Hard-code the flds instruction and assert the exact instruction bytes
are present in run->emulation_failure. The test already requires the
instruction bytes to be present because that's the only way the test
will advance the RIP past the flds and get to GUEST_DONE().
Note that KVM does not necessarily return exactly 2 bytes in
run->emulation_failure since it may not know the exact instruction
length in all cases. So just assert that
run->emulation_failure.insn_size is at least 2.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221102184654.282799-3-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename emulator_error_test to smaller_maxphyaddr_emulation_test and
update the comment at the top of the file to document that this is
explicitly a test to validate that KVM emulates instructions in response
to an EPT violation when emulating a smaller MAXPHYADDR.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221102184654.282799-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In xapic_state_test's test_icr(), explicitly skip iterations that would
match vcpu->id instead of assuming vcpu->id is '0', so that IPIs are
are correctly sent to non-existent vCPUs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/YyoZr9rXSSMEtdh5@google.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Link: https://lore.kernel.org/r/20221017175819.12672-1-gautammenghani201@gmail.com
[sean: massage shortlog and changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add arch specific API kvm_arch_vm_post_create to perform any required setup
after VM creation.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Link: https://lore.kernel.org/r/20221115213845.3348210-4-vannapurve@google.com
[sean: place x86's implementation by vm_arch_vcpu_add()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Introduce arch specific API: kvm_selftest_arch_init to allow each arch to
handle initialization before running any selftest logic.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Link: https://lore.kernel.org/r/20221115213845.3348210-3-vannapurve@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Consolidate common startup logic in one place by implementing a single
setup function with __attribute((constructor)) for all selftests within
kvm_util.c.
This allows moving logic like:
/* Tell stdout not to buffer its content */
setbuf(stdout, NULL);
to a single file for all selftests.
This will also allow any required setup at entry in future to be done in
common main function.
Link: https://lore.kernel.org/lkml/Ywa9T+jKUpaHLu%2Fl@google.com
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Link: https://lore.kernel.org/r/20221115213845.3348210-2-vannapurve@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Play nice with huge pages when getting PTEs and translating GVAs to GPAs,
there's no reason to disallow using huge pages in selftests. Use
PG_LEVEL_NONE to indicate that the caller doesn't care about the mapping
level and just wants to get the pte+level.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006004512.666529-8-seanjc@google.com
Verify the parent PTE is PRESENT when getting a child via virt_get_pte()
so that the helper can be used for getting PTEs/GPAs without losing
sanity checks that the walker isn't wandering into the weeds.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006004512.666529-5-seanjc@google.com
Remove the pointless shift from GPA=>GFN and immediately back to
GFN=>GPA when creating guest page tables. Ignore the other walkers
that have a similar pattern for the moment, they will be converted
to use virt_get_pte() in the near future.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006004512.666529-4-seanjc@google.com
Drop the reserved bit checks from the helper to retrieve a PTE, there's
very little value in sanity checking the constructed page tables as any
will quickly be noticed in the form of an unexpected #PF. The checks
also place unnecessary restrictions on the usage of the helpers, e.g. if
a test _wanted_ to set reserved bits for whatever reason.
Removing the NX check in particular allows for the removal of the @vcpu
param, which will in turn allow the helper to be reused nearly verbatim
for addr_gva2gpa().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006004512.666529-3-seanjc@google.com
Drop vm_{g,s}et_page_table_entry() and instead expose the "inner"
helper (was _vm_get_page_table_entry()) that returns a _pointer_ to the
PTE, i.e. let tests directly modify PTEs instead of bouncing through
helpers that just make life difficult.
Opportunsitically use BIT_ULL() in emulator_error_test, and use the
MAXPHYADDR define to set the "rogue" GPA bit instead of open coding the
same value.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006004512.666529-2-seanjc@google.com
There is a spelling mistake in an assert message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20220928213458.64089-1-colin.i.king@gmail.com
[sean: fix an ironic typo in the changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
To play nice with guests whose stack memory is encrypted, e.g. AMD SEV,
introduce a new "ucall pool" implementation that passes the ucall struct
via dedicated memory (which can be mapped shared, a.k.a. as plain text).
Because not all architectures have access to the vCPU index in the guest,
use a bitmap with atomic accesses to track which entries in the pool are
free/used. A list+lock could also work in theory, but synchronizing the
individual pointers to the guest would be a mess.
Note, there's no need to rewalk the bitmap to ensure success. If all
vCPUs are simply allocating, success is guaranteed because there are
enough entries for all vCPUs. If one or more vCPUs are freeing and then
reallocating, success is guaranteed because vCPUs _always_ walk the
bitmap from 0=>N; if vCPU frees an entry and then wins a race to
re-allocate, then either it will consume the entry it just freed (bit is
the first free bit), or the losing vCPU is guaranteed to see the freed
bit (winner consumes an earlier bit, which the loser hasn't yet visited).
