[ Upstream commit 5488a29596 ]
When DRM_BUDDY_CONTIGUOUS_ALLOCATION is set, the requested size is
rounded up to the next power-of-two via roundup_pow_of_two().
Similarly, for non-contiguous allocations with large min_block_size,
the size is aligned up via round_up(). Both operations can produce a
rounded size that exceeds mm->size, which later triggers
BUG_ON(order > mm->max_order).
Example scenarios:
- 9G CONTIGUOUS allocation on 10G VRAM memory:
roundup_pow_of_two(9G) = 16G > 10G
- 9G allocation with 8G min_block_size on 10G VRAM memory:
round_up(9G, 8G) = 16G > 10G
Fix this by checking the rounded size against mm->size. For
non-contiguous or range allocations where size > mm->size is invalid,
return -EINVAL immediately. For contiguous allocations without range
restrictions, allow the request to fall through to the existing
__alloc_contig_try_harder() fallback.
This ensures invalid user input returns an error or uses the fallback
path instead of hitting BUG_ON.
v2: (Matt A)
- Add Fixes, Cc stable, and Closes tags for context
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6712
Fixes: 0a1844bf0b ("drm/buddy: Improve contiguous memory allocation")
Cc: <stable@vger.kernel.org> # v6.7+
Cc: Christian König <christian.koenig@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260108113227.2101872-5-sanjay.kumar.yadav@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1aa1dd9cc5 ]
charge_reserved_hugetlb.sh mounts a hugetlbfs instance at /mnt/huge with a
fixed size of 256M. On systems with large base hugepages (e.g. 512MB),
this is smaller than a single hugepage, so the hugetlbfs mount ends up
with zero capacity (often visible as size=0 in mount output).
As a result, write_to_hugetlbfs fails with ENOMEM and the test can hang
waiting for progress.
=== Error log ===
# uname -r
6.12.0-xxx.el10.aarch64+64k
#./charge_reserved_hugetlb.sh -cgroup-v2
# -----------------------------------------
...
# nr hugepages = 10
# writing cgroup limit: 5368709120
# writing reseravation limit: 5368709120
...
# write_to_hugetlbfs: Error mapping the file: Cannot allocate memory
# Waiting for hugetlb memory reservation to reach size 2684354560.
# 0
# Waiting for hugetlb memory reservation to reach size 2684354560.
# 0
...
# mount |grep /mnt/huge
none on /mnt/huge type hugetlbfs (rw,relatime,seclabel,pagesize=512M,size=0)
# grep -i huge /proc/meminfo
...
HugePages_Total: 10
HugePages_Free: 10
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 524288 kB
Hugetlb: 5242880 kB
Drop the mount args with 'size=256M', so the filesystem capacity is sufficient
regardless of HugeTLB page size.
Link: https://lkml.kernel.org/r/20251221122639.3168038-3-liwang@redhat.com
Fixes: 29750f71a9 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: Li Wang <liwang@redhat.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c9828d3ea ]
Since commit cc638f329e ("mm, thp: tweak reclaim/compaction effort of
local-only and all-node allocations"), THP page fault allocations have
settled on the following scheme (from the commit log):
1. local node only THP allocation with no reclaim, just compaction.
2. for madvised VMA's or when synchronous compaction is enabled always - THP
allocation from any node with effort determined by global defrag setting
and VMA madvise
3. fallback to base pages on any node
Recent customer reports however revealed we have a gap in step 1 above.
What we have seen is excessive reclaim due to THP page faults on a NUMA
node that's close to its high watermark, while other nodes have plenty of
free memory.
The problem with step 1 is that it promises no reclaim after the
compaction attempt, however reclaim is only avoided for certain compaction
outcomes (deferred, or skipped due to insufficient free base pages), and
not e.g. when compaction is actually performed but fails (we did see
compact_fail vmstat counter increasing).
THP page faults can therefore exhibit a zone_reclaim_mode-like behavior,
which is not the intention.
