This patch fixes a few typos, spelling mistakes, and a bit of grammar,
increasing the comments readability.
Signed-off-by: Janik Haag <janik@aq0.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250307145648.1679912-2-janik@aq0.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* Introduce devm_kmemdup_array() and convert Intel pin control drivers
* Update PWM handling for the cases when it's provided by Intel pin control
* Miscellaneous fixes, updates, and cleanups
The following is an automated git shortlog grouped by driver:
baytrail:
- copy communities using devm_kmemdup_array()
- Use dedicated helpers for chained IRQ handlers
cherryview:
- use devm_kmemdup_array()
devres:
- Introduce devm_kmemdup_array()
driver core:
- Split devres APIs to device/devres.h
err.h:
- move IOMEM_ERR_PTR() to err.h
iio:
- adc: xilinx-xadc-core: use devm_kmemdup_array()
- imu: st_lsm9ds0: Replace device.h with what is needed
input:
- ipaq-micro-keys: use devm_kmemdup_array()
- sparse-keymap: use devm_kmemdup_array()
intel:
- drop repeated config dependency
- copy communities using devm_kmemdup_array()
- Fix wrong bypass assignment in intel_pinctrl_probe_pwm()
- Import PWM_LPSS namespace for devm_pwm_lpss_probe()
lynxpoint:
- Use dedicated helpers for chained IRQ handlers
MAINTAINERS:
- Add pin control and GPIO to the Intel MID record
pwm:
- lpss: Clarify the bypass member semantics in struct pwm_lpss_boardinfo
- lpss: Actually use a module namespace by defining the namespace earlier
pxa2xx:
- use devm_kmemdup_array()
tangier:
- use devm_kmemdup_array()
-----BEGIN PGP SIGNATURE-----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=SG01
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.15-1
* Introduce devm_kmemdup_array() and convert Intel pin control drivers
* Update PWM handling for the cases when it's provided by Intel pin control
* Miscellaneous fixes, updates, and cleanups
The following is an automated git shortlog grouped by driver:
baytrail:
- copy communities using devm_kmemdup_array()
- Use dedicated helpers for chained IRQ handlers
cherryview:
- use devm_kmemdup_array()
devres:
- Introduce devm_kmemdup_array()
driver core:
- Split devres APIs to device/devres.h
err.h:
- move IOMEM_ERR_PTR() to err.h
iio:
- adc: xilinx-xadc-core: use devm_kmemdup_array()
- imu: st_lsm9ds0: Replace device.h with what is needed
input:
- ipaq-micro-keys: use devm_kmemdup_array()
- sparse-keymap: use devm_kmemdup_array()
intel:
- drop repeated config dependency
- copy communities using devm_kmemdup_array()
- Fix wrong bypass assignment in intel_pinctrl_probe_pwm()
- Import PWM_LPSS namespace for devm_pwm_lpss_probe()
lynxpoint:
- Use dedicated helpers for chained IRQ handlers
MAINTAINERS:
- Add pin control and GPIO to the Intel MID record
pwm:
- lpss: Clarify the bypass member semantics in struct pwm_lpss_boardinfo
- lpss: Actually use a module namespace by defining the namespace earlier
pxa2xx:
- use devm_kmemdup_array()
tangier:
- use devm_kmemdup_array()
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This also restores the check which got removed in 52732bb9ab
("fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()")
for performance reasons -- they no longer apply with a debug-only
variant.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250312161941.1261615-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
* A cleanup to remove unneeded ERR_CAST() in GPIO ACPI library
The following is an automated git shortlog grouped by driver:
gpiolib-acpi:
- Drop unneeded ERR_CAST() in __acpi_find_gpio()
-----BEGIN PGP SIGNATURE-----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=jUM9
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.15-1
* A cleanup to remove unneeded ERR_CAST() in GPIO ACPI library
The following is an automated git shortlog grouped by driver:
gpiolib-acpi:
- Drop unneeded ERR_CAST() in __acpi_find_gpio()
With the blamed commit it seems that lan966x doesn't seem to boot
anymore when the internal CPU is used.
