Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct tcmu_tmr.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Bodo Stroesser <bostroesser@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230922175300.work.148-kees@kernel.org
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make the UFS device execute realtime (RT) requests before other requests.
This will be used in Android to reduce the I/O latency of the foreground
app.
Note: UFS devices do not support CDL so using CDL is not a viable
alternative.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-5-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_comp_scsi_upiu() has one caller and that caller ensures that
lrbp->cmd != NULL. Hence leave out the lrbp->cmd check from
ufshcd_comp_scsi_upiu().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-4-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The DMA alignment for the Exynos controller follows directly from the PRDT
segment size configured in ufs-exynos.c. Hence, move the DMA alignment code
into the Exynos driver source code.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-3-bvanassche@acm.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The block layer core guarantees that tag numbers are in the expected
range. Hence remove the statements that check this. This patch suppresses
Coverity warnings about left shifts with a negative right hand operand.
The following commit originally introduced request tag range checks:
14497328b6 ("scsi: ufs: verify command tag validity").
Cc: daejun7.park@samsung.com
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-2-bvanassche@acm.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, if CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE is enabled, the
memory space used by DFX is allocated during device initialization, which
occupies a large number of memory resources. The memory usage before and
after the driver is loaded is as follows:
Memory usage before the driver is loaded:
$ free -m
total used free shared buff/cache available
Mem: 867352 2578 864037 11 735 861681
Swap: 4095 0 4095
Memory usage after the driver which include 4 HBAs is loaded:
$ insmod hisi_sas_v3_hw.ko
$ free -m
total used free shared buff/cache available
Mem: 867352 4760 861848 11 743 859495
Swap: 4095 0 4095
The driver with 4 HBAs connected will allocate about 110 MB of memory
without enabling debugfs.
Therefore, to avoid wasting memory resources, DFX memory is allocated
during dump triggering. The dump may fail due to memory allocation
failure. After this change, each dump costs about 10 MB of memory, and each
dump lasts about 100 ms.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1694571327-78697-4-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, register information dump is performed via workqueue, regardless
of the trigger mode (automatic or manual). There is a delay in dumping
register through workqueue, the exact register information at trigger time
cannot be obtained.
Call register snapshot directly instead of through a workqueue.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1694571327-78697-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To
improve here there is a quest to make the remove callback return void. In
the first step of this quest all drivers are converted to .remove_new()
which already returns void. Eventually after all drivers are converted,
.remove_new() is renamed to .remove().
All platform drivers below drivers/ufs/ unconditionally return zero in
their remove callback and so can be converted trivially to the variant
returning void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230917145722.1131557-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal <dlemoal@kernel.org> says:
The first patch of this series fixes an issue with IRQ setup which
prevents the controller from resuming after a system suspend. The
following patches are code cleanup without any functional changes.
[mkp: The first patch went into v6.6-rc2 and thus this merge
constitutes the remaining patches of the series]
Link: https://lore.kernel.org/r/20230911232745.325149-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the macro PM8001_READ_VPD used to define if a controller WWN should
be retrieved from the device. Instead, define the better named boolean
module parameter "read_wwn" to control this.
The code to set a fixed address for a phy device address when read_wwn is
set to false is simplified and fixed to avoid sparse warnings.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-11-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the macro PM8001_USE_TASKLET used to conditionally use tasklets for
MSI-X interrupts handling and replace it with the boolean module parameter
pm8001_use_tasklet. This parameter defaults to true and can be true only if
pm8001_use_msix is also true.
Code conditionnaly defined with PM8001_USE_TASKLET is modified to instead
use the parameter pm8001_use_tasklet.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-10-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The pm8001 driver does not compile if PM8001_USE_MSIX is not defined in
pm8001_sas.h because various fields and functions conditionally defined are
used unconditionally without a "#ifdef PM8001_USE_MSIX" protection. This
macro is rather useless anyway and not convenient as diabling MSI-X use
requires recompiling the driver.
