commit cc29ea0073 upstream.
The ESAI_xCR_xWA is xCR's bit, not the xCCR's bit, driver set it to
wrong register, correct it.
Fixes 43d24e76b6 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Ackedy-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 8d7fa3d4ea upstream.
This adds the USB ID of the Hjelmslund Electronics USB485 Iso stick.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 5ddb0869bf upstream.
I've stumbled upon a kernel crash and the logs
pointed me towards the lp5562 driver:
> <4>[306013.841294] lp5562 0-0030: Direct firmware load for lp5562 failed with error -2
> <4>[306013.894990] lp5562 0-0030: Falling back to user helper
> ...
> <3>[306073.924886] lp5562 0-0030: firmware request failed
> <1>[306073.939456] Unable to handle kernel NULL pointer dereference at virtual address 00000000
> <4>[306074.251011] PC is at _raw_spin_lock+0x1c/0x58
> <4>[306074.255539] LR is at release_firmware+0x6c/0x138
> ...
After taking a look I noticed firmware_release()
could be called with either NULL or a dangling
pointer.
Fixes: 10c06d178d ("leds-lp55xx: support firmware interface")
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 78d3820b9b upstream.
The four port Pericom chips have the fourth port at the wrong address.
Make use of quirk to fix it.
Fixes: c8d192428f ("serial: 8250: added acces i/o products quad and octal serial cards")
Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit b896b03bc7 upstream.
Have the correct number of ports created for ACCES serial cards. Two port
cards show up as four ports, and four port cards show up as eight.
Fixes: c8d192428f ("serial: 8250: added acces i/o products quad and octal serial cards")
Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 64494d39ff upstream.
It is unable to read the entry when it is the only one in
binary_bios_measurements:
00000000 00 00 00 00 08 00 00 00 c4 2f ed ad 26 82 00 cb
00000010 1d 15 f9 78 41 c3 44 e7 9d ae 33 20 00 00 00 00
00000020
This is obviously a firmware problem on my linux machine:
Manufacturer: Inspur
Product Name: SA5212M4
Version: 01
However, binary_bios_measurements should return it any way,
rather than nothing, after all its content is completely
valid.
Fixes: 55a82ab318 ("tpm: add bios measurement log")
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Reviewd-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
[bwh: Backported to 3.16:
- Fix an additional comparison in tpm1_bios_measurements_start()
- Adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 442601e87a upstream.
Return -E2BIG when the transfer is incomplete. The upper layer does
not retry, so not doing that is incorrect behaviour.
Fixes: a2871c62e1 ("tpm: Add support for Atmel I2C TPMs")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit df997abeeb upstream.
Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: b33a84a384 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit f96c3ac8df upstream.
When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd->count == 0. The problem can be reproduced like:
truncate -s 100g /tmp/image
mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768
mount -t ext4 -o loop /tmp/image /mnt
resize2fs /dev/loop0 262145
resize2fs /dev/loop0 300000
Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.
Fixes: 1c6bd7173d "ext4: convert file system to meta_bg if needed..."
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 0e6e448bdc upstream.
There are two pin groups for the FSIC SPDIF signal, but the FSIC pin
group array lists only one, and it refers to a nonexistent group.
Fixes: 2ecd4154c9 ("sh-pfc: sh73a0: Add FSI pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit a4b0350047 upstream.
The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a
typo, thus the group cannot be selected.
Fixes: 5088451962 ("pinctrl: sh-pfc: r8a7791 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 21698fd579 upstream.
In the original code before 181bf1e815 the loop was continuing until
it finds the first matching superios[i].io and p->base.
But after 181bf1e815 the logic changed and the loop now returns the
pointer to the first mismatched array element which is then used in
get_superio_dma() and get_superio_irq() and thus returning the wrong
value.
Fix the condition so that it now returns the correct pointer.
Fixes: 181bf1e815 ("parport_pc: clean up the modified while loops using for")
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: QiaoChong <qiaochong@loongson.cn>
[rewrite the commit message]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit abdc644e8c upstream.
The reason is that while swapping two inode, we swap the flags too.
