1. Configure battery charger and front camera on GT-I9100 phone.
2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags
to match real type of interrupt coming from the device.
3. Correct DTS with dtschema. This brings back the commit adding input
clock to CMU in Exynos4412 Odroid which was reverted some time ago
due to unsupported deferred probes (now supported and tested).
-----BEGIN PGP SIGNATURE-----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=5sWm
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.13
1. Configure battery charger and front camera on GT-I9100 phone.
2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags
to match real type of interrupt coming from the device.
3. Correct DTS with dtschema. This brings back the commit adding input
clock to CMU in Exynos4412 Odroid which was reverted some time ago
due to unsupported deferred probes (now supported and tested).
* tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add front camera support to I9100
ARM: dts: exynos: white-space cleanups
ARM: dts: exynos: replace deprecated NTC/Murata compatibles
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family
ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family
ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100
ARM: dts: exynos: add charger supply for I9100
Link: https://lore.kernel.org/r/20210407065828.7213-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Mostly configures addtional devices for various boards, and
updates the gpio line names for beagle boards so userspace can
optionally find the right lines:
- Use unique gpio line names for am335x-pocketbeagle
- Update omap3-echo led configuration and add ath6kl node
- Fix indentation for am3 tscadc node
- Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing
- Use unique gpio line names for am335x-boneblack.dts
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmBsMhoRHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXPOjQ/9EBQTWEWx4ra3ApVn2dfCuCnNpPP08FQO
Wkjjzcy01SkJwRy9ykOgPcP8fVSpN3eLyBevJIrUhq9Gd5jPH0z38VRsq3bRncgm
NjceEMXvo+p7eY3bcJxSVE7PR7HStR1cKvH0fIPmBOS5Ucjkq1qjstGpkKhiQxSK
JCIjdxtfdWYgXJOSCiQGlptKVC35b8YlJojH7P5R2Rt2p7TEWJN/jivvlPrbESTj
KlnNqQ30IjAAgYYy/DDzsoVAlBFjbCUWl8+buN5TDe8BAyJ1bLlxeCZ1ZaM9478q
a0UxIyOblef8cDwKwxQY8/Cb3IRewPE1XwmD5rcotH71mqFZmLPaqCy9+dnucRv2
vpwd/XztBqkVXf/ln/agSTjy6HVHj527gLv0BMhS2a1Rm6IOOP5QA6TTKUJaQw/p
Ohw8/JducUf34bKDIRJHEjpGtveV+1M0KS1tevcQsPa+vR6gz6MSic8UPgNT3PuK
Y5mXv8YASoRNUE/IMqE2w6qNsgwDQdOivRhKMhIQkwaFomX6++rQlhsx7fF1RTB5
KJJOJ2rKtnWaotisWjl9GGq11SxoFVgEOGzX7YwPhQz9TTVNkjwVmm9WrTFlhR76
8c7xDplIg0umsQ1FPo+d8B9cKwtWfK0zzo7+w8eLRBI87TTgBnH5VAYPa69IxlXF
Q6LqJjSCL4E=
=xF+N
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.13
Mostly configures addtional devices for various boards, and
updates the gpio line names for beagle boards so userspace can
optionally find the right lines:
- Use unique gpio line names for am335x-pocketbeagle
- Update omap3-echo led configuration and add ath6kl node
- Fix indentation for am3 tscadc node
- Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing
- Use unique gpio line names for am335x-boneblack.dts
* tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-boneblack.dts: unique gpio-line-names
ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing
ARM: dts: am33xx-l4: fix tscadc@0 node indentation
ARM: dts: omap3-echo: Add ath6kl node
ARM: dts: omap3-echo: Update LED configuration
ARM: dts: am335x-pocketbeagle: unique gpio-line-names
Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Missing "chosen" node can cause issues when booting a kernel
with a boot-loader that doesn't create a chosen node if this
isn't present in the DTB since the decompressor relies on a
pre-existing chosen node to be available to insert the command
line and merge other ATAGS info.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Link: https://lore.kernel.org/r/20210405051658.26779-5-shc_work@mail.ru'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds SYSCON descriptors to framebuffer, SPI, DAI
and modem control GPIO nodes to further rework these drivers
to remove the call to the syscon_regmap_lookup_by_compatible() function.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Link: https://lore.kernel.org/r/20210405051658.26779-1-shc_work@mail.ru'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This extends the initial SM8350 description merged in v5.12 with
CPUfreq, SMMU, UFS, RPMHPD, SPMI, USB and remoteproc support. It adds
initial PMIC definitions for the 6 PMICs found on the MTP and it
introduces the new SM8350 Hardware Development Kit (HDK).
SC7180 is further polished, the DisplayPort portion of the QMP phy is
defined and several new SKUs of the Trogdor devices are introduced.
