commit b7293c6e8c upstream.
Before batman-adv is allowed to write to an skb, it either has to have its
own copy of the skb or use skb_cow() to ensure that the data part is not
shared. But batadv_frag_skb_fwd() modifies the TTL even when it is shared.
Adding a skb_cow() right before this operation avoids this and can at the
same time prepare it for the modifications required to forward the
fragment.
Cc: stable@kernel.org
Fixes: 610bfc6bc9 ("batman-adv: Receive fragmented packets and merge")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e728bbdf32 upstream.
The broadcast and multicast packets can be received at the same time by the
local system and forwarded to other nodes. Both are simply decrementing the
TTL at the beginning of the receive path - independent of chosen paths
(receive/forward). But such a modification of the data conflicts with the
hw csum. This is not a problem when the packet is directly forwarded but
can cause errors in the local receive path.
Such a problem can then trigger a "hw csum failure". The receiver path must
therefore ensure that the csum is fixed for each modification of the
payload before batadv_interface_rx() is reached.
Since all batman-adv packet types with a ttl have it as u8 at offset 2, a
helper can be used for all of them. But it is only used at the moment for
batadv_bcast_packet and batadv_mcast_packet because they are the only ones
which deliver the packet locally but unconditionally modify the TTL.
Cc: stable@kernel.org
Fixes: 3f69339068 ("batman-adv: bcast: queue per interface, if needed")
Fixes: 07afe1ba28 ("batman-adv: mcast: implement multicast packet reception and forwarding")
[ Context, Drop change for non-existing mcast handling ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4cd6d3a4b9 upstream.
Before batman-adv is allowed to write to an skb, it either has to have its
own copy of the skb or used skb_cow() to ensure that the data part is not
shared.
The old implementation used a shared queue and created copies before
attempting to write to it. But with the new implementation, the broadcast
packet is already modified when it gets received. Potentially writing to
shared buffers in this process.
Adding a skb_cow() right before this operation avoids this and can at the
same time prepare it for the modifications required to rebroadcast the
packet.
Cc: stable@kernel.org
Fixes: 3f69339068 ("batman-adv: bcast: queue per interface, if needed")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 811cb00fa8 upstream.
The last_recv_time is the most important indicator for a receiver session
to figure out whether a session timed out or not. But this information was
only initialized after the session was added to the tp_receiver_list and
after the timer was started.
In the worst case, the timer (function) could have tried to access this
information before the actual initialization was reached. Like rest of the
variables of the tp_meter receiver session, this field has to be filled out
before any other (parallel running) context has the chance to access it.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5e50d4b8ae upstream.
batadv_v_elp_start_timer() enqeues a delayed work. The time when it starts
is randomly chosen between (elp_interval - BATADV_JITTER) and
(elp_interval + BATADV_JITTER). The configured elp_interval must therefore
be larger or equal to BATADV_JITTER to avoid that it causes an underflow of
the unsigned integer. If this would happen, then a "fast" ELP interval
would turn into a "day long" delay.
At the same time, it must not be larger than the maximum value the variable
can store.
Cc: stable@kernel.org
Fixes: a108008290 ("batman-adv: Add elp_interval hardif genl configuration")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 98b0fb191c upstream.
The lasttime field for claim, backbone_gw, and loopdetect tracks the
jiffies value of the most recent activity and is used to detect timeouts.
These accesses are not consistently protected by a lock, so
READ_ONCE/WRITE_ONCE must be used to prevent data races caused by compiler
optimizations.
Cc: stable@kernel.org
Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 15ccbf6852 upstream.
When the receiver variables (aka "session") are initialized, then they are
added to the list of sessions before the timer is set up. A RCU protected
reader could therefore find the entry and run mod_setup before
batadv_tp_init_recv() finished the timer initialization.
The same is true for batadv_tp_start(), which must first initialize the
finish_work and the test_length to avoid a similar problem.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f54c85ed42 upstream.
The recover variable and the last_sent sequence number are initialized on
purpose as a really high value which will wrap-around after the first 2000
bytes. The fast recovery precondition must therefore not use simple integer
comparisons but use helpers which are aware of the sequence number
wrap-arounds.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2b0d08f08e upstream.
The fast recovery precondition checks if the recover (initialized to
BATADV_TP_FIRST_SEQ) is bigger than the received ack. But since recover is
only updated when this check is successful, it will never enter the fast
recovery mode.
