Setting the TVD PLL clock requires to multiply the target pixel
clock by a specific constant factor to achieve the target PLL
frequency, and this is done to reduce jitter to acceptable levels.
On all MediaTek SoCs, the factor is not retrieved by any real kind
of calculation but rather by checking if the target pixel clock
is less than a specified frequency, hence assigning a function
pointer for just a bunch of if branches does enlarge the code
size for little reason.
Remove all SoC-specific functions, add a structure `mtk_dpi_factor`
that holds a clock frequency and corresponding PLL factor, and
declare the constraints for each SoC in form of an array of said
structure.
Instead of function pointers, this structure (and its size) is then
assigned to each SoC's platform data.
The "calculation" is then performed with a new static function
mtk_dpi_calculate_factor(dpi, mode_clk) that iterates through all
of the entries of the aforementioned array and returns the right
factor.
If no factor is found, the lowest possible factor is returned,
mimicking the same flow as all of the old per-SoC calculation
functions.
This commit brings no functional change.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This IP includes a Pattern Generator which is useful for debugging
and testing purposes: add the relevant register and bits to the
mtk_dpi_regs.h header, and implement support for it in mtk_dpi.
Adding this required to introduce a .debugfs_init() callback for
the DPI bridge, which creates a "dpi_test_pattern" file in the
directory of the appropriate connector.
The pattern generator can generate various internal patterns and
this submission includes support for:
- 256 or 1024 shades of gray in a Vertical or Horizontal Pattern
- Vertical Color Bars
- Frame border
- Dot Moire
This generator also supports filling the entire screen with one
custom color, but support for that is not included in this commit.
Enabling and disabling this generator can be done by sending a
string to the dpi_test_pattern debugfs file; the pattern is
expected to be formatted as follows:
<enable (1) or disable (0)> <pattern number>
where the pattern number can be a number from 0 to 7, excluding 5.
Of course 5 is excluded because that activates custom color fill
which, again, is not supported in this commit.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add compatibles for the Digital Parallel Interface (DPI) block
found in the MT8195 and MT8188 SoCs: inside of the chip, this one
is directly connected to the HDMI block.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
When KVM is in protected mode, host calls to PSCI are proxied via EL2,
and cold entries from CPU_ON, CPU_SUSPEND, and SYSTEM_SUSPEND bounce
through __kvm_hyp_init_cpu() at EL2 before entering the host kernel's
entry point at EL1. While __kvm_hyp_init_cpu() initializes SPSR_EL2 for
the exception return to EL1, it does not initialize SCTLR_EL1.
Due to this, it's possible to enter EL1 with SCTLR_EL1 in an UNKNOWN
state. In practice this has been seen to result in kernel crashes after
CPU_ON as a result of SCTLR_EL1.M being 1 in violation of the initial
core configuration specified by PSCI.
Fix this by initializing SCTLR_EL1 for cold entry to the host kernel.
As it's necessary to write to SCTLR_EL12 in VHE mode, this
initialization is moved into __kvm_host_psci_cpu_entry() where we can
use write_sysreg_el1().
The remnants of the '__init_el2_nvhe_prepare_eret' macro are folded into
its only caller, as this is clearer than having the macro.
Fixes: cdf3671927 ("KVM: arm64: Intercept host's CPU_ON SMCs")
Reported-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ahmed Genidi <ahmed.genidi@arm.com>
[ Mark: clarify commit message, handle E2H, move to C, remove macro ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250227180526.1204723-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
On CPUs without FEAT_E2H0, HCR_EL2.E2H is RES1, but may reset to an
UNKNOWN value out of reset and consequently may not read as 1 unless it
has been explicitly initialized.
We handled this for the head.S boot code in commits:
3944382fa6 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
b3320142f3 ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Unfortunately, we forgot to apply a similar fix to the KVM PSCI entry
points used when relaying CPU_ON, CPU_SUSPEND, and SYSTEM SUSPEND. When
KVM is entered via these entry points, the value of HCR_EL2.E2H may be
consumed before it has been initialized (e.g. by the 'init_el2_state'
macro).
