Move the spin unlocking to after reading the contents of the
PMIF_SWINF_(x)_RDATA_31_0 register in pmif_spmi_read_cmd():
since this is the only register that we can read to get the
data from all of the arbitered busses, a concurrent request
for reading (especially on a busy arbiter) will show a race
condition and a unexpected or corrupted value may be read.
Doing the entire read sequence while spin locked guarantees
that concurrent access to the arbiter doesn't happen.
Fixes: f200fff8d0 ("spmi: mtk-pmif: Serialize PMIF status check and command submission")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixes: b45b3ccef8 ("spmi: mediatek: Add support for MT6873/8192")
Link: https://patch.msgid.link/20260123182039.224314-4-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for adding support for MT8196/MT6991 SoCs having
multiple SPMI busses, move the bus specific parameters into a new
pmif_bus structure and keep the SoC-specific data in the already
existing struct pmif, and add means to register multiple SPMI
controllers.
While this needs a different devicetree node structure, where each
of the controllers are in subnodes of a main SPMI node, and where
each has its own resources (iospaces and clocks), support for the
legacy single-controller was retained and doesn't require any DT
change in the currently supported SoCs.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the MT8196 SPMI 2.0 Controller with a new schema.
This is a MIPI SPMI 2.0 compliant IP, composed of a main arbiter
and two SPMI master controllers with Request Capable Slave (RCS)
support.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260123182039.224314-2-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Mukesh fixes a typo in comments.
- Thadeu adds support for built-in dfl driver.
- Michal changes his email.
- Romain corrects the error handling when an fpga bridge is missing.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCaXHsnRMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzarvoA/Rv2fTtQfd6rgebgoY90/jKk2TL2YyVX
ySd2JE8eEFtrAQCVnnG9JmjTkqHQtwT5pNeigFSrtELxaJUGl7WT/XnwBA==
=JBAR
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-v6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.20-rc1
- Mukesh fixes a typo in comments.
- Thadeu adds support for built-in dfl driver.
- Michal changes his email.
- Romain corrects the error handling when an fpga bridge is missing.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-v6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: dfl: fix typo in header file
fpga: dfl: use subsys_initcall to allow built-in drivers to be added
fpga: xilinx: Switch Michal Simek's email to new one
fpga: of-fpga-region: Fail if any bridge is missing
This reverts commit 5f0bf80cc5.
This was asked to be reverted as it is not the correct way to do this.
Fixes: 5f0bf80cc5 ("mmc: rtsx_pci: add quirk to disable MMC_CAP_AGGRESSIVE_PM for RTS525A")
Cc: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit eac85fbd08.
This is not the correct change, so revert it for now.
Fixes: eac85fbd08 ("mmc: rtsx: reset power state on suspend")
Cc: Matthew Schwartz <matthew.schwartz@linux.dev>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit aced969e9b.
It was determined that this was not the correct "fix", so should be
reverted.
Fixes: aced969e9b ("mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms")
Cc: Matthew Schwartz <matthew.schwartz@linux.dev>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
--------
- Add support for loading dual ELF image format firmware to Qcom Trust
Management Engine Lit (TME-L) supported devices like QCC2072, which require
separate ELF header for SBL and WLAN firmware segments in a single firmware.
- Remove the MHI auto_queue feature support. This feature was added to offload
the queuing of buffers from the client drivers to the MHI stack, but it caused
a lot of race over the time. So remove this feature from the QRTR client
driver and also from the MHI stack/controller drivers.
- Move the .probe() and .remove() callbacks from driver level to bus level.
