commit 7d277a7a58 upstream.
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit
bc0c3405ab ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
Fixes: 760c295e0e ("be2net: Support for OS2BMC.")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20251119105015.194501-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a7bf4d5063 ]
The previous calculation used roundup() which caused an overflow for
rates between 25.5Gbps and 26Gbps.
For example, a rate of 25.6Gbps would result in using 100Mbps units with
value of 256, which would overflow the 8 bits field.
Simplify the upper_limit_mbps calculation by removing the
unnecessary roundup, and adjust the comparison to use <= to correctly
handle the boundary condition.
Fixes: d8880795da ("net/mlx5e: Implement DCBNL IEEE max rate")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762681073-1084058-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad17e7e92a ]
Two additional bytes in front of each frame received into the RX FIFO if
SHIFT16 is set, so we need to subtract the extra two bytes from pkt_len
to correct the statistic of rx_bytes.
Fixes: 3ac72b7b63 ("net: fec: align IP header in hardware")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251106021421.2096585-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deb8eb3916 ]
In bnxt_ptp_init(), when ptp_clock_register() fails, the driver is
not freeing the memory allocated for ptp_info->pin_config. Fix it
to unconditionally free ptp_info->pin_config in bnxt_ptp_free().
Fixes: caf3eedbcd ("bnxt_en: 1PPS support for 5750X family chips")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 740c342e39 ]
Making the ptp free and timecounter initialization code into separate
functions so that later patches can use them.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: deb8eb3916 ("bnxt_en: Fix a possible memory leak in bnxt_ptp_init")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e120f46768 ]
Raw IP packets have no MAC header, leaving skb->mac_header uninitialized.
This can trigger kernel panics on ARM64 when xfrm or other subsystems
access the offset due to strict alignment checks.
Initialize the MAC header to prevent such crashes.
This can trigger kernel panics on ARM when running IPsec over the
qmimux0 interface.
Example trace:
Internal error: Oops: 000000009600004f [#1] SMP
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1
Hardware name: LS1028A RDB Board (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : xfrm_input+0xde8/0x1318
lr : xfrm_input+0x61c/0x1318
sp : ffff800080003b20
Call trace:
xfrm_input+0xde8/0x1318
xfrm6_rcv+0x38/0x44
xfrm6_esp_rcv+0x48/0xa8
ip6_protocol_deliver_rcu+0x94/0x4b0
ip6_input_finish+0x44/0x70
ip6_input+0x44/0xc0
ipv6_rcv+0x6c/0x114
__netif_receive_skb_one_core+0x5c/0x8c
__netif_receive_skb+0x18/0x60
process_backlog+0x78/0x17c
__napi_poll+0x38/0x180
net_rx_action+0x168/0x2f0
Fixes: c6adf77953 ("net: usb: qmi_wwan: add qmap mux protocol support")
Signed-off-by: Qendrim Maxhuni <qendrim.maxhuni@garderos.com>
Link: https://patch.msgid.link/20251029075744.105113-1-qendrim.maxhuni@garderos.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0be04b5fa6 ]
The switch clears the ARL_SRCH_STDN bit when the search is done, i.e. it
finished traversing the ARL table.
This means that there will be no valid result, so we should not attempt
to read and process any further entries.
We only ever check the validity of the entries for 4 ARL bin chips, and
only after having passed the first entry to the b53_fdb_copy().
This means that we always pass an invalid entry at the end to the
b53_fdb_copy(). b53_fdb_copy() does check the validity though before
passing on the entry, so it never gets passed on.
On < 4 ARL bin chips, we will even continue reading invalid entries
until we reach the result limit.
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c264294624 ]
In the New Control register bit 1 is either reserved, or has a different
function:
Out of Range Error Discard
When enabled, the ingress port discards any frames
if the Length field is between 1500 and 1536
(excluding 1500 and 1536) and with good CRC.
The actual bit for enabling IP multicast is bit 0, which was only
explicitly enabled for BCM5325 so far.