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-8-seanjc@google.com
Drop ucall_uninit() and ucall_arch_uninit() now that ARM doesn't modify
the host's copy of ucall_exit_mmio_addr, i.e. now that there's no need to
reset the pointer before potentially creating a new VM. The few calls to
ucall_uninit() are all immediately followed by kvm_vm_free(), and that is
likely always going to hold true, i.e. it's extremely unlikely a test
will want to effectively disable ucall in the middle of a test.
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-7-seanjc@google.com
Fix a mostly-theoretical bug where ARM's ucall MMIO setup could result in
different VMs stomping on each other by cloberring the global pointer.
Fix the most obvious issue by saving the MMIO gpa into the VM.
A more subtle bug is that creating VMs in parallel (on multiple tasks)
could result in a VM using the wrong address. Synchronizing a global to
a guest effectively snapshots the value on a per-VM basis, i.e. the
"global" is already prepped to work with multiple VMs, but setting the
global in the host is not thread-safe. To fix that bug, add
write_guest_global() to allow stuffing a VM's copy of a "global" without
modifying the host value.
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-6-seanjc@google.com
Do init_ucall() automatically during VM creation to kill two (three?)
birds with one stone.
First, initializing ucall immediately after VM creations allows forcing
aarch64's MMIO ucall address to immediately follow memslot0. This is
still somewhat fragile as tests could clobber the MMIO address with a
new memslot, but it's safe-ish since tests have to be conversative when
accounting for memslot0. And this can be hardened in the future by
creating a read-only memslot for the MMIO page (KVM ARM exits with MMIO
if the guest writes to a read-only memslot). Add a TODO to document that
selftests can and should use a memslot for the ucall MMIO (doing so
requires yet more rework because tests assumes thay can use all memslots
except memslot0).
Second, initializing ucall for all VMs prepares for making ucall
initialization meaningful on all architectures. aarch64 is currently the
only arch that needs to do any setup, but that will change in the future
by switching to a pool-based implementation (instead of the current
stack-based approach).
Lastly, defining the ucall MMIO address from common code will simplify
switching all architectures (except s390) to a common MMIO-based ucall
implementation (if there's ever sufficient motivation to do so).
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-4-seanjc@google.com
Consolidate the actual copying of a ucall struct from guest=>host into
the common get_ucall(). Return a host virtual address instead of a guest
virtual address even though the addr_gva2hva() part could be moved to
get_ucall() too. Conceptually, get_ucall() is invoked from the host and
should return a host virtual address (and returning NULL for "nothing to
see here" is far superior to returning 0).
Use pointer shenanigans instead of an unnecessary bounce buffer when the
caller of get_ucall() provides a valid pointer.
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-3-seanjc@google.com
Make ucall() a common helper that populates struct ucall, and only calls
into arch code to make the actually call out to userspace.
Rename all arch-specific helpers to make it clear they're arch-specific,
and to avoid collisions with common helpers (one more on its way...)
Add WRITE_ONCE() to stores in ucall() code (as already done to aarch64
code in commit 9e2f6498ef ("selftests: KVM: Handle compiler
optimizations in ucall")) to prevent clang optimizations breaking ucalls.
Cc: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-2-seanjc@google.com
Automatically disable single-step when the guest reaches the end of the
verified section instead of using an explicit ucall() to ask userspace to
disable single-step. An upcoming change to implement a pool-based scheme
for ucall() will add an atomic operation (bit test and set) in the guest
ucall code, and if the compiler generate "old school" atomics, e.g.
40e57c: c85f7c20 ldxr x0, [x1]
40e580: aa100011 orr x17, x0, x16
40e584: c80ffc31 stlxr w15, x17, [x1]
40e588: 35ffffaf cbnz w15, 40e57c <__aarch64_ldset8_sync+0x1c>
the guest will hang as the local exclusive monitor is reset by eret,
i.e. the stlxr will always fail due to the debug exception taken to EL2.
Link: https://lore.kernel.org/all/20221006003409.649993-8-seanjc@google.com
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221117002350.2178351-3-seanjc@google.com
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Disable single-step by setting debug.control to KVM_GUESTDBG_ENABLE,
not to SINGLE_STEP_DISABLE. The latter is an arbitrary test enum that
just happens to have the same value as KVM_GUESTDBG_ENABLE, and so
effectively disables single-step debug.
No functional change intended.
