[ Upstream commit 9682cfd197 ]
Fix the IP name errors in the register maps used by the following
debugfs attributes in the Meteor Lake SOC-M PMC.
pfear_sts
lpm_sts
ltr_show
Fixes: c5ad454a12 ("platform/x86: intel/pmc/core: Add Meteor Lake support to pmc core driver")
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-2-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 200b8f85f2 ]
In the post init sequence of v2.9.0, write access to read only registers
are not disabled after updating the registers. Fix it by disabling the
access after register update.
While at it, let's also add a newline after existing dw_pcie_dbi_ro_wr_en()
guard function to align with rest of the driver.
Link: https://lore.kernel.org/r/20230619150408.8468-4-manivannan.sadhasivam@linaro.org
Fixes: 0cf7c2efe8 ("PCI: qcom: Add IPQ60xx support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60f0072d7f ]
DWC core already exposes dw_pcie_dbi_ro_wr_{en/dis} helper APIs for
enabling and disabling the write access to read only DBI registers. So
let's use them instead of doing it manually.
Also, the existing code doesn't disable the write access when it's done.
This is also fixed now.
Link: https://lore.kernel.org/r/20230619150408.8468-3-manivannan.sadhasivam@linaro.org
Fixes: 5d76117f07 ("PCI: qcom: Add support for IPQ8074 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6399b8930 ]
The suspend_restore_csrs is called in both __hibernate_cpu_resume
and the `else` of subsequent swsusp_arch_suspend.
Removing the first call makes both suspend_{save,restore}_csrs
left in swsusp_arch_suspend for clean code.
Fixes: c031721001 ("RISC-V: Add arch functions to support hibernation/suspend-to-disk")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: JeeHeng Sia <jeeheng.sia@starfivetech.com>
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/20230522025020.285042-1-songshuaishuai@tinylab.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b684c09f09 ]
ppc_save_regs() skips one stack frame while saving the CPU register states.
Instead of saving current R1, it pulls the previous stack frame pointer.
When vmcores caused by direct panic call (such as `echo c >
/proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the
backtrace correctly. On further analysis, it was found that it was because
of mismatch between r1 and NIP.
GDB uses NIP to get current function symbol and uses corresponding debug
info of that function to unwind previous frames, but due to the
mismatching r1 and NIP, the unwinding does not work, and it fails to
unwind to the 2nd frame and hence does not show the backtrace.
GDB backtrace with vmcore of kernel without this patch:
---------
(gdb) bt
#0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>,
newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69
#1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974
#2 0x0000000000000063 in ?? ()
#3 0xc000000003579320 in ?? ()
---------
Further analysis revealed that the mismatch occurred because
"ppc_save_regs" was saving the previous stack's SP instead of the current
r1. This patch fixes this by storing current r1 in the saved pt_regs.
GDB backtrace with vmcore of patched kernel:
--------
(gdb) bt
#0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8)
at ./arch/powerpc/include/asm/kexec.h:69
#1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974
#2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n")
at kernel/panic.c:358
#3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155
#4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false)
at drivers/tty/sysrq.c:602
#5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>,
count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163
#6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>,
buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340
#7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>,
ppos=<optimized out>) at fs/proc/inode.c:352
#8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00,
buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>,
count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582
#9 0xc0000000005b4264 in ksys_write (fd=<optimized out>,
buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2)
at fs/read_write.c:637
#10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>)
at arch/powerpc/kernel/syscall.c:171
#11 0xc00000000000c270 in system_call_vectored_common ()
at arch/powerpc/kernel/interrupt_64.S:192
--------
Nick adds:
So this now saves regs as though it was an interrupt taken in the
caller, at the instruction after the call to ppc_save_regs, whereas
previously the NIP was there, but R1 came from the caller's caller and
that mismatch is what causes gdb's dwarf unwinder to go haywire.
