[ Upstream commit 2602949b22 ]
I recently got occasional build failures at -Os or -Oz that would always
involve waitpid(), where the assembler would complain about this:
init.s: Error: .size expression for waitpid.constprop.0 does not evaluate to a constant
And without -fno-asynchronous-unwind-tables it could also spit such
errors:
init.s:836: Error: CFI instruction used without previous .cfi_startproc
init.s:838: Error: .cfi_endproc without corresponding .cfi_startproc
init.s: Error: open CFI at the end of file; missing .cfi_endproc directive
A trimmed down reproducer is as simple as this:
int main(int argc, char **argv)
{
int ret, status;
if (argc == 0)
ret = waitpid(-1, &status, 0);
else
ret = waitpid(-1, &status, 0);
return status;
}
It produces the following asm code on x86_64:
.text
.section .text.nolibc_memmove_memcpy
.weak memmove
.weak memcpy
memmove:
memcpy:
movq %rdx, %rcx
(...)
retq
.section .text.nolibc_memset
.weak memset
memset:
xchgl %eax, %esi
movq %rdx, %rcx
pushq %rdi
rep stosb
popq %rax
retq
.type waitpid.constprop.0.isra.0, @function
waitpid.constprop.0.isra.0:
subq $8, %rsp
(...)
jmp *.L5(,%rax,8)
.section .rodata
.align 8
.align 4
.L5:
.quad .L10
(...)
.quad .L4
.text
.L10:
(...)
.cfi_def_cfa_offset 8
ret
.cfi_endproc
.LFE273:
.size waitpid.constprop.0.isra.0, .-waitpid.constprop.0.isra.0
It's a bit dense, but here's the explanation: the compiler has emitted a
".text" statement because it knows it's working in the .text section.
Then, our hand-written asm code for the mem* functions forced the section
to .text.something without the compiler knowing about it, so it thinks
the code is still being emitted for .text. As such, without any .section
statement, the waitpid.constprop.0.isra.0 label is in fact placed in the
previously created section, here .text.nolibc_memset.
The waitpid() function involves a switch/case statement that can be
turned to a jump table, which is what the compiler does with the .rodata
section, and after that it restores .text, which is no longer the
previous .text.nolibc_memset section. Then the CFI statements cross a
section, so does the .size calculation, which explains the error.
While a first approach consisting in placing an explicit ".text" at the
end of these functions was verified to work, it's still unreliable as
it depends on what the compiler remembers having emitted previously. A
better approach is to replace the ".section" with ".pushsection", and
place a ".popsection" at the end, so that these code blocks are agnostic
to where they're placed relative to other blocks.
Fixes: 553845eebd ("tools/nolibc: x86-64: Use `rep movsb` for `memcpy()` and `memmove()`")
Fixes: 12108aa8c1 ("tools/nolibc: x86-64: Use `rep stosb` for `memset()`")
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0903296efd ]
The PIPE clock is provided by the USB3 PHY, which is predictably not
connected to the HS-only controller. Add "qcom,select-utmi-as-pipe-clk"
quirk to HS only USB controller to disable pipe clock requirement.
Fixes: de1001525c ("arm64: dts: qcom: sa8775p: add USB nodes")
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251024105019.2220832-3-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b3e8a5d6c ]
The PIPE clock is provided by the USB3 PHY, which is predictably not
connected to the HS-only controller. Add "qcom,select-utmi-as-pipe-clk"
quirk to HS only USB controller to disable pipe clock requirement.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251024105019.2220832-2-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dab10c382 ]
With W=1, the following error comes up:
Warning (graph_child_address): /soc@0/usb@a2f8800/usb@a200000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
This could be since the controller is only HS capable and only one port
node is added.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251019115630.2222720-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee67247843 ]
imx_scu_enable_general_irq_channel() calls of_parse_phandle_with_args(),
but does not release the OF node reference. Add a of_node_put() call
to release the reference.
Fixes: 851826c756 ("firmware: imx: enable imx scu general irq function")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76546090b1 ]
Update the memory region listed in the k3-am62p.dtsi for the BXS-4-64
GPU to match the Main Memory Map described in the TRM [1].
