emit_atomic_ld_st() returns 1 to have build_body() skip the zext after
a sub-word load_acquire. The caller does "ret = ret ?:
add_exception_handler(...)", which skips add_exception_handler() on any
non-zero ret, so the extable entry is missing and a faulting
PROBE_ATOMIC load_acquire oopses.
REG_DONT_CLEAR_MARKER leaves rd stale on fault, and the verifier still
thinks the load overwrote it, so a program can leak it through a map.
Check ret >= 0 before calling add_exception_handler(), and pass rd for
LOAD_ACQ so the fault zeroes rd like a PROBE_MEM load. Return ret
unchanged for the zext skip.
Fixes: fb7cefabae ("riscv, bpf: Add support arena atomics for RV64")
Suggested-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260720-bpf-riscv-fix-extable-v4-1-165c0b3b07d5@kylinos.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Pu Lehui says:
====================
Mixing bpf2bpf and tailcalls for RV64
In the current RV64 JIT, if we just don't initialize the TCC in subprog,
the TCC can be propagated from the parent process to the subprocess, but
the updated TCC of the parent process cannot be restored when the
subprocess exits. Since the RV64 TCC is initialized before saving the
callee saved registers into the stack, we cannot use the callee saved
register to pass the TCC, otherwise the original value of the callee
saved register will be destroyed. So we implemented mixing bpf2bpf and
tailcalls similar to x86_64, i.e. using a non-callee saved register to
transfer the TCC between functions, and saving that register to the
stack to protect the TCC value. As for the tailcall hierarchy issue,
inspired by the s390's low-overhead approach, we store TCC from
RV_REG_TCC back to stack after calling bpf2bpf call or calling orig bpf
func in bpf trampoline.
In addition, some code cleans are also attached to this patchset.
Tests test_bpf.ko and test_verifier have passed, as well as the relative
testcases of test_progs*.
v6:
- Add new patch to fix memory leak in bpf_jit_free. (Sashiko)
v5: https://lore.kernel.org/bpf/20260707142219.2871758-1-pulehui@huaweicloud.com
- Fix TCC value was not restored to RV_REG_TCC upon trampoline exit,
resulting in an infinite tail call. (Sashiko)
- Fix epilogue not restored TCC value to RV_REG_TCC, resulting in
leaf tailcall callee may clobbered RV_REG_TCC. (Sashiko)
- Remove patch of `Remove ctx->offset initialization` as it would hit
some corner case. (Sashiko)
- Fix double-count kcfi insn when tailcall to target. (Sashiko)
- Add detail for selftest commit message. (BPF BOT)
v4: https://lore.kernel.org/bpf/20260629140048.733346-1-pulehui@huaweicloud.com
- Fix tailcall hierarchy issue.
- use is_struct_ops_tramp helper in bpf trampoline
v3: https://lore.kernel.org/bpf/20240201083351.943121-1-pulehui@huaweicloud.com
- Remove duplicate RV_REG_TCC load in epiloguei. (Björn Töpel)
v2: https://lore.kernel.org/bpf/20240130040958.230673-1-pulehui@huaweicloud.com
- Fix emit restore RV_REG_TCC double times when `flags &
BPF_TRAMP_F_CALL_ORIG`
- Use bpf_is_subprog helper
v1: https://lore.kernel.org/bpf/20230919035711.3297256-1-pulehui@huaweicloud.com
====================
Link: https://patch.msgid.link/20260708064436.2971933-1-pulehui@huaweicloud.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The RV64 BPF JIT now supports mixing bpf2bpf and tailcalls.
Therefore, the tailcall_bpf2bpf tests can be safely removed
from the riscv64 denylist.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260708064436.2971933-8-pulehui@huaweicloud.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
In the current RV64 JIT, if we just don't initialize the TCC in subprog,
the TCC can be propagated from the parent process to the subprocess, but
the updated TCC of the parent process cannot be restored when the
subprocess exits. Since the RV64 TCC is initialized before saving the
callee saved registers into the stack, we cannot use the callee saved
register to pass the TCC, otherwise the original value of the callee
saved register will be destroyed. So we implemented mixing bpf2bpf and
tailcalls similar to x86_64, i.e. using a non-callee saved register to
transfer the TCC between functions, and saving that register to the
stack to protect the TCC value. As for the tailcall hierarchy issue,
inspired by the s390's low-overhead approach, we store TCC from
RV_REG_TCC back to stack after calling bpf2bpf call or calling orig bpf
func in bpf trampoline.
Tests test_bpf.ko and test_verifier have passed, as well as the relative
testcases of test_progs*.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260708064436.2971933-7-pulehui@huaweicloud.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add RV_TAILCALL_OFFSET macro to format tailcall offset, and correct the
relevant comments.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260708064436.2971933-6-pulehui@huaweicloud.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
When CONFIG_CFI_CLANG is enabled, prog->bpf_func already skips the kcfi
instruction during setup. Including it again in the tailcall jump offset
causes it to jump over an extra 4 bytes, skipping the stack pointer
adjustment, which will result in kernel stack corruption.
Fixes: 30a59cc797 ("riscv, bpf: Fix possible infinite tailcall when CONFIG_CFI_CLANG is enabled")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260708064436.2971933-5-pulehui@huaweicloud.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
It is unnecessary to allocate continuous physical memory for cache
buffer, and when ebpf program is too large, it may cause memory
allocation failure.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260708064436.2971933-4-pulehui@huaweicloud.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts
and calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a
memory leak of the JIT context offsets array.