The new SC7280 platform is introduced, with RPMH, RPMHPD, RPMCC, SPMI,
CPU idle, SMMU and watchdog defined.
SDM845 gains the camera related nodes and some cleanups.
For SM8250 it brings some cleanups and migrates SPI0 to use GPIO for
chip select.
-----BEGIN PGP SIGNATURE-----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=a6Po
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for 5.13
This extends the initial SM8350 description merged in v5.12 with
CPUfreq, SMMU, UFS, RPMHPD, SPMI, USB and remoteproc support. It adds
initial PMIC definitions for the 6 PMICs found on the MTP and it
introduces the new SM8350 Hardware Development Kit (HDK).
SC7180 is further polished, the DisplayPort portion of the QMP phy is
defined and several new SKUs of the Trogdor devices are introduced.
The new SC7280 platform is introduced, with RPMH, RPMHPD, RPMCC, SPMI,
CPU idle, SMMU and watchdog defined.
SDM845 gains the camera related nodes and some cleanups.
For SM8250 it brings some cleanups and migrates SPI0 to use GPIO for
chip select.
* tag 'qcom-arm64-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (79 commits)
arm64: dts: qcom: qrb5165-rb5: switch into using GPIO for SPI0 CS
arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS
arm64: dts: qcom: sm8250: further split of spi pinctrl config
arm64: dts: qcom: sm8250: split spi pinctrl config
arm64: dts: qcom: sdm845-db845c: Enable ov8856 sensor and connect to ISP
arm64: dts: qcom: sdm845-db845c: Configure regulators for camss node
arm64: dts: qcom: sdm845: Add CAMSS ISP node
arm64: dts: qcom: pm8150: Enable RTC
arm64: dts: qcom: sm8350-mtp: Add PMICs
arm64: dts: qcom: pmr735B: Add base dts file
arm64: dts: qcom: pmr735a: Add base dts file
arm64: dts: qcom: pm8350c: Add base dts file
arm64: dts: qcom: pm8350b: Add base dts file
arm64: dts: qcom: pm8350: Add base dts file
arm64: dts: qcom: pmk8350: Add base dts file
arm64: dts: qcom: sm8350: Add spmi node
arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x
dt-bindings: arm: qcom: Add SM8350 HDK
arm64: dts: qcom: sc7180: Drop duplicate dp_hot_plug_det node in trogdor
arm64: dts: qcom: sm8350: fix number of pins in 'gpio-ranges'
...
Link: https://lore.kernel.org/r/20210404164914.712946-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add DT for fan control on SolidRun Clearfog GT8k platform
Add syscon compatible to NB clk node allowing improving cpufreq
support on Armada 37xx
Add support for UTMI PHY allowing removing kernel dependency from the
boot loader for UBS port connected to this PHY (Armada 7K, 8K and
CN91xx)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCYGeE7AAKCRALBhiOFHI7
1RLbAJ9PYflp+wQ8QZRza75fOOsvfY9m2ACfRe+U9StkSx9+wD6lxiTcUiYbjfc=
=OYlz
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.13 (part 1)
Add DT for fan control on SolidRun Clearfog GT8k platform
Add syscon compatible to NB clk node allowing improving cpufreq
support on Armada 37xx
Add support for UTMI PHY allowing removing kernel dependency from the
boot loader for UBS port connected to this PHY (Armada 7K, 8K and
CN91xx)
* tag 'mvebu-dt64-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: enable CP110 UTMI PHY usage
arm64: dts: marvell: add support for Marvell CP110 UTMI PHY
arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node
arm64: dts: marvell: clearfog-gt-8k: add cooling maps
arm64: dts: marvell: clearfog-gt-8k: add pwm-fan
Link: https://lore.kernel.org/r/874kgocs7t.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
adding:
- New secondary interrupt controller binding to support the wake-up
- Use the RSB bus instead of I2C for the PMIC on the H6
- HDMI support for the BananaPi M2-Zero
- New board: Topwise A721
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYGchiwAKCRDj7w1vZxhR
xW1/APsFH9bywTduCrsuJui1LdD3mVbhkN75tKfBw7Ce8rmloAD/U5dth8PKA4h6
yPCdc2k0XaK7ItcD3eveN2uwiNq89gU=
=Ktsz
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- New secondary interrupt controller binding to support the wake-up
- Use the RSB bus instead of I2C for the PMIC on the H6
- HDMI support for the BananaPi M2-Zero
- New board: Topwise A721
* tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: beelink-x2: Add power button
arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection
ARM: dts: sunxi: h2-plus-bananapi-m2-zero: Add HDMI out
ARM: dts: sun4i: Add support for Topwise A721 tablet
dt-bindings: arm: Add Topwise A721
arm64: dts: allwinner: Move wakeup-capable IRQs to r_intc
arm64: dts: allwinner: Use the new r_intc binding
ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc
ARM: dts: sunxi: h3/h5: Add r_intc node
ARM: dts: sunxi: Use the new r_intc binding
