If a uAPSD service period ends with an MMPDU, we currently just
send that MMPDU, but it obviously won't get the EOSP bit set as
it doesn't have a QoS header. This contradicts the standard, so
add a QoS-nulldata frame after the MMPDU to properly terminate
the service period with a frame that has EOSP set.
Also fix a bug wrt. the TID for the MMPDU, it shouldn't be set
to 0 unconditionally but use the actual TID that was assigned.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Seventh bit of 8th byte of extended capabilities specifies wide
bandwidth support for TDLS links. Add this definition to ieee80211.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch converts the temporary buffer in spc_emulate_inquiry() to
use dynamically allocated memory, instead of local stack memory.
Also bump SE_INQUIRY_BUF up to 1024 bytes to be safe when handling
multiple large SCSI name descriptors for EVPD=0x83.
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Add infrastructure for referrals.
v2 changes:
- Fix unsigned long long division in core_alua_state_lba_dependent on
32-bit (Fengguang + Chen + Hannes)
- Fix compile warning in core_alua_state_lba_dependent (nab)
- Convert segment_* + sectors variables in core_alua_state_lba_dependent
to u64 (Hannes)
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Pablo Neira Ayuso says:
====================
nf_tables updates for net-next
The following patchset contains the following nf_tables updates,
mostly updates from Patrick McHardy, they are:
* Add the "inet" table and filter chain type for this new netfilter
family: NFPROTO_INET. This special table/chain allows IPv4 and IPv6
rules, this should help to simplify the burden in the administration
of dual stack firewalls. This also includes several patches to prepare
the infrastructure for this new table and a new meta extension to
match the layer 3 and 4 protocol numbers, from Patrick McHardy.
* Load both IPv4 and IPv6 conntrack modules in nft_ct if the rule is used
in NFPROTO_INET, as we don't certainly know which one would be used,
also from Patrick McHardy.
* Do not allow to delete a table that contains sets, otherwise these
sets become orphan, from Patrick McHardy.
* Hold a reference to the corresponding nf_tables family module when
creating a table of that family type, to avoid the module deletion
when in use, from Patrick McHardy.
* Update chain counters before setting the chain policy to ensure that
we don't leave the chain in inconsistent state in case of errors (aka.
restore chain atomicity). This also fixes a possible leak if it fails
to allocate the chain counters if no counters are passed to be restored,
from Patrick McHardy.
* Don't check for overflows in the table counter if we are just renaming
a chain, from Patrick McHardy.
* Replay the netlink request after dropping the nfnl lock to load the
module that supports provides a chain type, from Patrick.
* Fix chain type module references, from Patrick.
* Several cleanups, function renames, constification and code
refactorizations also from Patrick McHardy.
* Add support to set the connmark, this can be used to set it based on
the meta mark (similar feature to -j CONNMARK --restore), from
Kristian Evensen.
* A couple of fixes to the recently added meta/set support and nft_reject,
and fix missing chain type unregistration if we fail to register our
the family table/filter chain type, from myself.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The event trigger code that checks for callback triggers before and
after recording of an event has lots of flags checks. This code is
duplicated throughout the ftrace events, kprobes and system calls.
They all do the exact same checks against the event flags.
Added helper functions ftrace_trigger_soft_disabled(),
event_trigger_unlock_commit() and event_trigger_unlock_commit_regs()
that consolidated the code and these are used instead.
Link: http://lkml.kernel.org/r/20140106222703.5e7dbba2@gandalf.local.home
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For a relocatable kernel since it can be loaded at any place, there
is no any relation between the kernel start addr and the memstart_addr.
So we can't calculate the memstart_addr from kernel start addr. And
also we can't wait to do the relocation after we get the real
memstart_addr from device tree because it is so late. So introduce
a new function we can use to get the first memblock address and size
in a very early stage (before machine_init).
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
The Nomadik I2C is now configured from the device tree on all platforms
using this controller. Delete the platform data header and move the
definitions into the driver so it is all contained in one single file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The Nomadik I2C controller needs to have the slave set-up time
configured based off the clock used to drive the I2C bus block.