[1] https://www.ti.com/lit/ug/spruj83b/spruj83b.pdf
Fixes: 29075cc09f ("arm64: dts: ti: Introduce AM62P5 family of SoCs")
Signed-off-by: Randolph Sapp <rs@ti.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20250919193341.707660-2-rs@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25423cda14 ]
When Root Complex (RC) triggers a Doorbell interrupt to Endpoint (EP), it
triggers the below warning in the EP:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:271
Call trace:
__might_resched+0x130/0x158
__might_sleep+0x70/0x88
mutex_lock+0x2c/0x80
pci_epc_get_msi+0x78/0xd8
pci_epf_test_raise_irq.isra.0+0x74/0x138
pci_epf_test_doorbell_handler+0x34/0x50
The BUG arises because the EP's pci_epf_test_doorbell_handler() which is
running in the hard IRQ context is making an indirect call to
pci_epc_get_msi(), which uses mutex inside.
To fix the issue, convert the hard IRQ handler to a threaded IRQ handler to
allow it to call functions that can sleep during bottom half execution.
Also, register the threaded IRQ handler with IRQF_ONESHOT to keep the
interrupt line disabled until the threaded IRQ handler completes execution.
Fixes: eff0c286aa ("PCI: endpoint: pci-epf-test: Add doorbell test support")
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
[mani: reworded description a bit]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251014024109.42287-1-bhanuseshukumar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c06a017439 ]
The module alias does not match the cell name defined in the MFD driver,
preventing automatic loading when the driver is built as a module. So fix
the module alias to ensure proper module auto-loading.
Fixes: 0ef2929a01 ("leds: Add AAEON UP board LED driver")
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251020-leds-upboard-fix-module-alias-v2-1-84ac5c3a1a81@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1390b8b3d2 ]
Current unwinding code on error paths of ice_devlink_reinit_up() and
ice_probe() have manual call to ice_deinit_hw() (which is good, as there
is also manual call to ice_hw_init() there), which is then duplicated
(and was prior current series) in ice_deinit_dev().
Fix the above by removing ice_deinit_hw() from ice_deinit_dev().
Add a (now missing) call in ice_remove().
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/intel-wired-lan/20250717-jk-ddp-safe-mode-issue-v1-1-e113b2baed79@intel.com/
Fixes: 4d3f59bfa2 ("ice: split ice_init_hw() out from ice_init_dev()")
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a37f9e2ff ]
ice_deinit_dev() takes care of turning off adminq processing, which is
much needed during driver teardown (remove, reset, error path). Move it
to the very end where applicable.
For example, ice_deinit_hw() called after adminq deinit slows rmmod on
my two-card setup by about 60 seconds.
ice_init_dev() and ice_deinit_dev() scopes were reduced by previous
commits of the series, with a final touch of extracting ice_init_dev_hw()
out now (there is no deinit counterpart).
Note that removed ice_service_task_stop() call from ice_remove() is placed
in the ice_deinit_dev() (and stopping twice makes no sense).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2fb9398f7 ]
Extract ice_init_dev() from ice_init(), to allow service task and IRQ
scheme teardown to be put after clearing SW constructs in the subsequent
commit.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef825bdb46 ]
Move ice_init_pf() out of ice_init_dev().
Do the same for deinit counterpart.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3bf1cdde7 ]
Move udp_tunnel_nic setup and ice_req_irq_msix_misc() call into
ice_init_pf(), remove some redundancy in the former while moving.
Move ice_free_irq_msix_misc() call into ice_deinit_pf(), to mimic
the above in terms of needed cleanup. Guard it via emptiness check,
to keep the allowance of half-initialized pf being cleaned up.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71430451f8 ]
Unroll actions of ice_init_pf() when it fails.
ice_deinit_pf() happens to be perfect to call here.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fe18288fc ]
Move ice_init_interrupt_scheme() prior ice_init_pf().
To enable the move ice_set_pf_caps() was moved out from ice_init_pf()
to the caller (ice_init_dev()), and placed prior to the irq scheme init.
The move makes deinit order of ice_deinit_dev() and failure-path of
ice_init_pf() match (at least in terms of not calling
ice_clear_interrupt_scheme() and ice_deinit_pf() in opposite ways).
