Commit graph

1,283,935 commits

Author SHA1 Message Date
Imre Deak
c3c90de3a7 drm/i915/dp: Add debugfs entries to force the link rate/lane count
Add connector debugfs entries to force the link rate/lane count to be
used by a link training afterwards. These settings will be clamped to
the supported, i.e. the source's and sink's common rate/lane count.

After forcing the link rate/lane count reset the link training
parameters and for a non-auto setting disable reducing the link
parameters via the fallback logic. The former one can be used after
testing link training failure scenarios - via debugfs entries added
later - to reset the reduced link parameters after the test.

v2:
- Add the entries from intel_dp_link_training.c (Jani)
- Rename the entries to i915_dp_set_link_rate/lane_count.
v3: (Ville)
- Rename the entries/struct fields to force_link_rate/lane_count.
- Lock connection_mutex only for the required intel_dp state.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-18-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
73afc1e2fd drm/i915/dp_mst: Enable link training fallback for MST
Reduce the link parameters after a link training failure for MST
outputs, similarly to how this is done for SST.

For now allow the reduction only by staying in the 8b/10b vs. 128b/132b
mode. Enabling the mode switch is left for a follow-up patchset, after
taking measures ensuring that the mode switch happens properly. In
particular a rediscovery of the whole MST topology may be required for
such a switch, see the References below.

Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10970
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-17-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
e3e70d0840 drm/i915/dp_mst: Reset intel_dp->link_trained during disabling
Reset the flag indicating an active link after disabling an MST link,
similarly to how this is done for SST outputs. This avoids trying to
retrain an MST link while its disabled.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-16-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
81c9642b2a drm/i915/dp: Disable link retraining after the last fallback step
After a link training failure if the link parameters can't be further
reduced, there is no point in trying to retrain the link in the driver.
This avoids excessive retrain attempts after detecting a bad link, for
instance while handling MST HPD IRQs, which is likely redundant as the
link training failed already twice with the same minimum link
parameters. Userspace can still try to retrain the link with these
parameters via a modeset.

While at it make the error message more accurate.

v2: Move converting the error to a debug message to the relevant
    follow-up patch. (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-15-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
34aca703d4 drm/i915/dp: Use check link state work in the HPD IRQ handler
Simplify things by retraining a DP link if a bad link is detected in the
HPD IRQ handler from the encoder's check link state work, similarly to
how this is done after a modeset link training failure.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-14-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
ff68f68c0e drm/i915/dp: Use check link state work in the detect handler
Simplify things by retraining a DP link if a bad link is detected in the
connector detect handler from the encoder's check link state work,
similarly to how this is done after a modeset link training failure.

v2: Add TODO: comment to remove the detect-time link state check.
    (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-13-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
b22b4dd96e drm/i915/dp: Use check link state work in the hotplug handler
Simplify things by retraining a DP link if a bad link is detected in the
hotplug handler from the encoder's check link state work, similarly to
how this is done after a modeset link training failure.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-12-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
c9a5f6019c drm/i915/dp: Send a link training modeset-retry uevent to all MST connectors
Send a modeset-retry uevent to all connectors in the same MST topology
after a link training failure and reduction of the link parameters. This
matches the way the same uevent is sent after a DP tunnel BW allocation
failure.

v2: Add NOTE that the atomic state may not be valid for SST links and
    assert that it's valid for MST links. (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-11-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
182c6be08b drm/i915/dp: Pass atomic state to link training function
The next patch adds sending a modeset-retry uevent after a link training
failure to all MST connectors on link. This requires the atomic state,
so pass it to intel_dp_start_link_train(). In case of SST where
retraining still happens by calling this function directly instead of a
modeset commit the atomic state is not available and NULL is passed
instead. This is ok, since in this case the encoder's only DP connector
is available from intel_dp->attached_connector not requiring the atomic
state.

v2: Add NOTE that the atomic state may not be valid for SST links and
    assert that it's valid for MST links. (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-10-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
5bd3e7ea88 drm/i915/dp: Reduce link params only after retrying with unchanged params
Try to maintain the current link parameters by retrying the link
training with unchanged link parameters before reducing these parameters
(sending an uevent to userspace to retrain the link instead).

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-9-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
3b3be899fc drm/i915/dp: Recheck link state after modeset
Recheck the link state after a passing link training, with a 2 sec delay
to account for cases where the link goes bad following the link training
and the sink doesn't report this via an HPD IRQ.