Remove this macro and replace it with the bool module parameter "use_msix"
which defaults to true. The use of MSI-X interrupts for an adapter is gated
by this module parameter for adapters that actually support MSI-X. The
"use_msix" boolean field is added to struct pm8001_hba_info and all code
defined depending on PM8001_USE_MSIX is modified to rely on
pm8001_hba_info->use_msix instead.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-9-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the functions pm80xx_chip_intx_interrupt_enable() and
pm80xx_chip_intx_interrupt_disable() and open code them respectively in
pm80xx_chip_interrupt_enable() and pm80xx_chip_interrupt_disable().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-8-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pm8001_chip_msix_interrupt_enable() and
pm8001_chip_msix_interrupt_disable() are always cold with the vector
argument equal to 0. This allows simplifying the code for these
functions. With this change, the functions are simple enough and can be
removed by open coding them directly in pm8001_chip_interrupt_enable() and
pm8001_chip_interrupt_disable(). Also do the same for the functions
pm8001_chip_intx_interrupt_enable() and
pm8001_chip_intx_interrupt_disable() and remove these functions.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-7-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Factor out the common code of pm8001_interrupt_handler_msix and of
pm8001_interrupt_handler_intx() into the new function pm8001_handle_irq()
and use this new helper in these two functions to simplify the code.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-6-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Factor out the identical code for killing tasklets in pm8001_pci_remove()
and pm8001_pci_suspend() and instead use the new function
pm8001_kill_tasklet().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-5-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Factor out the identical code for initializing tasklets in
pm8001_pci_alloc() and pm8001_pci_resume() and instead use the new function
pm8001_init_tasklet().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-4-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of repeating the same code twice in pm8001_pci_remove() and
pm8001_pci_suspend() to free IRQs, introduuce the function
pm8001_free_irq() to do that.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-3-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nitin Rawat <quic_nitirawa@quicinc.com> says:
This patch series adds programming support for Qualcomm UFS V4 and
above to align avoid with Hardware Specification. This patch series
will address stability and performance issues.
In this patch series below changes are taken care.
1) Register layout for DME_VS_CORE_CLK_CTRL has changed for v4 and above.
2) Adds Support to configure PA_VS_CORE_CLK_40NS_CYCLES attibute for UFS V4
and above.
3) Adds Support to configure multiple unipro frequencies like 403MHz,
300MHz, 202MHz, 150 MHz, 75Mhz, 37.5 MHz for Qualcomm UFS Controller V4
and above.
4) Allow configuration of SYS1CLK_1US_REG for UFS V4 and above.
Link: https://lore.kernel.org/r/20230905052400.13935-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "hs_gear" variable is used to cache the gear setting for the PHY that
will be used during ufs_qcom_power_up_sequence(). But it creates ambiguity
with the gear setting used by the ufshcd driver.
So let's rename it to "phy_gear" to make it explicit that this variable
caches the gear setting for the PHY.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230908145329.154024-2-manivannan.sadhasivam@linaro.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Tested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "hs_gear" variable is used to program the PHY settings (submode) during
ufs_qcom_power_up_sequence(). Currently, it is being updated every time the
agreed gear changes. Due to this, if the gear got downscaled before suspend
(runtime/system), then while resuming, the PHY settings for the lower gear
will be applied first and later when scaling to max gear with REINIT, the
PHY settings for the max gear will be applied.
This adds a latency while resuming and also really not needed as the PHY
gear settings are backwards compatible i.e., we can continue using the PHY
settings for max gear with lower gear speed.
So let's update the "hs_gear" variable _only_ when the agreed gear is
greater than the current one. This guarantees that the PHY settings will be
changed only during probe time and fatal error condition.
Due to this, UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH can now be skipped
when the PM operation is in progress.
Cc: stable@vger.kernel.org
Fixes: 96a7141da3 ("scsi: ufs: core: Add support for reinitializing the UFS device")
Reported-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230908145329.154024-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Tested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SYS1CLK_1US represents the required number of system 1-clock cycles for one
microsecond. UFS Host Controller V4.0 and above mandates to write
SYS1CLK_1US_REG register and also these timer configuration needs to be
called from clk scaling pre ops as per HPG.
Refactor ufs_qcom_cfg_timers and add the below code support to align
with HPG.
a)Configure SYS1CLK_1US_REG for UFS V4 and above.
b)Introduce a new argument is_pre_scale_up for ufs_qcom_cfg_timers
to configure SYS1CLK_1US for max freq during prescale and link startup
condition.
c)Move ufs_qcom_cfg_timers from clk scaling post change ops
to clk scaling pre change ops.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-6-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently CORE_CLK_1US_CYCLES, PA_VS_CORE_CLK_40NS_CYCLES are configured
in clk scaling post change ops. This is not aligning to HPG.
