Add support for wildcard matching of network interface names. This is
useful for auto-generated interfaces, for example podman creates network
interfaces for containers with the naming scheme podman0, podman1,
podman2, ...
To maintain backward compatibility guard this feature with a new policy
capability 'netif_wildcard'.
Netifcon definitions are compared against in the order given by the
policy, so userspace tools should sort them in a reasonable order.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Setting domain->iommufd_hwpt in iommufd_hwpt_alloc() only covers the HWPT
allocations from user space, but not for an auto domain. This resulted in
a NULL pointer access in the auto domain pathway:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
pc : iommufd_sw_msi+0x54/0x2b0
lr : iommufd_sw_msi+0x40/0x2b0
Call trace:
iommufd_sw_msi+0x54/0x2b0 (P)
iommu_dma_prepare_msi+0x64/0xa8
its_irq_domain_alloc+0xf0/0x2c0
irq_domain_alloc_irqs_parent+0x2c/0xa8
msi_domain_alloc+0xa0/0x1a8
Since iommufd_sw_msi() requires to access the domain->iommufd_hwpt, it is
better to set that explicitly prior to calling iommu_domain_set_sw_msi().
Fixes: 748706d7ca ("iommu: Turn fault_data to iommufd private pointer")
Link: https://patch.msgid.link/r/20250305211800.229465-1-nicolinc@nvidia.com
Reported-by: Ankit Agrawal <ankita@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Ankit Agrawal <ankita@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Subshell evaluations are not exempt from errexit, so if a command is
not available, `which` will fail and exit the script as a whole.
This causes the helpful error messages to not be printed if they are
tacked on using a `$?` comparison.
Resolve the issue by using chains of logical operators, which are not
subject to the effects of errexit.
Fixes: e37c1877ba ("scripts/selinux: modernize mdp")
Signed-off-by: Tim Schumacher <tim.schumacher1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The devm_kzalloc() function returns NULL on error, not error pointers.
Fix the check.
Fixes: 03437e857b ("clk: mmp: Add Marvell PXA1908 APMU driver")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250307064708.209511-1-hanchunchao@inspur.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Similarly to what was done with the memcpy() routines, make
copy_to_user(), copy_from_user() and clear_user() also use the Armv8.8
FEAT_MOPS instructions.
Both MOPS implementation options (A and B) are supported, including
asymmetric systems. The exception fixup code fixes up the registers
according to the option used.
In case of a fault the routines return precisely how much was not copied
(as required by the comment in include/linux/uaccess.h), as unprivileged
versions of CPY/SET are guaranteed not to have written past the
addresses reported in the GPRs.
The MOPS instructions could possibly be inlined into callers (and
patched to branch to the generic implementation if not detected;
similarly to what x86 does), but as a first step this patch just uses
them in the out-of-line routines.
Signed-off-by: Kristina Martšenko <kristina.martsenko@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250228170006.390100-4-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A subsequent patch will use CPY* instructions to copy between user and
kernel memory. Add handling for PAN faults caused by an intended kernel
memory access erroneously accessing user memory, in order to make it
easier to debug kernel bugs and to keep the same behavior as with
regular loads/stores.
Signed-off-by: Kristina Martšenko <kristina.martsenko@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250228170006.390100-3-kristina.martsenko@arm.com
[catalin.marinas@arm.com: Folded the extable search into insn_may_access_user()]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This reverts commit 4d94f05558 which has
problems (see [1]) and is no longer needed since 581dd2dc16
("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating")
has reworked the code where the original bug has been found.
[1] Link: https://lore.kernel.org/linux-bluetooth/877c55ci1r.wl-tiwai@suse.de/T/#t
Fixes: 4d94f05558 ("Bluetooth: hci_core: Fix sleeping function called from invalid context")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Define pin_offsets values in the same way it is done in DCE8
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updated description for the 'other_mode' parameter. This parameter is
used to determine the display mode of another display controller that
may be sharing the line buffer.
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add error handling to propagate amdgpu_cgs_create_device() failures
to the caller. When amdgpu_cgs_create_device() fails, release hwmgr
and return -ENOMEM to prevent null pointer dereference.
