[ Upstream commit 469ddb20ca ]
Without this patch, the IPQ5018 WiFi will fail and print the following
logs:
[ 11.033179] ath11k c000000.wifi: unsupported device type 7
[ 11.033223] ath11k: probe of c000000.wifi failed with error -95
Fixes: 25edca7bb1 ("wifi: ath11k: add ipq5018 device support")
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/TYZPR01MB5556D7AA10ABEDDDD2D8F39EC953A@TYZPR01MB5556.apcprd01.prod.exchangelabs.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16e0077e14 ]
Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap(), same as in
ath11k_qmi_load_file_target_mem().
Fixes: 6ac04bdc5e ("ath11k: Use reserved host DDR addresses from DT for PCI devices")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230608022858.27405-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa0e21fa44 ]
This filter already exists for excluding IPv6 SNMP stats. Extend its
definition to also exclude IFLA_VF_INFO stats in RTM_GETLINK.
This patch constitutes a partial fix for a netlink attribute nesting
overflow bug in IFLA_VFINFO_LIST. By excluding the stats when the
requester doesn't need them, the truncation of the VF list is avoided.
While it was technically only the stats added in commit c5a9f6f0ab
("net/core: Add drop counters to VF statistics") breaking the camel's
back, the appreciable size of the stats data should never have been
included without due consideration for the maximum number of VFs
supported by PCI.
Fixes: 3b766cd832 ("net/core: Add reading VF statistics through the PF netdevice")
Fixes: c5a9f6f0ab ("net/core: Add drop counters to VF statistics")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Cc: Edwin Peer <espeer@gmail.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20230611105108.122586-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b69d242e2 ]
The program counter address is read from the TLV and
PC address is printed in debug messages.
Read the value at PC address and print the value
instead of the register address.
Fixes: 5e31b3df86 ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.e5a5f18f1b2c.Ib6117a4e7f66a075913241cc81477c0059953d5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d507812cb ]
sta_init function can fail and if it returns an error then
driver should not send the request to fw to add a station.
Fixes: 69aef84805 ("wifi: iwlwifi: mvm: refactor iwl_mvm_add_sta(), iwl_mvm_rm_sta()")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.1ecd293539e8.I5ec6aab387bb2fe743a7402581beaeb9c801d31f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cacadc0db ]
The entry should be a read only one and not a write only one. Fix it.
Fixes: 3d90110292 ("wifi: mac80211: implement link switching")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230611121219.c75316990411.I1565a7fcba8a37f83efffb0cc6b71c572b896e94@changeid
[remove x16 change since it doesn't work yet]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ffc85d929 ]
Make sure that the following unsafe example is rejected by verifier:
1: r9 = ... some pointer with range X ...
2: r6 = ... unbound scalar ID=a ...
3: r7 = ... unbound scalar ID=b ...
4: if (r6 > r7) goto +1
5: r6 = r7
6: if (r6 > X) goto ...
[ Upstream commit 904e6ddf41 ]
Change mark_chain_precision() to track precision in situations
like below:
r2 = unknown value
...
--- state #0 ---
...
r1 = r2 // r1 and r2 now share the same ID
...
--- state #1 {r1.id = A, r2.id = A} ---
...
if (r2 > 10) goto exit; // find_equal_scalars() assigns range to r1
...
--- state #2 {r1.id = A, r2.id = A} ---
r3 = r10
r3 += r1 // need to mark both r1 and r2
At the beginning of the processing of each state, ensure that if a
register with a scalar ID is marked as precise, all registers sharing
this ID are also marked as precise.
This property would be used by a follow-up change in regsafe().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230613153824.3324830-2-eddyz87@gmail.com
Stable-dep-of: 1ffc85d929 ("bpf: Verify scalar ids mapping in regsafe() using check_ids()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75086cc6de ]
On EDMA capable hardware, ath9k_txq_list_has_key() can enter infinite
loop if it is called while all txq_fifos have packets that use different
key that the one we are looking for. Fix it by exiting the loop if all
txq_fifos have been checked already.