The reason seems to be the usage of the devm_of_iomap, if we replace
this with devm_ioremap, this seems to fix the issue as we use the same
region also for other devices.
Fixes: 0426a920d6 ("reset: mchp: sparx5: Map cpu-syscon locally in case of LAN966x")
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250227105502.25125-1-horatiu.vultur@microchip.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The last_scheduled fence leaks when an entity is being killed and adding
the cleanup callback fails.
Decrement the reference count of prev when dma_fence_add_callback()
fails, ensuring proper balance.
Cc: stable@vger.kernel.org # v6.2+
[phasta: add git tag info for stable kernel]
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: qianyi liu <liuqianyi125@gmail.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311060251.4041101-1-liuqianyi125@gmail.com
We use a notifier to implement the mechanism of informing the user-space
about changes in GPIO line status. We register with the notifier when
the GPIO character device file is opened and unregister when the last
reference to the associated file descriptor is dropped.
Since commit fcc8b637c5 ("gpiolib: switch the line state notifier to
atomic") we use the atomic notifier variant. Atomic notifiers call
rcu_synchronize in atomic_notifier_chain_unregister() which caused a
significant performance regression in some circumstances, observed by
user-space when calling close() on the GPIO device file descriptor.
Replace the atomic notifier with the raw variant and provide
synchronization with a read-write spinlock.
Fixes: fcc8b637c5 ("gpiolib: switch the line state notifier to atomic")
Reported-by: David Jander <david@protonic.nl>
Closes: https://lore.kernel.org/all/20250311110034.53959031@erd003.prtnl/
Tested-by: David Jander <david@protonic.nl>
Tested-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20250311-gpiolib-line-state-raw-notifier-v2-1-138374581e1e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
During chip registration we should neither check the return value of
gc->get_direction() nor hold the SRCU lock when calling it. The former
is because pin controllers may have pins set to alternate functions and
return errors from their get_direction() callbacks. That's alright - we
should default to the safe INPUT state and not bail-out. The latter is
not needed because we haven't registered the chip yet so there's nothing
to protect against dynamic removal. In fact: we currently hit a lockdep
splat. Revert to calling the gc->get_direction() callback directly and
*not* checking its value.
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/81f890fc-6688-42f0-9756-567efc8bb97a@samsung.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-1-c8dc57182441@linaro.org
Tested-by: Gene C <arch@sapience.com>
Link: https://lore.kernel.org/r/20250311175631.83779-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add System Controller Firmware(SCU) reset driver for i.MX8QM and i.MX8QXP.
SCU Manage resets for peripherals such as MIPI CSI. Currently, support two
reset sources: IMX_SC_R_CSI_0 and IMX_SC_R_CSI_1.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250210-8qxp_camera-v3-2-324f5105accc@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
System Controller Firmware(SCU) reset some peripherals, such as CSI. So add
reset-controller for it.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250210-8qxp_camera-v3-1-324f5105accc@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Do a simple bounds check to avoid this on new gcc versions:
31 15.81 fedora:rawhide : FAIL gcc version 15.0.1 20250225 (Red Hat 15.0.1-0) (GCC)
In function 'callchain__fprintf_left_margin',
inlined from 'callchain__fprintf_graph.constprop' at ui/stdio/hist.c:246:12:
ui/stdio/hist.c:27:39: error: iteration 2147483647 invokes undefined behavior [-Werror=aggressive-loop-optimizations]
27 | for (i = 0; i < left_margin; i++)
| ~^~
ui/stdio/hist.c:27:23: note: within this loop
27 | for (i = 0; i < left_margin; i++)
| ~~^~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250310194534.265487-4-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
No need to specify the array size, let the compiler figure that out.
This addresses this compiler warning that was noticed while build
testing on fedora rawhide:
31 15.81 fedora:rawhide : FAIL gcc version 15.0.1 20250225 (Red Hat 15.0.1-0) (GCC)
util/units.c: In function 'unit_number__scnprintf':
util/units.c:67:24: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-initialization]
67 | char unit[4] = "BKMG";
| ^~~~~~
cc1: all warnings being treated as errors
Fixes: 9808143ba2 ("perf tools: Add unit_number__scnprintf function")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250310194534.265487-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Most systems get this indirectly, but some odd cases (some musl libc
systems) can't find it, so just add the header where NAME_MAX is defined
to avoid that.
