Here is the test result after conversion.
# ./fib_tests.sh
Single path route test
Start point
TEST: IPv4 fibmatch [ OK ]
...
Fib6 garbage collection test
TEST: ipv6 route garbage collection [ OK ]
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
Tests passed: 225
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-13-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_rule_tests.sh
TEST: rule6 check: oif redirect to table [ OK ]
...
TEST: rule4 dsfield tcp connect (dsfield 0x07) [ OK ]
Tests passed: 66
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-12-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove PEER_CMD, which is not used in this test
Here is the test result after conversion.
]# ./fib-onlink-tests.sh
Error: ipv4: FIB table does not exist.
Flush terminated
Error: ipv6: FIB table does not exist.
Flush terminated
########################################
Configuring interfaces
...
TEST: Gateway resolves to wrong nexthop device - VRF [ OK ]
Tests passed: 38
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-11-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_nexthops.sh
Basic functional tests
----------------------
TEST: List with nothing defined [ OK ]
TEST: Nexthop get on non-existent id [ OK ]
...
TEST: IPv6 resilient nexthop group torture test [ OK ]
Tests passed: 234
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-10-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_nexthop_nongw.sh
TEST: nexthop: get route with nexthop without gw [ OK ]
TEST: nexthop: ping through nexthop without gw [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-9-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv4: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv6: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv4: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv6: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-8-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running fib_nexthop_multiprefix test I saw all IPv6 test failed.
e.g.
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [FAIL]
With -v it shows
COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1
PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes
From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300
--- 2001:db8:101::1 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
Route get
2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium
Searching for:
2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300
The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will
not put RTA_SRC info. After fix:
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
Fixes: 735ab2f65d ("selftests: Add test with multiple prefixes using single nexthop")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-7-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion. There are some failures, but it
also exists on my system without this patch. So it's not affectec by
this patch and I will check the reason later.
]# time ./fcnal-test.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
IPv4 ping
###########################################################################
#################################################################
No VRF
SYSCTL: net.ipv4.raw_l3mdev_accept=0
TEST: ping out - ns-B IP [ OK ]
TEST: ping out, device bind - ns-B IP [ OK ]
TEST: ping out, address bind - ns-B IP [ OK ]
...
#################################################################
SNAT on VRF
TEST: IPv4 TCP connection over VRF with SNAT [ OK ]
TEST: IPv6 TCP connection over VRF with SNAT [ OK ]
Tests passed: 893
Tests failed: 21
real 52m48.178s
user 0m34.158s
sys 1m42.976s
BTW, this test needs a really long time. So expand the timeout to 1h.
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-6-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt6_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 18
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-5-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt4_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 18
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt46_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: IPv4 Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 34
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a global variable NS_LIST to store all the namespaces that setup_ns
created, so the caller could call cleanup_all_ns() instead of remember
all the netns names when using cleanup_ns().
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use both hex-based and string-based way to specify delegate mount
options for BPF FS.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231214225016.1209867-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit extends test_tunnel selftest to test the new XDP xfrm state
lookup kfunc.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/e704e9a4332e3eac7b458e4bfdec8fcc6984cdb6.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_progs is better than a shell script b/c C is a bit easier to
maintain than shell. Also it's easier to use new infra like memory
mapped global variables from C via bpf skeleton.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/a350db9e08520c64544562d88ec005a039124d9b.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
vmlinux.h declarations are more ergnomic, especially when working with
kfuncs. The uapi headers are often incomplete for kfunc definitions.
This commit also switches bitfield accesses to use CO-RE helpers.
Switching to vmlinux.h definitions makes the verifier very
unhappy with raw bitfield accesses. The error is:
; md.u.md2.dir = direction;
33: (69) r1 = *(u16 *)(r2 +11)
misaligned stack access off (0x0; 0x0)+-64+11 size 2
Fix by using CO-RE-aware bitfield reads and writes.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/884bde1d9a351d126a3923886b945ea6b1b0776b.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With previous patch, one of subtests in test_btf_id becomes
flaky and may fail. The following is a failing example:
Error: #26 btf
Error: #26/174 btf/BTF ID
Error: #26/174 btf/BTF ID
btf_raw_create:PASS:check 0 nsec
btf_raw_create:PASS:check 0 nsec
test_btf_id:PASS:check 0 nsec
...
test_btf_id:PASS:check 0 nsec
test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1
The test tries to prove a btf_id not available after the map is closed.
