In some cases the result of test were hidden inside the stdout and it
was difficult to identify when a test was skipped and why.
List of changes
1. Capitalize all the words that express a test result : "OK", "SKIPPED"
and "FAIL".
2. Place all test result text at the end of the message. This will
prevent the result from being hidden when stdout is verbose.
3. Any other explanation that comes after the result text will be placed
in a new line.
4. All failures are marked as "FAIL"
5. Pipped the failure to stderr in tests 8, 9, 10.
6. Replaced bogus "FAIL" with "SKIPPED" in test 0007
7. All "..." are prefixed and followed by a space.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Basic test to ensure that empty directories can be registered and that
they in turn can serve as a base dir for other registrations.
Add one test to the sysctl selftest module. It first registers an empty
directory under "empty_add" and then uses that as a base to register
another empty dir.
The sysctl bash script then checks that "empty_add" is present and that
there an empty directory within it.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
are not considered backporting material.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZYys4AAKCRDdBJ7gKXxA
jtmaAQC+o04Ia7IfB8MIqp1p7dNZQo64x/EnGA8YjUnQ8N6IwQD+ImU7dHl9g9Oo
ROiiAbtMRBUfeJRsExX/Yzc1DV9E9QM=
=ZGcs
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
or are not considered backporting material"
* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add an old address for Naoya Horiguchi
mm/memory-failure: cast index to loff_t before shifting it
mm/memory-failure: check the mapcount of the precise page
mm/memory-failure: pass the folio and the page to collect_procs()
selftests: secretmem: floor the memory size to the multiple of page_size
mm: migrate high-order folios in swap cache correctly
maple_tree: do not preallocate nodes for slot stores
mm/filemap: avoid buffered read/write race to read inconsistent data
kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
kexec: fix KEXEC_FILE dependencies
Since previous commit, MPTCP has support for IP_BIND_ADDRESS_NO_PORT and
IP_LOCAL_PORT_RANGE sockopts.
Add ip4_mptcp and ip6_mptcp fixture variants to ip_local_port_range
selftest to provide selftest coverage for these sockopts.
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a race condition in updating external interrupt for
trap-n-emulated IMSIC swfile
- Fix print_reg defaults in get-reg-list selftest
ARM:
- Ensure a vCPU's redistributor is unregistered from the MMIO bus
if vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
x86:
- Fix breakage for SEV-ES guests that use XSAVES.
Selftests:
- Fix bad use of strcat(), by not using strcat() at all
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWGFv0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPczAf/e6AgAnyPG1UItZqpLD+JDURcVaV1
QyP3kc240e9dEjEkGidQ8vyekgAU9nGt2rFNPaU+5Y1E5Ky+SpZbbIzgS1cZypxT
J1lsrVhZgNdCKEVRdrUMIzhkUEk0Kjd7OsFMQ9F6OuITSv/HCgZ1g6KobgBzUGCR
0vcYqM74VnZiGGd5A4w8qP2F0FmF/7tf9k6iKWoYu6UpFe9z50jpIRq6dynrOHOc
fmwsptmGzjgzuLK9sZTXYETOQvcpmXLqSZ65k1LQG224J5AYjS08Y5XLo1QS4rpV
/g8QAgi+9ChGSzC47fqr/solAsoz/NzALPqydy+FH4u+O/O4SG5I4V8OmA==
=4/NU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix a race condition in updating external interrupt for
trap-n-emulated IMSIC swfile
- Fix print_reg defaults in get-reg-list selftest
ARM:
- Ensure a vCPU's redistributor is unregistered from the MMIO bus if
vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
x86:
- Fix breakage for SEV-ES guests that use XSAVES
Selftests:
- Fix bad use of strcat(), by not using strcat() at all"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV: Do not intercept accesses to MSR_IA32_XSS for SEV-ES guests
KVM: selftests: Fix dynamic generation of configuration names
RISCV: KVM: update external interrupt atomically for IMSIC swfile
KVM: riscv: selftests: Fix get-reg-list print_reg defaults
KVM: selftests: Ensure sysreg-defs.h is generated at the expected path
KVM: Convert comment into an assertion in kvm_io_bus_register_dev()
KVM: arm64: vgic: Ensure that slots_lock is held in vgic_register_all_redist_iodevs()
KVM: arm64: vgic: Force vcpu vgic teardown on vcpu destroy
KVM: arm64: vgic: Add a non-locking primitive for kvm_vgic_vcpu_destroy()
KVM: arm64: vgic: Simplify kvm_vgic_destroy()
Some devices do not support individual 'pmac' and 'emac' stats.
