commit 243b467dea upstream.
This reverts commit 7294863a6f.
This commit was erroneously applied again after commit 0ab5d711ec
("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
removed it, leading to very hard to debug crashes, when used with a system with two
AMD GPUs of which only one supports ASPM.
Link: https://lore.kernel.org/linux-acpi/20251006120944.7880-1-spasswolf@web.de/
Link: https://github.com/acpica/acpica/issues/1060
Fixes: 0ab5d711ec ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 97a9689300)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2030dddf95 upstream.
When truncating a large swap entry, shmem_free_swap() returns 0 when the
entry's index doesn't match the given index due to lookup alignment. The
failure fallback path checks if the entry crosses the end border and
aborts when it happens, so truncate won't erase an unexpected entry or
range. But one scenario was ignored.
When `index` points to the middle of a large swap entry, and the large
swap entry doesn't go across the end border, find_get_entries() will
return that large swap entry as the first item in the batch with
`indices[0]` equal to `index`. The entry's base index will be smaller
than `indices[0]`, so shmem_free_swap() will fail and return 0 due to the
"base < index" check. The code will then call shmem_confirm_swap(), get
the order, check if it crosses the END boundary (which it doesn't), and
retry with the same index.
The next iteration will find the same entry again at the same index with
same indices, leading to an infinite loop.
Fix this by retrying with a round-down index, and abort if the index is
smaller than the truncate range.
Link: https://lkml.kernel.org/r/aXo6ltB5iqAKJzY8@KASONG-MC4
Fixes: 809bc86517 ("mm: shmem: support large folio swap out")
Fixes: 8a1968bd99 ("mm/shmem, swap: fix race of truncate and swap entry split")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Chris Mason <clm@meta.com>
Closes: https://lore.kernel.org/linux-mm/20260128130336.727049-1-clm@meta.com/
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7db85d579 upstream.
The gve driver's "rx_dropped" statistic, exposed via `ethtool -S`,
incorrectly includes `rx_buf_alloc_fail` counts. These failures
represent an inability to allocate receive buffers, not true packet
drops where a received packet is discarded. This misrepresentation can
lead to inaccurate diagnostics.
This patch rectifies the ethtool "rx_dropped" calculation. It removes
`rx_buf_alloc_fail` from the total and adds `xdp_tx_errors` and
`xdp_redirect_errors`, which represent legitimate packet drops within
the XDP path.
Cc: stable@vger.kernel.org
Fixes: 433e274b8f ("gve: Add stats for gve.")
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Matt Olson <maolson@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b9ebcce02 upstream.
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC.
Cc: stable@vger.kernel.org
Fixes: 24aeb56f2d ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Debarghya Kundu <debarghyak@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1478a34470 upstream.
commit f81cd79311 ("drm/amd/amdgpu: Fix MES init sequence") caused
a dependency on new enough MES firmware to use amdgpu. This was fixed
on most gfx11 and gfx12 hardware with commit 0180e0a5dd
("drm/amdgpu/mes: add compatibility checks for set_hw_resource_1"), but
this left out that GC 11.0.4 had breakage at MES 0x51.
Bump the requirement to 0x52 instead.
Reported-by: danijel@nausys.com
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4576
Fixes: f81cd79311 ("drm/amd/amdgpu: Fix MES init sequence")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c2d2ccc85f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99a2ef5009 upstream.
An UAF issue was observed:
BUG: KASAN: slab-use-after-free in page_counter_uncharge+0x65/0x150
Write of size 8 at addr ffff888106715440 by task insmod/527
CPU: 4 UID: 0 PID: 527 Comm: insmod 6.19.0-rc7-next-20260129+ #11
Tainted: [O]=OOT_MODULE
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
kasan_report+0xca/0x100
kasan_check_range+0x39/0x1c0
page_counter_uncharge+0x65/0x150
dmem_cgroup_uncharge+0x1f/0x260
Allocated by task 527:
Freed by task 0:
The buggy address belongs to the object at ffff888106715400
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 64 bytes inside of
freed 512-byte region [ffff888106715400, ffff888106715600)
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffff888106715300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106715380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888106715400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106715480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888106715500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
The issue occurs because a pool can still be held by a caller after its
associated memory region is unregistered. The current implementation frees
the pool even if users still hold references to it (e.g., before uncharge
operations complete).