MHI Endpoint
------------
- Move the .probe() and .remove() callbacks from driver level to bus level.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmlvHJAACgkQVZ8R5v6R
zvUpogf+Leqm2ma1cORmVV0YgSQkC/DNpNw2wD8oYKRp0hlLdiQTVyJ1l0LZhK1v
ud/0dDQ25HFlnICltm/eyzDlRp/kJz2OVh4becoDmnUqgqnfR4G1WP3DHhPhvODo
5wFiKU463RW1Ba0GsJxhPjSNwbXQeMhyBFOIr2XuWNI9wLCT6c5BRXbM8X7fVTcY
6pNONiEb8YMpclJAIoZwgMLlvHut+RmpKuVdYzOUfzL71os6AmRaDbKFVaBjTqDK
aXUrh5WZZyVndKcxIPTHzrRiZSbqG8laQp8ES2Lfk5ogX5MUEVJVZ14m2Tx9inyH
YYaOnYAyeW0/ZP33/p1odfqrJ6RX4w==
=8oyK
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v6.20' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
--------
- Add support for loading dual ELF image format firmware to Qcom Trust
Management Engine Lit (TME-L) supported devices like QCC2072, which require
separate ELF header for SBL and WLAN firmware segments in a single firmware.
- Remove the MHI auto_queue feature support. This feature was added to offload
the queuing of buffers from the client drivers to the MHI stack, but it caused
a lot of race over the time. So remove this feature from the QRTR client
driver and also from the MHI stack/controller drivers.
- Move the .probe() and .remove() callbacks from driver level to bus level.
MHI Endpoint
------------
- Move the .probe() and .remove() callbacks from driver level to bus level.
* tag 'mhi-for-v6.20' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: ep: Use bus callbacks for .probe() and .remove()
bus: mhi: host: Use bus callbacks for .probe() and .remove()
bus: mhi: host: Drop the auto_queue support
net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels
mhi: host: Add support for loading dual ELF image format
The existing 1ms delay in sd_power_on is insufficient and causes resume
errors around 4% of the time.
Increasing the delay to 5ms resolves this issue after testing 300
s2idle cycles.
Fixes: 1f311c94aa ("mmc: rtsx: add 74 Clocks in power on flow")
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260105060236.400366-3-matthew.schwartz@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When rtsx_pci suspends, the card reader hardware powers off but the sdmmc
driver's prev_power_state remains as MMC_POWER_ON. This causes sd_power_on
to skip reinitialization on the next I/O request, leading to DMA transfer
timeouts and errors on resume 20% of the time.
Add a power_off slot callback so the PCR can notify the sdmmc driver
during suspend. The sdmmc driver resets prev_power_state, and sd_request
checks this to reinitialize the card before the next I/O.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260105060236.400366-2-matthew.schwartz@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using MMC_CAP_AGGRESSIVE_PM on RTS525A card readers causes game
performance issues when the card reader comes back from idle into active
use. This can be observed in Hades II when loading new sections of the
game or menu after the card reader puts itself into idle, and presents
as a 1-2 second hang.
Add EXTRA_CAPS_NO_AGGRESSIVE_PM quirk to allow cardreader drivers to
opt-out of aggressive PM, and set it for RTS525A.
Closes: https://lore.kernel.org/linux-mmc/ff9a7c20-f465-4afa-bf29-708d4a52974a@linux.dev/
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260103204226.71752-1-matthew.schwartz@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the leading "CONFIG_" when referring to Kconfig symbols--
it is supplied by the kconfig software.
This make the default values work as (apparently) expected.
Fixes: a02509f301 ("stm class: Factor out default framing protocol")
Fixes: d69d5e8311 ("stm class: Add MIPI SyS-T protocol support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251228190502.2480758-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In many kunit assert functions a const pointer is passed to
container_of() and out pops a non-const pointer, which really isn't the
correct thing to do at all. Fix this up by correctly marking the
casted-to pointer as const to preserve the marking.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <raemoar63@gmail.com>
Cc: linux-kselftest@vger.kernel.org
Cc: kunit-dev@googlegroups.com
Reviewed-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/2025121746-result-staleness-5a68@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the internal cmp function, a const pointer is cast out to a non-const
pointer by using container_of(). This is probably not what is intended
at all, so fix up the const marking to properly preserve what is really
happening (i.e. the const should flow through the container_of() call)
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/2025121751-backtrack-manifesto-7c57@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modify comments in fifo_icap.c to prevent all kernel-doc warnings:
Warning: fifo_icap.c:51 This comment starts with '/**', but isn't a
kernel-doc comment.