The new order aligns with findings made by Jakub Buchocki in
the commit 24b454bc35 ("ice: Fix ice module unload").
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 806c4f32a8 ]
Move service task start out of ice_init_pf(). Do analogous with deinit.
Service task is needed up to the very end of driver removal, later commit
of the series will move it later on execution timeline.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81233d5419 ]
In aie2_get_hwctx_status() and aie2_query_ctx_status_array(), the
functions could return an uninitialized value in some cases. Update them
to always return 0. The amount of valid results is indicated by the
returned buffer_size, element_size, and num_element fields.
Fixes: 2f509fe6a4 ("accel/amdxdna: Add ioctl DRM_IOCTL_AMDXDNA_GET_ARRAY")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251024165503.1548131-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a41281f651 ]
Hardware target implements an address space larger than that PCI BAR can
map. In order to be able to access the whole target address space, the
BAR space is split into 4 segments, of which the last 3, called windows,
can be dynamically mapped to the desired area. This is achieved by
updating WINDOW_REG_ADDRESS register with appropriate window value.
Currently each time when accessing a register that beyond WINDOW_START,
host calculates the window value and caches it after window update,
this way next time when accessing a register falling in the same window,
host knows that the window is already good hence no additional update
needed.
However this mechanism breaks after global reset is triggered in
ath12k_pci_soc_global_reset(), because with global reset hardware resets
WINDOW_REG_ADDRESS register hence the window is not properly mapped any
more. Current host does nothing about this, as a result a subsequent
register access may not work as expected if it falls in a window same as
before.
Although there is no obvious issue seen now, better to fix it to avoid
future problem. The fix is done by restoring the window register after
global reset.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-ath12k-reset-window-cache-v1-1-29e0e751deed@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92664f2e6a ]
A patch to allow specifying FORMAT_AVERAGE to added counters...
broke the internally added counter for Cluster Uncore MHz -- printing it in HEX.
Fixes: dcd1c379b0 ("tools/power turbostat: add format "average" for external attributes")
Reported-by: Andrej Tkalcec <andrej.tkalcec@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 020d5dc578 ]
If no AP instructions are available the AP bus module leaks registered
debug feature files. Change function call order to fix this.
Fixes: cccd85bfb7 ("s390/zcrypt: Rework debug feature invocations.")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b30006b5be ]
ufshcd_enable_intr() is not exported and hence should not be declared in
include/ufs/ufshcd.h.
Fixes: 2537577979 ("scsi: ufs: core: Change MCQ interrupt enable flow")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20251014200118.3390839-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07a75d08cf ]
In case SCLP CPU detection does not work a fallback mechanism using SIGP is
in place. Since a cleanup this does not work correctly anymore: new CPUs
are only considered if their type matches the boot CPU.
Before the cleanup the information if a CPU type should be considered was
also part of a structure generated by the fallback mechanism and indicated
that a CPU type should not be considered when adding CPUs.
Since the rework a global SCLP state is used instead. If the global SCLP
state indicates that the CPU type should be considered and the fallback
mechanism is used, there may be a mismatch with CPU types if CPUs are
added. This can lead to a system with only a single CPU even tough there
are many more CPUs.
Address this by simply copying the boot cpu type into the generated data
structure from the fallback mechanism.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Fixes: d08d94306e ("s390/smp: cleanup core vs. cpu in the SCLP interface")
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a013ca2d4 ]
In ath11k_wmi_send_peer_assoc_cmd(), peer's transmit MCS is sent to
firmware as receive MCS while peer's receive MCS sent as transmit MCS,
which goes against firmwire's definition.
While connecting to a misbehaved AP that advertises 0xffff (meaning not
supported) for 160 MHz transmit MCS map, firmware crashes due to 0xffff
is assigned to he_mcs->rx_mcs_set field.
Ext Tag: HE Capabilities
[...]
Supported HE-MCS and NSS Set
[...]
Rx and Tx MCS Maps 160 MHz
[...]
Tx HE-MCS Map 160 MHz: 0xffff
Swap the assignment to fix this issue.