Link: https://lore.kernel.org/r/8a3e3271-bebe-4d27-a9e7-7b7a6311a38d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Video IN (VIN) and Camera (CSI-2) support for the R-Car M3-W+ SoC,
- LED support for the Falcon development board,
- Preparatory display pipeline support for the R-Car V3U SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYGbVawAKCRCKwlD9ZEnx
cEgrAP9eZ3MAYaiATSSPB4KvErvRYc9dqMgHWfHX7Su+LpyPZAD/ViFlg1drXMNV
HNo3oZUWTChPek4zbe7EUcjpLhWzawk=
=fkRt
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.13-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.13 (take two)
- Video IN (VIN) and Camera (CSI-2) support for the R-Car M3-W+ SoC,
- LED support for the Falcon development board,
- Preparatory display pipeline support for the R-Car V3U SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.13-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: ulcb: Add cpu-supply property to a57_0 node
arm64: dts: renesas: salvator-common: Add cpu-supply property to a57_0 node
arm64: dts: renesas: r8a77950: Drop operating points above 1.5 GHz
arm64: dts: renesas: r8a779a0: Fix PMU interrupt
arm64: dts: renesas: r8a779a0: Add VSPD support
arm64: dts: renesas: r8a779a0: Add FCPVD support
arm64: dts: renesas: falcon-cpu: Add GP LEDs
arm64: dts: renesas: r8a77961: Add VIN and CSI-2 device nodes
ARM: dts: koelsch: Configure pull-up for SOFT_SW GPIO keys
arm64: dts: renesas: falcon: Move AVB0 to main DTS
arm64: dts: renesas: falcon: Move watchdog config to CPU board DTS
arm64: dts: renesas: falcon: Move console config to CPU board DTS
Link: https://lore.kernel.org/r/cover.1617359678.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the board bindings for the MeCool (Videostrong Technology Co., Ltd)
KII-Pro (S905D) and KIII-Pro (S912) devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210402064521.30579-2-christianshewitt@gmail.com
Enable support for CP110 UTMI PHY in Armada SoC family platform
device trees.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add support for Marvell CP110 UTMI PHY in a CP11x DTSI
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add "syscon" compatible to the North Bridge clocks node to allow the
cpufreq driver to access these registers via syscon API.
This is needed for a fix of cpufreq driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: e8d66e7927 ("arm64: dts: marvell: armada-37xx: add nodes...")
Cc: stable@vger.kernel.org
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add cooling maps suitable for a Noctua NF-A4/10 fan attached to the
heat sink. The fan will toggle between two speeds in operation which
seems to be normal behaviour. More fine-grained steps may help to
reduce this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add pwm-fan support for controlling the fan speed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add the cpu-supply property to the a57_0 node, so Dynamic Voltage and
Frequency Scaling (DVFS) can change the CPU core voltage.
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210326105009.1574424-3-geert+renesas@glider.be
Add the cpu-supply property to the a57_0 node, so Dynamic Voltage and
Frequency Scaling (DVFS) can change the CPU core voltage.
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210326105009.1574424-2-geert+renesas@glider.be
The higher operating frequencies for the Cortex-A57 CPU cores, which
were first documented in the R-Car Gen3 Hardware User's Manual revision
0.54, apply to R-Car H3 ES2.0 (r8a77951).
Play it safe and restrict R-Car H3 ES1.x to 1.5 GHz, by removing the
"turbo-mode" entries from the operating points table inherited from
r8a77951.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210311110552.3124180-1-geert+renesas@glider.be
This contains a couple of device tree fixes for the v5.12 release cycle.
These are needed for proper audio support on Jetson AGX Xavier, to boot
the Jetson Xavier NX from an SD card and to be able to suspend/resume
the Jetson TX2.
-----BEGIN PGP SIGNATURE-----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=4Hys
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree fixes for v5.12-rc6
This contains a couple of device tree fixes for the v5.12 release cycle.
These are needed for proper audio support on Jetson AGX Xavier, to boot
the Jetson Xavier NX from an SD card and to be able to suspend/resume
the Jetson TX2.
* tag 'tegra-for-5.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Move clocks from RT5658 endpoint to device node
arm64: tegra: Fix mmc0 alias for Jetson Xavier NX
arm64: tegra: Set fw_devlink=on for Jetson TX2
arm64: tegra: Add unit-address for ACONNECT on Tegra186
Link: https://lore.kernel.org/r/20210401172622.3352990-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a couple of improvements and fixes for various 32-bit
Tegra-based boards.