Fixes: d118b08f7e ("tools lib api: Add io_dir an allocation free readdir alternative")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250310194534.265487-2-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Sometimes it's useful to see both instructions and their data type
together. Let's extend the annotate code to use data type profiling
functions.
To make it easy to pass more argument, introduce a struct to carry
necessary information together. Also add a new annotation_option called
'code_with_type' to control the behavior. This is not enabled yet but
it'll be set later from the command line.
For simplicity, this is implemented for --stdio only.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250310224925.799005-7-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
So that it can only handle a single disasm_linme and hopefully make the
code simpler. This is also a preparation to be called from different
places later.
The NO_TYPE macro was added to distinguish when it failed or needs retry.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250310224925.799005-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It's a prepartion to support code annotation and data type
annotation at the same time. Data type annotation needs more
information in the hist_entry so it needs to be passed deeper.
Also rename a function with the same name in the builtin-annotate.c
to hist_entry__stdio_annotate since it matches better to the command
line option. And change the condition inside to be simpler.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250310224925.799005-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The annotation_line__print() has many arguments. But min_percent,
max_lines and percent_type are from struct annotaion_options. So let's
pass a pointer to the option instead of passing them separately to
reduce the number of function arguments.
Actually it has a recursive call if 'queue' is set. Add a new option
instance to pass different values for the case.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250310224925.799005-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Factor out a function to get the name of member field at the given
offset. This will be used in other places.
Also update the output of typeoff sort key a little bit. As we know
that some special types like (stack operation), (stack canary) and
(unknown) won't have fields, skip printing the offset and field.
For example, the following change is expected.
"(stack operation) +0 (no field)" ==> "(stack operation)"
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250310224925.799005-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This reverts commit f590308536 ("timer debug: Hide kernel addresses via
%pK in /proc/timer_list")
The timer list helper SEQ_printf() uses either the real seq_printf() for
procfs output or vprintk() to print to the kernel log, when invoked from
SysRq-q. It uses %pK for printing pointers.
In the past %pK was prefered over %p as it would not leak raw pointer
values into the kernel log. Since commit ad67b74d24 ("printk: hash
addresses printed with %p") the regular %p has been improved to avoid this
issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping looks in atomic contexts.
Switch to the regular pointer formatting which is safer, easier to reason
about and sufficient here.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Link: https://lore.kernel.org/all/20250311-restricted-pointers-timer-v1-1-6626b91e54ab@linutronix.de
It should use an atomic instruction to update even if the histogram is
keyed by delta as it's also used for stats.
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20250227191223.1288473-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The bucket_num is set based on the {max,min}_latency already in
cmd_ftrace(), so no need to check it again in BPF. Also I found
that it didn't pass the max_latency to BPF. :)
No functional changes intended.
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20250227191223.1288473-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When BPF collects the stats for the latency in usec, it first divides
the time by 1000. But that means it would have 0 if the delta is small
and won't update the total time properly.
Let's keep the stats in nsec always and adjust to usec before printing.