According to RFC6582 Section 3.2 step 2, the check should actually be
different:
> When the third duplicate ACK is received, the TCP sender first
> checks the value of recover to see if the Cumulative
> Acknowledgment field covers more than recover
The precondition must therefore check if recover is smaller than the
received ack - basically swapping the operands of the current check.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 33ccd52f3c upstream.
The cwnd is always MSS <= cwnd <= 0x20000000. But the calculation in
batadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics.
((mss * 8) ** 2) / (cwnd * 8)
In case cwnd is actually 0x20000000, it will be shifted by 3 bit to the
left end up at 0x100000000 or U32_MAX + 1. It will therefore wrap around
and be 0 - resulting in:
((mss * 8) ** 2) / 0
This is of course invalid and cannot be calculated. The calculation should
must be simplified to avoid this overflow:
(mss ** 2) * 8 / cwnd
It will keep the precision enhancement from the scaling (by 8) but avoid
the overflow in the divisor.
In theory, there could still be an overflow in the dividend. It is at the
moment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not an
imminent problem. But allowing it to use the whole u32 bit range, would
mean that it can still use up to 67 bits. To keep this calculation safe for
32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits -
or in other words: must never be larger than 16383.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 765947b81f upstream.
In batadv_tp_avail(), win_left is calculated with 32-bit unsigned
arithmetic: win_left = win_limit - tp_vars->last_sent;
During Fast Recovery, cwnd is inflated and last_sent advances rapidly. When
Fast Recovery ends, cwnd drops abruptly back to ss_threshold. If the newly
shrunk win_limit is less than last_sent, the unsigned subtraction will
underflow, wrapping to a massive positive value. Instead of returning that
the window is full (unavailable), it returns that the sender can continue
sending.
To handle this situation, it must be checked whether the windows end
sequence number (win_limit) has to be compared with the last sent sequence
number. If it would be before the last sent sequence number, then more acks
are needed before the transmission can be started again.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit febfb1b862 upstream.
When batadv_tp_update_cwnd() is called, dec_cwnd is increased. But dec_cwnd
is only initialixed (to 0) when a duplicate Ack was received or when cwnd
is below the ss_threshold.
Just initialize the cwnd during the initialization to avoid any potential
access of uninitialized data.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b2b68b32a7 upstream.
When an ack with a sequence number equal to the last_acked is received, the
dup_acks counter is increased to decide whether fast retransmit should be
performed. Only when the sequence numbers are not equal, the dup_acks is
set to the initial value (0).
But if the initial packet would have the sequence number
BATADV_TP_FIRST_SEQ, dup_acks would not be initialized and atomic_inc would
operate on an undefined starting value. It is therefore required to have it
explicitly initialized during the start of the sender session.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5aa8651527 upstream.
When batadv_tp_handle_out_of_order inserts a new entry in the list of
unacked (out of order) packets, it searches from the entry with the newest
sequence number towards oldest sequence number. If an entry is found which
is older than the newly entry, the new entry has to be added after the
found one to keep the ascending order.
But for this operation list_add_tail() was used. But this function adds an
entry _before_ another one. As result, the list would contain a lot of
swapped sequence numbers. The consumer of this list
(batadv_tp_ack_unordered()) would then fail to correctly ack packets.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78c09c0f4d ]
On platform where SVE is supported but there are less than 2 VLs available
the signal SVE change test should be skipped instead of failing.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220524103149.2802-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Yijia Wang <wangyijia.yeah@bytedance.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ef057cbf82 upstream.
When recovering hugepages in the shadow MMU, verify that the base gfn of
the shadow page is actually contained within the target memslot, *before*
querying the max mapping level given the shadow page's gfn. Failure to
pre-check the validity of the gfn can lead to an out-of-bounds access to
the slot's lpage_info (which typically manifests as a host #PF because the
lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its
PTEs) that extends "below" the bounds of a memslot.
When faulting in memory for a guest, and the size of the guest mapping is
greater than KVM's (current) max mapping, then KVM will create a "direct"
shadow page (direct in that there are no gPTEs to shadow, and so the target
gfn is a direct calculation given the base gfn of the shadow page). The
hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB
mappings when dirty logging generates the guest > host mapping size case.
