This display controller is present on M-series chips and is used
to drive the touchbar display.
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224-adpdrm-v8-2-cccf96710f0f@gmail.com
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCZ8VyFAAKCRBcsMJ8RxYu
Y4VkAYDeFyUEQUb38Z2w1nq4CPiSpgT48Wa5/ES3P2lrLz/ULtt9LB6lteBzpG4S
La9ktFsBgPzW7pBdLyLkEFsHxlI+LePJ3E6tmP7B6xuFaPArnoSy1wATSNH0/dM9
lBGZ33Xcng==
=2fdY
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.14-rc6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs cleanups from Carlos Maiolino:
"Just a few cleanups"
* tag 'xfs-fixes-6.14-rc6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove the XBF_STALE check from xfs_buf_rele_cached
xfs: remove most in-flight buffer accounting
xfs: decouple buffer readahead from the normal buffer read path
xfs: reduce context switches for synchronous buffered I/O
Updated the MODULE_COMPRESS_NONE with MODULE_COMPRESS as it was no longer
available from kernel modules. As MODULE_COMPRESS and MODULE_DECOMPRESS
depends on MODULES removing MODULES as well.
Fixes: c7ff693fa2 ("module: Split modules_install compression and in-kernel decompression")
Signed-off-by: Arulpandiyan Vadivel <arulpandiyan.vadivel@siemens.com>
Link: https://lore.kernel.org/r/20250302103831.285381-1-arulpandiyan.vadivel@siemens.com
Signed-off-by: Kees Cook <kees@kernel.org>
Since these functions handle moving between C strings and non-C strings,
they should check for the appropriate presence/lack of the nonstring
attribute on arguments.
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for adding more type checking to the memtostr/strtomem*()
helpers, introduce the ability to check for the "nonstring" attribute.
This is the reverse of what was added to strscpy*() in commit 559048d156
("string: Check for "nonstring" attribute on strscpy() arguments").
Note that __annotated() must be explicitly tested for, as GCC added
__builtin_has_attribute() after it added the "nonstring" attribute. Do
so here to avoid the !__annotated() test triggering build failures
when __builtin_has_attribute() was missing but __nonstring was defined.
(I've opted to squash this fix into this patch so we don't end up with
a possible bisection target that would leave the kernel unbuildable.)
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Michael Kelley <mhklinux@outlook.com>
Closes: https://lore.kernel.org/all/adbe8dd1-a725-4811-ae7e-76fe770cf096@linux.vnet.ibm.com/
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Kees Cook <kees@kernel.org>
- probe-events: Some issues are fixed.
. probe-events: Remove unused MAX_ARG_BUF_LEN macro.
MAX_ARG_BUF_LEN is not used so remove it.
. fprobe-events: Log error for exceeding the number of entry args.
Since the max number of entry args is limited, it should be checked
and rejected when the parser detects it.
. tprobe-events: Reject invalid tracepoint name
User can specify an invalid tracepoint name e.g. including '/', then
the new event is not defined correctly in the eventfs.
. tprobe-events: Fix a memory leak when tprobe defined with $retval
There is a memory leak if tprobe is defined with $retval.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmfFKkcbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b/F4H/10qmUSsec9+IbQseg0E
MSRxAhJQ+xOcLfGsWhblW2zirkw9o4PghZYwBodkastu4Wgq2M5ASKd6KqUY2o7D
CX+tCoXf80SDLEVd2go5m72Ml40rrGDEgLvS5YcEa4Iqr5nPZrvCJ7rl2tlqupQH
W2ttOTkX9H28phAFDCsdl5ZJUCJRxlFc6fYG0yZYHsFdRub9J2LPiMTMwIlu56YS
8HH3NxS+wxlKK2I4VfD8mFsOnrNh7MFDLOOwNMlKWvm2wSPbPmVho+eXLAc5xyTO
d+vUpkp4Dp9WWCLuNdO/sqY0IKngO2sM++WbtL/YPP8YijqsrImep4PCR8/fvlN6
Urs=
=dyZm
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe events fixes from Masami Hiramatsu:
- probe-events: Remove unused MAX_ARG_BUF_LEN macro - it is not used
- fprobe-events: Log error for exceeding the number of entry args.
Since the max number of entry args is limited, it should be checked
and rejected when the parser detects it.
- tprobe-events: Reject invalid tracepoint name
If a user specifies an invalid tracepoint name (e.g. including '/')
then the new event is not defined correctly in the eventfs.
- tprobe-events: Fix a memory leak when tprobe defined with $retval
There is a memory leak if tprobe is defined with $retval.