Fix this by adding the missing kfree(jit_data->ctx.offset) in
bpf_jit_free().
Fixes: 48a8f78c50 ("bpf, riscv: use prog pack allocator in the BPF JIT")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260708064436.2971933-3-pulehui@huaweicloud.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Extract the is_struct_ops_tramp helper, and use it in riscv
as the current checks are somewhat hacky.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260708064436.2971933-2-pulehui@huaweicloud.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
attach_probe/uprobe-lib and uprobe_autoattach selftests fail with "failed
to resolve full path for libc.so.6" on older non-usrmerged distros, where
libc.so.6 lives under a top-level /lib64 or /lib rather than /usr/lib64 or
/usr/lib. Add /lib64:/lib to the search paths, alongside the existing
/usr/lib64:/usr/lib and Debian multiarch entries.
Fixes: 1ce3a60e3c ("libbpf: auto-resolve programs/libraries when necessary for uprobes")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/bpf/20260720-selftests-bpf_fixes-v2-3-b450eda93dfe@suse.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
progs/lsm_bdev.c keys its verity_devices hashmap with the raw kernel dev_t
read straight off bdev->bd_dev, i.e. MKDEV(major, minor) = (major << 20) |
minor. prog_tests/lsm_bdev.c instead builds its lookup key with dev_key =
(__u32)st.st_rdev from stat(2), but the stat(2) syscall fills st_rdev via
the kernel's new_encode_dev(), a different bit layout: (minor & 0xff) |
(major << 8) | ((minor & ~0xff) << 12).
For any device with a non-trivial major these two values differ, so the
lookup can never find what the BPF program stored, and test_lsm_bdev()
always fails with:
test_lsm_bdev:FAIL:map lookup unexpected error: -2 (errno 2)
Reconstruct the raw kernel dev_t from the decoded major/minor instead of
casting st_rdev directly, restoring the layout the BPF program actually
reads.
Fixes: 96f4c251a0 ("selftests/bpf: add block device management selftests")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/bpf/20260720-selftests-bpf_fixes-v2-2-b450eda93dfe@suse.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
After "make install", test_progs fails because two files end up in the
wrong place:
- bpftool: TEST_GEN_PROGS_EXTENDED flattens it into $(INSTALL_PATH), losing
the tools/sbin/ prefix that detect_bpftool_path() expects. Remove it from
TEST_GEN_PROGS_EXTENDED and install it explicitly under tools/sbin/
instead.
- *.BTF: resolve_btfids writes resolve_btfids.test.o.BTF as a side-effect
of the build but INSTALL_RULE never copies it over. Install all *.BTF
files alongside the rest of the per-flavor output.
Fixes: f21fae5774 ("selftests/bpf: Add a few helpers for bpftool testing")
Fixes: 522397d05e ("resolve_btfids: Change in-place update with raw binary output")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/bpf/20260720-selftests-bpf_fixes-v2-1-b450eda93dfe@suse.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Queue and stack pop/peek helpers accept an uninitialized output buffer
because the verifier expects the helper to initialize it. The empty-map
error path clears the buffer, but a failed lock acquisition returns
-EBUSY without writing it.
Clear the output before returning -EBUSY so BPF programs cannot observe
uninitialized stack contents after a failed helper call.
Fixes: a34a9f1a19 ("bpf: Avoid deadlock when using queue and stack maps from NMI")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260719125419.1782196-1-memxor@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
cast_user converts an arena offset into a user address by combining the
low 32 bits of the pointer with the upper 32 bits of user_vm_start, while
keeping a NULL pointer NULL. The current sequence always emits six
instructions: it materializes user_vm_start >> 32 into a register, shifts
it into place, and ORs in the offset.
The upper half of user_vm_start is a constant, so it can be written
directly onto the offset with MOVK. Move the 32-bit offset into dst
(which also zeroes the upper 32 bits), then MOVK the non-zero halfwords
of the upper address, branching over the MOVKs when the offset is zero so
NULL is preserved.
This emits at most four instructions, and only one when the upper half of
user_vm_start is zero. The generated code is equivalent.
Before:
; bpf_addr_space_cast(page1, 1, 0);
7c: mov w10, w8
80: mov w8, #1
84: lsl x8, x8, #32
88: cbz x10, 0xffff800087b80c20
8c: orr x10, x8, x10
90: mov x8, x10
After:
; bpf_addr_space_cast(page1, 1, 0);
7c: mov w8, w8
80: cbz w8, 0xffff800087b80c28
84: movk x8, #1, lsl #32
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/bpf/20260721105921.1070501-1-puranjay@kernel.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Viktor Malik says:
====================
selftests/bpf: Fix compilation with RELEASE=1
When compiling BPF selftests with RELEASE=1 (which most notably adds
-O2), GCC reports several warnings. These are by default treated as
errors and abort the compilation.
This series fixes all of the issues such that selftests can be compiled
with RELEASE=1.