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Fixes: d16a58f885 ("powerpc: Improve ppc_save_regs()")
Reivewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230615091047.90433-1-adityag@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4f913c980 ]
Currently pointer iov is being dereferenced before the null check of iov
which can lead to null pointer dereference errors. Fix this by moving the
iov null check before the dereferencing.
Detected using cppcheck static analysis:
linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either
the condition '!iov' is redundant or there is possible null pointer
dereference: iov. [nullPointerRedundantCheck]
num_vfs = iov->num_vfs;
^
Fixes: 052da31d45 ("powerpc/powernv/sriov: De-indent setup and teardown")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230608095849.1147969-1-colin.i.king@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fef6bb730 ]
In MCQ mode, when a device command uses a hardware queue shared with other
commands, a race condition may occur in the following scenario:
1. A device command is completed in CQx with CQE entry "e".
2. The interrupt handler copies the "cqe" pointer to "hba->dev_cmd.cqe"
and completes "hba->dev_cmd.complete".
3. The "ufshcd_wait_for_dev_cmd()" function is awakened and retrieves the
OCS value from "hba->dev_cmd.cqe".
However, there is a possibility that the CQE entry "e" will be overwritten
by newly completed commands in CQx, resulting in an incorrect OCS value
being received by "ufshcd_wait_for_dev_cmd()".
To avoid this race condition, the OCS value should be immediately copied to
the struct "lrb" of the device command. Then "ufshcd_wait_for_dev_cmd()"
can retrieve the OCS value from the struct "lrb".
Fixes: 57b1c0ef89 ("scsi: ufs: core: mcq: Add support to allocate multiple queues")
Suggested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Link: https://lore.kernel.org/r/20230610021553.1213-2-powen.kao@mediatek.com
Tested-by: Po-Wen Kao <powen.kao@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72554035b9 ]
ufshcd_add_command_trace() traces SCSI commands. Remove a
ufshcd_add_command_trace() call from a code path that is not related to
SCSI commands.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230531224050.25554-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 0fef6bb730 ("scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed4090a22c ]
When it runs multiple times with -r option, it missed to reset the
aggregation counters and the values were added up. The aggregation
count has the values to be printed in the end. It should reset the
counters at the beginning of each run. But the current code does that
only when -I/--interval-print option is given.
Fixes: 91f85f98da ("perf stat: Display event stats using aggr counts")
Reported-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230616073211.1057936-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9063777ca1 ]
The config passed in by pad wakeup is 1, when num_configs is 1,
Configuration [1] should not be fetched, which will be detected
by KASAN as a memory out of bounds condition. Modify to get
configs[1] when num_configs is 2.
Fixes: f60c9eac54 ("gpio: mxc: enable pad wakeup on i.MX8x platforms")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230504233736.3766296-1-xiaolei.wang@windriver.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4bda59b47 ]
The refcount on mm is dropped before the coprocessor is detached.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 7bc6f71bdf ("powerpc/vas: Define and use common vas_window struct")
Fixes: b22f2d88e4 ("powerpc/pseries/vas: Integrate API with open/close windows")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230607101024.14559-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cd1ca4650 ]
There are multiple places where x86 specific code determines AMD vs
Intel arch and acts based on that. Consolidate those checks into a
single function.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230613095506.547-3-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 99d4850062 ("perf tool x86: Fix perf_env memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 966cca72ab ]
Currently rbtn_add() in case of failure is leaking resources. Fix this
by adding a proper rollback. Move devm_kzalloc() before rbtn_acquire(),
so it doesn't require rollback in case of failure. While at it, remove
unnecessary assignment of NULL to device->driver_data and unnecessary
whitespace, plus add a break for the default case in a switch.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Pali Rohár <pali@kernel.org>
Fixes: 817a5cdb40 ("dell-rbtn: Dell Airplane Mode Switch driver")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20230613084310.2775896-1-michal.wilczynski@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3ac3b0779 ]
Test "perf script task-analyzer tests" fails in environment with missing
libtraceevent support, as perf record fails to create the perf.data
file, which further tests depend on.
