[ Upstream commit f699c66691 ]
Historically fpsimd_to_sve() and sve_to_fpsimd() were (conditionally)
called by functions which were defined regardless of CONFIG_ARM64_SVE.
Hence it was necessary that both fpsimd_to_sve() and sve_to_fpsimd()
were always defined and not guarded by ifdeffery.
As a result of the removal of fpsimd_signal_preserve_current_state() in
commit:
929fa99b12 ("arm64/fpsimd: signal: Always save+flush state early")
... sve_to_fpsimd() has no callers when CONFIG_ARM64_SVE=n, resulting in
a build-time warnign that it is unused:
| arch/arm64/kernel/fpsimd.c:676:13: warning: unused function 'sve_to_fpsimd' [-Wunused-function]
| 676 | static void sve_to_fpsimd(struct task_struct *task)
| | ^~~~~~~~~~~~~
| 1 warning generated.
In contrast, fpsimd_to_sve() still has callers which are defined when
CONFIG_ARM64_SVE=n, and it would be awkward to hide this behind
ifdeffery and/or to use stub functions.
For now, suppress the warning by marking both fpsimd_to_sve() and
sve_to_fpsimd() as 'static inline', as we usually do for stub functions.
The compiler will no longer warn if either function is unused.
Aside from suppressing the warning, there should be no functional change
as a result of this patch.
Link: https://lore.kernel.org/linux-arm-kernel/20250429194600.GA26883@willie-the-truck/
Reported-by: Will Deacon <will@kernel.org>
Fixes: 929fa99b12 ("arm64/fpsimd: signal: Always save+flush state early")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250430173240.4023627-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f101c56447 ]
When the 52-bit virtual addressing was introduced the select like
ARCH_MMAP_RND_BITS_MAX logic was never updated to account for it.
Because of that the rnd max bits knob is set to the default value of 18
when ARM64_VA_BITS=52.
Fix this by setting ARCH_MMAP_RND_BITS_MAX to the same value that would
be used if 48-bit addressing was used. Higher values can't used here
because 52-bit addressing is used only if the caller provides a hint to
mmap, with a fallback to 48-bit. The knob in question is an upper bound
for what the user can set in /proc/sys/vm/mmap_rnd_bits, which in turn
is used to determine how many random bits can be inserted into the base
address used for mmap allocations. Since 48-bit allocations are legal
with ARM64_VA_BITS=52, we need to make sure that the base address is
small enough to facilitate this.
Fixes: b6d00d47e8 ("arm64: mm: Introduce 52-bit Kernel VAs")
Signed-off-by: Kornel Dulęba <korneld@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250417114754.3238273-1-korneld@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ff37d29fd ]
Fix a reference counter leak in psci_dt_init() where of_node_put(np) was
missing after of_find_matching_node_and_match() when np is unavailable.
Fixes: d09a0011ec ("drivers: psci: Allow PSCI node to be disabled")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250318151712.28763-1-linmq006@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52ae3f5da7 ]
When booted on my Mac II, the kernel prints this:
Detected Macintosh model: 6
Apple Macintosh Unknown
The catch-all entry ("Unknown") is mac_data_table[0] which is only needed
in the unlikely event that the bootinfo model ID can't be matched.
When model ID is 6, the search should begin and end at mac_data_table[1].
Fix the off-by-one error that causes this problem.
Cc: Joshua Thompson <funaho@jurai.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/d0f30a551064ca4810b1c48d5a90954be80634a9.1745453246.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e28276a56 ]
The static initializer for struct watchdog_info::identity is too long
and gets initialized without a trailing NUL byte. Since the length
of "identity" is part of UAPI and tied to ioctls, just shorten
the name of the device. Avoids the warning seen with GCC 15's
-Wunterminated-string-initialization option:
drivers/watchdog/exar_wdt.c:224:27: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
224 | .identity = "Exar/MaxLinear XR28V38x Watchdog",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 81126222bd ("watchdog: Exar/MaxLinear XR28V38x driver")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250415225246.work.458-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b26c8c376 ]
The ntfs3 can use the page cache directly, so its address_space_operations
need direct_IO. Exit ntfs_direct_IO() if it is a compressed file.