Initialize HCR_EL2.E2H early in these paths such that it can be consumed
reliably. The existing code in head.S is factored out into a new
'init_el2_hcr' macro, and this is used in the __kvm_hyp_init_cpu()
function common to all the relevant PSCI entry points.
For clarity, I've tweaked the assembly used to check whether
ID_AA64MMFR4_EL1.E2H0 is negative. The bitfield is extracted as a signed
value, and this is checked with a signed-greater-or-equal (GE) comparison.
As the hyp code will reconfigure HCR_EL2 later in ___kvm_hyp_init(), all
bits other than E2H are initialized to zero in __kvm_hyp_init_cpu().
Fixes: 3944382fa6 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
Fixes: b3320142f3 ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250227180526.1204723-2-mark.rutland@arm.com
[maz: fixed LT->GE thinko]
Signed-off-by: Marc Zyngier <maz@kernel.org>
snd_seq_client_use_ptr() is supposed to return the snd_seq_client
object for the given client ID, and it tries to handle the module
auto-loading when no matching object is found. Although the module
handling is performed only conditionally with "!in_interrupt()", this
condition may be fragile, e.g. when the code is called from the ALSA
timer callback where the spinlock is temporarily disabled while the
irq is disabled. Then his doesn't fit well and spews the error about
sleep from invalid context, as complained recently by syzbot.
Also, in general, handling the module-loading at each time if no
matching object is found is really an overkill. It can be still
useful when performed at the top-level ioctl or proc reads, but it
shouldn't be done at event delivery at all.
For addressing the issues above, this patch disables the module
handling in snd_seq_client_use_ptr() in normal cases like event
deliveries, but allow only in limited and safe situations.
A new function client_load_and_use_ptr() is used for the cases where
the module loading can be done safely, instead.
Reported-by: syzbot+4cb9fad083898f54c517@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67c272e5.050a0220.dc10f.0159.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250301114530.8975-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ARCH_MAY_HAVE patch missed arm64, mips and s390. But it may
also lead to arch options being enabled but ineffective because
of modular/built-in conflicts.
As the primary user of all these options wireguard is selecting
the arch options anyway, make the same selections at the lib/crypto
option level and hide the arch options from the user.
Instead of selecting them centrally from lib/crypto, simply set
the default of each arch option as suggested by Eric Biggers.
Change the Crypto API generic algorithms to select the top-level
lib/crypto options instead of the generic one as otherwise there
is no way to enable the arch options (Eric Biggers). Introduce a
set of INTERNAL options to work around dependency cycles on the
CONFIG_CRYPTO symbol.
Fixes: 1047e21aec ("crypto: lib/Kconfig - Fix lib built-in failure when arch is modular")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202502232152.JC84YDLp-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than accessing 'alg' directly to avoid the aliasing issue
which leads to unnecessary reloads, use the __restrict keyword
to explicitly tell the compiler that there is no aliasing.
This generates equivalent if not superior code on x86 with gcc 12.
Note that in skcipher_walk_virt the alg assignment is moved after
might_sleep_if because that function is a compiler barrier and
forces a reload.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
otx_cpt_eng_grp_has_eng_type() was added in 2020 by
commit d9110b0b01 ("crypto: marvell - add support for OCTEON TX CPT
engine")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
otx2_cpt_print_uc_dbg_info() has been unused since 2023's
commit 82f89f1aa6 ("crypto: octeontx2 - add devlink option to set t106
mode")
Remove it and the get_engs_info() helper it's the only user of.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the Freescale security engine (crypto accelerator) binding from
text form to YAML. The list of compatible strings reflects what was
previously described in prose; not all combinations occur in existing
devicetrees.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When !HIGHMEM, the kmap_local_page() in the scatterlist walker does not
actually map anything, and the address it returns is just the address
from the kernel's direct map, where each sg entry's data is virtually
contiguous. To improve performance, stop unnecessarily clamping data
segments to page boundaries in this case.