For such devices, resort to 'aggregate' stats.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some devices have errata due to which they cannot report ETH_ZLEN (60)
in the rx-min-frag-size. This was foreseen of course, and lldpad has
logic that when we request it to advertise addFragSize 0, it will round
it up to the lowest value that is _actually_ supported by the hardware.
The problem is that the selftest expects lldpad to report back to us the
same value as we requested.
Make the selftest smarter by figuring out on its own what is a
reasonable value to expect.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a variable RUN_IN_NETNS if the user wants to run all the selected tests
in namespace in parallel. With this, we can save a lot of testing time.
Note that some tests may not fit to run in namespace, e.g.
net/drop_monitor_tests.sh, as the dwdump needs to be run in init ns.
I also added another parameter -p to make all the logs reported separately
instead of mixing them in the stdout or output.log.
Nit: the NUM in run_one is not used, rename it to test_num.
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh
Here is the test result after conversion.
# ./pmtu.sh
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
TEST: ipv6: PMTU exceptions [ OK ]
TEST: ipv6: PMTU exceptions - nexthop objects [ OK ]
...
TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv6: list and flush cached exceptions [ OK ]
TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv4: PMTU exception w/route replace [ OK ]
TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ]
TEST: ipv6: PMTU exception w/route replace [ OK ]
TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The setup_loopback and setup_veth use their own way to create namespace.
So let's just re-define server_ns/client_ns to unique name.
At the same time update the namespace name in gro.sh and toeplitz.sh.
As I don't have env to run toeplitz.sh. Here is only the gro test result.
# ./gro.sh
running test ipv4 data
Expected {200 }, Total 1 packets
Received {200 }, Total 1 packets.
...
Gro::large test passed.
All Tests Succeeded!
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
# ./xfrm_policy.sh
PASS: policy before exception matches
PASS: ping to .254 bypassed ipsec tunnel (exceptions)
PASS: direct policy matches (exceptions)
PASS: policy matches (exceptions)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies)
PASS: direct policy matches (exceptions and block policies)
PASS: policy matches (exceptions and block policies)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hresh changes)
PASS: direct policy matches (exceptions and block policies after hresh changes)
PASS: policy matches (exceptions and block policies after hresh changes)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hthresh change in ns3)
PASS: direct policy matches (exceptions and block policies after hthresh change in ns3)
PASS: policy matches (exceptions and block policies after hthresh change in ns3)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after htresh change to normal)
PASS: direct policy matches (exceptions and block policies after htresh change to normal)
PASS: policy matches (exceptions and block policies after htresh change to normal)
PASS: policies with repeated htresh change
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
# ./stress_reuseport_listen.sh
listen 24000 socks took 0.47714
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running the test in namespace, the debugfs may not load automatically.
So add a checking to make sure debugfs loaded. Here is the test result
after conversion.
# ./rtnetlink.sh
PASS: policy routing
PASS: route get
...
PASS: address proto IPv4
PASS: address proto IPv6
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test will move the device to netns 1. Add a new test_ns to do this.
Here is the test result after conversion.