Thus add a check for __GFP_THISNODE that corresponds to this exact
situation and prevents continuing with reclaim/compaction once the initial
compaction attempt isn't successful in allocating the page.
Note that commit cc638f329e has not introduced this over-reclaim
possibility; it appears to exist in some form since commit 2f0799a0ff
("mm, thp: restore node-local hugepage allocations"). Followup commits
b39d0ee263 ("mm, page_alloc: avoid expensive reclaim when compaction may
not succeed") and cc638f329e have moved in the right direction, but left
the abovementioned gap.
Link: https://lkml.kernel.org/r/20251219-costly-noretry-thisnode-fix-v1-1-e1085a4a0c34@suse.cz
Fixes: 2f0799a0ff ("mm, thp: restore node-local hugepage allocations")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: "David Hildenbrand (Red Hat)" <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 802774d853 ]
The glibc library limits the return code to 8 bits. We need to
stick to this limit when using sys.exit(error_count).
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <233d1674db99ed8feb405a2f781de350f0fba0ac.1768823489.git.mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c73cfd0cf ]
During normal playback, stream-on for input is followed by output, and
only after input stream-on does actual streaming begin. However, when
gst-play performs a seek, both input and output streams are stopped,
and on restart, output stream-on occurs first. At this point, firmware
has not yet started streaming. Queuing output buffers before the firmware
begins streaming causes it to process buffers in an invalid state, leading
to an error response. These buffers are returned to the driver as errors,
forcing the driver into an error state and stopping playback.
Fix this by deferring output buffer queuing until stream-on completes.
Input buffers can still be queued before stream-on as required.
Fixes: 92e007ca5a ("media: iris: Add V4L2 streaming support for encoder video device")
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aa8d63d09 ]
In iris_kill_session, inst->state is set to IRIS_INST_ERROR and
session_close is executed, which will kfree(inst_hfi_gen2->packet).
If stop_streaming is called afterward, it will cause a crash.
Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet
to firmware to fix that.
Fixes: 11712ce70f ("media: iris: implement vb2 streaming ops")
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dabf00ee2 ]
After the firmware releases internal buffers, the driver was not
destroying them. This left stale allocations that were no longer used,
especially across resolution changes where new buffers are allocated per
the updated requirements. As a result, memory was wasted until session
close.
Destroy internal buffers once the release response is received from the
firmware.
Fixes: 73702f45db ("media: iris: allocate, initialize and queue internal buffers")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 811dbc546f ]
The resolution property is not supposed to be set during reconfig.
Existing iris_drc_pending(inst) check is insufficient, as it doesn't
cover the first port setting change.
Extend the conditional check to also skip resolution setting when
the instance is in IRIS_INST_SUB_FIRST_IPSC.
Fixes: caf2055487 ("media: iris: Avoid updating frame size to firmware during reconfig")
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d0bbd982d ]
Move `list_add_tail()` to after `dma_alloc_attrs()` succeeds when creating
internal buffers. Previously, the buffer was enqueued in `buffers->list`
before the DMA allocation. If the allocation failed, the function returned
`-ENOMEM` while leaving a partially initialized buffer in the list, which
could lead to inconsistent state and potential leaks.
By adding the buffer to the list only after `dma_alloc_attrs()` succeeds,
we ensure the list contains only valid, fully initialized buffers.
Fixes: 73702f45db ("media: iris: allocate, initialize and queue internal buffers")
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4980721cb9 ]
According to 4.5.1.5 of the M2M stateful decoder UAPI documentation,
providing the width and the height to S_FMT is "required only if it
cannot be parsed from the stream", otherwise they can be left as 0
and the S_FMT implementation is expected to return a valid placeholder
resolution that would let REQBUFS succeed.
iris was missing the fallback, so clients like rpi-ffmpeg wouldn't work.
Fix by adding an explicit fallback to defaults.