====================
Link: https://patch.msgid.link/cover.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
When compiling BPF selftests with -O2, GCC reports a maybe-uninitialized
warning in libarena code:
In file included from /bpf-next/tools/testing/selftests/bpf/prog_tests/libarena_asan.c:11:
In function ‘libarena_asan_init’,
inlined from ‘run_test’ at /bpf-next/tools/testing/selftests/bpf/prog_tests/libarena_asan.c:59:8,
inlined from ‘test_libarena_asan’ at /bpf-next/tools/testing/selftests/bpf/prog_tests/libarena_asan.c:91:2:
/bpf-next/tools/testing/selftests/bpf/libarena/include/libarena/userspace.h:126:14: error: ‘globals_pages’ may be used uninitialized [-Werror=maybe-uninitialized]
126 | args = (struct asan_init_args){
| ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
127 | .arena_all_pages = arena_all_pages,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
128 | .arena_globals_pages = globals_pages,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
129 | };
| ~
/bpf-next/tools/testing/selftests/bpf/libarena/include/libarena/userspace.h: In function ‘test_libarena_asan’:
/bpf-next/tools/testing/selftests/bpf/libarena/include/libarena/userspace.h:118:13: note: ‘globals_pages’ was declared here
118 | u64 globals_pages;
| ^~~~~~~~~~~~~
Silence the warning by initializing globals_pages to 0.
Fixes: cfc00618b9 ("selftests/bpf: Add ASAN support for libarena selftests")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/9f77a5c05c3c731ab2655fd66716ab9de4478b15.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
When compiling BPF selftests with -O2, GCC reports an array bounds
violation warning in global_map_resize test:
In function ‘global_map_resize_bss_subtest’,
inlined from ‘test_global_map_resize’ at /bpf-next/tools/testing/selftests/bpf/prog_tests/global_map_resize.c:228:3:
/bpf-next/tools/testing/selftests/bpf/prog_tests/global_map_resize.c:64:33: error: array subscript 1 is above array bounds of ‘int[1]’ [-Werror=array-bounds=]
64 | skel->bss->array[i] = 1;
| ~~~~~~~~~~~~~~~~^~~
In file included from /bpf-next/tools/testing/selftests/bpf/prog_tests/global_map_resize.c:6:
./test_global_map_resize.skel.h: In function ‘test_global_map_resize’:
./test_global_map_resize.skel.h:44:21: note: while referencing ‘array’
44 | int array[1];
| ^~~~~
This is a false positive because `array` (a BPF map) has been resized
from within the BPF program. GCC doesn't know that so let us silence the
warning by accessing the array via a plain pointer.
Fixes: 08b0895675 ("libbpf: Selftests for resizing datasec maps")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/57765bc465a27923c3c093eba222cc24d08d8c40.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Replace ASSERT_OK_PTR by ASSERT_NEQ(res, NULL, ...) when checking the
result of malloc. It is more accurate since malloc returns NULL, not an
error code, on failure and it also prevents the following false GCC
warning when compiling BPF selftests with -O2:
In file included from /bpf-next/tools/testing/selftests/bpf/prog_tests/sha256.c:4:
/bpf-next/tools/testing/selftests/bpf/prog_tests/sha256.c: In function ‘test_sha256’:
./test_progs.h:393:22: error: ‘data’ may be used uninitialized [-Werror=maybe-uninitialized]
393 | int ___err = libbpf_get_error(___res); \
| ^~~~~~~~~~~~~~~~~~~~~~~~
/bpf-next/tools/testing/selftests/bpf/prog_tests/sha256.c:28:14: note: in expansion of macro ‘ASSERT_OK_PTR’
28 | if (!ASSERT_OK_PTR(data, "malloc"))
| ^~~~~~~~~~~~~
In file included from /bpf-next/tools/testing/selftests/bpf/tools/include/bpf/bpf.h:32,
from ./test_progs.h:37:
/bpf-next/tools/testing/selftests/bpf/tools/include/bpf/libbpf_legacy.h:113:17: note: by argument 1 of type ‘const void *’ to ‘libbpf_get_error’ declared here
113 | LIBBPF_API long libbpf_get_error(const void *ptr);
| ^~~~~~~~~~~~~~~~
Fixes: f09f57c746 ("selftests/bpf: Add test for libbpf_sha256()")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/f9dec09cca0c2aa5eeb4fdcd400a13aa19e2c073.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Replace ASSERT_OK_PTR by ASSERT_NEQ(res, NULL, ...) when checking the
result of malloc. It is more accurate since malloc returns NULL, not an
error code, on failure and it also prevents the following false GCC
warning when compiling BPF selftests with -O2:
In file included from test_loader.c:6:
test_loader.c: In function ‘verify_stderr’:
/bpf-next/tools/testing/selftests/bpf/test_progs.h:393:22: error: ‘buf’ may be used uninitialized [-Werror=maybe-uninitialized]
393 | int ___err = libbpf_get_error(___res); \
| ^~~~~~~~~~~~~~~~~~~~~~~~
test_loader.c:810:14: note: in expansion of macro ‘ASSERT_OK_PTR’
810 | if (!ASSERT_OK_PTR(buf, "malloc"))
| ^~~~~~~~~~~~~
In file included from /bpf-next/tools/testing/selftests/bpf/tools/include/bpf/bpf.h:32,
from /bpf-next/tools/testing/selftests/bpf/test_progs.h:37:
/bpf-next/tools/testing/selftests/bpf/tools/include/bpf/libbpf_legacy.h:113:17: note: by argument 1 of type ‘const void *’ to ‘libbpf_get_error’ declared here
113 | LIBBPF_API long libbpf_get_error(const void *ptr);
| ^~~~~~~~~~~~~~~~
Fixes: 554e4eb9e4 ("selftests/bpf: Reuse stderr parsing for libarena ASAN tests")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/e25d50805fbcb3632f24b488568ab5ba49b82094.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Looking up a prog or map by name walks the whole id space. There is a
window between bpf_prog_get_next_id()/bpf_map_get_next_id() and getting
an fd for that id in which an unrelated object can be freed, and the
lookup then fails with ENOENT and aborts the whole command.