This patch adds a reference counter to each pool, ensuring that a pool is
only freed when its reference count drops to zero.
Fixes: b168ed458d ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Cc: stable@vger.kernel.org # v6.14+
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 592a68212c upstream.
A warnning was detected:
WARNING: suspicious RCU usage
6.19.0-rc7-next-20260129+ #1101 Tainted: G O
kernel/cgroup/dmem.c:456 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by insmod/532:
#0: ffffffff85e78b38 (dmemcg_lock){+.+.}-dmem_cgroup_unregister_region+
stack backtrace:
CPU: 2 UID: 0 PID: 532 Comm: insmod Tainted: 6.19.0-rc7-next-
Tainted: [O]=OOT_MODULE
Call Trace:
<TASK>
dump_stack_lvl+0xb0/0xd0
lockdep_rcu_suspicious+0x151/0x1c0
dmem_cgroup_unregister_region+0x1e2/0x380
? __pfx_dmem_test_init+0x10/0x10 [dmem_uaf]
dmem_test_init+0x65/0xff0 [dmem_uaf]
do_one_initcall+0xbb/0x3a0
The macro list_for_each_rcu() must be used within an RCU read-side critical
section (between rcu_read_lock() and rcu_read_unlock()). Using it outside
that context, as seen in dmem_cgroup_unregister_region(), triggers the
lockdep warning because the RCU protection is not guaranteed.
Replace list_for_each_rcu() with list_for_each_entry_safe(), which is
appropriate for traversal under spinlock protection where nodes may be
deleted.
Fixes: b168ed458d ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Cc: stable@vger.kernel.org # v6.14+
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc8dedae02 upstream.
This fixes a kernel oops when reading ceph snapshot directories (.snap),
for example by simply running `ls /mnt/my_ceph/.snap`.
The variable str is guarded by __free(kfree), but advanced by one for
skipping the initial '_' in snapshot names. Thus, kfree() is called
with an invalid pointer. This patch removes the need for advancing the
pointer so kfree() is called with correct memory pointer.
Steps to reproduce:
1. Create snapshots on a cephfs volume (I've 63 snaps in my testcase)
2. Add cephfs mount to fstab
$ echo "samba-fileserver@.files=/volumes/datapool/stuff/3461082b-ecc9-4e82-8549-3fd2590d3fb6 /mnt/test/stuff ceph acl,noatime,_netdev 0 0" >> /etc/fstab
3. Reboot the system
$ systemctl reboot
4. Check if it's really mounted
$ mount | grep stuff
5. List snapshots (expected 63 snapshots on my system)
$ ls /mnt/test/stuff/.snap
Now ls hangs forever and the kernel log shows the oops.
Cc: stable@vger.kernel.org
Fixes: 101841c383 ("[ceph] parse_longname(): strrchr() expects NUL-terminated string")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220807
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vogelbacher <daniel@chaospixel.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23ea2a4c72 upstream.
On big-endian systems the 32-bit low and high halves need to be swapped
for the underlying assembly implementation to work correctly.
Fixes: fd1d362600 ("ARM: implement memset32 & memset64")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd3884a204 upstream.
Similar to commit 870611e487 ("rbd: get snapshot context after
exclusive lock is ensured to be held"), move the "beyond EOD" check
into the image request state machine so that it's performed after
exclusive lock is ensured to be held. This avoids various race
conditions which can arise when the image is shrunk under I/O (in
practice, mostly readahead). In one such scenario
rbd_assert(objno < rbd_dev->object_map_size);
can be triggered if a close-to-EOD read gets queued right before the
shrink is initiated and the EOD check is performed against an outdated
mapping_size. After the resize is done on the server side and exclusive
lock is (re)acquired bringing along the new (now shrunk) object map, the
read starts going through the state machine and rbd_obj_may_exist() gets
invoked on an object that is out of bounds of rbd_dev->object_map array.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7987cce375 upstream.