* tag 'probes-fixes-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Remove unused MAX_ARG_BUF_LEN macro
tracing: fprobe-events: Log error for exceeding the number of entry args
tracing: tprobe-events: Reject invalid tracepoint name
tracing: tprobe-events: Fix a memory leak when tprobe with $retval
The uvc_driver structure used to contain more fields, but those got
removed in commit ba2fa99668 ("[media] uvcvideo: Hardcode the
index/selector relationship for XU controls"). The structure is now just
a wrapper around usb_driver. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Actions UVC05 is a HDMI to USB dongle that implements the UVC protocol.
When the device suspends, its firmware seems to enter a weird mode when it
does not produce more frames.
Add the device to the quirk list to disable autosuspend.
Bus 001 Device 007: ID 1de1:f105 Actions Microelectronics Co. Display
capture-UVC05
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 [unknown]
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1de1 Actions Microelectronics Co.
idProduct 0xf105 Display capture-UVC05
bcdDevice 4.09
iManufacturer 1 Actions Micro
iProduct 2 Display capture-UVC05
iSerial 3 -1005308387
bNumConfigurations 1
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241210-uvc-hdmi-suspend-v1-1-01f5dec023ea@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Added documentation of V4L2_CID_UVC_REGION_OF_INTEREST_RECT and
V4L2_CID_UVC_REGION_OF_INTEREST_AUTO.
An example of a userspace implementing this feature can be found at:
https://chromium.googlesource.com/chromiumos/platform2/+/refs/heads/release-R121-15699.B/camera/hal/usb/
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-17-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement support for ROI as described in UVC 1.5:
4.2.2.1.20 Digital Region of Interest (ROI) Control
ROI control is implemented using V4L2 control API as
two UVC-specific controls:
V4L2_CID_UVC_REGION_OF_INTEREST_RECT and
V4L2_CID_UVC_REGION_OF_INTEREST_AUTO.
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-16-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix control names: "Of" -> "of", "Controls" -> "Ctrls"]
Do not process unknown data types.
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-15-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Centralize the calculation for the v4l2_size of a mapping.
Reviewed-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-14-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
v4l2_query_ext_ctrl contains information that is missing in
v4l2_queryctrl, like elem_size and elems.
With this change we can handle all the element_size information inside
uvc_ctrl.c.
Now that we are at it, remove the memset of the reserved fields, the
v4l2 ioctl handler should do that for us.
There is no functional change expected from this change.
Reviewed-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-13-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add support for V4L2_CTRL_WHICH_MIN/MAX_VAL in uvc driver.
It is needed for the V4L2_CID_UVC_REGION_OF_INTEREST_RECT control.
Signed-off-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-12-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Split the function in two parts. queryctrl_boundaries will be used in
future patches.
No functional change expected from this patch.
Reviewed-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-11-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This patch adds support for compound controls. This is required to
support controls that cannot be represented with a s64 data, such as the
Region of Interest.
Signed-off-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-10-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the logic to a separated function. Do not expect any change.
This is a preparation for supporting compound controls.
Reviewed-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-9-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Right now, we only support mappings for v4l2 controls with a max size of
s32. This patch modifies the prototype of get/set so it can support any
size.
This is done to prepare for compound controls.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-8-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If nothing needs to be done. Exit early.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-7-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
We want to support fetching the min and max values with g_ext_ctrls,
this patch is a preparation for that.
Instead of abusing uvc_query_v4l2_ctrl(), add an extra parameter to
uvc_ctrl_get, so it can support fetching the default value.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-6-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Be consistent with uvc_get_le_value() and do the menu translation there.
Note that in this case, the refactor does not provide much... but
consistency is a nice feature.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-5-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
map->get() gets a value from an uvc_control in "UVC format" and converts
it to a value that can be consumed by v4l2.
Instead of using a special get function for V4L2_CTRL_TYPE_MENU, we
were converting from uvc_get_le_value in two different places.
Move the conversion to uvc_get_le_value().
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-4-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This control represents a generic read/write rectangle.
It supports V4L2_CTRL_WHICH_MIN/MAX_VAL.
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-3-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add the capability of retrieving the min and max values of a
compound control.
[Ricardo: Added static to v4l2_ctrl_type_op_(maximum|minimum) proto]
[Ricardo: Fix documentation]
Signed-off-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-2-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix small alignment checkpatch warning]
Add p_rect to struct v4l2_ext_control with basic support in
v4l2-ctrls.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-1-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
sfr->buf_size is in shared memory and can be modified by malicious user.
