Add support for the GPIO controller found on Realtek DHC RTD1625 SoCs.
Unlike the existing Realtek GPIO driver (drivers/gpio/gpio-rtd.c),
which manages pins via shared bank registers, the RTD1625 introduces
a per-pin register architecture. Each GPIO line now has its own
dedicated 32-bit control register to manage configuration independently,
including direction, output value, input value, interrupt enable, and
debounce. Therefore, this distinct hardware design requires a separate
driver.
The RTD1625 GPIO controller has a hardware quirk where both 'assert'
and 'de-assert' interrupts are fired simultaneously on any edge toggle.
The driver works around this quirk to correctly handle edge interrupts.
Interrupt support is optional for this device, matching the dt-bindings.
If the interrupts property is not provided, the driver simply skips IRQ
initialization and operates purely as a basic GPIO controller.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://patch.msgid.link/20260726125209.140307-10-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Add a new set_config callback to allow drivers to implement
hardware-specific configuration such as debounce settings, or other
platform-specific GPIO properties.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-8-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Introduce a new optional 'value_xlate' callback. This routine allows drivers
to translate or modify the register value and mask immediately before a write
operation. It is particularly useful for hardware that requires additional
control bits, such as a write-enable bit, to be appended to the data
dynamically.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Suggested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-7-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Extend the reg_mask_xlate callback with an operation type parameter
(enum gpio_regmap_operation) to allow drivers to return different
register/mask combinations depending on the specific GPIO operation.
Consequently, update all existing drivers utilizing the gpio-regmap
framework (across drivers/gpio, drivers/iio, and drivers/pinctrl)
to accommodate the new reg_mask_xlate function signature.
Acked-by: William Breathitt Gray <wbg@kernel.org>
Acked-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com> #for-iio
Suggested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-6-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Order kernel-doc descriptions with the actual appearance.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-5-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
When GPIO regmap creates an IRQ chip on behalf of the user, it also
takes an ownership of the respective callbacks and driver data.
With that being done, apply default resource callbacks that keep
tracking the IRQ requests and releases.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-4-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
When GPIO regmap based driver supplies its own IRQ domain, it might
still want to keep track of the IRQ requests and releases, in particular
to prevent a GPIO, which is used and locked as IRQ, to be requested
via standard ways. Provide default callbacks for such cases and keep
struct gpio_chip private to GPIO regmap implementation.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-3-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
This reverts commit a57e27c43b.
The driver will be rewritten to use the gpio-regmap infrastructure
once Andy Shevchenko's patches for gpio-regmap are applied.
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-2-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
-----BEGIN PGP SIGNATURE-----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=Ybrr
-----END PGP SIGNATURE-----
Merge tag 'config-gpio-legacy-for-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into gpio/for-next
gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
linux/gpio.h is going away, so remove taht as the driver already
includes linux/gpio/consumer.h.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/gpio.h is going away, so remove that since the driver already
includes linux/gpio/consumer.h.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/gpio.h should no longer be used, so remove those and
make sure linux/gpio/consumer.h is included instead.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The pcmcia drivers all use the legacy interfaces, so convert to
include linux/gpio/legacy.h instead.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/gpio.h should no longer be used, convert these instead to
either linux/gpio/consumer.h or linux/gpio/legacy.h as needed.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/gpio.h should no longer be used, convert these instead to
linux/gpio/legacy.h for the sh boards using the legacy interfaces,
or remove it where it is not needed at all.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/gpio.h should no longer be used, convert these instead to
either linux/gpio/consumer.h or linux/gpio/legacy.h as needed.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The OLPC GPIO controller sets up a fixed number space that is used
by at least two drivers:
arch/x86/platform/olpc/olpc-xo1-sci.c: In function 'setup_ec_sci':
arch/x86/platform/olpc/olpc-xo1-sci.c:358:13: error: implicit declaration of function 'gpio_request' [-Wimplicit-function-declaration]
358 | r = gpio_request(OLPC_GPIO_ECSCI, "OLPC-ECSCI");
| ^~~~~~~~~~~~
sound/pci/cs5535audio/cs5535audio_olpc.c: In function 'olpc_analog_input':
sound/pci/cs5535audio/cs5535audio_olpc.c:41:9: error: implicit declaration of function 'gpio_set_value'; did you mean 'gpiod_set_value'? [-Wimplicit-function-declaration]
41 | gpio_set_value(OLPC_GPIO_MIC_AC, on);
The AMD Geode platform that this is based on is now marked as
'Orphaned' in Kconfig, and it is likely that there are no XO1
users on modern kernels, but so far there is no consensus on
removing it entirely.
