nd_attach_ndns() hasn't been used since 2017's
commit 452bae0aed ("libnvdimm: fix nvdimm_bus_lock() vs device_lock()
ordering")
Remove it.
Note the __ version is still used and has been left.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250220004538.84585-3-linux@treblig.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
nd_region_conflict() has been unused since 2019's
commit a3619190d6 ("libnvdimm/pfn: stop padding pmem namespaces to
section alignment")
Remove it, and the region_confict() helper it uses, and the associated
struct conflict_context.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250220004538.84585-2-linux@treblig.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Syzkaller has reported a warning in to_nfit_bus_uuid(): "only secondary
bus families can be translated". This warning is emited if the argument
is equal to NVDIMM_BUS_FAMILY_NFIT == 0. Function acpi_nfit_ctl() first
verifies that a user-provided value call_pkg->nd_family of type u64 is
not equal to 0. Then the value is converted to int, and only after that
is compared to NVDIMM_BUS_FAMILY_MAX. This can lead to passing an invalid
argument to acpi_nfit_ctl(), if call_pkg->nd_family is non-zero, while
the lower 32 bits are zero.
Furthermore, it is best to return EINVAL immediately upon seeing the
invalid user input. The WARNING is insufficient to prevent further
undefined behavior based on other invalid user input.
All checks of the input value should be applied to the original variable
call_pkg->nd_family.
[iweiny: update commit message]
Fixes: 6450ddbd5d ("ACPI: NFIT: Define runtime firmware activation commands")
Cc: stable@vger.kernel.org
Reported-by: syzbot+c80d8dc0d9fa81a3cd8c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c80d8dc0d9fa81a3cd8c
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250123163945.251-1-m.masimov@mt-integration.ru
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
syzbot is able to crash hosts [1], using llc and devices
not supporting IFF_TX_SKB_SHARING.
In this case, e1000 driver calls eth_skb_pad(), while
the skb is shared.
Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c
Note that e1000 driver might have an issue with pktgen,
because it does not clear IFF_TX_SKB_SHARING, this is an
orthogonal change.
We need to audit other skb_get() uses in net/llc.
[1]
kernel BUG at net/core/skbuff.c:2178 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178
Call Trace:
<TASK>
__skb_pad+0x18a/0x610 net/core/skbuff.c:2466
__skb_put_padto include/linux/skbuff.h:3843 [inline]
skb_put_padto include/linux/skbuff.h:3862 [inline]
eth_skb_pad include/linux/etherdevice.h:656 [inline]
e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128
__netdev_start_xmit include/linux/netdevice.h:5151 [inline]
netdev_start_xmit include/linux/netdevice.h:5160 [inline]
xmit_one net/core/dev.c:3806 [inline]
dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822
sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
__dev_xmit_skb net/core/dev.c:4045 [inline]
__dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621
dev_queue_xmit include/linux/netdevice.h:3313 [inline]
llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144
llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline]
llc_sap_next_state net/llc/llc_sap.c:182 [inline]
llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209
llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993
sock_sendmsg_nosec net/socket.c:718 [inline]
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+da65c993ae113742a25f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67c020c0.050a0220.222324.0011.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement Lenovo utility data WMI calls needed to make LEDs
work on Ideapads that support this GUID.
This enables the mic and audio LEDs to be updated correctly.
Tested on below samples.
ThinkBook 13X Gen4 IMH
ThinkBook 14 G6 ABP
ThinkBook 16p Gen4-21J8
ThinkBook 16 G8 IRL
ThinkBook 16 G7+ ASP
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250222114532.4105-1-xy-jackie@139.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In order to make the audmix device linked by audio graph card, make
'dais' property to be optional.
If 'dais' property exists, then register the imx-audmix card driver.
otherwise, it should be linked by audio graph card.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250226100508.2352568-5-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make 'dais' property to be optional. When there is no 'dais' property,
driver won't register the card, dts should have audio graph card node
for linking this device.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250226100508.2352568-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device can be used in conjunction with audio-graph-card to provide
an endpoint for binding with the other side of the audio link.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250226100508.2352568-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device can be used in conjunction with audio-graph-card to provide
an endpoint for binding with the other side of the audio link.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250226100508.2352568-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing difference in error handling between rpm_suspend()
and rpm_resume() related to the special way in which -EAGAIN and -EBUSY
error values are treated by the former. Also, converting -EACCES coming
from the callback to I/O error, which it quite likely is not, may
confuse runtime PM users.
To address the above, modify rpm_callback() to convert -EACCES coming
from the driver to -EAGAIN and to set power.runtime_error only if the
return value is not -EAGAIN or -EBUSY.
This will cause the error handling in rpm_resume() and rpm_suspend() to
work consistently, so drop the no longer needed -EAGAIN or -EBUSY
special case from the latter and make it retry autosuspend if
power.runtime_error is unset.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12620037.O9o76ZdvQC@rjwysocki.net
In preparation for subsequent changes, move the power.completion
reinitialization along with clearing power.work_in_progress into a
separate function called dpm_clear_async_state() and rearrange
dpm_async_fn() to get rid of unnecessary indentation.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/8494650.T7Z3S40VBb@rjwysocki.net
There are two ways to set the output voltage of the LD05
regulator. First by writing to the voltage selection registers
and second by toggling the SD_VSEL signal.
Usually board designers connect SD_VSEL to the VSELECT signal
controlled by the USDHC controller, but in some cases the
signal is hardwired to a fixed low level (therefore selecting
3.3V as initial value for allowing to boot from the SD card).