For now, still limit segments to PAGE_SIZE. This is needed to prevent
preemption from being disabled for too long when SIMD is used, and to
support the alignmask case which still uses a page-sized bounce buffer.
Even so, this change still helps a lot in cases where messages cross a
page boundary. For example, testing IPsec with AES-GCM on x86_64, the
messages are 1424 bytes which is less than PAGE_SIZE, but on the Rx side
over a third cross a page boundary. These ended up being processed in
three parts, with the middle part going through skcipher_next_slow which
uses a 16-byte bounce buffer. That was causing a significant amount of
overhead which unnecessarily reduced the performance benefit of the new
x86_64 AES-GCM assembly code. This change solves the problem; all these
messages now get passed to the assembly code in one part.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove various functions that are no longer used.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert skcipher_walk to use the new scatterwalk functions.
This includes a few changes to exactly where the different parts of the
iteration happen. For example the dcache flush that previously happened
in scatterwalk_done() now happens in scatterwalk_dst_done() or in
memcpy_to_scatterwalk(). Advancing to the next sg entry now happens
just-in-time in scatterwalk_clamp() instead of in scatterwalk_done().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace calls to the deprecated function scatterwalk_copychunks() with
memcpy_from_scatterwalk(), memcpy_to_scatterwalk(), or
scatterwalk_skip() as appropriate. The new functions generally behave
more as expected and eliminate the need to call scatterwalk_done() or
scatterwalk_pagedone().
However, the new functions intentionally do not advance to the next sg
entry right away, which would have broken chain_to_walk() which is
accessing the fields of struct scatter_walk directly. To avoid this,
replace chain_to_walk() with scatterwalk_get_sglist() which supports the
needed functionality.
Cc: Boris Pismenny <borisp@nvidia.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In crypto_aegis128_aesni_process_ad(), use scatterwalk_next() which
consolidates scatterwalk_clamp() and scatterwalk_map(). Use
scatterwalk_done_src() which consolidates scatterwalk_unmap(),
scatterwalk_advance(), and scatterwalk_done().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In gcm_process_assoc(), use scatterwalk_next() which consolidates
scatterwalk_clamp() and scatterwalk_map(). Use scatterwalk_done_src()
which consolidates scatterwalk_unmap(), scatterwalk_advance(), and
scatterwalk_done().
Also rename some variables to avoid implying that anything is actually
mapped (it's not), or that the loop is going page by page (it is for
now, but nothing actually requires that to be the case).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace calls to the deprecated function scatterwalk_copychunks() with
memcpy_from_scatterwalk(), memcpy_to_scatterwalk(), scatterwalk_skip(),
or scatterwalk_start_at_pos() as appropriate.
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Maxime Méré <maxime.mere@foss.st.com>
Cc: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
s5p_sg_copy_buf() open-coded a copy from/to a scatterlist using
scatterwalk_* functions that are planned for removal. Replace it with
the new functions memcpy_from_sglist() and memcpy_to_sglist() instead.
Also take the opportunity to replace calls to scatterwalk_map_and_copy()
in the same file; this eliminates the confusing 'out' argument.
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use scatterwalk_next() which consolidates scatterwalk_clamp() and
scatterwalk_map(). Use scatterwalk_done_src() and
scatterwalk_done_dst() which consolidate scatterwalk_unmap(),
scatterwalk_advance(), and scatterwalk_done().
Besides the new functions being a bit easier to use, this is necessary
because scatterwalk_done() is planned to be removed.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Cc: Holger Dengler <dengler@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- In nx_walk_and_build(), use scatterwalk_start_at_pos() instead of a
more complex way to achieve the same result.
- Also in nx_walk_and_build(), use the new functions scatterwalk_next()
which consolidates scatterwalk_clamp() and scatterwalk_map(), and use
scatterwalk_done_src() which consolidates scatterwalk_unmap(),
scatterwalk_advance(), and scatterwalk_done(). Remove unnecessary
code that seemed to be intended to advance to the next sg entry, which
is already handled by the scatterwalk functions.