For older switch chips, this bit defaults to 0, so we want to enable it
as well, while newer switch chips default to 1, and their documentation
says "It is illegal to set this bit to zero."
So drop the wrong B53_IPMC_FWD_EN define, enable the IP multicast bit
also for other switch chips. While at it, rename it to (B53_)IP_MC as
that is how it is called in Broadcom code.
Fixes: 63cc54a6f0 ("net: dsa: b53: Fix egress flooding settings")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6a8a5477f ]
There is no guarantee that the port state override registers have their
default values, as not all switches support being reset via register or
have a reset GPIO.
So when forcing port config, we need to make sure to clear all fields,
which we currently do not do for the speed and flow control
configuration. This can cause flow control stay enabled, or in the case
of speed becoming an illegal value, e.g. configured for 1G (0x2), then
setting 100M (0x1), results in 0x3 which is invalid.
For PORT_OVERRIDE_SPEED_2000M we need to make sure to only clear it on
supported chips, as the bit can have different meanings on other chips,
e.g. for BCM5389 this controls scanning PHYs for link/speed
configuration.
Fixes: 5e004460f8 ("net: dsa: b53: Add helper to set link parameters")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70a5ce8bc9 ]
bp->dev->dev_addr is of type `unsigned char *`. Casting it to a u32
pointer and dereferencing implies dealing manually with endianness,
which is error-prone.
Replace by calls to get_unaligned_le32|le16() helpers.
This was found using sparse:
⟩ make C=2 drivers/net/ethernet/cadence/macb_main.o
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] bottom
got restricted __le32 [usertype]
warning: incorrect type in assignment (different base types)
expected unsigned short [usertype] top
got restricted __le16 [usertype]
...
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-5-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf7154ffb1 ]
EEE speed down means speed down MAC MCU clock. It is not from spec.
It is kind of Realtek specific power saving feature. But enable it
may cause some issues, like packet drop or interrupt loss. Different
hardware may have different issues.
EEE speed down ratio (mac ocp 0xe056[7:4]) is used to set EEE speed
down rate. The larger this value is, the more power can save. But it
actually save less power then we expected. And, as mentioned above,
will impact compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0)
, which means not to speed down, to improve compatibility.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250918023425.3463-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99e9c5ffbb ]
Variable idx is set in the loop, but is never used resulting in dead
code. Building with GCC 16, which enables
-Werror=unused-but-set-parameter= by default results in build error.
This patch removes the idx parameter, since all the callers of the
fm10k_unbind_hw_stats_q as 0 as idx anyways.
Suggested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 487e8a8c34 ]
It appears that not all hardware/firmware implementations support
group key deletion correctly, which can lead to connection hangs
and deauthentication following GTK rekeying (delete and install).
To avoid this issue, instead of attempting to delete the key using
the special WMI_CIPHER_NONE value, we now replace the key with an
invalid (random) value.
This behavior has been observed with WCN39xx chipsets.
Tested-on: WCN3990 hw1.0 WLAN.HL.3.3.7.c2-00931-QCAHLSWMTPLZ-1
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Closes: https://lore.kernel.org/all/DAWJQ2NIKY28.1XOG35E4A682G@linaro.org
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # QRB2210 RB1
Link: https://patch.msgid.link/20250902143225.837487-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6287982aa5 ]
LAN969x switchdev support depends on the SparX-5 core,so make it selectable
for ARCH_LAN969X.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250917110106.55219-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43adad382e ]
When 8139too is probing and 8139TOO_PIO=y it will call pci_iomap_range()
and from there __pci_ioport_map() for the PCI IO space.
If HAS_IOPORT_MAP=n and NO_GENERIC_PCI_IOPORT_MAP=n, like it is on my
m68k config, __pci_ioport_map() becomes NULL, pci_iomap_range() will
always fail and the driver will complain it couldn't map the PIO space
and return an error.