But btf_id is freed only after workqueue and a rcu grace period, compared
to previous case just after a rcu grade period.
Depending on system workload, workqueue could take quite some time
to execute function bpf_map_free_deferred() which may cause the test failure.
Instead of adding arbitrary delays, let us remove the logic to
check btf_id availability after map is closed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231214203820.1469402-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix test broken by shared umem test and framework enhancement commit.
Correct the current implementation of pkt_stream_replace_half() by
ensuring that nb_valid_entries are not set to half, as this is not true
for all the tests. Ensure that the expected value for valid_entries for
the SEND_RECEIVE_UNALIGNED test equals the total number of packets sent,
which is 4096.
Create a new function called pkt_stream_pkt_set() that allows for packet
modification to meet specific requirements while ensuring the accurate
maintenance of the valid packet count to prevent inconsistencies in packet
tracking.
Fixes: 6d198a89c0 ("selftests/xsk: Add a test for shared umem feature")
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231214130007.33281-1-tushar.vyavahare@intel.com
Add test to sockmap_basic to ensure af_unix sockets that are not connected
can not be added to the map. Ensure we keep DGRAM sockets working however
as these will not be connected typically.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231201180139.328529-3-john.fastabend@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Verify, whether VLAN tag and proto are set correctly.
To simulate "stripped" VLAN tag on veth, send test packet from VLAN
interface.
Also, add TO_STR() macro for convenience.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20231205210847.28460-19-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The easiest way to simulate stripped VLAN tag in veth is to send a packet
from VLAN interface, attached to veth. Unfortunately, this approach is
incompatible with AF_XDP on TX side, because VLAN interfaces do not have
such feature.
Check both packets sent via AF_XDP TX and regular socket.
AF_INET packet will also have a filled-in hash type (XDP_RSS_TYPE_L4),
unlike AF_XDP packet, so more values can be checked.
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231205210847.28460-18-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add VLAN hint to the xdp_hw_metadata program.
Also, to make metadata layout more straightforward, add flags field
to pass information about validity of every separate hint separately.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20231205210847.28460-17-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make VLAN c-tag and s-tag XDP hint testing more convenient
by not skipping VLAN-ed packets.
Allow both 802.1ad and 802.1Q headers.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20231205210847.28460-16-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test to validate libbpf's implicit BPF token creation from default
BPF FS location (/sys/fs/bpf). Also validate that disabling this
implicit BPF token creation works.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a few tests that attempt to load BPF object containing privileged
map, program, and the one requiring mandatory BTF uploading into the
kernel (to validate token FD propagation to BPF_BTF_LOAD command).
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add some tests that exercise BPF_CORE_WRITE_BITFIELD() macro. Since some
non-trivial bit fiddling is going on, make sure various edge cases (such
as adjacent bitfields and bitfields at the edge of structs) are
exercised.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/72698a1080fa565f541d5654705255984ea2a029.1702325874.git.dxu@dxuuu.xyz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This commit adds support for per-prog btf_custom_path. This is necessary
for testing CO-RE relocations on non-vmlinux types using test_loader
infrastructure.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/660ea7f2fdbdd5103bc1af87c9fc931f05327926.1702325874.git.dxu@dxuuu.xyz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When compiling BPF selftests with RELEASE=1, we get two new
warnings, which are treated as errors. Fix them.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231212225343.1723081-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When we dynamically generate a name for a configuration in get-reg-list
we use strcat() to append to a buffer allocated using malloc() but we
never initialise that buffer. Since malloc() offers no guarantees
regarding the contents of the memory it returns this can lead to us
corrupting, and likely overflowing, the buffer:
vregs: PASS
vregs+pmu: PASS
sve: PASS
sve+pmu: PASS
vregs+pauth_address+pauth_generic: PASS
X?vr+gspauth_addre+spauth_generi+pmu: PASS
The bug is that strcat() should have been strcpy(), and that replacement
would be enough to fix it, but there are other things in the function
that leave something to be desired. In particular, an (incorrectly)
empty config would cause an out of bounds access to c->name[-1].