Note that nx_walk_and_build() does not actually read or write the
mapped virtual address, and thus it is misusing the scatter_walk API.
It really should just access the scatterlist directly. This patch
does not try to address this existing issue.
- In nx_gca(), use memcpy_from_sglist() instead of a more complex way to
achieve the same result.
- In various functions, replace calls to scatterwalk_map_and_copy() with
memcpy_from_sglist() or memcpy_to_sglist() as appropriate. Note that
this eliminates the confusing 'out' argument (which this driver had
tried to work around by defining the missing constants for it...)
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use scatterwalk_next() which consolidates scatterwalk_clamp() and
scatterwalk_map(), and use scatterwalk_done_src() which consolidates
scatterwalk_unmap(), scatterwalk_advance(), and scatterwalk_done().
Remove unnecessary code that seemed to be intended to advance to the
next sg entry, which is already handled by the scatterwalk functions.
Adjust variable naming slightly to keep things consistent.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use scatterwalk_next() which consolidates scatterwalk_clamp() and
scatterwalk_map(), and use scatterwalk_done_src() which consolidates
scatterwalk_unmap(), scatterwalk_advance(), and scatterwalk_done().
Remove unnecessary code that seemed to be intended to advance to the
next sg entry, which is already handled by the scatterwalk functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use scatterwalk_next() which consolidates scatterwalk_clamp() and
scatterwalk_map(), and use scatterwalk_done_src() which consolidates
scatterwalk_unmap(), scatterwalk_advance(), and scatterwalk_done().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In skcipher_walk_aead_common(), use scatterwalk_start_at_pos() instead
of a sequence of scatterwalk_start(), scatterwalk_copychunks(..., 2),
and scatterwalk_done(). This is simpler and faster.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a function that creates a scatterlist that represents the remaining
data in a walk. This will be used to replace chain_to_walk() in
net/tls/tls_device_fallback.c so that it will no longer need to reach
into the internals of struct scatter_walk.
Cc: Boris Pismenny <borisp@nvidia.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add memcpy_from_sglist() and memcpy_to_sglist() which are more readable
versions of scatterwalk_map_and_copy() with the 'out' argument 0 and 1
respectively. They follow the same argument order as memcpy_from_page()
and memcpy_to_page() from <linux/highmem.h>. Note that in the case of
memcpy_from_sglist(), this also happens to be the same argument order
that scatterwalk_map_and_copy() uses.
The new code is also faster, mainly because it builds the scatter_walk
directly without creating a temporary scatterlist. E.g., a 20%
performance improvement is seen for copying the AES-GCM auth tag.
Make scatterwalk_map_and_copy() be a wrapper around memcpy_from_sglist()
and memcpy_to_sglist(). Callers of scatterwalk_map_and_copy() should be
updated to call memcpy_from_sglist() or memcpy_to_sglist() directly, but
there are a lot of them so they aren't all being updated right away.
Also add functions memcpy_from_scatterwalk() and memcpy_to_scatterwalk()
which are similar but operate on a scatter_walk instead of a
scatterlist. These will replace scatterwalk_copychunks() with the 'out'
argument 0 and 1 respectively. Their behavior differs slightly from
scatterwalk_copychunks() in that they automatically take care of
flushing the dcache when needed, making them easier to use.
scatterwalk_copychunks() itself is left unchanged for now. It will be
removed after its callers are updated to use other functions instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add scatterwalk_next() which consolidates scatterwalk_clamp() and
scatterwalk_map(). Also add scatterwalk_done_src() and
scatterwalk_done_dst() which consolidate scatterwalk_unmap(),
scatterwalk_advance(), and scatterwalk_done() or scatterwalk_pagedone().
A later patch will remove scatterwalk_done() and scatterwalk_pagedone().
The new code eliminates the error-prone 'more' parameter. Advancing to
the next sg entry now only happens just-in-time in scatterwalk_next().