-----BEGIN PGP SIGNATURE-----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=TBic
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.13-rc1
This contains a couple of improvements and fixes for various 32-bit
Tegra-based boards.
* tag 'tegra-for-5.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: acer-a500: Add atmel,wakeup-method property
ARM: tegra: Specify tps65911 as wakeup source
ARM: tegra: Specify memory suspend OPP in device-tree
ARM: tegra: Specify CPU suspend OPP in device-tree
ARM: tegra: ouya: Specify all CPU cores as cooling devices
ARM: tegra: nexus7: Specify all CPU cores as cooling devices
ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node
ARM: tegra: acer-a500: Specify all CPU cores as cooling devices
ARM: tegra: acer-a500: Reduce thermal throttling hysteresis to 0.2C
ARM: tegra: acer-a500: Enable core voltage scaling
ARM: tegra: paz00: Enable full voltage scaling ranges for CPU and Core domains
ARM: tegra: cardhu: Support CPU thermal throttling
ARM: tegra: cardhu: Support CPU frequency and voltage scaling on all board variants
ARM: tegra: ventana: Support CPU thermal throttling
ARM: tegra: ventana: Support CPU and Core voltage scaling
Link: https://lore.kernel.org/r/20210401172622.3352990-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
One single changes that adds the nvidia,pmc property to the XUSB pad
controller binding, which will subsequently be used to implement USB
sleepwalk functionality.
-----BEGIN PGP SIGNATURE-----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=uQug
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.13-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.13-rc1
One single changes that adds the nvidia,pmc property to the XUSB pad
controller binding, which will subsequently be used to implement USB
sleepwalk functionality.
* tag 'tegra-for-5.13-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop
Link: https://lore.kernel.org/r/20210401172622.3352990-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
MCU part:
-Add stm32h750 SoC support. It is based on stm32h743 and embeds
crypto IPs and 2 ADC.
-Add new art-pi board based on stm32h750. This board embeds:
-8MB QSPI flash.
-16MB SPI flash.
-32MB SDRAM.
-AP6212 combo (wifi/bt/fm).
MPU part:
-Use dedicated PTP clock for Ethernet controller on stm32mp151.
-Enable i2c analog filter on stm32mp151.
-DH:
-Update GPIO names.
-Enable crc1 & crryp1 on DHSOM.
-Engicam: add new boards support:
-MicroGEA SOM which embeds STM32MP157aac, 512 MB Nand Flash
I2S.
-MicroGEA STM32MP1 Microdev 2.0 which embeds MicroGEA SOM,
Ethernet up to 100 Mbps, USB typeA, microSD, UMTS LTE, Wifi/BT
LVDS panel connector.
-MicroGEA STM32MP1 MicroDev 2.0 7" which embeds a MicroGEA STM32MP1
MicroDev 2.0 plus 7" Open Frame panel solution (7" AUO B101AW03 LVDS panel
and EDT DT5526 Touch)
-i.Core STM32MP1 EDIMM SoM based on STM32MP157A.
-C.TOUCH 2.0 n EDIMM compliant general purpose Carrier board with capacitive
touch interface support based on i.Core STM32MP1 EDIMM SoM.
It embeds ETH 10/100, wifi/bt, CAN, USB TypeA/OTG, LVDS pannel connector.
-EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board based on i.Core STM32MP1 EDIMM SoM. IT embeds LCD 7" C.Touch,
wifi/bt,2*LVDS FHD, 3*USB2, 1*USB3 ...
-----BEGIN PGP SIGNATURE-----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=+l6P
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.13, round 1
Highlights:
----------
MCU part:
-Add stm32h750 SoC support. It is based on stm32h743 and embeds
crypto IPs and 2 ADC.
-Add new art-pi board based on stm32h750. This board embeds:
-8MB QSPI flash.
-16MB SPI flash.
-32MB SDRAM.
-AP6212 combo (wifi/bt/fm).
MPU part:
-Use dedicated PTP clock for Ethernet controller on stm32mp151.
-Enable i2c analog filter on stm32mp151.
-DH:
-Update GPIO names.
-Enable crc1 & crryp1 on DHSOM.
-Engicam: add new boards support:
-MicroGEA SOM which embeds STM32MP157aac, 512 MB Nand Flash
I2S.
-MicroGEA STM32MP1 Microdev 2.0 which embeds MicroGEA SOM,
Ethernet up to 100 Mbps, USB typeA, microSD, UMTS LTE, Wifi/BT
LVDS panel connector.
-MicroGEA STM32MP1 MicroDev 2.0 7" which embeds a MicroGEA STM32MP1
MicroDev 2.0 plus 7" Open Frame panel solution (7" AUO B101AW03 LVDS panel
and EDT DT5526 Touch)
-i.Core STM32MP1 EDIMM SoM based on STM32MP157A.