Cc: Reiji Watanabe <reijiw@google.com>
Fixes: b18e4d4aeb ("KVM: arm64: selftests: Add a test case for KVM_GUESTDBG_SINGLESTEP")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221117002350.2178351-2-seanjc@google.com
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
This tests PTRACE_SETREGSET with NT_X86_XSTATE modifying PKRU directly and
removing the PKRU bit from XSTATE_BV.
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-7-khuey%40kylehuey.com
Replace the perf_test_ prefix on symbol names with memstress_ to match
the new file name.
"memstress" better describes the functionality proveded by this library,
which is to provide functionality for creating and running a VM that
stresses VM memory by reading and writing to guest memory on all vCPUs
in parallel.
"memstress" also contains the same number of chracters as "perf_test",
making it a drop-in replacement in symbols, e.g. function names, without
impacting line lengths. Also the lack of underscore between "mem" and
"stress" makes it clear "memstress" is a noun.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221012165729.3505266-4-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename the local variables "pta" (which is short for perf_test_args) for
args. "pta" is not an obvious acronym and using "args" mirrors
"vcpu_args".
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221012165729.3505266-3-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename the perf_test_util.[ch] files to memstress.[ch]. Symbols are
renamed in the following commit to reduce the amount of churn here in
hopes of playiing nice with git's file rename detection.
The name "memstress" was chosen to better describe the functionality
proveded by this library, which is to create and run a VM that
reads/writes to guest memory on all vCPUs in parallel.
"memstress" also contains the same number of chracters as "perf_test",
making it a drop-in replacement in symbols, e.g. function names, without
impacting line lengths. Also the lack of underscore between "mem" and
"stress" makes it clear "memstress" is a noun.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221012165729.3505266-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Create the ability to randomize page access order with the -a
argument. This includes the possibility that the same pages may be hit
multiple times during an iteration or not at all.
Population has random access as false to ensure all pages will be
touched by population and avoid page faults in late dirty memory that
would pollute the test results.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221107182208.479157-5-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Randomize which pages are written vs read using the random number
generator.
Change the variable wr_fract and associated function calls to
write_percent that now operates as a percentage from 0 to 100 where X
means each page has an X% chance of being written. Change the -f
argument to -w to reflect the new variable semantics. Keep the same
default of 100% writes.
Population always uses 100% writes to ensure all memory is actually
populated and not just mapped to the zero page. The prevents expensive
copy-on-write faults from occurring during the dirty memory iterations
below, which would pollute the performance results.
Each vCPU calculates its own random seed by adding its index to the
seed provided.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221107182208.479157-4-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Create a -r argument to specify a random seed. If no argument is
provided, the seed defaults to 1. The random seed is set with
perf_test_set_random_seed() and must be set before guest_code runs to
apply.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221107182208.479157-3-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Implement random number generator for guest code to randomize parts
of the test, making it less predictable and a more accurate reflection
of reality.
The random number generator chosen is the Park-Miller Linear
Congruential Generator, a fancy name for a basic and well-understood
random number generator entirely sufficient for this purpose.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221107182208.479157-2-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a command line option, -c, to pin vCPUs to physical CPUs (pCPUs),
i.e. to force vCPUs to run on specific pCPUs.
Requirement to implement this feature came in discussion on the patch
"Make page tables for eager page splitting NUMA aware"
https://lore.kernel.org/lkml/YuhPT2drgqL+osLl@google.com/
This feature is useful as it provides a way to analyze performance based
on the vCPUs and dirty log worker locations, like on the different NUMA
nodes or on the same NUMA nodes.
To keep things simple, implementation is intentionally very limited,
either all of the vCPUs will be pinned followed by an optional main
thread or nothing will be pinned.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-8-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Many KVM selftests take command line arguments which are supposed to be
positive (>0) or non-negative (>=0). Some tests do these validation and
some missed adding the check.
Add atoi_positive() and atoi_non_negative() to validate inputs in
selftests before proceeding to use those values.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-7-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Change test args memslot_modification_delay and nr_memslot_modifications
to delay and nr_iterations for simplicity.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-6-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace size_1gb defined in max_guest_memory_test.c with the SZ_1G,
SZ_2G and SZ_4G from linux/sizes.h header file.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-5-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
atoi() doesn't detect errors. There is no way to know that a 0 return
is correct conversion or due to an error.
Introduce atoi_paranoid() to detect errors and provide correct
conversion. Replace all atoi() calls with atoi_paranoid().
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: David Matlack <dmatlack@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-4-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There are 13 command line options and they are not in any order. Put
them in alphabetical order to make it easy to add new options.
No functional change intended.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-3-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Passing -e option (Run VCPUs while dirty logging is being disabled) in
dirty_log_perf_test also unintentionally enables -g (Do not enable
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2). Add break between two switch case
logic.