As the HE rate control mask is meant to limit our own transmit MCS, it
needs to go via he_mcs->rx_mcs_set field. With the aforementioned swapping
done, change is needed as well to apply it to the peer's receive MCS.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 61fe43e721 ("ath11k: add support for setting fixed HE rate/gi/ltf")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-ath11k-mcs-assignment-v1-2-da40825c1783@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47d0cd6bcc ]
While associating, firmware needs to know peer's receive capability to
calculate its own VHT transmit MCS, currently host sends this information
to firmware via mcs->rx_mcs_set field, this is wrong as firmware actually
takes it from mcs->tx_mcs_set field. Till now there is no failure seen
due to this, most likely because almost all peers are advertising the
same capability for both transmit and receive. Swap the assignment to
fix it.
Besides, rate control mask is meant to limit our own transmit MCS, hence
need to go via mcs->tx_mcs_set field. With the aforementioned swapping
done, change is needed as well to apply it to the peer's receive
capability rather than transmit capability.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-ath11k-mcs-assignment-v1-1-da40825c1783@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7066160f5 ]
When the new qos valus setting fails, restore to
the original qos values.
Fixes: 72b010dc33 ("crypto: hisilicon/qm - supports writing QoS int the host")
Signed-off-by: nieweiqiang <nieweiqiang@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df0845cf44 ]
Use check_add_overflow() to guard against potential integer overflows
when adding the binary blob lengths and the size of an asymmetric_key_id
structure and return ERR_PTR(-EOVERFLOW) accordingly. This prevents a
possible buffer overflow when copying data from potentially malicious
X.509 certificate fields that can be arbitrarily large, such as ASN.1
INTEGER serial numbers, issuer names, etc.
Fixes: 7901c1a8ef ("KEYS: Implement binary asymmetric key ID handling")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2286e18e39 ]
In the commit referenced by the Fixes tag, devm_clk_get_enabled() was
introduced to replace devm_clk_get() and clk_prepare_enable(). While
the clk_disable_unprepare() call in the error path was correctly
removed, the one in the remove function was overlooked, leading to a
double disable issue.
Remove the redundant clk_disable_unprepare() call from gsbi_remove()
to fix this issue. Since all resources are now managed by devres
and will be automatically released, the remove function serves no purpose
and can be deleted entirely.
Fixes: 489d7a8cc2 ("soc: qcom: use devm_clk_get_enabled() in gsbi_probe()")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/stable/20251020160215.523-1-vulab%40iscas.ac.cn
Link: https://lore.kernel.org/r/20251020160215.523-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 415aad75c7 ]
The 'Agera' PLLs (with clk_agera_pll_configure) do not take some of the
parameters that are provided in the vendor driver. Instead the upstream
configuration should provide the final user_ctl value that is written to
the USER_CTL register.
Fix the config so that the PLL is configured correctly.
Fixes: 9f0532da42 ("clk: qcom: Add Camera Clock Controller driver for SM7150")
Suggested-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251021-agera-pll-fixups-v1-2-8c1d8aff4afc@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab0e13141d ]
The 'Agera' PLLs (with clk_agera_pll_configure) do not take some of the
parameters that are provided in the vendor driver. Instead the upstream
configuration should provide the final user_ctl value that is written to
the USER_CTL register.
Fix the config so that the PLL is configured correctly, and fixes
CAMCC_MCLK* being stuck off.
Fixes: 80f5451d9a ("clk: qcom: Add camera clock controller driver for SM6350")
Suggested-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251021-agera-pll-fixups-v1-1-8c1d8aff4afc@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 464ce94531 ]
Update to use the expected icc_first_node_id for registering the icc
clocks, ensuring correct association of clocks with interconnect nodes.
Fixes: 170f3d2c06 ("clk: qcom: ipq5424: Use icc-clk for enabling NoC related clocks")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-1-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18da820eb6 ]
The pipe clocks for PCIE and USB are externally sourced and they should
not be polled by the clock driver. Update the halt_check flags to 'SKIP'
to disable polling for these clocks.
This helps avoid the clock status stuck at 'off' warnings, which are
benign, since all consumers of the PHYs must initialize a given instance
before performing any operations.
