When dw_pcie_iatu_setup() configures outbound address translation for both
type PCIE_ATU_TYPE_MEM and PCIE_ATU_TYPE_IO, the iATU index to use is
incremented before calling dw_pcie_prog_outbound_atu().
However for msg_atu_index, the index is not incremented before use,
causing the iATU index to be the same as the last configured iATU index,
which means that it will incorrectly use the same iATU index that is
already in use, breaking outbound address translation.
In total there are three problems with this code:
-It assigns msg_atu_index the same index that was used for the last
outbound address translation window, rather than incrementing the index
before assignment.
-The index should only be incremented (and msg_atu_index assigned) if the
use_atu_msg feature is actually requested/in use (pp->use_atu_msg is set).
-If the use_atu_msg feature is requested/in use, and there are no outbound
iATUs available, the code should return an error, as otherwise when this
this feature is used, it will use an iATU index that is out of bounds.
Fixes: e1a4ec1a95 ("PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260127151038.1484881-6-cassel@kernel.org
PCIe r6.0, section 7.9.15 requires PTM capability in exactly one
function to control all PTM-capable functions. This makes PTM registers
controller level rather than per-function.
Add a comment explaining why PTM capability registers are accessed
using the standard DBI accessors instead of func_no indexed
per-function accessors.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260130115516.515082-4-a-garg7@ti.com
The commit 24ede430fa ("PCI: designware-ep: Add multiple PFs support
for DWC") added support for multiple PFs in the DWC driver, but the
implementation was incomplete. It did not properly support MSI/MSI-X,
as well as BAR and inbound ATU mapping for multiple PFs. The MSI/MSI-X
issue was later fixed by commit 47a062609a ("PCI: designware-ep:
Modify MSI and MSIX CAP way of finding") by introducing a per-PF
struct dw_pcie_ep_func.
However, even with both commits, the multiple PF support in the driver
remains broken because BAR configuration and ATU mappings are managed
globally in struct dw_pcie_ep, meaning all PFs share the same BAR-to-ATU
mapping table. This causes one PF's EPF to overwrite the address
translation of another PF's EPF in the internal ATU region,
creating conflicts when multiple physical functions attempt to
configure their BARs independently.
The commit cfbc98dbf44d ("PCI: dwc: ep: Support BAR subrange inbound
mapping via Address Match Mode iATU") later introduced Address Match
Mode support, which suffers from the same multi-PF conflict issue.
Fix this by moving the required members from struct dw_pcie_ep to
struct dw_pcie_ep_func, similar to what commit 47a062609a
("PCI: designware-ep: Modify MSI and MSIX CAP way of finding") did for
MSI/MSI-X capability support, to allow proper multi-function endpoint
operation, where each PF can configure its BARs and corresponding
internal ATU region without interfering with other PFs.
Fixes: 24ede430fa ("PCI: designware-ep: Add multiple PFs support for DWC")
Fixes: cc839bef77 ("PCI: dwc: ep: Support BAR subrange inbound mapping via Address Match Mode iATU")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260130115516.515082-3-a-garg7@ti.com
The resizable BAR support added by the commit 3a3d4cabe6 ("PCI: dwc: ep:
Allow EPF drivers to configure the size of Resizable BARs") incorrectly
configures the resizable BARs only for the first Physical Function (PF0)
in EP mode.
The resizable BAR configuration functions use generic dw_pcie_*_dbi()
operations instead of physical function specific dw_pcie_ep_*_dbi()
operations. This causes resizable BAR configuration to always target
PF0 regardless of the requested function number.
Additionally, dw_pcie_ep_init_non_sticky_registers() only initializes
resizable BAR registers for PF0, leaving other PFs unconfigured during
the execution of this function.
Fix this by using physical function specific configuration space access
operations throughout the resizable BAR code path and initializing
registers for all the physical functions that support resizable BARs.