Before:
$ sudo ./perf ftrace latency -ab -T mutex_lock --hide-empty -- sleep 0.1
# DURATION | COUNT | GRAPH |
0 - 1 us | 765 | ############################################# |
1 - 2 us | 10 | |
2 - 4 us | 2 | |
4 - 8 us | 5 | |
# statistics (in usec)
total time: 0 <<<--- (here)
avg time: 0
max time: 6
min time: 0
count: 782
After:
$ sudo ./perf ftrace latency -ab -T mutex_lock --hide-empty -- sleep 0.1
# DURATION | COUNT | GRAPH |
0 - 1 us | 880 | ############################################ |
1 - 2 us | 13 | |
2 - 4 us | 8 | |
4 - 8 us | 3 | |
# statistics (in usec)
total time: 268 <<<--- (here)
avg time: 0
max time: 6
min time: 0
count: 904
Tested-by: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20250227191223.1288473-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The bulk of this is driver specific fixes, mostly unremarkable. There's
also one core fix from Charles, fixing up confusion around the limiting
of maximum control values.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmfSEi8ACgkQJNaLcl1U
h9ALVQf+OpOZuoTfAiu44d/l3WXEtn7l6rwihWbozUuNW7LwfnNSDYnBstOl/FDM
6ry8oJbaj8t2We3joJsixrGbrGYiJKFcbZvFd6FyPQzF63s0tUAZk9iu182If3i7
nrjFSch0hYDR3A/o5NfOufelRwmNUvOEXFgvLIJ+Hn1qDeJz5nyUyauCGSu/M0S0
blF36uVjuiEc+2QpNLcSvBqh9aJ9Atg9X4GFhpSsq4Kp6eFtRmiERHYlWQEI0ppM
becNQnEwn4n9RZp0bt5OYx/f7wE1BcjNlJyKXV5rS74MypSZCeZKe5N+F4IoiKKN
o/HwNoh1rl/+e0n8JmqHUyRXM6Fp2g==
=nXOh
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.14-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
The bulk of this is driver specific fixes, mostly unremarkable. There's
also one core fix from Charles, fixing up confusion around the limiting
of maximum control values.
Plane->min_alignment returns an unsigned int so lets use that in the whole
relevant call chain.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307111402.26577-5-tvrtko.ursulin@igalia.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c36e3442ea)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This is more readable than the nameless booleans and will also come handy
later.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307111402.26577-4-tvrtko.ursulin@igalia.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 52a237e8d6)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Emit_flush_invalidate() is incorrectly marking the write to LRC_PPHWSP as
a GGTT write and also writing an atypical ~0 dword as the payload. Fix it.
While at it drop the unused flags argument.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307111402.26577-3-tvrtko.ursulin@igalia.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 08ea901d0b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
With only XE_FW_GT taken LNCF registers read back as all zeroes, leading
to a wild goose chase trying to figure out why is register programming
incorrect.
Fix it by grabbing XE_FORCEWAKE_ALL for affected platforms.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307111402.26577-2-tvrtko.ursulin@igalia.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 1182bc74b3)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There's a mismatch on API: while xe_rtp_process_to_sr() processes
entries until an entry without name, the active tracking with
xe_rtp_process_ctx_enable_active_tracking() needs to use the number of
elements. The number of elements is taken everywhere using ARRAY_SIZE(),
but that will have one entry too many. This leads to the following
warning, as reported by lkp:
drivers/gpu/drm/xe/xe_tuning.c: In function 'xe_tuning_dump':
>> include/drm/drm_print.h:228:31: warning: '%s' directive argument is null [-Wformat-overflow=]
228 | drm_printf((printer), "%.*s" fmt, (indent), "\t\t\t\t\tX", ##__VA_ARGS__)
| ^~~~~~
drivers/gpu/drm/xe/xe_tuning.c:226:17: note: in expansion of macro 'drm_printf_indent'
226 | drm_printf_indent(p, 1, "%s\n", engine_tunings[idx].name);
| ^~~~~~~~~~~~~~~~~
That's because it will still process the last entry when tracking the
active tunings. The same issue exists in the WAs. Change
xe_rtp_process_to_sr() to also take the number of elements so the empty
entry can be removed and the warning should go away. Fixing on the
active-tracking side would more fragile as the it would need a `- 1`
everywhere and continue to use a different approach for number of
elements.
Aside from the warning, it's a non-issue as there would always be enough
bits allocated and the last entry would never be active since
xe_rtp_process_to_sr() stops on the sentinel.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503021906.P2MwAvyK-lkp@intel.com/
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306-fix-print-warning-v1-1-979c3dc03c0d@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 8aa8c2d421)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Due to wrong `.. kernel-doc` directive in Documentation/gpu/rfc/gpusvm.rst
the documentation was actually not parsing anything from
drivers/gpu/drm/drm_gpusvm.c. This fixes the kernel-doc include and all
warnings/errors created when doing so.