Fixes: b432163ebd ("fs/ntfs3: Update inode->i_mapping->a_ops on compression state")
Reported-by: syzbot+e36cc3297bd3afd25e19@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e36cc3297bd3afd25e19
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af5cab0e5b ]
The hdr_first_de() function returns a pointer to a struct NTFS_DE. This
pointer may be NULL. To handle the NULL error effectively, it is important
to implement an error handler. This will help manage potential errors
consistently.
Additionally, error handling for the return value already exists at other
points where this function is called.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b848cd418a ]
If lt9611uxc_audio_init() fails, some resources still need to be released
before returning the error code.
Use the existing error handling path.
Fixes: 0cbbd5b1a0 ("drm: bridge: add support for lontium LT9611UXC bridge")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/f167608e392c6b4d7d7f6e45e3c21878feb60cbd.1744958833.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1eb7293ab ]
We never properly supported this panel and always used the wrong init
sequence. Drop support so we can move it to it's own proper driver.
Fixes: 5933baa36e ("drm/panel/samsung-sofef00: Add panel for OnePlus 6/T devices")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250419-drop-s6e3fc2x01-support-v1-1-05edfe0d27aa@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f57afde6a ]
When a resource allocation fails in one clock domain of an NI device,
we need to properly roll back all previously registered perf PMUs in
other clock domains of the same device.
Otherwise, it can lead to kernel panics.
Calling arm_ni_init+0x0/0xff8 [arm_ni] @ 2374
arm-ni ARMHCB70:00: Failed to request PMU region 0x1f3c13000
arm-ni ARMHCB70:00: probe with driver arm-ni failed with error -16
list_add corruption: next->prev should be prev (fffffd01e9698a18),
but was 0000000000000000. (next=ffff10001a0decc8).
pstate: 6340009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : list_add_valid_or_report+0x7c/0xb8
lr : list_add_valid_or_report+0x7c/0xb8
Call trace:
__list_add_valid_or_report+0x7c/0xb8
perf_pmu_register+0x22c/0x3a0
arm_ni_probe+0x554/0x70c [arm_ni]
platform_probe+0x70/0xe8
really_probe+0xc6/0x4d8
driver_probe_device+0x48/0x170
__driver_attach+0x8e/0x1c0
bus_for_each_dev+0x64/0xf0
driver_add+0x138/0x260
bus_add_driver+0x68/0x138
__platform_driver_register+0x2c/0x40
arm_ni_init+0x14/0x2a [arm_ni]
do_init_module+0x36/0x298
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops - BUG: Fatal exception
SMP: stopping secondary CPUs
Fixes: 4d5a7680f2 ("perf: Add driver for Arm NI-700 interconnect PMU")
Signed-off-by: Hongbo Yao <andy.xu@hj-micro.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250403070918.4153839-1-andy.xu@hj-micro.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ba64cf2f3 ]
When we clear the faulty bits in the AS mask, we also need to update
the panthor_mmu::irq::mask field otherwise our IRQ handler won't get
called again until the GPU is reset.
Changes in v2:
- Add Liviu's R-b
Changes in v3:
- Add Steve's R-b
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250404080933.2912674-4-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94f2f3261 ]
For backwards compatibility reasons, when a signal return occurs which
restores SVE state, the effective lower 128 bits of each of the SVE
vector registers are restored from the corresponding FPSIMD vector
register in the FPSIMD signal frame, overriding the values in the SVE
signal frame. This is intended to be the case regardless of streaming
mode.
To make this happen, restore_sve_fpsimd_context() uses
fpsimd_update_current_state() to merge the lower 128 bits from the
FPSIMD signal frame into the SVE register state. Unfortunately,
fpsimd_update_current_state() performs this merging dependent upon
TIF_SVE, which is not always correct for streaming SVE register state:
* When restoring non-streaming SVE register state there is no observable
problem, as the signal return code configures TIF_SVE and the saved
fp_type to match before calling fpsimd_update_current_state(), which
observes either:
- TIF_SVE set AND fp_type == FP_STATE_SVE
- TIF_SVE clear AND fp_type == FP_STATE_FPSIMD
* On systems which have SME but not SVE, TIF_SVE cannot be set. Thus the
merging will never happen for the streaming SVE register state.
* On systems which have SVE and SME, TIF_SVE can be set and cleared
independently of PSTATE.SM. Thus the merging may or may not happen for
streaming SVE register state.