The CephFS kernel client has regression starting from 6.18-rc1.
We have issue in ceph_mds_auth_match() if fs_name == NULL:
const char fs_name = mdsc->fsc->mount_options->mds_namespace;
...
if (auth->match.fs_name && strcmp(auth->match.fs_name, fs_name)) {
/ fsname mismatch, try next one */
return 0;
}
Patrick Donnelly suggested that: In summary, we should definitely start
decoding `fs_name` from the MDSMap and do strict authorizations checks
against it. Note that the `-o mds_namespace=foo` should only be used for
selecting the file system to mount and nothing else. It's possible
no mds_namespace is specified but the kernel will mount the only
file system that exists which may have name "foo".
This patch reworks ceph_mdsmap_decode() and namespace_equals() with
the goal of supporting the suggested concept. Now struct ceph_mdsmap
contains m_fs_name field that receives copy of extracted FS name
by ceph_extract_encoded_string(). For the case of "old" CephFS file
systems, it is used "cephfs" name.
[ idryomov: replace redundant %*pE with %s in ceph_mdsmap_decode(),
get rid of a series of strlen() calls in ceph_namespace_match(),
drop changes to namespace_equals() body to avoid treating empty
mds_namespace as equal, drop changes to ceph_mdsc_handle_fsmap()
as namespace_equals() isn't an equivalent substitution there ]
Cc: stable@vger.kernel.org
Fixes: 22c73d52a6 ("ceph: fix multifs mds auth caps issue")
Link: https://tracker.ceph.com/issues/73886
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Patrick Donnelly <pdonnell@ibm.com>
Tested-by: Patrick Donnelly <pdonnell@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5cbacd7f8 upstream.
Fix PROCMAP_QUERY to fetch optional build ID only after dropping mmap_lock
or per-VMA lock, whichever was used to lock VMA under question, to avoid
deadlock reported by syzbot:
-> #1 (&mm->mmap_lock){++++}-{4:4}:
__might_fault+0xed/0x170
_copy_to_iter+0x118/0x1720
copy_page_to_iter+0x12d/0x1e0
filemap_read+0x720/0x10a0
blkdev_read_iter+0x2b5/0x4e0
vfs_read+0x7f4/0xae0
ksys_read+0x12a/0x250
do_syscall_64+0xcb/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&sb->s_type->i_mutex_key#8){++++}-{4:4}:
__lock_acquire+0x1509/0x26d0
lock_acquire+0x185/0x340
down_read+0x98/0x490
blkdev_read_iter+0x2a7/0x4e0
__kernel_read+0x39a/0xa90
freader_fetch+0x1d5/0xa80
__build_id_parse.isra.0+0xea/0x6a0
do_procmap_query+0xd75/0x1050
procfs_procmap_ioctl+0x7a/0xb0
__x64_sys_ioctl+0x18e/0x210
do_syscall_64+0xcb/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(&mm->mmap_lock);
lock(&sb->s_type->i_mutex_key#8);
lock(&mm->mmap_lock);
rlock(&sb->s_type->i_mutex_key#8);
*** DEADLOCK ***
This seems to be exacerbated (as we haven't seen these syzbot reports
before that) by the recent:
777a8560fd ("lib/buildid: use __kernel_read() for sleepable context")
To make this safe, we need to grab file refcount while VMA is still locked, but
other than that everything is pretty straightforward. Internal build_id_parse()
API assumes VMA is passed, but it only needs the underlying file reference, so
just add another variant build_id_parse_file() that expects file passed
directly.