When the 4KiB restriction is lifted, then KVM can replace the shadow page
with a hugepage.
But if KVM originally used a smaller mapping than the guest because the
range of memory covered by the guest hugepage exceeds the bounds of a
memslot, then KVM will link a direct shadow page with a gfn that is outside
the bounds of the memslot being used to fault in memory. The rmap entry
added for the leaf mapping is correct and within bounds, but the gfn of the
leaf SPTE's parent shadow page will be out of bounds.
BUG: unable to handle page fault for address: ffffc90000806ffc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0
Oops: Oops: 0000 [#1] SMP
CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm]
Call Trace:
<TASK>
kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm]
kvm_set_memslot+0x1ee/0x590 [kvm]
kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm]
kvm_vm_ioctl+0x9bf/0x15d0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0xbb0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f21c0f1a9bf
</TASK>
Don't bother pre-checking the bounds of the potential hugepage, i.e. don't
check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also
within the memslot, as the checks performed by kvm_mmu_max_mapping_level()
are a superset of the basic bounds checks. I.e. pre-checking the full
range would be a dubious micro-optimization.
Fixes: 9eba50f8d7 ("KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Alexander Bulekov <bkov@amazon.com>
Cc: Fred Griffoul <fgriffo@amazon.co.uk>
Cc: Alexander Graf <graf@amazon.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Filippo Sironi <sironi@amazon.de>
Cc: Ivan Orlov <iorlov@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 8510559c0f, which is
commit 26285e689c upstream.
The reverted commit extends the selftest to test timestamp event queue mask
manipulation in testptp. It exercises masks PTP_MASK_CLEAR_ALL and
PTP_MASK_EN_SINGLE, introduced in commit c5a445b1e9 ("ptp: support event
queue reader channel masks"), which is not on this stable branch. The test
case thus cannot be built against this tree's own UAPI headers.
The reverted commit was introduced to resolve a missing dependency of
commit bef3a83a9a ("testptp: Add option to open PHC in readonly mode"),
which is 76868642e4 upstream. The only conflict between the two is the
getopt string, and there is otherwise no direct dependency between the two.
This patch therefore reverts the cited commit, with hand-resolving the
getopt string to include 'r' (as introduced by c6dc458227), but not
'F' (introduced by c1c5068979).
Reported-by: Yong Wang <yongwang@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 6b32d042aa, which is
commit 3d07b691ee upstream.
The cited commit allows testptp to set a configurable clock_id. That is
done via a PTP_SYS_OFFSET_EXTENDED ioctl call, whose argument is struct
ptp_sys_offset_extended, where the clock_id is set. However, this Linux
version does not support the ptp_sys_offset_extended.clockid field, and
the test case cannot be built against this tree's own UAPI headers.
The reverted commit was introduced to resolve a missing dependency of
commit bef3a83a9a ("testptp: Add option to open PHC in readonly mode"),
which is 76868642e4 upstream. My suspicion is that the only conflict
between the two is the getopt string, and there is otherwise no direct
dependency between the two.
This patch therefore reverts the cited commit, with hand-resolving the
getopt string to include 'r' (as introduced by c6dc458227), but not
'y' (introduced by 06954f715d).
Reported-by: Yong Wang <yongwang@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 06b4135177 upstream.
iput() called from fuse_release_end() can Oops if the super block has
already been destroyed. Normally this is prevented by waiting for
num_waiting to go down to zero before commencing with super block shutdown.
This only works, however, for the last submount instance, as the wait
counter is per connection, not per superblock.
Revert to using synchronous release requests for the auto_submounts case,
which is virtiofs only at this time.
Reported-by: Aurélien Bombo <abombo@microsoft.com>
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: Greg Kurz <gkurz@redhat.com>
Closes: https://github.com/kata-containers/kata-containers/issues/12589
Fixes: 26e5c67deb ("fuse: fix livelock in synchronous file put from fuseblk workers")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kurz <gkurz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d8bf3d8f9 upstream.
syzbot reported a general protection fault in
vidtv_psi_ts_psi_write_into [1].
vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does
not check for this before dereferencing the returned pointer to access
the continuity counter. This leads to a general protection fault when
accessing a near-NULL address.
The root cause is that vidtv_mux_pid_ctx_init() does not check the
return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs.