As TIF_SVE can be cleared non-deterministically during syscalls
(including at the start of sigreturn()), the merging may occur
non-deterministically from the perspective of userspace.
This logic has been broken since its introduction in commit:
85ed24dad2 ("arm64/sme: Implement streaming SVE signal handling")
... at which point both fpsimd_signal_preserve_current_state() and
fpsimd_update_current_state() only checked TIF SVE. When PSTATE.SM==1
and TIF_SVE was clear, signal delivery would place stale FPSIMD state
into the FPSIMD signal frame, and signal return would not merge this
into the restored register state.
Subsequently, signal delivery was fixed as part of commit:
61da7c8e2a ("arm64/signal: Don't assume that TIF_SVE means we saved SVE state")
... but signal restore was not given a corresponding fix, and when
TIF_SVE was clear, signal restore would still fail to merge the FPSIMD
state into the restored SVE register state. The 'Fixes' tag did not
indicate that this had been broken since its introduction.
Fix this by merging the FPSIMD state dependent upon the saved fp_type,
matching what we (currently) do during signal delivery.
As described above, when backporting this commit, it will also be
necessary to backport commit:
61da7c8e2a ("arm64/signal: Don't assume that TIF_SVE means we saved SVE state")
... and prior to commit:
baa8515281 ("arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE")
... it will be necessary for fpsimd_signal_preserve_current_state() and
fpsimd_update_current_state() to consider both TIF_SVE and
thread_sm_enabled(¤t->thread), in place of the saved fp_type.
Fixes: 85ed24dad2 ("arm64/sme: Implement streaming SVE signal handling")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a90878f297 ]
An exec() is expected to reset all FPSIMD/SVE/SME state, and barring
special handling of the vector lengths, the state is expected to reset
to zero. This reset is handled in fpsimd_flush_thread(), which the core
exec() code calls via flush_thread().
When support was added for FPMR, no logic was added to
fpsimd_flush_thread() to reset the FPMR value, and thus it is
erroneously inherited across an exec().
Add the missing reset of FPMR.
Fixes: 203f2b95a8 ("arm64/fpsimd: Support FEAT_FPMR")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-9-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01098d893f ]
On system with SME, a thread's kernel FPSIMD state may be erroneously
clobbered during a context switch immediately after that state is
restored. Systems without SME are unaffected.
If the CPU happens to be in streaming SVE mode before a context switch
to a thread with kernel FPSIMD state, fpsimd_thread_switch() will
restore the kernel FPSIMD state using fpsimd_load_kernel_state() while
the CPU is still in streaming SVE mode. When fpsimd_thread_switch()
subsequently calls fpsimd_flush_cpu_state(), this will execute an
SMSTOP, causing an exit from streaming SVE mode. The exit from
streaming SVE mode will cause the hardware to reset a number of
FPSIMD/SVE/SME registers, clobbering the FPSIMD state.
Fix this by calling fpsimd_flush_cpu_state() before restoring the kernel
FPSIMD state.
Fixes: e92bee9f86 ("arm64/fpsimd: Avoid erroneous elide of user state reload")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-8-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5fa85fce0 ]
When the effective value of PSTATE.SM is changed from 0 to 1 or from 1
to 0 by any method, an entry or exit to/from streaming SVE mode is
performed, and hardware automatically resets a number of registers. As
of ARM DDI 0487 L.a, this means:
* All implemented bits of the SVE vector registers are set to zero.
* All implemented bits of the SVE predicate registers are set to zero.
* All implemented bits of FFR are set to zero, if FFR is implemented in
the new mode.
* FPSR is set to 0x0000_0000_0800_009f.
* FPMR is set to 0, if FPMR is implemented.
Currently task_fpsimd_load() restores FPMR before restoring SVCR (which
is an accessor for PSTATE.{SM,ZA}), and so the restored value of FPMR
may be clobbered if the restored value of PSTATE.SM happens to differ
from the initial value of PSTATE.SM.
Fix this by moving the restore of FPMR later.
Note: this was originally posted as [1].
