Add a few positive/negative tests to test bpf_rcu_read_lock()
and its corresponding verifier support. The new test will fail
on s390x and aarch64, so an entry is added to each of their
respective deny lists.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221124053222.2374650-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify when a bond is configured with {up,down}delay and the link state
of slave members flaps if there are no remaining members up the bond
should immediately select a member to bring up. (from bonding.txt
section 13.1 paragraph 4)
Suggested-by: Liang Li <liali@redhat.com>
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add some selftest testcases that validate the expected behavior of the
bpf_task_from_pid() kfunc that was added in the prior patch.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221122145300.251210-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_cgroup_ancestor() allows BPF programs to access the ancestor of a
struct cgroup *. This patch adds selftests that validate its expected
behavior.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221122055458.173143-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a selftest suite to validate the cgroup kfuncs that were
added in the prior patch.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221122055458.173143-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently LLVM fails to recognize .data.* as data section and defaults to .text
section. Later BPF backend tries to emit 4-byte NOP instruction which doesn't
exist in BPF ISA and aborts.
The fix for LLVM is pending:
https://reviews.llvm.org/D138477
While waiting for the fix lets workaround the linked_list test case
by using .bss.* prefix which is properly recognized by LLVM as BSS section.
Fix libbpf to support .bss. prefix and adjust tests.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Install a cleanup function using the trap command for signals EXIT,
SIGINT, SIGQUIT and SIGABRT. The cleanup function will perform:
1. Online the CPUs that were made offline during the test.
2. Removing the cgroups created.
3. Restoring the original /sys/kernel/debug/sched/verbose value,
currently it's left turned on, irrespective of the original
configuration value.
the test performs steps 1 and 2, on the successful runs, but not during
all of the failed runs. With the cleanup(), the system will perform all
three steps during failed/passed test runs.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add checking of the test return value, otherwise it will report success
forever for test_create_read().
Fixes: dff6d2ae56 ("selftests/efivarfs: clean up test files from test_create*()")
Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The selftests/net does not have proper cross-compilation support, and
does not properly state libbpf as a dependency. Mimic/copy the BPF
build from selftests/bpf, which has the nice side-effect that libbpf
is built as well.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20221119171841.2014936-1-bjorn@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
LWT_XMIT to test L3 case, TC to test L2 case.
v2:
- s/veth_ifindex/ipip_ifindex/ in two places (Martin)
- add comment about which condition triggers the rejection (Martin)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221121180340.1983627-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Alexei hit another rcu warnings because of this test.
Making test_bench_attach serial so it does not disrupts
other tests during parallel tests run.
While this change is not the fix, it should be less likely
to hit it with this test being executed serially.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221116100228.2064612-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei hit following rcu warning when running prog_test -j.
[ 128.049567] WARNING: suspicious RCU usage
[ 128.049569] 6.1.0-rc2 #912 Tainted: G O
...
[ 128.050944] kprobe_multi_link_handler+0x6c/0x1d0
[ 128.050947] ? kprobe_multi_link_handler+0x42/0x1d0
[ 128.050950] ? __cpuidle_text_start+0x8/0x8
[ 128.050952] ? __cpuidle_text_start+0x8/0x8
[ 128.050958] fprobe_handler.part.1+0xac/0x150
[ 128.050964] 0xffffffffa02130c8
[ 128.050991] ? default_idle+0x5/0x20
[ 128.050998] default_idle+0x5/0x20
It's caused by bench test attaching kprobe_multi link to default_idle
function, which is not executed in rcu safe context so the kprobe
handler on top of it will trigger the rcu warning.
Filtering out default_idle function from the bench test.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221116100228.2064612-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update sk_storage_map_test to make sure kernel does not copy user
non-zero value spin lock to kernel, and does not copy kernel spin
lock value to user.
If user spin lock value is copied to kernel, this test case will
make kernel spin on the copied lock, resulting in rcu stall and
softlockup.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20221114134720.1057939-3-xukuohai@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test closes both iterator link fd and cgroup fd, and removes the
cgroup file to make a dead cgroup before reading from cgroup iterator.
It also uses kern_sync_rcu() and usleep() to wait for the release of
start cgroup. If the start cgroup is not pinned by cgroup iterator,
reading from iterator fd will trigger use-after-free.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20221121073440.1828292-4-houtao@huaweicloud.com
Add remove_cgroup() to remove a cgroup which doesn't have any children
or live processes. It will be used by the following patch to test cgroup
iterator on a dead cgroup.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221121073440.1828292-3-houtao@huaweicloud.com
The `nettest` binary, built from `selftests/net/nettest.c`,
was expected to be found in the path during test execution of
`fcnal-test.sh` and `pmtu.sh`, leading to tests getting
skipped when the binary is not installed in the system, as can
be seen in these logs found in the wild [1]:
# TEST: vti4: PMTU exceptions [SKIP]
[ 350.600250] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready
[ 350.607421] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready
# 'nettest' command not found; skipping tests
# xfrm6udp not supported
# TEST: vti6: PMTU exceptions (ESP-in-UDP) [SKIP]
[ 351.605102] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready
[ 351.612243] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready
# 'nettest' command not found; skipping tests
# xfrm4udp not supported
The `unicast_extensions.sh` tests also rely on `nettest`, but
it runs fine there because it looks for the binary in the
current working directory [2]:
The same mechanism that works for the Unicast extensions tests
is here copied over to the PMTU and functional tests.