Currently this is done with static assignments assuming that the
block is clocked 48MHz which is pretty likely to be bug-prone.
Calculate the SLSU from the equation given in the datasheet
instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Introduce an xtables add-on for matching L2TP packets. Supports L2TPv2
and L2TPv3 over IPv4 and IPv6. As well as filtering on L2TP tunnel-id
and session-id, the filtering decision can also include the L2TP
packet type (control or data), protocol version (2 or 3) and
encapsulation type (UDP or IP).
The most common use for this will likely be to filter L2TP data
packets of individual L2TP tunnels or sessions. While a u32 match can
be used, the L2TP protocol headers are such that field offsets differ
depending on bits set in the header, making rules for matching generic
L2TP connections cumbersome. This match extension takes care of all
that.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We don't encode argument types into function names and since besides
nft_do_chain() there are only AF-specific versions, there is no risk
of confusion.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Minor nf_chain_type cleanups:
- reorder struct to plug a hoe
- rename struct module member to "owner" for consistency
- rename nf_hookfn array to "hooks" for consistency
- reorder initializers for better readability
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The chain type module reference handling makes no sense at all: we take
a reference immediately when the module is registered, preventing the
module from ever being unloaded.
Fix by taking a reference when we're actually creating a chain of the
chain type and release the reference when destroying the chain.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds kernel support for setting properties of tracked
connections. Currently, only connmark is supported. One use-case
for this feature is to provide the same functionality as
-j CONNMARK --save-mark in iptables.
Some restructuring was needed to implement the set op. The new
structure follows that of nft_meta.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
These sentences are not proper English due to the typos. I had initially caught
one of them while trying to understand the regmap feature, and then I just ran
the vim spell checker, and went through all the items that would need to be
fixed for this header file.
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add a utility function to get the number of channels supported by
the device, and update the places in the code that need this data.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
[replace another occurrence in libertas, fix kernel-doc, fix bugs]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Simplify vt-d related code with existing macros and introduce a new
macro for_each_active_drhd_unit() to enumerate all active DRHD unit.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Functions alloc_iommu() and parse_ioapics_under_ir()
are only used internally, so mark them as static.
[Joerg: Made detect_intel_iommu() non-static again for IA64]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function dmar_parse_dev_scope() should release the PCI device reference
count gained in function dmar_parse_one_dev_scope() on error recovery,
otherwise it will cause PCI device object leakage.
This patch also introduces dmar_free_dev_scope(), which will be used
to support DMAR device hotplug.
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
* qcom/drivers:
tty: serial: Limit msm_serial_hs driver to platforms that use it
mmc: msm_sdcc: Limit driver to platforms that use it
usb: phy: msm: Move mach dependent code to platform data
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch fix compilation error when driver is compiled
in multi-platform builds.
drivers/built-in.o: In function `msm_otg_link_clk_reset':
./drivers/usb/phy/phy-msm-usb.c:314: undefined reference to `clk_reset'
./drivers/usb/phy/phy-msm-usb.c:318: undefined reference to `clk_reset'
Use platform data supplied reset handlers and adjust error
messages reported when reset sequence fail.
This is an intermediate step before adding support for reset
framework and newer targets.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Nowadays we have CMA for obtaining the contiguous memory pages
efficiently. Let's kill the old kludge for reserving the memory pages
for large buffers. It was rarely useful (only for preserving pages
among module reloading or a little help by an early boot scripting),
used only by a couple of drivers, and yet it gives too much ugliness
than its benefit.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Revert the addition of SSI clocks to DT for the
r8a7790 (R-Car H2) and r8a7791 (R-Car M2) SoCs.
Unfortunately these patches prevent booting the
r8a7790-based Lager board and r8a7791-based Koelsch board
to the point where a serial output is available.
