Asserting the NOCSR reset line keeps the PHY registers in tact.
This allows us to avoid programming long tables of magic values in the
operating system.
Wire up these resets to PCIe PHY4 and 5 (it's there on the others).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203-topic-x1p4_dts-v2-4-72cd4cdc767b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ5332 has tsens v2.3.3 peripheral. This patch adds the tsens
node with nvmem cells for calibration data.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-4-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add LDOA2 regulator from MP5496 to support SDCC voltage scaling.
Suggested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250210070122.208842-6-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Change the labels of mp5496 regulator from ipq6018 to mp5496.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250210070122.208842-5-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some IPQ60xx SoCs don't come with the mp5496 pmic chip. The mp5496
pmic was never part of the IPQ60xx SoC, it's optional, so we moved
it out of the soc dtsi.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250210070122.208842-4-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The early version of IPQ6000 (SoC id: IPQ6018, SBL version:
BOOT.XF.0.3-00077-IPQ60xxLZB-2) and IPQ6005 SoCs can reach
a max frequency of 1.5GHz, so add this CPU frequency.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20250210070122.208842-3-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The final version of IPQ6000 (SoC id: IPQ6000, SBL version:
BOOT.XF.0.3-00086-IPQ60xxLZB-1) has a max design frequency
of 1.2GHz, so add this CPU frequency.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250210070122.208842-2-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The sa8775p-ride platform uses the QCA6698 Bluetooth chip. While the
QCA6698 shares the same IP core as the WCN6855, it has different RF
components and RAM sizes, requiring new firmware files. Use the
firmware-name property to specify the NVM and rampatch firmware to load.
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250110063914.28001-2-quic_chejiang@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Make this USB controller consistent with the others on this platform.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250109205232.92336-1-kettenis@openbsd.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable SLPI, sensors DSP, on the Qualcomm Robotics RB5 platform. The
firmware for the DSP is a part of linux-firmware repository.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250222-rb3-rb5-slpi-v1-2-6739be1684b6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable SLPI, sensors DSP, on the Qualcomm Robotics RB3 platform. The
firmware for the DSP is a part of linux-firmware repository.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250222-rb3-rb5-slpi-v1-1-6739be1684b6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable PMIC and PMIC peripherals for qcs8300-ride board. The qcs8
300-ride uses 2 pmics(pmm8620au:0,pmm8650au:1) on the board, which
are variants of pmm8654au used on sa8775p/qcs9100 -ride(4x pmics).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Link: https://lore.kernel.org/r/20250108-adds-spmi-pmic-peripherals-for-qcs8300-v3-2-ee94642279ff@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the PMU node for WCN6750 present on the qcs6490-rb3gen2
board and assign its power outputs to the Bluetooth module.
In WCN6750 module sw_ctrl and wifi-enable pins are handled
in the wifi controller firmware. Therefore, it is not required
to have those pins' entries in the PMU node.
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250221171014.120946-2-quic_janathot@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the OPP tables for each CPU clusters (cpu0-1, cpu2-3-4, cpu5-6 & cpu7)
to permit scaling the Last Level Cache Controller (LLCC), DDR and L3 cache
frequency by aggregating bandwidth requests of all CPU core with referenc
to the current OPP they are configured in by the LMH/EPSS hardware.
The effect is a proper caches & DDR frequency scaling when CPU cores
changes frequency.
The OPP tables were built using the downstream memlat ddr, llcc & l3
tables for each cluster types with the actual EPSS cpufreq LUT tables
from running HDK and QRD devices.
The cpu2 and cpu5 tables are similar but must be kept separate to
take in account that they define OPP for shared CPUs of two different
clusters that can scale separately, thus vote different bandwidths.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250211-topic-sm8650-ddr-bw-scaling-v2-3-a0c950540e68@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the interconnect entry for each cpu, with 3 different paths:
- CPU to Last Level Cache Controller (LLCC)
- Last Level Cache Controller (LLCC) to DDR
- L3 Cache from CPU to DDR interface
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250211-topic-sm8650-ddr-bw-scaling-v2-2-a0c950540e68@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X Elite implements Server Base System Architecture (SBSA) specification
compliant generic watchdog.