Fixes: efe504300a ("clk: qcom: gcc: Add support for Global Clock Controller")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250925-glymur_gcc_usb_fixes-v2-1-ee4619571efe@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 393f7834cd ]
The SD card support requires a 37.5MHz clock; add it to the frequency
list for the storage SW driver to be able to request for the frequency.
Fixes: 3267c774f3 ("clk: qcom: Add support for GCC on SM8750")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250924-sm8750_gcc_sdcc2_frequency-v1-1-541fd321125f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a76ce61d72 ]
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
all other GDSC power domains provided by the SM6350 camera clock controller
to enforce a correct sequence of enabling and disabling power domains by
the consumers, this fixes the CAMCC as a supplier of power domains to CAMSS
IP and its driver.
Fixes: 80f5451d9a ("clk: qcom: Add camera clock controller driver for SM6350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8f1121ebf ]
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
all other GDSC power domains provided by the SM8550 camera clock controller
to enforce a correct sequence of enabling and disabling power domains by
the consumers, this fixes the CAMCC as a supplier of power domains to CAMSS
IP and its driver.
Fixes: ccc4e6a061 ("clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d55f3d2375 ]
Currently, the i.MX UART driver enables wake-related registers for all
UART devices by default. However, this is unnecessary for devices that
are not configured as wakeup sources. To address this, add a
device_may_wakeup() check before configuring the UART wake-related
registers.
Fixes: db1a9b5500 ("tty: serial: imx: Allow UART to be a source for wakeup")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251002045259.2725461-2-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d48fb15e6a ]
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: d57801c45f ("uio: uio_fsl_elbc_gpcm: use device-managed allocators")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Link: https://patch.msgid.link/20251015064020.56589-1-liqiang01@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d312742f68 ]
Since the reliance on ARM-specific struct pci_sys_data was removed, this
driver can be compile-tested on other architectures.
While at it, make the help text a bit more generic, as some members of
the R-Car Gen2 family have a different number of internal PCI
controllers.
Fixes: 4a957563fe ("PCI: rcar-gen2: Convert to use modern host bridge probe functions")
Suggested-by: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add rcar-gen2 to subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/00f75d6732eacce93f04ffaeedc415d2db714cd6.1759480426.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4348c22a4f ]
Both the start address and size are incorrect for the apm_sysreg DT
node. Update to match the TRM (rather than how it was defined
downstream).
Fixes: ea89fdf24f ("arm64: dts: exynos: google: Add initial Google gs101 SoC support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251013-automatic-clocks-v1-5-72851ee00300@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddb2a16804 ]
The memory map lists each clock module unit as having a size of
0x10000. Additionally there are some undocumented registers in this region
that need to be used for automatic clock gating mode. Some of those
registers also need to be saved/restored on suspend & resume.
Fixes: 86124c7668 ("arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller")
Fixes: 4982a4a209 ("arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller")
Fixes: 7d66d98b5b ("arm64: dts: exynos: gs101: enable cmu-peric1 clock controller")
Fixes: e62c706f3a ("arm64: dts: exynos: gs101: enable cmu-peric0 clock controller")
Fixes: ea89fdf24f ("arm64: dts: exynos: google: Add initial Google gs101 SoC support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251013-automatic-clocks-v1-4-72851ee00300@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1204e5846 ]
Check the error code of evsel__get_arch() in the symbol__annotate().
Previously it checked non-zero value but after the refactoring it does
only for negative values.
Fixes: 0669729eb0 ("perf annotate: Factor out evsel__get_arch()")
Suggested-by: James Clark <james.clark@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tianyou Li <tianyou.li@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9db04b310e ]
SDHC1 on the GW702x SOM routes to a connector for use on a baseboard
and as such are defined in the baseboard device-trees.
Remove it from the gw702x SOM device-tree.
Fixes: 0d5b288c21 ("arm64: dts: freescale: Add imx8mp-venice-gw7905-2x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit effe98060f ]
UART1 and UART3 go to a connector for use on a baseboard and as such are
defined in the baseboard device-trees. Remove them from the gw702x SOM
device-tree.