[1] https://lkft.validation.linaro.org/scheduler/job/5839508#L6221
[2] https://lkft.validation.linaro.org/scheduler/job/5839508#L7958
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conform to the rest of Hyper-V emulation selftests which have 'hyperv'
prefix. Get rid of '_test' suffix as well as the purpose of this code
is fairly obvious.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-49-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable Hyper-V L2 TLB flush and check that Hyper-V TLB flush hypercalls
from L2 don't exit to L1 unless 'TlbLockCount' is set in the Partition
assist page.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-48-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable Hyper-V L2 TLB flush and check that Hyper-V TLB flush hypercalls
from L2 don't exit to L1 unless 'TlbLockCount' is set in the
Partition assist page.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-47-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V MSR-Bitmap tests do RDMSR from L2 to exit to L1. While 'evmcs_test'
correctly clobbers all GPRs (which are not preserved), 'hyperv_svm_test'
does not. Introduce a more generic rdmsr_from_l2() to avoid code
duplication and remove hardcoding of MSRs. Do not put it in common code
because it is really just a selftests bug rather than a processor
feature that requires it.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-46-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmmcall()/vmcall() are used to exit from L2 to L1 and no concrete hypercall
ABI is currenty followed. With the introduction of Hyper-V L2 TLB flush
it becomes (theoretically) possible that L0 will take responsibility for
handling the call and no L1 exit will happen. Prevent this by stuffing RAX
(KVM ABI) and RCX (Hyper-V ABI) with 'safe' values.
While on it, convert vmmcall() to 'static inline', make it setup stack
frame and move to include/x86_64/svm_util.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-45-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to pollute VMX and SVM code with Hyper-V specific
stuff and allocate Hyper-V specific test pages for all test as only
few really need them. Create a dedicated struct and an allocation
helper.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-43-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to putting Hyper-V specific test pages to a dedicated
struct, move eVMCS load logic from load_vmcs(). Tests call load_vmcs()
directly and the only one which needs 'enlightened' version is
evmcs_test so there's not much gain in having this merged.
Temporary pass both GPA and HVA to load_evmcs().
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-42-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V VP assist page is not eVMCS specific, it is also used for
enlightened nSVM. Move the code to vendor neutral place.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-41-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'struct hv_vp_assist_page' definition doesn't match TLFS. Also, define
'struct hv_nested_enlightenments_control' and use it instead of opaque
'__u64'.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-40-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'struct hv_enlightened_vmcs' definition in selftests is not '__packed'
and so we rely on the compiler doing the right padding. This is not
obvious so it seems beneficial to use the same definition as in kernel.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-39-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a selftest for Hyper-V PV TLB flush hypercalls
(HvFlushVirtualAddressSpace/HvFlushVirtualAddressSpaceEx,
HvFlushVirtualAddressList/HvFlushVirtualAddressListEx).
The test creates one 'sender' vCPU and two 'worker' vCPU which do busy
loop reading from a certain GVA checking the observed value. Sender
vCPU swaos the data page with another page filled with a different value.
The expectation for workers is also altered. Without TLB flush on worker
vCPUs, they may continue to observe old value. To guard against accidental
TLB flushes for worker vCPUs the test is repeated 100 times.
Hyper-V TLB flush hypercalls are tested in both 'normal' and 'XMM
fast' modes.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-38-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend the test to check the scenario when NCI core tries to send data
to already closed device to ensure that nothing bad happens.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Bongsu Jeon <bongsu.jeon@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Three tests are added. One is from John Fastabend ({1]) which tests
tracing style access for xdp program from the kernel ctx.
Another is a tc test to test both kernel ctx tracing style access
and explicit non-ctx type cast. The third one is for negative tests
including two tests, a tp_bpf test where the bpf_rdonly_cast()
returns a untrusted ptr which cannot be used as helper argument,
and a tracepoint test where the kernel ctx is a u64.
Also added the test to DENYLIST.s390x since s390 does not currently
support calling kernel functions in JIT mode.
[1] https://lore.kernel.org/bpf/20221109215242.1279993-1-john.fastabend@gmail.com/
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221120195442.3114844-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A previous change added a series of kfuncs for storing struct
task_struct objects as referenced kptrs. This patch adds a new
task_kfunc test suite for validating their expected behavior.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221120051004.3605026-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kfuncs currently support specifying the KF_TRUSTED_ARGS flag to signal
to the verifier that it should enforce that a BPF program passes it a
"safe", trusted pointer. Currently, "safe" means that the pointer is
either PTR_TO_CTX, or is refcounted. There may be cases, however, where
the kernel passes a BPF program a safe / trusted pointer to an object
that the BPF program wishes to use as a kptr, but because the object
does not yet have a ref_obj_id from the perspective of the verifier, the
program would be unable to pass it to a KF_ACQUIRE | KF_TRUSTED_ARGS
kfunc.