Fixes: 203f2b95a8 ("arm64/fpsimd: Support FEAT_FPMR")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20241204-arm64-sme-reenable-v2-2-bae87728251d@kernel.org/
[ Rutland: rewrite commit message ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250409164010.3480271-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3eaab3c70 ]
The logic for handling SME traps manipulates saved FPSIMD/SVE/SME state
incorrectly, and a race with preemption can result in a task having
TIF_SME set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SME traps enabled). This can result in warnings from
do_sme_acc() where SME traps are not expected while TIF_SME is set:
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
This is very similar to the SVE issue we fixed in commit:
751ecf6afd ("arm64/sve: Discard stale CPU state when handling SVE traps")
The race can occur when the SME trap handler is preempted before and
after manipulating the saved FPSIMD/SVE/SME state, starting and ending on
the same CPU, e.g.
| void do_sme_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SME clear, SME traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
|
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| unsigned long vq_minus_one =
| sve_vq_from_vl(task_get_sme_vl(current)) - 1;
| sme_set_vq(vq_minus_one);
|
| fpsimd_bind_task_to_cpu();
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SME traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Note: this was originallly posted as [1].
Fixes: 8bd7f91c03 ("arm64/sme: Implement traps and syscall handling for SME")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20241204-arm64-sme-reenable-v2-1-bae87728251d@kernel.org/
[ Rutland: rewrite commit message ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95507570fb ]
The SME trap handler consumes RES0 bits from the ESR when determining
the reason for the trap, and depends upon those bits reading as zero.
This may break in future when those RES0 bits are allocated a meaning
and stop reading as zero.
For SME traps taken with ESR_ELx.EC == 0b011101, the specific reason for
the trap is indicated by ESR_ELx.ISS.SMTC ("SME Trap Code"). This field
occupies bits [2:0] of ESR_ELx.ISS, and as of ARM DDI 0487 L.a, bits
[24:3] of ESR_ELx.ISS are RES0. ESR_ELx.ISS itself occupies bits [24:0]
of ESR_ELx.
Extract the SMTC field specifically, matching the way we handle ESR_ELx
fields elsewhere, and ensuring that the handler is future-proof.
Fixes: 8bd7f91c03 ("arm64/sme: Implement traps and syscall handling for SME")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f270005b99 ]
The VIDIOC_ENUM_FRAMESIZES ioctl should return all frame sizes (i.e.
width and height in pixels) that the device supports for the given pixel
format.
It doesn't make a lot of sense to return the frame-sizes in a stepwise
manner, which is used to enforce hardware alignments requirements for
CAPTURE buffers, for coded formats.
Instead, applications should receive an indication, about the maximum
supported frame size for that hardware decoder, via a continuous
frame-size enumeration.
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Suggested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 820116a39f ]
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb5 ("drm/amd/pp: Use atombios api directly in powerplay (v2)")
Fixes: 5f92b48cf6 ("drm/amd/pm: add mc register table initialization")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e26a3740c ]
The vc4_mock_atomic_add_output() and vc4_mock_atomic_del_output() assert
that the functions they are calling didn't fail. Since some of them can
return EDEADLK, we can't properly deal with it.
Since both functions are expected to return an int, and all caller check
the return value, let's just properly propagate the errors when they
occur.
Fixes: f759f5b53f ("drm/vc4: tests: Introduce a mocking infrastructure")
Fixes: 76ec18dc5a ("drm/vc4: tests: Add unit test suite for the PV muxing")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-1-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f945dd89fa ]
According to pci core guidelines, pci_save_config is recommended when the
driver explicitly needs to set the pci power state. As of now xe kmd is
only doing pci_save_config while entering to s2idle/s3 state, which makes
pci core think that device driver has already applied required pci power
state. This leads to GPU remain in D0 state. To fix the issue setting
the pci power state to D3Cold.
Fixes:dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250327161914.432552-1-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f42c09e614 ]
Dumb buffers were not being freed because the GEM reference that was
acquired in gb_surface_define was not dropped like it is in the 2D case.
Dropping this ref uncovered a few additional issues with freeing the
resources associated with dirty tracking in vmw_bo_free/release.
Additionally the TTM object associated with the surface were also leaking
which meant that when the ttm_object_file was closed at process exit the
destructor unreferenced an already destroyed surface.
The solution is to remove the destructor from the vmw_user_surface
associated with the dumb_buffer and immediately unreferencing the TTM
object which his removes it from the ttm_object_file.
This also allows the early return in vmw_user_surface_base_release for the
dumb buffer case to be removed as it should no longer occur.
The chain of references now has the GEM handle(s) owning the dumb buffer.
