When probe fails due to unclear interrupt status register, it returns
a positive number instead of the proper error code. Fix this accordingly.
Fixes: e6cbbe4294 ("pinctrl: Add Cypress cy8c95x0 support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202602271847.vVWkqLBD-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add system suspend and resume capabilities to the common Realtek pinctrl
library. This enables saving and restoring pin configurations during the
noirq phase for SoCs that define register ranges.
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Correct the grammar in dev_err() messages. Change "Not support <feature>..."
to "<feature> unsupported..." to improve readability and comply with
standard English usage.
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Convert the error handling code in probe() to use dev_err_probe() to
enhance semantic meaning.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Simplify the probe() function by switching to devm-managed versions of
ioremap and pinctrl registration.
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Treating unsupported configurations as errors causes upper layers (like the
GPIO subsystem) to interpret optional features as hard failures, aborting
operations or printing unnecessary error logs.
For example, during gpiod_get(), the GPIO framework attempts to set
PIN_CONFIG_PERSIST_STATE. Since this driver does not support it, false
error reports are generated in dmesg.
Fix this by returning -ENOTSUPP and demoting the log level to dev_dbg.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Insert a "*" in the kernel-doc line to resolve a warning:
Warning: drivers/pinctrl/nxp/pinctrl-s32.h:18 bad line: this group.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Dong Aisheng <Aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The parse_dt_cfg() uses OF and fwnode APIs. Fix this inconsistency by
fully switching it to use fwnode API and rename the function accordingly.
While at it, add missing linux/property.h inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
i.MX95 SCMI firmware is only present on NXP i.MX94 and i.MX95 SoCs.
Hence add a dependency on ARCH_MXC, to prevent asking the user about
this driver when configuring a kernel without NXP i.MX SoC family
support.
While at it, relax the dependencies on ARM_SCMI_PROTOCOL and OF when
compile-testing.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Pinctrl is responsible for bias settings and possibly other pin config,
so call gpiochip_generic_config to apply such config values. This might
also include settings that pinctrl does not support, but then it can
return ENOTSUPP as appropriate.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Linus Walleij <linusw@kernel.org>
In mpfs_pinctrl_probe(), when pctrl->regmap fails, it just print out an
error message without return, which could lead serious errors.
Fixes: 488d704ed7 ("pinctrl: add polarfire soc mssio pinctrl driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
When applying a pinctrl state, -EPROBE_DEFER may be returned if
dependencies are not ready and the consumer will retry probing.
This is normal probe ordering behaviour and not a real error.
However, pinctrl core currently logs:
"Error applying setting, reverse things back"
even when the return value is -EPROBE_DEFER, resulting in noisy
boot-time error messages.
Replace dev_err() with dev_err_probe() to handle -EPROBE_DEFER
consistently and suppress error logging for deferred probes.
No functional change intended.
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Correct an enum name in a kernel-doc comment to avoid kernel-doc
warnings:
Warning: include/linux/pinctrl/pinconf-generic.h:161 Enum value
'PIN_CONFIG_SKEW_DELAY_OUTPUT_PS' not described in enum 'pin_config_param'
Warning: include/linux/pinctrl/pinconf-generic.h:161 Excess enum value
'@PIN_CONFIG_SKEW_DELAY_OUPUT_PS' description in 'pin_config_param'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Fix three possible resource leaks by using the devres version of
clk_prepare_enable(). Also, update error message accordingly.
Detected by Smatch:
drivers/pinctrl/pinctrl-pic32.c:2211 pic32_pinctrl_probe() warn:
'pctl->clk' from clk_prepare_enable() not released on lines: 2208.
drivers/pinctrl/pinctrl-pic32.c:2274 pic32_gpio_probe() warn:
'bank->clk' from clk_prepare_enable() not released on lines: 2264,2272.
Fixes: 2ba384e6c3 ("pinctrl: pinctrl-pic32: Add PIC32 pin control driver")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Even though the type of the 'groups' property of a pinmux node is
specified as string-array in pinmux-node.yaml, but trying to use
multiple strings causes dtbs_check warnings.
For example, checking the following dts ...