Instead, when perf is not compiled with libtraceevent support, skip
those tests instead of failing them, by checking the output of `perf
record --dry-run` to see if it prints the error "libtraceevent is
necessary for tracepoint support"
For the following output, perf compiled with: `make NO_LIBTRACEEVENT=1`
Before the patch:
108: perf script task-analyzer tests :
test child forked, pid 24105
failed to open perf.data: No such file or directory (try 'perf record' first)
FAIL: "invokation of perf script report task-analyzer command failed" Error message: ""
FAIL: "test_basic" Error message: "Failed to find required string:'Comm'."
failed to open perf.data: No such file or directory (try 'perf record' first)
FAIL: "invokation of perf script report task-analyzer --ns --rename-comms-by-tids 0:random command failed" Error message: ""
FAIL: "test_ns_rename" Error message: "Failed to find required string:'Comm'."
failed to open perf.data: No such file or directory (try 'perf record' first)
<...>
perf script task-analyzer tests: FAILED!
With this patch, the script instead returns 2 signifying SKIP, and after
the patch:
108: perf script task-analyzer tests :
test child forked, pid 26010
libtraceevent is necessary for tracepoint support
WARN: Skipping tests. No libtraceevent support
test child finished with -2
perf script task-analyzer tests: Skip
Fixes: e8478b84d6 ("perf test: Add new task-analyzer tests")
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-18-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c4396efb5 ]
${$1} gives bad substitution error on sh, bash, and zsh. This seems like
a typo, and this patch modifies it to $1, since that is what it's usage
looks like from wherever `check_exec_0` is called.
This issue due to ${$1} caused all function calls to give error in
`find_str_or_fail` line, and so no test runs completely. But
'perf test "perf script task-analyzer tests"' wrongly reports
that tests passed with the status OK, which is wrong considering
the tests didn't even run completely
Fixes: e8478b84d6 ("perf test: add new task-analyzer tests")
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-16-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4c4e8a538 ]
The no group check fails if there is more than one meticgroup in the
metricgroup_no_group.
The first parameter of the match_metric() should be the string, while
the substring should be the second parameter.
Fixes: ccc66c6092 ("perf metric: JSON flag to not group events if gathering a metric group")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230607162700.3234712-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3abfcfd847 ]
The die_get_varname() returns "(unknown_type)" string if it failed to
find a type for the variable. But it had a space before the opening
parenthesis and it made the closing parenthesis cut off due to the
off-by-one in the string length (14).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 88fd633cdf ("perf probe: No need to use formatting strbuf method")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230612234102.3909116-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2b689ab2f ]
An earlier commit placed some driverless devices in D3 during boot so that
they don't block package cstate entry on Meteor Lake. Also place these
devices in D3 after resume from suspend.
Fixes: 336ba968d3 ("platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230607233849.239047-2-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 801e5dc985 ]
Add a resume callback to perform platform specific functions during resume
from suspend.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230607233849.239047-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: f2b689ab2f ("platform/x86/intel/pmc/mtl: Put devices in D3 during resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f999e23ce6 ]
Fix issues identified in dytc_profile_refresh identified by lkp-tests.
drivers/platform/x86/thinkpad_acpi.c:10538
dytc_profile_refresh() error: uninitialized symbol 'funcmode'.
drivers/platform/x86/thinkpad_acpi.c:10531
dytc_profile_refresh() error: uninitialized symbol 'output'.
drivers/platform/x86/thinkpad_acpi.c:10537
dytc_profile_refresh() error: uninitialized symbol 'output'.
These issues should not lead to real problems in the field as the refresh
function should only be called if MMC or PSC mode enabled. But good to fix.
Thanks to Dan Carpenter and the lkp-tests project for flagging these.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202306011202.1hbgLRD4-lkp@intel.com/
Fixes: 1bc5d819f0 ("platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230606151804.8819-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36d3e4138e ]
When printing output we may want to generate per event files, where the
--per-event-dump option should be used, creating perf.data.EVENT.dump
files instead of printing to stdout.