Because this loop is called under spin_lock_bh() (see ath_txq_lock) it
causes the following rcu stall:
rcu: INFO: rcu_sched self-detected stall on CPU
ath10k_pci 0000:01:00.0: failed to read temperature -11
rcu: 1-....: (5254 ticks this GP) idle=189/1/0x4000000000000002 softirq=8442983/8442984 fqs=2579
(t=5257 jiffies g=17983297 q=334)
Task dump for CPU 1:
task:hostapd state:R running task stack: 0 pid: 297 ppid: 289 flags:0x0000000a
Call trace:
dump_backtrace+0x0/0x170
show_stack+0x1c/0x24
sched_show_task+0x140/0x170
dump_cpu_task+0x48/0x54
rcu_dump_cpu_stacks+0xf0/0x134
rcu_sched_clock_irq+0x8d8/0x9fc
update_process_times+0xa0/0xec
tick_sched_timer+0x5c/0xd0
__hrtimer_run_queues+0x154/0x320
hrtimer_interrupt+0x120/0x2f0
arch_timer_handler_virt+0x38/0x44
handle_percpu_devid_irq+0x9c/0x1e0
handle_domain_irq+0x64/0x90
gic_handle_irq+0x78/0xb0
call_on_irq_stack+0x28/0x38
do_interrupt_handler+0x54/0x5c
el1_interrupt+0x2c/0x4c
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x74/0x78
ath9k_txq_has_key+0x1bc/0x250 [ath9k]
ath9k_set_key+0x1cc/0x3dc [ath9k]
drv_set_key+0x78/0x170
ieee80211_key_replace+0x564/0x6cc
ieee80211_key_link+0x174/0x220
ieee80211_add_key+0x11c/0x300
nl80211_new_key+0x12c/0x330
genl_family_rcv_msg_doit+0xbc/0x11c
genl_rcv_msg+0xd8/0x1c4
netlink_rcv_skb+0x40/0x100
genl_rcv+0x3c/0x50
netlink_unicast+0x1ec/0x2c0
netlink_sendmsg+0x198/0x3c0
____sys_sendmsg+0x210/0x250
___sys_sendmsg+0x78/0xc4
__sys_sendmsg+0x4c/0x90
__arm64_sys_sendmsg+0x28/0x30
invoke_syscall.constprop.0+0x60/0x100
do_el0_svc+0x48/0xd0
el0_svc+0x14/0x50
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x158/0x15c
This rcu stall is hard to reproduce as is, but changing ATH_TXFIFO_DEPTH
from 8 to 2 makes it reasonably easy to reproduce.
Fixes: ca2848022c ("ath9k: Postpone key cache entry deletion for TXQ frames reference it")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609093744.1985-1-repk@triplefau.lt
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b23ed4d74c ]
Dan Carpenter reported invalid check for calloc() result in
test_verifier.c:get_xlated_program():
./tools/testing/selftests/bpf/test_verifier.c:1365 get_xlated_program()
warn: variable dereferenced before check 'buf' (see line 1364)
./tools/testing/selftests/bpf/test_verifier.c
1363 *cnt = xlated_prog_len / buf_element_size;
1364 *buf = calloc(*cnt, buf_element_size);
1365 if (!buf) {
This should be if (!*buf) {
1366 perror("can't allocate xlated program buffer");
1367 return -ENOMEM;
This commit refactors the get_xlated_program() to avoid using double
pointer type.
Fixes: 933ff53191 ("selftests/bpf: specify expected instructions in test_verifier tests")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/bpf/ZH7u0hEGVB4MjGZq@moroto/
Link: https://lore.kernel.org/bpf/20230609221637.2631800-1-eddyz87@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 434587df9f ]
There are no other files referencing this function, apparently
it was left global to avoid an 'unused function' warning when
the only caller is left out. With a 'W=1' build, it causes
a 'missing prototype' warning though:
drivers/memstick/host/r592.c:47:13: error: no previous prototype for 'memstick_debug_get_tpc_name' [-Werror=missing-prototypes]
Annotate the function as 'static __maybe_unused' to avoid both
problems.
Fixes: 9263412501 ("memstick: add driver for Ricoh R5C592 card reader")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516202714.560929-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3332b7aad ]
When I boot a kukui-kodama board, I see an ugly warning in my kernel
log:
mtk-msdc 11240000.mmc: error -ENXIO: IRQ sdio_wakeup not found
It's pretty normal not to have an "sdio_wakeup" IRQ defined. In fact,
no device trees in mainline seem to have it. Let's use the
platform_get_irq_byname_optional() to avoid the error message.
Fixes: 527f36f5ef ("mmc: mediatek: add support for SDIO eint wakup IRQ")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230510064434.1.I935404c5396e6bf952e99bb7ffb744c6f7fd430b@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cba6c4309 ]
Patch series "kexec: enable kexec_crash_size to support two crash kernel
regions".
When crashkernel=X fails to reserve region under 4G, it will fall back to
reserve region above 4G and a region of the default size will also be
reserved under 4G. Unfortunately, /sys/kernel/kexec_crash_size only
supports one crash kernel region now, the user cannot sense the low memory
reserved by reading /sys/kernel/kexec_crash_size. Also, low memory cannot
be freed by writing this file.
For example:
resource_size(crashk_res) = 512M
resource_size(crashk_low_res) = 256M
The result of 'cat /sys/kernel/kexec_crash_size' is 512M, but it should be
768M. When we execute 'echo 0 > /sys/kernel/kexec_crash_size', the size
of crashk_res becomes 0 and resource_size(crashk_low_res) is still 256 MB,
which is incorrect.