Fixes: 3a3d4cabe6 ("PCI: dwc: ep: Allow EPF drivers to configure the size of Resizable BARs")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
[mani: added stable tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260130115516.515082-2-a-garg7@ti.com
Add bar{0,1,2,3,4,5}_size attributes in configfs, so that the user is not
restricted to run pci-epf-test with the hardcoded BAR size values defined
in pci-epf-test.c.
This code is shamelessly more or less copy pasted from pci-epf-vntb.c
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260130113038.2143947-2-cassel@kernel.org
Add BAR_SUBRANGE_TEST to the pci_endpoint kselftest suite.
The test uses the PCITEST_BAR_SUBRANGE ioctl and will skip when the
chosen BAR is disabled (-ENODATA), when the endpoint/controller does not
support subrange mapping (-EOPNOTSUPP), or when the BAR is reserved for
the test register space (-EBUSY).
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260124145012.2794108-9-den@valinux.co.jp
Add a new PCITEST_BAR_SUBRANGE ioctl to exercise EPC BAR subrange
mapping end-to-end.
The test programs a simple 2-subrange layout on the endpoint (via
pci-epf-test) and verifies that:
- the endpoint-provided per-subrange signature bytes are observed at
the expected PCIe BAR offsets, and
- writes to each subrange are routed to the correct backing region
(i.e. the submap order is applied rather than accidentally working
due to an identity mapping).
Return -EOPNOTSUPP when the endpoint does not advertise subrange
mapping, -ENODATA when the BAR is disabled, and -EBUSY when the BAR is
reserved for the test register space.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260124145012.2794108-8-den@valinux.co.jp
Extend pci-epf-test so that pci_endpoint_test can exercise BAR subrange
mapping end-to-end.
Add BAR_SUBRANGE_SETUP/CLEAR commands that program (and tear down) a
simple 2-subrange layout for a selected BAR. The endpoint deliberately
permutes the physical backing regions (swap the halves) and writes a
deterministic signature byte per subrange. This allows the RC to verify
that the submap order is actually applied, not just that reads/writes
work with an identity mapping.
Advertise CAP_SUBRANGE_MAPPING only when the underlying EPC supports
dynamic_inbound_mapping and subrange_mapping. Also bump the default BAR
sizes (BAR0-4) to 128 KiB so that split subranges are large enough to
satisfy common inbound-translation alignment constraints. E.g. for DWC
EP, the default and maximum CX_ATU_MIN_REGION_SIZE is 64 kB, so 128 KiB
is sufficient for DWC-based EP platforms for 2-subrange testing.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260124145012.2794108-7-den@valinux.co.jp
The current documentation implies that pci_epc_set_bar() is only used
before the host enumerates the endpoint.
In practice, some Endpoint Controllers support calling pci_epc_set_bar()
multiple times for the same BAR (without clearing it) in order to update
inbound address translations after the host has programmed the BAR base
address, which some Endpoint Functions such as vNTB already rely on.
Add document text for that.
Also document the expected call flow for BAR subrange mapping
(pci_epf_bar.num_submap / pci_epf_bar.submap), which may require a
second pci_epc_set_bar() call after the host has programmed the BAR base
address.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260124145012.2794108-6-den@valinux.co.jp
Extend dw_pcie_ep_set_bar() to support inbound mappings for BAR
subranges using Address Match Mode IB iATU when pci_epf_bar.num_submap
is non-zero.
Rename the existing BAR-match helper into dw_pcie_ep_ib_atu_bar() and
introduce dw_pcie_ep_ib_atu_addr() for Address Match Mode. When
num_submap is non-zero, read the assigned BAR base address and program
one inbound iATU window per subrange. Validate the submap array before
programming:
- each subrange is aligned to pci->region_align
- subranges cover the whole BAR (no gaps and no overlaps)
Track Address Match Mode mappings and tear them down on clear_bar() and
on set_bar() error paths to avoid leaving half-programmed state or
untranslated BAR holes.
Advertise this capability by extending the common feature bit
initializer macro (DWC_EPC_COMMON_FEATURES).