Fixes: b530b95de2 ("media: iris: implement s_fmt, g_fmt and try_fmt ioctls")
Link: https://github.com/jc-kynesim/rpi-ffmpeg/issues/103
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71fe80364a ]
iris_venc_s_param() uses do_div to divide two 64 bits operators, this is
wrong. Luckily for us, both of the operators fit in 32 bits, so we can use
a normal division.
Now that we are at it, mark the fps smaller than 1 as invalid, the code
does not seem to handle them properly.
The following cocci warning is fixed with this patch:
./platform/qcom/iris/iris_venc.c:378:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead
Fixes: 4ff586ff28 ("media: iris: Add support for G/S_PARM for encoder video device")
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89f7cf3590 ]
When the ffmpeg decoder is running, the driver receives the
V4L2_BUF_FLAG_KEYFRAME flag in the input buffer. The driver then forwards
this flag information to the firmware. The firmware, in turn, copies the
input buffer flags directly into the output buffer flags. Upon receiving
the output buffer from the firmware, the driver observes that the buffer
contains the HFI_BUFFERFLAG_DATACORRUPT flag. The root cause is that both
V4L2_BUF_FLAG_KEYFRAME and HFI_BUFFERFLAG_DATACORRUPT are the same value.
As a result, the driver incorrectly interprets the output frame as
corrupted, even though the frame is actually valid. This misinterpretation
causes the driver to report an error and skip good frames, leading to
missing frames in the final video output and triggering ffmpeg's "corrupt
decoded frame" error.
To resolve this issue, the input buffer flags should not be sent to the
firmware during decoding, since the firmware does not require this
information.
Fixes: 17f2a485ca ("media: iris: implement vb2 ops for buf_queue and firmware response")
Cc: stable@vger.kernel.org
Signed-off-by: Vishnu Reddy <quic_bvisredd@quicinc.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 370e19042f ]
This reverts commit ad699fa78b.
Revert the check that skipped stop_streaming when the instance was in
IRIS_INST_ERROR, as it caused multiple regressions:
1. Buffers were not returned to vb2 when the instance was already in
error state, triggering warnings in the vb2 core because buffer
completion was skipped.
2. If a session failed early (e.g. unsupported configuration), the
instance transitioned to IRIS_INST_ERROR. When userspace attempted
to stop streaming for cleanup, stop_streaming was skipped due to the
added check, preventing proper teardown and leaving the firmware
in an inconsistent state.
Fixes: ad699fa78b ("media: iris: Add sanity check for stop streaming")
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63c072e293 ]
On SM8250 (IRIS2) with firmware older than 1.0.087, the firmware could
not handle a dummy device address for EOS buffers, so a NULL device
address is sent instead. The existing check used IS_V6() alongside a
firmware version gate:
if (IS_V6(core) && is_fw_rev_or_older(core, 1, 0, 87))
fdata.device_addr = 0;
else
fdata.device_addr = 0xdeadb000;
However, SC7280 which is also V6, uses a firmware string of the form
"1.0.<commit-hash>", which the version parser translates to 1.0.0. This
unintentionally satisfies the `is_fw_rev_or_older(..., 1, 0, 87)`
condition on SC7280. Combined with IS_V6() matching there as well, the
quirk is incorrectly applied to SC7280, causing VP9 decode failures.
Constrain the check to IRIS2 (SM8250) only, which is the only platform
that needed this quirk, by replacing IS_V6() with IS_IRIS2(). This
restores correct behavior on SC7280 (no forced NULL EOS buffer address).
Fixes: 47f867cb1b ("media: venus: fix EOS handling in decoder stop command")
Cc: stable@vger.kernel.org
Reported-by: Mecid <mecid@mecomediagroup.de>
Closes: https://github.com/qualcomm-linux/kernel-topics/issues/222
Co-developed-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93ecd6ee95 ]
When hfi_session_flush is issued, all queued buffers are returned to
the V4L2 driver. Some of these buffers are not processed and have
bytesused = 0. Currently, the driver marks such buffers as error even
during drain operations, which can incorrectly flag EOS buffers.