Since crashk_res manages the memory with high address and crashk_low_res
manages the memory with low address, crashk_low_res is shrunken only when
all crashk_res is shrunken. And because when there is only one crash
kernel region, crashk_res is always used. Therefore, if all crashk_res is
shrunken and crashk_low_res still exists, swap them.
This patch (of 6):
If the value of parameter 'new_size' is in the semi-open and semi-closed
interval (crashk_res.end - KEXEC_CRASH_MEM_ALIGN + 1, crashk_res.end], the
calculation result of ram_res is:
ram_res->start = crashk_res.end + 1
ram_res->end = crashk_res.end
The operation of insert_resource() fails, and ram_res is not added to
iomem_resource. As a result, the memory of the control block ram_res is
leaked.
In fact, on all architectures, the start address and size of crashk_res
are already aligned by KEXEC_CRASH_MEM_ALIGN. Therefore, we do not need
to round up crashk_res.start again. Instead, we should round up
'new_size' in advance.
Link: https://lkml.kernel.org/r/20230527123439.772-1-thunder.leizhen@huawei.com
Link: https://lkml.kernel.org/r/20230527123439.772-2-thunder.leizhen@huawei.com
Fixes: 6480e5a092 ("kdump: add missing RAM resource in crash_shrink_memory()")
Fixes: 06a7f71124 ("kexec: premit reduction of the reserved memory size")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4379e59fe5 ]
Currently, in the watchdog_overflow_callback() we first check to see if
the watchdog had been touched and _then_ we handle the workaround for
turbo mode. This order should be reversed.
Specifically, "touching" the hardlockup detector's watchdog should avoid
lockups being detected for one period that should be roughly the same
regardless of whether we're running turbo or not. That means that we
should do the extra accounting for turbo _before_ we look at (and clear)
the global indicating that we've been touched.
NOTE: this fix is made based on code inspection. I am not aware of any
reports where the old code would have generated false positives. That
being said, this order seems more correct and also makes it easier down
the line to share code with the "buddy" hardlockup detector.
Link: https://lkml.kernel.org/r/20230519101840.v5.2.I843b0d1de3e096ba111a179f3adb16d576bef5c7@changeid
Fixes: 7edaeb6841 ("kernel/watchdog: Prevent false positives with turbo modes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e008df11c ]
Patch series "watchdog/hardlockup: Add the buddy hardlockup detector", v5.
This patch series adds the "buddy" hardlockup detector. In brief, the
buddy hardlockup detector can detect hardlockups without arch-level
support by having CPUs checkup on a "buddy" CPU periodically.
Given the new design of this patch series, testing all combinations is
fairly difficult. I've attempted to make sure that all combinations of
CONFIG_ options are good, but it wouldn't surprise me if I missed
something. I apologize in advance and I'll do my best to fix any
problems that are found.
This patch (of 18):
The real watchdog_update_hrtimer_threshold() is defined in
kernel/watchdog_hld.c. That file is included if
CONFIG_HARDLOCKUP_DETECTOR_PERF and the function is defined in that file
if CONFIG_HARDLOCKUP_CHECK_TIMESTAMP.
The dummy version of the function in "nmi.h" didn't get that quite right.
While this doesn't appear to be a huge deal, it's nice to make it
consistent.
It doesn't break builds because CHECK_TIMESTAMP is only defined by x86 so
others don't get a double definition, and x86 uses perf lockup detector,
so it gets the out of line version.
Link: https://lkml.kernel.org/r/20230519101840.v5.18.Ia44852044cdcb074f387e80df6b45e892965d4a1@changeid
Link: https://lkml.kernel.org/r/20230519101840.v5.1.I8cbb2f4fa740528fcfade4f5439b6cdcdd059251@changeid
Fixes: 7edaeb6841 ("kernel/watchdog: Prevent false positives with turbo modes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Cc: Colin Cross <ccross@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19ab365762 ]
Since commit f079a020ba ("selftests: memcg: factor out common parts of
memory.{low,min} tests"), the value used in second alloc_anon has changed
from 148M to 170M. Because memory.low allows reclaiming page cache in
child cgroups, so the memory.current is close to 30M instead of 50M.
Therefore, adjust the expected value of parent cgroup.
Link: https://lkml.kernel.org/r/20230522095233.4246-2-haifeng.xu@shopee.com
Fixes: f079a020ba ("selftests: memcg: factor out common parts of memory.{low,min} tests")
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e8b2c88fc ]
The ice_ptp_extts_work() and ice_ptp_periodic_work() functions are both
scheduled on the same kthread worker, pf.ptp.kworker. The
ice_ptp_periodic_work() function sends to the firmware to interact with the
PHY, and must block to wait for responses.