[akpm@linux-foundation.org: fix up kerneldoc]
Link: https://lkml.kernel.org/r/20260129215340.3742283-1-andrii@kernel.org
Fixes: ed5d583a88 ("fs/procfs: implement efficient VMA querying API for /proc/<pid>/maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reported-by: <syzbot+4e70c8e0a2017b432f7a@syzkaller.appspotmail.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2c4c5b2bb upstream.
USB system wakeup need its PHY on, so add the GENPD_FLAG_ACTIVE_WAKEUP
flags to USB PHY genpd configuration.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Fixes: 556f5cf956 ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae0a24c5a8 upstream.
On i.MX8MM, the GPUMIX, GPU2D, and GPU3D blocks share a common reset
domain. Due to this hardware limitation, powering off/on GPU2D or GPU3D
also triggers a reset of the GPUMIX domain, including its ADB400 port.
However, the ADB400 interface must always be placed into power‑down mode
before being reset.
Currently the GPUMIX and GPU2D/3D power domains rely on runtime PM to
handle dependency ordering. In some corner cases, the GPUMIX power off
sequence is skipped, leaving the ADB400 port active when GPU2D/3D reset.
This causes the GPUMIX ADB400 port to be reset while still active,
leading to unpredictable bus behavior and GPU hangs.
To avoid this, refine the power‑domain control logic so that the GPUMIX
ADB400 port is explicitly powered down and powered up as part of the GPU
power domain on/off sequence. This ensures proper ordering and prevents
incorrect ADB400 reset.
Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9ab2b8389 upstream.
Current design will power off all dependent GPC power domains in
imx8mp_blk_ctrl_suspend(), even though the user device has enabled
wakeup capability. The result is that wakeup function never works
for such device.
An example will be USB wakeup on i.MX8MP. PHY device '382f0040.usb-phy'
is attached to power domain 'hsioblk-usb-phy2' which is spawned by hsio
block control. A virtual power domain device 'genpd:3:32f10000.blk-ctrl'
is created to build connection with 'hsioblk-usb-phy2' and it depends on
GPC power domain 'usb-otg2'. If device '382f0040.usb-phy' enable wakeup,
only power domain 'hsioblk-usb-phy2' keeps on during system suspend,
power domain 'usb-otg2' is off all the time. So the wakeup event can't
happen.
In order to further establish a connection between the power domains
related to GPC and block control during system suspend, register a genpd
power on/off notifier for the power_dev. This allows us to prevent the GPC
power domain from being powered off, in case the block control power
domain is kept on to serve system wakeup.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 556f5cf956 ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8aa6f7697f upstream.
As it is indicated by the comment, the rpmpd_aggregate_corner() function
tries to clamp the state to the highest corner/level supported by the
given power domain, however the calculation of the highest state contains
an off-by-one error.
The 'max_state' member of the 'rpmpd' structure indicates the highest
corner/level, and as such it does not needs to be decremented.
Change the code to use the 'max_state' value directly to avoid the error.
Fixes: 98c8b3efac ("soc: qcom: rpmpd: Add sync_state")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 826af7fa62 upstream.
The PCM trigger callback of aloop driver tries to check the PCM state
and stop the stream of the tied substream in the corresponding cable.
Since both check and stop operations are performed outside the cable
lock, this may result in UAF when a program attempts to trigger
frequently while opening/closing the tied stream, as spotted by
fuzzers.
For addressing the UAF, this patch changes two things:
- It covers the most of code in loopback_check_format() with
cable->lock spinlock, and add the proper NULL checks. This avoids
already some racy accesses.
- In addition, now we try to check the state of the capture PCM stream
that may be stopped in this function, which was the major pain point
leading to UAF.
Reported-by: syzbot+5f8f3acdee1ec7a7ef7b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/69783ba1.050a0220.c9109.0011.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260203141003.116584-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25e9e322d2 upstream.