Some flags such as EXT4_JOURNAL_DATA_FL can really confuse the things
since we're not resetting the address operations structure. The
simplest way to keep things sane is to restrict the flags that can be
swapped.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit aa507b5faf upstream.
While do swap between two inode, they swap i_data without update
quota information. Also, swap_inode_boot_loader can do "revert"
somtimes, so update the quota while all operations has been finished.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.16:
- Include <linux/quotaops.h>
- dquot_initialize() does not return an erro
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 67a11611e1 upstream.
Before really do swap between inode and boot inode, something need to
check to avoid invalid or not permitted operation, like does this inode
has inline data. But the condition check should be protected by inode
lock to avoid change while swapping. Also some other condition will not
change between swapping, but there has no problem to do this under inode
lock.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.16: There's no support or test for filesytem encryption]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 904cdbd41d upstream.
Now, we capture a data corruption problem on ext4 while we're truncating
an extent index block. Imaging that if we are revoking a buffer which
has been journaled by the committing transaction, the buffer's jbddirty
flag will not be cleared in jbd2_journal_forget(), so the commit code
will set the buffer dirty flag again after refile the buffer.
fsx kjournald2
jbd2_journal_commit_transaction
jbd2_journal_revoke commit phase 1~5...
jbd2_journal_forget
belongs to older transaction commit phase 6
jbddirty not clear __jbd2_journal_refile_buffer
__jbd2_journal_unfile_buffer
test_clear_buffer_jbddirty
mark_buffer_dirty
Finally, if the freed extent index block was allocated again as data
block by some other files, it may corrupt the file data after writing
cached pages later, such as during unmount time. (In general,
clean_bdev_aliases() related helpers should be invoked after
re-allocation to prevent the above corruption, but unfortunately we
missed it when zeroout the head of extra extent blocks in
ext4_ext_handle_unwritten_extents()).
This patch mark buffer as freed and set j_next_transaction to the new
transaction when it already belongs to the committing transaction in
jbd2_journal_forget(), so that commit code knows it should clear dirty
bits when it is done with the buffer.
This problem can be reproduced by xfstests generic/455 easily with
seeds (3246 3247 3248 3249).
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 58ac323084 upstream.
Stale && dirty keys can be produced in the follow way:
After writeback in write_dirty_finish(), dirty keys k1 will
replace by clean keys k2
==>ret = bch_btree_insert(dc->disk.c, &keys, NULL, &w->key);
==>btree_insert_fn(struct btree_op *b_op, struct btree *b)
==>static int bch_btree_insert_node(struct btree *b,
struct btree_op *op,
struct keylist *insert_keys,
atomic_t *journal_ref,
Then two steps:
A) update k1 to k2 in btree node memory;
bch_btree_insert_keys(b, op, insert_keys, replace_key)
B) Write the bset(contains k2) to cache disk by a 30s delay work
bch_btree_leaf_dirty(b, journal_ref).
But before the 30s delay work write the bset to cache device,
these things happened:
A) GC works, and reclaim the bucket k2 point to;
B) Allocator works, and invalidate the bucket k2 point to,
and increase the gen of the bucket, and place it into free_inc
fifo;
C) Until now, the 30s delay work still does not finish work,
so in the disk, the key still is k1, it is dirty and stale
(its gen is smaller than the gen of the bucket). and then the
machine power off suddenly happens;
D) When the machine power on again, after the btree reconstruction,
the stale dirty key appear.
In bch_extent_bad(), when expensive_debug_checks is off, it would
treat the dirty key as good even it is stale keys, and it would
cause bellow probelms:
A) In read_dirty() it would cause machine crash:
BUG_ON(ptr_stale(dc->disk.c, &w->key, 0));
B) It could be worse when reads hits stale dirty keys, it would
read old incorrect data.
This patch tolerate the existence of these stale && dirty keys,
and treat them as bad key in bch_extent_bad().
(Coly Li: fix indent which was modified by sender's email client)
Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit e422808860 upstream.
Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.
Fix this by casting the u8 value to an unsigned long before the shift.
Detected by CoverityScan, CID#1309693 ("Unintended sign extension")
Fixes: 9a9a54ad7a ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit fb0b322537 upstream.
Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.
Fix this by casting the u8 value to an unsigned long before the shift.