* HwIcap Device Interrupt Status/Enable Registers
Warning: fifo_icap.c:106 No description found for return value
of 'fifo_icap_fifo_read'
Warning: fifo_icap.c:160 No description found for return value
of 'fifo_icap_get_status'
Warning: fifo_icap.c:171 No description found for return value
of 'fifo_icap_busy'
Warning: fifo_icap.c:184 No description found for return value
of 'fifo_icap_write_fifo_vacancy'
Warning: fifo_icap.c:196 No description found for return value
of 'fifo_icap_read_fifo_occupancy'
Warning: fifo_icap.c:207 bad line:
Warning: fifo_icap.c:214 No description found for return value
of 'fifo_icap_set_configuration'
Warning: fifo_icap.c:290 function parameter 'frame_buffer' not described
in 'fifo_icap_get_configuration'
Warning: fifo_icap.c:290 function parameter 'num_words' not described
in 'fifo_icap_get_configuration'
Warning: fifo_icap.c:290 No description found for return value
of 'fifo_icap_get_configuration'
Warning: fifo_icap.c:357 expecting prototype for buffer_icap_reset().
Prototype was for fifo_icap_reset() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20251214191750.2173225-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the function parameter parts of the struct member descriptions
to prevent kernel-doc warnings:
Warning: include/linux/eeprom_93cx6.h:64 struct member 'register_read'
not described in 'eeprom_93cx6'
Warning: ../include/linux/eeprom_93cx6.h:64 struct member 'register_write'
not described in 'eeprom_93cx6'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251214202739.2216904-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kgdbts_option_setup() function is invoked only once early in boot
via the __setup("kgdbts=", ...) mechanism to parse the kernel
command-line option.After init is complete, it is never called again.
Annotating it with __init places the function in the .init.text section,
enabling the kernel to free its code memory during the init memory
cleanup phase (free_initmem()). This reduces the kernel’s runtime
memory footprint with no functional side effects.
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Link: https://patch.msgid.link/20251208130525.2775885-1-pengcan@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct typos in 3 struct member descriptions to eliminate all
kernel-doc warnings in comedi_8254.h:
Warning: include/linux/comedi/comedi_8254.h:112 struct member 'next_div'
not described in 'comedi_8254'
Warning: include/linux/comedi/comedi_8254.h:112 struct member 'clock_src'
not described in 'comedi_8254'
Warning: include/linux/comedi/comedi_8254.h:112 struct member 'gate_src'
not described in 'comedi_8254'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251214202727.2215461-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fake "comedi_test" device currently has two subdevices: an analog
input subdevice, and an analog output subdevice. To make it a bit more
useful for testing, add a third subdevice for digital I/O.
The new DIO subdevice has 32 channels with each channel individually
programmable as an input or an output. To add a bit of interaction,
channels 0 to 15 are wired to channels 16 to 31 (0 to 16, 1 to 17,
etc.), and the state of each wire can be read back on both of the
channels connected to it. The outputs are modelled as NPN open
collector outputs with a pull-up resistor on the wire, so the state of
each wire (and the value read back from each channel connected to it)
will be logic level 1 unless either channel is configured as an output
at logic level 0.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251210124455.69131-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main mutex in a comedi device can get held for quite a while when
processing comedi instructions, so for performance reasons, the "read",
"write", and "poll" file operations do not use it; they use the
`attach_lock` rwsemaphore to protect against the comedi device becoming
detached at an inopportune moment. As an alternative to using the
"read" and "write" operations, user-space can mmap the data buffer and
use the `COMEDI_BUFINFO` ioctl to manage data transfer through the
buffer. However, the "ioctl" file handler currently locks the main
mutex for all ioctl commands. Make the handling of the `COMEDI_BUFINFO`
an exception, using the `attach_lock` rwsemaphore during normal
operation. However, before it calls `do_become_nonbusy()` at the end of
acquisition, it does need to lock the main mutex, but it needs to unlock
the `attach_lock` rwsemaphore first to avoid deadlock. After locking
the main mutex, it needs to check that it is still in a suitable state
to become non-busy, because things may have changed while unlocked.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251205131332.16672-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix following sparse warning:
CHECK drivers/bus/fsl-mc/fsl-mc-bus.c
drivers/bus/fsl-mc/fsl-mc-bus.c:435:26: warning: symbol 'fsl_mc_bus_dpdbg_type' was not declared. Should it be static?