Move this to clk scaling pre change ops to align completely with hardware
specification.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-5-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
PA_VS_CORE_CLK_40NS_CYCLES attribute represents the required number of
Qunipro core clock for 40 nanoseconds. For UFS host controller V4 and above
PA_VS_CORE_CLK_40NS_CYCLES needs to be programmed as per frequency of
unipro core clk of UFS host controller.
Add Support to configure PA_VS_CORE_CLK_40NS_CYCLES for Controller V4 and
above to align with the hardware specification and to avoid functionality
issues like h8 enter/exit failure, command timeout.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-4-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Qualcomm UFS Controller V4 and above supports multiple unipro frequencies
like 403MHz, 300MHz, 202MHz, 150 MHz, 75Mhz, 37.5 MHz. Current code
supports only 150MHz and 75MHz which have performance impact due to low UFS
controller frequencies.
For targets which supports frequencies other than 150 MHz and 75 Mhz, needs
an update of MAX_CORE_CLK_1US_CYCLES to match the configured frequency to
avoid functionality issues. Add multiple frequency support for
MAX_CORE_CLK_1US_CYCLES based on the frequency configured.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-3-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS Controller V4 and above, the register layout for DME_VS_CORE_CLK_CTRL
register has changed. MAX_CORE_CLK_1US_CYCLES offset has changed from 0 to
0x10 and length of attrbute is changed from 8bit to 12bit.
Add support to configure MAX_CORE_CLK_1US_CYCLES for UFS V4 and above as
per new register layout.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-2-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix in the imm driver the same problem that was fixed in the ppa driver by
commit 68a4f84a17 ("scsi: ppa: Add a module parameter for the transfer
mode").
Tested and confirmed working with an Iomega Z250P zip drive and a StarTech
PEX1P2 AX99100 PCIe parallel port.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://lore.kernel.org/r/20230831054620.515611-1-alexhenrie24@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sas_discover_end_dev() is defined and used only in sas_discover.c. Define
this function as static.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230912230551.454357-4-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sas_set_phy_speed() is used only within sas_init.c. Declare this function
as static.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230912230551.454357-3-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the declarations of functions used only within libsas from
include/scsi/libsas.h to drivers/scsi/libsas/sas_internal.h
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230912230551.454357-2-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bindings do not allow vdd-hba-max-microamp property and the driver does not
use it (does not control load of vdd-hba supply). Skip looking for this
property to avoid misleading dmesg messages:
ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: unable to find vdd-hba-max-microamp
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230906113302.201888-1-krzysztof.kozlowski@linaro.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use FIELD_GET() to extract PCIe capability registers field instead of
custom masking and shifting.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230913122748.29530-9-ilpo.jarvinen@linux.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use FIELD_GET() to extract PCIe capability register fields instead of
custom masking and shifting. Also remove the unnecessary cast to u8, the
value in those fields always fits to u8.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230913122748.29530-8-ilpo.jarvinen@linux.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During rmmod, when dev_loss_tmo callback is called, an ndlp kref count is
decremented twice. Once for SCSI transport registration and second to
remove the initial node allocation kref. If there is also an NVMe
transport registration, another reference count decrement is expected in
lpfc_nvme_unregister_port().
Race conditions between the NVMe transport remoteport_delete and
dev_loss_tmo callbacks sometimes results in premature ndlp object release
resulting in use-after-free issues.
Fix by not dropping the ndlp object in dev_loss_tmo callback with an
outstanding NVMe transport registration. Inversely, mark the final
NLP_DROPPED flag in lpfc_nvme_unregister_port when rmmod flag is set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230908211923.37603-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a dev_loss_tmo event occurs, an ndlp lock is taken before checking
nlp_flag for NLP_DROPPED. There is an attempt to restore the ndlp lock
when exiting the if statement, but the nlp_put kref could be the final
decrement causing a use-after-free memory access on a released ndlp object.
Instead of trying to reacquire the ndlp lock after checking nlp_flag, just
return after calling nlp_put.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230908211852.37576-1-justintee8345@gmail.com
Reviewed-by: "Ewan D. Milne" <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since debugfs_create_file() returns ERR_PTR and never NULL, use IS_ERR() to
check the return value.