The delayed work added here will be also used by a later patch after a
failed link training to try to retrain the link with unchanged link
params before reducing the link params.

v2: Don't flush an uninitialized delayed work (on HDMI-only DDI ports).
v3:
- Move the helpers to a new intel_encoder.c file, rename them
  accordingly. (Ville)
- Add the work to intel_encoder instead of intel_digital_port.
- Call the encoder specific link check function via an encoder hook.
- Flush the link check work during encoder destroy from
  intel_dp_encoder_flush_work().
- Flush the link check work during encoder suspend as well.
v4: Call intel_encoder_link_check_init() with a valid encoder pointer.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610181428.2955658-1-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
4ce7cff538 drm/i915/dp: Use a commit modeset for link retraining MST links
Instead of direct calls to the link train functions, retrain the link
via a commit modeset. The direct call means that the output port will be
disabled/re-enabled while the rest of the pipeline (transcoder) is
active, which doesn't seem to work on MST at least. It leads to
underruns and black screen, presumedly because the transcoder is not
disabled/re-enabled along the port.

Leave switching to a commit modeset on SST for a later patchset, as that
seems to work ok currently (though better to using a commit there too,
due to the suppressed underruns).

v2: Keep reverse line length order for local variables. (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-7-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
e5bf189a0f drm/i915: Factor out function to modeset commit a set of pipes
Factor out a function to modeset commit a set of pipes, which a later
patch will reuse for DP link retraining.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-6-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
9eb4aab86a drm/i915/dp: Sanitize intel_dp_get_link_train_fallback_values()
Reduce the indentation in intel_dp_get_link_train_fallback_values() by
adding separate helpers to reduce the link rate and lane count. Also
simplify things by passing crtc_state to the function.

This also prepares for later patches in the patchset adding a limitation
on how the link params are reduced.

While at it use lt_dbg()/lt_err() for debug/error prints in the function
which will also print the connector/encoder prefix and add a debug print
about reducing the link parameters.

v2:
- Align reduce_lane_count()'s error handling flow with
  reduce_link_rate(). (Ville, Jani)
- Use lt_dbg()/lt_err() in the function.

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-5-imre.deak@intel.com
2024-06-13 21:26:49 +03:00
Imre Deak
dd1eae474e drm/i915/dp: Move link train fallback to intel_dp_link_training.c
Move the functions used to reduce the link parameters during link
training to intel_dp_link_training.c .

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-4-imre.deak@intel.com
2024-06-13 21:26:29 +03:00
Maciej Żenczykowski
b99a95bc56 bpf: fix UML x86_64 compile failure
pcpu_hot (defined in arch/x86) is not available on user mode linux (ARCH=um)

Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Fixes: 1ae6921009 ("bpf: inline bpf_get_smp_processor_id() helper")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20240613173146.2524647-1-maze@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-13 11:24:45 -07:00
Imre Deak
6a03100200 drm/i915/dp: Move link train params to a substruct in intel_dp
For clarity move the link training parameters updated during link
training based on the pass/fail LT result under a substruct in intel_dp.
This prepares for later patches in this patchset adding similar params
here. Rename intel_dp_reset_max_link_params() to
intel_dp_reset_link_params() to better reflect what state gets reset.

v2: Add the parameters to a more generic link substruct. (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-3-imre.deak@intel.com
2024-06-13 21:17:33 +03:00
Imre Deak
1bcbe192e0 drm/i915/dp_mst: Align TUs to avoid splitting symbols across MTPs
Symbols consisting of multiple (4) TU timeslots may get split across
MTPs when using 2 or 1 link lanes. Avoid this, as required by Bspec by
aligning the allocated TUs to 2 when using 2 lanes and 4 when using 1
lane.

Atm, we also have to align the PBNs used to allocate BW along the MST
path, since DRM core keeps track of its own TU value, derived from the
PBN and that TU value must match what the driver calculates.

On some platforms the alignment is only required on 8b/10b links, a
follow-up patch will remove the limitation for those.

Bspec: 49266, 68922

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-2-imre.deak@intel.com
2024-06-13 21:17:22 +03:00
Daniel Borkmann
ceb65eb600 selftests/bpf: Add test coverage for reg_set_min_max handling
Add a test case for the jmp32/k fix to ensure selftests have coverage.

Before fix:

  # ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k
  [...]
  ./test_progs -t verifier_or_jmp32_k
  tester_init:PASS:tester_log_buf 0 nsec
  process_subtest:PASS:obj_open_mem 0 nsec
  process_subtest:PASS:specs_alloc 0 nsec
  run_subtest:PASS:obj_open_mem 0 nsec
  run_subtest:FAIL:unexpected_load_success unexpected success: 0
  #492/1   verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:FAIL
  #492     verifier_or_jmp32_k:FAIL
  Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED

After fix:

  # ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k
  [...]
  ./test_progs -t verifier_or_jmp32_k
  #492/1   verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:OK
  #492     verifier_or_jmp32_k:OK
  Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240613115310.25383-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-13 11:16:01 -07:00
Daniel Borkmann
e73cd1cfc2 bpf: Reduce stack consumption in check_stack_write_fixed_off
The fake_reg moved into env->fake_reg given it consumes a lot of stack
space (120 bytes). Migrate the fake_reg in check_stack_write_fixed_off()
as well now that we have it.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240613115310.25383-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-13 11:16:01 -07:00
Daniel Borkmann
9242480126 bpf: Fix reg_set_min_max corruption of fake_reg
Juan reported that after doing some changes to buzzer [0] and implementing
a new fuzzing strategy guided by coverage, they noticed the following in
one of the probes:

  [...]
  13: (79) r6 = *(u64 *)(r0 +0)         ; R0=map_value(ks=4,vs=8) R6_w=scalar()
  14: (b7) r0 = 0                       ; R0_w=0
  15: (b4) w0 = -1                      ; R0_w=0xffffffff
  16: (74) w0 >>= 1                     ; R0_w=0x7fffffff
  17: (5c) w6 &= w0                     ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff))
  18: (44) w6 |= 2                      ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd))
  19: (56) if w6 != 0x7ffffffd goto pc+1
  REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
  REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
  REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0)
  19: R6_w=0x7fffffff
  20: (95) exit

  from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  21: (14) w6 -= 2147483632             ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd))
  22: (76) if w6 s>= 0xe goto pc+1      ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd))
  23: (95) exit

  from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  24: (14) w6 -= 14                     ; R6_w=0
  [...]

What can be seen here is a register invariant violation on line 19. After
the binary-or in line 18, the verifier knows that bit 2 is set but knows
nothing about the rest of the content which was loaded from a map value,
meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in
line 19 the verifier analyzes the branch, it splits the register states
in reg_set_min_max() into the registers of the true branch (true_reg1,
true_reg2) and the registers of the false branch (false_reg1, false_reg2).

Since the test is w6 != 0x7ffffffd, the src_reg is a known constant.
Internally, the verifier creates a "fake" register initialized as scalar
to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now,
for line 19, it is mathematically impossible to take the false branch of
this program, yet the verifier analyzes it. It is impossible because the
second bit of r6 will be set due to the prior or operation and the
constant in the condition has that bit unset (hex(fd) == binary(1111 1101).

When the verifier first analyzes the false / fall-through branch, it will
compute an intersection between the var_off of r6 and of the constant. This
is because the verifier creates a "fake" register initialized to the value
of the constant. The intersection result later refines both registers in
regs_refine_cond_op():

  [...]
  t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off));
  reg1->var_off = tnum_with_subreg(reg1->var_off, t);
  reg2->var_off = tnum_with_subreg(reg2->var_off, t);
  [...]

Since the verifier is analyzing the false branch of the conditional jump,
reg1 is equal to false_reg1 and reg2 is equal to false_reg2, i.e. the reg2
is the "fake" register that was meant to hold a constant value. The resulting
var_off of the intersection says that both registers now hold a known value
of var_off=(0x7fffffff, 0x0) or in other words: this operation manages to
make the verifier think that the "constant" value that was passed in the
jump operation now holds a different value.

Normally this would not be an issue since it should not influence the true
branch, however, false_reg2 and true_reg2 are pointers to the same "fake"
register. Meaning, the false branch can influence the results of the true
branch. In line 24, the verifier assumes R6_w=0, but the actual runtime
value in this case is 1. The fix is simply not passing in the same "fake"
register location as inputs to reg_set_min_max(), but instead making a
copy. Moving the fake_reg into the env also reduces stack consumption by
120 bytes. With this, the verifier successfully rejects invalid accesses
from the test program.

  [0] https://github.com/google/buzzer

Fixes: 67420501e8 ("bpf: generalize reg_set_min_max() to handle non-const register comparisons")
Reported-by: Juan José López Jaimez <jjlopezjaimez@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240613115310.25383-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-13 11:16:01 -07:00
Linus Torvalds
d20f6b3d74 Including fixes from bluetooth and netfilter.
Current release - regressions:
 
  - Revert "igc: fix a log entry using uninitialized netdev",
    it traded lack of netdev name in a printk() for a crash
 
 Previous releases - regressions:
 
  - Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
 
  - geneve: fix incorrectly setting lengths of inner headers in the skb,
    confusing the drivers and causing mangled packets
 
  - sched: initialize noop_qdisc owner to avoid false-positive recursion
    detection (recursing on CPU 0), which bubbles up to user space as
    a sendmsg() error, while noop_qdisc should silently drop
 
  - netdevsim: fix backwards compatibility in nsim_get_iflink()
 
 Previous releases - always broken:
 
