To make things uniform with other Qualcomm platforms, move the CPU idle
states under their PSCI power domains. No functional change.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251010-topic-x1e_dt_idle-v1-1-b1c8d558e635@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the HAMOA-IOT-EVK board only 2 out of 4 speakers were functional.
Unlike the CRD, which shares a single GPIO reset line for WSA1/2,
this board provides a dedicated GPIO reset for each WSA, resulting
in 4 separate reset lines.
Update the device tree accordingly so that all 4 speakers can
playback audio as expected.
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251010033728.1808133-1-le.qi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The regions are larger than currently described. Rather inconveniently,
some control registers, including some related to USB4, are in that
left-out chunk.
Extend it to cover the entire region, as per the hw specification.
Fixes: 1940c25eaa ("arm64: dts: qcom: x1e80100: Add display nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251009-topic-hamoa_dp_reg-v1-1-4c70afa5f029@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The config_noc interconnect should use SLAVE_QUP_0.
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251009090718.32503-1-wojciech.slenska@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the venus node so that the video encoder/decoder will start
working.
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251009-otter-further-bringup-v2-6-5bb2f4a02cea@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It seems we also need to reserve a region of 81 MiB called "removed_mem"
otherwise we can easily hit memory errors with higher RAM usage.
Fixes: 249666e34c ("arm64: dts: qcom: add QCM6490 SHIFTphone 8")
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251009-otter-further-bringup-v2-3-5bb2f4a02cea@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As with all other devices in commit 7747a49db7 ("arm64: dts: qcom:
sc7280-*: Remove thermal zone polling delays"), apply the same change to
this device as the delays are assumed to be equal to "0" if not set.
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251009-otter-further-bringup-v2-2-5bb2f4a02cea@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Make sure the nodes are sorted correctly, and the indentation is
correct.
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251009-otter-further-bringup-v2-1-5bb2f4a02cea@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree for Huawei MateBook E 2019, which is a 2-in-1 tablet based
on Qualcomm's sdm850 platform.
Supported features:
- ADSP, CDSP and SLPI
- Volume Key
- Power Key
- Tablet Mode Switching
- Display
- Touchscreen
- Stylus
- WiFi [1]
- Bluetooth [2]
- GPU
- USB
- Keyboard
- Touchpad
- UFS
- SD Card
- Audio (right internal mic and headphone mic not working)
- Mobile Network
[1] WiFi probing log:
ath10k_snoc 18800000.wifi: Adding to iommu group 12
ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001
ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b fw_build_timestamp 2018-07-19 12:28 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
[2] Bluetooth probing log:
Bluetooth: hci0: setting up wcn399x
Bluetooth: hci0: QCA Product ID :0x0000000a
Bluetooth: hci0: QCA SOC Version :0x40010214
Bluetooth: hci0: QCA ROM Version :0x00000201
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x02140201
Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
Bluetooth: hci0: QCA Downloading qca/crnv21.bin
Bluetooth: hci0: QCA setup on UART is completed
Features not supported yet:
- Panel Backlight
- Lid Detection
- Battery
- EFI Variable Access
- Cameras
1. Panel backlight, lid detection and battery will be supported with the
EC driver upstreamed.
2. EFI variables can only be read with the QSEECOM driver, and will be
enabled when the driver is fixed.
3. Cameras are tested to work with modified downstream driver, and once
drivers for these camera modules are included in the tree, cameras can
be enabled.
Features won't be supported:
- External Display
- Fingerprint
1. To make external display work, more reverse engineering may be required,
but it's beyond my ability.
2. Fingerprint is controlled by TrustZone, meaning direct access to it
isn't possible.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251008130052.11427-3-newwheatzjz@zohomail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add compatible for the sdm850-based tablet Huawei MateBook E 2019 using
its codename "planck".
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com>
Link: https://lore.kernel.org/r/20251008130052.11427-2-newwheatzjz@zohomail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Relocate the wake-gpios and perst-gpios properties from the pcie0
controller node to the pcieport0 node. These GPIOs are associated with
the PCIe root port and should reside under the pcieport0 node.
Also rename perst-gpios to reset-gpios to match the expected property name
in the PCIe port node.
Fixes: 141714e163 ("arm64: dts: qcom: sm8750-mtp: Add WiFi and Bluetooth")
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251008-sm8750-v1-1-daeadfcae980@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The UFS device is ovbiously dma coherent like the other IOMMU devices
like usb, mmc, ... let's fix this by adding the flag.
To be sure an extensive test has been performed to be sure it's
safe, as downstream uses this flag for UFS as well.