This can cause delay in responding to the PFINT_OICR_TSYN_EVNT interrupt
cause, ultimately resulting in disruption to processing an input signal of
the frequency is high enough. In our testing, even 100 Hz signals get
disrupted.
Fix this by instead processing the signal inside the miscellaneous
interrupt thread prior to handling Tx timestamps.
Use atomic bits in a new pf->misc_thread bitmap in order to safely
communicate which tasks require processing within the
ice_misc_intr_thread_fn(). This ensures the communication of desired tasks
from the ice_misc_intr() are correctly processed without racing even in the
event that the interrupt triggers again before the thread function exits.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e74f562328 ]
It makes no sense to set MMC_PM_KEEP_POWER in shutdown. The flag
indicates to the MMC subsystem to keep the slot powered on during
suspend, but in shutdown the slot should actually be powered off.
Drop this call.
Fixes: 063848c3e1 ("rsi: sdio: Add WOWLAN support for S5 shutdown state")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527222859.273768-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b241e26082 ]
In case WoWlan was never configured during the operation of the system,
the hw->wiphy->wowlan_config will be NULL. rsi_config_wowlan() checks
whether wowlan_config is non-NULL and if it is not, then WARNs about it.
The warning is valid, as during normal operation the rsi_config_wowlan()
should only ever be called with non-NULL wowlan_config. In shutdown this
rsi_config_wowlan() should only ever be called if WoWlan was configured
before by the user.
Add checks for non-NULL wowlan_config into the shutdown hook. While at it,
check whether the wiphy is also non-NULL before accessing wowlan_config .
Drop the single-use wowlan_config variable, just inline it into function
call.
Fixes: 16bbc3eb83 ("rsi: fix null pointer dereference during rsi_shutdown()")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527222833.273741-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a76c7ca9e ]
The spi geni driver in SE DMA mode, unlike GSI DMA, is not making use of
DMA mapping functionality available in the framework.
The driver does mapping internally which makes dma buffer fields available
in spi_transfer struct superfluous while requiring additional members in
spi_geni_master struct.
Conform to the design by having framework handle map/unmap and do only
DMA transfer in the driver; this also simplifies code a bit.
Fixes: e5f0dfa78a ("spi: spi-geni-qcom: Add support for SE DMA mode")
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1684325894-30252-3-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d6e575949 ]
The geni_se_xx_dma_prep() interfaces necessarily do DMA mapping before
initiating DMA transfers. This is not suitable for spi where framework
is expected to handle map/unmap.
Expose new interfaces geni_se_xx_init_dma() which do only DMA transfer.
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1684325894-30252-2-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 3a76c7ca9e ("spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 095641817e ]
Dan Carpenter found via Smatch static checker, that unsigned 'mtu_lo' is
never less than zero.
Variable mtu_lo should have been an 'int', because read_mtu_device_lo()
uses minus as error indications.
Fixes: b62eba5632 ("selftests/bpf: Tests using bpf_check_mtu BPF-helper")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/bpf/168605104733.3636467.17945947801753092590.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba7af2654e ]
When adding a new link to a station, this needs to cause a
recalculation of the minimum chandef since otherwise we can
have a higher bandwidth station connected on that link than
the link is operating at. Do the appropriate recalc.
Fixes: cb71f1d136 ("wifi: mac80211: add sta link addition/removal")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.377adf3c789a.I91bf28f399e16e6ac1f83bacd1029a698b4e6685@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ead65aa2d5 ]
If there's no peer configured then there's no point in sending
the command down to the firmware with an invalid peer address.
Fixes: cf85123a21 ("wifi: iwlwifi: mvm: support enabling and disabling HW timestamping")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194630.0fb9f81f1852.Idcc41b67d1fbb421e5ed9bac2177b948b7b4d1c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edd75c8028 ]
Building BPF selftests with custom HOSTCFLAGS yields an error:
# make HOSTCFLAGS="-O2"
[...]
HOSTCC ./tools/testing/selftests/bpf/tools/build/resolve_btfids/main.o
main.c:73:10: fatal error: linux/rbtree.h: No such file or directory
73 | #include <linux/rbtree.h>
| ^~~~~~~~~~~~~~~~
The reason is that tools/bpf/resolve_btfids/Makefile passes header
include paths by extending HOSTCFLAGS which is overridden by setting
HOSTCFLAGS in the make command (because of Makefile rules [1]).
This patch fixes the above problem by passing the include paths via
`HOSTCFLAGS_resolve_btfids` which is used by tools/build/Build.include
and can be combined with overridding HOSTCFLAGS.