# ./netns-name.sh
netns-name.sh [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
# ./gre_gso.sh
TEST: GREv6/v4 - copy file w/ TSO [ OK ]
TEST: GREv6/v4 - copy file w/ GSO [ OK ]
TEST: GREv6/v6 - copy file w/ TSO [ OK ]
TEST: GREv6/v6 - copy file w/ GSO [ OK ]
Tests passed: 4
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial fix for out-of-tree build that I wasn't testing previously:
1. Create a directory for library object files, fixes:
> gcc lib/kconfig.c -Wall -O2 -g -D_GNU_SOURCE -fno-strict-aliasing -I ../../../../../usr/include/ -iquote /tmp/kselftest/kselftest/net/tcp_ao/lib -I ../../../../include/ -o /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o -c
> Assembler messages:
> Fatal error: can't create /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o: No such file or directory
> make[1]: *** [Makefile:46: /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o] Error 1
2. Include $(KHDR_INCLUDES) that's exported by selftests/Makefile, fixes:
> In file included from lib/kconfig.c:6:
> lib/aolib.h:320:45: warning: ‘struct tcp_ao_add’ declared inside parameter list will not be visible outside of this definition or declaration
> 320 | extern int test_prepare_key_sockaddr(struct tcp_ao_add *ao, const char *alg,
> | ^~~~~~~~~~
...
3. While at here, clean-up $(KSFT_KHDR_INSTALL): it's not needed anymore
since commit f2745dc0ba ("selftests: stop using KSFT_KHDR_INSTALL")
4. Also, while at here, drop .DEFAULT_GOAL definition: that has a
self-explaining comment, that was valid when I made these selftests
compile on local v4.19 kernel, but not needed since
commit 8ce72dc325 ("selftests: fix headers_install circular dependency")
Fixes: cfbab37b3d ("selftests/net: Add TCP-AO library")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312190645.q76MmHyq-lkp@intel.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Ensure a vCPU's redistributor is unregistered from the MMIO bus
if vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZYCYmAAKCRCivnWIJHzd
FhU+AQDqIOIg3VMV+VjxhrG5aiHccq9o1mczO4LL9FQUO9AdYwD/SbTP4puBlfai
gOFQDuvJFogTwKmYPDO2jycp1ekTuQ0=
=RhfO
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 6.7, part #2
- Ensure a vCPU's redistributor is unregistered from the MMIO bus
if vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
Provide a callback function to the CDAT parser in order to parse the
Device Scoped Memory Affinity Structure (DSMAS). Each DSMAS structure
contains the DPA range and its associated attributes in each entry. See
the CDAT specification for details. The device handle and the DPA range
is saved and to be associated with the DSLBIS locality data when the
DSLBIS entries are parsed. The xarray is a local variable. When the
total path performance data is calculated and storred this xarray can be
discarded.
Coherent Device Attribute Table 1.03 2.1 Device Scoped memory Affinity
Structure (DSMAS)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319619355.2212653.2675953129671561293.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There are a handful of spelling mistakes in test messages in the
TCP-AIO selftests. Fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As there were bugs found with the ownership of eventfs dynamic file
creation. Add a test to test it.
It will remount tracefs with a different gid and check the ownership of
the eventfs directory, as well as the system and event directories. It
will also check the event file directories.
It then does a chgrp on each of these as well to see if they all get
updated as expected.
Then it remounts the tracefs file system back to the original group and
makes sure that all the updated files and directories were reset back to
the original ownership.
It does the same for instances that change the ownership of he instance
directory.
Note, because the uid is not reset by a remount, it is tested for every
file by switching it to a new owner and then back again.
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Apparently there were so many kids wishing bug fixes that made Santa
busy; here we have lots of fixes although it's a bit late.
But all changes are device-specific, hence it should be relatively
safe to apply.
Most of changes are for Cirrus codecs (for both ASoC and HD-audio),
while the remaining are fixes for TI codecs, HD-audio and USB-audio
quirks.