Select CONFIG_GPIOLIB_LEGACY for this platform and make sure the
sound driver portion cannot be compiled without this.
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many board files on sh reference the legacy gpiolib interfaces that
are becoming optional. To ensure the boards can keep building, select
CONFIG_GPIOLIB_LEGACY on each of the boards that have one of the
hardcoded calls.
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver converts information from ACPI in x86 based tablets and
laptops into platform_data for the gpio_keys driver, using the obsolete
gpio number based interfaces.
This should really be converted to some other method, but since the
conversion is nontrivial, have this one select GPIOLIB_LEGACY for the
time being.
This enables turning GPIOLIB_LEGACY off by default on most kernel
builds. Since the driver is only used on x86 portables, add a CONFIG_X86
dependency, which means non-x86 allmodconfig builds usuallly build
without the legacy gpio support.
Link: https://lore.kernel.org/all/ah-1z9LhVG0wtfBw@google.com/
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The software node fw_devlink support already has its own kunit suite, but
that verifies the fwnode links in isolation. Add GPIO tests that prove
the ordering works in a real-life use-case: a GPIO consumer that
references its provider via a software node.
The first suite registers the provider's software node, adds the consumer
device first and checks that fw_devlink defers its probe until the
provider has been added and bound. The second covers the fallback:
with the provider's software node not yet registered no supplier link is
created, so the consumer probes, devm_gpiod_get() returns -EPROBE_DEFER
and the consumer only binds once the provider shows up.
While at it: the existing gpio_unbind_with_consumers() test keeps the
consumer bound while the provider goes away and then operates the orphaned
descriptor. With software nodes now being covered by fw_devlink that would
instead force-unbind the consumer along with the provider, so opt it out
by setting FWNODE_FLAG_LINKS_ADDED.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: David Gow <david@davidgow.net>
Link: https://patch.msgid.link/20260720-swnode-fw-devlink-v5-1-ec250ae6af91@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
This is a stable tag for other trees to merge.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaleyHAAKCRBFlHeO1qrK
LkGKAP9isPMqr2WJTbS8I65WDErXk3z8741AGELlUAkn3M3sUwD/X9tCZcFdTy8e
u7EyxBvnXb9TemwJFJbQmCZju/6yngg=
=e78c
-----END PGP SIGNATURE-----
Merge tag 'swnode-7.3-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core into gpio/for-next
software node: provide support for fw_devlink
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
This is a stable tag for other trees to merge.
16-bit expander data is an __le16, use le16_to_cpu() to read it.
In the similar way use cpu_to_le16() to write __le16 value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: and Cc: stable?
Link: https://patch.msgid.link/20260715163944.1300616-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Add binding for Axiado AX3005 GPIO controller. So far, no changes
are known, so it can fall back to the cdns,gpio-r1p02 compatible.
Signed-off-by: Swark Yang <syang@axiado.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716-upstream-axiado-ax3005-upstream-v3-2-c429095143ec@axiado.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Replace the open-coded devm_request_mem_region() plus devm_ioremap()
sequence with a single devm_ioremap_resource() call on the BAR0 resource.
This reserves the region and maps it in one step, and maps the full BAR
length instead of a hardcoded 0x1000 (BAR0 on the bt848/878 is a 4KB
register block, so the mapped size is unchanged).
devm_ioremap_resource() returns an ERR_PTR() on failure, so check with
IS_ERR() and propagate PTR_ERR(). Drop the now-redundant error message,
as devm_ioremap_resource() already logs on every failure path. Since it
can return -EPROBE_DEFER, place it early.
Built for ARM (defconfig + CONFIG_GPIO_BT8XX) with LLVM=1;
drivers/gpio/gpio-bt8xx.o compiles cleanly.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260713232810.1144712-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Refactor the rohm-bd7182x7 MFD driver to use software nodes for
instantiating the gpio-keys child device, replacing the old
platform_data mechanism.
The power key's properties are now defined using software nodes and
property entries. The IRQ is passed as a resource attached to the
platform device.
This will allow dropping support for using platform data for configuring
gpio-keys in the future.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260611-rohm-software-nodes-v5-2-0244664a3b65@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Refactor the rohm-bd71828 MFD driver to use software nodes for
instantiating the gpio-keys child device, replacing the old
platform_data mechanism.