Only capture buffers with zero payload (and not EOS) should be marked
with VB2_BUF_STATE_ERROR. The check is performed inside the non-EOS
branch to ensure correct handling.
Fixes: 51df3c81ba ("media: venus: vdec: Mark flushed buffers with error state")
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a380a02ea3 ]
When switching to regmap, the i2c_client pointer was removed from struct
pcf8563 so this function switched to using the RTC device instead. But
the RTC device is a child of the original I2C device and does not have
an associated of_node.
Reference the correct device's of_node to ensure that the output clock
can be found when referenced by other devices and so that the override
clock name is read correctly.
Cc: stable@vger.kernel.org
Fixes: 00f1bb9b84 ("rtc: pcf8563: Switch to regmap")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://patch.msgid.link/20260108184749.3413348-1-jkeeping@inmusicbrands.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83c10e8dd4 ]
The "unstriped" device-mapper target incorrectly calculates the sector
offset on the mapped device when the target's origin is not zero.
Take for example this hypothetical concatenation of the members of a
two-disk RAID0:
linearized: 0 2097152 unstriped 2 128 0 /dev/md/raid0 0
linearized: 2097152 2097152 unstriped 2 128 1 /dev/md/raid0 0
The intent in this example is to create a single device named
/dev/mapper/linearized that comprises all of the chunks of the first disk
of the RAID0 set, followed by all of the chunks of the second disk of the
RAID0 set.
This fails because dm-unstripe.c's map_to_core function does its
computations based on the sector number within the mapper device rather
than the sector number within the target. The bug turns invisible when
the target's origin is at sector zero of the mapper device, as is the
common case. In the example above, however, what happens is that the
first half of the mapper device gets mapped correctly to the first disk
of the RAID0, but the second half of the mapper device gets mapped past
the end of the RAID0 device, and accesses to any of those sectors return
errors.
Signed-off-by: Matt Whitlock <kernel@mattwhitlock.name>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 18a5bf2705 ("dm: add unstriped target")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 118ba36e44 ]
There's a logic quirk in the handling of suspend in the bitmap mode:
This is the sequence of calls if we are reloading a dm-integrity table:
* dm_integrity_ctr reads a superblock with the flag SB_FLAG_DIRTY_BITMAP
set.
* dm_integrity_postsuspend initializes a journal and clears the flag
SB_FLAG_DIRTY_BITMAP.
* dm_integrity_resume sees the superblock with SB_FLAG_DIRTY_BITMAP set -
thus it interprets the journal as if it were a bitmap.
This quirk causes recalculation problem if the user increases the size of
the device in the bitmap mode.
Fix this by reading a fresh copy on the superblock in
dm_integrity_resume. This commit also fixes another logic quirk - the
branch that sets bitmap bits if the device was extended should only be
executed if the flag SB_FLAG_DIRTY_BITMAP is set.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Ondrej Kozina <okozina@redhat.com>
Fixes: 468dfca38b ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16de4c6a8f ]
This is a special device that's created dynamically and is supposed to
stay in memory forever. We also currently don't have a devlink between
it and the actual reset consumer. Suppress sysfs bind attributes so that
user-space can't unbind the device because - as of now - it will cause a
use-after-free splat from any user that puts the reset control handle.
Fixes: cee544a40e ("reset: gpio: Add GPIO-based reset controller")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69f83f1674 ]
With some panels informing support for Panel Replay we are observing
problems if having Panel Replay enable bit set on sink when forced to use
PSR instead of Panel Replay. Avoid these problems by not setting Panel
Replay enable bit in sink when Panel Replay is globally disabled during
link training. I.e. disabled by module parameter.
The enable bit is still set when disabling Panel Replay via debugfs
interface. Added note comment about this.