A solution to this problem is being sought but has not
yet been finalised so in the mean time revert the changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQIcBAABAgAGBQJSy1+EAAoJENfPZGlqN0++jeQP/2iOdEyu6u7MW0Sz/4qy8Ak/
7jPl1czO9zsaB2nKmWTyqDvXeBIUONkvNs01vKAcc0/62xQ1AhKllkoBXsWkM9DP
gdQCsIj/FJYpLY3+H/Nndd+lMFv+HKHxh6QJp+R5EI4e8h2LOhYvW18pfRTnNOfK
MDattpOgnu0PyK9mPLXGupxxMxlMku1+5XwCBrycule66Bm8vsG4IQK65jKnZA7w
ND+8rd2k5ARM1hOxtRCHo6rJ4u1C6WSWSt2p8R9pvDQTPZPbX+FYz1GZ3YkvQxf7
pud4AuJHnhIccapaEHXP2/e8xryP13UDBj3PuLedbfiaoiji34QcHbwHyQQVhWrY
rzezzAOFhbT3fhLbp3urcECPlXC0BuJgTzXcZrX8LjIPm9GGqSe9QyKTVCl3CJcp
9+nvtNUtzcC2RtGvt4fnYAxgIr+lETsR3EGyeC4lk4gVY5EnCmxUxn0Ku74qJr80
BweuVLlkCJ7L+5ul4NcQlXnOh3DKQMLp2X+xQBzoNUv9VheafUqs5e7glVOlbALZ
353LSp92Ru6sMTB8jcsQqTFWMeOMz0z4Zwi9TNzRpxn1g93CroM8p6dLdMpLFwuQ
EApzBGutQuoLYepEz0U1J022xsJMJ8tuHxMfxU/vqpVmSGRD3aFdgywihv9hzvrq
8s+xeBLTFrJa90R7HZU9
=pTPp
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-fixes-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
From Simon Horman:
Renesas ARM Based SoC DT Fixes for v3.14
Revert the addition of SSI clocks to DT for the
r8a7790 (R-Car H2) and r8a7791 (R-Car M2) SoCs.
Unfortunately these patches prevent booting the
r8a7790-based Lager board and r8a7791-based Koelsch board
to the point where a serial output is available.
A solution to this problem is being sought but has not
yet been finalised so in the mean time revert the changes.
* tag 'renesas-dt-fixes-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree"
Revert "ARM: shmobile: r8a7790: Add SSI clocks in device tree"
Signed-off-by: Olof Johansson <olof@lixom.net>
This patchset add new driver of extcon-max14577.c which detect various external
connector and fix minor issue of extcon provider driver(extcon-arizona/palams/
gpio.c). Also, update documentation of previous 'switch' porting guide and
extcon git repository url.
Detailed description for patchset:
- New driver of extcon-max14577.c
: Add extcon-max14577.c drvier to support Maxim MUIC(Micro USB Interface
Controller) which detect USB/TA/JIG/AUDIO-DOCK and additional accessory
according to each resistance when connected external connector.
- extcon-arizoan.c driver
: Code clean to use define macro instead of hex value
: Fix minor issue to reset back to our staring state
: Fix race with microphone detection and removal
- extcon-palmas.c driver
: Fix minor issue and renaming compatible string of Devicetree
- extcon-gpio.c driver
: Fix bug about ordering initialization of gpio pin on probe()
: Send uevent after wakeup from suspend state because some SoC
haven't wakeup interrupt on suspend state.
- Documentation (Documentation/extcon/porting-android-switch-class)
: Fix switch class porting guide
- Update extcon git repository url
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=eIUL
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for v3.14
This patchset add new driver of extcon-max14577.c which detect various external
connector and fix minor issue of extcon provider driver(extcon-arizona/palams/
gpio.c). Also, update documentation of previous 'switch' porting guide and
extcon git repository url.
Detailed description for patchset:
- New driver of extcon-max14577.c
: Add extcon-max14577.c drvier to support Maxim MUIC(Micro USB Interface
Controller) which detect USB/TA/JIG/AUDIO-DOCK and additional accessory
according to each resistance when connected external connector.