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/intel-xe/20250307195239.57abcd2d@canb.auug.org.au/
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307-fix-svm-kerneldoc-v2-1-03c74b199620@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4da1fb61e0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
xe_guc_pc_start() was getting called from both
xe_uc_init_hw() and from xe_guc_start().
But both are called from do_gt_restart() and only
xe_uc_init_hw() is called at initialization.
So, let's remove the duplication in the regular gt_restart
path.
The only place where xe_guc_pc_start() won't get called now
is on the gt_reset failure path. However, if gt_reset has
failed, it is really unlikely that the PC start will work
or is desired.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306220643.1014049-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit fc858ddf9c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
failure to allocate inode => leaked dentry...
this one had been there since the initial merge; to be fair,
if we are that far OOM, the odds of failing at that particular
allocation are low...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Leak fixes back in 2008 missed one case - if we are trying to set affinity
and spufs_mkdir() fails, we need to drop the reference to neighbor.
Fixes: 58119068cb "[POWERPC] spufs: Fix memory leak on SPU affinity"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
prior to "[POWERPC] spufs: Fix gang destroy leaks" we used to have
a problem with gang lifetimes - creation of a gang returns opened
gang directory, which normally gets removed when that gets closed,
but if somebody has created a context belonging to that gang and
kept it alive until the gang got closed, removal failed and we
ended up with a leak.
Unfortunately, it had been fixed the wrong way. Dentry of gang
directory was no longer pinned, and rmdir on close was gone.
One problem was that failure of open kept calling simple_rmdir()
as cleanup, which meant an unbalanced dput(). Another bug was
in the success case - gang creation incremented link count on
root directory, but that was no longer undone when gang got
destroyed.
Fix consists of
* reverting the commit in question
* adding a counter to gang, protected by ->i_rwsem
of gang directory inode.
* having it set to 1 at creation time, dropped
in both spufs_dir_close() and spufs_gang_close() and bumped
in spufs_create_context(), provided that it's not 0.
* using simple_recursive_removal() to take the gang
directory out when counter reaches zero.
Fixes: 877907d37d "[POWERPC] spufs: Fix gang destroy leaks"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's called from spufs_fill_dir(), and caller of that will do
spufs_rmdir() in case of failure. That does remove everything
we'd managed to create, but... the problem dentry is still
negative. IOW, it needs to be explicitly dropped.
Fixes: 3f51dd91c8 "[PATCH] spufs: fix spufs_fill_dir error path"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to and correctly identify the char array as "not a C
string" and thereby eliminate the warning.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250310222257.work.866-kees@kernel.org
RTL8814A is a wifi 5 chip with 4 RF paths (chains), 3 spatial streams,
and probably no Bluetooth.
The USB-based RTL8814AU can reach 800 Mbps in the 5 GHz band in USB 3
mode. In USB 2 mode it only uses 2 spatial streams.
The PCI-based RTL8814AE is not as popular and didn't get as much
testing so it's unclear how fast it goes. It's more like a bonus on top
of the RTL8814AU support.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/5795b0a7-511e-40b5-ac36-476b63f174c7@gmail.com
This is the entry point for the new module rtw88_8814au.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/71457787-5a9e-4ead-a62c-22ca44e00b89@gmail.com
This is the entry point for the new module rtw88_8814ae.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/74ebab2f-a23e-4d87-935f-0af2b5cba672@gmail.com
This contains various tables for initialising the RTL8814A, plus TX
power limits.
Also add rtw8814a_table.h.
Split into two patches because they are big.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/4c48e35e-1b04-42ed-940e-0e931693def6@gmail.com
This contains various tables for initialising the RTL8814A, plus TX
power limits.
Split into two patches because they are big.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/df0b8ceb-2c2f-4bda-906f-a05c7b4d424c@gmail.com
Add various register definitions which will be used by the new driver.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1dcb5abb-26f8-4db5-be36-057de56465e5@gmail.com
RTL8852BE-VT support for firmware 29.122. Add parser for Bluetooth channel
map report version 7.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250308025832.10400-5-pkshih@realtek.com
In order to rearrange the structure member, the format update to version 7.
And to parse the report correctly, add the related logic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250308025832.10400-4-pkshih@realtek.com