OOB write is possible when the size is made higher than actual sfr data
buffer. Cap the size to allocated size for such cases.
Cc: stable@vger.kernel.org
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
qsize represents size of shared queued between driver and video
firmware. Firmware can modify this value to an invalid large value. In
such situation, empty_space will be bigger than the space actually
available. Since new_wr_idx is not checked, so the following code will
result in an OOB write.
...
qsize = qhdr->q_size
if (wr_idx >= rd_idx)
empty_space = qsize - (wr_idx - rd_idx)
....
if (new_wr_idx < qsize) {
memcpy(wr_ptr, packet, dwords << 2) --> OOB write
Add check to ensure qsize is within the allocated size while
reading and writing packets into the queue.
Cc: stable@vger.kernel.org
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
words_count denotes the number of words in total payload, while data
points to payload of various property within it. When words_count
reaches last word, data can access memory beyond the total payload. This
can lead to OOB access. With this patch, the utility api for handling
individual properties now returns the size of data consumed. Accordingly
remaining bytes are calculated before parsing the payload, thereby
eliminates the OOB access possibilities.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is a possibility that init_codecs is invoked multiple times during
manipulated payload from video firmware. In such case, if codecs_count
can get incremented to value more than MAX_CODEC_NUM, there can be OOB
access. Reset the count so that it always starts from beginning.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04 ("media: venus: hfi_parser: add common capability parser")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add cpu{1-3} device nodes to the corstone1000 device tree to enable the
support for secondary CPU cores.
This update facilitates symmetric multiprocessing (SMP) support on the
corstone1000 Fixed Virtual Platform (FVP), allowing the secondary cores
to be properly initialised and utilised.
Only FVP platform will have SMP support and hence the secondary cpu
definitions are not added to corstone1000.dtsi.
Signed-off-by: Hugues KAMBA MPIANA <hugues.kambampiana@arm.com>
Message-Id: <20250303170012.469576-1-hugues.kambampiana@arm.com>
(sudeep.holla: Added psci enable-method for cpu0)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The IMX8MPCEC datasheet lists maximum frequencies allowed for different
modules. Some of these limits are universal, but some depend on
whether the SoC is operating in nominal or in overdrive mode.
The imx8mp.dtsi currently assumes overdrive mode and configures some
clocks in accordance with this. Boards wishing to make use of nominal
mode will need to override some of the clock rates manually.
As operating the clocks outside of their allowed range can lead to
difficult to debug issues, it makes sense to register the maximum rates
allowed in the driver, so the CCF can take them into account.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-imx8m-clk-v4-6-b7697dc2dcd0@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The imx8m-clock.yaml binding covers the clock controller inside all
of the i.MX8M Q/M/N/P SoCs. All of them have in common that they
support two operating modes: nominal and overdrive mode.
While the overdrive mode allows for higher frequencies for many IPs,
the nominal mode needs a lower SoC voltage, thereby reducing
heat generation and power usage.
As increasing clock rates beyond the maximum permitted by the supplied
SoC voltage can lead to difficult to debug issues, device tree consumers
would benefit from knowing what mode is active to enforce the clock rate
limits that come with it.
To facilitate this, extend the clock controller bindings with an
optional fsl,operating-mode property. This intentionally allows the
absence of the property, because there is no default suitable for all
boards:
For i.MX8M Mini and Nano, the kernel SoC DTSIs has assigned-clock-rates
that are all achievable in nominal mode. For i.MX8MP, there are some
rates only validated for overdrive mode.
But even for the i.MX8M Mini/Nano boards, we don't know what rates they
may configure at runtime, so it has not been possible so far to infer from
just the device tree what the mode is.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-imx8m-clk-v4-1-b7697dc2dcd0@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add bindings for a secondary display controller present on certain
Apple laptops.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224-adpdrm-v8-1-cccf96710f0f@gmail.com
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
The DSP and OCRAM_A modules from AUDIOMIX are clocked by
AUDIO_AXI_CLK_ROOT, not AUDIO_AHB_CLK_ROOT. Update the clock data
accordingly.
Fixes: 6cd95f7b15 ("clk: imx: imx8mp: Add audiomix block control")
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250226164513.33822-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Some components of AUDIOMIX (i.e: DSP, OCRAM_A) are clocked by
AUDIO_AXI_CLK_ROOT. Since the AUDIOMIX block control manages the clock
gates for those components, include their root clock in the list of clocks
consumed by the IP.
