Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0020, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: GHW-123P
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB62176831E47899AB98902012D260A@TYUPR06MB6217.apcprd06.prod.outlook.com
In the SPI driver probe, the device should be in the default state, so the
device status check is not necessary. It should be forced to do the
firmware download as I2C device.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20260211030946.2330-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Samsung Galaxy Book3 Pro 360 NP965QFG (subsystem ID 0x144d:0xc1cb)
uses the same Realtek ALC298 codec and amplifier configuration as the
NP960QFG (0x144d:0xc1ca). Apply the same ALC298_FIXUP_SAMSUNG_AMP_V2_4_AMPS
fixup to enable the internal speakers.
Cc: stable@vger.kernel.org
Signed-off-by: Lewis Mason <lewis@ocuru.co.uk>
Link: https://patch.msgid.link/20260210231337.7265-1-lewis@ocuru.co.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:
- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.
We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmmKCo0ACgkQJNaLcl1U
h9AU7Af/Tu4SmEmMFW58Rn6DYPzX6P/eRvRW1wiazt+b3pyO8qPjRxhvpsBtSbVz
/TyhaO90QnBM7+31p6Hes4nHyC5HcOXXRNb/drt26kQmRpJPMH6NErm7Js6LXDyY
Yk/hzfyqG+DOFFlVoh9vnVE4jr1c4Oasqp8+FCzWbx8l1Y4ZgMEj2T7eQdfiowME
ILjislHqjoPPK4ZPCsGtbmVVYhT4+FMJLZaUDsaCLNRyWxVt1vutrWyvI6w6sA7d
9MUIECfE7MtLy1TaZRT2x0we+eWIjV1ji/7LalKmGvLPCSwTSbRh7A25RqZgL1lf
4/g08iQxIG37yEAmImxxqJnjsfS0yg==
=iwVH
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.0
This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:
- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.
We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.
Vendor ID 0x0661 is assigned to Hamamatsu Photonics K.K.,
but is used by iBasso for iBasso DC04U (0x0661:0x0883),
which supports native DSD playback.
This patch adds QUIRK_FLAG_DSD_RAW for iBasso DC04U, enabling
native DSD playback (DSD_U32_BE). The change has been verified
on Arch Linux using mpd and pw-cat.
Signed-off-by: Qihang Guo <v-conet@outlook.com>
Link: https://patch.msgid.link/TYYPR01MB14098529E0BD900921BE6F42CF465A@TYYPR01MB14098.jpnprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly.
Link: https://patch.msgid.link/20260209121212.171430-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The _hda_dsp_stream_put() function now depends on the
snd_hdac_ext_stream_release() interface from SND_HDA_EXT_CORE:
x86_64-linux-ld: vmlinux.o: in function `_hda_dsp_stream_put':
hda-stream.c:(.text+0xfac605): undefined reference to `snd_hdac_ext_stream_release'
Select this symbol the same way the other users do.
Fixes: 89e1d632bb ("ASoC: SOF: Intel: add hda_dsp_stream_pair_get/put helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260209070901.857700-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=001f, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210926172016
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB6217522D0DB6E2C9DF46B56ED265A@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add quirk for the Onkyo SE-300PCIE variant with PCI subsystem ID
(160b:0102). This variant (OK0011) was found in the official Windows
driver packages.
Also, reorder entries and fix the indentation to maintain
consistency.
Signed-off-by: Harin Lee <me@harin.net>
Link: https://patch.msgid.link/20260208133001.680550-1-me@harin.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute and mic-mute LEDs on HP ENVY x360 Convertible 15-es0xxx
(PCI SSID 103c:88b3) do not work with the current driver.
This model requires a combination of COEFBIT and GPIO fixups to
correctly control the LEDs. Introduce a new fixup function
alc245_fixup_hp_envy_x360_mute_led and add a quirk to apply it.
Signed-off-by: Illia Barbashyn <04baril@gmail.com>
Link: https://patch.msgid.link/20260207221955.24132-1-04baril@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The dma-coherent property is used to indicate a device is capable of
coherent DMA operations. On i.MX952, one of EDMA devices support such
feature, in order to support the EDMA device, the memory needs to be
allocated from the DMA device.
Make this driver to support both non dma-coherent and dma-coherent dma
engine.
Remove dma coerce_mask_and coherent() because DMA provider already set it
according to its capability.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260206014805.3897764-5-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a compatible string, clock mapping table and enable the option
'start_before_dma' to support ASRC on the i.MX952 platform.