NO_IOPORT_MAP seems to cover the case where what 8139too is trying
to do cannot ever work so make 8139TOO_PIO depend on being it false
and avoid creating an unusable driver.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://patch.msgid.link/20250907064349.3427600-1-daniel@thingy.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c02ea544a ]
The MAC can't facilitate WoL if the system can't go to sleep. Gate the
WoL support callbacks in ethtool at compile time using CONFIG_PM_SLEEP.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250909085849.3808169-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deb105f498 ]
The 88e1510 PHY has an erratum where the phy downshift counter is not
cleared after phy being suspended(BMCR_PDOWN set) and then later
resumed(BMCR_PDOWN cleared). This can cause the gigabit link to
intermittently downshift to a lower speed.
Disabling and re-enabling the downshift feature clears the counter,
allowing the PHY to retry gigabit link negotiation up to the programmed
retry count times before downshifting. This behavior has been observed
on copper links.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250906-marvell_fix-v2-1-f6efb286937f@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6896c2449a ]
stmmac_hw_setup() may return 0 on success and an appropriate negative
integer as defined in errno.h file on failure, just check it and then
return early if failed in stmmac_resume().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250811073506.27513-2-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2a27f6a8fb upstream
This issue was found by Runcheng Lu when develop HSCanT USB to CAN FD
converter[1]. The original developers may have only 3 interfaces
device to test so they write 3 here and wait for future change.
During the HSCanT development, we actually used 4 interfaces, so the
limitation of 3 is not enough now. But just increase one is not
future-proofed. Since the channel index type in gs_host_frame is u8,
just make canch[] become a flexible array with a u8 index, so it
naturally constraint by U8_MAX and avoid statically allocate 256
pointer for every gs_usb device.
[1]: https://github.com/cherry-embedded/HSCanT-hardware
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Reported-by: Runcheng Lu <runcheng.lu@hpmicro.com>
Cc: stable@vger.kernel.org
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Celeste Liu <uwu@coelacanthus.name>
Link: https://patch.msgid.link/20250930-gs-usb-max-if-v5-1-863330bf6666@coelacanthus.name
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5370c31e84 ]
Ensure the TX descriptor type fields are published in a safe order so the
DMA engine never begins processing a descriptor chain before all descriptor
fields are fully initialised.
For multi-descriptor transmits the driver writes DT_FEND into the last
descriptor and DT_FSTART into the first. The DMA engine begins processing
when it observes DT_FSTART. Move the dma_wmb() barrier so it executes
immediately after DT_FEND and immediately before writing DT_FSTART
(and before DT_FSINGLE in the single-descriptor case). This guarantees
that all prior CPU writes to the descriptor memory are visible to the
device before DT_FSTART is seen.
This avoids a situation where compiler/CPU reordering could publish
DT_FSTART ahead of DT_FEND or other descriptor fields, allowing the DMA to
start on a partially initialised chain and causing corrupted transmissions
or TX timeouts. Such a failure was observed on RZ/G2L with an RT kernel as
transmit queue timeouts and device resets.
Fixes: 2f45d1902a ("ravb: minimize TX data copying")
Cc: stable@vger.kernel.org
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251017151830.171062-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7e09a052dc ]
R-Car supports gPTP feature whereas RZ/G2L does not support it.
This patch excludes gtp feature support for RZ/G2L.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5370c31e84 ("net: ravb: Enforce descriptor type ordering")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 03ca7c8c42 ]
Currently, in hclge_mii_ioctl(), the operation to
read the PHY register (SIOCGMIIREG) always returns 0.
This patch changes the return type of hclge_read_phy_reg(),
returning an error code when the function fails.
Fixes: 024712f51e ("net: hns3: add ioctl support for imp-controlled PHYs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251023131338.2642520-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 420c84c330 ]
The root cause of this issue are:
1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0);
put the kevent work in global workqueue. However, the kevent has not yet
been scheduled when the usbnet device is unregistered. Therefore, executing
free_netdev() results in the "free active object (kevent)" error reported
here.