Fixes: 95a0aa7bb1 ("dt-bindings: clock: imx8mp: Add audiomix block control")
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250226164513.33822-2-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Extract the checking of entry/exit pairs to a helper macro so that the
code can be reused to process the upcoming "secondary" exit controls (the
primary exit controls field is out of bits). Use a macro instead of a
function to support different sized variables (all secondary exit controls
will be optional and so the MSR doesn't have the fixed-0/fixed-1 split).
Taking the largest size as input is trivial, but handling the modification
of KVM's to-be-used controls is much trickier, e.g. would require bitmap
games to clear bits from a 32-bit bitmap vs. a 64-bit bitmap.
Opportunistically add sanity checks to ensure the size of the controls
match (yay, macro!), e.g. to detect bugs where KVM passes in the pairs for
primary exit controls, but its variable for the secondary exit controls.
To help users triage mismatches, print the control bits that are checked,
not just the actual value. For the foreseeable future, that provides
enough information for a user to determine which fields mismatched. E.g.
until secondary entry controls comes along, all entry bits and thus all
error messages are guaranteed to be unique.
To avoid returning from a macro, which can get quite dangerous, simply
process all pairs even if error_on_inconsistent_vmcs_config is set. The
speed at which KVM rejects module load is not at all interesting.
Keep the error message a "once" printk, even though it would be nice to
print out all mismatching pairs. In practice, the most likely scenario is
that a single pair will mismatch on all CPUs. Printing all mismatches
generates redundant messages in that situation, and can be extremely noisy
on systems with large numbers of CPUs. If a CPU has multiple mismatches,
not printing every bad pair is the least of the user's concerns.
Cc: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20250227005353.3216123-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Print out the index of mismatching XSAVE bytes using unsigned decimal
format. Some versions of clang complain about trying to print an integer
as an unsigned char.
x86/sev_smoke_test.c:55:51: error: format specifies type 'unsigned char'
but the argument has type 'int' [-Werror,-Wformat]
Fixes: 8c53183dba ("selftests: kvm: add test for transferring FPU state into VMSA")
Link: https://lore.kernel.org/r/20250228233852.3855676-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't populate the const read-only array intlv on the stack at run time,
instead make it static. This also shrinks the object size:
$ size pnd2_edac.o.*
text data bss dec hex filename
15632 264 1384 17280 4380 pnd2_edac.o.new
15644 264 1384 17292 438c pnd2_edac.o.old
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/20240919170427.497429-1-colin.i.king@gmail.com
During the initial mprotect(RO) stage of mmu_stress_test, keep vCPUs
spinning until all vCPUs have hit -EFAULT, i.e. until all vCPUs have tried
to write to a read-only page. If a vCPU manages to complete an entire
iteration of the loop without hitting a read-only page, *and* the vCPU
observes mprotect_ro_done before starting a second iteration, then the
vCPU will prematurely fall through to GUEST_SYNC(3) (on x86 and arm64) and
get out of sequence.
Replace the "do-while (!r)" loop around the associated _vcpu_run() with
a single invocation, as barring a KVM bug, the vCPU is guaranteed to hit
-EFAULT, and retrying on success is super confusion, hides KVM bugs, and
complicates this fix. The do-while loop was semi-unintentionally added
specifically to fudge around a KVM x86 bug, and said bug is unhittable
without modifying the test to force x86 down the !(x86||arm64) path.
On x86, if forced emulation is enabled, vcpu_arch_put_guest() may trigger
emulation of the store to memory. Due a (very, very) longstanding bug in
KVM x86's emulator, emulate writes to guest memory that fail during
__kvm_write_guest_page() unconditionally return KVM_EXIT_MMIO. While that
is desirable in the !memslot case, it's wrong in this case as the failure
happens due to __copy_to_user() hitting a read-only page, not an emulated
MMIO region.
But as above, x86 only uses vcpu_arch_put_guest() if the __x86_64__ guards
are clobbered to force x86 down the common path, and of course the
unexpected MMIO is a KVM bug, i.e. *should* cause a test failure.
Fixes: b6c304aec6 ("KVM: selftests: Verify KVM correctly handles mprotect(PROT_READ)")
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Closes: https://lore.kernel.org/all/20250208105318.16861-1-yan.y.zhao@intel.com
Debugged-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250228230804.3845860-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When processing an SNP AP Creation event, invalidate the "next" VMSA GPA
even if acquiring the page/pfn for the new VMSA fails. In practice, the
next GPA will never be used regardless of whether or not its invalidated,
as the entire flow is guarded by snp_ap_waiting_for_reset, and said guard
and snp_vmsa_gpa are always written as a pair. But that's really hard to
see in the code.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use guard(mutex) in sev_snp_init_protected_guest_state() and pull in its
lock-protected inner helper. Without an unlock trampoline (and even with
one), there is no real need for an inner helper. Eliminating the helper
also avoids having to fixup the open coded "lockdep" WARN_ON().