-C.TOUCH 2.0 n EDIMM compliant general purpose Carrier board with capacitive
touch interface support based on i.Core STM32MP1 EDIMM SoM.
It embeds ETH 10/100, wifi/bt, CAN, USB TypeA/OTG, LVDS pannel connector.
-EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board based on i.Core STM32MP1 EDIMM SoM. IT embeds LCD 7" C.Touch,
wifi/bt,2*LVDS FHD, 3*USB2, 1*USB3 ...
* tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits)
ARM: dts: stm32: Add PTP clock to Ethernet controller
ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOM
ARM: dts: stm32: Update GPIO line names on PicoITX
ARM: dts: stm32: Update GPIO line names on DRC02
ARM: dts: stm32: Fill GPIO line names on AV96
ARM: dts: stm32: Fill GPIO line names on DHCOM SoM
dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties'
ARM: stm32: Add a new SoC - STM32H750
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
ARM: dts: stm32: fix i2c node typo in stm32h743
ARM: dts: stm32: add new instances for stm32h743 MCU
ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
dt-bindings: arm: stm32: Add compatible strings for ART-PI board
Documentation: arm: stm32: Add stm32h750 value line doc
ARM: dts: stm32: enable the analog filter for all I2C nodes in stm32mp151
ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM
dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
...
Link: https://lore.kernel.org/r/48784f53-943b-0baf-d4a0-fcb7d3849b00@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix up the WLAN on Janice
- Fix the touchscreen on TVK R2
- Push down definitions to the UIBs instead of
trying to share too much.
- Bump the AUX1 voltage on the AB8500 so the
touchscreen will work.
- Define the CTTYSP touchscreen on the TVK R3.
-----BEGIN PGP SIGNATURE-----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=SkXC
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Ux500 DTS changes for the v5.13 kernel cycle:
- Fix up the WLAN on Janice
- Fix the touchscreen on TVK R2
- Push down definitions to the UIBs instead of
trying to share too much.
- Bump the AUX1 voltage on the AB8500 so the
touchscreen will work.
- Define the CTTYSP touchscreen on the TVK R3.
* tag 'ux500-dts-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Add Cypress CTTYSP touch to TVK UIB
ARM: dts: ux500: Bump AUX1 voltage
ARM: dts: ux500: Clarify UIB version per board
ARM: dts: ux500: Totally separate TVK R2 and R3
ARM: dts: ux500: Push TC35893 defines to each UIB
ARM: dts: ux500: Fix up TVK R3 sensors
ARM: dts: ux500: Push sensors to TVK R2 board
ARM: dts: ux500: Move Synaptics to right include
ARM: dts: ux500: Fix touchscreen on TVK R2
ARM: dts: ux500: Fix BT+WLAN on Janice
Link: https://lore.kernel.org/r/CACRpkdanRQ6A85d=7vgpzbg-m3-yFcpQ4fuzrxZu3RJ0DrA2bQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Couple of changes to describe PCI dma-ranges correctly which was
previously removed and to enable the PCIe and DMA SMMU.
-----BEGIN PGP SIGNATURE-----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=b/Gg
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno updates for v5.13
Couple of changes to describe PCI dma-ranges correctly which was
previously removed and to enable the PCIe and DMA SMMU.
* tag 'juno-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Enable more SMMUs
arm64: dts: juno: Describe PCI dma-ranges
Link: https://lore.kernel.org/r/20210331100410.cenuhvpqoumvsk52@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Dong Aisheng to update i.MX8Q device trees for adopting
SS (SubSystems) based bindings.
- New board support: Kontron pitx-imx8m, Engicam i.Core MX8M Mini.
- A series from Adrien Grassein to add various peripheral support for
imx8mm-nitrogen-r2 board.
- A series from Guido Günther to update librem5-devkit device tree.
- A number of patches from Michael Walle to add Root Complex Event
Collector interrupt, update MTD partitions and add rtc0 alias for
ls1028a-kontron-sl28 board.
- Add EQOS MAC support for phyBOARD-Pollux-i.MX8MP.
- Add 2x2 SFP+ cage support for clearfog-itx boards.