2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(),
if the usbnet device is up, ndo_stop() is executed to cancel the kevent.
However, because the device is not up, ndo_stop() is not executed.
The solution to this problem is to cancel the kevent before executing
free_netdev().
Fixes: a69e617e53 ("usbnet: Fix linkwatch use-after-free on disconnect")
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e9c1da4ee ]
ath10k_wmi_cmd_send takes ownership of the passed buffer (skb) and has the
responsibility to release it in case of error. This patch fixes missing
free in case of early error due to unhandled WMI command ID.
Tested-on: WCN3990 hw1.0 WLAN.HL.3.3.7.c2-00931-QCAHLSWMTPLZ-1
Fixes: 553215592f ("ath10k: warn if give WMI command is not supported")
Suggested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250926195656.187970-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3776c685eb upstream.
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[...]
[ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 1417.075653] Call trace:
[ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
[ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
[ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
[ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211]
[ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158
[ 1417.076302] genl_rcv_msg+0x220/0x2a0
[ 1417.076317] netlink_rcv_skb+0x68/0x140
[ 1417.076330] genl_rcv+0x40/0x60
[ 1417.076343] netlink_unicast+0x330/0x3b8
[ 1417.076357] netlink_sendmsg+0x19c/0x3f8
[ 1417.076370] __sock_sendmsg+0x64/0xc0
[ 1417.076391] ____sys_sendmsg+0x268/0x2a0
[ 1417.076408] ___sys_sendmsg+0xb8/0x118
[ 1417.076427] __sys_sendmsg+0x90/0xf8
[ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40
[ 1417.076465] invoke_syscall+0x50/0x120
[ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0
[ 1417.076506] do_el0_svc+0x24/0x38
[ 1417.076525] el0_svc+0x30/0x100
[ 1417.076548] el0t_64_sync_handler+0x100/0x130
[ 1417.076569] el0t_64_sync+0x190/0x198
[ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
Cc: stable@vger.kernel.org
Fixes: 18e2f61db3 ("brcmfmac: P2P action frame tx")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20251013102819.9727-1-gokulkumar.sivakumar@infineon.com
[Cc stable]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc89548c69 upstream.
The code did not check the return value of usbnet_get_endpoints.
Add checks and return the error if it fails to transfer the error.
Found via static anlaysis and this is similar to
commit 07161b2416 ("sr9800: Add check for usbnet_get_endpoints").
Fixes: 933a27d39e ("USB: asix - Add AX88178 support and many other changes")
Fixes: 2e55cc7210 ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://patch.msgid.link/20251026164318.57624-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 32be3ca4cf ]
Don't deinitialize and reinitialize the HAL helpers. The dma memory is
deallocated and there is high possibility that we'll not be able to get
the same memory allocated from dma when there is high memory pressure.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org
Cc: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://patch.msgid.link/20250722053121.1145001-1-usama.anjum@collabora.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 706136c572 upstream.
Add a final dma_wmb() barrier before triggering the transmit request
(TCCR_TSRQ) to ensure all descriptor and buffer writes are visible to
the DMA engine.
According to the hardware manual, a read-back operation is required
before writing to the doorbell register to guarantee completion of
previous writes. Instead of performing a dummy read, a dma_wmb() is
used to both enforce the same ordering semantics on the CPU side and
also to ensure completion of writes.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Cc: stable@vger.kernel.org
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251017151830.171062-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75cea9860a upstream.
TX frames aren't padded and unknown memory is sent into the ether.
Theoretically, it isn't even guaranteed that the extra memory exists
and can be sent out, which could cause further problems. In practice,
I found that plenty of tailroom exists in the skb itself (in my test
with ping at least) and skb_padto() easily succeeds, so use it here.
In the event of -ENOMEM drop the frame like other drivers do.