Skip such ids and keep walking, the same way do_show() already does.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/bpf/20260720071520.396363-1-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Leon Hwang says:
====================
bpf: Disallow interpreter fallback for interpreter-unsupported insns
Sashiko reported two potential issues about interpreter fallback [1]
[2].
After verifying them by patch #7 of v1, I think they are real issues. With
LLM assistance, the interpreter does not support the internal
BPF_PROBE_ATOMIC insn and the gotox insn (used for indirect jumps),
either.
1) the user BPF_ADDR_SPACE_CAST insn
the interpreter just ignores it.
2) the arena ST/STX/LDX insn
the interpreter could hit the BUG_ON() in ___bpf_prog_run().
3) the BPF_MOV64_PERCPU_REG insn
the interpreter could hit page fault, due to loading memory from
invalid __percpu pointer.
4) the internal BPF_PROBE_ATOMIC insn
the interpreter could hit the BUG_ON() in ___bpf_prog_run().
5) the gotox insn used for indirect jumps
the interpreter could hit the BUG_ON() in ___bpf_prog_run(), too.
Reject these insns on interpreter fallback path in
__bpf_prog_select_runtime() by setting 'jit_required = true'.
Link:
[1] https://lore.kernel.org/bpf/20260608151347.2C77D1F00893@smtp.kernel.org/
[2] https://lore.kernel.org/bpf/20260622150759.EC9071F000E9@smtp.kernel.org/
Changes:
v1 -> v2:
* Drop RFC.
* Change target tree to bpf-next to utilize the 'jit_required' bit.
* Set jit_required as true if there's arena map, then all arena-related
insns will be rejected if JIT is not available.
* Set jit_required as true if there's insn_array map, then the gotox
insns will be rejected if JIT is not available.
* Drop the issues-proven patch.
* v1: https://lore.kernel.org/bpf/20260626154330.33619-1-leon.hwang@linux.dev/
====================
Link: https://patch.msgid.link/20260715141122.15783-1-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The BPF_MOV64_PERCPU_REG insn requires JIT to emit native code to for
'dst_reg = src_reg + <percpu_base_off>'.
However, the interpreter ignores the 'off' at its ALU64_MOV_X label.
The 'off' indicates the insn is BPF_MOV64_PERCPU_REG insn. Then, when
the interpreter loads memory from the register, it will hit a page
fault.
[ 2.545572] BUG: unable to handle page fault for address: ffffffffacaaf034
[ 2.546485] #PF: supervisor read access in kernel mode
[ 2.547167] #PF: error_code(0x0000) - not-present page
[ 2.547850] PGD 134e63067 P4D 134e63067 PUD 134e64063 PMD 10021c063 PTE 800ffffeca550062
[ 2.548912] Oops: Oops: 0000 [#1] SMP PTI
Set jit_required as true in order to disallow interpreter fallback in
core.c::__bpf_prog_select_runtime(), if any BPF_ADDR_PERCPU insn is
patched to the prog.
BTW, rename the helper bpf_map_supports_cpu_flags() to
bpf_map_is_percpu_map().
Fixes: 7bdbf74463 ("bpf: add special internal-only MOV instruction to resolve per-CPU addrs")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260715141122.15783-4-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The interpreter does not recognize the BPF_JMP|BPF_JA|BPF_X insn, which
is used for insn_array map. Thereafter, it would hit the BUG_ON() in
___bpf_prog_run() at run time.
[ 2.563726] BPF interpreter: unknown opcode 0d (imm: 0x0)
[ 2.564557] ------------[ cut here ]------------
[ 2.565206] kernel BUG at kernel/bpf/core.c:2349!
[ 2.565882] Oops: invalid opcode: 0000 [#1] SMP PTI
Set jit_required as true when insn_array map is used in the prog in
order to disallow interpreter fallback for gotox insn in
core.c::__bpf_prog_select_runtime().
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260715141122.15783-3-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Since the interpreter does not support the arena-related insns,
interpreter fallback should not be allowed for these insns in
core.c::__bpf_prog_select_runtime().
Currently, when the interpreter executes the arena ST/LDX/STX insns,
it would hit the BUG_ON() in ___bpf_prog_run() at run time.
[ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0)
[ 2.579998] ------------[ cut here ]------------
[ 2.580652] kernel BUG at kernel/bpf/core.c:2349!
[ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI
Set jit_required as true when arena map is used in the prog to disallow
interpreter fallback for arena-related insns.
Fixes: 6082b6c328 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260715141122.15783-2-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Yiyang Chen says:
====================
bpf: Reject arena frees below the arena base
bpf_arena_free_pages() can be called with a scalar arena address. The
runtime reconstructs a full user address from the arena base and the low
32 bits before returning the range to the arena free tree. A scalar one
page below the arena base can otherwise produce an out-of-domain free-tree
offset and make a later allocation return an address below the arena
mapping.