  - netfilter: ipset: fix race between namespace cleanup and gc
    in the list:set type
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmZrFjoACgkQMUZtbf5S
 Iru6Bw/+MfomIf6qvdCXKdka4eOeqZLg7gZU0UdC99VM1SH7QGazkAvj4ACbDMa7
 04mgNZKquV5Fx6AJQwjAodzHx2KUl5WA5cWzAuLyA78lJXoipI7W+KRtcBzGl0gs
 IQ+IQCofWjduLMc9y67TqTSnVhtDWaHWw6PwMW8Z4BotD9hXxoUeGXz373UA8xhW
 2Wz1HkQbDqIFqc0Sp1c0IfAQtnzzvg4yC+KCV+2nHB/d8CAlCUJ6deVWbCtF8d5O
 /ospqFykzkENbYh8ySMEs6bAH0mS2nMiLPRnoLW1b2vMQWgOwv8xYVaYHI5tP+7u
 NxMZd4JQntBLhe8jV3sc6ciPnlPSDu6rNDwWJcvK26EHPXYg/opsihH18nMu1esO
 fp//KvKz8BT4vrkAW+YpxaD86V1X0dKkPIr2qFQ3eMHF8A1p+lYcGiWd1BQNPj5A
 HHX1ERTVHxyl1nH2wy0FHhPXt1k5SzUT9AS0PyBou14stwN1O8VHHmGrTbu+CHe5
 /P1jJ9DNDGO6LdDr60W9r+ucyvGYGxoZe09NQOiBXYnJbb1Xq5Allh+d6O+oyT0y
 kM1jsPt2360nF2TZ8lMpn+R+OfTdOaQMw5nHXd+XFX0VktQ/231vW9L/dRfcOt6C
 ESuaDHz0Q1DE8PI/dfrxRQLDG7UckN27aTHdn+ZHkq4VjdUPUdk=
 =cyRR
 -----END PGP SIGNATURE-----

Merge tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth and netfilter.

  Slim pickings this time, probably a combination of summer, DevConf.cz,
  and the end of first half of the year at corporations.

  Current release - regressions:

   - Revert "igc: fix a log entry using uninitialized netdev", it traded
     lack of netdev name in a printk() for a crash

  Previous releases - regressions:

   - Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ

   - geneve: fix incorrectly setting lengths of inner headers in the
     skb, confusing the drivers and causing mangled packets

   - sched: initialize noop_qdisc owner to avoid false-positive
     recursion detection (recursing on CPU 0), which bubbles up to user
     space as a sendmsg() error, while noop_qdisc should silently drop

   - netdevsim: fix backwards compatibility in nsim_get_iflink()

  Previous releases - always broken:

   - netfilter: ipset: fix race between namespace cleanup and gc in the
     list:set type"

* tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
  bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
  af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
  bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
  gve: Clear napi->skb before dev_kfree_skb_any()
  ionic: fix use after netif_napi_del()
  Revert "igc: fix a log entry using uninitialized netdev"
  net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
  net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
  net/ipv6: Fix the RT cache flush via sysctl using a previous delay
  net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters
  gve: ignore nonrelevant GSO type bits when processing TSO headers
  net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP
  netfilter: Use flowlabel flow key when re-routing mangled packets
  netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
  netfilter: nft_inner: validate mandatory meta and payload
  tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
  mailmap: map Geliang's new email address
  mptcp: pm: update add_addr counters after connect
  mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID
  mptcp: ensure snd_una is properly initialized on connect
  ...
2024-06-13 11:11:53 -07:00
Linus Torvalds
fd88e181d8 NFS client bugfixes for Linux 6.10
Bugfixes:
  - NFSv4.2: Fix a memory leak in nfs4_set_security_label
  - NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long.
  - NFS: Add appropriate memory barriers to the sillyrename code
  - Propagate readlink errors in nfs_symlink_filler
  - NFS: don't invalidate dentries on transient errors
  - NFS: fix unnecessary synchronous writes in random write workloads
  - NFSv4.1: enforce rootpath check when deciding whether or not to trunk
 
 Other:
  - Change email address for Trond Myklebust due to email server concerns
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESQctxSBg8JpV8KqEZwvnipYKAPIFAmZrD7kACgkQZwvnipYK
 APJo/RAAlg5uU8kTzXCbUbe9LImF5nh+9XFtg6nnQ+rxQqCU17noT0bazghvBcDP
 N6v4evWJVeZhnqspVZkdMQWeyNEqsew5uPRoC+gy0sh4RdwT+BHsMwLMWtNTzXoc
 GW7DOJ7LePzxmh0bksIFn6vmsuhxyI7hKkDx8XuG0YjmHQDcl2TeyHLfii7TFIMP
 hFEVw63ZFb+HKV0oInyP27iiM1HstvZ8MbxLcu1PoA3IaiNUYXUgBViWF2c5P6uY
 KV7KynUMgkWQc289aaR7QE5Yz2f4vsYF4oD72+Z3v65W+5HunYut/HUnUGgjHPGq
 dI5EwSgxW5YKoo/kIvto3yF+ppkppl2gUYFlN3+O/IEXwh+FTXBF2b/tUWFkKQPH
 7X3YoosWV/WN1eWqa55znF5IzrG5gdR5z6Et1elTmn4xG4hwoC5U5lOP34DohS4Q
 N/MMxzVcL348j2teN+dFNXM3WkEVaMJudavJ7A7KehZKSTZAuFNHDxsMjvyGBbGI
 Za1DanWSCWBD8Bawt9hB8z+k4eN7dGfeWUgMHa2zxOowfeq0MYTjAlr1A8SuXADv
 E+1tjL7CL7HeHReOg0cbP11BxLOlXYiObsbivFcbYGglbWwtPqR4q4+CIA6AuhCF
 LSpxF/6uKCXUHCuuGdAgZ5nNApHvC+HoUN0gCBcpIALcazLq0TQ=
 =DeAG
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client fixes from Trond Myklebust:
 "Bugfixes:
   - NFSv4.2: Fix a memory leak in nfs4_set_security_label
   - NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long.
   - NFS: Add appropriate memory barriers to the sillyrename code
   - Propagate readlink errors in nfs_symlink_filler
   - NFS: don't invalidate dentries on transient errors
   - NFS: fix unnecessary synchronous writes in random write workloads
   - NFSv4.1: enforce rootpath check when deciding whether or not to trunk