fsl_mc_bus_dpdbg_type is not used outside of fsl-mc-bus.c
Remove the EXPORT_SYMBOL and declare it static.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/628c49881b3a1df76cfd2f8fd2aad976692a465a.1768566053.git.chleroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are nearly identical to the respective driver callbacks. The only
difference is that .remove() returns void instead of int.
The objective is to get rid of users of struct device_driver callbacks
.probe() and .remove() to eventually remove these.
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260113145012.2379944-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ni_usb_init(), if ni_usb_setup_init() fails, the function returns
-EFAULT without freeing the allocated writes buffer, leading to a
memory leak.
Additionally, ni_usb_setup_init() returns 0 on failure, which causes
ni_usb_init() to return -EFAULT, an inappropriate error code for this
situation.
Fix the leak by freeing writes in the error path. Modify
ni_usb_setup_init() to return -EINVAL on failure and propagate this
error code in ni_usb_init().
Fixes: 4e127de14f ("staging: gpib: Add National Instruments USB GPIB driver")
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Suggested-by: Dave Penkler <dpenkler@gmail.com>
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20251230034546.929452-1-zilin@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ni_usb_receive_bulk_msg() succeeds but without reading 16 bytes, then
the error code needs to be set. The current code returns success.
Fixes: 4e127de14f ("staging: gpib: Add National Instruments USB GPIB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSlMpbE4IrQuBGFS@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This accidentally returns 1 on error, but it should return negative
error codes.
Fixes: 9dde4559e9 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSlMnaT1M104NJb2@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver is useful if at least one DRM driver registers an auxiliary device
for the ME interface. With the addition of Xe, this is no longer just i915.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-5-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While this is not a particularly useful configuration, the MEI code should
compile even when no drivers for a GPU containing a management engine are
built.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-4-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are enumerated via an auxiliary bus, so there is no functional
dependency between these drivers, therefore allow compiling MEI as builtin
even when i915/xe are built as modules.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-3-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xe driver supports dGPUs which can be plugged into non-x86 machines,
and exposes a MEI GSC interface, so this driver is no longer x86 only.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-2-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log. Since commit ad67b74d24 ("printk: hash
addresses printed with %p") the regular %p has been improved to avoid
this issue. Furthermore, restricted pointers ("%pK") were never meant
to be used through printk(). They can still unintentionally leak raw
pointers or acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through
seq_file, for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260107-restricted-pointers-binder-v1-1-181018bf3812@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is currently an inconsistency between C and Rust, which is that
when Rust requires cfg(CONFIG_COMPAT) on compat_ioctl when using the
compat_ptr_ioctl symbol because '#define compat_ptr_ioctl NULL' does not
get translated to anything by bindgen.
But it's not *just* a matter of translating the '#define' into Rust when
CONFIG_COMPAT=n. This is because when CONFIG_COMPAT=y, the type of
compat_ptr_ioctl is a non-nullable function pointer, and to seamlessly
use it regardless of the config, we need a nullable function pointer.
I think it's important to do something about this; I've seen the mistake
of accidentally forgetting '#[cfg(CONFIG_COMPAT)]' when compat_ptr_ioctl
is used multiple times now.