[v1]->[v2]: Change error code from -EINVAL to -ENOMEM. Free hwmgr.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1,
due to lack of .is_two_pixels_per_container function in dce60_tg_funcs,
causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X.
So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs.
Reported-by: Rosen Penev <rosenp@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3942
Fixes: e6a901a008 ("drm/amd/display: use even ODM slice width for two pixels per container")
Signed-off-by: Aliaksei Urbanski <aliaksei.urbanski@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We advertise DCC as supported for NV12/P010 formats on GFX12,
but it would fail on this check on atomic commit.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Encode socket id to CPER record id to be unique across devices.
v2: add pointer check for adev->smuio.funcs->get_socket_id
v2: set 0 if adev->smuio.funcs->get_socket_id is NULL
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For gfx_v9_4_3 specifically, before regGB_ADDR_CONFIG is overwritten
in gfx hw_init it is read out to popluate the gb_addr_config_fields
in the sw_init stage, which causes mismatch.
Fix it by using the golden value in sw_init as well.
v2: This is a driver-set golden reg and keep as it is (Lijo)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For aqua_vanjaram, A0 HW is retired so remove the code
specific for it in gfx ip init.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For default policy, driver will issue an RMA event when the number of
bad pages is greater than 8 physical rows, rather than reaches 8
physical rows, don't rely on threshold configurable parameters in
default mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While the entry get in svm_range_unmap_from_cpu is the last entry, and
the entry is page fault, it also need to be dropped. So for equal case,
it also need to be dropped.
v2:
Only modify the svm_range_restore_pages.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Xiaogang Chen<xiaogang.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran SRIOV VF cannot access the power brake feature regs.
The accesses can be skipped to avoid a dmesg warning.
v2: Remove redundant asic type check
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused declaration of gws_debug_workaround.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Amber Lin <amber.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran SRIOV VF does not have write permissions to GRBM_CTNL.
This access can be skipped to avoid a dmesg warning.
v2: Use GC IP version check instead of asic check
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- xgene-hwmon: Fix a NULL vs IS_ERR_OR_NULL() check
- ad7314: Return error if leading zero bits are non-zero
- ntc_thermistor: Update/fix the ncpXXxh103 sensor table
- pmbus: Initialise page count in pmbus_identify()
- peci/dimmtemp: Di not provide fake threshold data
-----BEGIN PGP SIGNATURE-----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=naYk
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- xgene-hwmon: Fix a NULL vs IS_ERR_OR_NULL() check
- ad7314: Return error if leading zero bits are non-zero
- ntc_thermistor: Update/fix the ncpXXxh103 sensor table
- pmbus: Initialise page count in pmbus_identify()
- peci/dimmtemp: Do not provide fake threshold data
* tag 'hwmon-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: fix a NULL vs IS_ERR_OR_NULL() check in xgene_hwmon_probe()
hwmon: (ad7314) Validate leading zero bits and return error
hwmon: (ntc_thermistor) Fix the ncpXXxh103 sensor table
hwmon: (pmbus) Initialise page count in pmbus_identify()
hwmon: (peci/dimmtemp) Do not provide fake thresholds data
- protect gpio-aggregator against module unload
- use raw spinlock in gpio-rcar to fix a lockdep splat
- fix OF node leak in gpio-rcar
-----BEGIN PGP SIGNATURE-----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=MgMW
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- protect gpio-aggregator against module unload
- use raw spinlock in gpio-rcar to fix a lockdep splat
- fix OF node leak in gpio-rcar
* tag 'gpio-fixes-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: rcar: Fix missing of_node_put() call
gpio: rcar: Use raw_spinlock to protect register access
gpio: aggregator: protect driver attr handlers against module unload
Passive scanning shall only be enabled when disconnecting LE links,
otherwise it may start result in triggering scanning when e.g. an ISO
link disconnects:
> HCI Event: LE Meta Event (0x3e) plen 29
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 257
CIG Synchronization Delay: 0 us (0x000000)
CIS Synchronization Delay: 0 us (0x000000)
Central to Peripheral Latency: 10000 us (0x002710)
Peripheral to Central Latency: 10000 us (0x002710)
Central to Peripheral PHY: LE 2M (0x02)
Peripheral to Central PHY: LE 2M (0x02)
Number of Subevents: 1
Central to Peripheral Burst Number: 1
Peripheral to Central Burst Number: 1
Central to Peripheral Flush Timeout: 2
Peripheral to Central Flush Timeout: 2
Central to Peripheral MTU: 320
Peripheral to Central MTU: 160
ISO Interval: 10.00 msec (0x0008)
...