The use of one more padding byte instead of a USB zero-length packet
is retained to avoid regression. I have a dodgy Etron xHCI controller
which doesn't seem to support sending ZLPs at all.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251014203528.3f9783c4.michal.pecio@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10843e1492 upstream.
If the send_peer_notif counter and the peer event notify are not synchronized.
It may cause problems such as the loss or dup of peer notify event.
Before this patch:
- If should_notify_peers is true and the lock for send_peer_notif-- fails, peer
event may be sent again in next mii_monitor loop, because should_notify_peers
is still true.
- If should_notify_peers is true and the lock for send_peer_notif-- succeeded,
but the lock for peer event fails, the peer event will be lost.
This patch locks the RTNL for send_peer_notif, events, and commit simultaneously.
Fixes: 07a4ddec3c ("bonding: add an option to specify a delay between peer notifications")
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Vincent Bernat <vincent@bernat.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20251021050933.46412-1-tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 902e81e679 ]
The blamed commit increased the needed headroom to account for
alignment. This means that the size required to always align a Tx buffer
was added inside the dpaa2_eth_needed_headroom() function. By doing
that, a manual adjustment of the pointer passed to PTR_ALIGN() was no
longer correct since the 'buffer_start' variable was already pointing
to the start of the skb's memory.
The behavior of the dpaa2-eth driver without this patch was to drop
frames on Tx even when the headroom was matching the 128 bytes
necessary. Fix this by removing the manual adjust of 'buffer_start' from
the PTR_MODE call.
Closes: https://lore.kernel.org/netdev/70f0dcd9-1906-4d13-82df-7bbbbe7194c6@app.fastmail.com/T/#u
Fixes: f422abe3f2 ("dpaa2-eth: increase the needed headroom to account for alignment")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016135807.360978-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e59bc32df2 ]
The ENETC RX ring uses the page halves flipping mechanism, each page is
split into two halves for the RX ring to use. And ENETC_RXB_TRUESIZE is
defined to 2048 to indicate the size of half a page. However, the page
size is configurable, for ARM64 platform, PAGE_SIZE is default to 4K,
but it could be configured to 16K or 64K.
When PAGE_SIZE is set to 16K or 64K, ENETC_RXB_TRUESIZE is not correct,
and the RX ring will always use the first half of the page. This is not
consistent with the description in the relevant kernel doc and commit
messages.
This issue is invisible in most cases, but if users want to increase
PAGE_SIZE to receive a Jumbo frame with a single buffer for some use
cases, it will not work as expected, because the buffer size of each
RX BD is fixed to 2048 bytes.
Based on the above two points, we expect to correct ENETC_RXB_TRUESIZE
to (PAGE_SIZE >> 1), as described in the comment.
Fixes: d4fd0404c1 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251016080131.3127122-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d93ff40d4 ]
dev->chipid is used in lan78xx_init_mac_address before it's initialized:
lan78xx_reset() {
lan78xx_init_mac_address()
lan78xx_read_eeprom()
lan78xx_read_raw_eeprom() <- dev->chipid is used here
dev->chipid = ... <- dev->chipid is initialized correctly here
}
Reorder initialization so that dev->chipid is set before calling
lan78xx_init_mac_address().
Fixes: a0db7d10b7 ("lan78xx: Add to handle mux control per chip id")
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Khalid Aziz <khalid@kernel.org>
Link: https://patch.msgid.link/20251013181648.35153-1-viswanathiyyappan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f31135894 ]
Convert `lan78xx_init_mac_address` to return error codes and handle
failures in register read and write operations. Update `lan78xx_reset`
to check for errors during MAC address initialization and propagate them
appropriately.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241209130751.703182-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8d93ff40d4 ("net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af804e6db9 ]
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Convert net/usb from ether_addr_copy() to eth_hw_addr_set():
@@
expression dev, np;
@@
- ether_addr_copy(dev->dev_addr, np)
+ eth_hw_addr_set(dev, np)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 8d93ff40d4 ("net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c3f2e6281 ]
Some execution paths that jump to the fiber_setup_done label
could leave the remote_adv and local_adv variables uninitialized
and then use it.
