Damien Le Moal
b642212d88 ata: libata: Move sata_down_spd_limit() to libata-sata.c
Move the definition of the function sata_down_spd_limit() to
libata-sata.c where it belongs, together with sata_set_spd().
The helper function ata_sstatus_online() is also changed to be an
inline function defined in drivers/ata/libata.h.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2024-09-07 10:16:55 +09:00
Damien Le Moal
5bb52d9265 ata: libata: Improve __ata_qc_complete()
The function __ata_qc_complete() is always called with a qc that already
has been dereferenced and so is guaranteed to be non-NULL (as otherwise
the kernel would have crashed). So remove the warning for a NULL qc as
it is useless.

Furthermore, the qc passed to __ata_qc_complete() must always be marked
as active with the ATA_QCFLAG_ACTIVE flag. If that is not the case, in
addition to the existing warning, return early so that we do not attempt
to complete an invalid qc.

Finally, fix the comment related to clearing the qc active flag as that
operation applies to all devices, not just ATAPI ones.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2024-09-07 10:16:55 +09:00
Damien Le Moal
a16951510f ata: libata-scsi: Improve ata_scsi_handle_link_detach()
A struct ata_device flags should always be set and cleared with the
device port locked. Testing for a flag should thus also be done while
holding the device port lock. In accordance to this principle, modify
ata_scsi_handle_link_detach() to test and clear the ATA_DFLAG_DETACHED
flag while holding the device port lock.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-09-07 10:16:55 +09:00
Damien Le Moal
c494708d1f ata: libata: Cleanup libata-transport
Move the ATA link transport device related functions after the ATA
transport device related functions to avoid the need for forward
declaring ata_tdev_add() and ata_tdev_delete().

And while at it, do the following:
1) Change ata_is_ata_dev() and ata_is_link() to return a boolean
2) Fix a pointer declaration style in ata_is_ata_dev()
3) Improve the kdoc comments for ata_tdev_free(), ata_tdev_delete(),
   ata_tdev_add(), ata_tlink_delete() and ata_tlink_add()

No functional changes are introduced by this cleanup.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-09-07 10:16:55 +09:00
Jakub Kicinski
7ab50d5e88 Merge branch 'make-use-of-the-helper-macro-list_head'
Hongbo Li says:

====================
make use of the helper macro LIST_HEAD()

The macro LIST_HEAD() declares a list variable and
initializes it, which can be used to simplify the steps
of list initialization, thereby simplifying the code.
These serials just do some equivalatent substitutions,
and with no functional modifications.
====================

Link: https://patch.msgid.link/20240904093243.3345012-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:10:26 -07:00
Hongbo Li
17f0139190 net/core: make use of the helper macro LIST_HEAD()
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD(). Here we can simplify
the code.

Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240904093243.3345012-6-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:10:22 -07:00
Hongbo Li
2a7dd251b6 net/ipv6: make use of the helper macro LIST_HEAD()
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD(). Here we can simplify
the code.

Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240904093243.3345012-5-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06 18:10:21 -07:00