[1] https://www.gnu.org/software/make/manual/html_node/Overriding.html
Fixes: 56a2df7615 ("tools/resolve_btfids: Compile resolve_btfids as host program")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230530123352.1308488-1-vmalik@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7793fc3bab ]
This patch fixes an incorrect assumption made in the original
bpf_refcount series [0], specifically that the BPF program calling
bpf_refcount_acquire on some node can always guarantee that the node is
alive. In that series, the patch adding failure behavior to rbtree_add
and list_push_{front, back} breaks this assumption for non-owning
references.
Consider the following program:
n = bpf_kptr_xchg(&mapval, NULL);
/* skip error checking */
bpf_spin_lock(&l);
if(bpf_rbtree_add(&t, &n->rb, less)) {
bpf_refcount_acquire(n);
/* Failed to add, do something else with the node */
}
bpf_spin_unlock(&l);
It's incorrect to assume that bpf_refcount_acquire will always succeed in this
scenario. bpf_refcount_acquire is being called in a critical section
here, but the lock being held is associated with rbtree t, which isn't
necessarily the lock associated with the tree that the node is already
in. So after bpf_rbtree_add fails to add the node and calls bpf_obj_drop
in it, the program has no ownership of the node's lifetime. Therefore
the node's refcount can be decr'd to 0 at any time after the failing
rbtree_add. If this happens before the refcount_acquire above, the node
might be free'd, and regardless refcount_acquire will be incrementing a
0 refcount.
Later patches in the series exercise this scenario, resulting in the
expected complaint from the kernel (without this patch's changes):
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 207 at lib/refcount.c:25 refcount_warn_saturate+0xbc/0x110
Modules linked in: bpf_testmod(O)
CPU: 1 PID: 207 Comm: test_progs Tainted: G O 6.3.0-rc7-02231-g723de1a718a2-dirty #371
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0xbc/0x110
Code: 6f 64 f6 02 01 e8 84 a3 5c ff 0f 0b eb 9d 80 3d 5e 64 f6 02 00 75 94 48 c7 c7 e0 13 d2 82 c6 05 4e 64 f6 02 01 e8 64 a3 5c ff <0f> 0b e9 7a ff ff ff 80 3d 38 64 f6 02 00 0f 85 6d ff ff ff 48 c7
RSP: 0018:ffff88810b9179b0 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000202 RSI: 0000000000000008 RDI: ffffffff857c3680
RBP: ffff88810027d3c0 R08: ffffffff8125f2a4 R09: ffff88810b9176e7
R10: ffffed1021722edc R11: 746e756f63666572 R12: ffff88810027d388
R13: ffff88810027d3c0 R14: ffffc900005fe030 R15: ffffc900005fe048
FS: 00007fee0584a700(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005634a96f6c58 CR3: 0000000108ce9002 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
bpf_refcount_acquire_impl+0xb5/0xc0
(rest of output snipped)
The patch addresses this by changing bpf_refcount_acquire_impl to use
refcount_inc_not_zero instead of refcount_inc and marking
bpf_refcount_acquire KF_RET_NULL.
For owning references, though, we know the above scenario is not possible
and thus that bpf_refcount_acquire will always succeed. Some verifier
bookkeeping is added to track "is input owning ref?" for bpf_refcount_acquire
calls and return false from is_kfunc_ret_null for bpf_refcount_acquire on
owning refs despite it being marked KF_RET_NULL.
Existing selftests using bpf_refcount_acquire are modified where
necessary to NULL-check its return value.
[0]: https://lore.kernel.org/bpf/20230415201811.343116-1-davemarchevsky@fb.com/
Fixes: d2dcc67df9 ("bpf: Migrate bpf_rbtree_add and bpf_list_push_{front,back} to possibly fail")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230602022647.1571784-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc0d76cafe ]
Given the pointer to struct bpf_{rb,list}_node within a local kptr and
the byte offset of that field within the kptr struct, the calculation changed
by this patch is meant to find the beginning of the kptr so that it can
be passed to bpf_obj_drop.
Unfortunately instead of doing
ptr_to_kptr = ptr_to_node_field - offset_bytes
the calculation is erroneously doing
ptr_to_ktpr = ptr_to_node_field - (offset_bytes * sizeof(struct bpf_rb_node))
or the bpf_list_node equivalent.
This patch fixes the calculation.
Fixes: d2dcc67df9 ("bpf: Migrate bpf_rbtree_add and bpf_list_push_{front,back} to possibly fail")
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230602022647.1571784-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2140a6e342 ]
In verifier.c, fixup_kfunc_call uses struct bpf_insn_aux_data's
kptr_struct_meta field to pass information about local kptr types to
various helpers and kfuncs at runtime. The recent bpf_refcount series
added a few functions to the set that need this information:
* bpf_refcount_acquire
* Needs to know where the refcount field is in order to increment
* Graph collection insert kfuncs: bpf_rbtree_add, bpf_list_push_{front,back}
* Were migrated to possibly fail by the bpf_refcount series. If
insert fails, the input node is bpf_obj_drop'd. bpf_obj_drop needs
the kptr_struct_meta in order to decr refcount and properly free
special fields.