This enables multiple inbound windows within a single BAR, which is
useful on platforms where usable BARs are scarce but EPFs need multiple
inbound regions.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260124145012.2794108-5-den@valinux.co.jp
The DesignWare EP core has supported updating the inbound iATU mapping
for an already configured BAR (i.e. allowing pci_epc_set_bar() to be
called again without a prior pci_epc_clear_bar()) since
commit 4284c88fff ("PCI: designware-ep: Allow pci_epc_set_bar() update
inbound map address").
Now that this capability is exposed via the dynamic_inbound_mapping EPC
feature bit, set it for DWC-based EP glue drivers using a common
initializer macro to avoid duplicating the same flag in each driver.
Note that pci-layerscape-ep.c is untouched. It currently constructs the
feature struct dynamically in ls_pcie_ep_init(). Once converted to a
static feature definition, it will use DWC_EPC_COMMON_FEATURES as well.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260124145012.2794108-4-den@valinux.co.jp
Some endpoint platforms have only a small number of usable BARs. At the
same time, EPF drivers (e.g. vNTB) may need multiple independent inbound
regions (control/scratchpad, one or more memory windows, and optionally
MSI or other feature-related regions). Subrange mapping allows these to
share a single BAR without consuming additional BARs that may not be
available, or forcing a fragile layout by aggressively packing into a
single contiguous memory range.
Extend the PCI endpoint core to support mapping subranges within a BAR.
Add an optional 'submap' field in struct pci_epf_bar so an endpoint
function driver can request inbound mappings that fully cover the BAR.
Introduce a new EPC feature bit, subrange_mapping, and reject submap
requests from pci_epc_set_bar() unless the controller advertises both
subrange_mapping and dynamic_inbound_mapping features.
The submap array describes the complete BAR layout (no overlaps and no
gaps are allowed to avoid exposing untranslated address ranges). This
provides the generic infrastructure needed to map multiple logical
regions into a single BAR at different offsets, without assuming a
controller-specific inbound address translation mechanism.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260124145012.2794108-3-den@valinux.co.jp
Introduce a new EPC feature bit (dynamic_inbound_mapping) that indicates
whether an Endpoint Controller can update the inbound address
translation for a BAR without requiring the EPF driver to clear/reset
the BAR first.
Endpoint Function drivers (e.g. vNTB) can use this information to decide
whether it really is safe to call pci_epc_set_bar() multiple times to
update inbound mappings for the BAR.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260124145012.2794108-2-den@valinux.co.jp
The current "has_msi_ctrl" flag name is misleading because it suggests the
presence of any MSI controller, while it is specifically set for platforms
that lack .msi_init() callback and don't have "msi-parent" or "msi-map"
device tree properties, indicating they rely on the iMSI-RX module for MSI
functionality.
Rename it to "use_imsi_rx" to make the intent clear:
- When true: Platform uses the iMSI-RX module for MSI handling
- When false: Platform has other MSI controller support (ITS/MBI, external
MSI controller)
No functional changes, only improves code readability and eliminates
naming confusion.
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
[mani: renamed 'uses_imsi_rx' to 'use_imsi_rx' per https://lore.kernel.org/linux-pci/09f9acc1-d1ad-4971-8488-f0268cf08799@rock-chips.com]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20260121-remove_cap_clean_up-v1-2-e78115e5d467@oss.qualcomm.com
Fix a grammatical error in the comment by changing "it's" to "its". Also
add a blank line after the variable declaration for better code
formatting.
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20260121-remove_cap_clean_up-v1-1-e78115e5d467@oss.qualcomm.com
The DWC driver tries to use a single iATU region for mapping the individual
entries of the bridge window and DMA range. If a bridge window/DMA range is
larger than the iATU inbound/outbound window size, then the mapping will
fail.
Hence, avoid this failure by using multiple iATU windows to map the whole
region. If the region runs out of iATU windows, then return failure.