The new code also pairs the dcache flush more closely with the actual
write, similar to memcpy_to_page(). Previously it was paired with
advancing to the next page. This is currently causing bugs where the
dcache flush is incorrectly being skipped, usually due to
scatterwalk_copychunks() being called without a following
scatterwalk_done(). The dcache flush may have been placed where it was
in order to not call flush_dcache_page() redundantly when visiting a
page more than once. However, that case is rare in practice, and most
architectures either do not implement flush_dcache_page() anyway or
implement it lazily where it just clears a page flag.
Another limitation of the old code was that by the time the flush
happened, there was no way to tell if more than one page needed to be
flushed. That has been sufficient because the code goes page by page,
but I would like to optimize that on !HIGHMEM platforms. The new code
makes this possible, and a later patch will implement this optimization.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add scatterwalk_skip() to skip the given number of bytes in a
scatter_walk. Previously support for skipping was provided through
scatterwalk_copychunks(..., 2) followed by scatterwalk_done(), which was
confusing and less efficient.
Also add scatterwalk_start_at_pos() which starts a scatter_walk at the
given position, equivalent to scatterwalk_start() + scatterwalk_skip().
This addresses another common need in a more streamlined way.
Later patches will convert various users to use these functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The scatterwalk_* functions are designed to advance to the next sg entry
only when there is more data from the request to process. Compared to
the alternative of advancing after each step if !sg_is_last(sg), this
has the advantage that it doesn't cause problems if users accidentally
don't terminate their scatterlist with the end marker (which is an easy
mistake to make, and there are examples of this).
Currently, the advance to the next sg entry happens in
scatterwalk_done(), which is called after each "step" of the walk. It
requires the caller to pass in a boolean 'more' that indicates whether
there is more data. This works when the caller immediately knows
whether there is more data, though it adds some complexity. However in
the case of scatterwalk_copychunks() it's not immediately known whether
there is more data, so the call to scatterwalk_done() has to happen
higher up the stack. This is error-prone, and indeed the needed call to
scatterwalk_done() is not always made, e.g. scatterwalk_copychunks() is
sometimes called multiple times in a row. This causes a zero-length
step to get added in some cases, which is unexpected and seems to work
only by accident.
This patch begins the switch to a less error-prone approach where the
advance to the next sg entry happens just in time instead. For now,
that means just doing the advance in scatterwalk_clamp() if it's needed
there. Initially this is redundant, but it's needed to keep the tree in
a working state as later patches change things to the final state.
Later patches will similarly move the dcache flushing logic out of
scatterwalk_done() and then remove scatterwalk_done() entirely.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the indentation of the help text of the HW_RANDOM_CN10K symbol
from one TAB plus one space to one TAB plus two spaces, as is customary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All modules should have a description, building with extra warnings
enabled prints this outfor the for bpf_crypto_skcipher module:
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/bpf_crypto_skcipher.o
Add a description line.
Fixes: fda4f71282 ("bpf: crypto: add skcipher to bpf crypto")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Fix a sporadic boot failure due to incorrect randomization of the
linear map on systems that support it
- Fix the zapping (both clearing the entries *and* invalidating the TLB)
of hugetlb PTEs constructed using the contiguous bit
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmfDdBIQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNN0GB/9gmEOX1GwMU6wFjPYqvjWlkGCFDwrldO84
uF9jEUbPaw3P4xHTOFyPCfEWidktqa+yDVbe90mB7GVOM+1eEZ81em1k1hYBEXbz
Q73Nl5VrNzxX4BjOrdxxoTSaR/TKklUh5mqWfIzy1RxEnBfpr/GuDPtUn1GViCAs
sU16Ju12UdYXn3tyHFDHpjZS9WYZskfnrvS0QvXinz0LahZrCkeaH+ptYHrTjMFx
hxyrRQwOlqLnZWvjLOegH9AC6uyRkKDinXKhXqHYvUfcfEkQsKwM7Fpc6cviUD0Q
X2npLNegnYxPniwmLpXfNXazPDnKVMzxb9lpqw1fZS3nAuh8XOde
=RqDZ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Ryan's been hard at work finding and fixing mm bugs in the arm64 code,
so here's a small crop of fixes for -rc5.