If the allocation fails, the PID context is never created, but init
returns success. The subsequent vidtv_mux_push_si() call then gets
NULL from vidtv_mux_get_pid_ctx() and crashes.
Fix both the root cause (add error check in vidtv_mux_pid_ctx_init
for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for
all vidtv_mux_get_pid_ctx() calls.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events vidtv_mux_tick
RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197
Call Trace:
<TASK>
vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline]
vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231
vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196
vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408
Fixes: f90cf6079b ("media: vidtv: add a bridge driver")
Cc: stable@vger.kernel.org
Reported-by: syzbot+814c351d094f4f1a1b86@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=814c351d094f4f1a1b86
Signed-off-by: Ruslan Valiyev <linuxoid@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a287620312 upstream.
A KASAN null-ptr-deref was observed in vcs_notifier():
BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130
Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {}
The issue is a race condition in vcs_write(). When the console_lock is
temporarily dropped (to copy data from userspace), the vc_data pointer
obtained from vcs_vc() may become stale. After re-acquiring the lock,
vcs_vc() is called again to re-validate the pointer. If the vc has been
deallocated in the meantime, vcs_vc() returns NULL, and the while loop
breaks (with written > 0). However, after the loop, vcs_scr_updated(vc)
is still called with the now-NULL vc pointer, leading to a null pointer
dereference in the notifier chain (vcs_notifier dereferences param->vc).
Fix this by adding a NULL check for vc before calling vcs_scr_updated().
Fixes: 8fb9ea65c9 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260604060734.2914976-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 497330b203 upstream.
If late enabling of a supply regulator fails in
regulator_resolve_supply(), the code currently triggers a lockdep
warning:
WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596
...
Call trace:
_regulator_put+0x80/0xa0 (P)
regulator_resolve_supply+0x7cc/0xbe0
regulator_register_resolve_supply+0x28/0xb8
as the regulator_list_mutex must be held when calling _regulator_put().
To solve this, simply switch to using regulator_put().
While at it, we should also make sure that no concurrent access happens
to our rdev while we clear out the supply pointer. Add appropriate
locking to ensure that.
While the code in question will be removed altogether in a follow-up
commit, I believe it is still beneficial to have this corrected before
removal for future reference.
Fixes: 36a1f1b6dd ("regulator: core: Fix memory leak in regulator_resolve_supply()")
Fixes: 8e5356a736 ("regulator: core: Clear the supply pointer if enabling fails")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-2-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nazar Kalashnikov <nazarkalashnikov0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d119775f2b upstream.
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue.
Fixes: 314001f0bf ("af_unix: Add OOB support")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506140825.2987635-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Martyniuk <alexevgmart@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit edcbe06453 upstream
Suspend-resume cycle test revealed a memory leak in 6.17-rc3
Turns out the slot_id race fix changes accidentally ends up calling
xhci_free_virt_device() with an incorrect vdev parameter.
The vdev variable was reused for temporary purposes right before calling
xhci_free_virt_device().
Fix this by passing the correct vdev parameter.
The slot_id race fix that caused this regression was targeted for stable,
so this needs to be applied there as well.
Fixes: 2eb0337615 ("usb: xhci: Fix slot_id resource race conflict")
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/linux-usb/20250829181354.4450-1-00107082@163.com
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Suggested-by: David Wang <00107082@163.com>
Cc: stable@vger.kernel.org
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b08472db93 upstream.
A NULL pointer dereference was observed in the AMD64 AGP driver when
running in a virtualized environment (e.g. qemu/kvm) without a physical
AMD northbridge. The crash occurs in amd64_fetch_size() when attempting
to dereference the pointer returned by node_to_amd_nb(0).
The root cause of this crash is broken error propagation in
agp_amd64_probe(): When no AMD northbridges are found, cache_nbs()
correctly returns -ENODEV. However, the probe function erroneously
checks the return value against exactly -1, rather than < 0.
As a result, the hardware absence error is masked, allowing the driver
to improperly proceed with initialization. It eventually calls
agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware
does not exist, node_to_amd_nb(0) returns NULL, leading to a General
Protection Fault (GPF) when accessing its ->misc member.
Fix the issue by correcting the error check in agp_amd64_probe() to
abort properly when cache_nbs() returns any negative error code. This
prevents the driver from erroneously proceeding without hardware, thereby
avoiding the subsequent NULL pointer dereference at its source.