Since the strcpy() call relies on c->name[0..len-1] being initialized,
enforce that invariant throughout the function.
Fixes: 2f9ace5d45 ("KVM: arm64: selftests: get-reg-list: Introduce vcpu configs")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Co-developed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-Id: <20231211-kvm-get-reg-list-str-init-v3-1-6554c71c77b1@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consistently testing system parameter access is a bit difficult by
nature -- the set of parameters available depends on the model and
system configuration, and updating a parameter should be considered a
destructive operation reserved for the admin.
So we validate some of the error paths and retrieve the SPLPAR
characteristics string, but not much else.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-13-e9eafd0c8c6c@linux.ibm.com
Add selftests for /dev/papr-vpd, exercising the common expected use
cases:
* Retrieve all VPD by passing an empty location code.
* Retrieve the "system VPD" by passing a location code derived from DT
root node properties, as done by the vpdupdate command.
The tests also verify that certain intended properties of the driver
hold:
* Passing an unterminated location code to PAPR_VPD_CREATE_HANDLE gets
EINVAL.
* Passing a NULL location code pointer to PAPR_VPD_CREATE_HANDLE gets
EFAULT.
* Closing the device node without first issuing a
PAPR_VPD_CREATE_HANDLE command to it succeeds.
* Releasing a handle without first consuming any data from it
succeeds.
* Re-reading the contents of a handle returns the same data as the
first time.
Some minimal validation of the returned data is performed.
The tests are skipped on systems where the papr-vpd driver does not
initialize, making this useful only on PowerVM LPARs at this point.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-12-e9eafd0c8c6c@linux.ibm.com
print_reg() will print everything it knows when it encounters
a register ID it's unfamiliar with in the default cases of its
decoding switches. Fix several issues with these (until now,
never tested) paths; missing newlines in printfs, missing
complement operator in mask, and missing return in order to
avoid continuing to decode.
Fixes: 62d0c458f8 ("KVM: riscv: selftests: get-reg-list print_reg should never fail")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
There is a selftest that checks if FPRs are corrupted across a fork, aka
clone. It was added as part of the series that optimised the clone path
to save the parent's FP state without "giving up" (turning off FP).
See commit 8792468da5 ("powerpc: Add the ability to save FPU without
giving it up").
The test encodes the assumption that FPRs 0-13 are volatile across the
syscall, by only checking the volatile FPRs are not changed by the fork.
There was also a comment in the fpu_preempt test alluding to that:
The check_fpu function in asm only checks the non volatile registers
as it is reused from the syscall test
It is true that the function call ABI treats f0-f13 as volatile,
however the syscall ABI has since been documented as *not* treating those
registers as volatile. See commit 7b8845a2a2 ("powerpc/64: Document
the syscall ABI").
So change the test to check all FPRs are not corrupted by the syscall.
Note that this currently fails, because save_fpu() etc. do not restore
f0/vsr0.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-5-mpe@ellerman.id.au
The FPU preempt test only runs for 20 seconds, which is not particularly
long. Run it for 60 seconds to increase the chance of detecting
corruption.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-4-mpe@ellerman.id.au
The fpu_preempt test randomly initialises an array of doubles to try and
detect FPU register corruption.
However the values it generates do not occupy the full range of values
possible in the 64-bit double, meaning some partial register corruption
could go undetected.
Without getting too carried away, add some better initialisation to
generate values that occupy more bits.
Sample values before:
f0 902677510 (raw 0x41cae6e203000000)
f1 325217596 (raw 0x41b3626d3c000000)
f2 1856578300 (raw 0x41dbaa48bf000000)
f3 1247189984 (raw 0x41d295a6f8000000)
And after:
f0 1.1078153481413311e-09 (raw 0x3e13083932805cc2)
f1 1.0576648474801922e+17 (raw 0x43777c20eb88c261)
f2 -6.6245033413594075e-10 (raw 0xbe06c2f989facae9)
f3 3.0085988827156291e+18 (raw 0x43c4e0585f2df37b)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-3-mpe@ellerman.id.au
There's a selftest that checks FPRs aren't corrupted by preemption, or
just process scheduling. However it only checks the non-volatile FPRs,
meaning corruption of the volatile FPRs could go undetected.