Opportunistically drop the error message if KVM can't obtain the pfn for
the new target VMSA. The error message provides zero information that
can't be gleaned from the fact that the vCPU is stuck.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Mark the VMCB dirty, i.e. zero control.clean, prior to handling the new
VMSA. Nothing in the VALID_PAGE() case touches control.clean, and
isolating the VALID_PAGE() code will allow simplifying the overall logic.
Note, the VMCB probably doesn't need to be marked dirty when the VMSA is
invalid, as KVM will disallow running the vCPU in such a state. But it
also doesn't hurt anything.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use guard(mutex) in sev_snp_ap_creation() and modify the error paths to
return directly instead of jumping to a common exit point.
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the local "kick" variable and the unnecessary "fallthrough" logic
from sev_snp_ap_creation(), and simply pivot on the request when deciding
whether or not to immediate force a state update on the target vCPU.
No functional change intended.
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When handling an "AP Create" event, return an error if the "requested" SEV
features for the vCPU don't exactly match KVM's view of the VM-scoped
features. There is no known use case for heterogeneous SEV features across
vCPUs, and while KVM can't actually enforce an exact match since the value
in RAX isn't guaranteed to match what the guest shoved into the VMSA, KVM
can at least avoid knowingly letting the guest run in an unsupported state.
E.g. if a VM is created with DebugSwap disabled, KVM will intercept #DBs
and DRs for all vCPUs, even if an AP is "created" with DebugSwap enabled in
its VMSA.
Note, the GHCB spec only "requires" that "AP use the same interrupt
injection mechanism as the BSP", but given the disaster that is DebugSwap
and SEV_FEATURES in general, it's safe to say that AMD didn't consider all
possible complications with mismatching features between the BSP and APs.
Opportunistically fold the check into the relevant request flavors; the
"request < AP_DESTROY" check is just a bizarre way of implementing the
AP_CREATE_ON_INIT => AP_CREATE fallthrough.
Fixes: e366f92ea9 ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If KVM rejects an AP Creation event, leave the target vCPU state as-is.
Nothing in the GHCB suggests the hypervisor is *allowed* to muck with vCPU
state on failure, let alone required to do so. Furthermore, kicking only
in the !ON_INIT case leads to divergent behavior, and even the "kick" case
is non-deterministic.
E.g. if an ON_INIT request fails, the guest can successfully retry if the
fixed AP Creation request is made prior to sending INIT. And if a !ON_INIT
fails, the guest can successfully retry if the fixed AP Creation request is
handled before the target vCPU processes KVM's
KVM_REQ_UPDATE_PROTECTED_GUEST_STATE.
Fixes: e366f92ea9 ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly reject KVM_RUN with KVM_EXIT_FAIL_ENTRY if userspace "coerces"
KVM into running an SEV-ES+ guest with an invalid VMSA, e.g. by modifying
a vCPU's mp_state to be RUNNABLE after an SNP vCPU has undergone a Destroy
event. On Destroy or failed Create, KVM marks the vCPU HALTED so that
*KVM* doesn't run the vCPU, but nothing prevents a misbehaving VMM from
manually making the vCPU RUNNABLE via KVM_SET_MP_STATE.
Attempting VMRUN with an invalid VMSA should be harmless, but knowingly
executing VMRUN with bad control state is at best dodgy.
Fixes: e366f92ea9 ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The res_config structs are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increase overall security, especially when the structure holds some function
pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
36777 2479 4304 43560 aa28 drivers/edac/igen6_edac.o
After:
=====
text data bss dec hex filename
37297 1959 4304 43560 aa28 drivers/edac/igen6_edac.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/a06153870951a64b438e76adf97d440e02c1a1fc.1738355198.git.christophe.jaillet@wanadoo.fr
Never rely on the CPU to restore/load host DR0..DR3 values, even if the
CPU supports DebugSwap, as there are no guarantees that SNP guests will
actually enable DebugSwap on APs. E.g. if KVM were to rely on the CPU to
load DR0..DR3 and skipped them during hw_breakpoint_restore(), KVM would
run with clobbered-to-zero DRs if an SNP guest created APs without
DebugSwap enabled.
Update the comment to explain the dangers, and hopefully prevent breaking
KVM in the future.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