Fixes: a32073bffc ("[PATCH] x86_64: Clean and enhance up K8 northbridge access code")
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.18+
Link: https://patch.msgid.link/20260504074823.99377-1-w15303746062@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d00c953a8f upstream.
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
BUG: unable to handle page fault for address: ffffffffde942eef
Oops: 0002 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY
RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27)
Call Trace:
<TASK>
__rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101)
rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6096)
__netif_receive_skb_one_core (net/core/dev.c:6208)
netif_receive_skb (net/core/dev.c:6467)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2003)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
</TASK>
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers.
Fixes: ceed73a2cf ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260514122511.3083479-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6036b5067a upstream.
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
Fixes: 4710317891 ("i2c-stub: Implement I2C block support")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6b079629b upstream.
bnxt_re_alloc_ucontext() allocates uctx->shpg via
__get_free_page(GFP_KERNEL). The buddy allocator does not zero pages
without __GFP_ZERO, so the page contains stale kernel data from
whatever object most recently freed it.
The page is then mapped into userspace via vm_insert_page() under
BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes
4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside
bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed
to userspace unsanitised, leaking kernel memory contents.
Any user with access to /dev/infiniband/uverbsX on a host with a
bnxt_re device (typically rdma group membership) can read this data
via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT.
Other shared pages in the same file already use get_zeroed_page()
correctly:
drivers/infiniband/hw/bnxt_re/ib_verbs.c
srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL);
cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL);
uctx->shpg is the only outlier. Bring it in line with the existing
convention by switching to get_zeroed_page().
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Lord Ulf Henrik Holmberg <henrik.holmberg@defensify.se>
Link: https://patch.msgid.link/20260509084011.11971-1-pomzm67@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2bed2ced40 ]
Variables allocated by kvzalloc should not be freed by kfree.
Because they may be allocated by vmalloc.
So we replace kfree with kvfree here.
Fixes: d6a4c18566 ("vfio iommu: Implementation of ioctl for dirty pages tracking")
Signed-off-by: Jiacheng Shi <billsjc@sjtu.edu.cn>
Link: https://lore.kernel.org/r/20211212091600.2560-1-billsjc@sjtu.edu.cn
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dd72e6c3cd upstream.
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails.
Fixes: 1f0477f183 ("iio: light: new driver for the ROHM BH1780")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ moved both pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend() before the error check instead of just pm_runtime_put_autosuspend() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Elizaveta Tereshkina <etereshkina@astralinux.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 99d9958fa1 upstream.
The helpers to prepare the buffers for the local and global TT based
replies are trying to sum up all TT entries which can be found for each
VLAN. In theory, this sum can be too big for an u16 and therefore overflow.
A too small buffer would then be allocated for the TVLV.
The too small buffer will be handled gracefully by
batadv_tt_tvlv_generate() and is not causing a buffer overflow - just a
truncated reply. But this overflow shouldn't have happened in the first and
the too small buffer should never have been allocated when an overflow was
detected.
Cc: stable@kernel.org
Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1e9fab756f upstream.
The commit 3a359bf5c6 ("batman-adv: reject oversized global TT response
buffers") added a check to ensure that a global return buffer size can be
stored in an u16. The same buffer handling also exists for the local data
buffer but was not touched.
A similar check should be also be in place for the local TVLV buffer. It
doesn't have the similar attack surface because it is only generated from
locally discovered MAC addresses but the dynamic nature could still cause
temporarily to large buffers.
Cc: stable@kernel.org
Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f93fad5ea ]
A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2
registers. Kicking off a dispatch with a zero count in any of the three
dimensions is invalid. First, the hardware will process 0 as 65536,
while the user-space driver exposes a maximum of 65535. Over that, a
submission with a zeroed workgroup dimension should be a no-op.
These zeroed counts can reach the dispatch path through an indirect CSD
job, whose workgroup counts are only known once the indirect buffer is
read and may legitimately be zero, but such scenario should only result in
a no-op.
Overwrite the indirect CSD job workgroup counts with the indirect BO
ones, even if they are zeroed, and don't submit the job to the hardware
when any of the workgroup counts is zero, so the job completes immediately
instead of running the shader.