Describe it.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250212-x1e80100-add-watchdog-v2-1-a73897f0dad5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for vadc and adc-tm channels which are used for
monitoring thermistors present on the platform.
- Add the necessary includes for qcom,spmi-adc7-pm7325 and
qcom,spmi-adc7-pmk8350.
- Add thermal zones for quiet-thermal, sdm-skin-thermal, and
xo-thermal, and define their polling delays and thermal sensors.
- Configure the pm7325_temp_alarm node to use the pmk8350_vadc
channel for thermal monitoring.
- Configure the pmk8350_adc_tm node to enable its thermal sensors
and define their registers and settings.
- Configure the pmk8350_vadc node to define its channels and settings
Signed-off-by: Rakesh Kota <quic_kotarake@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212113342.873086-1-quic_kotarake@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are 4 Qualcomm PMIC Die Temp Alarm Sensor Devices under windows os,
in separate dt files, pm8350c and pmr735a have already support temp alarm,
add the rest 2 devices for sc8280xp-pmic.
Temperature trip points are from dsdt(Temp. in tenths of degrees Kelvin).
example:
Name (TPSV, 0x0E60) // 0x0E60 - 2730 = 950
Method (_PSV, 0, NotSerialized) // _PSV: Passive Temperature
{
Return (\_SB.TZ15.TPSV)
}
Name (TCRT, 0x0F28) // 0X0F28 - 2730 = 1150
Method (_CRT, 0, NotSerialized) // _CRT: Critical Temperature
{
Return (\_SB.TZ15.TCRT)
}
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250111083209.262269-2-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
According to the binding for qcom,spmi-pmic-arb, the cell 1 should be
slave id, the slave id of pmc8280_2 is 3.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250111083209.262269-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no use wasting power on keeping the links between the CPU and
something else online when the CPUs are online. Change the interconnect
tag for such paths, so that RPMh is requested to automatically
clock-gate those when possible.
Keeping these paths online is also a potential power collapse blocker,
however this commit alone doesn't magically fix all the remaining
TODOs related to suspend.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250111-topic-x1e_fixups-v1-2-77dc39237c12@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- sh: boards: Use imply to enable hardware with complex dependencies
- sh: Migrate to the generic rule for built-in DTB
- sh: irq: Use seq_put_decimal_ull_width() for decimal values
-----BEGIN PGP SIGNATURE-----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=G6GL
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
13 are for MM and 8 are for non-MM. All are singletons, please see the
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ54MEgAKCRDdBJ7gKXxA
jlhdAP0evTQ9JX+22DDWSVdWFBbnQ74c5ddFXVQc1LO2G2FhFgD+OXhH8E65Nez5
qGWjb4xgjoQTHS7AL4pYEFYqx/cpbAQ=
=rN+l
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 8 are cc:stable and the remainder address post-6.13
issues. 13 are for MM and 8 are for non-MM.
All are singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
MAINTAINERS: include linux-mm for xarray maintenance
revert "xarray: port tests to kunit"
MAINTAINERS: add lib/test_xarray.c
mailmap, MAINTAINERS, docs: update Carlos's email address
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
mm: gup: fix infinite loop within __get_longterm_locked
mm, swap: fix reclaim offset calculation error during allocation
.mailmap: update email address for Christopher Obbard
kfence: skip __GFP_THISNODE allocations on NUMA systems
nilfs2: fix possible int overflows in nilfs_fiemap()
mm: compaction: use the proper flag to determine watermarks
kernel: be more careful about dup_mmap() failures and uprobe registering
mm/fake-numa: handle cases with no SRAT info
mm: kmemleak: fix upper boundary check for physical address objects
mailmap: add an entry for Hamza Mahfooz
MAINTAINERS: mailmap: update Yosry Ahmed's email address
scripts/gdb: fix aarch64 userspace detection in get_current_task
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
ocfs2: fix incorrect CPU endianness conversion causing mount failure
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
...