Patch 1 rejects frees whose reconstructed full user address is below
user_vm_start. Patch 2 adds verifier_arena coverage for the
scalar-below-base case.
Changes in v2:
- Add Reviewed-by tags from Emil Tsalapatis.
- Remove the empty inline asm from the selftest.
v1: https://lore.kernel.org/bpf/cover.1782813442.git.chenyy23@mails.tsinghua.edu.cn/
====================
Link: https://patch.msgid.link/20260717-c10-031-public-bpf-next-v2-b4-v2-0-54b555443a7c@mails.tsinghua.edu.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add a verifier_arena case that fills a two-page arena, calls
bpf_arena_free_pages() with a scalar address one page below the arena
base, and then verifies that another allocation is still rejected.
Before the runtime guard, the invalid free can repopulate the free
tree with an out-of-domain offset and the final allocation succeeds.
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717-c10-031-public-bpf-next-v2-b4-v2-2-54b555443a7c@mails.tsinghua.edu.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
bpf_arena_free_pages() accepts scalar arena addresses. The runtime
masks the address to the low 32 bits and reconstructs a full user
address from the arena base before returning the range to the arena
free tree.
When the scalar value is below the low 32 bits of the arena base,
full_uaddr falls below user_vm_start. The existing upper-end clipping
then turns this into an out-of-range free-tree offset. A later
allocation can reuse that offset and return an address below the arena
mapping.
Reject such frees before computing the clipped range.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717-c10-031-public-bpf-next-v2-b4-v2-1-54b555443a7c@mails.tsinghua.edu.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
CONFIG_IPV6_SEG6_LWTUNNEL is currently enabled in each arch-specific
config fragment for the BPF selftests. Commit 33a971d549
("selftests/bpf: Add LWT encap tests for skb metadata") has enabled this
config in the generic config as well, resulting in a small warning when
configuring a kernel for selftests:
$ cat tools/testing/selftests/bpf/{config,config.vm,config.x86_64}>.config
$ make olddefconfig
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/confdata.o
HOSTLD scripts/kconfig/conf
config:269:warning: override: reassigning to symbol IPV6_SEG6_LWTUNNEL
#
# configuration written to .config
#
Now that IPV6_SEG6_LWTUNNEL is set in the general config fragment, drop
it from the arch-specific fragments.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/bpf/20260709-testing-fragments-v1-1-65244b0650ff@bootlin.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Jiayuan Chen says:
====================
bpf: Add memory usage for arena and selftest
arena is the only map type whose map_mem_usage() still returns 0, so
bpftool and fdinfo always show 0 memlock for it no matter how many pages
it holds. This series adds the accounting, runs the arena selftests
serially so they don't OOM a small CI VM, and adds a test for it.
v1 -> v2:
- split the scratch_page -> arena refactor into a prep patch (no
functional change)
- use WRITE_ONCE() for nr_pages to pair with the lockless reader
- reword the "run serially" commit message
- selftest: alloc prog returns 0 so the failure check is reached
v1: https://lore.kernel.org/bpf/20260716142746.8794-1-jiayuan.chen@linux.dev/
====================
Link: https://patch.msgid.link/20260717114117.350851-1-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Allocate and free arena pages, both from BPF and via user-space fault-in,
and check that the map's memlock in fdinfo tracks the number of pages that
are actually populated.
Like the other arena tests it runs serially.
test:
./test_progs -a arena_mem_usage
#5 arena_mem_usage:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717114117.350851-5-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Every arena reserves a 4GB kernel vmalloc region at creation, and on a
KASAN build that eagerly populates ~512MB of shadow memory per arena. When
several arena tests run in parallel their shadow adds up, exhausts the
memory of a small CI VM and trips the OOM killer during map creation.
Make the dedicated arena tests (arena_* and libarena*) serial so they no
longer pile up in the parallel phase. That alone brings the peak number of
live arenas back within the CI memory budget.
A few other tests such as verifier_arena*, stream and compute_live_registers
create an arena too, but they run inside shared RUN_TESTS()/RUN() suites, so
turning them serial would drag many unrelated subtests along with them.
Leave those as-is.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717114117.350851-4-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
arena is the only map type whose map_mem_usage() still returns 0, so
"bpftool map show" and fdinfo always showed 0 memlock for an arena no
matter how many pages it had.
Count the pages that are actually mapped into the arena: bump a counter in
apply_range_set_cb() when a page goes in and drop it in
apply_range_clear_cb() when a page goes out, both under the arena spinlock.
map_mem_usage() then just returns nr_pages << PAGE_SHIFT.
Only real data pages are counted, not the scratch page.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717114117.350851-3-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Replace the scratch_page field in the pte-callback data with the arena
pointer; later patches use other arena fields from these callbacks. No
functional change.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717114117.350851-2-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
check_kfunc_call() reads meta.func_name when bpf_fetch_kfunc_arg_meta()
returns -EACCES, but that error can come from fetch_kfunc_meta() (e.g.
fd_array_get_btf() rejecting BTF binding for a signed program) before
meta is memset(), leaving it uninitialized and risking a garbage deref
in verbose().