Detected by CoverityScan, CID#714646-714649 ("Unintended sign extension")
Fixes: 2985c29c19 ("rtc: Add rtc support to 88PM80X PMIC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit dc9e471606 upstream.
Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.
Fix this by casting the u8 value to an unsigned long before the shift.
Detected by CoverityScan, CID#144925-144928 ("Unintended sign extension")
Fixes: 008b30408c ("mfd: Add rtc support to 88pm860x")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 77568e535a upstream.
Hash algorithms with an alignmask set, e.g. "xcbc(aes-aesni)" and
"michael_mic", fail the improved hash tests because they sometimes
produce the wrong digest. The bug is that in the case where a
scatterlist element crosses pages, not all the data is actually hashed
because the scatterlist walk terminates too early. This happens because
the 'nbytes' variable in crypto_hash_walk_done() is assigned the number
of bytes remaining in the page, then later interpreted as the number of
bytes remaining in the scatterlist element. Fix it.
Fixes: 900a081f69 ("crypto: ahash - Fix early termination in hash walk")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 9dd0627d8d upstream.
The UVC video driver converts the timestamp from hardware specific unit
to one known by the kernel at the time when the buffer is dequeued. This
is fine in general, but the streamoff operation consists of the
following steps (among other things):
1. uvc_video_clock_cleanup --- the hardware clock sample array is
released and the pointer to the array is set to NULL,
2. buffers in active state are returned to the user and
3. buf_finish callback is called on buffers that are prepared.
buf_finish includes calling uvc_video_clock_update that accesses the
hardware clock sample array.
The above is serialised by a queue specific mutex. Address the problem
by skipping the clock conversion if the hardware clock sample array is
already released.
Fixes: 9c0863b1cc ("[media] vb2: call buf_finish from __queue_cancel")
Reported-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Tested-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit dd9d3d86b0 upstream.
Here is how this device appears in kernel log:
usb 3-1: new full-speed USB device number 18 using xhci_hcd
usb 3-1: New USB device found, idVendor=0b00, idProduct=3070
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Ingenico 3070
usb 3-1: Manufacturer: Silicon Labs
usb 3-1: SerialNumber: 0001
Apparently this is a POS terminal with embedded USB-to-Serial converter.
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit f0c04c2767 upstream.
Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.
Fix this by casting the u8 value to an unsigned long before the shift.
Detected by CoverityScan, CID#138801 ("Unintended sign extension")
Fixes: edf1aaa31f ("[PATCH] RTC subsystem: DS1672 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 32e36bfbcf upstream.
When using SCSI passthrough in combination with the iSCSI target driver
then cmd->t_state_lock may be obtained from interrupt context. Hence, all
code that obtains cmd->t_state_lock from thread context must disable
interrupts first. This patch avoids that lockdep reports the following:
WARNING: inconsistent lock state
4.18.0-dbg+ #1 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes:
000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod]
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0xd2/0x260
_raw_spin_lock+0x32/0x50
iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod]
iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod]
iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod]
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
irq event stamp: 1281
hardirqs last enabled at (1279): [<ffffffff970ade79>] __local_bh_enable_ip+0xa9/0x160
hardirqs last disabled at (1281): [<ffffffff97a008a5>] interrupt_entry+0xb5/0xd0
softirqs last enabled at (1278): [<ffffffff977cd9a1>] lock_sock_nested+0x51/0xc0
softirqs last disabled at (1280): [<ffffffffc07a6e04>] ip6_finish_output2+0x124/0xe40 [ipv6]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&cmd->t_state_lock)->rlock);
<Interrupt>
lock(&(&cmd->t_state_lock)->rlock);
commit a0ce2f0aa6 upstream.