The LTR blocking statistics and wakeup event counters are incorrectly
cross-referenced during debugfs output rendering. The code populates
pss_ltr_blkd[] with LTR blocking data and pss_s0ix_wakeup[] with wakeup
data, but the display loops reference the wrong arrays.
This causes the "LTR Blocking Status" section to print wakeup events
and the "Wakes Status" section to print LTR blockers, misleading power
management analysis and S0ix residency debugging.
Fix by aligning array usage with the intended output section labels.
Fixes: 87bee29099 ("platform:x86: Add Intel Telemetry Debugfs interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251224032053.3915900-1-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8ade833b7 upstream.
Explicitly configure KVM's supported XSS as part of each vendor's setup
flow to fix a bug where clearing SHSTK and IBT in kvm_cpu_caps, e.g. due
to lack of CET XFEATURE support, makes kvm-intel.ko unloadable when nested
VMX is enabled, i.e. when nested=1. The late clearing results in
nested_vmx_setup_{entry,exit}_ctls() clearing VM_{ENTRY,EXIT}_LOAD_CET_STATE
when nested_vmx_setup_ctls_msrs() runs during the CPU compatibility checks,
ultimately leading to a mismatched VMCS config due to the reference config
having the CET bits set, but every CPU's "local" config having the bits
cleared.
Note, kvm_caps.supported_{xcr0,xss} are unconditionally initialized by
kvm_x86_vendor_init(), before calling into vendor code, and not referenced
between ops->hardware_setup() and their current/old location.
Fixes: 69cc3e8865 ("KVM: x86: Add XSS support for CET_KERNEL and CET_USER")
Cc: stable@vger.kernel.org
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: John Allen <john.allen@amd.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Binbin Wu <binbin.wu@linux.intel.com>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260128014310.3255561-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16459fe7e0 upstream.
The original patch inverted the PTE unconditionally to avoid
L1TF-vulnerable PTEs, but Linux doesn't make this adjustment in 2-level
paging.
Adjust the logic to use the flip_protnone_guard() helper, which is a nop
on 2-level paging but inverts the address bits in all other paging modes.
This doesn't matter for the Xen aspect of the original change. Linux no
longer supports running 32bit PV under Xen, and Xen doesn't support
running any 32bit PV guests without using PAE paging.
Link: https://lkml.kernel.org/r/20260126211046.2096622-1-andrew.cooper3@citrix.com
Fixes: b505f19445 ("x86/kfence: avoid writing L1TF-vulnerable PTEs")
Reported-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Closes: https://lore.kernel.org/lkml/CAKFNMokwjw68ubYQM9WkzOuH51wLznHpEOMSqtMoV1Rn9JV_gw@mail.gmail.com/
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2687c848e5 upstream.
Fedora QA reported the following panic:
BUG: unable to handle page fault for address: 0000000040003e54
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20251119-3.fc43 11/19/2025
RIP: 0010:vmware_hypercall4.constprop.0+0x52/0x90
..
Call Trace:
vmmouse_report_events+0x13e/0x1b0
psmouse_handle_byte+0x15/0x60
ps2_interrupt+0x8a/0xd0
...
because the QEMU VMware mouse emulation is buggy, and clears the top 32
bits of %rdi that the kernel kept a pointer in.
The QEMU vmmouse driver saves and restores the register state in a
"uint32_t data[6];" and as a result restores the state with the high
bits all cleared.
RDI originally contained the value of a valid kernel stack address
(0xff5eeb3240003e54). After the vmware hypercall it now contains
0x40003e54, and we get a page fault as a result when it is dereferenced.
The proper fix would be in QEMU, but this works around the issue in the
kernel to keep old setups working, when old kernels had not happened to
keep any state in %rdi over the hypercall.
In theory this same issue exists for all the hypercalls in the vmmouse
driver; in practice it has only been seen with vmware_hypercall3() and
vmware_hypercall4(). For now, just mark RDI/RSI as clobbered for those
two calls. This should have a minimal effect on code generation overall
as it should be rare for the compiler to want to make RDI/RSI live
across hypercalls.