In these cases, the voltage is only determined by the value
of the LDO5CTRL_L register. Introduce a property
nxp,sd-vsel-fixed-low to let the driver know that SD_VSEL
is low and there is no GPIO to actually get that
information from dynamically.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20250303132258.50204-1-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the async_in_progress field in struct dev_pm_info to
work_in_progress as after subsequent changes it will mean work in
general rather than just async work.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3338693.aeNJFYEL58@rjwysocki.net
Modify pm_runtime_block_if_disabled() to return true when runtime PM
is disabled for the device, regardless of the power.last_status value.
This effectively prevents "smart suspend" from being enabled for
devices with runtime PM disabled in device_prepare(), even transiently,
so update the related comment in that function accordingly.
If a device has runtime PM disabled in device_prepare(), it is not
actually known whether or not runtime PM will be enabled for that
device going forward, so it is more appropriate to postpone the
"smart suspend" optimization for the device in the given system
suspend-resume cycle than to enable it and get confused going
forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/13718674.uLZWGnKmhe@rjwysocki.net
The comment in pm_runtime_blocked() is acutally wrong: power.last_status
is not a bit field. Its data type is an enum and so one can reasonably
assume that partial updates of it will not be observed.
Accordingly, pm_runtime_blocked() can be converted to a static inline
function and the related locking overhead can be eliminated, so long
as it is only used in system suspend/resume code paths because
power.last_status is not expected to be updated concurrently while
that code is running.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1923449.tdWV9SEqCh@rjwysocki.net
Put the update of the power.smart_suspend device flag under the PM
spinlock of the device in case multiple bit fields in struct dev_pm_info
occupy one memory location which needs to be updated via RMW every time
any of these bit fields is updated.
The lock in question is already held around the power.direct_complete
flag update in device_prepare() for the same reason, so this change does
not add locking-related overhead to the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2368159.ElGaqSPkdT@rjwysocki.net
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b9 ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
lockdep complains when a lock is released in a separate thread the
lock is taken in, and it turns out that kunit does run its actions in a
separate thread than the test ran in.
This means that drm_kunit_helper_acquire_ctx_alloc() just cannot work as
it's supposed to, so let's just get rid of it.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220132537.2834168-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 4204eccc7b ("ASoC: tegra: Add support for S24_LE audio format")
added support for the S24_LE audio format, but duplicated S16_LE in
OUT_DAI() for ADX instead.
Fix this by adding support for the S24_LE audio format.
Compile-tested only.
Cc: stable@vger.kernel.org
Fixes: 4204eccc7b ("ASoC: tegra: Add support for S24_LE audio format")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250222225700.539673-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Temperatures are reported in units of Celsius however hwmon expects
values to be in millidegree of Celsius. Userspace tools observe values
close to zero and report it as "Not available" or incorrect values like
0C or 1C. Add a simple conversion to fix that.
Before the change:
wsa884x-virtual-0
Adapter: Virtual device
temp1: +0.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1: +0.0°C
Also reported as N/A before first amplifier power on.
After this change and initial wsa884x power on:
wsa884x-virtual-0
Adapter: Virtual device
temp1: +39.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1: +37.0°C
Tested on sm8550 only.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250221044024.1207921-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Initialize current_be_id to 0 to handle the unlikely case when there are
no devices connected to a DAI.
In this case create_sdw_dailink() would return without touching the passed
pointer to current_be_id.
Found by gcc -fanalyzer
Fixes: 59bf457d80 ("ASoC: intel: sof_sdw: Factor out SoundWire DAI creation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250303065552.78328-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver implements support for the SPI-NAND mode of QCOM NAND Flash
Interface as a SPI-MEM controller with pipelined ECC capability.
Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250224111414.2809669-3-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the QPIC-SPI-NAND flash controller present in the IPQ SoCs.
It can work both in serial and parallel mode and supports typical
SPI-NAND page cache operations.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250224111414.2809669-2-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add device tree bindings for the STM32 OSPI controller.
Main features of the Octo-SPI controller :
- support sNOR / sNAND / HyperRAM™ and HyperFlash™ devices.
- Three functional modes: indirect, automatic-status polling,
memory-mapped.
- Up to 4 Gbytes of external memory can be addressed in indirect
mode (per physical port and per CS), and up to 256 Mbytes in
memory-mapped mode (combined for both physical ports and per CS).
- Single-, dual-, quad-, and octal-SPI communication.
- Dual-quad communication.
- Single data rate (SDR) and double transfer rate (DTR).
- Maximum target frequency is 133 MHz for SDR and 133 MHz for DTR.
- Data strobe support.
- DMA channel for indirect mode.
- Double CS mapping that allows two external flash devices to be
addressed with a single OCTOSPI controller mapped on a single
OCTOSPI port.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250219080059.367045-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Read temperature of the amplifier and expose it via hwmon interface, which
will be later used during calibration of speaker protection algorithms.
The method is the same as for wsa884x and therefore this is based on
Krzysztof Kozlowski's approach implemented in commit 6b99dc62d9 ("ASoC:
codecs: wsa884x: Implement temperature reading and hwmon").
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Link: https://patch.msgid.link/20250221032141.1206902-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2-custom-sample has many sample connections, but because
ALSA card has number limition for links, it is impossible to have all
samples into 1 ASoC card.
The sample is separated into 2 samples. Remove original sample.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt8s9hpp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2-custom-sample has many sample connections, but because
ALSA card has number limition for links, it is impossible to have all
samples into 1 ASoC card.
Separate it and took DPCM / Codec2Codec connection part.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7t89hpt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2-custom-sample has many sample connections, but because
ALSA card has number limition for links, it is impossible to have all
samples into 1 ASoC card.
Separate it and took the normal connection part.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wmdo9hq0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