Before this patch, it was possible for two pipes to affect each other after
data had been transferred between them with tee():
============
$ cat tee_test.c
int main(void) {
int pipe_a[2];
if (pipe(pipe_a)) err(1, "pipe");
int pipe_b[2];
if (pipe(pipe_b)) err(1, "pipe");
if (write(pipe_a[1], "abcd", 4) != 4) err(1, "write");
if (tee(pipe_a[0], pipe_b[1], 2, 0) != 2) err(1, "tee");
if (write(pipe_b[1], "xx", 2) != 2) err(1, "write");
char buf[5];
if (read(pipe_a[0], buf, 4) != 4) err(1, "read");
buf[4] = 0;
printf("got back: '%s'\n", buf);
}
$ gcc -o tee_test tee_test.c
$ ./tee_test
got back: 'abxx'
$
============
As suggested by Al Viro, fix it by creating a separate type for
non-mergeable pipe buffers, then changing the types of buffers in
splice_pipe_to_pipe() and link_pipe().
Fixes: 7c77f0b3f9 ("splice: implement pipe to pipe splicing")
Fixes: 70524490ee ("[PATCH] splice: add support for sys_tee()")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.16: Use generic_pipe_buf_steal(), as for other pipe
types, since anon_pipe_buf_steal() does not exist here]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit eaf46edf6e upstream.
The NEON MAC calculation routine fails to handle the case correctly
where there is some data in the buffer, and the input fills it up
exactly. In this case, we enter the loop at the end with w8 == 0,
while a negative value is assumed, and so the loop carries on until
the increment of the 32-bit counter wraps around, which is quite
obviously wrong.
So omit the loop altogether in this case, and exit right away.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: a3fd82105b ("arm64/crypto: AES in CCM mode using ARMv8 Crypto ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit eb5e6730db upstream.
Instantiating "cryptd(crc32c)" causes a crypto self-test failure because
the crypto_alloc_shash() in alg_test_crc32c() fails. This is because
cryptd(crc32c) is an ahash algorithm, not a shash algorithm; so it can
only be accessed through the ahash API, unlike shash algorithms which
can be accessed through both the ahash and shash APIs.
As the test is testing the shash descriptor format which is only
applicable to shash algorithms, skip it for ahash algorithms.
(Note that it's still important to fix crypto self-test failures even
for weird algorithm instantiations like cryptd(crc32c) that no one
would really use; in fips_enabled mode unprivileged users can use them
to panic the kernel, and also they prevent treating a crypto self-test
failure as a bug when fuzzing the kernel.)
Fixes: 8e3ee85e68 ("crypto: crc32c - Test descriptor context format")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 8d84b18f56 upstream.
devm_ioremap_resource() prefers calling devm_request_mem_region() with a
resource name instead of a device name -- this looks pretty iff a resource
name isn't specified via a device tree with a "reg-names" property (in this
case, a resource name is set to a device node's full name), but if it is,
it doesn't really scale since these names are only unique to a given device
node, not globally; so, looking at the output of 'cat /proc/iomem', you do
not have an idea which memory region belongs to which device (see "dirmap",
"regs", and "wbuf" lines below):
08000000-0bffffff : dirmap
48000000-bfffffff : System RAM
48000000-48007fff : reserved
48080000-48b0ffff : Kernel code
48b10000-48b8ffff : reserved
48b90000-48c7afff : Kernel data
bc6a4000-bcbfffff : reserved
bcc0f000-bebfffff : reserved
bec0e000-bec0efff : reserved
bec11000-bec11fff : reserved
bec12000-bec14fff : reserved
bec15000-bfffffff : reserved
e6050000-e605004f : gpio@e6050000
e6051000-e605104f : gpio@e6051000
e6052000-e605204f : gpio@e6052000
e6053000-e605304f : gpio@e6053000
e6054000-e605404f : gpio@e6054000
e6055000-e605504f : gpio@e6055000
e6060000-e606050b : pin-controller@e6060000
e6e60000-e6e6003f : e6e60000.serial
e7400000-e7400fff : ethernet@e7400000
ee200000-ee2001ff : regs
ee208000-ee2080ff : wbuf
I think that devm_request_mem_region() should be called with dev_name()
despite the region names won't look as pretty as before (however, we gain
more consistency with e.g. the serial driver:
08000000-0bffffff : ee200000.rpc
48000000-bfffffff : System RAM
48000000-48007fff : reserved
48080000-48b0ffff : Kernel code
48b10000-48b8ffff : reserved
48b90000-48c7afff : Kernel data
bc6a4000-bcbfffff : reserved
bcc0f000-bebfffff : reserved
bec0e000-bec0efff : reserved
bec11000-bec11fff : reserved
bec12000-bec14fff : reserved
bec15000-bfffffff : reserved
e6050000-e605004f : e6050000.gpio
e6051000-e605104f : e6051000.gpio
e6052000-e605204f : e6052000.gpio
e6053000-e605304f : e6053000.gpio
e6054000-e605404f : e6054000.gpio
e6055000-e605504f : e6055000.gpio
e6060000-e606050b : e6060000.pin-controller
e6e60000-e6e6003f : e6e60000.serial
e7400000-e7400fff : e7400000.ethernet
ee200000-ee2001ff : ee200000.rpc
ee208000-ee2080ff : ee200000.rpc
Fixes: 72f8c0bfa0 ("lib: devres: add convenience function to remap a resource")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 1c2d14212b upstream.