The callback thar processes event thus expects that evsel->priv->fp
should point to either the per-event FILE descriptor or to stdout.
The a3af66f51b ("perf script: Fix crash because of missing
evsel->priv") changeset fixed a case where evsel->priv wasn't setup,
thus set to NULL, causing a segfault when trying to access
evsel->priv->fp.
But it did it for the non --per-event-dump case by allocating a 'struct
perf_evsel_script' just to set its ->fp to stdout.
Since evsel->priv is only freed when --per-event-dump is used, we ended
up with a memory leak, detected using ASAN.
Fix it by using the same method as perf_script__setup_per_event_dump(),
and reuse that static 'struct perf_evsel_script'.
Also check if evsel_script__new() failed.
Fixes: a3af66f51b ("perf script: Fix crash because of missing evsel->priv")
Reported-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/lkml/ZH+F0wGAWV14zvMP@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a03b1a0b19 ]
Looking at generated code for handle_signal32() shows calls to a
function called __unsafe_save_user_regs.constprop.0 while user access
is open.
And that __unsafe_save_user_regs.constprop.0 function has two nops at
the begining, allowing it to be traced, which is unexpected during
user access open window.
The solution could be to mark __unsafe_save_user_regs() no trace, but
to be on the safe side the most efficient is to flag it __always_inline
as already done for function __unsafe_restore_general_regs(). The
function is relatively small and only called twice, so the size
increase will remain in the noise.
Do the same with save_tm_user_regs_unsafe() as it may suffer the
same issue.
Fixes: ef75e73182 ("powerpc/signal32: Transform save_user_regs() and save_tm_user_regs() in 'unsafe' version")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/7e469c8f01860a69c1ada3ca6a5e2aa65f0f74b2.1685955220.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0eb089a72f ]
A disassembly of interrupt_exit_kernel_prepare() shows a useless read
of MSR register. This is shown by r9 being re-used immediately without
doing anything with the value read.
c000e0e0: 60 00 00 00 nop
c000e0e4: 7d 3a c2 a6 mfmd_ap r9
c000e0e8: 7d 20 00 a6 mfmsr r9
c000e0ec: 7c 51 13 a6 mtspr 81,r2
c000e0f0: 81 3f 00 84 lwz r9,132(r31)
c000e0f4: 71 29 80 00 andi. r9,r9,32768
This is due to the use of local_irq_save(). The flags read by
local_irq_save() are never used, use local_irq_disable() instead.
Fixes: 13799748b9 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/df36c6205ab64326fb1b991993c82057e92ace2f.1685955214.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 353e7300a1 ]
Activating KCSAN on a 32 bits architecture leads to the following
link-time failure:
LD .tmp_vmlinux.kallsyms1
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_load':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_load_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_store':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_store_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_exchange':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_exchange_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_add':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_add_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_sub':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_sub_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_and':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_and_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_or':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_or_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_xor':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_xor_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_nand':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_nand_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_strong':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_weak':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_val':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
32 bits architectures don't have 64 bits atomic builtins. Only
include DEFINE_TSAN_ATOMIC_OPS(64) on 64 bits architectures.
Fixes: 0f8ad5f2e9 ("kcsan: Add support for atomic builtins")
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d9c6afc28d0855240171a4e0ad9ffcdb9d07fceb.1683892665.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad64639417 ]
Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap().
Fixes: 3b588e43ee ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230607095829.1345-1-jiasheng@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cebb42412 ]
NVME passwords identifier have been standardised across the Lenovo
systems and now use udrp and adrp (user and admin level) instead of
unvp and mnvp.
This should apparently be backwards compatible.
Fixes: 640a5fa50a ("platform/x86: think-lmi: Opcode support")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230601200552.4396-6-mpearson-lenovo@squebb.ca
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97eef59833 ]
The system password identification was incorrect. This means that if
the password was enabled it wouldn't be detected correctly; and setting
it would not work.
Also updated code to use TLMI_SMP_PWD instead of TLMI_SYS_PWD to be in
sync with Lenovo documentation.