  Other:
   - Change email address for Trond Myklebust due to email server concerns"

* tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: add barriers when testing for NFS_FSDATA_BLOCKED
  SUNRPC: return proper error from gss_wrap_req_priv
  NFSv4.1 enforce rootpath check in fs_location query
  NFS: abort nfs_atomic_open_v23 if name is too long.
  nfs: don't invalidate dentries on transient errors
  nfs: Avoid flushing many pages with NFS_FILE_SYNC
  nfs: propagate readlink errors in nfs_symlink_filler
  MAINTAINERS: Change email address for Trond Myklebust
  NFSv4: Fix memory leak in nfs4_set_security_label
2024-06-13 11:07:32 -07:00
Linus Torvalds
3572597ca8 memblock: fix validation of NUMA coverage
To check for unset node ID for a range memblock_validate_numa_coverage()
 was checking for NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID
 was specified by buggy firmware.
 
 Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in
 memblock_set_node() and use NUMA_NO_NODE in x86::numa_init().
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmZq/CsQHHJwcHRAa2Vy
 bmVsLm9yZwAKCRA5A4Ymyw79kcpQB/4kmPgJJ0ApdwLT1JiPgLabAPOa05GvCcfa
 /1JsoAIX5NlBThy2mX0QJ3963MFkB1wc8KqJuG8OpsL9/AHpdgts+4Me/K2PORWH
 cZbgU01S4eqlBIY08mODnSYIpQI+n88kzYob+jRGud/NSwk7wu/+//n6lACqsltE
 K+E/9zSfmnnr8gxv6rsi7YTQrXWAsGIhLJDLamYM9Q3Pz0azvdzrfLRlVV4NaaUw
 Dvj6wG60A9qAmXP46OTU3DvlVGA5qv4rahLA8JuHC3TIV12/JchENL2yOAj5SMiv
 0k/q+89HAcvFm9ByV+auEd1IKjgvNPQYsWaYnB88HZ10oMNkuDD0
 =Y/Dv
 -----END PGP SIGNATURE-----

Merge tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock

Pull memblock fixes from Mike Rapoport:
 "Fix validation of NUMA coverage.

  memblock_validate_numa_coverage() was checking for a unset node ID
  using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was
  specified by buggy firmware.

  Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in
  memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()"

* tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node()
  memblock: make memblock_set_node() also warn about use of MAX_NUMNODES
2024-06-13 10:09:29 -07:00
Jayesh Choudhary
9324410846
drm/bridge: sii902x: Add pixel clock check in atomic_check
Check the pixel clock for the mode in atomic_check and ensure that
it is within the range supported by the bridge.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613083805.439337-4-j-choudhary@ti.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-06-13 17:36:44 +02:00
Jayesh Choudhary
96fddae126
drm/bridge: sii902x: Support atomic bridge APIs
Change exisitig enable() and disable() bridge hooks to their atomic
counterparts as the former hooks are deprecated.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613083805.439337-3-j-choudhary@ti.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-06-13 17:36:44 +02:00
Jayesh Choudhary
520dbf5423
drm/bridge: sii902x: Fix mode_valid hook
Currently, mode_valid is defined only in drm_connector_helper_funcs.
When the bridge is attached with the 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
flag, the connector is not initialized, and so is the mode_valid
hook under connector helper funcs.
It also returns MODE_OK for all modes without actually checking the
modes.
So move the mode_valid hook to drm_bridge_funcs with proper clock
checks for maximum and minimum pixel clock supported by the bridge.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613083805.439337-2-j-choudhary@ti.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-06-13 17:36:43 +02:00
Wojciech Drewek
a27f6ac9d4 ice: implement AQ download pkg retry
ice_aqc_opc_download_pkg (0x0C40) AQ sporadically returns error due
to FW issue. Fix this by retrying five times before moving to
Safe Mode. Sleep for 20 ms before retrying. This was tested with the
4.40 firmware.