Fixes: 0d5b288c21 ("arm64: dts: freescale: Add imx8mp-venice-gw7905-2x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d949b8d12d ]
The SDHC1 interface is not used on the imx8mm-venice-gw72xx. Remove the
unused pinctrl_usdhc1 iomux node.
Fixes: 6f30b27c5e ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04a899573f ]
Yinhao et al. reported that their fuzzer tool was able to trigger a
skb_warn_bad_offload() from netif_skb_features() -> gso_features_check().
When a BPF program - triggered via BPF test infra - pushes the packet
to the loopback device via bpf_clone_redirect() then mentioned offload
warning can be seen. GSO-related features are then rightfully disabled.
We get into this situation due to convert___skb_to_skb() setting
gso_segs and gso_size but not gso_type. Technically, it makes sense
that this warning triggers since the GSO properties are malformed due
to the gso_type. Potentially, the gso_type could be marked non-trustworthy
through setting it at least to SKB_GSO_DODGY without any other specific
assumptions, but that also feels wrong given we should not go further
into the GSO engine in the first place.
The checks were added in 121d57af30 ("gso: validate gso_type in GSO
handlers") because there were malicious (syzbot) senders that combine
a protocol with a non-matching gso_type. If we would want to drop such
packets, gso_features_check() currently only returns feature flags via
netif_skb_features(), so one location for potentially dropping such skbs
could be validate_xmit_unreadable_skb(), but then otoh it would be
an additional check in the fast-path for a very corner case. Given
bpf_clone_redirect() is the only place where BPF test infra could emit
such packets, lets reject them right there.
Fixes: 850a88cc40 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN")
Fixes: cf62089b0e ("bpf: Add gso_size to __sk_buff")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251020075441.127980-1-daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d60055cf52 ]
Commit c807ab520f ("block/mq-deadline: Add I/O priority support")
modified the behavior of request flag BLK_MQ_INSERT_AT_HEAD from
dispatching a request before other requests into dispatching a request
before other requests with the same I/O priority. This is not correct since
BLK_MQ_INSERT_AT_HEAD is used when requeuing requests and also when a flush
request is inserted. Both types of requests should be dispatched as soon
as possible. Hence, make the mq-deadline I/O scheduler again ignore the I/O
priority for BLK_MQ_INSERT_AT_HEAD requests.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Yu Kuai <yukuai@kernel.org>
Reported-by: chengkaitao <chengkaitao@kylinos.cn>
Closes: https://lore.kernel.org/linux-block/20251009155253.14611-1-pilgrimtao@gmail.com/
Fixes: c807ab520f ("block/mq-deadline: Add I/O priority support")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moalv <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93a358af59 ]
Prepare for adding a second caller of this function. No functionality
has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Yu Kuai <yukuai@kernel.org>
Cc: chengkaitao <chengkaitao@kylinos.cn>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: d60055cf52 ("block/mq-deadline: Switch back to a single dispatch list")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 932ec9dff6 ]
devm_pm_runtime_enable() is used in the probe, so pm_runtime_disable()
should not be called explicitly in the remove function.
Fixes: 1c72774df0 ("PCI: sg2042: Add Sophgo SG2042 PCIe driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # on Pioneerbox.
Acked-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/242eca0ff6601de7966a53706e9950fbcb10aac8.1759169586.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b04d8f005 ]
Commit afddce13ce ("crypto: api - Add reqsize to crypto_alg")
introduced cra_reqsize field in crypto_alg struct to replace type
specific reqsize fields. It looks like this was introduced specifically
for ahash and acomp from the commit description as subsequent commits
add necessary changes in these alg frameworks.
However, this is being recommended for use in all crypto algs
instead of setting reqsize using crypto_*_set_reqsize(). Using
cra_reqsize in aead algorithms, hence, causes memory corruptions and
crashes as the underlying functions in the algorithm framework have not
been updated to set the reqsize properly from cra_reqsize. [1]
Add proper set_reqsize calls in the aead init function to properly
initialize reqsize for these algorithms in the framework.
[1]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b
Fixes: afddce13ce ("crypto: api - Add reqsize to crypto_alg")
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