The clock mapping table is to map the clock sources on i.MX952 to the
clock ids in the driver, the clock ids are for all the clock sources on
all supported platforms.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260206014805.3897764-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a limitation on i.MX952 that dma request is not cleared at the
end of conversion with dma slave mode. Which causes sample is dropped
from the input fifo on the second time if dma is triggered before the
client device and EDMA may copy wrong data from output fifo as the output
fifo is not ready in the beginning.
The solution is to trigger asrc before dma on i.MX952, and add delay to
wait output data is generated then start the EDMA for output, otherwise
the m2m function has noise issues.
So add an option to start ASRC first for M2M before ASRC is enabled on
i.MX952.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260206014805.3897764-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new compatible string 'fsl,imx952-asrc' for i.MX952 platform,
below are the differences that make this ASRC not fallback compatible
with other platforms.
1) There is a power domain on i.MX952 for the wakeupmix system where
ASRC is in. But it is enabled by default, ASRC device don't need
to enable it, so it is optional for i.MX952.
2) The clock sources of ASRC are different on i.MX952.
3) There is a limitation on i.MX952 that DMA request is not cleared at the
end of conversion with dma slave mode. Which causes sample is dropped from
the input fifo on the second time if DMA is triggered before the client
device and DMA may copy wrong data from output fifo as the output fifo is
not ready in the beginning. So there is specially handling in the driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260206014805.3897764-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to assign "uctl" to itself. Delete it.
Fixes: 55f98ece99 ("ALSA: oss: Relax __free() variable declarations")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aYXvm2YoV2yRimhk@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Sebastian Reichel <sebastian.reichel@collabora.com>:
I'm currently working on DisplayPort audio support for the Rockchip
RK3588/RK3576 SoCs, which preferrably use S/PDIF as DAI source.
Apparently the upstream Rockchip S/PDIF driver is lacking a couple of
features right now, which are necessary to get things going (i.e.
setting the sysclk from the machine driver). I found the missing bits
in Rockchip's 6.1 BSP kernel and ported them over. This series effectly
brings the mainline kernel on-par with the BSP driver, but also contains
a couple of cleanup patches of my own to bring the driver to the modern
age.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Some new Dell models use spare pins on the amp as a binary integer
value to indicate the speaker type. The driver must use this to
select the correct firmware files for the hardware.
Patch #1 is the new support.
The other patches are for KUnit testing.
Convert the driver to use FIELD_PREP to increase readability.
This also fixes an issue that the SDPIF_CFGR_VDW_MASK was wrong,
which didn't have any effects as the only user in the driver
updates the other bits at the same time.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-10-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Treat 32 bit sample width as if it was 24 bits using only the
24 most significant bits.
[I've merged the channel-swapping fix from Zohn Ni into Sugar Zhang's
patch introducing the problem in the first place]
Co-developed-by: Zohn Ni <zohn.ni@rock-chips.com>
Signed-off-by: Zohn Ni <zohn.ni@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-8-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver mixes device managed resources with unmanaged ones
and (as a lot of them do) gets the order wrong resulting in
potential race condition problems at module removal time. Let's
go to full device managed resources to cleanup the code and get
rid of the potential race condition.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-3-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move rk_spdif_match DT compatible table to the usual place before the
platform-driver struct definition and drop the useless of_match_ptr(),
since it is fine to reference the DT id table even when OF support is
disabled (which makes the driver useless anyways).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-2-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use device_get_match_data(), so that the probe routine does not
directly reference the of_match_table. This allows moving the
table at the end of the file where most recent drivers have it.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-1-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
imx_rpmsg_probe() calls snd_soc_find_dai() without holding client_mutex.
However, snd_soc_find_dai() has lockdep_assert_held(&client_mutex)
indicating callers must hold this lock, as the function iterates over the
global component list.
All other callers of snd_soc_find_dai() either hold client_mutex via the
snd_soc_bind_card() path or use the snd_soc_find_dai_with_mutex() wrapper.
Use snd_soc_find_dai_with_mutex() instead to fix the missing lock
protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205052429.4046903-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KUnit test cases for:
- cs35l56_process_xu_properties() which reads the onchip GPIO definitions.
- cs35l56_set_fw_name() calls functions to configure and set the GPIOs.
- cs35l56_set_fw_name() saves the ID value in cs35l56_priv.speaker_id.