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Co-developed-by: Randolph Lin <randolph@andestech.com>
Signed-off-by: Randolph Lin <randolph@andestech.com>
[mani: reworded description, minor code cleanup]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Charles Mirabile <cmirabil@redhat.com>
Link: https://patch.msgid.link/20260109113430.2767264-1-randolph@andestech.com
Remove dw_pcie_ep_hide_ext_capability() and replace its usage with
dw_pcie_remove_ext_capability(). Both functions serve the same purpose
of hiding PCIe extended capabilities, but dw_pcie_remove_ext_capability()
provides a cleaner API that doesn't require the caller to specify the
previous capability ID.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20251224-remove_dw_pcie_ep_hide_ext_capability-v1-1-4302c9cdc316@oss.qualcomm.com
In NXP i.MX6QP and i.MX7D SoCs, LTSSM registers are not accessible once
PME_Turn_Off message is broadcasted to the link. So there is no way to
verify whether the link has entered L2/L3 Ready state or not.
Hence, add a new flag 'dw_pcie_rp::skip_l23_ready' and set it to 'true' for
the above mentioned SoCs. This flag when set, will allow the DWC core to
skip polling for L2/L3 Ready state and just wait for 10ms as recommended in
the PCIe spec r6.0, sec 5.3.3.2.1.
Fixes: a528d1a725 ("PCI: imx6: Use DWC common suspend resume method")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: renamed flag to skip_l23_ready and reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260114083300.3689672-2-hongxing.zhu@nxp.com
The dw_pcie_wait_for_link() API now distinguishes link failures more
precisely:
-ENODEV: Device not found on the bus.
-EIO: Device found but inactive.
-ETIMEDOUT: Link failed to come up.
Out of these three errors, only -ETIMEDOUT represents a definitive link
failure since it signals that something is wrong with the link. For the
other two errors, there is a possibility that the link might come up later.
So fail dw_pcie_host_init() if -ETIMEDOUT is returned and skip the failure
otherwise.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260120-pci-dwc-suspend-rework-v4-5-2f32d5082549@oss.qualcomm.com
For the cases where the link cannot come up later i.e., when LTSSM is not
in Detect.{Quiet/Active} or Poll.{Active/Compliance} states,
dw_pcie_wait_for_link() should log an error.
So promote dev_info() to dev_err(), reword the error log to make it clear
and also print the LTSSM state to aid debugging.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Tested-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260120-pci-dwc-suspend-rework-v4-4-2f32d5082549@oss.qualcomm.com
Rename ltssm_status_string() to dw_pcie_ltssm_status_string() and move it
to the common file pcie-designware.c so that this function could be used
outside of pcie-designware-debugfs.c file.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Tested-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260120-pci-dwc-suspend-rework-v4-3-2f32d5082549@oss.qualcomm.com
There are cases where the PCIe device would be physically connected to the
bus, but the device firmware might not be active. So the LTSSM will
get stuck in POLL.{Active/Compliance} states.
This behavior is common with endpoint devices controlled by the PCI
Endpoint framework, where the device will wait for the user to start its
operation through configfs.
For those cases, print the relevant log and return -EIO to indicate that
the device is present, but not active. This will allow the callers to skip
the failure as the device might become active in the future.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260120-pci-dwc-suspend-rework-v4-2-2f32d5082549@oss.qualcomm.com
The dw_pcie_wait_for_link() function waits up to 1 second for the PCIe link
to come up and returns -ETIMEDOUT for all failures without distinguishing
cases where no device is present on the bus. But the callers may want to
just skip the failure if the device is not found on the bus and handle
failure for other reasons.
So after timeout, if the LTSSM is in Detect.Quiet or Detect.Active state,
return -ENODEV to indicate the callers that the device is not found on the
bus and return -ETIMEDOUT otherwise.
Also add kernel doc to document the parameter and return values.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Tested-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260120-pci-dwc-suspend-rework-v4-1-2f32d5082549@oss.qualcomm.com
commit f3a296405b ("PCI: dwc: Strengthen the MSI address allocation
logic") strengthened the iMSI-RX target address allocation logic to handle
64-bit addresses for platforms without 32-bit DMA addresses. However, it
still left 32-bit MSI capable endpoints (EPs) non-functional on such
platforms.