> HCI Event: Disconnect Complete (0x05) plen 4
Status: Success (0x00)
Handle: 257
Reason: Remote User Terminated Connection (0x13)
< HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
Fixes: 9fcb18ef3a ("Bluetooth: Introduce LE auto connect options")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sco_conn refcount shall not be incremented a second time if the sk
already owns the refcount, so hold only when adding new chan.
Add sco_conn_hold() for clarity, as refcnt is never zero here due to the
sco_conn_add().
Fixes SCO socket shutdown not actually closing the SCO connection.
Fixes: ed95885549 ("Bluetooth: SCO: remove the redundant sco_conn_put")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Automatically configure the altsetting for HCI_USER_CHANNEL when a SCO
is connected.
The motivation is to enable the HCI_USER_CHANNEL user to send out SCO
data through USB Bluetooth chips, which is mainly used for bidirectional
audio transfer (voice call). This was not capable because:
- Per Bluetooth Core Spec v5, Vol 4, Part B, 2.1, the corresponding
alternate setting should be set based on the air mode in order to
transfer SCO data, but
- The Linux Bluetooth HCI_USER_CHANNEL exposes the Bluetooth Host
Controller Interface to the user space, which is something above the
USB layer. The user space is not able to configure the USB alt while
keeping the channel open.
This patch intercepts the HCI_EV_SYNC_CONN_COMPLETE packets in btusb,
extracts the air mode, and configures the alt setting in btusb.
This patch is tested on ChromeOS devices. The USB Bluetooth models
(CVSD, TRANS alt3 and alt6) could work without a customized kernel.
Fixes: b16b327edb ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
As the gpio pads are capable of operating at either 1.8V or 3.3V add
both options to the pinmuxing so that the appropriate level can be set
depending on the voltage of the regulator driving the pads.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-2-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to the board schematics the enable pin of this regulator is
connected to gpio line #9 of the first instance of the TCA9539
GPIO expander, so adjust it.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-1-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some discrete graphics cards such as the NVIDIA RTX A6000 support
resizable BARs. When connecting an A6000 card to the NVIDIA IGX Orin
platform, resizing the BAR1 aperture to 8GB fails because the current
device-tree configuration for the PCIe C5 slot cannot support this.
Fix this by updating the device-tree 'reg' and 'ranges' properties for
the PCIe C5 slot to support this.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250116151903.476047-1-jonathanh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
As per the Orin Nano Dev Kit schematic, GPIO_G.02 is not available
on this device family. It should not be used at all on Orin NX/Nano.
Having this unused pin mapped as the suspend key can lead to
unpredictable behavior for low power modes.
Orin NX/Nano uses GPIO_EE.04 as both a "power" button and a "suspend"
button. However, we cannot have two gpio-keys mapped to the same
GPIO. Therefore remove the "suspend" key.
Cc: stable@vger.kernel.org
Fixes: e63472eda5 ("arm64: tegra: Support Jetson Orin NX reference platform")
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Signed-off-by: Ivy Huang <yijuh@nvidia.com>
Link: https://lore.kernel.org/r/20250206224034.3691397-1-yijuh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Variable func is not effectively used, so delete it.
kernel/trace/trace_functions_graph.c:925:16: warning: variable ‘func’ set but not used.
This happened because the variable "func" which came from "call->func" was
replaced by "ret_func" coming from "graph_ret->func" but "func" wasn't
removed after the replacement.