When ext2 filesystem is created with 64k block size, ext2_max_size()
will return value less than 0. Also, we cannot write any file in this fs
since the sb->maxbytes is less than 0. The core of the problem is that
the size of block index tree for such large block size is more than
i_blocks can carry. So fix the computation to count with this
possibility.
File size limits computed with the new function for the full range of
possible block sizes look like:
bits file_size
10 17247252480
11 275415851008
12 2196873666560
13 2197948973056
14 2198486220800
15 2198754754560
16 2198888906752
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 7dd50e205b upstream.
There is a potential NULL pointer dereference in case
alloc_ctrl_packet() fails and returns NULL.
Fixes: 099dc4fb62 ("ipwireless: driver for PC Card 3G/UMTS modem")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 0eb8618bd0 upstream.
kasprintf() does a dynamic memory allocation and can fail.
We have to handle that case.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 45c2ebd702 upstream.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 1d1f898df6 upstream.
The rcu_gp_kthread_wake() function is invoked when it might be necessary
to wake the RCU grace-period kthread. Because self-wakeups are normally
a useless waste of CPU cycles, if rcu_gp_kthread_wake() is invoked from
this kthread, it naturally refuses to do the wakeup.
Unfortunately, natural though it might be, this heuristic fails when
rcu_gp_kthread_wake() is invoked from an interrupt or softirq handler
that interrupted the grace-period kthread just after the final check of
the wait-event condition but just before the schedule() call. In this
case, a wakeup is required, even though the call to rcu_gp_kthread_wake()
is within the RCU grace-period kthread's context. Failing to provide
this wakeup can result in grace periods failing to start, which in turn
results in out-of-memory conditions.
This race window is quite narrow, but it actually did happen during real
testing. It would of course need to be fixed even if it was strictly
theoretical in nature.
This patch does not Cc stable because it does not apply cleanly to
earlier kernel versions.
Fixes: 48a7639ce8 ("rcu: Make callers awaken grace-period kthread")
Reported-by: "He, Bo" <bo.he@intel.com>
Co-developed-by: "Zhang, Jun" <jun.zhang@intel.com>
Co-developed-by: "He, Bo" <bo.he@intel.com>
Co-developed-by: "xiao, jin" <jin.xiao@intel.com>
Co-developed-by: Bai, Jie A <jie.a.bai@intel.com>
Signed-off: "Zhang, Jun" <jun.zhang@intel.com>
Signed-off: "He, Bo" <bo.he@intel.com>
Signed-off: "xiao, jin" <jin.xiao@intel.com>
Signed-off: Bai, Jie A <jie.a.bai@intel.com>
Signed-off-by: "Zhang, Jun" <jun.zhang@intel.com>
[ paulmck: Switch from !in_softirq() to "!in_interrupt() &&
!in_serving_softirq() to avoid redundant wakeups and to also handle the
interrupt-handler scenario as well as the softirq-handler scenario that
actually occurred in testing. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Link: https://lkml.kernel.org/r/CD6925E8781EFD4D8E11882D20FC406D52A11F61@SHSMSX104.ccr.corp.intel.com
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit d7ac3c6ef5 upstream.
IndexCard is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/char/applicom.c:418 ac_write() warn: potential spectre issue 'apbs' [r]
drivers/char/applicom.c:728 ac_ioctl() warn: potential spectre issue 'apbs' [r] (local cap)
Fix this by sanitizing IndexCard before using it to index apbs.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 24d48a61f2 upstream.