Per DWC databook r6.21a, sec 3.10.2.3, it states:
"The iMSI-RX is programmed with an address (MSI_CTRL_ADDR_OFF and
MSI_CTRL_UPPER_ADDR_OFF) that is used as the system MSI address. When an
inbound MWr request is passed to the AXI bridge and matches this address
as well as the conditions specified for an MSI memory write request, an
MSI interrupt is detected. When this MWr is about to be driven onto the
AXI bridge master interface1, it is dropped and never appears on the AXI
bus."
Since iMSI-RX MSI_CTRL_ADDR doesn't require actual system memory mapping,
any 32-bit address that won't be used for BAR memory allocations can be
assigned. So assign cfg0_base to the iMSI-RX target address as the first
option if it's a 32-bit address, which satisfies this requirement.
Otherwise, fallback to the existing coherent allocation.
cc: Ajay Agarwal <ajayagarwal@google.com>
cc: Will McVicker <willmcvicker@google.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: trimmed the description to exclude testbed info and used imperative tone]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/1766540332-24235-1-git-send-email-shawn.lin@rock-chips.com
dw_pcie_ep_raise_msi_irq() currently programs an outbound iATU window
for the MSI target address on every interrupt and tears it down again
via dw_pcie_ep_unmap_addr().
On systems that heavily use the AXI bridge interface (for example when
the integrated eDMA engine is active), this means the outbound iATU
registers are updated while traffic is in flight. The DesignWare
endpoint databook 5.40a - "3.10.6.1 iATU Outbound Programming Overview"
warns that updating iATU registers in this situation is not supported,
and the behavior is undefined.
Under high MSI and eDMA load this pattern results in occasional bogus
outbound transactions and IOMMU faults, on the RC side, such as:
ipmmu-vmsa eed40000.iommu: Unhandled fault: status 0x00001502 iova 0xfe000000
followed by the system becoming unresponsive. This is the actual output
observed on Renesas R-Car S4, with its ipmmu_hc used with PCIe ch0.
There is no need to reprogram the iATU region used for MSI on every
interrupt. The host-provided MSI address is stable while MSI is enabled,
and the endpoint driver already dedicates a scratch buffer for MSI
generation.
Cache the aligned MSI address and map size, program the outbound iATU
once, and keep the window enabled. Subsequent interrupts only perform a
write to the MSI scratch buffer, avoiding dynamic iATU reprogramming in
the hot path and fixing the lockups seen under load.
dw_pcie_ep_raise_msix_irq() is not modified, as each vector can have a
different msg_addr, and because the msg_addr is allowed to be changed
while the vector is masked. Neither problem is easy to solve with the
current design. Instead, the plan is for the DWC vendor drivers to
transition to dw_pcie_ep_raise_msix_irq_doorbell(), which does not rely
on the iATU.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
[cassel: improve commit message]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251222110144.3299523-2-cassel@kernel.org
This reverts commit 8d3bf19f1b.
While this fake hotplugging was a nice idea, it has shown that this feature
does not handle PCIe switches correctly:
pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
During the initial scan, PCI core doesn't see the switch and since the Root
Port is not hot plug capable, the secondary bus number gets assigned as the
subordinate bus number. This means, the PCI core assumes that only one bus
will appear behind the Root Port since the Root Port is not hot plug
capable.
This works perfectly fine for PCIe endpoints connected to the Root Port,
since they don't extend the bus. However, if a PCIe switch is connected,
then there is a problem when the downstream busses starts showing up and
the PCI core doesn't extend the subordinate bus number and bridge resources
after initial scan during boot.
So revert the change that skipped dw_pcie_wait_for_link() if the Link up
IRQ was used by a vendor glue driver.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-14-cassel@kernel.org
This reverts commit 4581403f67.