This explicitly declares 'bindings::compat_ptr_ioctl' as an Option that
is always defined but might be None. This matches C, but isn't ideal:
it modifies the bindings crate. But I'm not sure if there's a better way
to do it. If we just redefine in kernel/, then people may still use the
one in bindings::, since that is where you would normally find it. I am
open to suggestions.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260105-redefine-compat_ptr_ioctl-v1-1-25edb3d91acc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the Android Goldfish QEMU Pipe binding to DT schema format.
Move the file to the misc directory as it represents a miscellaneous
communication device.
Update the example node name to 'pipe' to comply with generic node
naming standards and fix the mismatch between unit address and reg
property in the original example.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260113092602.3197681-3-visitorckw@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- A couple more fixes for the lib/crypto KUnit tests
- Fix missing MMU protection for the AES S-box
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaWP6dBQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK89sAQCLiV7LQdtHp7IJ21JhdrxPLSfhiUgp
HeSwwFylciRfggD+Ml19H/Pa3kJYbkQChL44AizlartCaiyLuiEfeTF3NQE=
=dYlq
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- A couple more fixes for the lib/crypto KUnit tests
- Fix missing MMU protection for the AES S-box
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: aes: Fix missing MMU protection for AES S-box
MAINTAINERS: add test vector generation scripts to "CRYPTO LIBRARY"
lib/crypto: tests: Fix syntax error for old python versions
lib/crypto: tests: polyval_kunit: Increase iterations for preparekey in IRQs
Here are some small char/misc driver fixes for some reported issues.
Included in here is:
- much reported rust_binder fix
- counter driver fixes
- new device ids for the mei driver
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaWOjpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylCmACdEcuxjmhVP6Ye7ub22irLxy3h2qYAoJihKZuf
WlNQqB0z2fc/CvfO0xoQ
=/MYq
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for some reported issues.
Included in here is:
- much reported rust_binder fix
- counter driver fixes
- new device ids for the mei driver
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
rust_binder: remove spin_lock() in rust_shrink_free_page()
mei: me: add nova lake point S DID
counter: 104-quad-8: Fix incorrect return value in IRQ handler
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
of SEV noinstr methods, to further robustify the code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GwVv
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Disable GCOV instrumentation in the SEV noinstr.c collection of SEV
noinstr methods, to further robustify the code"
* tag 'x86-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Disable GCOV on noinstr object
- Fix an endianness bug in the gic-v5 irqchip driver
- Revert a broken commit from the riscv-imsic irqchip driver
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qhAZ
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip fixes from Ingo Molnar:
- Fix an endianness bug in the gic-v5 irqchip driver
- Revert a broken commit from the riscv-imsic irqchip driver
* tag 'irq-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "irqchip/riscv-imsic: Embed the vector array in lpriv"
irqchip/gic-v5: Fix gicv5_its_map_event() ITTE read endianness
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix CONFIG_RELOCATABLE=y boots by building Image files from vmlinux,
rather than vmlinux.unstripped, now that the .modinfo section is
included in vmlinux.unstripped.
- Prevent branch predictor poisoning microarchitectural attacks that
use the syscall index as a vector by using array_index_nospec() to
clamp the index after the bounds check (as x86 and ARM64 already
do).
- Fix a crash in test_kprobes when building with Clang.
- Fix a deadlock possible when tracing is enabled for SBI ecalls.
- Fix the definition of the Zk standard RISC-V ISA extension bundle,
which was missing the Zknh extension.
- A few other miscellaneous non-functional cleanups, removing unused
macros, fixing an out-of-date path in code comments, resolving a
compile-time warning for a type mismatch in a pr_crit(), and removing
an unnecessary header file inclusion.
-----BEGIN PGP SIGNATURE-----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=BtHz
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Notable changes include a fix to close one common microarchitectural
attack vector for out-of-order cores. Another patch exposed an
omission in my boot test coverage, which is currently missing
relocatable kernels. Otherwise, the fixes seem to be settling down for
us.