The main changes are to fix our zapping of non-present PTEs for
hugetlb entries created using the contiguous bit in the page-table
rather than a block entry at the level above. Prior to these fixes, we
were pulling the contiguous bit back out of the PTE in order to
determine the size of the hugetlb page but this is clearly bogus if
the thing isn't present and consequently both the clearing of the
PTE(s) and the TLB invalidation were unreliable.
Although the problem was found by code inspection, we really don't
want this sitting around waiting to trigger and the changes are CC'd
to stable accordingly.
Note that the diffstat looks a lot worse than it really is;
huge_ptep_get_and_clear() now takes a size argument from the core code
and so all the arch implementations of that have been updated in a
pretty mechanical fashion.
- Fix a sporadic boot failure due to incorrect randomization of the
linear map on systems that support it
- Fix the zapping (both clearing the entries *and* invalidating the
TLB) of hugetlb PTEs constructed using the contiguous bit"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Fix flush_hugetlb_tlb_range() invalidation level
arm64: hugetlb: Fix huge_ptep_get_and_clear() for non-present ptes
mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()
arm64/mm: Fix Boot panic on Ampere Altra
Drop unused headers and type declaration from io.h.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Include headers for the symbols directly used in this file instead of
relying on intermediate headers.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are two incompatible sets of definitions of these eight functions:
On 64-bit architectures setting CONFIG_HAS_IOPORT, they turn into
either pair of 32-bit PIO (inl/outl) accesses or a single 64-bit MMIO
(readq/writeq). On other 64-bit architectures, they are always split
into 32-bit accesses.
Depending on which header gets included in a driver, there are
additionally definitions for ioread64()/iowrite64() that are
expected to produce a 64-bit register MMIO access on all 64-bit
architectures.
To separate the conflicting definitions, make the version in
include/linux/io-64-nonatomic-*.h visible on all architectures
but pick the one from lib/iomap.c on architectures that set
CONFIG_GENERIC_IOMAP in place of the default fallback.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is a fairly obvious race between perf_init_event() doing
idr_find() and perf_pmu_register() doing idr_alloc() with an
incompletely initialized PMU pointer.
Avoid by doing idr_alloc() on a NULL pointer to register the id, and
swizzling the real struct pmu pointer at the end using idr_replace().
Also making sure to not set struct pmu members after publishing
the struct pmu, duh.
[ introduce idr_cmpxchg() in order to better handle the idr_replace()
error case -- if it were to return an unexpected pointer, it will
already have replaced the value and there is no going back. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.858805880@infradead.org
Commit a63fbed776 ("perf/tracing/cpuhotplug: Fix locking order")
placed pmus_lock inside pmus_srcu, this makes perf_pmu_unregister()
trip lockdep.
Move the locking about such that only pmu_idr and pmus (list) are
modified while holding pmus_lock. This avoids doing synchronize_srcu()
while holding pmus_lock and all is well again.
Fixes: a63fbed776 ("perf/tracing/cpuhotplug: Fix locking order")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.679556858@infradead.org
Turns out that this commit, about 10 years ago:
9ec23531fd ("sched/preempt, mm/fault: Trigger might_sleep() in might_fault() with disabled pagefaults")
... accidentally (and unnessecarily) put the lockdep part of
__might_fault() under CONFIG_DEBUG_ATOMIC_SLEEP=y.
This is potentially notable because large distributions such as
Ubuntu are running with !CONFIG_DEBUG_ATOMIC_SLEEP.
Restore the debug check.