Fixes: 68f3a505b3 ("drm/i915/psr: Enable Panel Replay on sink always when it's supported")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20260115070039.368965-1-jouni.hogander@intel.com
(cherry picked from commit c5a52cd04e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcd7f96c78 ]
Although it is guided that `#mbox-cells` must be at least 1, there are
many instances of `#mbox-cells = <0>;` in the device tree. If that is
the case and the corresponding mailbox controller does not provide
`fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will
be used by default and out-of-bounds accesses could occur due to lack of
bounds check in that function.
Cc: stable@vger.kernel.org
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84d875e698 ]
On s390 PCI busses and slots with multiple functions may have holes
because PCI functions are passed-through by the hypervisor on a per
function basis and some functions may be in standby or reserved. This
fact is indicated by returning true from the
hypervisor_isolated_pci_functions() helper and triggers common code to
scan all possible devfn values. Via pci_scan_single_device() this in
turn causes config reads for the device and vendor IDs, even for PCI
functions which are in standby and thereofore disabled.
So far these futile config reads, as well as potentially writes, which
can never succeed were handled by the PCI load/store instructions
themselves. This works as the platform just returns an error for
a disabled and thus not usable function handle. It does cause spamming
of error logs and additional overhead though.
Instead check if the used function handle is enabled in zpci_cfg_load()
and zpci_cfg_write() and if not enable directly return -ENODEV. Also
refactor zpci_cfg_load() and zpci_cfg_store() slightly to accommodate
the new logic while meeting modern kernel style guidelines.
Cc: stable@vger.kernel.org
Fixes: a50297cf82 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7226664bf9 ]
When runtime suspend is enabled, the associated power domain is powered
off, which resets the registers, including the power control bit. As a result,
the card loses power during runtime suspend. The card should still be able
to process I/O with the help of mmc_blk_mq_rw_recovery(), which is suboptimal.
To address this issue, we must use vmmc-supply with a GPIO based method to
maintain power to the card. Also, add cd-gpios method to make hot-plug work
correctly during idle periods.
Fixes: f135a1a073 ("arm64: dts: rockchip: Add rk3576 evb1 board")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1768524932-163929-5-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91848c99ed ]
Digital gain wraps-around at the maximum of 16838 / 0x3fff.
Fix the maximum digital gain by setting it to 0x3fff.
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3363aa2640 ]
Avoid possibility to perform compose on all frames which mbus code is
within the bayer range or jpeg format.
Fixes: 822c72eb15 ("media: stm32: dcmipp: add bayer 10~14 bits formats")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 222f1279ed ]
Ensure that there are no pending interrupts after we have stopped the
pipeline. Indeed, it could happen that new interrupt has been generated
during the stop_streaming processing hence clear them in order to avoid
getting a new interrupt right from the start of a next start_streaming.
Fixes: 28e0f37722 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f130245f2 ]
When DCMIPP requires only a single clock (kclk), avoid relying on its
name to obtain it. The introduction of MP25 support added the mclk,
which necessitated naming the first clock kclk. However, this breaks
backward compatibility with existing MP13 device trees that do not
specify clock names.
Fixes: 686f27f7ea ("media: stm32: dcmipp: add core support for the stm32mp25")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Cc: Stable@vger.kernel.org # 6.14.x: 7f487562af49 media: stm32: dcmipp: correct ret type in dcmipp_graph_notify_bound
Cc: Stable@vger.kernel.org # 6.14.x: c715dd62da30 media: stm32: dcmipp: add has_csi2 & needs_mclk in match data
Cc: Stable@vger.kernel.org # 6.14.x:
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75fb63ae03 ]
Currently, only the first matched node will be handled. This leads
to jtag switching broken for RK3576, as rk3576-sys-grf is found before
rk3576-ioc-grf. Change the code to scan all the possible node to fix
the problem.