As an experiment, I checked how the dma-coherent could impact
the UFS bandwidth, and it happens the max bandwidth on cached
write is slighly highter (up to 10%) while using less cpu time
since cache sync/flush is skipped.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007-topic-sm8650-upstream-ufs-dma-coherent-v1-1-f3cfeaee04ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the correct compatible for this phone with standard Qualcomm
firmware and remove references to power-domains from a 'reserved' node.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250930-sc7280-dts-misc-v1-5-5a45923ef705@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the correct compatible for this phone with standard Qualcomm
firmware and remove references to power-domains from a 'reserved' node.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250930-sc7280-dts-misc-v1-4-5a45923ef705@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the correct compatible for this phone with standard Qualcomm
firmware and remove references to power-domains from a 'reserved' node.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250930-sc7280-dts-misc-v1-3-5a45923ef705@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the OLED power supplies to the simple-framebuffer node, so that
the regulators don't get turned off while the simple-fb is being used.
Fixes: c365a02615 ("arm64: dts: qcom: qcm6490-fairphone-fp5: Enable display")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250930-sc7280-dts-misc-v1-1-5a45923ef705@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Like on other platforms, if the OS does not support recovering the state
left by the bootloader it needs access to MDSS_CORE, so that it can
clear the MDSS configuration. Add a reference to the relevant reset.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # RB5
Link: https://lore.kernel.org/r/20250930-sm8250-mdss-reset-v1-1-a64522d91f12@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Radxa Dragon Q6A is a single board computer, based on the Qualcomm
QCS6490 platform.
Features enabled and working:
- Configurable I2C/SPI/UART from 40-Pin GPIO
- Three USB-A 2.0 ports
- RTL8111K Ethernet connected to PCIe0
- eMMC module
- SD card
- M.2 M-Key 2230 PCIe 3.0 x2
- Headphone jack
- Onboard thermal sensors
- QSPI controller for updating boot firmware
- ADSP remoteproc (Type-C and charging features disabled in firmware)
- CDSP remoteproc (for AI applications using QNN)
- Venus video encode and decode accelerator
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xilin Wu <sophon@radxa.com>
Link: https://lore.kernel.org/r/20250929-radxa-dragon-q6a-v5-2-aa96ffc352f8@radxa.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Radxa Dragon Q6A is a single board computer, based on the Qualcomm
QCS6490 platform.
Document the top-level compatible for this board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xilin Wu <sophon@radxa.com>
Link: https://lore.kernel.org/r/20250929-radxa-dragon-q6a-v5-1-aa96ffc352f8@radxa.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Unlike UX3407QA with WCN6855, UX3407RA comes with WCN7850. Definitions
were not added during initial bringup due to lack of hardware to test
it. Add missing definitions that were now confirmed to work.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex@vinarskis.com>
Link: https://lore.kernel.org/r/20250927-zenbook-improvements-v3-3-d46c7368dc70@vinarskis.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The laptop comes in two variants:
* UX3407RA, higher end, FHD+ OLED or WOXGA+ OLED panels
* UX3407QA, lower end, FHD+ OLED or FHD+ LCD panels
Even though all three panels work with "edp-panel", unfortunately the
brightness adjustmenet of LCD panel is PWM based, requiring a dedicated
device-tree. Convert "x1p42100-asus-zenbook-a14.dts" into ".dtsi" to
allow for this split, introduce new LCD variant. Leave current variant
without postfix and with the unchanged model name, as some distros
(eg. Ubuntu) rely on this for automatic device-tree detection during
kernel installation/upgrade.
As dedicated device-tree is required, update compatibles of OLED
variants to correct ones. Keep "edp-panel" as fallback, since it is
enough to make the panels work.
While at it moving .dts, .dtsi around, drop 'model' from the top level
x1-asus-zenbook-a14.dtsi as well.
Co-developed-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex@vinarskis.com>
Link: https://lore.kernel.org/r/20250927-zenbook-improvements-v3-2-d46c7368dc70@vinarskis.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
X1/X1 Plus variant of the said device comes in either FHD+ OLED or FHD+
LCD panel, and shares the same model number UX3407QA. It appears LCD
panel's brightness adjustment is PWM backlight controlled, so a
dedicated device-tree is required. Introduce dedicated compatibles with
fallback to 'asus,zenbook-a14-ux3407qa' as they are otherwise the same.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Aleksandrs Vinarskis <alex@vinarskis.com>
Link: https://lore.kernel.org/r/20250927-zenbook-improvements-v3-1-d46c7368dc70@vinarskis.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The previous GPIO numbers were wrong. Update them to the correct
ones and fix the label.
Fixes: 288ef8a426 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250927-slider-correct-v1-1-fb8cc7fdcedf@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since max77705 has a register, which indicates interrupt source, it acts
as an interrupt controller.
Direct MAX77705's subdevices to use the IC's internal interrupt
controller, instead of listening to every interrupt fired by the
chip towards the host device.