The check_fpu function it calls is used by several other tests, so for
now add a new routine to check all the FPRs. Increase the size of the
array of FPRs to 32, and initialise them all with random values.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-2-mpe@ellerman.id.au
The FPU & VMX preemption tests do not check for errors returned by the
low-level asm routines, preempt_fpu() / preempt_vsx() respectively.
That means any register corruption detected by the asm routines does not
result in a test failure.
Fix it by returning the return value of the asm routines from the
pthread child routines.
Fixes: e5ab8be68e ("selftests/powerpc: Test preservation of FPU and VMX regs across preemption")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-1-mpe@ellerman.id.au
This reverts commit 9fc96c7c19 ("selftests: error out if kernel header
files are not yet built").
It turns out that requiring the kernel headers to be built as a
prerequisite to building selftests, does not work in many cases. For
example, Peter Zijlstra writes:
"My biggest beef with the whole thing is that I simply do not want to use
'make headers', it doesn't work for me.
I have a ton of output directories and I don't care to build tools into
the output dirs, in fact some of them flat out refuse to work that way
(bpf comes to mind)." [1]
Therefore, stop erroring out on the selftests build. Additional patches
will be required in order to change over to not requiring the kernel
headers.
[1] https://lore.kernel.org/20231208221007.GO28727@noisy.programming.kicks-ass.net
Link: https://lkml.kernel.org/r/20231209020144.244759-1-jhubbard@nvidia.com
Fixes: 9fc96c7c19 ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Doing a ksft_print_msg() before the ksft_print_header() seems to confuse
the ksft framework in a strange way: running the test on the cmdline
results in the expected output.
But piping the output somewhere else, results in some odd output,
whereby we repeatedly get the same info printed:
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
Doing the ksft_print_header() first seems to resolve that and gives us
the output we expect:
TAP version 13
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
ok 2 No leak from parent into child
# [RUN] Basic COW after fork() ... with THP
ok 3 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped-out THP
ok 4 No leak from parent into child
# [RUN] Basic COW after fork() ... with PTE-mapped THP
ok 5 No leak from parent into child
Link: https://lkml.kernel.org/r/20231206103558.38040-1-david@redhat.com
Fixes: f4b5fd6946 ("selftests/vm: anon_cow: THP tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We're observing test flakiness on an arm64 platform which might not
have timestamps as precise as x86. The test log looks like:
test_time_tai:PASS:tai_open 0 nsec
test_time_tai:PASS:test_run 0 nsec
test_time_tai:PASS:tai_ts1 0 nsec
test_time_tai:PASS:tai_ts2 0 nsec
test_time_tai:FAIL:tai_forward unexpected tai_forward: actual 1702348135471494160 <= expected 1702348135471494160
test_time_tai:PASS:tai_gettime 0 nsec
test_time_tai:PASS:tai_future_ts1 0 nsec
test_time_tai:PASS:tai_future_ts2 0 nsec
test_time_tai:PASS:tai_range_ts1 0 nsec
test_time_tai:PASS:tai_range_ts2 0 nsec
#199 time_tai:FAIL
This patch changes ASSERT_GT to ASSERT_GE in the tai_forward assertion
so that equal timestamps are permitted.
Fixes: 64e15820b9 ("selftests/bpf: Add BPF-helper test for CLOCK_TAI access")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231212182911.3784108-1-zhuyifei@google.com
The memcg-zswap self test is updated to adjust to the behavior change
implemented by commit 87730b165089 ("zswap: make shrinking memcg-aware"),
where zswap performs writeback for specific memcg.
Link: https://lkml.kernel.org/r/20231130194023.4102148-6-nphamcs@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org> (Google)
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that the status of the maple state is outside of the node, the
mas_searchable() function can be dropped for easier open-coding of what is
going on.
Link: https://lkml.kernel.org/r/20231101171629.3612299-10-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Analysis of the mas_for_each() iteration showed that there is a
significant time spent finding the end of a node. This time can be
greatly reduced if the end of the node is cached in the maple state. Care
must be taken to update & invalidate as necessary.
Link: https://lkml.kernel.org/r/20231101171629.3612299-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