Initialize this variables at the point of definition to avoid this.
Fixes: 85730a631f ("tg3: Add SGMII phy support for 5719/5718 serdes")
Co-developed-by: Alexandr Sapozhnikov <alsp705@gmail.com>
Signed-off-by: Alexandr Sapozhnikov <alsp705@gmail.com>
Signed-off-by: Alexey Simakov <bigalex934@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20251014164736.5890-1-bigalex934@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2616222e42 ]
During interface toggle operations (ifdown/ifup), the driver currently
resets the local helper variable 'phy_link' to -1. This causes the link
state machine to incorrectly interpret the state as a link change event,
resulting in spurious "Link is down" messages being logged when the
interface is brought back up.
Preserve the phy_link state across interface toggles to avoid treating
the -1 sentinel value as a legitimate link state transition.
Fixes: 88131a812b ("amd-xgbe: Perform phy connect/disconnect at dev open/stop")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Link: https://patch.msgid.link/20251010065142.1189310-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70f92ab970 ]
After resume from S4 (hibernate), RTL8168H/RTL8111H truncates incoming
packets. Packet captures show messages like "IP truncated-ip - 146 bytes
missing!".
The issue is caused by RxConfig not being properly re-initialized after
resume. Re-initializing the RxConfig register before the chip
re-initialization sequence avoids the truncation and restores correct
packet reception.
This follows the same pattern as commit ef9da46dde ("r8169: fix data
corruption issue on RTL8402").
Fixes: 6e1d0b8988 ("r8169:add support for RTL8168H and RTL8107E")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20251009122549.3955845-1-lilinmao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65946eac6d ]
There is no error handling for `dma_map_single()` failures.
Add error handling by checking `dma_mapping_error()` and freeing
the `skb` using `dev_kfree_skb()` (process context) when it fails.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Tested-on: D-Link DGE-550T Rev-A3
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba569fb07a ]
Commit 227619c3ff ("can: m_can: move runtime PM enable/disable to
m_can_platform") moved the PM runtime enable from the m_can core
driver into the m_can_platform.
That patch forgot to move the pm_runtime_disable() to
m_can_plat_remove(), so that unloading the m_can_platform driver
causes an "Unbalanced pm_runtime_enable!" error message.
Add the missing pm_runtime_disable() to m_can_plat_remove() to fix the
problem.
Cc: Patrik Flykt <patrik.flykt@linux.intel.com>
Fixes: 227619c3ff ("can: m_can: move runtime PM enable/disable to m_can_platform")
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20250929-m_can-fix-state-handling-v4-1-682b49b49d9a@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 75527d61d6 upstream.
rtl8152_driver_init() is missing the error handling.
When rtl8152_driver registration fails, rtl8152_cfgselector_driver
should be deregistered.
Fixes: ec51fbd1b8 ("r8152: add USB device driver for config selection")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251011082415.580740-1-yicongsrfy@163.com
[pabeni@redhat.com: clarified the commit message]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a251f52cf ]
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4477b39c32 ]
Commit 3a7e02c040 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3d3c4cd5c6 ]
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before.
Fixes: 4a2c7217cd ("net: usb: asix: ax88772: manage PHY PM from MAC")
Reported-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Closes: https://lore.kernel.org/all/DCGHG5UJT9G3.2K1GHFZ3H87T0@gmail.com
Tested-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/b5ea8296-f981-445d-a09a-2f389d7f6fdd@samsung.com
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251005081203.3067982-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ adapted to phylib-only ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4f0d91ba72 ]
Print "entry->mac" before freeing "entry". The "entry" pointer is
freed with kfree_rcu() so it's unlikely that we would trigger this
in real life, but it's safer to re-order it.
Fixes: cc5387f734 ("net/mlx4_en: Add unicast MAC filtering")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/aNvMHX4g8RksFFvV@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