-----BEGIN PGP SIGNATURE-----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=KNH2
-----END PGP SIGNATURE-----
Merge tag 'sound-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Apparently there were so many kids wishing bug fixes that made Santa
busy; here we have lots of fixes although it's a bit late. But all
changes are device-specific, hence it should be relatively safe to
apply.
Most of changes are for Cirrus codecs (for both ASoC and HD-audio),
while the remaining are fixes for TI codecs, HD-audio and USB-audio
quirks"
* tag 'sound-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda: cs35l41: Only add SPI CS GPIO if SPI is enabled in kernel
ALSA: hda: cs35l41: Do not allow uninitialised variables to be freed
ASoC: fsl_sai: Fix channel swap issue on i.MX8MP
ASoC: hdmi-codec: fix missing report for jack initial status
ALSA: hda/realtek: Add quirks for ASUS Zenbook 2023 Models
ALSA: hda: cs35l41: Support additional ASUS Zenbook 2023 Models
ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models
ALSA: hda: cs35l41: Support additional ASUS Zenbook 2022 Models
ALSA: hda/realtek: Add quirks for ASUS ROG 2023 models
ALSA: hda: cs35l41: Support additional ASUS ROG 2023 models
ALSA: hda: cs35l41: Add config table to support many laptops without _DSD
ASoC: Intel: bytcr_rt5640: Add new swapped-speakers quirk
ASoC: Intel: bytcr_rt5640: Add quirk for the Medion Lifetab S10346
kselftest: alsa: fixed a print formatting warning
ALSA: usb-audio: Increase delay in MOTU M quirk
ASoC: tas2781: check the validity of prm_no/cfg_no
ALSA: hda/tas2781: select program 0, conf 0 by default
ALSA: hda/realtek: Add quirk for ASUS ROG GV302XA
ASoC: cs42l43: Don't enable bias sense during type detect
ASoC: Intel: soc-acpi-intel-mtl-match: Change CS35L56 prefixes to AMPn
...
The tests in the selftests should not have the exec permissions set. The
trace_marker.tc test accidentally was committed with the exec permission.
Set the permission to that file back to just read/write.
No functional nor code changes.
Link: https://lore.kernel.org/linux-trace-kernel/20231222112831.4c7fa500@gandalf.local.home/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add two tests to make sure that we cannot add a rule to a ruleset if the
rule's access rights that are not handled by the ruleset:
* fs: layout1.rule_with_unhandled_access
* net: mini.rule_with_unhandled_access
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231130093616.67340-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add two tests to make sure that we cannot add a rule with access
rights that are unknown:
* fs: layout0.rule_with_unknown_access
* net: mini.rule_with_unknown_access
Rename unknown_access_rights tests to ruleset_with_unknown_access .
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231130093616.67340-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
conntrack zones are heavily used by tools like openvswitch to run
multiple virtual "routers" on a single machine. In this context each
conntrack zone matches to a single router, thereby preventing
overlapping IPs from becoming issues.
In these systems it is common to operate on all conntrack entries of a
given zone, e.g. to delete them when a router is deleted. Previously this
required these tools to dump the full conntrack table and filter out the
relevant entries in userspace potentially causing performance issues.
To do this we reuse the existing CTA_ZONE attribute. This was previous
parsed but not used during dump and flush requests. Now if CTA_ZONE is
set we filter these operations based on the provided zone.
However this means that users that previously passed CTA_ZONE will
experience a difference in functionality.
Alternatively CTA_FILTER could have been used for the same
functionality. However it is not yet supported during flush requests and
is only available when using AF_INET or AF_INET6.