Fixes: 2fcbc569b9 ("scsi: lpfc: Make debugfs ktime stats generic for NVME and SCSI")
Fixes: 4c47efc140 ("scsi: lpfc: Move SCSI and NVME Stats to hardware queue structures")
Fixes: 6a828b0f61 ("scsi: lpfc: Support non-uniform allocation of MSIX vectors to hardware queues")
Fixes: 95bfc6d8ad ("scsi: lpfc: Make FW logging dynamically configurable")
Fixes: 9f77870870 ("scsi: lpfc: Add debugfs support for cm framework buffers")
Fixes: c490850a09 ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230906030809.2847970-1-ruanjinjie@huawei.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The logical unit information is missing from the UFS command tracing
output. Although the device name is logged, e.g. 13200000.ufs, this name
does not include logical unit information. Hence this patch that replaces
the device name with the SCSI ID in the tracing output. An example of
tracing output with this patch applied:
kworker/8:0H-80 [008] ..... 89.106063: ufshcd_command: send_req: 0:0:0:4: tag: 10, DB: 0x7ffffbff, size: 524288, IS: 0, LBA: 1085538, opcode: 0x8a (WRITE_16), group_id: 0x0
dd-4225 [000] d.h.. 89.106219: ufshcd_command: complete_rsp: 0:0:0:4: tag: 11, DB: 0x7ffff7ff, size: 524288, IS: 0, LBA: 1081728, opcode: 0x8a (WRITE_16), group_id: 0x0
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230907183739.905938-1-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function pm8001_pci_resume() only calls pm8001_request_irq() without
calling pm8001_setup_irq(). This causes the IRQ allocation to fail, which
leads all drives being removed from the system.
Fix this issue by integrating the code for pm8001_setup_irq() directly
inside pm8001_request_irq() so that MSI-X setup is performed both during
normal initialization and resume operations.
Fixes: dbf9bfe615 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-2-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed
when we receive the response.
Signed-off-by: Michal Grzedzicki <mge@meta.com>
Link: https://lore.kernel.org/r/20230911170340.699533-2-mge@meta.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add CI integration support files for drm subsystem to gitlab.freedesktop.org instance.
-----BEGIN PGP SIGNATURE-----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=X1RZ
-----END PGP SIGNATURE-----
Merge tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm ci scripts from Dave Airlie:
"This is a bunch of ci integration for the freedesktop gitlab instance
where we currently do upstream userspace testing on diverse sets of
GPU hardware. From my perspective I think it's an experiment worth
going with and seeing how the benefits/noise playout keeping these
files useful.
Ideally I'd like to get this so we can do pre-merge testing on PRs
eventually.
Below is some info from danvet on why we've ended up making the
decision and how we can roll it back if we decide it was a bad plan.
Why in upstream?
- like documentation, testcases, tools CI integration is one of these
things where you can waste endless amounts of time if you
accidentally have a version that doesn't match your source code
- but also like the above, there's a balance, this is the initial cut
of what we think makes sense to keep in sync vs out-of-tree,
probably needs adjustment
- gitlab supports out-of-repo gitlab integration and that's what's
been used for the kernel in drm, but it results in per-driver
fragmentation and lots of duplicated effort. the simple act of
smashing an arbitrary winner into a topic branch already started
surfacing patches on dri-devel and sparking good cross driver team
discussions
Why gitlab?
- it's not any more shit than any of the other CI
- drm userspace uses it extensively for everything in userspace, we
have a lot of people and experience with this, including
integration of hw testing labs
- media userspace like gstreamer is also on gitlab.fd.o, and there's
discussion to extend this to the media subsystem in some fashion
Can this be shared?
- there's definitely a pile of code that could move to scripts/ if
other subsystem adopt ci integration in upstream kernel git. other
bits are more drm/gpu specific like the igt-gpu-tests/tools
integration
- docker images can be run locally or in other CI runners
Will we regret this?
- it's all in one directory, intentionally, for easy deletion
- probably 1-2 years in upstream to see whether this is worth it or a
Big Mistake. that's roughly what it took to _really_ roll out solid
CI in the bigger userspace projects we have on gitlab.fd.o like
mesa3d"
* tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm:
drm: ci: docs: fix build warning - add missing escape
drm: Add initial ci/ subdirectory
fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit
more conservative to fix kexec() lockups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=S38E
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix preemption delays in the SGX code, remove unnecessarily
UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and
make the x86 SMP init code a bit more conservative to fix kexec()
lockups"
* tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()
x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI
x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld
x86/smp: Don't send INIT to non-present and non-booted CPUs
affecting certain Intel systems.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Zq1S
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fix from Ingo Molnar:
"Work around a firmware bug in the uncore PMU driver, affecting certain
Intel systems"
* tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Correct the number of CHAs on EMR