Move the memset() to the start of bpf_fetch_kfunc_arg_meta() so meta is
zeroed on every error return. The intended "not allowed" -EACCES path
still sets func_name first, so its message is unchanged.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260715172127.2416388-3-ameryhung@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
For a bloom filter, the value argument of bpf_map_peek_elem() is always
an input. Therefore, the verifier should not allow passing uninitialized
stack memory to it to avoid information leak.
bpf_map_peek_elem() tags its value argument ARG_PTR_TO_MAP_VALUE |
MEM_UNINIT, telling the verifier the callee fills the buffer. This holds
for queue/stack maps, but not for a bloom filter, which reads the buffer
as an input to test set membership and never writes it.
As a result, a program can pass an uninitialized stack buffer to
bpf_map_peek_elem() on a bloom filter. The verifier accepts it and marks
the buffer initialized on return, letting the program read back leftover
kernel stack memory. Bloom maps require CAP_BPF to create, so this is a
CAP_BPF-gated stack infoleak that bypasses the boundary CAP_BPF is meant
to enforce (arbitrary kernel reads are gated behind CAP_PERFMON).
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260715172127.2416388-2-ameryhung@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
- Fix a UAF in socket clone early bailout paths (Matt Bobrowski)
- Reject unhashed UDP sockets on sockmap update to prevent refcount leaks
(Michal Luczaj)
- Account for receive queue data in FIONREAD on sockmap sockets without a
verdict program (Mattia Meleleo)
- Reject negative constant offsets for verifier buffer pointers (Sun Jian)
- Fix for tracing of kfuncs with implicit arguments (Ihor Solodrai)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR0/74CM8h5+1E9pgtHLTd7Y1QvgwUCalp3/AAKCRBHLTd7Y1Qv
g9J/AQCJzidAmStp1i074sZC7sC1uq+aYIvwycpMTp6hVgyP+AEAw7oKcnGkPGXs
jeEDctaLtxBnPMXGAR5UaeqdNqu9ywQ=
=zQgn
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Kumar Kartikeya Dwivedi:
- Fix a UAF in socket clone early bailout paths (Matt Bobrowski)
- Reject unhashed UDP sockets on sockmap update to prevent refcount
leaks (Michal Luczaj)
- Account for receive queue data in FIONREAD on sockmap sockets without
a verdict program (Mattia Meleleo)
- Reject negative constant offsets for verifier buffer pointers (Sun
Jian)
- Fix for tracing of kfuncs with implicit arguments (Ihor Solodrai)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover tracing implicit kfunc args
bpf: Fix tracing of kfuncs with implicit args
selftests/bpf: Cover negative buffer pointer offsets
bpf: Reject negative const offsets for buffer pointers
selftests/bpf: Test FIONREAD on a sockmap socket without a verdict program
bpf, sockmap: Account for receive queue in FIONREAD without a verdict program
selftests/bpf: Fail unbound UDP on sockmap update
selftests/bpf: Adapt sockmap update error handling
bpf, sockmap: Reject unhashed UDP sockets on sockmap update
selftests/bpf: Ensure UDP sockets are bound
bpf: Fix UAF in sock clone early bailouts
-----BEGIN PGP SIGNATURE-----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=4P+L
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20260717' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A single SELinux patch to correct a problem with the overlayfs mmap()
and mprotect() fixes from earlier this year where we inadvertenly
included an additional SELinux execmem permission check on some
operations"
* tag 'selinux-pr-20260717' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix incorrect execmem checks on overlayfs
- Fix a build error in certain configurations
- Clarify some parts of the documentation
- Remove unused code that I forgot to remove in commit cf52058dcd
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCalpR7hQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK0FsAP4g1ERoX/xslpz++c9GQPK3QhXGjug5
B1nGMnqDJPQmewD/eAloShBc5VYxnCeDDN24txP2RZeRK9XSG/mGTsdv2wk=
=Dtak
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Fix a build error in certain configurations
- Clarify some parts of the documentation
- Remove unused code that I forgot to remove in commit cf52058dcd
("lib/crypto: powerpc/md5: Drop powerpc optimized MD5 code")
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: aes - Fix conditions for selecting MAC dependencies
lib/crypto: docs: Improve introduction sentence
lib/crypto: docs: Fix some sentence fragments
lib/crypto: md5: Remove support for md5_mod_init_arch()
- the revert of the uclinux map driver which was presumably no longer
used but in fact was
- the use of SPI match data to get chip capabilities in the mchp23k256
driver
- several fixes addressing the newly introduced virt-concat support
- a missing build dependency on ndfc
There is as well the usual load (if not actually bigger than ususal) of
uninitialized variables, leaks, double free, and AI fuzzed issues being
fixed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmpaTeQACgkQJWrqGEe9
VoQ0/Af7BpZ9gxFZrgiXBdQ/XcVDfsrP7YP/3D3SLlB7ynwPHrq0YvMdBs8CCp+b