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Co-developed-by: Max Lamprecht <max.lamprecht@mail.schwarz>
Signed-off-by: Max Lamprecht <max.lamprecht@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Current release - regressions:
- bpf: syzkaller found null ptr deref in unix_bpf proto add
- eth: i40e: fix ST code value for clause 45
Previous releases - regressions:
- core: return error from sk_stream_wait_connect() if sk_wait_event() fails
- ipv6: revert remove expired routes with a separated list of routes
- wifi rfkill:
- set GPIO direction
- fix crash with WED rx support enabled
- bluetooth:
- fix deadlock in vhci_send_frame
- fix use-after-free in bt_sock_recvmsg
- eth: mlx5e: fix a race in command alloc flow
- eth: ice: fix PF with enabled XDP going no-carrier after reset
- eth: bnxt_en: do not map packet buffers twice
Previous releases - always broken:
- core:
- check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
- check dev->gso_max_size in gso_features_check()
- mptcp: fix inconsistent state on fastopen race
- phy: skip LED triggers on PHYs on SFP modules
- eth: mlx5e:
- fix double free of encap_header
- fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=sEmi
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and bpf.
Current release - regressions:
- bpf: syzkaller found null ptr deref in unix_bpf proto add
- eth: i40e: fix ST code value for clause 45
Previous releases - regressions:
- core: return error from sk_stream_wait_connect() if sk_wait_event()
fails
- ipv6: revert remove expired routes with a separated list of routes
- wifi rfkill:
- set GPIO direction
- fix crash with WED rx support enabled
- bluetooth:
- fix deadlock in vhci_send_frame
- fix use-after-free in bt_sock_recvmsg
- eth: mlx5e: fix a race in command alloc flow
- eth: ice: fix PF with enabled XDP going no-carrier after reset
- eth: bnxt_en: do not map packet buffers twice
Previous releases - always broken:
- core:
- check vlan filter feature in vlan_vids_add_by_dev() and
vlan_vids_del_by_dev()
- check dev->gso_max_size in gso_features_check()
- mptcp: fix inconsistent state on fastopen race
- phy: skip LED triggers on PHYs on SFP modules
- eth: mlx5e:
- fix double free of encap_header
- fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()"
* tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: check dev->gso_max_size in gso_features_check()
kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail
net/ipv6: Revert remove expired routes with a separated list of routes
net: avoid build bug in skb extension length calculation
net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean()
net: stmmac: fix incorrect flag check in timestamp interrupt
selftests: add vlan hw filter tests
net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
net: hns3: add new maintainer for the HNS3 ethernet driver
net: mana: select PAGE_POOL
net: ks8851: Fix TX stall caused by TX buffer overrun
ice: Fix PF with enabled XDP going no-carrier after reset
ice: alter feature support check for SRIOV and LAG
ice: stop trashing VF VSI aggregator node ID information
mailmap: add entries for Geliang Tang
mptcp: fill in missing MODULE_DESCRIPTION()
mptcp: fix inconsistent state on fastopen race
selftests: mptcp: join: fix subflow_send_ack lookup
net: phy: skip LED triggers on PHYs on SFP modules
bpf: Add missing BPF_LINK_TYPE invocations
...
Using page order for deciding what the size of the ring buffer sub buffers
are is exposing a bit too much of the implementation. Although the sub
buffers are only allocated in orders of pages, allow the user to specify
the minimum size of each sub-buffer via kilobytes like they can with the
buffer size itself.
If the user specifies 3 via:
echo 3 > buffer_subbuf_size_kb
Then the sub-buffer size will round up to 4kb (on a 4kb page size system).
If they specify:
echo 6 > buffer_subbuf_size_kb
The sub-buffer size will become 8kb.
and so on.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.809766769@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a self test that will write into the trace buffer with differ trace
sub buffer order sizes.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.520496304@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When mapping a file on overlayfs, the file stored in ->vm_file is a
backing file whose f_inode is on the underlying filesystem. We need to
verify that /proc/pid/maps contains numbers of the overlayfs file, but
not its backing file.