The GEM handles have a singular GEM reference to the vmw_bo which is
dropped when all handles are closed. When the GEM reference count hits
zero the vmw_bo is freed which then unreferences the surface via
vmw_resource_release in vmw_bo_release.
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123204424.836896-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3282422bf2 ]
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index is already used. This fix introduces new
paths to handle the error.
This patch also aligns the order of function calls by calling
vmw_bo_add_detached_resource() before ttm_prime_object_init() in order
to allow consistent error handling.
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250225145223.34773-1-keisuke.nishimura@inria.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0039a3b35b ]
Because sync_files are passive waiters they do not participate in
the processing of fences like the traditional vmw_fence_wait IOCTL.
If userspace exclusively uses sync_files for synchronization then
nothing in the kernel actually processes fence updates as interrupts
for fences are masked and ignored if the kernel does not indicate to the
SVGA device that there are active waiters.
This oversight results in a bug where the entire GUI can freeze waiting
on a sync_file that will never be signalled as we've masked the interrupts
to signal its completion. This bug is incredibly racy as any process which
interacts with the fencing code via the 3D stack can process the stuck
fences on behalf of the stuck process causing it to run again. Even a
simple app like eglinfo is enough to resume the stuck process. Usually
this bug is seen at a login screen like GDM because there are no other
3D apps running.
By adding a seqno waiter we re-enable interrupt based processing of the
dma_fences associated with the sync_file which is signalled as part of a
dma_fence_callback.
This has likely been broken since it was initially added to the kernel in
2017 but has gone unnoticed until mutter recently started using sync_files
heavily over the course of 2024 as part of their explicit sync support.
Fixes: c906965dee ("drm/vmwgfx: Add export fence to file descriptor support")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228200633.642417-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62f134ab19 ]
In commit d69d804845 ("driver core: have match() callback in struct
bus_type take a const *"), the match bus callback was changed to have
the driver be a const pointer. Unfortunately that const attribute was
thrown away when container_of() is called, which is not correct and was
not caught by the compiler due to how container_of() is implemented.
Fix this up by correctly preserving the const attribute of the driver
passed to the bus match function which requires the hdac_driver match
function to also take a const pointer for the driver structure.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Fixes: d69d804845 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052204-hyphen-thermal-3e72@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e717c661e2 ]
We don't (and can't) configure the hardware correctly if the number of
channels exceeds the weight of the TDM mask. Report that constraint in
startup of FE.
Fixes: 3df5d0d972 ("ASoC: apple: mca: Start new platform driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250518-mca-fixes-v1-1-ee1015a695f6@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0941d51666 ]
The maximum amount of data to transfer in a single DMA request is
calculated from the FIFO sizes (which is technically not 100% correct,
but a simplification, as it is limited by the maximum word count values
in the Transmit and Control Data Registers). However, in case there is
both data to transmit and to receive, the transmit limit is overwritten
by the receive limit.
Fix this by using the minimum applicable FIFO size instead. Move the
calculation outside the loop, so it is not repeated for each individual
DMA transfer.
As currently tx_fifo_size is always equal to rx_fifo_size, this bug had
no real impact.
Fixes: fe78d0b769 ("spi: sh-msiof: Fix FIFO size to 64 word from 256 word")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d9961767a97758b2614f2ee8afe1bd56dc900a60.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cf4fdac9b ]
As specified in section 5.7.2 of the ACPI specification the feature
group string "3.0 _SCP Extensions" implies that the operating system
evaluates the _SCP control method with additional parameters.
However the ACPI thermal driver evaluates the _SCP control method
without those additional parameters, conflicting with the above
feature group string advertised to the firmware thru _OSI.
Stop advertising support for this feature string to avoid confusing
the ACPI firmware.
Fixes: e5f660ebef ("ACPI / osi: Collect _OSI handling into one single file")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20250410165456.4173-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b49825661a ]
When running the probe function for this driver, the function
lvts_debugfs_init() gets called in lvts_domain_init() which, in
turn, gets called in lvts_probe() before registering threaded
interrupt handlers.
Even though it's unlikely, the last call may fail and, if it does,
there's nothing removing the already created debugfs folder and
files.
In order to fix that, instead of calling the lvts debugfs cleanup
function upon failure, register a devm action that will take care
of calling that upon failure or driver removal.