Fixes: 640a5fa50a ("platform/x86: think-lmi: Opcode support")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230601200552.4396-3-mpearson-lenovo@squebb.ca
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c41e0121a1 ]
When an attribute is being changed if the Admin account is enabled, or if
a password is being updated then multiple WMI calls are needed.
Add mutex protection to ensure no race conditions are introduced.
Fixes: b49f72e7f9 ("platform/x86: think-lmi: Certificate authentication support")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230601200552.4396-1-mpearson-lenovo@squebb.ca
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 416a87c972 ]
commit c5ad454a12 ("platform/x86: intel/pmc/core: Add Meteor Lake
support to pmc core driver") was supposed to add support for Meter
Lake P/M and mistakenly added support for Meteor Lake S instead. Meteor
Lake P/M support was added later and MTL-S support needs to be removed
since its currently assigned to the wrong register maps.
Fixes: c5ad454a12 ("platform/x86: intel/pmc/core: Add Meteor Lake support to pmc core driver")
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230601004706.871528-1-xi.pardee@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5835196a17 ]
Currently the getter returns ENOTSUPP on pin configured in
the push-pull mode. Fix this by adding the missed switch case.
Fixes: ccdf81d08d ("pinctrl: cherryview: add option to set open-drain pin config")
Fixes: 6e08d6bbeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16203e9cd0 ]
Without this we were not getting the thousands separator for big
numbers.
Noticed while developing 'perf bench uprobe', but the use of %' predates
that, for instance 'perf bench syscall' uses it.
Before:
# perf bench uprobe all
# Running uprobe/baseline benchmark...
# Executed 1000 usleep(1000) calls
Total time: 1054082243ns
1054082.243000 nsecs/op
#
After:
# perf bench uprobe all
# Running uprobe/baseline benchmark...
# Executed 1,000 usleep(1000) calls
Total time: 1,053,715,144ns
1,053,715.144000 nsecs/op
#
Fixes: c2a0820305 ("perf bench: Add basic syscall benchmark")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andre Fredette <anfredet@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/lkml/ZH3lcepZ4tBYr1jv@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fad5723350 ]
The function table is filled with group information based on other
instance-specific data at runtime. However, the function table can be
shared between multiple instances, causing the ->probe() function for
one instance to overwrite the table of a previously probed instance.
Fix this by sharing only the function names and allocating a separate
function table for each instance.
Fixes: 5a00473607 ("pinctrl: tegra: Separate Tegra194 instances")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230530105308.1292852-1-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 549e91a9bb ]
ufshcd_queuecommand() may be called two times in a row for a SCSI command
before it is completed. Hence make the following changes:
- In the functions that submit a command, do not check the old value of
lrbp->cmd nor clear lrbp->cmd in error paths.
- In ufshcd_release_scsi_cmd(), do not clear lrbp->cmd.
See also scsi_send_eh_cmnd().
This commit prevents that the following appears if a command times out:
WARNING: at drivers/ufs/core/ufshcd.c:2965 ufshcd_queuecommand+0x6f8/0x9a8
Call trace:
ufshcd_queuecommand+0x6f8/0x9a8
scsi_send_eh_cmnd+0x2c0/0x960
scsi_eh_test_devices+0x100/0x314
scsi_eh_ready_devs+0xd90/0x114c
scsi_error_handler+0x2b4/0xb70
kthread+0x16c/0x1e0
Fixes: 5a0b0cb9be ("[SCSI] ufs: Add support for sending NOP OUT UPIU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230524203659.1394307-3-bvanassche@acm.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe8637f770 ]
One UFS vendor asked to increase the UFS timeout from 1 s to 3 s. Another
UFS vendor asked to increase the UFS timeout from 1 s to 10 s. Hence this
patch that increases the UFS timeout to 10 s. This patch can cause the
total timeout to exceed 20 s, the Android shutdown timeout. This is fine
since the loop around ufshcd_execute_start_stop() exists to deal with unit
attentions and because unit attentions are reported quickly.