Unfortunately the verifier handling of collection insert kfuncs was not
modified to actually populate kptr_struct_meta. Accordingly, when the
node input to those kfuncs is passed to bpf_obj_drop, it is done so
without the information necessary to decr refcount.
This patch fixes the issue by populating kptr_struct_meta for those
kfuncs.
Fixes: d2dcc67df9 ("bpf: Migrate bpf_rbtree_add and bpf_list_push_{front,back} to possibly fail")
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230602022647.1571784-3-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d585f48ee ]
For kfuncs like bpf_obj_drop and bpf_refcount_acquire - which take
user-defined types as input - the verifier needs to track the specific
type passed in when checking a particular kfunc call. This requires
tracking (btf, btf_id) tuple. In commit 7c50b1cb76
("bpf: Add bpf_refcount_acquire kfunc") I added an anonymous union with
inner structs named after the specific kfuncs tracking this information,
with the goal of making it more obvious which kfunc this data was being
tracked / expected to be tracked on behalf of.
In a recent series adding a new user of this tuple, Alexei mentioned
that he didn't like this union usage as it doesn't really help with
readability or bug-proofing ([0]). In an offline convo we agreed to
have the tuple be fields (arg_btf, arg_btf_id), with comments in
bpf_kfunc_call_arg_meta definition enumerating the uses of the fields by
kfunc-specific handling logic. Such a pattern is used by struct
bpf_reg_state without trouble.
Accordingly, this patch removes the anonymous union in favor of arg_btf
and arg_btf_id fields and comment enumerating their current uses. The
patch also removes struct btf_and_id, which was only being used by the
removed union's inner structs.
This is a mechanical change, existing linked_list and rbtree tests will
validate that correct (btf, btf_id) are being passed.
[0]: https://lore.kernel.org/bpf/20230505021707.vlyiwy57vwxglbka@dhcp-172-26-102-232.dhcp.thefacebook.com
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230510213047.1633612-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 2140a6e342 ("bpf: Set kptr_struct_meta for node param to list and rbtree insert funcs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75bd32f5ce ]
Currently, on WCN3990, the station disconnect after hardware recovery is
not working as expected. This is because of setting the
IEEE80211_SDATA_DISCONNECT_HW_RESTART flag very early in the hardware
recovery process even before the driver invokes ieee80211_hw_restart().
On the contrary, mac80211 expects this flag to be set after
ieee80211_hw_restart() is invoked for it to trigger station disconnect.
Set the IEEE80211_SDATA_DISCONNECT_HW_RESTART flag in
ath10k_reconfig_complete() instead to fix this.
The other targets are not affected by this change, since the hardware
params flag is not set.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1
Fixes: 2c3fc50591 ("ath10k: Trigger sta disconnect on hardware restart")
Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230518101515.3820-1-quic_youghand@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60548b825b ]
Default samples/pktgen scripts send 60 byte packets as hardware adds
4-bytes FCS checksum, which fulfils minimum Ethernet 64 bytes frame
size.
XDP layer will not necessary have access to the 4-bytes FCS checksum.
This leads to bpf_xdp_load_bytes() failing as it tries to copy 64-bytes
from an XDP packet that only have 60-bytes available.
Fixes: 7722517422 ("samples/bpf: fixup some tools to be able to support xdp multibuffer")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/bpf/168545704139.2996228.2516528552939485216.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f1784a59c ]
When receiving more rx packets than the kernel can handle the driver
drops the packets and issues an error message. This is bad for two
reasons. The logs are flooded with myriads of messages, but then time
consumed for printing messages in that critical code path brings down
the device. After some time of excessive rx load the driver responds
with:
rtw_8822cu 1-1:1.2: failed to get tx report from firmware
rtw_8822cu 1-1:1.2: firmware failed to report density after scan
rtw_8822cu 1-1:1.2: firmware failed to report density after scan
The device stops working until being replugged.
Fix this by lowering the priority to debug level and also by
ratelimiting it.
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230524103934.1019096-1-s.hauer@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061b0cb932 ]
A bad USB device is able to construct a service connection response
message with target endpoint being ENDPOINT0 which is reserved for
HTC_CTRL_RSVD_SVC and should not be modified to be used for any other
services.
Reject such service connection responses.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: syzbot+b68fbebe56d8362907e8@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230516150427.79469-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f8d66a9fb ]
Should ray_config() fail, some resources need to be released as already
done in the remove function.
While at it, remove a useless and erroneous comment. The probe is
ray_probe(), not ray_attach().
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/8c544d18084f8b37dd108e844f7e79e85ff708ff.1684570373.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 391af06a02 ]
Should wl3501_config() fail, some resources need to be released as already
done in the remove function.