While this fake hotplugging was a nice idea, it has shown that this feature
does not handle PCIe switches correctly:
pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
During the initial scan, PCI core doesn't see the switch and since the Root
Port is not hot plug capable, the secondary bus number gets assigned as the
subordinate bus number. This means, the PCI core assumes that only one bus
will appear behind the Root Port since the Root Port is not hot plug
capable.
This works perfectly fine for PCIe endpoints connected to the Root Port,
since they don't extend the bus. However, if a PCIe switch is connected,
then there is a problem when the downstream busses starts showing up and
the PCI core doesn't extend the subordinate bus number and bridge resources
after initial scan during boot.
The long term plan is to migrate this driver to the upcoming pwrctrl APIs
that are supposed to handle this problem elegantly.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-13-cassel@kernel.org
This reverts commit ba4a2e2317.
Since the Link up IRQ support is going away, revert the MSI logic that got
added for it too.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: reworded the description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-12-cassel@kernel.org
This reverts commit 36971d6c5a.
While this fake hotplugging was a nice idea, it has shown that this feature
does not handle PCIe switches correctly:
pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
During the initial scan, PCI core doesn't see the switch and since the Root
Port is not hot plug capable, the secondary bus number gets assigned as the
subordinate bus number. This means, the PCI core assumes that only one bus
will appear behind the Root Port since the Root Port is not hot plug
capable.
This works perfectly fine for PCIe endpoints connected to the Root Port,
since they don't extend the bus. However, if a PCIe switch is connected,
then there is a problem when the downstream busses starts showing up and
the PCI core doesn't extend the subordinate bus number and bridge resources
after initial scan during boot.
The long term plan is to migrate this driver to the upcoming pwrctrl APIs
that are supposed to handle this problem elegantly.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-11-cassel@kernel.org
This reverts commit 0e0b45ab5d.
While this fake hotplugging was a nice idea, it has shown that this feature
does not handle PCIe switches correctly:
pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
During the initial scan, PCI core doesn't see the switch and since the Root
Port is not hot plug capable, the secondary bus number gets assigned as the
subordinate bus number. This means, the PCI core assumes that only one bus
will appear behind the Root Port since the Root Port is not hot plug
capable.
This works perfectly fine for PCIe endpoints connected to the Root Port,
since they don't extend the bus. However, if a PCIe switch is connected,
then there is a problem when the downstream busses starts showing up and
the PCI core doesn't extend the subordinate bus number and bridge resources
after initial scan during boot.
The long term plan is to migrate this driver to the upcoming pwrctrl APIs
that are supposed to handle this problem elegantly.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-10-cassel@kernel.org
This reverts commit ec9fd499b9.
While this fake hotplugging was a nice idea, it has shown that this feature
does not handle PCIe switches correctly:
pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
During the initial scan, PCI core doesn't see the switch and since the Root
Port is not hot plug capable, the secondary bus number gets assigned as the
subordinate bus number. This means, the PCI core assumes that only one bus
will appear behind the Root Port since the Root Port is not hot plug
capable.
This works perfectly fine for PCIe endpoints connected to the Root Port,
since they don't extend the bus. However, if a PCIe switch is connected,
then there is a problem when the downstream busses starts showing up and
the PCI core doesn't extend the subordinate bus number and bridge resources
after initial scan during boot.
The long term plan is to migrate this driver to the upcoming pwrctrl APIs
that are supposed to handle this problem elegantly.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-9-cassel@kernel.org
During system suspend, if the PCIe link is not up, then there is no need
to broadcast PME_Turn_Off message and wait for L2/L3 transition. So skip
them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20251218-pci-dwc-suspend-rework-v2-1-5a7778c6094a@oss.qualcomm.com
Rename rockchip_pcie_get_ltssm() to rockchip_pcie_get_ltssm_reg() and add
rockchip_pcie_get_ltssm() to get_ltssm() callback in order to show the
proper L1 Substates. The PCIE_CLIENT_LTSSM_STATUS[5:0] register returns
the same LTSSM layout as enum dw_pcie_ltssm. So the driver just need to
convey L1 PM Substates by returning the proper value defined in
pcie-designware.h.