Fixes: e1aaecacfa ("soc: rockchip: grf: Add rk3576 default GRF values")
Cc: stable@vger.kernel.org
Cc: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Marco Schirrmeister <mschirrmeister@gmail.com>
Link: https://patch.msgid.link/1768524932-163929-3-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef9b3b4dbe ]
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,nco" anymore [1]. Use
"apple,t8103-nco" as base compatible as it is the SoC the driver and
bindings were written for.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Fixes: 6641057d5d ("clk: clk-apple-nco: Add driver for Apple NCO")
Cc: stable@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eb63e9bb6 ]
Since commit c6e126de43 ("of: Keep track of populated platform
devices") child devices will not be created by of_platform_populate()
if the devices had previously been deregistered individually so that the
OF_POPULATED flag is still set in the corresponding OF nodes.
Switch to using of_platform_depopulate() instead of open coding so that
the child devices are created if the driver is rebound.
Fixes: c6e126de43 ("of: Keep track of populated platform devices")
Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251219110119.23507-1-johan@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 127ccae2c1 ]
Commit cc3ed80ae6 ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB.
Fixes: cc3ed80ae6 ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260110004821.3411245-2-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80db65d4ac ]
In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly
calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np)
on the error path. However, after the devm_add_action_or_reset()
returns, the of_node_put(clk_mux_np) is called again, causing a double
free.
Fix by returning directly, to avoid the duplicate of_node_put().
Fixes: ba59c9b43c ("soc: ti: pruss: support CORECLK_MUX and IEPCLK_MUX")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260113014716.2464741-1-vulab@iscas.ac.cn
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c933138d45 ]
The mmio regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: a5caf03188 ("soc: ti: k3-socinfo: Do not use syscon helper to build regmap")
Cc: stable@vger.kernel.org # 6.15
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20251127134942.2121-1-johan@kernel.org
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb8a6c18fb ]
Stale rq->bio values have been observed to cause double-initialization of
cloned bios in request-based device-mapper targets, leading to
use-after-free and double-free scenarios.
One such case occurs when using dm-multipath on top of a PCIe NVMe
namespace, where cloned request bios are freed during
blk_complete_request(), but rq->bio is left intact. Subsequent clone
teardown then attempts to free the same bios again via
blk_rq_unprep_clone().
The resulting double-free path looks like:
nvme_pci_complete_batch()
nvme_complete_batch()
blk_mq_end_request_batch()
blk_complete_request() // called on a DM clone request
bio_endio() // first free of all clone bios
...
rq->end_io() // end_clone_request()
dm_complete_request(tio->orig)
dm_softirq_done()
dm_done()
dm_end_request()
blk_rq_unprep_clone() // second free of clone bios
Fix this by clearing the clone request's bio pointer when the last cloned
bio completes, ensuring that later teardown paths do not attempt to free
already-released bios.
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c698b7f417 ]
If we send a write followed by a discard, it may be possible that the
discarded data end up being overwritten by the previous write from the
journal. The code tries to prevent that, but there was a typo in this
logic that made it not being activated as it should be.
Note that if we end up here the second time (when discard_retried is
true), it means that the write bio is actually racing with the discard
bio, and in this situation it is not specified which of them should win.
Cc: stable@vger.kernel.org
Fixes: 31843edab7 ("dm integrity: improve discard in journal mode")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc7901b5a1 ]
The suspend/resume callbacks currently only store and restore the
configuration for power domain 0. However, other power domains may also
have modified configurations that need to be preserved across suspend/
resume cycles.
Extend the store/restore functionality to handle all power domains.
Fixes: 91576acab0 ("platform/x86: ISST: Add suspend/resume callbacks")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20260107060256.1634188-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98cc19a353 ]
This patch fixes the incorrect loop bound in alloc_l2_pt(). When
initializing L2 page table entries, the loop was incorrectly using
ISP_L1PT_PTES instead of ISP_L2PT_PTES though the ISP_L1PT_PTES is
equal to ISP_L2PT_PTES.