Link: https://lore.kernel.org/20250307021412.119107-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=19250
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fixes and new HW support:
- amd/pmf:
- Initialize 'cb_mutex'
- Support for new version of PMF-TA
- intel-hid: Fix volume buttons on Microsoft Surface Go 4 tablet
- intel/vsec: Add Diamond Rapids support
- thinkpad_acpi: Add battery quirk for ThinkPad X131e
The following is an automated shortlog grouped by driver:
amd/pmf:
- Initialize and clean up `cb_mutex`
- Propagate PMF-TA return codes
- Update PMF Driver for Compatibility with new PMF-TA
intel-hid:
- fix volume buttons on Microsoft Surface Go 4 tablet
intel/vsec:
- Add Diamond Rapids support
thinkpad_acpi:
- Add battery quirk for ThinkPad X131e
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ8rDZAAKCRBZrE9hU+XO
McQhAQDw1Vf8jKrdK3X80DNSuIToO5B4dpX+PB8r4xgK96ipqgD9GKxHW1tbGqHH
vUTEqwcpDwBMe+wDRbD31SBaZUSgXwo=
=wZNA
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmf:
- Initialize 'cb_mutex'
- Support for new version of PMF-TA
- intel-hid: Fix volume buttons on Microsoft Surface Go 4 tablet
- intel/vsec: Add Diamond Rapids support
- thinkpad_acpi: Add battery quirk for ThinkPad X131e
* tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA
platform/x86/amd/pmf: Propagate PMF-TA return codes
platform/x86/intel/vsec: Add Diamond Rapids support
platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e
platform/x86: intel-hid: fix volume buttons on Microsoft Surface Go 4 tablet
platform/x86/amd/pmf: Initialize and clean up `cb_mutex`
pci_release_resource() will print "... releasing" regardless of the
resource being assigned or not. Move the print after the res->parent check
to avoid claiming the kernel would be releasing an unassigned resource.
Likely, none of the current callers pass a resource that is unassigned so
this change is mostly to correct the non-sensical order than to remove
errorneous printouts.
Link: https://lore.kernel.org/r/20250307140922.5776-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
There is a single change in ALSA core (for sequencer code for the
module auto-loading in a wrong timing) while the all rest are various
HD- and USB-audio fixes. Many of them are boring device-specific
quirks, and should be safe to take.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmfKrWoOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE8ENA//eisslsBfG3XUxsSnPIEwCxKjDPH7l9CMRTx+
ff35fNTK4LNeueaK8aHrT3FZlc7xtNj5rx3AjvgvUG1AZgwRojjK+CYLx9gT8iXq
peZs5A+/HdrG7UlRkNwBNHYI4fZbpbNmW6MUcx8M6ILlTmzFyr/u3g8UZUkAJj/x
HICGGm7sZQBePjSJah25sDO8jyN9ANVfh/XcP20y63CLwIK0i7KwdQqmakYzW4zL
OojV7/O8gaCmPCrPjc/r4KG/XpaE33c0ixPqnegd3Zae0ehGyRmwKODSLRUXIU2U
BtcA1cAUR4SMjXBxVqNY0+h9JkP4AFVMc1DbVRyGouhVJMoQQmAeYo4RDAF+gJNA
GGag0L4XdubndCgjAChqZ0wsPZFumBH4ZaezWKZL8UoF9QbCPhsIOh1PIXf5fj8x
NDHgc1x0GUPmFO7hR86bJ87ddILwBlG5xQLTWEFcTH4MZvUTbQelsHQo7yTb/HbZ
T34hSupXscts0tHuWNGd+x71TLFmj8F007kAk8EGniZPYFxycJZtzaIlCrjAGto6
sjvHqnY5Sach6lIJMFzjMdkzAVIuggwo8Ja17knxXH449TLhN64OysvRO0yViH1J
uHBcal7t5rC2LMCtO0CZ6+otl92zCWH98GgBsvjErtGsusc0nqE/FwPrEANlSqO2
U2i8yw0=
=0M0k
-----END PGP SIGNATURE-----
Merge tag 'sound-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There is a single change in ALSA core (for sequencer code for the
module auto-loading in a wrong timing) while the all rest are various
HD- and USB-audio fixes.