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7cc9c9316489b7d69b36aeb0edd3123538500b41.1684569865.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b92e4351a ]
Should atmel_config() fail, some resources need to be released as already
done in the remove function.
While at it, remove a useless and erroneous comment. The probe is
atmel_probe(), not atmel_attach().
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1e65f174607a83348034197fa7d603bab10ba4a9.1684569156.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67a81d911c ]
Should orinoco_cs_config() fail, some resources need to be released as
already done in the remove function.
While at it, remove a useless and erroneous comment. The probe is
orinoco_cs_probe(), not orinoco_cs_attach().
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/e24735ce4d82901d5f7ea08419eea53bfdde3d65.1684568286.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9252443251 ]
Should spectrum_cs_config() fail, some resources need to be released as
already done in the remove function.
While at it, remove a useless and erroneous comment. The probe is
spectrum_cs_probe(), not spectrum_cs_attach().
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/c0bc0c21c58ca477fc5521607615bafbf2aef8eb.1684567733.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08880713ce ]
If CONFIG_DEBUG_FS is not set:
regulator: Failed to create debugfs directory
...
regulator-dummy: Failed to create debugfs directory
As per the comments for debugfs_create_dir(), errors returned by this
function should be expected, and ignored:
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned.
*
* NOTE: it's expected that most callers should _ignore_ the errors returned
* by this function. Other debugfs functions handle the fact that the "dentry"
* passed to them could be an error and they don't crash in that case.
* Drivers should generally work fine even if debugfs fails to init anyway.
Adhere to the debugfs spirit, and streamline all operations by:
1. Demoting the importance of the printed error messages to debug
level, like is already done in create_regulator(),
2. Further ignoring any returned errors, as by design, all debugfs
functions are no-ops when passed an error pointer.
Fixes: 2bf1c45be3 ("regulator: Fix error checking for debugfs_create_dir")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2f8bb6e113359ddfab7b59e4d4274bd4c06d6d0a.1685013051.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2715bb11cf ]
In case of failure, debugfs_create_dir() does not return NULL, but an
error pointer. Most incorrect error checks were fixed, but the one in
create_regulator() was forgotten.
Fix the remaining error check.
Fixes: 2bf1c45be3 ("regulator: Fix error checking for debugfs_create_dir")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ee980a108b5854dd8ce3630f8f673e784e057d17.1685013051.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b9e86d445 ]
If the probe routine fails with -EPROBE_DEFER after taking over the
OF node from its parent driver, reprobing triggers pinctrl_bind_pins()
and that will fail. Fix this by setting of_node_reused, so that the
device does not try to setup pin muxing.
For me this always happens once the driver is marked to prefer async
probing and never happens without that flag.
Fixes: 259b93b21a ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-12-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f04a32b2c5 ]
The sign-file utility (from scripts/) is used in prog_tests/verify_pkcs7_sig.c,
but the utility should not be called as a test. Executing this utility produces
the following error:
selftests: /linux/tools/testing/selftests/bpf: urandom_read
ok 16 selftests: /linux/tools/testing/selftests/bpf: urandom_read
selftests: /linux/tools/testing/selftests/bpf: sign-file
not ok 17 selftests: /linux/tools/testing/selftests/bpf: sign-file # exit=2
Also, urandom_read is mistakenly used as a test. It does not lead to an error,
but should be moved over to TEST_GEN_FILES as well. The empty TEST_CUSTOM_PROGS
can then be removed.
Fixes: fc97590668 ("selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfunc")
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/ZEuWFk3QyML9y5QQ@example.org
Link: https://lore.kernel.org/bpf/88e3ab23029d726a2703adcf6af8356f7a2d3483.1684316821.git.legion@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 108598c39e ]
If it fails to attach fentry, the allocated bpf trampoline image will be
left in the system. That can be verified by checking /proc/kallsyms.
This meamleak can be verified by a simple bpf program as follows:
SEC("fentry/trap_init")
int fentry_run()
{
return 0;
}
It will fail to attach trap_init because this function is freed after
kernel init, and then we can find the trampoline image is left in the
system by checking /proc/kallsyms.
$ tail /proc/kallsyms
ffffffffc0613000 t bpf_trampoline_6442453466_1 [bpf]
ffffffffc06c3000 t bpf_trampoline_6442453466_1 [bpf]
$ bpftool btf dump file /sys/kernel/btf/vmlinux | grep "FUNC 'trap_init'"
[2522] FUNC 'trap_init' type_id=119 linkage=static
$ echo $((6442453466 & 0x7fffffff))
2522
Note that there are two left bpf trampoline images, that is because the
libbpf will fallback to raw tracepoint if -EINVAL is returned.