- Small and random update for various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj8eYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7Lygf9EHqZZOU7WA0nmmsBM9qJcEmY32aY
XV+9MAqnCDKGoSWtbsApJBft3/SnzRVa+cUiLfUKt3iGaTGpB6xWnHQjnmmJr4zU
aXbrjnR9C4z+xo2P6DvreVs2t6lIj/OI8S2M3nolROfHFQ05/c25+fcWnE4sbnNQ
4y8PQJ4hWaBkerMZEnFZLY4MDAJbJduQP2rnQ3vW4P1K2Be/4iw9luYEMUnZZ7K6
jVLOa7eaPiWZGi7TnxPm+GYHnoGVoFI4dKMkv1rdfpgSGn77yIXquyYPgCuHvgv2
XuroZCKex2mpE/JIsr+hdGHIAjp/nS+OTbR5tlQtpUFuBb77ZPG8yERIxQ==
=2phP
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.13:
- A series from Dong Aisheng to update i.MX8Q device trees for adopting
SS (SubSystems) based bindings.
- New board support: Kontron pitx-imx8m, Engicam i.Core MX8M Mini.
- A series from Adrien Grassein to add various peripheral support for
imx8mm-nitrogen-r2 board.
- A series from Guido Günther to update librem5-devkit device tree.
- A number of patches from Michael Walle to add Root Complex Event
Collector interrupt, update MTD partitions and add rtc0 alias for
ls1028a-kontron-sl28 board.
- Add EQOS MAC support for phyBOARD-Pollux-i.MX8MP.
- Add 2x2 SFP+ cage support for clearfog-itx boards.
- Small and random update for various boards.
* tag 'imx-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (55 commits)
arm64: dts: fsl-ls1028a-kontron-sl28: add rtc0 alias
arm64: dts: ls1028a: move rtc alias to individual boards
arm64: dts: fsl-ls1028a-kontron-sl28: combine unused partitions
arm64: dts: fsl-ls1028a-kontron-sl28: move MTD partitions
arm64: dts: imx8mp-evk: Improve the Ethernet PHY description
arm64: dts: imx8mq-librem5-r3: Mark buck3 as always on
arm64: dts: imx8mq-librem5: Hog the correct gpio
arm64: dts: lx2160a-clearfog-itx: add SFP support
arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART
arm64: dts: imx8mn: Reorder flexspi clock-names entry
arm64: dts: imx8mm: Reorder flexspi clock-names entry
arm64: dts: ls1028a: set up the real link speed for ENETC port 2
arm64: dts: imx8mm-nitrogen-r2: add ecspi2 support
arm64: dts: imx: add imx8qm mek support
arm64: dts: imx: add imx8qm common dts file
arm64: dts: imx8qm: add dma ss support
arm64: dts: imx8: split adma ss into dma and audio ss
arm64: dts: imx8qm: add conn ss support
arm64: dts: imx8qm: add lsio ss support
arm64: dts: imx8: switch to new lpcg clock binding
...
Link: https://lore.kernel.org/r/20210331041019.31345-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: i.MX7D based reMarkable2.
- Clean up imx6ql-pfla02 hog group by moving pins into corresponded
client groups.
- Add Netronix embedded controller for imx50-kobo-aura.
- A series from Sebastian Reichel to improve GE Bx50v3 device trees.
- Support I2C bus recovery for imx6qdl-wandboard by adding SCL/SDA
GPIOs.
- Remove unnecessary #address-cells/#size-cells from imx6qdl-gw boards.
- Various small and random device tree update.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj7dIUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7VvAf/ckU9OP3OK1gWqxPJTWFdkpETU4si
14G7AvfWJ47d/V5c5EP40CwDnJM6hKgnpWK7IYY89b0Ud6tHH/KhhUzhbT2tMGNa
4sRdIcsFiWOTHJNVgUcceVyPV90xJ8E3OXNe5HwKIZlYlayNcrFmEhVVRd6yzKG5
wAd6DRIcaltzLRJb67UMckLj/7UHhOv1wmrEGAXDQ01CXVUj26pOVWdoOIheRzV6
FiDlQwoyAZW5TITkU7ofpcth8wmgs+5E2HvEtCor9Sdu7MTUOuS9PhyXyNyDx4AN
fIeUSKOJ1Hwd2BQKAyx3EAo3DWy7LbmZiYJkNaCV1Ii+5HhFeIc0V6oqkQ==
=wW2x
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 5.13:
- New board support: i.MX7D based reMarkable2.
- Clean up imx6ql-pfla02 hog group by moving pins into corresponded
client groups.
- Add Netronix embedded controller for imx50-kobo-aura.
- A series from Sebastian Reichel to improve GE Bx50v3 device trees.
- Support I2C bus recovery for imx6qdl-wandboard by adding SCL/SDA
GPIOs.
- Remove unnecessary #address-cells/#size-cells from imx6qdl-gw boards.
- Various small and random device tree update.