Revert c7bb5cf9fc ("xarray: port tests to kunit"). It broke the build
when compiing the xarray userspace test harness code.
Reported-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Closes: https://lkml.kernel.org/r/07cf896e-adf8-414f-a629-a808fc26014a@oracle.com
Cc: David Gow <davidgow@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tamir Duberstein <tamird@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If CONFIG_I2C=n:
WARNING: unmet direct dependencies detected for SND_SOC_AK4642
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && I2C [=n]
Selected by [y]:
- SH_7724_SOLUTION_ENGINE [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
WARNING: unmet direct dependencies detected for SND_SOC_DA7210
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=n]
Selected by [y]:
- SH_ECOVEC [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
Fix this by replacing select by imply, instead of adding a dependency on
I2C.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240836.OvXqmANX-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Commit 654102df2a ("kbuild: add generic support for built-in
boot DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_USE_BUILTIN_DTB to CONFIG_BUILTIN_DTB, and
CONFIG_BUILTIN_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which has significant costs
parsing format string and is less efficient than seq_put_decimal_ull_width().
Stress reading /proc/interrupts indicates ~30% performance improvement with
this patch.
Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
* The PH1520 pinctrl and dwmac drivers are enabeled in defconfig.
* A redundant AQRL barrier has been removed from the futex cmpxchg
implementation.
* Support for the T-Head vector extensions, which includes exposing
these extensions to userspace on systems that implement them.
* Some more page table information is now printed on die() and systems
that cause PA overflows.
-----BEGIN PGP SIGNATURE-----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=HbAQ
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The PH1520 pinctrl and dwmac drivers are enabeled in defconfig
- A redundant AQRL barrier has been removed from the futex cmpxchg
implementation
- Support for the T-Head vector extensions, which includes exposing
these extensions to userspace on systems that implement them
- Some more page table information is now printed on die() and systems
that cause PA overflows
* tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add a warning when physical memory address overflows
riscv/mm/fault: add show_pte() before die()
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
RISC-V: Mark riscv_v_init() as __init
riscv: defconfig: drop RT_GROUP_SCHED=y
riscv/futex: Optimize atomic cmpxchg
riscv: defconfig: enable pinctrl and dwmac support for TH1520
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
-----BEGIN PGP SIGNATURE-----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=D553
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
* tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits)
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
kbuild: Strip runtime const RELA sections correctly
kconfig: fix memory leak in sym_warn_unmet_dep()
kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST
genksyms: fix syntax error for attribute before init-declarator
genksyms: fix syntax error for builtin (u)int*x*_t types
genksyms: fix syntax error for attribute after 'union'
genksyms: fix syntax error for attribute after 'struct'
genksyms: fix syntax error for attribute after abstact_declarator
genksyms: fix syntax error for attribute before nested_declarator
genksyms: fix syntax error for attribute before abstract_declarator
genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier
genksyms: record attributes consistently for init-declarator
genksyms: restrict direct-declarator to take one parameter-type-list
genksyms: restrict direct-abstract-declarator to take one parameter-type-list
genksyms: remove Makefile hack
genksyms: fix last 3 shift/reduce conflicts
genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts
genksyms: reduce type_qualifier directly to decl_specifier
genksyms: rename cvar_qualifier to type_qualifier
...
Due to the fact that runtime const ELF sections are named without a
leading period or double underscore, the RSTRIP logic that removes the
static RELA sections from vmlinux fails to identify them. This results
in a situation like below, where some sections that were supposed to get
removed are left behind.