The solution is to expand the set of pointers that are considered
trusted according to KF_TRUSTED_ARGS, so that programs can invoke kfuncs
with these pointers without getting rejected by the verifier.
There is already a PTR_UNTRUSTED flag that is set in some scenarios,
such as when a BPF program reads a kptr directly from a map
without performing a bpf_kptr_xchg() call. These pointers of course can
and should be rejected by the verifier. Unfortunately, however,
PTR_UNTRUSTED does not cover all the cases for safety that need to
be addressed to adequately protect kfuncs. Specifically, pointers
obtained by a BPF program "walking" a struct are _not_ considered
PTR_UNTRUSTED according to BPF. For example, say that we were to add a
kfunc called bpf_task_acquire(), with KF_ACQUIRE | KF_TRUSTED_ARGS, to
acquire a struct task_struct *. If we only used PTR_UNTRUSTED to signal
that a task was unsafe to pass to a kfunc, the verifier would mistakenly
allow the following unsafe BPF program to be loaded:
SEC("tp_btf/task_newtask")
int BPF_PROG(unsafe_acquire_task,
struct task_struct *task,
u64 clone_flags)
{
struct task_struct *acquired, *nested;
nested = task->last_wakee;
/* Would not be rejected by the verifier. */
acquired = bpf_task_acquire(nested);
if (!acquired)
return 0;
bpf_task_release(acquired);
return 0;
}
To address this, this patch defines a new type flag called PTR_TRUSTED
which tracks whether a PTR_TO_BTF_ID pointer is safe to pass to a
KF_TRUSTED_ARGS kfunc or a BPF helper function. PTR_TRUSTED pointers are
passed directly from the kernel as a tracepoint or struct_ops callback
argument. Any nested pointer that is obtained from walking a PTR_TRUSTED
pointer is no longer PTR_TRUSTED. From the example above, the struct
task_struct *task argument is PTR_TRUSTED, but the 'nested' pointer
obtained from 'task->last_wakee' is not PTR_TRUSTED.
A subsequent patch will add kfuncs for storing a task kfunc as a kptr,
and then another patch will add selftests to validate.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221120051004.3605026-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
'size' is unsigned, it never less than zero.
Link: https://lkml.kernel.org/r/20221105110611.28920-1-yuehaibing@huawei.com
Fixes: 6c26df84e1 ("selftests: cgroup: return -errno from cg_read()/cg_write() on failure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: zefan li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add local_config.h and local_config.mk to .gitignore to avoid accidentally
checking it in.
Link: https://lkml.kernel.org/r/20221103005754.205420-1-zhaogongyi@huawei.com
Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
syscall(3) returns -1 and sets errno on error, unlike "syscall"
instruction.
Systems which have <= 32/64 CPUs are unaffected. Test won't bounce
to all CPUs before completing if there are more of them.
Link: https://lkml.kernel.org/r/Y1bUiT7VRXlXPQa1@p183
Fixes: 1f5bd05476 ("proc: selftests: test /proc/uptime")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of adding the whole test to DENYLIST.s390x, which also has
success test cases that should be run, just skip over failure test
cases in case the JIT does not support kfuncs.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118185938.2139616-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, tests can only request a new vaddr range by using
vm_vaddr_alloc()/vm_vaddr_alloc_page()/vm_vaddr_alloc_pages() but
these functions allocate and map physical pages too. Make it possible
to request unmapped range too.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-36-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to vm_vaddr_alloc(), virt_map() needs to reflect the mapping
in vm->vpages_mapped.
While on it, remove unneeded code wrapping in vm_vaddr_alloc().
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-35-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a selftest for Hyper-V PV IPI hypercalls
(HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx).
The test creates one 'sender' vCPU and two 'receiver' vCPU and then
issues various combinations of send IPI hypercalls in both 'normal'
and 'fast' (with XMM input where necessary) mode. Later, the test
checks whether IPIs were delivered to the expected destination vCPU[s].
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-34-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All Hyper-V specific tests issuing hypercalls need this.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-33-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HYPERV_LINUX_OS_ID needs to be written to HV_X64_MSR_GUEST_OS_ID by
each Hyper-V specific selftest.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-32-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
set_xmm()/get_xmm() helpers are fairly useless as they only read 64 bits
from 128-bit registers. Moreover, these helpers are not used. Borrow
_kvm_read_sse_reg()/_kvm_write_sse_reg() from KVM limiting them to
XMM0-XMM8 for now.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-31-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that KVM isn't littered with "struct hv_enlightenments" casts, rename
the struct to "hv_vmcb_enlightenments" to highlight the fact that the
struct is specifically for SVM's VMCB.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a union to provide hv_enlightenments side-by-side with the sw_reserved
bytes that Hyper-V's enlightenments overlay. Casting sw_reserved
everywhere is messy, confusing, and unnecessarily unsafe.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