Fixes: dcd5b7637c ("scsi: ufs: Reduce the START STOP UNIT timeout")
Fixes: 8f2c96420c ("scsi: ufs: core: Reduce the power mode change timeout")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230524203659.1394307-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9914a3d033 ]
When NPIV ports are zoned to devices that support both initiator and target
mode, a remote device's initiated PRLI results in unintended final kref
clean up of the device's ndlp structure. This disrupts NPIV ports'
discovery for target devices that support both initiator and target mode.
Modify the NPIV lpfc_drop_node clause such that we allow the ndlp to live
so long as it was in NLP_STE_PLOGI_ISSUE, NLP_STE_REG_LOGIN_ISSUE, or
NLP_STE_PRLI_ISSUE nlp_state. This allows lpfc's issued PRLI completion
routine to determine if the final kref clean up should execute rather than
a remote device's issued PRLI.
Fixes: db651ec225 ("scsi: lpfc: Correct used_rpi count when devloss tmo fires with no recovery")
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aa5ac6332 ]
Add a pci_clear_master() stub when CONFIG_PCI is not set so drivers that
support both PCI and platform devices don't need #ifdefs or extra Kconfig
symbols for the PCI parts.
[bhelgaas: commit log]
Fixes: 6a479079c0 ("PCI: Add pci_clear_master() as opposite of pci_set_master()")
Link: https://lore.kernel.org/r/20230531102744.2354313-1-suijingfeng@loongson.cn
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b68b7f9c4 ]
ufshcd_hold() and ufshcd_release are declared twice: once in
drivers/ufs/core/ufshcd-priv.h and a second time in include/ufs/ufshcd.h.
Remove the declarations from ufshcd-priv.h.
Fixes: dd11376b9f ("scsi: ufs: Split the drivers/scsi/ufs directory")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230529202640.11883-5-bvanassche@acm.org
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c60738de85 ]
Smatch reported:
1. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn:
'clk' from clk_prepare_enable() not released on lines: 442,451,462,478,512,517.
2. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn:
'p->bus_clk' from clk_prepare_enable() not released on lines: 451,462,478,512,517.
The clock resource is obtained by devm_clk_get(), and then
clk_prepare_enable() makes the clock resource ready for use. After that,
clk_disable_unprepare() should be called to release the clock resource
when it is no longer needed. However, while doing some error handling
in faraday_pci_probe(), clk_disable_unprepare() is not called to release
clk and p->bus_clk before returning. These return lines are exactly 442,
451, 462, 478, 512, 517.
Fix this warning by replacing devm_clk_get() with devm_clk_get_enabled(),
which is equivalent to devm_clk_get() + clk_prepare_enable(). And with
devm_clk_get_enabled(), the clock will automatically be disabled,
unprepared and freed when the device is unbound from the bus.
Link: https://lore.kernel.org/r/20230508043641.23807-1-yejunyan@hust.edu.cn
Fixes: b3c433efb8 ("PCI: faraday: Fix wrong pointer passed to PTR_ERR()")
Fixes: 2eeb02b285 ("PCI: faraday: Add clock handling")
Fixes: 783a862563 ("PCI: faraday: Use pci_parse_request_of_pci_ranges()")
Fixes: d3c68e0a7e ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Fixes: f1e8bd21e3 ("PCI: faraday: Convert IRQ masking to raw PCI config accessors")
Signed-off-by: Junyan Ye <yejunyan@hust.edu.cn>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 797b9ec8c4 ]
Address/memory sanitizer was reporting issues in evsel__group_pmu_name
because the for_each_group_evsel loop didn't terminate when the head
was reached, the head would then be cast and accessed as an evsel
leading to invalid memory accesses.
Fix for_each_group_member and for_each_group_evsel to terminate at the
list head. Note, evsel__group_pmu_name no longer iterates the group, but
the problem is present regardless.