cat /sys/kernel/debug/dwc_pcie_a40000000.pcie/ltssm_status
L1_2 (0x142)
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/1765503205-22184-2-git-send-email-shawn.lin@rock-chips.com
DWC core couldn't distinguish LTSSM state among L1.0, L1.1 and L1.2. But
the vendor glue driver may implement additional logic to convey this
information. So add two pseudo definitions for vendor glue drivers to
translate their internal L1 Substates for debugfs to show.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/1765503205-22184-1-git-send-email-shawn.lin@rock-chips.com
Some platforms (e.g., X1E80100) expose Downstream Port Containment (DPC)
Extended Capability registers in the PCIe Root Port config space, but do
not fully support it. To prevent undefined behavior and ensure DPC cap is
not visible to PCI framework and users, remove DPC Extended Capability
unconditionally, since there is no Qcom platform support DPC till now.
Co-developed-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251109-remove_cap-v1-5-2208f46f4dc2@oss.qualcomm.com
On some platforms like Glymur, the hardware does not support MSI-X in RC
mode, yet still exposes the MSI-X capability. However, it omits the
required MSI-X Table and PBA structures.
This mismatch can lead to issues where the PCIe port driver requests MSI-X
instead of MSI, causing the Root Port to trigger interrupts by writing to
an uninitialized address, resulting in SMMU faults.
To address this, remove MSI-X capability unconditionally for Root Ports of
all SoCs as none of the Qcom PCIe Root Ports support MSI-X.
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
[mani: updated description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251109-remove_cap-v1-4-2208f46f4dc2@oss.qualcomm.com
Some platforms may not support ITS (Interrupt Translation Service) and MBI
(Message Based Interrupt), or there are not enough available empty SPI
lines for MBI, in which case the msi-map and msi-parent property will not
be provided in device tree node. For those cases, the DWC PCIe driver
defaults to using the iMSI-RX module as MSI controller. However, due to
DWC IP design, iMSI-RX cannot generate MSI interrupts for Root Ports even
when MSI is properly configured and supported as iMSI-RX will only monitor
and intercept incoming MSI TLPs from PCIe link, but the memory write
generated by Root Port are internal system bus transactions instead of
PCIe TLPs, so they are ignored.
This leads to interrupts such as PME, AER from the Root Port not received
on the host and the users have to resort to workarounds such as passing
"pcie_pme=nomsi" cmdline parameter.
To ensure reliable interrupt handling, remove MSI and MSI-X capabilities
from Root Ports when using iMSI-RX as MSI controller, which is indicated
by 'dw_pcie_rp::has_msi_ctrl == true'. This forces a fallback to INTx
interrupts by default, eliminating the need for manual kernel command line
workarounds.
With this behavior:
- Platforms with ITS/MBI support use ITS/MBI MSI for interrupts from all
components.
- Platforms without ITS/MBI support fall back to INTx for Root Ports and
use iMSI-RX for other PCI devices.
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
[mani: reworded the comment]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20251109-remove_cap-v1-3-2208f46f4dc2@oss.qualcomm.com
On some platforms, certain PCIe Capabilities may be present in hardware
but are not fully implemented as defined in PCIe spec. These incomplete
capabilities should be hidden from the PCI framework to prevent unexpected
behavior.
Introduce two APIs to remove a specific PCIe Capability and Extended
Capability by updating the previous capability's next offset field to skip
over the unwanted capability. These APIs allow RC drivers to easily hide
unsupported or partially implemented capabilities from software.
Co-developed-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251109-remove_cap-v1-2-2208f46f4dc2@oss.qualcomm.com
Add support for finding the preceding capability position in PCI
capability list by extending the capability finding macros with an
additional parameter. This functionality is essential for modifying PCI
capability list, as it provides the necessary information to update the
"next" pointer of the predecessor capability when removing entries.