Fixes: 71d81c2568 ("media: staging/ipu7: add IPU7 DMA APIs and MMU mapping")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7923e6baf ]
Some CPHY settings needs to updated according to the latest guide from
SNPS. This patch program 45ohm for tuning resistance to fix CPHY problem
and update the ITMINRX and GMODE for CPHY.
Cc: Stable@vger.kernel.org
Fixes: a516d36bdc ("media: staging/ipu7: add IPU7 input system device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1433e6ccc2 ]
If firmware authentication failed during driver probe, driver call an
asynchronous API to suspend the psys device but the bus device will be
removed soon, thus runtime PM of bus device will be disabled soon, that
will cancel the suspend request, so use synchronous suspend to make
sure the runtime suspend before disabling its RPM.
IPU7 hardware has constraints that the PSYS device must be powered off
before ISYS, otherwise it will cause machine check error.
Cc: Stable@vger.kernel.org
Fixes: b7fe4c0019 ("media: staging/ipu7: add Intel IPU7 PCI device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ad65684b9 ]
IPU7 devices have shared interrupts with others. In some case when IPU7
device is suspended, driver get unexpected interrupt and invalid irq
status 0xffffffff from ISR_STATUS and PB LOCAL_STATUS registers as
interrupt is triggered from other device on shared irq line.
In order to avoid this issue use pm_runtime_get_if_active() to check if
IPU7 device is resumed, ignore the invalid irq status and use
synchronize_irq() in suspend.
Cc: Stable@vger.kernel.org
Fixes: b7fe4c0019 ("media: staging/ipu7: add Intel IPU7 PCI device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6099f78e4c ]
Several error paths in ipu6_pci_probe() were jumping directly to
out_ipu6_bus_del_devices without releasing the runtime PM reference.
Add pm_runtime_put_sync() before cleaning up other resources.
Cc: Stable@vger.kernel.org
Fixes: 25fedc0219 ("media: intel/ipu6: add Intel IPU6 PCI device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e0fcc9127 ]
Fix two coding errors in ipu6-mmu.c:
1. Fix syntax error in page_table_dump() where the closing parenthesis
and semicolon were swapped in the TBL_PHYS_ADDR macro call.
2. Fix incorrect loop bound in alloc_l2_pt(). When initializing L2 page
table entries, the loop was incorrectly using ISP_L1PT_PTES instead
of ISP_L2PT_PTES.
Fixes: 9163d83573 ("media: intel/ipu6: add IPU6 DMA mapping API and MMU table")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 401aec35ac ]
We have experienced seen multiple I2C errors while doing stress test on
the module:
dw9714 i2c-PRP0001:01: dw9714_vcm_resume I2C failure: -5
dw9714 i2c-PRP0001:01: I2C write fail
Inspecting the powerup sequence we found that it does not match the
documentation at:
https://blog.arducam.com/downloads/DW9714A-DONGWOON(Autofocus_motor_manual).pdf
"""
(2) DW9714A requires waiting time of 12ms after power on. During this
waiting time, the offset calibration of internal amplifier is
operating for minimization of output offset current .
"""
This patch increases the powerup delay to follow the documentation.
Fixes: 9d00ccabfb ("media: i2c: dw9714: Fix occasional probe errors")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Tested-by: Neil Sun <neil.sun@lcfuturecenter.com>
Reported-by: Naomi Huang <naomi.huang@lcfuturecenter.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 973e42fd5d ]
__v4l2_ctrl_handler_setup() and __v4l2_ctrl_modify_range() contains an
assertion to verify that the v4l2_ctrl_handler::lock is held, as it should
only be called when the lock has already been acquired. Therefore use our
own mutex for the ctrl lock, otherwise a warning will be reported.
Fixes: 4974c2f19f ("media: ov5647: Support gain, exposure and AWB controls")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
[Sakari Ailus: Fix a minor conflict.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