Fixes: 717e263fc3 ("perf report: Show group description when event group is enabled")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230526194442.2355872-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8afd0d9fc ]
If a PCIe hotplug slot has an Attention Button, the normal hot-add flow is:
- Slot is empty and slot power is off
- User inserts card in slot and presses Attention Button
- OS blinks Power Indicator for 5 seconds
- After 5 seconds, OS turns on Power Indicator, turns on slot power, and
enumerates the device
Previously, if a user pressed the Attention Button on an *empty* slot,
pciehp logged the following messages and blinked the Power Indicator
until a second button press:
[0.000] pciehp: Button press: will power on in 5 sec
[0.001] # Power Indicator starts blinking
[5.001] # 5 second timeout; slot is empty, so we should cancel the
request to power on and turn off Power Indicator
[7.000] # Power Indicator still blinking
[8.000] # possible card insertion
[9.000] pciehp: Button press: canceling request to power on
The first button press incorrectly left the slot in BLINKINGON_STATE, so
the second was interpreted as a "cancel power on" event regardless of
whether a card was present.
If the slot is empty, turn off the Power Indicator and return from
BLINKINGON_STATE to OFF_STATE after 5 seconds, effectively canceling the
request to power on. Putting the slot in OFF_STATE also means the second
button press will correctly request a slot power on if the slot is
occupied.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230512021518.336460-1-clementwei90@163.com
Fixes: d331710ea7 ("PCI: pciehp: Become resilient to missed events")
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e2fe5ac69 ]
Smatch complains that:
tw_probe() warn: missing error code 'retval'
This patch adds error checking to tw_probe() to handle initialization
failure. If tw_reset_sequence() function returns a non-zero value, the
function will return -EINVAL to indicate initialization failure.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yuchen Yang <u202114568@hust.edu.cn>
Link: https://lore.kernel.org/r/20230505141259.7730-1-u202114568@hust.edu.cn
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 456d8aa37d ]
Struct pcie_link_state->downstream is a pointer to the pci_dev of function
0. Previously we retained that pointer when removing function 0, and
subsequent ASPM policy changes dereferenced it, resulting in a
use-after-free warning from KASAN, e.g.:
# echo 1 > /sys/bus/pci/devices/0000:03:00.0/remove
# echo powersave > /sys/module/pcie_aspm/parameters/policy
BUG: KASAN: slab-use-after-free in pcie_config_aspm_link+0x42d/0x500
Call Trace:
kasan_report+0xae/0xe0
pcie_config_aspm_link+0x42d/0x500
pcie_aspm_set_policy+0x8e/0x1a0
param_attr_store+0x162/0x2c0
module_attr_store+0x3e/0x80
PCIe spec r6.0, sec 7.5.3.7, recommends that software program the same ASPM
Control value in all functions of multi-function devices.
Disable ASPM and free the pcie_link_state when any child function is
removed so we can discard the dangling pcie_link_state->downstream pointer
and maintain the same ASPM Control configuration for all functions.
[bhelgaas: commit log and comment]
Debugged-by: Zongquan Qin <qinzongquan@sangfor.com.cn>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Fixes: b5a0a9b59c ("PCI/ASPM: Read and set up L1 substate capabilities")
Link: https://lore.kernel.org/r/20230507034057.20970-1-dinghui@sangfor.com.cn
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e6380d657 ]
Set default keyboard backlight brightness on probe(), this fixes
the backlight being off after a rmmod + modprobe.
Fixes: c0549b72d9 ("platform/x86: lenovo-yogabook-wmi: Add driver for Lenovo Yoga Book")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230430165807.472798-5-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 711bcc0cb3 ]
Ensure that both the keyboard touchscreen and the digitizer have their
driver bound after remove(). Without this modprobing lenovo-yogabook-wmi
after a rmmod fails because lenovo-yogabook-wmi defers probing until
both devices have their driver bound.
Fixes: c0549b72d9 ("platform/x86: lenovo-yogabook-wmi: Add driver for Lenovo Yoga Book")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230430165807.472798-4-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