Modify two macros to accept a new 'prev_ptr' parameter:
- PCI_FIND_NEXT_CAP - Now accepts 'prev_ptr' parameter for standard
capabilities
- PCI_FIND_NEXT_EXT_CAP - Now accepts 'prev_ptr' parameter for extended
capabilities
When a capability is found, these macros:
- Store the position of the preceding capability in *prev_ptr
(if prev_ptr != NULL)
- Maintain all existing functionality when prev_ptr is NULL
Update current callers to accommodate this API change by passing NULL to
'prev_ptr' argument if they do not care about the preceding capability
position.
No functional changes to driver behavior result from this commit as it
maintains the existing capability finding functionality while adding the
infrastructure for future capability removal operations.
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251109-remove_cap-v1-1-2208f46f4dc2@oss.qualcomm.com
The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaT4RWBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIVfSgEA23oY0kPjLLkNj4KAjLoWVPmZ/5efKw49
m6YUwfvzTS8BAIq4eFHVecwAM8FAe9NwuOKgO5d9u6epAy6wzBeP2jly
=cpHq
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmk8YxITHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi702B/9Mfj0HQSAaWCyMz6GJAv8+1ijVTSbG
nTFeMmipYZhPn188OvWqHsf1cw9rWY0fzenIEW05Tk3YmMvYdeRmCcOkZdeG06xw
um8XxX4L8315E0b98CCpQpVa02ux7XoNtBPjeHccl8PEErJQgQJrQ3Cc/C8kk5U5
a0KlfeVRXYWkOPJva3+wosOu0t9QgJ9ABt5stqcvYDfdkKfvatQMBN3N1nNRKkFH
yhNPv+nRtypSk8jiHhKeeCVmosC0L7MnKuO593vDr761cY5mKrgKFqc2LLlPF6r0
/p13s5SG6X38RUegWCjcK4XRJAzVcR/tyod8LkVVp8d5DC/ptcyy8H+I
=h1gC
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jbkd
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTsgBwAKCRDdBJ7gKXxA
jkSIAP4jD66nEC2QyKTiv9XvXi8rpKz6RGAHNZSam0ucI5WKswEAoflmlqsoD/Kk
sN3YLwLztzCJIYU7tT3IRaPK0irwDAo=
=nkux
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
- The 2 patch series "powerpc/pseries/cmm: two smaller fixes" from David
Hildenbrand fixes a couple of minor things in ppc land.
- The 4 patch series "Improve folio split related functions" from Zi Yan
provides some cleanups and minorish fixes in the folio splitting code.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTseCwAKCRDdBJ7gKXxA
jkCLAP9ttvtG7zhDf+tqvjCJFnybPEo6Z2B4Qx9g8i7s27gTZgD8DzYbIl+YdxrN
/tS0tdgUfrJIXR2PzzipkydNrs+lxgg=
=T65o
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "powerpc/pseries/cmm: two smaller fixes" (David Hildenbrand)
fixes a couple of minor things in ppc land
- "Improve folio split related functions" (Zi Yan)
some cleanups and minorish fixes in the folio splitting code
* tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/tests/core-kunit: avoid damos_test_commit stack warning
mm: vmscan: correct nr_requested tracing in scan_folios
MAINTAINERS: add idr core-api doc file to XARRAY
mm/hugetlb: fix incorrect error return from hugetlb_reserve_pages()
mm: fix CONFIG_STACK_GROWSUP typo in mm.h
mm/huge_memory: fix folio split stats counting
mm/huge_memory: make min_order_for_split() always return an order
mm/huge_memory: replace can_split_folio() with direct refcount calculation
mm/huge_memory: change folio_split_supported() to folio_check_splittable()
mm/sparse: fix sparse_vmemmap_init_nid_early definition without CONFIG_SPARSEMEM
powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages
powerpc/pseries/cmm: call balloon_devinfo_init() also without CONFIG_BALLOON_COMPACTION
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Fixes: 011703a9ac ("file: add FD_{ADD,PREPARE}()")
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