Reported-by: Justin Forbes <jforbes@fedoraproject.org>
Link: https://lore.kernel.org/all/99a9c69a-fc1a-43b7-8d1e-c42d6493b41f@broadcom.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52a0a98549 upstream.
nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU
length or offset exceeds sg_cnt and then use bogus sg->length/offset
values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining
entries, and sg->length/offset before building the bvec.
Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Joonkyo Jung <joonkyoj@yonsei.ac.kr>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 280d654324 ]
In case of subflow disconnect(), which can also happen with the first
subflow in case of errors like timeout or reset, mptcp_subflow_ctx_reset
will reset most fields from the mptcp_subflow_context structure,
including close_event_done. Then, when another subflow is closed, yet
another SUB_CLOSED event for the disconnected initial subflow is sent.
Because of the previous reset, there are no source address and
destination port.
A solution is then to also check the subflow's local id: it shouldn't be
negative anyway.
Another solution would be not to reset subflow->close_event_done at
disconnect time, but when reused. But then, probably the whole reset
could be done when being reused. Let's not change this logic, similar
to TCP with tcp_disconnect().
Fixes: d82809b6c5 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reported-by: Marco Angaroni <marco.angaroni@italtel.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/603
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-1-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a379fa1e2c upstream.
SCX_KICK_WAIT is used to synchronously wait for the target CPU to complete
a reschedule and can be used to implement operations like core scheduling.
This used to be implemented by scx_next_task_picked() incrementing pnt_seq,
which was always called when a CPU picks the next task to run, allowing
SCX_KICK_WAIT to reliably wait for the target CPU to enter the scheduler and
pick the next task.
However, commit b999e365c2 ("sched_ext: Replace scx_next_task_picked()
with switch_class()") replaced scx_next_task_picked() with the
switch_class() callback, which is only called when switching between sched
classes. This broke SCX_KICK_WAIT because pnt_seq would no longer be
reliably incremented unless the previous task was SCX and the next task was
not.
This fix leverages commit 4c95380701 ("sched/ext: Fold balance_scx() into
pick_task_scx()") which refactored the pick path making put_prev_task_scx()
the natural place to track task switches for SCX_KICK_WAIT. The fix moves
pnt_seq increment to put_prev_task_scx() and also increments it in
pick_task_scx() to handle cases where the same task is re-selected, whether
by BPF scheduler decision or slice refill. The semantics: If the current
task on the target CPU is SCX, SCX_KICK_WAIT waits until the CPU enters the
scheduling path. This provides sufficient guarantee for use cases like core
scheduling while keeping the operation self-contained within SCX.
v2: - Also increment pnt_seq in pick_task_scx() to handle same-task
re-selection (Andrea Righi).
- Use smp_cond_load_acquire() for the busy-wait loop for better
architecture optimization (Peter Zijlstra).
Reported-by: Wen-Fang Liu <liuwenfang@honor.com>
Link: http://lkml.kernel.org/r/228ebd9e6ed3437996dffe15735a9caa@honor.com
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9c1fbbd6d upstream.
When a sched_ext scheduler tries to kick a CPU, the CPU may be running a
higher class task. sched_ext has no control over such CPUs. A sched_ext
scheduler couldn't have expected to get access to the CPU after kicking it
anyway. Skip kicking when the target CPU is running a higher class.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 205305c028 upstream.
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251112072709.73755-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e64d1cb21a upstream.
GPIO Address Space handler gets a pointer to the in or out value.
This value is supposed to be at least 64-bit, but it's not limited
to be exactly 64-bit. When ACPI tables are being parsed, for
the bigger Connection():s ACPICA creates a Buffer instead of regular
Integer object. The Buffer exists as long as Namespace holds
the certain Connection(). Hence we can access the necessary bits
without worrying. On the other hand, the left shift, used in
the code, is limited by 31 (on 32-bit platforms) and otherwise
considered to be Undefined Behaviour. Also the code uses only
the first 64-bit word for the value, and anything bigger than 63
will be also subject to UB. Fix all this by modifying the code
to correctly set or clear the respective bit in the bitmap constructed
of 64-bit words.