The power key's properties are now defined using software nodes and
property entries. The IRQ is passed as a resource attached to the
platform device.
This will allow dropping support for using platform data for configuring
gpio-keys in the future.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260611-rohm-software-nodes-v5-1-0244664a3b65@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
I've been working extensively on software nodes lately and introduced
some changes. Add myself as reviewer so that I can help review any new
proposed changes.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-4-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add a kunit test suite for fw_devlink support for software nodes.
Most cases call add_links() directly and inspect the resulting fwnode
supplier/consumer lists: a single reference, multiple references, a
reference to an unregistered node, a "remote-endpoint" reference and a
reference array. The last case is end-to-end - it registers real consumer
and supplier platform devices together with their drivers, adds the
consumer first and checks that fw_devlink defers its probe until the
supplier has been bound.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: David Gow <david@davidgow.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-3-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Software nodes can be used to describe supplier-consumer relationships
between devices they represent using reference property entries. Unlike
for OF-nodes, driver core cannot yet use these references to create a
probe order that avoids needless probe deferrals on missing providers.
Implement software_node_add_links() modelled on of_fwnode_add_links().
For every DEV_PROP_REF property we resolve each referenced supplier and
create an fwnode link from the node to it. The driver core later promotes
these to device links and defers the consumer until the suppliers are
ready.
There's no allowlist like the one DT needs - devicetree phandles appear
in plenty of non-supplier contexts, but a software node only carries a
reference property when its author explicitly points at another node, so
we treat every reference as an intentional supplier dependency and link
all of them. Graph "remote-endpoint" references are skipped for now: they
go 2-ways between endpoint nodes and would create graph cycles without
the port-parent lifting DT does via get_con_dev(). References to
suppliers that aren't registered yet and self-references are ignored.
fw_devlink resolves the supplier device through fwnode->dev but the core
only records the owning device on the primary fwnode. When the software
node is a device's secondary fwnode, mirror the device pointer onto it in
software_node_notify() so the consumer can actually find the supplier
instead of deferring forever.
While at it: purge the fwnode links in software_node_release() now that
software nodes can own them.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-2-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Provide three new kunit-managed helpers for test cases that need to
register/create dynamic software nodes.
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-1-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Don't populate the read-only const arrays regs on the stack at run
time, instead make them static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260714170258.186766-1-colin.i.king@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The GPIO_LOOKUP_SINGLE() macro defines a lookup table with a single entry
followed by an empty sentinel entry. The sentinel entry has a trailing
comma which is unnecessary. Remove it.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/alV0wIgZAY_InGYV@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
To avoid more false positive reports of "leaking memory" when
fops_buf_size_set() returns an error.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260712093148.21446-2-wsa+renesas@sang-engineering.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The Kinetic Technologies KTS1622 is a 16-bit general-purpose I/O
expander via the I2C bus for microcontrollers when additional I/Os
are needed while keeping interconnections to the minimum. Datasheet
comparison suggests that it is compatible with TCAL6416, add the
compatible string and TCAL6416 as a fallback compatible.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260711210131.236025-3-marex@nabladev.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260704122123.73004-1-pengpeng@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
GPIO software node lookup should rely exclusively on matching the
addresses of the referenced firmware nodes. Commit e5d527be7e ("gpio:
swnode: don't use the swnode's name as the key for GPIO lookup") tried to
enforce this but had to be reverted: it broke existing users who abused
the software node mechanism by creating "dummy" software nodes named
after the device they want to get GPIOs from, without ever attaching them
to the actual GPIO devices. Those users relied on GPIOLIB matching the
label of the GPIO controller against the name of the software node rather
than on a real firmware node link.
All such users have now been coverted to using attached software nodes
via the fwnode address lookup path and the kernel documentation has been
updated to recommend it as the correct approach. This allows us to remove
the old behavior.
This will allow us to leverage the upcoming support for fw_devlink for
software nodes in GPIO core.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260702-gpio-swnode-drop-label-matching-v2-1-0838349eb644@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704122230.75964-1-pengpeng@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
nonseekable_open() never fails, so the error check is unnecessary.