Fixes: c764881096 ("ice: Implement Dynamic Device Personalization (DDP) download")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-13 08:24:17 -07:00
Paul Greenwalt
aeccadb24d ice: fix 200G link speed message log
Commit 24407a01e5 ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include 200G link speed message
support. As a result the driver incorrectly reports Unknown for 200G
link speed.

Fix this by adding 200G support to ice_print_link_msg().

Fixes: 24407a01e5 ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-13 08:24:17 -07:00
En-Wei Wu
bc69ad7486 ice: avoid IRQ collision to fix init failure on ACPI S3 resume
A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes
that irdma would break and report hardware initialization failed after
suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5).

The problem is caused due to the collision between the irq numbers
requested in irdma and the irq numbers requested in other drivers
after suspend/resume.

The irq numbers used by irdma are derived from ice's ice_pf->msix_entries
which stores mappings between MSI-X index and Linux interrupt number.
It's supposed to be cleaned up when suspend and rebuilt in resume but
it's not, causing irdma using the old irq numbers stored in the old
ice_pf->msix_entries to request_irq() when resume. And eventually
collide with other drivers.

This patch fixes this problem. On suspend, we call ice_deinit_rdma() to
clean up the ice_pf->msix_entries (and free the MSI-X vectors used by
irdma if we've dynamically allocated them). On resume, we call
ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the
MSI-X vectors if we would like to dynamically allocate them).

Fixes: f9f5301e7e ("ice: Register auxiliary device to provide RDMA")
Tested-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-13 08:24:17 -07:00
Aleksandr Mishin
a9b9741854 bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
In case of token is released due to token->state == BNXT_HWRM_DEFERRED,
released token (set to NULL) is used in log messages. This issue is
expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But
this error code is returned by recent firmware. So some firmware may not
return it. This may lead to NULL pointer dereference.
Adjust this issue by adding token pointer check.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 8fa4219dba ("bnxt_en: add dynamic debug support for HWRM messages")
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240611082547.12178-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13 08:05:46 -07:00
Rao Shoaib
a6736a0add af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
Read with MSG_PEEK flag loops if the first byte to read is an OOB byte.
commit 22dd70eb2c ("af_unix: Don't peek OOB data without MSG_OOB.")
addresses the loop issue but does not address the issue that no data
beyond OOB byte can be read.

>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'a', MSG_OOB)
1
>>> c1.send(b'b')
1
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
b'b'

>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c2.setsockopt(SOL_SOCKET, SO_OOBINLINE, 1)
>>> c1.send(b'a', MSG_OOB)
1
>>> c1.send(b'b')
1
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
b'a'
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
b'a'
>>> c2.recv(1, MSG_DONTWAIT)
b'a'
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
b'b'
>>>

Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Rao Shoaib <Rao.Shoaib@oracle.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240611084639.2248934-1-Rao.Shoaib@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13 08:03:55 -07:00
Michael Chan
7d9df38c9c bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
Firmware interface 1.10.2.118 has increased the size of
HWRM_PORT_PHY_QCFG response beyond the maximum size that can be
forwarded.  When the VF's link state is not the default auto state,
the PF will need to forward the response back to the VF to indicate
the forced state.  This regression may cause the VF to fail to
initialize.

Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum
96 bytes.  The SPEEDS2_SUPPORTED flag needs to be cleared because the
new speeds2 fields are beyond the legacy structure.  Also modify
bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96
bytes to make this failure more obvious.

Fixes: 84a911db83 ("bnxt_en: Update firmware interface to 1.10.2.118")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13 07:50:16 -07:00
Greg Kroah-Hartman
7da9dfdd5a .editorconfig: remove trim_trailing_whitespace option
Some editors (like the vim variants), when seeing "trim_whitespace"
decide to do just that for all of the whitespace in the file you are
saving, even if it is not on a line that you have modified.  This plays
havoc with diffs and is NOT something that should be intended.

As the "only trim whitespace on modified lines" is not part of the
editorconfig standard yet, just delete these lines from the
.editorconfig file so that we don't end up with diffs that are
automatically rejected by maintainers for containing things they
shouldn't.

Cc: Danny Lin <danny@kdrag0n.dev>
Cc: Íñigo Huguet <ihuguet@redhat.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Fixes: 5a602de997 ("Add .editorconfig file for basic formatting")
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/2024061137-jawless-dipped-e789@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-13 16:47:52 +02:00
Ziwei Xiao
6f4d93b78a gve: Clear napi->skb before dev_kfree_skb_any()
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it
is freed with dev_kfree_skb_any(). This can result in a subsequent call
to napi_get_frags returning a dangling pointer.

Fix this by clearing napi->skb before the skb is freed.