Since devm was used, also delete the call to lvts_debugfs_exit()
in the lvts_remove() callback, as now that's done automatically.
Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250402083852.20624-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b17d4525b ]
Commit cdb8c100d8 ("include/linux/suspend.h: Only show pm_pr_dbg
messages at suspend/resume") caused PM debug messages to only be
printed during system-wide suspend and resume in progress, but it
forgot about hibernation.
Address this by adding a check for hibernation in progress to
pm_debug_messages_should_print().
Fixes: cdb8c100d8 ("include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4998903.GXAFRqVoOG@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 824c6384e8 ]
When suspending, save_processor_state() calls mtrr_save_fixed_ranges()
to save fixed-range MTRRs.
On platforms without fixed-range MTRRs like the ACRN hypervisor which
has removed fixed-range MTRR emulation, accessing these MSRs will
trigger an unchecked MSR access error. Make sure fixed-range MTRRs are
supported before access to prevent such error.
Since mtrr_state.have_fixed is only set when MTRRs are present and
enabled, checking the CPU feature flag in mtrr_save_fixed_ranges() is
unnecessary.
Fixes: 3ebad59056 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending")
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250509170633.3411169-2-jiaqing.zhao@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 113e042760 ]
The vendor name for MECHREVO was incorrectly spelled in commit
b53f09ecd6 ("ACPI: resource: Do IRQ override on MECHREV GM7XG0M").
Correct this typo in this trivial patch.
Fixes: b53f09ecd6 ("ACPI: resource: Do IRQ override on MECHREV GM7XG0M")
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://patch.msgid.link/20250417073947.47419-1-jeffbai@aosc.io
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0050a3e21 ]
pm_show_wakelocks() is called to generate a string when showing
attributes /sys/power/wake_(lock|unlock), but the string ends
with an unwanted space that was added back by mistake by commit
c9d967b2ce ("PM: wakeup: simplify the output logic of
pm_show_wakelocks()").
Remove the unwanted space.
Fixes: c9d967b2ce ("PM: wakeup: simplify the output logic of pm_show_wakelocks()")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20250505-fix_power-v1-1-0f7f2c2f338c@quicinc.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00a371adbb ]
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct snd_sof_pipeline **", but the returned type
will be "struct snd_sof_widget **". These are the same size allocation
(pointer size) but the types don't match. Adjust the allocation type to
match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Fixes: 9c04363d22 ("ASoC: SOF: Introduce struct snd_sof_pipeline")
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250426062511.work.859-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 179c0c7044 ]
When the device is of a non-CPU type, table[i].performance won't be
initialized in the previous em_init_performance(), resulting in division
by zero when calculating costs in em_compute_costs().
Since the 'cost' algorithm is only used for EAS energy efficiency
calculations and is currently not utilized by other device drivers, we
should add the _is_cpu_device(dev) check to prevent this division-by-zero
issue.
Fixes: 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove division")
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/tencent_7F99ED4767C1AF7889D0D8AD50F34859CE06@qq.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62d48983f2 ]
This patch adds a small optimization to the low-level at91_reset()
function, which includes:
- Removes the extra branch, since the following store operations
already have proper condition checks.
- Removes the definition of the clobber register r4, since it is
no longer used in the code.
Fixes: fcd0532fac ("power: reset: at91-reset: make at91sam9g45_restart() generic")
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250307053809.20245-1-eagle.alexander923@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8966b6541 ]
Modify the chip select (CS) deactivation and inter-transfer delay
execution only during the DATA_TRANSFER phase when the cs_change
flag is not set. This ensures proper CS handling and timing between
transfers while eliminating redundant operations.
Fixes: 1b8342cc4a ("spi: tegra210-quad: combined sequence mode")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20250416110606.2737315-4-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 400d9f1a27 ]
Remove unnecessary error handling code that terminated transfers and
executed delay on errors. This code was redundant as error handling is
already done at a higher level in the SPI core.
Fixes: 1b8342cc4a ("spi: tegra210-quad: combined sequence mode")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20250416110606.2737315-3-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcb06c638a ]
This patch corrects the QSPI_COMMAND_X1_X2_X4 and QSPI_ADDRESS_X1_X2_X4
macros to properly encode the bus width for x1, x2, and x4 transfers.
Although these macros were previously incorrect, they were not being
used in the driver, so no functionality was affected.