YbTDqBrt0+T1YeZ4igWu50bGSjAz0mLztE2r09/uwrG9YO+B0s98jXRFEqnaOMMf
2ghhrIKr2RB9OPJaigmtdzQij1UAjCIFpWxEz4XLytXQ5oxnzP2j50JyeVxifb1R
3KDw0KBibngn3I5MUQ4OHCg4+6Krf0rtjo8yZWB6LKgVlCcy3eEbYGZMn3YI3T6T
xsOa8KxkBLf2BeAFu2nDp0e/5vEfaVk9fCnRElBDz3kEdJ6LR6k45mLpqfB+U9HN
DhWZswONu0y54xHAmyauVWyYBK/DHg==
=SD+E
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Among the most important fixes that we have here, there are:
- the revert of the uclinux map driver which was presumed to
be no longer used but in fact was
- the use of SPI match data to get chip capabilities in the
mchp23k256 driver
- several fixes addressing the newly introduced virt-concat
support
- a missing build dependency on ndfc
as well as the usual load (if not actually bigger than usual) of
uninitialized variables, leaks, double free, and AI fuzzed issues
being fixed"
* tag 'mtd/fixes-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: maps: remove uclinux map driver"
mtd: onenand: samsung: report DMA completion timeouts
mtd: rawnand: fsl_ifc: return errors for failed page reads
mtd: mchp23k256: use SPI match data for chip caps
mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout
mtd: rawnand: lpc32xx_mlc: fail DMA transfers on timeout
mtd: fix double free and WARN_ON in add_mtd_device() error paths
mtd: virt-concat: free duplicate generated name
mtd: nand: mtk-ecc: stop on ECC idle timeouts
mtd: mtdswap: remove debugfs stats file on teardown
mtd: mtdpart: validate partition bounds in mtd_add_partition()
mtd: mtdpart: fix uninitialized erasesize on MTDPART_OFS_RETAIN error path
mtd: rawnand: ndfc: add CONFIG_OF dependency
mtd: spinand: initialize ret in regular page reads
mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy()
mtd: rawnand: ingenic: handle ECC clock enable failures
mtd: nand: ecc-mtk: handle ECC clock enable failures
mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy_joins()
mtd: rawnand: ndfc: fix gcc uninitialized var
- Fix RPMB device unregister ordering
- Fix __counted_by handling in mmc_test
MMC host:
- mtk-sd: Document missing clocks for MT8189
- sdhci-esdhc-imx: Fix the support for system suspend/resume for SDIO
- sdhci-of-dwcmshc: Fix error handling for clock prepare/enable
- vub300: Fix lockdep issue for the cmd_mutex
- vub300: Fix use-after-free on probe failure
MEMSTICK:
- Reject a card that reports too many blocks
-----BEGIN PGP SIGNATURE-----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=IHdC
-----END PGP SIGNATURE-----
Merge tag 'mmc-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix RPMB device unregister ordering
- Fix __counted_by handling in mmc_test
MMC host:
- mtk-sd: Document missing clocks for MT8189
- sdhci-esdhc-imx: Fix the support for system suspend/resume for SDIO
- sdhci-of-dwcmshc: Fix error handling for clock prepare/enable
- vub300:
- Fix lockdep issue for the cmd_mutex
- Fix use-after-free on probe failure
MEMSTICK:
- Reject a card that reports too many blocks"
* tag 'mmc-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: fix resume error handling
mmc: sdhci-esdhc-imx: make non-fatal errors non-blocking in suspend
mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend
mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt
mmc: sdhci-esdhc-imx: restore pinctrl before restoring ios timing on resume
mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore
mmc: sdhci-esdhc-imx: restore DLL override for DDR modes on resume
mmc: sdhci-esdhc-imx: remove unnecessary mmc_card_wake_sdio_irq check for tuning save/restore
mmc: block: fix RPMB device unregister ordering
memstick: ms_block: reject a card that reports too many blocks
dt-bindings: mmc: mtk-sd: Document extra clocks for MT8189
mmc: vub300: defer reset until cmd_mutex is unlocked
mmc: vub300: fix use-after-free on probe failure
mmc: mmc_test: Fix __counted_by handling after kzalloc_flex() conversion
mmc: sdhci-of-dwcmshc: check bus clock enable result in the probe() method
There are only three devicetree fixes this time: one critical memory
corruption fix for Renesas and three minor corrections for Tegra.
The MAINTAINERS file is updated for a new maintainer of the CIX platform
and two address changes.
The rest is all driver fixes, mostly firmware:
- multiple runtime issues in ARM SCMI and FF-A firmware code, dealing
with error handling for corner cases in firmware.
- multiple fixes for reset drivers, dealing with individual platform
specific mistakes and more error handling
- minor build and runtime fixes for the Tegra SoC drivers
-----BEGIN PGP SIGNATURE-----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=BN00
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are only three devicetree fixes this time: one critical memory
corruption fix for Renesas and three minor corrections for Tegra.
The MAINTAINERS file is updated for a new maintainer of the CIX
platform and two address changes.
The rest is all driver fixes, mostly firmware:
- multiple runtime issues in ARM SCMI and FF-A firmware code, dealing
with error handling for corner cases in firmware.