Commit '3d035f5806 ("drivers/char/hpet.c: allow user controlled mmap for
user processes")' introduced a new kernel command line parameter hpet_mmap,
that is required to expose the memory map of the HPET registers to
user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is
broken and never takes effect due to missing '=' character in the __setup()
code of hpet_mmap_enable.
Before this patch:
dmesg output with the kernel command line parameter hpet_mmap=1
[ 0.204152] HPET mmap disabled
dmesg output with the kernel command line parameter hpet_mmap=0
[ 0.204192] HPET mmap disabled
After this patch:
dmesg output with the kernel command line parameter hpet_mmap=1
[ 0.203945] HPET mmap enabled
dmesg output with the kernel command line parameter hpet_mmap=0
[ 0.204652] HPET mmap disabled
Fixes: 3d035f5806 ("drivers/char/hpet.c: allow user controlled mmap for user processes")
Signed-off-by: Buland Singh <bsingh@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 8e32e88194 upstream.
When declaring the HSPI RX1_B and TX1_B pins, two mistakes were made:
- the rows and columns in the BGA pin matrix, from which the pin
numbers are derived, were exchanged,
- it was not taken into account that pin row labelling skips
characters I, O, Q, and S.
Fix the order, and the corresponding pin names.
Notes:
- The actual values of the pin numbers don't really matter (they just
have to be unique), so the wrong order didn't have any impact,
- Changing the names of the pins is user-visible, but there are no
users in (upstream) DTS files.
Fixes: 4f82e3ee72 ("sh-pfc: Support pins not associated with a GPIO port")
Fixes: 09cc76a958 ("sh-pfc: r8a7778: add HSPI pin groups")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 28713169d8 upstream.
This patch fixes a build failure when using GCC 8.1:
/usr/bin/ld: block/partitions/ldm.o: in function `ldm_parse_tocblock':
block/partitions/ldm.c:153: undefined reference to `strcmp'
This is caused by a new optimization which effectively replaces a
strncmp() call with a strcmp() call. This affects a number of strncmp()
call sites in the kernel.
The entire class of optimizations is avoided with -fno-builtin, which
gets enabled by -ffreestanding. This may avoid possible future build
failures in case new optimizations appear in future compilers.
I haven't done any performance measurements with this patch but I did
count the function calls in a defconfig build. For example, there are now
23 more sprintf() calls and 39 fewer strcpy() calls. The effect on the
other libc functions is smaller.
If this harms performance we can tackle that regression by optimizing
the call sites, ideally using semantic patches. That way, clang and ICC
builds might benfit too.
Reference: https://marc.info/?l=linux-m68k&m=154514816222244&w=2
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit d986657248 upstream.
Make sure to properly put the of node in case finding the codec
fails.
Fixes: 81e8e49261 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit f990f7fb58 upstream.
Fix an unaligned memory access in tgr192_transform() by using the
unaligned access helpers.
Fixes: 06ace7a9ba ("[CRYPTO] Use standard byte order macros wherever possible")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit ba7d7433a0 upstream.
Some algorithms have a ->setkey() method that is not atomic, in the
sense that setting a key can fail after changes were already made to the
tfm context. In this case, if a key was already set the tfm can end up
in a state that corresponds to neither the old key nor the new key.
It's not feasible to make all ->setkey() methods atomic, especially ones
that have to key multiple sub-tfms. Therefore, make the crypto API set
CRYPTO_TFM_NEED_KEY if ->setkey() fails and the algorithm requires a
key, to prevent the tfm from being used until a new key is set.
Note: we can't set CRYPTO_TFM_NEED_KEY for OPTIONAL_KEY algorithms, so
->setkey() for those must nevertheless be atomic. That's fine for now
since only the crc32 and crc32c algorithms set OPTIONAL_KEY, and it's
not intended that OPTIONAL_KEY be used much.
[Cc stable mainly because when introducing the NEED_KEY flag I changed
AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG
previously didn't have this problem. So these "incompletely keyed"
states became theoretically accessible via AF_ALG -- though, the
opportunities for causing real mischief seem pretty limited.]