Remove the dead error handling path.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260703020947.8010-1-phucduc.bui@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
There is a mix of 'mediatek' and 'mt7621' mix of prefix in different
function names along the code of the driver. Be consistent using 'mt7621'
for all function prefixes.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-5-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
CPUs when Intel SNC (Sub-NUMA Clustering) is enabled
(Reinette Chatre)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mae/
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
- Prevent OOB access in the resctrl code while offlining
CPUs when Intel SNC (Sub-NUMA Clustering) is enabled
(Reinette Chatre)
* tag 'x86-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled
- Fix a perf_event_attr::remove_on_exec bug for group
events (Taeyang Lee)
- Fix uprobes CALL emulation interaction with shadow stacks,
and add a testcase for this (David Windsor)
- Fix uprobes unregister bug (Jiri Olsa)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Mb4z
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix a perf_event_attr::remove_on_exec bug for group events
(Taeyang Lee)
- Fix uprobes CALL emulation interaction with shadow stacks, and
add a testcase for this (David Windsor)
- Fix uprobes unregister bug (Jiri Olsa)
* tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
selftests/x86: Add shadow stack uprobe CALL test
x86/uprobes: Keep shadow stack in sync for emulated CALLs
perf/core: Detach event groups during remove_on_exec
- Fix a resource leak in the RISC-V imsic-early driver
(Haoxiang Li)
- Fix an OF node reference leak in the ARM gic-v3-its driver
(Yuho Choi)
- Fix a dangling handler function on module removal bug in
the TS-4800 ARM board irqchip driver (Qingshuang Fu)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aWLS
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Misc irqchip driver fixes:
- Fix a resource leak in the RISC-V imsic-early driver (Haoxiang Li)
- Fix an OF node reference leak in the ARM gic-v3-its driver (Yuho
Choi)
- Fix a dangling handler function on module removal bug in the
TS-4800 ARM board irqchip driver (Qingshuang Fu)"
* tag 'irq-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ts4800: Fix missing chained handler cleanup on remove
irqchip/gic-v3-its: Fix OF node reference leak
irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure
A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmpKCqgOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+lgBAAk83zPbT+2y7L7GewxT2QTwOj5WMudl6q9RBp
sDfT8sabkVGs68IoWBVijn6H8n7Jy9V9OVqm+I1j/53mcQl4haLiW+Uk0hcOlN1N
UOySZLQusv+UOM7eVOpfvfb+rdx0MiGOr3NZeFD5tyIfhcMjhJ0NRDFHUDu1W3YU
7BRCOqX1xchsYAnGEdI/otb1d2rEHlg4bRUYMqanfOO1mAayfd2kw3RkVlEF4dW9
+8SoVdxWNOueIuq1WWU3DI/nE5Lq0la3ZsHulKTVkfKW3wlBsFhbk5tbWPBC123o
odz71gpoM1wNM10ANWniJoZ3FlUSvKc2N3gJfKgYVp/EWSzFAp01BYpqm4JA8Iq7
EAX7vNj+4wA4HMZYg20vGaj9dekZ15jrro9Xy8sg1+8TSC377xIpXBo1WA470YrS
/B1UCvhhaYmao0tTTsChaDEcBI0OWgS+OagWDijPz8ASwskNOczVeBhE4HxgHidd
eq4IqXcK+qakTcNc6d8AdFdOog8PekUqE+ZaSPkrW7P/QIYKgWEAXfpu0f2IaK8k
3S15xQAg4dvkGAz4+vOWvZfJSP1P1xRabuSNftEgZk8UvlAoIwMZSuoB7uazt61n
4La6BdPHiY//qmco9rV310YHYQE6uISFEPgs0xxKAHWYeTNRfhACDClm8U905Jo2
LZH9c5g=
=eXcj
-----END PGP SIGNATURE-----
Merge tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models"
* tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rsnd: src: Add missing scu_supply clock to suspend/resume
Documentation: sound: tas675x: Fix temperature range and impedance documentation
ASoC: codecs: tas675x: Fix CHx temperature range register bit fields
ASoC: codecs: tas675x: use READ_ONCE for params to be used concurrently
ASoC: rsnd: adg: make rsnd_adg_clk_control() idempotent
ASoC: SOF: validate probe info element counts
ALSA: usx2y: us144mkii: fix work UAF on disconnect
ASoC: amd: yc: Add Alienware m15 R7 AMD to DMIC quirk table
ALSA: hda/realtek: Add quirk for HP Victus 16-e0xxx (88EE) to enable mute LED
MAINTAINERS: ASoC: SOF: add AMD reviewer for Sound Open Firmware
ASoC: codecs: lpass-va-macro: Fix LPASS Codec Version for SC7280
ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