Fixes: 59084c564c41 ("gpiolib: acpi: use BIT_ULL() for u64 mask in address space handler")
Fixes: 2c4d00cb8f ("gpiolib: acpi: Use BIT() macro to increase readability")
Cc: stable@vger.kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095918.4157491-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80f1a2c233 upstream.
The Enable bits in CMDQV/VINTF/VCMDQ_CONFIG registers do not actually reset
the HW registers. So, the driver explicitly clears all the registers when a
VINTF or VCMDQ is being initialized calling its hw_deinit() function.
However, a userspace VCMDQ is not properly reset, unlike an in-kernel VCMDQ
getting reset in tegra241_vcmdq_hw_init().
Meanwhile, tegra241_vintf_hw_init() calling tegra241_vintf_hw_deinit() will
not deinit any VCMDQ, since there is no userspace VCMDQ mapped to the VINTF
at that stage.
Then, this may result in dirty VCMDQ registers, which can fail the VM.
Like tegra241_vcmdq_hw_init(), reset a VCMDQ in tegra241_vcmdq_hw_init() to
fix this bug. This is required by a host kernel.
Fixes: 6717f26ab1e7 ("iommu/tegra241-cmdqv: Add user-space use support")
Cc: stable@vger.kernel.org
Reported-by: Bao Nguyen <ncqb@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1defcdc44 upstream.
The EXEC_COUNT field must be > 0. In the gfx shadow
handling we always emit a cond_exec packet after the gfx_shadow
packet, but the EXEC_COUNT never gets patched. This leads
to a hang when we try and reset queues on gfx11 APUs.
Fixes: c68cbbfd54 ("drm/amdgpu: cleanup conditional execution")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba205ac3d6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b1ecc9377 upstream.
On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and
ih2 interrupt ring buffers are not initialized. This is by design, as
these secondary IH rings are only available on discrete GPUs. See
vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when
AMD_IS_APU is set.
However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to
get the timestamp of the last interrupt entry. When retry faults are
enabled on APUs (noretry=0), this function is called from the SVM page
fault recovery path, resulting in a NULL pointer dereference when
amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[].
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000004
RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu]
Call Trace:
amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu]
svm_range_restore_pages+0xae5/0x11c0 [amdgpu]
amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu]
gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu]
amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu]
amdgpu_ih_process+0x84/0x100 [amdgpu]
This issue was exposed by commit 1446226d32 ("drm/amdgpu: Remove GC HW
IP 9.3.0 from noretry=1") which changed the default for Renoir APU from
noretry=1 to noretry=0, enabling retry fault handling and thus
exercising the buggy code path.
Fix this by adding a check for ih1.ring_size before attempting to use
it. Also restore the soft_ih support from commit dd29944165 ("drm/amdgpu:
Rework retry fault removal"). This is needed if the hardware doesn't
support secondary HW IH rings.
v2: additional updates (Alex)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3814
Fixes: dd29944165 ("drm/amdgpu: Rework retry fault removal")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6ce8d536c8)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfd64f6e8c upstream.
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. Align with gfx11.
v2: preserve init and remap for MMIO case.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a6d6ed694)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9077d32a4b upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a2918f958d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3eb46fbb60 upstream.
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. This fixes queue reset failures
on APUs.
v2: preserve init and remap for MMIO case.
Fixes: b3e9bfd866 ("drm/amdgpu/gfx11: add ring reset callbacks")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b340ff216f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1f810471c upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1f16866bdb)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc4f433b14 upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e80b1d1aa1)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7fbff9e76 upstream.
The reference clock is supposed to be 100Mhz, but it
appears to actually be slightly lower (99.81Mhz).