The patch updates tegra_qspi_cmd_config() and tegra_qspi_addr_config()
function calls to use the actual bus width from the transfer, instead of
hardcoding it to 0 (which implied x1 mode). This change enables proper
support for x1, x2, and x4 data transfers by correctly configuring the
interface width for commands and addresses.
These modifications improve the QSPI driver's flexibility and prepare it
for future use cases that may require different bus widths for commands
and addresses.
Fixes: 1b8342cc4a ("spi: tegra210-quad: combined sequence mode")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20250416110606.2737315-2-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeed3e03f4 ]
When enabling the retry_rd_err_log (RRL) feature during the loading of the
i10nm_edac driver with the module parameter retry_rd_err_log=2 (Linux RRL
control mode), the default values of the control bits of RRL are saved so
that they can be restored during the unloading of the driver.
In the current code, the RRL of pseudo channel 1 of HBM overwrites pseudo
channel 0 during the loading of the driver, resulting in the loss of saved
RRL for pseudo channel 0. This causes the RRL of pseudo channel 0 of HBM to
be wrongly restored with the values from pseudo channel 1 when unloading
the driver.
Fix this issue by creating two separate groups of RRL control registers
per channel to save default RRL settings of two {sub-,pseudo-}channels.
Fixes: acd4cf68fe ("EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Link: https://lore.kernel.org/r/20250417150724.1170168-3-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20d2d476b3 ]
After loading i10nm_edac (which automatically loads skx_edac_common), if
unload only i10nm_edac, then reload it and perform error injection testing,
a general protection fault may occur:
mce: [Hardware Error]: Machine check events logged
Oops: general protection fault ...
...
Workqueue: events mce_gen_pool_process
RIP: 0010:string+0x53/0xe0
...
Call Trace:
<TASK>
? die_addr+0x37/0x90
? exc_general_protection+0x1e7/0x3f0
? asm_exc_general_protection+0x26/0x30
? string+0x53/0xe0
vsnprintf+0x23e/0x4c0
snprintf+0x4d/0x70
skx_adxl_decode+0x16a/0x330 [skx_edac_common]
skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common]
skx_mce_check_error+0x17/0x20 [skx_edac_common]
...
The issue arose was because the variable 'adxl_component_count' (inside
skx_edac_common), which counts the ADXL components, was not reset. During
the reloading of i10nm_edac, the count was incremented by the actual number
of ADXL components again, resulting in a count that was double the real
number of ADXL components. This led to an out-of-bounds reference to the
ADXL component array, causing the general protection fault above.
Fix this issue by resetting the 'adxl_component_count' in adxl_put(),
which is called during the unloading of {skx,i10nm}_edac.
Fixes: 123b158635 ("EDAC, i10nm: make skx_common.o a separate module")
Reported-by: Feng Xu <feng.f.xu@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Link: https://lore.kernel.org/r/20250417150724.1170168-2-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd50f0e385 ]
IRQ handling was added in commit dae191fb95 ("ASoC: tas2764: Add IRQ
handling") however that same commit masks all interrupts coming from
the chip. Unmask the "main" interrupts so that we can see and
deal with a number of errors including clock, voltage, and current.
Fixes: dae191fb95 ("ASoC: tas2764: Add IRQ handling")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250406-apple-codec-changes-v5-4-50a00ec850a3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f8af0356a ]
The initial commit that introduced support for FFixedHW operation
regions did add a special case in the AcpiExReadSerialBus If, but
forgot to actually handle it inside the switch, so add the missing case
to prevent reads from failing with AE_AML_INVALID_SPACE_ID.
Link: https://github.com/acpica/acpica/pull/998
Fixes: ee64b827a9 ("ACPICA: Add support for FFH Opregion special context data")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Link: https://patch.msgid.link/20250401184312.599962-1-d-tatianin@yandex-team.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a3cf32da4 ]
When two crypto algorithm lookups occur at the same time with
different names for the same algorithm, e.g., ctr(aes-generic)
and ctr(aes), they will both be instantiated. However, only one
of them can be registered. The second instantiation will fail
with EEXIST.
Avoid failing the second lookup by making it retry, but only once
because there are tricky names such as gcm_base(ctr(aes),ghash)
that will always fail, despite triggering instantiation and EEXIST.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Fixes: 2825982d9d ("[CRYPTO] api: Added event notification")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