Fixes: 7a88a931d0 ("arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250926-starqltechn-correct_max77705_nodes-v5-2-c6ab35165534@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Drop the unused address/size-cells properties to silence the DT
checker warning:
pmic@66 (maxim,max77705): '#address-cells', '#size-cells' do not
match any of the regexes: '^pinctrl-[0-9]+$'
Fixes: 7a88a931d0 ("arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250926-starqltechn-correct_max77705_nodes-v5-1-c6ab35165534@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Traditionally, firmware loading for Serial Engines (SE) in the QUP hardware
of Qualcomm SoCs has been managed by TrustZone (TZ). While this approach
ensures secure SE assignment and access control, it limits flexibility for
developers who need to enable various protocols on different SEs.
Add the firmware-name property to QUPv3 nodes in the device tree to enable
firmware loading from the Linux environment. Handle SE assignments and
access control permissions directly within Linux, removing the dependency
on TrustZone.
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250925042605.1388951-1-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Traditionally, firmware loading for Serial Engines (SE) in the QUP hardware
of Qualcomm SoCs has been managed by TrustZone (TZ). While this approach
ensures secure SE assignment and access control, it limits flexibility for
developers who need to enable various protocols on different SEs.
Add the firmware-name property to QUPv3 nodes in the device tree to enable
firmware loading from the Linux environment. Handle SE assignments and
access control permissions directly within Linux, removing the dependency
on TrustZone.
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250924035409.3976652-1-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Traditionally, firmware loading for Serial Engines (SE) in the QUP hardware
of Qualcomm SoCs has been managed by TrustZone (TZ). While this approach
ensures secure SE assignment and access control, it limits flexibility for
developers who need to enable various protocols on different SEs.
Add the firmware-name property to QUPv3 nodes in the device tree to enable
firmware loading from the Linux environment. Handle SE assignments and
access control permissions directly within Linux, removing the dependency
on TrustZone.
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250923161107.3541698-1-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The BQ Aquaris X5 (Longcheer L8910) has a Himax HX852x-ES touchscreen,
which can now be described with the bindings recently added to linux-next.
Add it to the device tree to allow using the touchscreen.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250919-msm8916-l8910-touchscreen-v1-1-c46e56ec0a3b@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update min/max voltage settings for regulators below to align
with the HW specification
vreg_l3b_0p504
vreg_l6b_1p2
vreg_l11b_1p504
vreg_l14b_1p08
vreg_l16b_1p1
vreg_l17b_1p7
vreg_s1c_2p19
vreg_l8c_1p62
vreg_l9c_2p96
vreg_l12c_1p65.
While at it, remove RPMH regulator rails (listed below) as
these are not to be used on APPS, and any client accidently
voting on it can potentially cause issues.
vreg_s2b_0p876
vreg_s2c_0p752
vreg_s5c_0p752
vreg_s7c_0p752
vreg_s10c_0p752
vreg_l4b_0p752
vreg_l5b_0p752.
Signed-off-by: Rakesh Kota <rakesh.kota@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250919-b4-rb3gen2-update-regulator-v1-1-1ea9e70d01cb@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Like on other platforms, if the OS does not support recovering the state
left by the bootloader it needs access to MDSS_CORE, so that it can
clear the MDSS configuration. Add a reference to the relevant reset.
This also fixes display init on Linux v6.17.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250919-sm6350-mdss-reset-v1-3-48dcac917c73@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Remove the 'allow-set-time' property from the rtc node because APPS
is prohibited from setting the hardware RTC time.
Signed-off-by: Tingguo Cheng <tingguo.cheng@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250926-remove-rtc-allow-set-time-v1-1-76895a666939@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM6150 and QCS615 are two names for the same die, collectively known as
'talos'. Follow the example of other platforms and rename SM6150 to
talos.dtsi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250923-rename-dts-v1-3-21888b68c781@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X1E80100 and several other similar names (X1E78100, X1E001DE) all
belong to the platform now known as 'hamoa'. Follow the example of
'lemans' and rename the x1e80100.dtsi to hamoa.dtsi and
x1e80100-pmics.dtsi to hamoa-pmics.dtsi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250923-rename-dts-v1-2-21888b68c781@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 and QCS8275 are two variants of the same die with no
difference visible to the Linux kernel, which are collectively named as
'monaco'. Rather than trying to using the name, which is not always
relevant, follow the example of 'lemans' and rename qcs8300.dtsi to
monaco.dtsi (and qcs8300-pmics.dtsi to monaco-pmics.dtsi).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250923-rename-dts-v1-1-21888b68c781@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the refgen regulator block and use it for the DSI controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250921-refgen-v1-9-9d93e64133ea@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