* tag 'imx-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (21 commits)
ARM: dts: imx6: pbab01: Set USB OTG port to peripheral
ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing
ARM: imx7d-remarkable2: Initial device tree for reMarkable2
ARM: dts: imx7d-mba7: Remove unsupported PCI properties
ARM: dts: imx6qdl-gw*: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx6dl-plybas: Fix gpio-keys W=1 warnings
ARM: dts: imx: bx50v3: Define GPIO line names
ARM: dts: imx: bx50v3: i2c GPIOs are open drain
ARM: dts: imx6q-ba16: improve PHY information
ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
ARM: dts: ls1021a: mark crypto engine dma coherent
ARM: dts: colibri-imx6ull: Change drive strength for usdhc2
ARM: dts: imx6ql-pfla02: Move "hog" pins into corresponded pin groups
ARM: dts: imx6qdl-phytec-pbab01: Select synchronous mode for AUDMUX
ARM: dts: imx6qdl-ts7970: Drop redundant "fsl,mode" option
ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin
ARM: dts: ls1021a: Harmonize DWC USB3 DT nodes name
ARM: dts: imx6qdl-wandboard: add scl/sda gpios definitions for i2c bus recovery
ARM: dts: imx: Mark IIM as syscon on i.MX51/i.MX53
ARM: dts: imx6sl-tolino-shine2hd: Add Netronix embedded controller
...
Link: https://lore.kernel.org/r/20210331041019.31345-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.13, please pull the following:
- Rafal continues to add support for the 4908 SoCs and describes the USB
PHY, firmware flash partitions and Ethernet switch and Ethernet
controller. He also adds support for the TP-Link Archer C2300 V1
router and upates the Netgear R8000P and Asus GT-AC5300 routers network
ports description.
-----BEGIN PGP SIGNATURE-----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=MdDK
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.13/devicetre-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.13, please pull the following:
- Rafal continues to add support for the 4908 SoCs and describes the USB
PHY, firmware flash partitions and Ethernet switch and Ethernet
controller. He also adds support for the TP-Link Archer C2300 V1
router and upates the Netgear R8000P and Asus GT-AC5300 routers network
ports description.
* tag 'arm-soc/for-5.13/devicetre-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: add Ethernet MAC addr
arm64: dts: broadcom: bcm4908: add Ethernet TX irq
arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode
arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
arm64: dts: broadcom: bcm4908: fix switch parent node name
arm64: dts: broadcom: bcm4908: describe firmware partitions
arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs
arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
arm64: dts: broadcom: bcm4908: describe Ethernet controller
arm64: dts: broadcom: bcm4908: describe USB PHY
Link: https://lore.kernel.org/r/20210330184006.1451315-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.13, please pull the following:
- Rafal fixes YAML warnings for the memory nodes of BCM5301X nodes and
adds support for the NVMEM NVRAM node on Linksys and Luxul WLAN
routers. He also fixes up the partitions for the Linksys EA9400 to
use the newly introduced parser compatible and sets the power LED to
its default state.
-----BEGIN PGP SIGNATURE-----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=X7wu
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.13/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.13, please pull the following:
- Rafal fixes YAML warnings for the memory nodes of BCM5301X nodes and
adds support for the NVMEM NVRAM node on Linksys and Luxul WLAN
routers. He also fixes up the partitions for the Linksys EA9400 to
use the newly introduced parser compatible and sets the power LED to
its default state.
* tag 'arm-soc/for-5.13/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Set Linksys EA9500 power LED
ARM: dts: BCM5301X: Fix Linksys EA9500 partitions
ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul routers
ARM: dts: BCM5301X: fix "reg" formatting in /memory node
Link: https://lore.kernel.org/r/20210330184006.1451315-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Patches from Krzysztof Kozlowski that fixes dtc warnings
and dtbs_check warnings
- Adjust the "cnds,read-delay" value for the Agilex devkit to 2
-----BEGIN PGP SIGNATURE-----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=JYZq
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.13
- Patches from Krzysztof Kozlowski that fixes dtc warnings
and dtbs_check warnings
- Adjust the "cnds,read-delay" value for the Agilex devkit to 2
* tag 'socfpga_dts_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: adjust qpsi read-delay property
arm64: dts: intel: socfpga_agilex_socdk_nand: align LED node names with dtschema
arm64: dts: intel: socfpga_agilex: align node names with dtschema
arm64: dts: intel: socfpga_agilex: use defined for GIC interrupts
arm64: dts: intel: socfpga_agilex: move usbphy out of soc node
arm64: dts: intel: socfpga_agilex: remove default status=okay
arm64: dts: intel: socfpga_agilex: move timer out of soc node
arm64: dts: intel: socfpga_agilex: move clocks out of soc node
arm64: dts: intel: socfpga: override clocks by label
Link: https://lore.kernel.org/r/20210330110430.558182-2-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to move omap4/5 and dra7 to probe with devicetree data and genpd,
we need to add the missing interconnect target module configuration for
the drivers that do not still have it. This is similar to what we have
already done earlier for am3 and 4 earlier.