Many of them are boring device-specific quirks, and should be safe to
take"
* tag 'sound-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add support for ASUS Zenbook UM3406KA Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS B5405 and B5605 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for various ASUS Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix G614 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix GA603 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix G814 Laptop using CS35L41 HDA
ALSA: hda: intel: Add Dell ALC3271 to power_save denylist
ALSA: hda/realtek: update ALC222 depop optimize
ALSA: hda: realtek: fix incorrect IS_REACHABLE() usage
ALSA: usx2y: validate nrpacks module parameter on probe
ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform
ALSA: seq: Avoid module auto-load handling at event delivery
ALSA: hda: Fix speakers on ASUS EXPERTBOOK P5405CSA 1.0
ALSA: hda/realtek: Fix Asus Z13 2025 audio
ALSA: hda/realtek: Remove (revert) duplicate Ally X config
Per PCIe r6.0, sec 7.8.6.2, devices can advertise Resizable BAR sizes up to
128 TB in the Resizable BAR Capability register. Larger sizes can be
advertised via the Capability register, but that requires an API change.
Update pci_rebar_get_possible_sizes() and pbus_size_mem() to increase the
sizes we currently support from 512 GB to 128 TB.
Link: https://lore.kernel.org/r/20250307053535.44918-1-daizhiyuan@phytium.com.cn
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
I was helping someone with writing a new Rust abstraction, and we were
using the miscdevice abstraction as an example. While doing this, it
became clear to me that the way I implemented the f_ops vtable is
confusing to new Rust users, and that the approach used by the block
abstractions is less confusing.
Thus, update the miscdevice abstractions to use the same approach as
rust/kernel/block/mq/operations.rs.
Sorry about the large diff. This changes the indentation of a large
amount of code.
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250227-miscdevice-fops-change-v1-1-c9e9b75d67eb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lack of an explicit credential (kernel/cred.c) entry has caused
confusion in the past among new, and not-so-new developers, about where
to send credential patches for discussion and merging. Those patches
that are sent can often rot on the mailing lists for months as there
is no clear maintainer tasked with reviewing and merging patches.
I'm volunteering for the cred maintainer role to try and reduce the
confusion and help cred patches find their way up to Linus' tree. As
there generally aren't a lot of cred patches I'll start with simply
folding them into the LSM tree, but if this changes I'll setup a
dedicated cred tree.
Link: https://lore.kernel.org/all/20250304222304.214704-2-paul@paul-moore.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move the dbuf_state readout parts into skl_wm_get_hw_state()
so that the details are better hidden from sight.
This will stop updating this on pre-skl, but that's what we want
since the dbuf state is only used on skl+.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-18-ville.syrjala@linux.intel.com
Move the wm readout to happen earlier. This is needed because
the bw_state readout will need ddb information populated by
the wm readout.
For now limit this to skl+ as I've not really analyzed the
implications of doing this on other platforms.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-17-ville.syrjala@linux.intel.com
I'll need to move the wm readout to an earlier point in the
sequence (since the bw state readout will need ddb information
from the wm readout). But (at least for now) the wm sanitation
will need to stay put as it needs to also sanitize things for
any pipes/planes we disable later during the hw state takeover.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-16-ville.syrjala@linux.intel.com
Instead of hand rolling the cdclk state disabling for a
pipe in noatomic() let's just recompute the whole thing
from scratch. Less code we have to remember to keep in sync.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-15-ville.syrjala@linux.intel.com
intel_crtc_calculate_min_cdclk() can't return an error
(since commit 5ac860cc52 ("drm/i915: Fix DBUF bandwidth vs.
cdclk handling")) so there is no point in checking for one.
Also we can just call it unconditionally since it itself
checks crtc_state->hw.enabled. We are currently checking
crtc_state->hw.active in the readout path, but active==enabled
during readout, and arguably enabled is the more correct thing
to check anyway.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-14-ville.syrjala@linux.intel.com
We only compute bw_state->data_rate and bw_state->num_active_planes
on icl+. Do the same during readout so that we don't leave random
junk inside the state.
v2: Skip the whole intel_bw_crtc_update() (Vinod)
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-13-ville.syrjala@linux.intel.com
Hoist the bw stuff into a separate function from
intel_modeset_readout_hw_state() so that the details
are better hidden inside intel_bw.c.
We can also skip the whole thing on pre-skl since the dbuf state
isn't actually used on those platforms.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-11-ville.syrjala@linux.intel.com