- extcon-arizoan.c driver
: Code clean to use define macro instead of hex value
: Fix minor issue to reset back to our staring state
: Fix race with microphone detection and removal
- extcon-palmas.c driver
: Fix minor issue and renaming compatible string of Devicetree
- extcon-gpio.c driver
: Fix bug about ordering initialization of gpio pin on probe()
: Send uevent after wakeup from suspend state because some SoC
haven't wakeup interrupt on suspend state.
- Documentation (Documentation/extcon/porting-android-switch-class)
: Fix switch class porting guide
- Update extcon git repository url
When system on the suspend state, Some SoC can't get gpio interrupt.
After system resume, need send extcon uevent to userspace.
Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
Reviewed-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Now that we've got code for raid5/6 stripe awareness, bcache just needs
to know about the stripes and when writing partial stripes is expensive
- we probably don't want to enable this optimization for raid1 or 10,
even though they have stripes. So add a flag to queue_limits.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
We need a reserve for allocating buckets for new btree nodes - and now that
we've got multiple btrees, it really needs to be per btree.
This reworks the reserves so we've got separate freelists for each reserve
instead of watermarks, which seems to make things a bit cleaner, and it adds
some code so that btree_split() can make sure the reserve is available before it
starts.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
The function kvm_io_bus_read_cookie is defined but never used
in current in-tree code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Running 'make namespacecheck' found lots of functions that
should be declared static, since only used in one file.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The AudioSS block on Exynos 5420 has an additional clock gate for the
ADMA bus clock.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
There is no gate for the PCM clock input to the AudioSS block, so
the parent of sclk_pcm is div_pcm0. Add a clock ID for it so that
we can reference it in device trees.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
The patch adds header file defining clock IDs.
This allows to use macros instead of magic numbers in DT bindings.
Signed-off-by: Andrzej Hajda <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
The patch adds header file defining clock IDs.
This allows to use macros instead of magic numbers in DT bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
The patch adds header file defining clock IDs.
This allows to use macros instead of magic numbers in DT bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
The patch adds header file defining clock IDs.
This allows to use macros instead of magic numbers in DT bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Use macro JUMP_LABEL_TRUE_BRANCH instead of hard-coding for better
readability.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Version 20131218.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This global is acting as an OSL global variable, implemented in the
oswinxf.c and osunixxf.c.
This patch cleans up the definition of this variable so that new utilities
do not need to define it in order to link.
Linux kernel behaviour is not affected as the changes only applies to the
ACPICA userspace utilities which are not shipped in the kernel currently.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch reflects the improvment of a cleanup step which is performed in
the release process.
There are still spaces in the "linuxized" ACPICA files after special macro
invocations. This is because indent treats comments and pre-processor
directives as spaces, thus we need to skip them.
Before applying this patch, cleanup code will search from keyword back to
end of line and wipe spaces between them.
After applying this patch, cleanup code will search to the end of the macro
invocations, skip "empty lines", "comments" and "pre-processor directives",
then wipe the spaces between the new line and the first non-spaces
characters.
Following improvements are thus achieved in the release automation by this
commit which are originally maintained manually:
- acpi_status acpi_ev_remove_global_lock_handler(void);
+acpi_status acpi_ev_remove_global_lock_handler(void);
- acpi_status
+acpi_status
acpi_ev_match_gpe_method(acpi_handle obj_handle,
- acpi_status acpi_subsystem_status(void);
+acpi_status acpi_subsystem_status(void);
- acpi_status acpi_install_notify_handler(acpi_handle device, u32 handler_type,
+acpi_status acpi_install_notify_handler(acpi_handle device, u32 handler_type,
- acpi_status
+acpi_status
acpi_acquire_mutex(acpi_handle handle, acpi_string pathname, u16 timeout);
- acpi_status
+acpi_status
acpi_get_sleep_type_data(u8 sleep_state, u8 *slp_typ_a, u8 *slp_typ_b);
- acpi_status acpi_leave_sleep_state_prep(u8 sleep_state);
+acpi_status acpi_leave_sleep_state_prep(u8 sleep_state);
Some empty lines are restored by this commit due to the change of the
removal implementation.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