These patches are very much similar for all the three SoCs here. The dra7
changes were already available for v5.12 merge window, but were considered
too late to add for v5.12. The patches for omap4 and 5 follow the same
pattern, except for PCIe that is available only on dra7.
We do the changes one driver at a time, and still keep the legacy property
for "ti,hwmods" mostly around, except for cases when already not needed.
We will be dropping the custom property and related legacy data in a
follow-up series.
-----BEGIN PGP SIGNATURE-----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=4Uqt
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/dts-genpd-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for genpd support for v5.13
In order to move omap4/5 and dra7 to probe with devicetree data and genpd,
we need to add the missing interconnect target module configuration for
the drivers that do not still have it. This is similar to what we have
already done earlier for am3 and 4 earlier.
These patches are very much similar for all the three SoCs here. The dra7
changes were already available for v5.12 merge window, but were considered
too late to add for v5.12. The patches for omap4 and 5 follow the same
pattern, except for PCIe that is available only on dra7.
We do the changes one driver at a time, and still keep the legacy property
for "ti,hwmods" mostly around, except for cases when already not needed.
We will be dropping the custom property and related legacy data in a
follow-up series.
* tag 'omap-for-v5.13/dts-genpd-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (53 commits)
ARM: dts: Configure simple-pm-bus for omap5 l3
ARM: dts: Configure simple-pm-bus for omap5 l4_cfg
ARM: dts: Configure simple-pm-bus for omap5 l4_per
ARM: dts: Configure simple-pm-bus for omap5 l4_wkup
ARM: dts: Move omap5 l3-noc to a separate node
ARM: dts: Move omap5 mmio-sram out of l3 interconnect
ARM: dts: Configure interconnect target module for omap5 sata
ARM: dts: Configure interconnect target module for omap5 gpmc
ARM: dts: Configure interconnect target module for omap5 mpu
ARM: dts: Configure interconnect target module for omap5 emif
ARM: dts: Configure interconnect target module for omap5 dmm
ARM: dts: Prepare for simple-pm-bus for omap4 l3
ARM: dts: Configure simple-pm-bus for omap4 l4_cfg
ARM: dts: Configure simple-pm-bus for omap4 l4_per
ARM: dts: Configure simple-pm-bus for omap4 l4_wkup
ARM: dts: Move omap4 l3-noc to a separate node
ARM: dts: Move omap4 mmio-sram out of l3 interconnect
ARM: dts: Configure interconnect target module for omap4 mpu
ARM: dts: Configure interconnect target module for omap4 debugss
ARM: dts: Configure interconnect target module for omap4 emif
...
Link: https://lore.kernel.org/r/pull-1617004205-537424@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-4-p.yadav@ti.com
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-3-p.yadav@ti.com
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-2-p.yadav@ti.com
All of the currently known MStar/SigmaStar ARMv7 SoCs have at least
one MPLL and it seems to always be at the same place so add it to
the base dtsi.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210301123542.2800643-4-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All of the currently known MStar/SigmaStar ARMv7 SoCs have an "xtal"
clock input that is usually 24MHz and an "RTC xtal" that is usually 32KHz.
The xtal input has to be connected to something so it's enabled by default.
The MSC313 and MSC313E do not bring the RTC clock input out to the pins
so it's impossible to connect it. The SSC8336 does bring the input
out to the pins but it's not always actually connected to something.
The RTC node needs to always be present because in the future the nodes
for the clock muxes will refer to it even if it's not usable.
The RTC node is disabled by default and should be enabled at the board
level if the RTC input is wired up.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210301123542.2800643-3-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All of the ARCH_MSTARV7 chips have an MPLL as the source for
peripheral clocks so select MSTAR_MSC313_MPLL.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210301123542.2800643-2-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the PTP clock to the Ethernet controller. Otherwise, the driver uses the
main clock to derive the PTP frequency which is not necessarily the correct one.
Tested with linuxptp on Olimex STMP1-OLinuXino-LIME2.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The MT8183 Pumpkin board is manufactured by OLogic and includes
a MediaTek MT8183 SoC with 2GB of RAM.
The board provides the following IOs:
* 2 USB Type-A ports
* Ethernet
* Serial UART over micro-USB port
* 1 USB Type-C dual role port
* 1 USB Type-C power only port
* 1 Jack for audio
* RPI compatible header
* MT7668 wiresless chip with Wi-Fi AC and BT 5
* Micro-HDMI port
* 2 connectors for CSI cameras
* 1 connector for DSI display
* 1 JTAG port
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210217205945.830006-2-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the CRC accelerator on all STM32MP15xx DHSOM based systems
and CRYP accelerator on all STM32MP15x[CF] DHSOM based systems.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