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[58] runtime_shift_d_hash_shift PROGBITS ffffffff83500f50 2900f50 000014 00 A 0 0 1
[59] .relaruntime_shift_d_hash_shift RELA 0000000000000000 55b6f00 000078 18 I 70 58 8
[60] runtime_ptr_dentry_hashtable PROGBITS ffffffff83500f68 2900f68 000014 00 A 0 0 1
[61] .relaruntime_ptr_dentry_hashtable RELA 0000000000000000 55b6f78 000078 18 I 70 60 8
[62] runtime_ptr_USER_PTR_MAX PROGBITS ffffffff83500f80 2900f80 000238 00 A 0 0 1
[63] .relaruntime_ptr_USER_PTR_MAX RELA 0000000000000000 55b6ff0 000d50 18 I 70 62 8
So tweak the match expression to strip all sections starting with .rel.
While at it, consolidate the logic used by RISC-V, s390 and x86 into a
single shared Makefile library command.
Link: https://lore.kernel.org/all/CAHk-=wjk3ynjomNvFN8jf9A1k=qSc=JFF591W00uXj-qqNUxPQ@mail.gmail.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- The biggest changes are the TLB flushing scalability optimizations,
to update the mm_cpumask lazily and related changes. This feature
has both a track record and a continued risk of performance regressions,
so it was already delayed by a cycle - but it's all 100% perfect now™.
(Rik van Riel)
- Also miscellaneous fixes and cleanups. (Gautam Somani,
Kirill A. Shutemov, Sebastian Andrzej Siewior)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=g00u
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2025-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
- The biggest changes are the TLB flushing scalability optimizations,
to update the mm_cpumask lazily and related changes.
This feature has both a track record and a continued risk of
performance regressions, so it was already delayed by a cycle - but
it's all 100% perfect now™ (Rik van Riel)
- Also miscellaneous fixes and cleanups. (Gautam Somani, Kirill
Shutemov, Sebastian Andrzej Siewior)
* tag 'x86-mm-2025-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove unnecessary include of <linux/extable.h>
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
x86/mm/selftests: Fix typo in lam.c
x86/mm/tlb: Only trim the mm_cpumask once a second
x86/mm/tlb: Also remove local CPU from mm_cpumask if stale
x86/mm/tlb: Add tracepoint for TLB flush IPI to stale CPU
x86/mm/tlb: Update mm_cpumask lazily
This reverts commit bc7584e009.
The split IPC system calls for o32 have been introduced with modern
version only. Changing this breaks ABI.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
die executes holding the spinlock of &die.lock and unlock
it after printing the oops message.
However in the code if the notify_die() returns NOTIFY_STOP
, die() exit with returning 1 but never unlocked the spinlock.
Fix this by adding spin_unlock_irq(&die.lock) before returning.
Fixes: cf9750bae2 ("Hexagon: Provide basic debugging and system trap support.")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Link: https://lore.kernel.org/r/20230522025608.2515558-1-linyujun809@huawei.com
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
The kernel function prototypes are of no use for userspace and
shouldn't get exposed in an uapi header, so let's move them into
an internal header instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240502173818.58152-1-thuth@redhat.com
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
Null check for 'resource' before assignment is unnecessary because the
variable 'resource' is initialized to NULL at the beginning of the function.
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Link: https://lore.kernel.org/r/20241111142458.67854-1-hardevsinh.palaniya@siliconsignals.io
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
Sparse reports
net/ipv4/inet_diag.c:1511:17: sparse: sparse: Using plain integer as NULL pointer
Due to this code calling cmpxchg on a non-integer type
struct inet_diag_handler *
return !cmpxchg((const struct inet_diag_handler**)&inet_diag_table[type],
NULL, h) ? 0 : -EEXIST;
While hexagon's cmpxchg assigns an integer value to a variable of this
type.
__typeof__(*(ptr)) __oldval = 0;
Update this assignment to cast 0 to the correct type.