Fixes: 9b8dd5e5ea ("gve: DQO: Add RX path")
Cc: stable@vger.kernel.org
Reported-by: Shailend Chand <shailend@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Link: https://lore.kernel.org/r/20240612001654.923887-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13 07:37:35 -07:00
Imre Deak
efde66b965 drm/i915/dp_mst: Fix DSC input BPP computation
The branch or sink device decompressing a stream may have a limitation
on the input/uncompressed BPP, which is lower than the base line BPP
(determined by the sink's EDID). In some cases a stream with an input
BPP higher than this limit will be converted automatically by the device
decompressing the stream, by truncating the BPP, however in some cases
- seen at least in Dell dock's DP->HDMI converters - the decompression
will fail.

Fix the above by limiting the input BPP correctly. This is done already
correctly for SST outputs.

Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611153351.3013235-1-imre.deak@intel.com
2024-06-13 17:31:48 +03:00
Taehee Yoo
79f18a41dd ionic: fix use after netif_napi_del()
When queues are started, netif_napi_add() and napi_enable() are called.
If there are 4 queues and only 3 queues are used for the current
configuration, only 3 queues' napi should be registered and enabled.
The ionic_qcq_enable() checks whether the .poll pointer is not NULL for
enabling only the using queue' napi. Unused queues' napi will not be
registered by netif_napi_add(), so the .poll pointer indicates NULL.
But it couldn't distinguish whether the napi was unregistered or not
because netif_napi_del() doesn't reset the .poll pointer to NULL.
So, ionic_qcq_enable() calls napi_enable() for the queue, which was
unregistered by netif_napi_del().

Reproducer:
   ethtool -L <interface name> rx 1 tx 1 combined 0
   ethtool -L <interface name> rx 0 tx 0 combined 1
   ethtool -L <interface name> rx 0 tx 0 combined 4

Splat looks like:
kernel BUG at net/core/dev.c:6666!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16
Workqueue: events ionic_lif_deferred_work [ionic]
RIP: 0010:napi_enable+0x3b/0x40
Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f
RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28
RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20
FS:  0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
 <TASK>
 ? die+0x33/0x90
 ? do_trap+0xd9/0x100
 ? napi_enable+0x3b/0x40
 ? do_error_trap+0x83/0xb0
 ? napi_enable+0x3b/0x40
 ? napi_enable+0x3b/0x40
 ? exc_invalid_op+0x4e/0x70
 ? napi_enable+0x3b/0x40
 ? asm_exc_invalid_op+0x16/0x20
 ? napi_enable+0x3b/0x40
 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
 ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
 ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
 ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
 process_one_work+0x145/0x360
 worker_thread+0x2bb/0x3d0
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xcc/0x100
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x2d/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1a/0x30

Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240612060446.1754392-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13 07:30:06 -07:00
Sasha Neftin
8eef5c3cea Revert "igc: fix a log entry using uninitialized netdev"
This reverts commit 86167183a1.

igc_ptp_init() needs to be called before igc_reset(), otherwise kernel
crash could be observed. Following the corresponding discussion [1] and
[2] revert this commit.

Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1]
Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2]
Fixes: 86167183a1 ("igc: fix a log entry using uninitialized netdev")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13 07:24:52 -07:00
Maxime Ripard
2755d1f46a
drm/connector: hdmi: Fix kerneldoc warnings
It looks like the documentation for the HDMI-related fields recently
added to both the drm_connector and drm_connector_state structures
trigger some warnings because of their use of anonymous structures:

  $ scripts/kernel-doc -none include/drm/drm_connector.h
  include/drm/drm_connector.h:1138: warning: Excess struct member 'broadcast_rgb' description in 'drm_connector_state'
  include/drm/drm_connector.h:1138: warning: Excess struct member 'infoframes' description in 'drm_connector_state'
  include/drm/drm_connector.h:1138: warning: Excess struct member 'avi' description in 'drm_connector_state'
  include/drm/drm_connector.h:1138: warning: Excess struct member 'hdr_drm' description in 'drm_connector_state'
  include/drm/drm_connector.h:1138: warning: Excess struct member 'spd' description in 'drm_connector_state'
  include/drm/drm_connector.h:1138: warning: Excess struct member 'vendor' description in 'drm_connector_state'
  include/drm/drm_connector.h:1138: warning: Excess struct member 'is_limited_range' description in 'drm_connector_state'
  include/drm/drm_connector.h:1138: warning: Excess struct member 'output_bpc' description in 'drm_connector_state'
  include/drm/drm_connector.h:1138: warning: Excess struct member 'output_format' description in 'drm_connector_state'
  include/drm/drm_connector.h:1138: warning: Excess struct member 'tmds_char_rate' description in 'drm_connector_state'
  include/drm/drm_connector.h:2112: warning: Excess struct member 'vendor' description in 'drm_connector'
  include/drm/drm_connector.h:2112: warning: Excess struct member 'product' description in 'drm_connector'
  include/drm/drm_connector.h:2112: warning: Excess struct member 'supported_formats' description in 'drm_connector'
  include/drm/drm_connector.h:2112: warning: Excess struct member 'infoframes' description in 'drm_connector'
  include/drm/drm_connector.h:2112: warning: Excess struct member 'lock' description in 'drm_connector'
  include/drm/drm_connector.h:2112: warning: Excess struct member 'audio' description in 'drm_connector'

Create some intermediate structures instead of anonymous ones to silence
the warnings.

Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: 54cb39e229 ("drm/connector: hdmi: Create an HDMI sub-state")
Fixes: 948f01d5e5 ("drm/connector: hdmi: Add support for output format")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610111200.428224-1-mripard@kernel.org
2024-06-13 15:25:18 +02:00
Peter Ujfalusi
2646b43910 ALSA/hda: intel-dsp-config: Document AVS as dsp_driver option
dsp_driver=4 will force the AVS driver stack to be used, it is better to
docuement this.

Fixes: 1affc44ea5 ("ASoC: Intel: avs: PCI driver implementation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240607060021.11503-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-06-13 14:11:43 +02:00
Stefan Binding
4ecb16d925 ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 4
Add support for this laptop, which uses CS35L41 HDA amps.
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240606130351.333495-5-sbinding@opensource.cirrus.com
2024-06-13 14:10:00 +02:00
Stefan Binding
75f2ea939b ALSA: hda/realtek: Support Lenovo Thinkbook 16P Gen 5
Add support for this laptop, which uses CS35L41 HDA amps.
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.

[ fixed to lower hex numbers in quirk entries -- tiwai ]

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240606130351.333495-4-sbinding@opensource.cirrus.com
2024-06-13 14:09:28 +02:00
Stefan Binding
b32f92d1af ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 4
This laptop does not contain _DSD so needs to be supported using the
configuration table.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240606130351.333495-3-sbinding@opensource.cirrus.com
2024-06-13 14:07:58 +02:00
Stefan Binding
82f3daed2d ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P Gen 5
This laptop does not contain _DSD so needs to be supported using the
configuration table.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240606130351.333495-2-sbinding@opensource.cirrus.com
2024-06-13 14:07:58 +02:00
Dustin L. Howett
e799bdf51d ALSA: hda/realtek: Remove Framework Laptop 16 from quirks
The Framework Laptop 16 does not have a combination headphone/headset
3.5mm jack; however, applying the pincfg from the Laptop 13 (nid=0x19)
erroneously informs hda that the node is present.

Fixes: 8804fa04a4 ("ALSA: hda/realtek: Add Framework laptop 16 to quirks")
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240605-alsa-hda-realtek-remove-framework-laptop-16-from-quirks-v1-1-11d47fe8ec4d@howett.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-06-13 13:21:11 +02:00
Edson Juliano Drosdeck
86a4338629 ALSA: hda/realtek: Limit mic boost on N14AP7
The internal mic boost on the N14AP7 is too high. Fix this by applying the
ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine to limit the gain.

Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240605153923.2837-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-06-13 13:20:22 +02:00
Andy Chi
ea5f8c4cff ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 445/465 G11.
HP ProBook 445/465 G11 needs ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to
make mic-mute/audio-mute working.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240605092243.41963-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-06-13 13:19:09 +02:00
Riana Tauro
2470b141bf drm/xe: move disable_c6 call
disable c6 called in guc_pc_fini_hw is unreachable.

GuC PC init returns earlier if skip_guc_pc is true and never
registers the finish call thus making disable_c6 unreachable.

move this call to gt idle.

v2: rebase
v3: add fixes tag (Himal)

Fixes: 975e4a3795 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606100842.956072-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 6800e63cf9)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-06-13 12:35:13 +02:00
Andrzej Hajda
b5e3a9b83f drm/xe: flush engine buffers before signalling user fence on all engines
Tests show that user fence signalling requires kind of write barrier,
otherwise not all writes performed by the workload will be available
to userspace. It is already done for render and compute, we need it
also for the rest: video, gsc, copy.

Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605-fix_user_fence_posted-v3-2-06e7932f784a@intel.com
(cherry picked from commit 3ad7d18c5d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-06-13 11:36:23 +02:00
Michal Wajdeczko
cd554e1e11 drm/xe/pf: Assert LMEM provisioning is done only on DGFX
The Local Memory (aka VRAM) is only available on DGFX platforms.
We shouldn't attempt to provision VFs with LMEM or attempt to
update the LMTT on non-DGFX platforms. Add missing asserts that
would enforce that and fix release code that could crash on iGFX
due to uninitialized LMTT.

Fixes: 0698ff57bf ("drm/xe/pf: Update the LMTT when freeing VF GT config")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607153155.1592-1-michal.wajdeczko@intel.com
(cherry picked from commit b321cb83a3)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-06-13 11:33:07 +02:00