$ cat arch/arm64/boot/dts/marvell/armada-3720-test.dts
/dts-v1/;
#include "armada-372x.dtsi"
&pinctrl_nb {
pwm-gpio-pins {
groups = "pwm0", "pwm1", "pwm2", "pwm3";
function = "gpio";
};
};
... results in this warning:
arch/arm64/boot/dts/marvell/armada-3720-test.dtb: pinctrl@13800 (marvell,armada3710-nb-pinctrl): pwm-gpio-pins:groups: ['pwm0', 'pwm1', 'pwm2', 'pwm3'] is too long
from schema $id: http://devicetree.org/schemas/pinctrl/marvell,armada3710-xb-pinctrl.yaml
Add the missing 'items' keyword to the schema to allow using multiple
strings without such warnings. Also adjust the indentation of the next
statements accordingly.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: c1c9641a04 ("dt-bindings: pinctrl: Convert marvell,armada-3710-(sb|nb)-pinctrl to DT schema")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add the match data for the pinctrl found in the EyeQ6Lplus OLB. The pin
control is identical in function to the one present in the EyeQ5 but
has a single bank of 32 pins.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Instead of using the pin descriptions, pin functions and register offsets
of the EyeQ5 directly, access those via a pointer to a newly introduced
struct eq5p_match_data.
This structure contains, in addition to the pin descriptions and pin
functions, an array of pin banks. Each bank holds the number of pins
and the register offsets.
All functions accessing a pin now use a pointer to a bank structure and
an offset inside that bank. The conversion from a pin number to a bank
and an offset is done in the new function eq5p_pin_to_bank_offset(),
which replace eq5p_pin_to_bank() and eq5p_pin_to_offset().
All the data related to the EyeQ5 is declared with the eq5p_eyeq5_
prefix to distinguish it from the common code.
During the probe, we use the parent OF node to get the match data.
We cannot directly use an OF node since pinctrl-eyeq5 is an auxiliary
device of clk-eyeq.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Many of the possible pincfg properties are not compatible with one
another, either because they represent mutually exclusive states for a
pin or because they provide the same information in different units.
Add some simple restrictions to prevent invalid configurations.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Some pinconf properties are mutually exclusive, either because they
convey the same information in different units or represent incompatible
configurations of the same pin. Attempt, in two ways, to prevent these
situations.
Firstly, for enable/disable properties, produce an error if both are
set. Since enable/disable properties share the same enum value, they can
be trivially checked via the newly added bitmap. Having both enable and
disable for the same config makes no sense at all, so produce an error
in this case.
For interactions between properties, doing them outside the loop makes
more sense as it can be evaluated once. In case there are some edge
cases that would be broken by producing an error, only warn for now.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
We have three ID tables spread over the driver code. Move all of them
closer to the end of the file where the first user appears to be. With
that done, drop unneeded trailing commas.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The I²C ID table is a subject to new entries that may potentially
break the order of the existing ones. Avoid this by using string
literals for the chip naming. Note, linker will deduplicate same
string literals and use only a single copy, hence it won't be the
change in size in data section.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The 'name' is only assigned and never used. Drop it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
For all these years of driver existence the driver_data has been used
only as a raw material for other fields in the struct cy8c95x0_pinctrl.
Move it from the structure to be just a local variable in ->probe().
Later, if ever need arises, we may reconsider that.
While at it, drop an unneeded validation and replace uintptr_t with plain
unsigned long which is more readable and works in the same way.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The pin control core is covered to report any error via message.
The devm_request_threaded_irq() already prints an error message.
Remove the duplicates.