- cs35l56_set_fw_name() does not overwrite a speaker ID that was already
found some other way.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KUnit testing of:
cs35l56_check_and_save_onchip_spkid_gpios()
cs35l56_configure_onchip_spkid_pads()
cs35l56_read_onchip_spkid()
The test consists of:
- A mock regmap that simulates the pad and pin config registers.
- Parameterization of the pin list, pulls list, a simulated value for
each pin and the speaker ID value that this should produce.
- A self-test of the simulated pin and GPIO registers.
- A test that the value returned by cs35l56_read_onchip_spkid() is
correct.
- A test that the pin pull-up/down are set correctly by
cs35l56_configure_onchip_spkid_pads()
- A test that cs35l56_configure_onchip_spkid_pads() and
cs35l56_read_onchip_spkid(0 return the expected values if
cs35l56_base->num_onchip_spkid_gpios == 0.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() saves
the configuration.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects
illegal GPIO numbers.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects
illegal pull types.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using the state of pins on the amplifier to indicate
the type of speaker fitted.
Previously, where there were alternate speaker vendors, this was
indicated using host CPU GPIOs.
Some new Dell models use spare pins on the CS35L63 as GPIOs for the
speaker ID detection.
Cirrus-specific SDCA Disco properties provide a list of the pins to be
used, and pull-up/down settings for the pads. This list is ordered,
MSbit to LSbit.
The code to set the firmware filename has been modified to check for
using chip pins for speaker ID. The entire block of code to set
firmware name has been moved out of cs35l56_component_probe() into
its own function to make it easier to KUnit test.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Smatch detects this resource leak:
sound/soc/codecs/cs4271.c:548 cs4271_soc_resume() warn:
'cs4271->clk' from clk_prepare_enable() not released on lines: 540,546.
Instead of direct returns, unprepare the clock and disable regulators on
the error paths.
Fixes: cf6bf51b53 ("ASoC: cs4271: Add support for the external mclk")
Fixes: 9a397f4736 ("ASoC: cs4271: add regulator consumer support")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260110195337.2522347-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The series adds support for echo reference functionality by allowing
the capturing of playback audio right before it leaves the DSP.
For this to work correctly we need a virtual DAI that is also connected
to the echo reference capture device and in absence of playback a
signal generator generates silence to allow the capture to run.
When the real playback starts, application will start to receive the
playback audio to be usable for echo reference.
Merge series from Sen Wang <sen@ti.com>:
This series adds asynchronous mode support to the McASP driver, which
enables independent configuration of bitclocks, frame sync, and audio
configurations between tx(playback) and rx(record). And achieves
simultaneous playback & record using different audio configurations.
It also adds two clean up patches to the McASP driver that disambiguate
and simplifies the logic which avoids the async enhancement from being
too convoluted to review and analyze.
The implementation is based on vendor documentation and patches tested in
both SK-AM62P-LP (sync mode, McASP slave) and AM62D-EVM
(async mode, McASP master, rx & tx has different TDM configs).
Testing verifies async mode functionality while maintaining backward
compatibility with the default sync mode.
Bootlog and Async mode tests on AM62D-EVM: [0]
[0]: https://gist.github.com/SenWang125/f31f9172b186d414695e37c8b9ef127d
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
A bit of a mixed bag of minor misc fixes, improve handling
of volatile SDCA Controls, make some minor bug fixes to jack
detect, improve the cache syncing by adding some more defaults,
and improve some FDL error messages.
McASP has dedicated clock & frame sync registers for both transmit
and receive. Currently McASP driver only supports synchronous behavior and
couples both TX & RX settings.
Add logic that enables asynchronous mode via ti,async-mode property. In
async mode, playback & record can be done simultaneously with different
audio configurations (tdm slots, tdm width, audio bit depth).
Note the ability to have different tx/rx DSP formats (i2s, dsp_a, etc.),
while possible in hardware, remains to be a gap as it require changes
to the corresponding machine driver interface.
Existing IIS (sync mode) and DIT mode logic remains mostly unchanged.
Exceptions are IIS mode logic that previously assumed sync mode, which has
now been made aware of the distinction. And shared logic across all modes
also now checks for McASP tx/rx-specific driver attributes. Those
attributes have been populated according to the original extent, ensuring
no divergence in functionality.
Constraints no longer applicable for async mode are skipped.
Clock selection options have also been added to include rx/tx-only clk_ids,
exposing independent configuration via the machine driver as well.
Note that asynchronous mode is not applicable for McASP in DIT mode,
which is a transmitter-only mode to interface w/ self-clocking formats.