- Fix CONFIG_RELOCATABLE=y boots by building Image files from
vmlinux, rather than vmlinux.unstripped, now that the .modinfo
section is included in vmlinux.unstripped
- Prevent branch predictor poisoning microarchitectural attacks that
use the syscall index as a vector by using array_index_nospec() to
clamp the index after the bounds check (as x86 and ARM64 already
do)
- Fix a crash in test_kprobes when building with Clang
- Fix a deadlock possible when tracing is enabled for SBI ecalls
- Fix the definition of the Zk standard RISC-V ISA extension bundle,
which was missing the Zknh extension
- A few other miscellaneous non-functional cleanups, removing unused
macros, fixing an out-of-date path in code comments, resolving a
compile-time warning for a type mismatch in a pr_crit(), and
removing an unnecessary header file inclusion"
* tag 'riscv-for-linus-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: trace: fix snapshot deadlock with sbi ecall
riscv: remove irqflags.h inclusion in asm/bitops.h
riscv: cpu_ops_sbi: smp_processor_id() returns int, not unsigned int
riscv: configs: Clean up references to non-existing configs
riscv: kexec_image: Fix dead link to boot-image-header.rst
riscv: pgtable: Cleanup useless VA_USER_XXX definitions
riscv: cpufeature: Fix Zk bundled extension missing Zknh
riscv: fix KUnit test_kprobes crash when building with Clang
riscv: Sanitize syscall table indexing under speculation
riscv: boot: Always make Image from vmlinux, not vmlinux.unstripped
- Fix swapped example values for the `family` and `machine` attributes
in the sysfs SoC bus ABI documentation.
- Fix Rust build and intra-doc issues when optional subsystems
(CONFIG_PCI, CONFIG_AUXILIARY_BUS, CONFIG_PRINTK) are disabled.
- Fix typos and incorrect safety comments in Rust PCI, DMA, and device
ID documentation.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaWK1TwAKCRBFlHeO1qrK
LlNtAP9a2C6HtdumNpYec5bbEIEAHuWIqH8DoypF0jlIP11E6QD+ONnmiWnlRyb+
iJzTXy7EZfV+/zbszWLpQ6qiuX38vgo=
=MZle
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix swapped example values for the `family` and `machine` attributes
in the sysfs SoC bus ABI documentation
- Fix Rust build and intra-doc issues when optional subsystems
(CONFIG_PCI, CONFIG_AUXILIARY_BUS, CONFIG_PRINTK) are disabled
- Fix typos and incorrect safety comments in Rust PCI, DMA, and
device ID documentation
* tag 'driver-core-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: device: Remove explicit import of CStrExt
rust: pci: fix typos in Bar struct's comments
rust: device: fix broken intra-doc links
rust: dma: fix broken intra-doc links
rust: driver: fix broken intra-doc links to example driver types
rust: device_id: replace incorrect word in safety documentation
rust: dma: remove incorrect safety documentation
docs: ABI: sysfs-devices-soc: Fix swapped sample values
Fixes tracing test_multiple_writes stalls when buffer_size_kb is less
than 12KB.
-----BEGIN PGP SIGNATURE-----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=zuty
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"Fix tracing test_multiple_writes stalls when buffer_size_kb is less
than 12KB"
* tag 'linux_kselftest-fixes-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/tracing: Fix test_multiple_writes stall
Including:
- Generic IO-Page-Table code:
- Several Kconfig-related build fixes
- Fix for when gcc 8.5 on PPC refuses to inline a function from a
header file.
-----BEGIN PGP SIGNATURE-----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=h82g
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iomu fixes from Joerg Roedel:
- several Kconfig-related build fixes
- fix for when gcc 8.5 on PPC refuses to inline a function from a
header file
* tag 'iommu-fixes-v6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommupt: Make pt_feature() always_inline
iommufd/selftest: Prevent module/builtin conflicts in kconfig
iommufd/selftest: Add missing kconfig for DMA_SHARED_BUFFER
iommupt: Fix the kunit building
Sheng Yong reported [1] that Android APEX images didn't work with commit
072a7c7cdb ("erofs: don't bother with s_stack_depth increasing for
now") because "EROFS-formatted APEX file images can be stored within an
EROFS-formatted Android system partition."