The original issue is easily reproduced at head with the below block,
and is absent after this change.
make LLVM=1 ARCH=hexagon defconfig
make C=1 LLVM=1 ARCH=hexagon net/ipv4/inet_diag.o
Fixes: 99a70aa051 ("Hexagon: Add processor and system headers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411091538.PGSTqUBi-lkp@intel.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Christian Gmeiner <cgmeiner@igalia.com>
Link: https://lore.kernel.org/r/20241203221736.282020-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
- hostfs: Convert to writepages
- Many cleanups: Removal of dead macros, missing __init
-----BEGIN PGP SIGNATURE-----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=hSNx
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- hostfs: Convert to writepages
- many cleanups: removal of dead macros, missing __init
* tag 'uml-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Remove unused asm/archparam.h header
um: Include missing headers in asm/pgtable.h
hostfs: Convert to writepages
um: rtc: use RTC time when calculating the alarm
um: Remove unused user_context function
um: Remove unused THREAD_NAME_LEN macro
um: Remove unused PGD_BOUND macro
um: Mark setup_env_path as __init
um: Mark install_fatal_handler as __init
um: Mark set_stklim as __init
um: Mark get_top_address as __init
um: Mark parse_cache_line as __init
um: Mark parse_host_cpu_flags as __init
um: Count iomem_size only once in physmem calculation
um: Remove obsolete fixmap support
um: Remove unused MODULES_LEN macro
Subsystem:
- use boolean values with device_init_wakeup()
Drivers:
- pcf2127: add BSM support
- pcf85063: fix possible out of bound write
-----BEGIN PGP SIGNATURE-----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=BxV0
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Not much this cycle, there are multiple small fixes.
Core:
- use boolean values with device_init_wakeup()
Drivers:
- pcf2127: add BSM support
- pcf85063: fix possible out of bounds write"
* tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: add BSM support
rtc: Remove hpet_rtc_dropped_irq()
dt-bindings: rtc: mxc: Document fsl,imx31-rtc
rtc: stm32: Use syscon_regmap_lookup_by_phandle_args
rtc: zynqmp: Fix optional clock name property
rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()
rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read
rtc: tps6594: Fix integer overflow on 32bit systems
rtc: use boolean values with device_init_wakeup()
rtc: RTC_DRV_SPEAR should not default to y when compile-testing
Add a new ACPI-related quirk for Vexia EDU ATLA 10 tablet 5V (Hans
de Goede) and fix the MADT parsing code so that CPUs with different
entry types (LAPIC and x2APIC) are initialized in the order in which
they appear in the MADT as required by the ACPI specification (Zhang
Rui).
-----BEGIN PGP SIGNATURE-----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=JXCp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add a new ACPI-related quirk for Vexia EDU ATLA 10 tablet 5V (Hans de
Goede) and fix the MADT parsing code so that CPUs with different entry
types (LAPIC and x2APIC) are initialized in the order in which they
appear in the MADT as required by the ACPI specification (Zhang Rui)"
* tag 'acpi-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/acpi: Fix LAPIC/x2APIC parsing order
ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
- Architecutre-specific ftrace recursion trylock tests were
removed in favour of the generic function_graph_enter(),
but s390 got missed. Remove this test for s390 as well.
- Add ftrace_get_symaddr() for s390, which returns the symbol
address from ftrace 'ip' parameter
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZ5udBxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8Ku8AP0UBjHX0VN6f7bIqs5TdrmbVD03
WO7kB/EFnHXZvFdfigD/TRzLmLi1kZtdBCARFDjSiy9wwGbZxYQQuJex23FYQgA=
=MF7E
-----END PGP SIGNATURE-----
Merge tag 's390-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Architecutre-specific ftrace recursion trylock tests were removed in
favour of the generic function_graph_enter(), but s390 got missed.
Remove this test for s390 as well.
- Add ftrace_get_symaddr() for s390, which returns the symbol address
from ftrace 'ip' parameter
* tag 's390-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/tracing: Define ftrace_get_symaddr() for s390
s390/fgraph: Fix to remove ftrace_test_recursion_trylock()