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://lore.kernel.org/r/20231214064439.1023011-2-avagin@google.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZYQVjgAKCRDbK58LschI
g/NfAP9xMBCASd22+KPu44FtPPO5DKcdG7hATXZMpb/cygF8GQEAojcZ4jztx42S
F1+4RPEoxrn31oVYdtEGFY9q85ruzgA=
=2XhN
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-12-21
Hi David, hi Jakub, hi Paolo, hi Eric,
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 5 day(s) which contain
a total of 4 files changed, 45 insertions(+).
The main changes are:
1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(),
from Jiri Olsa.
2) Fix another syzkaller-found issue which triggered a NULL pointer dereference
in BPF sockmap for unconnected unix sockets, from John Fastabend.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add missing BPF_LINK_TYPE invocations
bpf: sockmap, test for unconnected af_unix sock
bpf: syzkaller found null ptr deref in unix_bpf proto add
====================
Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
run_cmd_grep_fail should be used when expecting the cmd fail, or the ret
will be set to 1, and the total test return 1 when exiting. This would cause
the result report to fail if run via run_kselftest.sh.
Before fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
1
After fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
0
Fixes: 9c2a19f715 ("kselftest: rtnetlink.sh: add verbose flag")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test for reproducing the update_schemes_tried_{regions,bytes}
command-causing indefinite hang bug that fixed by commit 7d6fa31a2f
("mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions"),
to avoid mistakenly re-introducing the bug. Refer to the fix commit for
more details of the bug.
Link: https://lkml.kernel.org/r/20231212194810.54457-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest for verifying the accuracy of DAMON's access monitoring
functionality. The test starts a program of artificial access pattern,
monitor the access pattern using DAMON, and check if DAMON finds expected
amount of hot data region (working set size) with only acceptable error
rate.
Note that the acceptable error rate is set with only naive assumptions and
small number of tests. Hence failures of the test may not always mean
DAMON is broken. Rather than that, those could be a signal to better
understand the real accuracy level of DAMON in wider environments. Based
on further finding, we could optimize DAMON or adjust the expectation of
the test.
Link: https://lkml.kernel.org/r/20231212194810.54457-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement update_schemes_tried_bytes command of DAMON sysfs interface in
_damon_sysfs.py. It is not only making the update, but also read the
updated value from the sysfs interface and store it in the Kdamond python
objects so that the user of the module can easily get the value.
Link: https://lkml.kernel.org/r/20231212194810.54457-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend the tests-writing-purpose DAMON sysfs control module to support the
kdamonds start functionality.
Link: https://lkml.kernel.org/r/20231212194810.54457-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/damon: add Python-written DAMON functionality
tests", v2.
DAMON exports most of its functionality via its sysfs interface. Hence
most DAMON functionality tests could be implemented using the interface.
However, because the interfaces require simple but multiple operations for
many controls, writing all such tests from the scratch could be repetitive
and time consuming.
Implement a minimum DAMON sysfs control module, and a couple of DAMON
functionality tests using the control module. The first test is for
ensuring minimum accuracy of data access monitoring, and the second test
is for finding if a previously found and fixed bug is introduced again.
Note that the DAMON sysfs control module is only for avoiding duplicating
code in tests. For convenient and general control of DAMON, users should
use DAMON user-space tools that developed for the purpose, such as
damo[1].
[1] https://github.com/damonitor/damo
Patches Sequence
----------------
This patchset is constructed with five patches. The first three patches
implement a Python-written test implementation-purpose DAMON sysfs control
module. The implementation is incrementally done in the sequence of the
basic data structure (first patch) first, kdamonds start command (second
patch) next, and finally DAMOS tried bytes update command (third patch).
Then two patches for implementing selftests using the module follows. The
fourth patch implements a basic functionality test of DAMON for working
set estimation accuracy. Finally, the fifth patch implements a corner
case test for a previously found bug.
This patch (of 5):
Implement a python module for DAMON sysfs controls. The module is aimed
to be useful for writing DAMON functionality tests in future.