Fixes: 9fa68f6200 ("crypto: hash - prevent using keyed hashes without setting key")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 61da76beef upstream.
The following commits:
commit f6dd927f34 ("[media] media: ov7670: calculate framerate properly for ov7675")
commit 04ee6d9204 ("[media] media: ov7670: add possibility to bypass pll for ov7675")
introduced the ability to bypass PLL multiplier and use input clock (xvclk)
as pixel clock output frequency for ov7675 sensor.
PLL is bypassed using register DBLV[7:6], according to ov7670 and ov7675
sensor manuals. Macros used to set DBLV register seem wrong in the
driver, as their values do not match what reported in the datasheet.
Fix by changing DBLV_* macros to use bits [7:6] and set bits [3:0] to
default 0x0a reserved value (according to datasheets).
While at there, remove a write to DBLV register in
"ov7675_set_framerate()" that over-writes the previous one to the same
register that takes "info->pll_bypass" flag into account instead of setting PLL
multiplier to 4x unconditionally.
And, while at there, since "info->pll_bypass" is only used in
set/get_framerate() functions used by ov7675 only, it is not necessary
to check for the device id at probe time to make sure that when using
ov7670 "info->pll_bypass" is set to false.
Fixes: f6dd927f34 ("[media] media: ov7670: calculate framerate properly for ov7675")
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 19c624c6b2 upstream.
This commit corrects max and step values for v4l2 control for
V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1.
It was found by using v4l2-compliance tool and checking result of
VIDIOC_QUERY_EXT_CTRL/QUERYMENU test.
Previously it was complaining that step was bigger than difference
between max and min.
Fixes: 15f4bc3b1f ("[media] s5p-jpeg: Add JPEG controls support")
Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 49710c32cd upstream.
Previously when doing format enumeration, it was returning all
formats supported by driver, even if they're not supported by hw.
Add missing check for fmt_ver_flag, so it'll be fixed and only those
supported by hw will be returned. Similar thing is already done
in s5p_jpeg_find_format.
It was found by using v4l2-compliance tool and checking result
of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test
and using v4l2-ctl to get list of all supported formats.
Tested on s5pv210-galaxys (Samsung i9000 phone).
Fixes: bb677f3ac4 ("[media] Exynos4 JPEG codec v4l2 driver")
Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
[hverkuil-cisco@xs4all.nl: fix a few alignment issues]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 607ea5090b upstream.
arch_early_irq_init() does nothing different than the weak
arch_early_irq_init() in kernel/softirq.c
Fixes: 089fb442f3 ("powerpc: Use ARCH_IRQ_INIT_FLAGS")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 251b7aea34 upstream.
The memcpy()s in the PCBC implementation use walk->iv as both the source
and destination, which has undefined behavior. These memcpy()'s are
actually unneeded, because walk->iv is already used to hold the previous
plaintext block XOR'd with the previous ciphertext block. Thus,
walk->iv is already updated to its final value.
So remove the broken and unnecessary memcpy()s.
Fixes: 91652be5d1 ("[CRYPTO] pcbc: Add Propagated CBC template")
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 3a28cff3bd upstream.
commit 0dc1ba24f7 ("SELINUX: Make selinux cache VFS RCU walks safe")
results in no audit messages at all if in permissive mode because the
cache is updated during the rcu walk and thus no denial occurs on
the subsequent ref walk. Fix this by not updating the cache when
performing a non-blocking permission check. This only affects search
and symlink read checks during rcu walk.
Fixes: 0dc1ba24f7 ("SELINUX: Make selinux cache VFS RCU walks safe")
Reported-by: BMK <bmktuwien@gmail.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
[bwh: Backported to 3.16:
- Add flags parameter to avc_update_node(), done upstream in commit
fa1aa143ac "selinux: extended permissions for ioctls"
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 7b20ea2579 upstream.
This allows MAY_NOT_BLOCK to be passed, in RCU-walk mode, through
the new avc_has_perm_flags() to avc_audit() and thence the slow_avc_audit.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.16 as dependency of commit 3a28cff3bd
"selinux: avoid silent denials in permissive mode under RCU walk"]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