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/14451
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 637fee3954)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 239d0ccf56 upstream.
v1:
resolve the issue where some freq frequencies cannot be set correctly
due to insufficient floating-point precision.
v2:
patch this convert on 'max' value only.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 53868dd877)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c764b7af15 upstream.
v1:
resolve the issue where some freq frequencies cannot be set correctly
due to insufficient floating-point precision.
v2:
patch this convert on 'max' value only.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6194f60c70)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e535c23513 upstream.
Make sure to drop the reference taken to the DDC device during probe on
probe failure (e.g. probe deferral) and on driver unbind.
Fixes: fcbc51e54d ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Cc: stable@vger.kernel.org # 3.10
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251030163456.15807-1-johan@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dedb897f11 upstream.
The hw clock gating register sequence consists of register value pairs
that are written to the GPU during initialisation.
The a690 hwcg sequence has two GMU registers in it that used to amount
to random writes in the GPU mapping, but since commit 188db3d7fe
("drm/msm/a6xx: Rebase GMU register offsets") they trigger a fault as
the updated offsets now lie outside the mapping. This in turn breaks
boot of machines like the Lenovo ThinkPad X13s.
Note that the updates of these GMU registers is already taken care of
properly since commit 40c297eb24 ("drm/msm/a6xx: Set GMU CGC
properties on a6xx too"), but for some reason these two entries were
left in the table.
Fixes: 5e7665b5e4 ("drm/msm/adreno: Add Adreno A690 support")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Fixes: 188db3d7fe ("drm/msm/a6xx: Rebase GMU register offsets")
Patchwork: https://patchwork.freedesktop.org/patch/695778/
Message-ID: <20251221164552.19990-1-johan@kernel.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
(cherry picked from commit dcbd2f8280)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0581f6ab9 upstream.
Tyr needs `CONFIG_COMMON_CLK` to build:
error[E0432]: unresolved import `kernel::clk::Clk`
--> drivers/gpu/drm/tyr/driver.rs:3:5
|
3 | use kernel::clk::Clk;
| ^^^^^^^^^^^^^^^^ no `Clk` in `clk`
error[E0432]: unresolved import `kernel::clk::OptionalClk`
--> drivers/gpu/drm/tyr/driver.rs:4:5
|
4 | use kernel::clk::OptionalClk;
| ^^^^^^^^^^^^^^^^^^^^^^^^ no `OptionalClk` in `clk`
Thus add the dependency to fix it.
Fixes: cf4fd52e32 ("rust: drm: Introduce the Tyr driver for Arm Mali GPUs")
Cc: stable@vger.kernel.org
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260124160948.67508-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12f15d52d3 upstream.
Since GEM bo handles are u32 in the uapi and the internal implementation
uses idr_alloc() which uses int ranges, passing a new handle larger than
INT_MAX trivially triggers a kernel warning:
idr_alloc():
...
if (WARN_ON_ONCE(start < 0))
return -EINVAL;
...
Fix it by rejecting new handles above INT_MAX and at the same time make
the end limit calculation more obvious by moving into int domain.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reported-by: Zhi Wang <wangzhi@stu.xidian.edu.cn>
Fixes: 53096728b8 ("drm: Add DRM prime interface to reassign GEM handle")
Cc: David Francis <David.Francis@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org> # v6.18+
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260123141540.76540-1-tvrtko.ursulin@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5157c328ed upstream.
Add a dependency edge from `compiler_builtins` to `core` to
`scripts/generate_rust_analyzer.py` to match `rust/Makefile`. This has
been incorrect since commit 8c4555ccc5 ("scripts: add
`generate_rust_analyzer.py`")
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Jesung Yang <y.j3ms.n@gmail.com>
Acked-by: Benno Lossin <lossin@kernel.org>
Fixes: 8c4555ccc5 ("scripts: add `generate_rust_analyzer.py`")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250723-rust-analyzer-pin-init-v1-1-3c6956173c78@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