Fixes: cfe12e64b0 ("KVM: selftests: Add an option to run vCPUs while disabling dirty logging")
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-2-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This initial code does a simple sample transfer tests. By default,
all PCM devices are detected and tested with short and long
buffering parameters for 4 seconds. If the sample transfer timing
is not in a +-100ms boundary, the test fails. Only the interleaved
buffering scheme is supported in this version.
The configuration may be modified with the configuration files.
A specific hardware configuration is detected and activated
using the sysfs regex matching. This allows to use the DMI string
(/sys/class/dmi/id/* tree) or any other system parameters
exposed in sysfs for the matching for the CI automation.
The configuration file may also specify the PCM device list to detect
the missing PCM devices.
v1..v2:
- added missing alsa-local.h header file
Cc: Mark Brown <broonie@kernel.org>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Cc: Liam Girdwood <liam.r.girdwood@intel.com>
Cc: Jesse Barnes <jsbarnes@google.com>
Cc: Jimmy Cheng-Yi Chiang <cychiang@google.com>
Cc: Curtis Malainey <cujomalainey@google.com>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221108115914.3751090-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enable unprivileged bpf for selftests kernel by default.
This forces CI to run test_verifier tests in both privileged
and unprivileged modes.
The test_verifier.c:do_test uses sysctl kernel.unprivileged_bpf_disabled
to decide whether to run or to skip test cases in unprivileged mode.
The CONFIG_BPF_UNPRIV_DEFAULT_OFF controls the default value of the
kernel.unprivileged_bpf_disabled.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20221116015456.2461135-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify that nullness information is porpagated in the branches of
register to register JEQ and JNE operations.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221115224859.2452988-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no point in failing the tests when RTC is not present.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Daniel Diaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Insert 3 programs to check that we are doing the correct thing:
'2', '1', '3' are inserted, but '1' is supposed to be executed first.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Simple report descriptor override in HID: replace part of the report
descriptor from a static definition in the bpf kernel program.
Note that this test should be run last because we disconnect/reconnect
the device, meaning that it changes the overall uhid device.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add tests for the newly implemented function.
We test here only the GET_REPORT part because the other calls are pure
HID protocol and won't infer the result of the test of the bpf hook.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use a different report with a bigger size and ensures we are doing
things properly.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The tests are pretty basic:
- create a virtual uhid device that no userspace will like (to not mess
up the running system)
- attach a BPF prog to it
- open the matching hidraw node
- inject one event and check:
* that the BPF program can do something on the event stream
* can modify the event stream
- add another test where we attach/detach BPF programs to see if we get
errors
Note: the Makefile is extracted from selftests/bpf so we can rebuild
the libbpf and bpftool components from the current kernel tree without
relying on system installed components.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently, verifier uses MEM_ALLOC type tag to specially tag memory
returned from bpf_ringbuf_reserve helper. However, this is currently
only used for this purpose and there is an implicit assumption that it
only refers to ringbuf memory (e.g. the check for ARG_PTR_TO_ALLOC_MEM
in check_func_arg_reg_off).
Hence, rename MEM_ALLOC to MEM_RINGBUF to indicate this special
relationship and instead open the use of MEM_ALLOC for more generic
allocations made for user types.
Also, since ARG_PTR_TO_ALLOC_MEM_OR_NULL is unused, simply drop it.
Finally, update selftests using 'alloc_' verifier string to 'ringbuf_'.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221114191547.1694267-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_cpuset_prs.sh is failing with the following error:
test_cpuset_prs.sh: line 29: [[: 8
57%: syntax error in expression (error token is "57%")
This is happening because `lscpu | grep "^CPU(s)"` returns two lines in
some systems (such as Debian unstable):
# lscpu | grep "^CPU(s)"
CPU(s): 8
CPU(s) scaling MHz: 55%
This is a simple fix that discard the second line.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In preparation for cxl_acpi walking pci_root->bus->bridge, add that
association to the mock pci_root instances.
Note that the missing 3rd entry in mock_pci_root[] was not noticed until
now given that the test version of to_cxl_host_bridge()
(tools/testing/cxl/mock_acpi.c), obviated the need for that entry.
However, "cxl/acpi: Improve debug messages in cxl_acpi_probe()" [1]
needs pci_root->bus->bridge to be populated.
Link: https://lore.kernel.org/r/20221018132341.76259-6-rrichter@amd.com [1]
Cc: Robert Richter <rrichter@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL dports are added in a couple of code paths using
devm_cxl_add_dport(). Debug messages are individually generated, but are
incomplete and inconsistent. Change this by moving its generation to
devm_cxl_add_dport(). This unifies the messages and reduces code
duplication. Also, generate messages on failure. Use a
__devm_cxl_add_dport() wrapper to keep the readability of the error
exits.
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20221018132341.76259-5-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