Cc: stable@vger.kernel.org
Fixes: d223f98f02 ("drm/v3d: Add support for compute shader dispatch.")
Suggested-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260602-v3d-fix-indirect-csd-v4-2-654309e32bc0@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d3768826d ]
Instead of storing the queue's active job in four different variables,
store the active job inside the queue's state. This way, it's possible
to access all active jobs using an index based in `enum v3d_queue`.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://lore.kernel.org/r/20250826-v3d-queue-lock-v3-2-979efc43e490@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Stable-dep-of: 7f93fad5ea ("drm/v3d: Skip CSD when it has zeroed workgroups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d289d53077 ]
john1988 and Noam Rathaus reported that vti6_init_net() does not set the
netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0).
Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel)
correctly set this flag during their fallback device initialization to
prevent them from being moved to another network namespace.
Fixes: 61220ab349 ("vti6: Enable namespace changing")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260608155918.787644-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Salvatore Bonaccorso: Backport for version without 0c493da863 ("net:
rename netns_local to netns_immutable") in v6.15-rc1 and without
05c1280a2b ("netdev_features: convert NETIF_F_NETNS_LOCAL to
dev->netns_local") in v6.12-rc1 and use NETIF_F_NETNS_LOCAL device
feature.]
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff287df16a ]
[Why & How]
All record-chain walk loops in bios_parser.c and bios_parser2.c use
for(;;) and only terminate on a 0xFF record_type sentinel or zero
record_size. A malformed VBIOS image missing the terminator record
causes unbounded iteration at probe time, potentially hundreds of
thousands of iterations with record_size=1. In the final iterations
near the BIOS image boundary, struct casts beyond the 2-byte header
validated by GET_IMAGE can also read out of bounds.
Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256)
iterations. The atombios.h defines up to 22 distinct record types
and atomfirmware.h has 13. Assuming an average of less than 10
records per type (which is reasonable since most are connector-
based) 256 is a generous upper bound.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Assisted-by: Copilot:claude-opus-4.6 Mythos
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 95700a3d66)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 899ee91156 ]
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined.
Fixes: 8b796475fd ("net/sched: act_pedit: really ensure the skb is writable")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Reported-by: Han Guidong <2045gemini@gmail.com>
Reported-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Han Guidong <2045gemini@gmail.com>
Tested-by: Han Guidong <2045gemini@gmail.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260531123221.48732-1-jhs@mojatatu.com
[rename include file from linux/unaligned.h to asm/unaligned.h]
Conflicts:
include/net/tc_act/tc_pedit.h
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3c9673e2f ]
Unbounded info messages in the pedit datapath can flood the printk
ring buffer quite easily depending on the action created.
As these messages are informational, usually printing some, not all,
is enough to bring attention to the real issue.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit e3c9673e2f)
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1201bc781 ]
Static key offsets should always be on 32 bit boundaries. Validate them on
create/update time for static offsets and move the datapath validation
for runtime offsets only.
iproute2 already errors out if a given offset and data size cannot be
packed to a 32 bit boundary. This change will make sure users which
create/update pedit instances directly via netlink also error out,
instead of finding out when packets are traversing.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit e1201bc781)
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e3d1b2c48 ]
FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios
can contain uninitialized data.
Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already
in the page cache and not wait for data from the FUSE daemon, treat
!uptodate folios as if they weren't present.
This only has security impact on systems that don't enable automatic
zero-initialization of all page allocations via
CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.
Cc: stable@kernel.org
Fixes: 2d45ba381a ("fuse: add retrieve request")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20260519-fuse-retrieve-uptodate-v1-1-a7a1912a37f9@google.com
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
[adjusted for stable: page instead of folio]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/20260616145100.376842714@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Pavel Machek (CIP) <pavel@nabladev.com>
Link: https://lore.kernel.org/r/20260617080316.111043001@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62443dc211 ]
`ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and
`hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)`
after either assuming that the skb is associated with an Ethernet
device or checking only that the `ETH_HLEN` bytes at
`skb_mac_header(skb)` lie between `skb->head` and `skb->data`.
Make these paths first verify that the skb is associated with an
Ethernet device, that the MAC header was set, and that it spans at
least a full Ethernet header before accessing `eth_hdr(skb)`.
Suggested-by: Florian Westphal <fw@strlen.de>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ff24f2ecfd upstream.