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-5-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the mcasp_set_clk_pdir caller convention in start/stop stream
function, to make it so that set_clk_pdir gets called regardless when
stream starts and also disables when stream ends.
Functionality-wise, everything remains the same as the previously skipped
calls are now either correctly configured
(when McASP is SND_SOC_DAIFMT_BP_FC - pdir needs to be enabled)
or called with a bitmask of zero (when McASP is SND_SOC_DAIFMT_BC_FC - pdir
gets disabled).
On brief regarding McASP Clock and Frame sync configurations, refer to [0].
[0]:TRM Section 12.1.1.4.2 https://www.ti.com/lit/ug/sprujd4a/sprujd4a.pdf
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-4-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current mcasp_is_synchronous() function does more than what it
proclaims, it also checks if McASP is a frame producer.
Therefore split the original function into two separate ones and
replace all occurrences with the new equivalent logic.
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-3-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McASP supports the independent configuration of TX & RX clk and frame
sync registers. By default, the driver is configured in synchronous mode
where RX clock generator is disabled and it uses transmit clock signals as
bit clock and frame sync. Therefore add optional properties needed for
asynchronous mode.
Add ti,async-mode boolean binding to provide a way to decouple the default
behavior and allows for independent TX & RX clocking.
Add tdm-slots-rx uint32 binding to provide an alternative hardware
specifier stating the number of RX serializers.
The existing property tdm-slots will still dictate number of
TX serializers, and RX if tdm-slots-rx isn't given for backwards
compatibility.
Add auxclk-fs-ratio-rx which allows to specify the ratio just for RX.
The driver can be supplied with two different ratios
(auxclk-fs-ratio and auxclk-fs-ratio-rx in tandem) and achieve two
different sampling rates for tx & rx.
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-2-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A bunch more small fixes here, plus some more of the constant stream of
quirks. The most notable change here is Richard's change to the cs_dsp
code for the KUnit tests which is relatively large, mostly due to
boilerplate. The tests were triggering large numbers of error messages
as part of verifying that problems with input data are appropriately
detected which in turn caused runtime issues for the framework due to
the performance impact of pushing the logging out, while the logging is
valuable in normal operation it's basically useless while doing tests
designed to trigger it so rate limiting is an appropriate fix.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmmDa7YACgkQJNaLcl1U
h9DImgf/adXRBuSZyBM0Te40IJfFI4x6sqQlwyaOOeOwe6OLBl6MswWCK8l2Z5MZ
F6wWM/oSlwtwPuVzSL8pM4NA5mZxyxX+naccFZUVvbsOfPypc4cYLjG6P1XOv/ET
On1UKDTkjSy12Ubq9apYguwmztj2AU4C4b3lZbuicX4S7ayAiCpR+c5sv2u/7Myl
pssr1Q83dwi1LTK4+42KUdtPzXfL7VTBh5yVDF7yHuaT3e+yzNWus9/w/Xq2JS4d
OMShgAyWsM2yUYNVEFAEV2wrWpACgJeQXNcidCDnP3ayaJoFU9dEDPJTjBLD0+k+
fWVZmbK9+BviCqtT5fYkzyg/hDrKBA==
=gzU5
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.19
A bunch more small fixes here, plus some more of the constant stream of
quirks. The most notable change here is Richard's change to the cs_dsp
code for the KUnit tests which is relatively large, mostly due to
boilerplate. The tests were triggering large numbers of error messages
as part of verifying that problems with input data are appropriately
detected which in turn caused runtime issues for the framework due to
the performance impact of pushing the logging out, while the logging is
valuable in normal operation it's basically useless while doing tests
designed to trigger it so rate limiting is an appropriate fix.
Prevent the user from both updating the Selected Mode control
whilst the jack is not present, and from writing values that don't
correspond to a valid jack type (Unknown, in progress, etc.).
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-7-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some of the SDCA Controls have a defined reset value in the
specification. Update the parsing to add these specification defined
values into the regmap defaults array. This will reduce the number of
registers that are synchronised on a cache sync.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-6-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
It is helpful to have something in the log showing which firmware file
was loaded by the driver. Update the existing FDL disk file debug
statement to just note that a disk file rather than ACPI file was used,
and add a new info printk that prints out the details of the loaded file
regardless of where that file came from. Likewise, sometimes it is
useful to get a message if the file-sets list is missing, although this
isn't technically an error so make it a debug.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-5-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