- multiple fixes for reset drivers, dealing with individual platform
specific mistakes and more error handling
- minor build and runtime fixes for the Tegra SoC drivers"
* tag 'soc-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: renesas: ironhide: Describe inline ECC carveouts
MAINTAINERS: Update maintainer and git tree for CIX SoC
ARM: Don't let ARMv5 platforms select USE_OF
MAINTAINERS: Update SpacemiT SoC git tree repository
firmware: arm_scmi: Rate-limit queue-full warnings in IRQ context
firmware: arm_scmi: Use 64-bit division for clock rate rounding
reset: imx7: Correct polarity of MIPI CSI resets on i.MX8MQ
reset: sunxi: fix memory region leak on ioremap failure
dt-bindings: reset: altr: add COMBOPHY_RESET for Agilex5
reset: spacemit: k3: fix USB2 ahb reset
firmware: arm_scmi: Grammar s/may needed/may be needed/
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
firmware: arm_ffa: Respect firmware advertised RX/TX buffer size limits
arm64: tegra: Fix CPU1 node unit-address on Tegra264
arm64: tegra: Fix CPU compatible string to cortex-a78ae on Tegra234
MAINTAINERS: .mailmap: update Jens Wiklander's email address
soc/tegra: fuse: Fix spurious straps warning on SMCCC platforms
soc/tegra: pmc: fix #ifdef block in header
drm/tegra: Fix a strange error handling path
arm64: tegra: Remove fallback compatible for GPCDMA
- Enable CONFIG_VPA_PMU to be used with KVM
- Initialize starttime at boot for native accounting
- Set CPU_FTR_P11_PVR for Power11 and later processors
- fix memory leak on krealloc failure in papr_init
- Misc fixes and cleanups
Thanks to:
Amit Machhiwal, Christophe Leroy (CS GROUP), Ethan Nelson-Moore, Gautam
Menghani, Harsh Prateek Bora, Junrui Luo, Mukesh Kumar Chaurasiya (IBM), Ritesh
Harjani (IBM), Rosen Penev, Shrikanth Hegde, Thorsten Blum, Yuhao Jiang
-----BEGIN PGP SIGNATURE-----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=jI4x
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Enable CONFIG_VPA_PMU to be used with KVM
- Initialize starttime at boot for native accounting
- Set CPU_FTR_P11_PVR for Power11 and later processors
- fix memory leak on krealloc failure in papr_init
- Misc fixes and cleanups
Thanks to Amit Machhiwal, Christophe Leroy (CS GROUP), Ethan
Nelson-Moore, Gautam Menghani, Harsh Prateek Bora, Junrui Luo, Mukesh
Kumar Chaurasiya (IBM), Ritesh Harjani (IBM), Rosen Penev, Shrikanth
Hegde, Thorsten Blum, and Yuhao Jiang
* tag 'powerpc-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Remove dead non-preemption code
powerpc/dt_cpu_ftrs: Set CPU_FTR_P11_PVR for Power11 and later processors
powerpc/pseries: fix memory leak on krealloc failure in papr_init
powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address()
powerpc/vtime: Initialize starttime at boot for native accounting
powerpc/85xx: Add fsl,ifc to common device ids
powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access()
powerpc/pseries/Kconfig: Enable CONFIG_VPA_PMU to be used with KVM
On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed
attribute table itself instead of calling ip_valid_fib_dump_req(). The
RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is
present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no
RTA_OIF hits a NULL dereference.
RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without
CAP_NET_ADMIN, so an unprivileged user can trigger it.
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189)
Call Trace:
mpls_dump_routes (net/mpls/af_mpls.c:2236)
netlink_dump (net/netlink/af_netlink.c:2331)
__netlink_dump_start (net/netlink/af_netlink.c:2446)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7033)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1345)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
__sock_sendmsg (net/socket.c:790)
____sys_sendmsg (net/socket.c:2684)
___sys_sendmsg (net/socket.c:2738)
__sys_sendmsg (net/socket.c:2770)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Skip unset attributes, as ip_valid_fib_dump_req() does.
Fixes: 196cfebf89 ("net/mpls: Handle kernel side filtering of route dumps")
Assisted-by: Claude:claude-opus-4-8
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260711114958.1009619-3-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
llc_sap_add_socket() takes a SAP reference for each socket added to a SAP,
and llc_sap_remove_socket() releases it. llc_create_incoming_sock() takes
an additional SAP reference after adding the child socket.
This extra reference was balanced by an explicit llc_sap_put() in
llc_ui_release() until commit 3100aa9d74 ("llc: fix SAP reference
counting w.r.t. socket handling") removed that put. The corresponding hold
in the accept path was left behind.
When such a child socket is removed, only the reference taken by
llc_sap_add_socket() is released. The extra reference keeps the SAP alive
after its last socket is removed. Remove the obsolete hold.
Fixes: 3100aa9d74 ("llc: fix SAP reference counting w.r.t. socket handling")
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20260712130343.518797-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The "mac" bind mode reactivation downs the interface, restores the saved
MAC and renames it to trigger a target resume. This assumes the recreated
interface comes back with a different MAC, which is true under
MACAddressPolicy=none (as on the Netdev CI) but not when MACs are
persistent. In the persistent case netconsole resumes the target on its
own, and the down/restore/rename flow instead drops it and fails the test.
Guard the block on the MAC having actually changed so the test passes
under both policies.
Fixes: 6ecc08329b ("selftests: netconsole: validate target resume")
Reported-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Closes: https://lore.kernel.org/netdev/f398373e-2cb4-4649-a491-9763df94d98b@kernel.org/
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-netcons-mac-reload-v1-1-3fb1bcc70b4a@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review.
Fixes: 194fad5b27 ("bnxt_en: Refactor bnxt_rdma_aux_device_init/uninit functions")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260711163716.3996929-1-ruoyuw560@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