Session lookups in tp_list matched only on destination address (and
optionally session ID), leaving role validation to the caller. If two
sessions with the same other_end coexisted (one as sender, one as receiver)
a lookup could silently return the wrong one, causing the caller's role to
bail out early, potentially skipping necessary cleanup.
Move the role check into the lookup functions themselves so the correct
entry is always returned, or none at all. Since batadv_tp_start()
legitimately needs to detect any active session to a destination regardless
of role, introduce a dedicated helper for that case rather than bending the
existing lookup semantics.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71dce47f07 upstream.
batadv_tp_sender_shutdown() previously used two separate variables to track
session state: sending (an atomic flag indicating whether the session was
active) and reason (a plain enum storing the stop reason). This introduced
a race window between the two writes: after sending was cleared to 0,
batadv_tp_send() could observe the stopped state and call
batadv_tp_sender_end() before reason was written, causing the wrong stop
reason to be reported to the caller.
Fix this by consolidating both variables into a single atomic send_result,
which holds 0 while the session is running and the stop reason once it
ends.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e60dafe97 upstream.
Commit d07b26f392 ("ksmbd: require minimum ACE size in
smb_check_perm_dacl()") introduced a transposed bounds check:
if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE)
Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates
to `aces_size < 0`. Because `aces_size` is always non-negative, this
check becomes dead code and never breaks the loop.
Worse, that commit removed the old 4-byte guard, meaning the loop now
reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This
re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation
during subsequent SMB2_CREATE operations.
Fix this by properly transposing the comparison to require at least
16 bytes (8-byte offset + 8-byte SID base), matching the correct form
used in smb_inherit_dacl().
Fixes: d07b26f392 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ganiyev <ali.qaniyev@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 149324fc76 upstream.
bluetoothd has a bug with makes it send extra bytes as part of
MGMT_OP_ADD_EXT_ADV_DATA which are now being checked to be the
exact the expected length, relax this so only when the expected
length is greater than the data length to cause an error since
that would result in accessing invalid memory, otherwise just
ignore the extra bytes.
Link: https://lore.kernel.org/linux-bluetooth/20260602204749.210857-1-luiz.dentz@gmail.com/T/#u
Fixes: d3f7d17960 ("Bluetooth: MGMT: validate Add Extended Advertising Data length")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 171022c7d5 upstream.
Commit eac69475b0 ("media: rc: igorplugusb: heed coherency
rules") changed the control request storage from an embedded struct to
an allocated pointer so it can obey DMA coherency rules.
However, the driver still passes &ir->request to usb_fill_control_urb().
That points the URB setup packet at the pointer field itself rather than
at the allocated struct usb_ctrlrequest.
USB core then interprets pointer bytes as the setup packet. This can
produce an invalid bRequestType and trigger the control direction warning
reported by syzbot:
usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0
Pass ir->request itself as the setup packet.
Fixes: eac69475b0 ("media: rc: igorplugusb: heed coherency rules")
Reported-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=11f0e4f957c7c3bf3d51
Tested-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5.5
Signed-off-by: Henri A <contact@henrialfonso.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77098e4bea upstream.
The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is
responsible for releasing the tp_vars reference it holds. However, the
existing logic for coordinating this release with batadv_tp_stop_all() was
flawed.
timer_shutdown_sync() guarantees the timer will not fire again after it
returns, but it returns non-zero only when the timer was pending at the
time of the call. If the timer had already expired (and
batadv_tp_stop_all() would unsucessfully try to rearm itself),
batadv_tp_stop_all() skips its batadv_tp_vars_put(), and
batadv_tp_receiver_shutdown() fails to put its own reference as well.
Fix this by introducing a new atomic variable receiving that is set to 1
when the receiver is initialized and cleared atomically with atomic_xchg()
by whichever side claims it first. Only the side that observes the
transition from 1 to 0 is responsible for releasing the tp_vars timer
reference, eliminating the uncertainty.
Cc: stable@kernel.org
Fixes: 3d3cf6a731 ("batman-adv: stop tp_meter sessions during mesh teardown")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 646ebdd310 upstream.
We have to report ENOMEM if no buffer is allocated.
Typo dropped a "!". Restore it.
Fixes: 50acaad3d2 ("media: rc: ttusbir: respect DMA coherency rules")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