While at it, drop the info message as the same information about
an IRQ in use can be retrieved differently.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use devm_mutex_init() since it brings some benefits when
CONFIG_DEBUG_MUTEXES is enabled.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
This driver currently only supports builds against a PIC32 target. Now
that commit b8694faa1a ("pinctrl: pic32: update include to use pic32.h
from platform_data") is merged, it's possible to compile this driver on
other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Address the following warning from checkpatch.pl:
ERROR: need consistent spacing around '+' (ctx:WxV)
Fixes: 2ba384e6c3 ("pinctrl: pinctrl-pic32: Add PIC32 pin control driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Address the following warning from checkpatch.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Fixes: 2ba384e6c3 ("pinctrl: pinctrl-pic32: Add PIC32 pin control driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Glymur is a codename of Qualcomm SoC, not an acronym.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add pinctrl driver for TLMM block found in the Eliza SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Document the Top Level Mode Multiplexer on the Eliza Platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add "ti,am62l-padconf" compatible string for the AM62L SoC, which
requires register configurations to be restored during system resume
after suspend to RAM (RTC only + DDR mode). This reuses the j7200
configuration which includes the PCS_CONTEXT_LOSS_OFF flag needed for
proper restoration.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Kendall Willis <k-willis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The grammar is off. This fixes it.
Fixes: 6e4f3db8df ("pinctrl: just return if no valid maps")
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add pinctrl support for the RV1103B.
Based on the 5.10 Rockchip vendor kernel driver.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Document the compatible string for the RV1103B SoC.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaZtg+xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOKwQ+AQCiXEYAibl3vHRgQo7qEPCC5or4FtkF
HZ0ERRArhsU17AD/TKHE/AJkyFrwK4rGTb6I9Wi1OXnpG7jihZlYjj03Ag4=
=CUql
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fixes from Eric Biggers:
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: fix build error by adding fsverity_readahead() stub
fsverity: remove fsverity_verify_page()
f2fs: make f2fs_verify_cluster() partially large-folio-aware
f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster()
Fix a big endian specific issue in the PPC64-optimized AES code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaZtiphQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK/z2AQD1j15Ao3iDW3yBSyTS+tFJaRUVDtjg
bNostoNJAjMM9wD/X0oAnt95WTNkdHexs+2aMzQ4ULKFRcwQrUTarKx7IgY=
=Dmfx
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix a big endian specific issue in the PPC64-optimized AES code"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc/aes: Fix rndkey_from_vsx() on big endian CPUs
Stephen retired and stepped back from -next maintainership, update his
entry in CREDITS to recognise his 18 years of hard work making it what
it is today and all the impact it's had on our development process.
Also update to his current GnuPG key while we're here.
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The x509 public key code gained a dependency on the sha256 hash
implementation, causing a rare link time failure in randconfig
builds:
arm-linux-gnueabi-ld: crypto/asymmetric_keys/x509_public_key.o: in function `x509_get_sig_params':
x509_public_key.c:(.text.x509_get_sig_params+0x12): undefined reference to `sha256'
arm-linux-gnueabi-ld: (sha256): Unknown destination type (ARM/Thumb) in crypto/asymmetric_keys/x509_public_key.o
x509_public_key.c:(.text.x509_get_sig_params+0x12): dangerous relocation: unsupported relocation
Select the necessary library code from Kconfig.
Fixes: 2c62068ac8 ("x509: Separately calculate sha256 for blacklist")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Align to the commit bf4afc53b7 ("Convert 'alloc_obj' family to use the
new default GFP_KERNEL argument") update the 'kmalloc_obj' declaration
for userspace to fix below compile error:
In file included from arch/arm/boot/compressed/../../../../lib/decompress_unxz.c:241,
from arch/arm/boot/compressed/decompress.c:56:
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'xz_dec_init':
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c:787:28: error: implicit declaration of function 'kmalloc_obj'; did you mean 'kmalloc'? [-Wimplicit-function-declaration]
787 | struct xz_dec *s = kmalloc_obj(*s);
| ^~~~~~~~~~~
| kmalloc
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Fixes: bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0.
- Fix 'objtool' warning for Rust 1.84.0.
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0.
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate).
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust 1.95.0.
-----BEGIN PGP SIGNATURE-----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=DOG1
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0
- Fix 'objtool' warning for Rust 1.84.0
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate)
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust
1.95.0"
* tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: list: Add unsafe blocks for container_of and safety comments
rust: pin-init: replace clippy `expect` with `allow`
rust: irq: add `'static` bounds to irq callbacks
objtool/rust: add one more `noreturn` Rust function
rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0