Fixes: e21aa34178 ("bpf: Fix fexit trampoline.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Link: https://lore.kernel.org/bpf/20230515130849.57502-2-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47e79cbeea ]
After commit e21aa34178 ("bpf: Fix fexit trampoline."), the selector is only
used to indicate how many times the bpf trampoline image are updated and been
displayed in the trampoline ksym name. After the trampoline is freed, the
selector will start from 0 again. So the selector is a useless value to the
user. We can remove it.
If the user want to check whether the bpf trampoline image has been updated
or not, the user can compare the address. Each time the trampoline image is
updated, the address will change consequently. Jiri also pointed out another
issue that perf is still using the old name "bpf_trampoline_%lu", so this
change can fix the issue in perf.
Fixes: e21aa34178 ("bpf: Fix fexit trampoline.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Link: https://lore.kernel.org/bpf/ZFvOOlrmHiY9AgXE@krava
Link: https://lore.kernel.org/bpf/20230515130849.57502-3-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04cb8453a9 ]
On aarch64, "bpftool feature" reports an incorrect BPF JIT limit:
$ sudo /sbin/bpftool feature
Scanning system configuration...
bpf() syscall restricted to privileged users
JIT compiler is enabled
JIT compiler hardening is disabled
JIT compiler kallsyms exports are enabled for root
skipping kernel config, can't open file: No such file or directory
Global memory limit for JIT compiler for unprivileged users is -201326592 bytes
This is because /proc/sys/net/core/bpf_jit_limit reports
$ sudo cat /proc/sys/net/core/bpf_jit_limit
68169519595520
...and an int is assumed in read_procfs(). Change read_procfs()
to return a long to avoid negative value reporting.
Fixes: 7a4522bbef ("tools: bpftool: add probes for /proc/ eBPF parameters")
Reported-by: Nicky Veitch <nicky.veitch@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230512113134.58996-1-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d9b41daa5 ]
If sock->service_name is NULL, the local variable
service_name_tlv_length will not be assigned by nfc_llcp_build_tlv(),
later leading to using value frmo the stack. Smatch warning:
net/nfc/llcp_commands.c:442 nfc_llcp_send_connect() error: uninitialized symbol 'service_name_tlv_length'.
Fixes: de9e5aeb4f ("NFC: llcp: Fix usage of llcp_add_tlv()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f34baf67e ]
n_bytes variable in the driver represents the number of bytes per word
that needs to be sent/copied to fifo. Bits/word can be between 8 and 32
bits from the client but in memory they are a power of 2, same is mentioned
in spi.h header:
"
* @bits_per_word: Data transfers involve one or more words; word sizes
* like eight or 12 bits are common. In-memory wordsizes are
* powers of two bytes (e.g. 20 bit samples use 32 bits).
* This may be changed by the device's driver, or left at the
* default (0) indicating protocol words are eight bit bytes.
* The spi_transfer.bits_per_word can override this for each transfer.
"
Hence, round of n_bytes to a power of 2 to avoid values like 3 which
would generate unalligned/odd accesses to memory/fifo.
* tested on Baikal-T1 based system with DW SPI-looped back interface
transferring a chunk of data with DFS:8,12,16.
Fixes: a51acc2400 ("spi: dw: Add support for 32-bits max xfer size")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com
Signed-off-by: Joy Chakraborty <joychakr@google.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com
Tested-by: Serge Semin <fancer.lancer@gmail.com
Link: https://lore.kernel.org/r/20230512104746.1797865-4-joychakr@google.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29ebbba7d4 ]
With the way the hooks implemented right now, we have a special
condition: optval larger than PAGE_SIZE will expose only first 4k into
BPF; any modifications to the optval are ignored. If the BPF program
doesn't handle this condition by resetting optlen to 0,
the userspace will get EFAULT.
The intention of the EFAULT was to make it apparent to the
developers that the program is doing something wrong.
However, this inadvertently might affect production workloads
with the BPF programs that are not too careful (i.e., returning EFAULT
for perfectly valid setsockopt/getsockopt calls).
Let's try to minimize the chance of BPF program screwing up userspace
by ignoring the output of those BPF programs (instead of returning
EFAULT to the userspace). pr_info_once those cases to
the dmesg to help with figuring out what's going wrong.
Fixes: 0d01da6afc ("bpf: implement getsockopt and setsockopt hooks")
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230511170456.1759459-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdeeed3498 ]
It seems like __builtin_offset() doesn't preserve CO-RE field
relocations properly. So if offsetof() macro is defined through
__builtin_offset(), CO-RE-enabled BPF code using container_of() will be
subtly and silently broken.
To avoid this problem, redefine offsetof() and container_of() in the
form that works with CO-RE relocations more reliably.
Fixes: 5fbc220862 ("tools/libpf: Add offsetof/container_of macro in bpf_helpers.h")
Reported-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230509065502.2306180-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