Nonetheless, this module is only representing a subset of DAMON sysfs
files. Following commits will implement more DAMON sysfs controls.
Link: https://lkml.kernel.org/r/20231212194810.54457-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231212194810.54457-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Avoid pointer type value compared with 0 to make code clear.
./tools/testing/radix-tree/maple.c:34142:15-16: WARNING comparing pointer to 0.
Link: https://lkml.kernel.org/r/20231208020450.7003-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7696
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add tests similar to the existing PMD-sized THP tests, but which operate
on memory backed by (PTE-mapped) multi-size THP. This reuses all the
existing infrastructure. If the test suite detects that multi-size THP is
not supported by the kernel, the new tests are skipped.
Link: https://lkml.kernel.org/r/20231207161211.2374093-11-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
do_run_with_thp() prepares (PMD-sized) THP memory into different states
before running tests. With the introduction of multi-size THP, we would
like to reuse this logic to also test those smaller THP sizes. So let's
add a thpsize parameter which tells the function what size THP it should
operate on.
A separate commit will utilize this change to add new tests for multi-size
THP, where available.
Link: https://lkml.kernel.org/r/20231207161211.2374093-10-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The `collapse_max_ptes_none` test was previously failing when a THP size
less than PMD-size had enabled="always". The root cause is because the
test faults in 1 page less than the threshold it set for collapsing. But
when THP is enabled always, we "over allocate" and therefore the threshold
is passed, and collapse unexpectedly succeeds.
Solve this by enlightening khugepaged selftest. Add a command line option
to pass in the desired THP size that should be used for all anonymous
allocations. The harness will then explicitly configure a THP size as
requested and modify the `collapse_max_ptes_none` test so that it faults
in the threshold minus the number of pages in the configured THP size. If
no command line option is provided, default to order 0, as per previous
behaviour.
I chose to use an order in the command line interface, since this makes
the interface agnostic of base page size, making it easier to invoke from
run_vmtests.sh.
Link: https://lkml.kernel.org/r/20231207161211.2374093-9-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Save and restore the new per-size hugepage enabled setting, if available
on the running kernel.
Since the number of per-size directories is not fixed, solve this as
simply as possible by catering for a maximum number in the thp_settings
struct (20). Each array index is the order. The value of THP_NEVER is
changed to 0 so that all of these new settings default to THP_NEVER and
the user only needs to fill in the ones they want to enable.
Link: https://lkml.kernel.org/r/20231207161211.2374093-8-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The khugepaged test has a useful framework for save/restore/pop/push of
all thp settings via the sysfs interface. This will be useful to
explicitly control multi-size THP settings in other tests, so let's move
it out of khugepaged and into its own thp_settings.[c|h] utility.
Link: https://lkml.kernel.org/r/20231207161211.2374093-7-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, the saved thp settings would be restored upon a signal or at
the natural end of the test suite. But there are some tests that directly
call exit() upon failure. In this case, the thp settings were not being
restored, which could then influence other tests.
Fix this by installing an atexit() handler to do the actual restore. The
signal handler can now just call exit() and the atexit handler is invoked.
Link: https://lkml.kernel.org/r/20231207161211.2374093-6-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "locked-in-memory size" limit per process can be non-multiple of
page_size. The mmap() fails if we try to allocate locked-in-memory with
same size as the allowed limit if it isn't multiple of the page_size
because mmap() rounds off the memory size to be allocated to next multiple
of page_size.
Fix this by flooring the length to be allocated with mmap() to the
previous multiple of the page_size.
This was getting triggered on KernelCI regularly because of different
ulimit settings which wasn't multiple of the page_size. Find logs
here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
The bug in was present from the time test was first added.
Link: https://lkml.kernel.org/r/20231214101931.1155586-1-usama.anjum@collabora.com
Fixes: 76fe17ef58 ("secretmem: test: add basic selftest for memfd_secret(2)")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Closes: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