In response, I sent a quick fat-fingered [PATCH v3] to address the
report. Unfortunately, the updated condition was incorrect:
if (erofs_is_fileio_mode(sbi)) {
- sb->s_stack_depth =
- file_inode(sbi->dif0.file)->i_sb->s_stack_depth + 1;
- if (sb->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) {
- erofs_err(sb, "maximum fs stacking depth exceeded");
+ inode = file_inode(sbi->dif0.file);
+ if ((inode->i_sb->s_op == &erofs_sops && !sb->s_bdev) ||
+ inode->i_sb->s_stack_depth) {
The condition `!sb->s_bdev` is always true for all file-backed EROFS
mounts, making the check effectively a no-op.
The real fix tested and confirmed by Sheng Yong [2] at that time was
[PATCH v3 RESEND], which correctly ensures the following EROFS^2 setup
works:
EROFS (on a block device) + EROFS (file-backed mount)
But sadly I screwed it up again by upstreaming the outdated [PATCH v3].
This patch applies the same logic as the delta between the upstream
[PATCH v3] and the real fix [PATCH v3 RESEND].
Reported-by: Sheng Yong <shengyong1@xiaomi.com>
Closes: https://lore.kernel.org/r/3acec686-4020-4609-aee4-5dae7b9b0093@gmail.com [1]
Fixes: 072a7c7cdb ("erofs: don't bother with s_stack_depth increasing for now")
Link: https://lore.kernel.org/r/243f57b8-246f-47e7-9fb1-27a771e8e9e8@gmail.com [2]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc 8.5 on powerpc does not automatically inline these functions even
though they evaluate to constants in key cases. Since the constant
propagation is essential for some code elimination and built-time checks
this causes a build failure:
ERROR: modpost: "__pt_no_sw_bit" [drivers/iommu/generic_pt/fmt/iommu_amdv1.ko] undefined!
Caused by this:
if (pts_feature(&pts, PT_FEAT_DMA_INCOHERENT) &&
!pt_test_sw_bit_acquire(&pts,
SW_BIT_CACHE_FLUSH_DONE))
flush_writes_item(&pts);
Where pts_feature() evaluates to a constant false. Mark them as
__always_inline to force it to evaluate to a constant and trigger the code
elimination.
Fixes: 7c5b184db7 ("genpt: Generic Page Table base API")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512230720.9y9DtWIo-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The selftest now depends on the AMDv1 page table, however the selftest
kconfig itself is just an sub-option of the main IOMMUFD module kconfig.
This means it cannot be modular and so kconfig allowed a modular
IOMMU_PT_AMDV1 with a built in IOMMUFD. This causes link failures:
ld: vmlinux.o: in function `mock_domain_alloc_pgtable.isra.0':
selftest.c:(.text+0x12e8ad3): undefined reference to `pt_iommu_amdv1_init'
ld: vmlinux.o: in function `BSWAP_SHUFB_CTL':
sha1-avx2-asm.o:(.rodata+0xaa36a8): undefined reference to `pt_iommu_amdv1_read_and_clear_dirty'
ld: sha1-avx2-asm.o:(.rodata+0xaa36f0): undefined reference to `pt_iommu_amdv1_map_pages'
ld: sha1-avx2-asm.o:(.rodata+0xaa36f8): undefined reference to `pt_iommu_amdv1_unmap_pages'
ld: sha1-avx2-asm.o:(.rodata+0xaa3720): undefined reference to `pt_iommu_amdv1_iova_to_phys'
Adjust the kconfig to disable IOMMUFD_TEST if IOMMU_PT_AMDV1 is incompatible.
Fixes: e93d5945ed ("iommufd: Change the selftest to use iommupt instead of xarray")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512210135.freQWpxa-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