[ mingo: Update changelog. ]
Fixes: 9ec23531fd ("sched/preempt, mm/fault: Trigger might_sleep() in might_fault() with disabled pagefaults")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20241104135517.536628371@infradead.org
- Fix a regression where the enablement of the PHYs would be skipped
for device trees without any port child nodes. (me)
- Revert ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives, as it stops
systems from entering lower package states. LPM works on newer
firmware versions. We will need a more refined quirk that only
targets the older firmware versions. (me)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZ8LWcAAKCRDJZDGjmcZN
cgnDAP4gp/4Rly/E09WeSCFDtysqa6EriaUliSeNBZBCtZVIfgEAkTk/MjLxa4SR
qmfUe0XtjqZlFs/WyKvqwD+lSSxOKwA=
=LZ2Z
-----END PGP SIGNATURE-----
Merge tag 'ata-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Fix a regression where the enablement of the PHYs would be skipped
for device trees without any port child nodes (me)
- Revert ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives, as it stops
systems from entering lower package states. LPM works on newer
firmware versions. We will need a more refined quirk that only
targets the older firmware versions (me)
* tag 'ata-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
Revert "ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives"
ata: ahci: Make ahci_ignore_port() handle empty mask_port_map
* Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2
and not mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
* Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly
race that would lead to running with an unallocated VMID.
RISC-V:
* Fix hart status check in SBI HSM extension
* Fix hart suspend_type usage in SBI HSM extension
* Fix error returned by SBI IPI and TIME extensions for
unsupported function IDs
* Fix suspend_type usage in SBI SUSP extension
* Remove unnecessary vcpu kick after injecting interrupt
via IMSIC guest file
x86:
* Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
* To avoid freeing the PIC while vCPUs are still around, which
would cause a NULL pointer access with the previous patch,
destroy vCPUs before any VM-level destruction.
* Handle failures to create vhost_tasks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfCvVsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPqGwf9FOWQRd/yCKHiufjPDefD1Og0DmgB
Dgk0nmHxaxbyPw+5vYlhn/J3vZ54sNngBpmUekE5OuBMZ9EsxXAK/myByHkzNnV9
cyLm4vYwpb9OQmbQ5MMdDlptYsjV40EmSfwwIJpBxjdkwAI3f7NgeHvG8EwkJgch
C+X4JMrLu2+BGo7BUhuE/xrB8h0CBRnhalB5aK1wuF+ey8v06zcU0zdQCRLUpOsx
mW9S0OpSpSlecvcblr0AhuajjHjwFaTFOQofaXaQFBW6kv3dXmSq/JRABEfx0TBb
MTUDQtnnaYvPy/RWwZIzBpgfASLQNQNxSJ7DIw9C8IG7k6rK25BSRwTmSw==
=afMB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
This is a basic implementation of the clock driver required by
Samsung's Exynos7870 SoC. It implements CMU_MIF, CMU_DISPAUD, CMU_FSYS,
CMU_G3D, CMU_ISP, CMU_MFCMSCL, and CMU_PERI. all other CMUs depend on
CMU_MIF.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmu-clocks-v5-2-715b646d5206@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CMU_TOP is the top level clock management unit which contains PLLs,
muxes, dividers and gates that feed the other clock management units.
CMU_ALIVE provides clocks for SPMI, the new MCT and other clock
management units
CMU_CMGP provides clocks for USI blocks
CMU_HSI0 provides clocks for USB
CMU_PERIC0 provides clocks for USI4 and I3C blocks
CMU_PERIC1 provides clocks for USI blocks
CMU_PERIC2 provides clocks for USI and I3C blocks
CMU_PERIS provides clocks for GIC and the legacy MCT
CMU_UFS provides clocks for UFS
CMU_VTS provides clocks for other clock management units
like CMU_AUD, which will be added in the future.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250223115601.723886-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
pll4311 (also known in the vendor kernel as frd_4311_rpll) is a PLL used
in the Exynos2200 SoC. It's an integer/fractional PLL with mid frequency
FVCO (650 to 3500Mhz).
The PLL is functionally similar enough to pll531x, so the same code can
handle both.
Locktime for pll4311 is 500 - the same as the pll531x lock factor. MDIV,
PDIV, SDIV and FDIV masks and bit shifts are also the same as pll531x.
When defining a PLL, the "con" parameter should be set to CON3
register, like this:
PLL(pll_4311, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0, NULL),
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250223115601.723886-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add unique identifiers for exynos7870 clocks for every bank. It adds all
clocks of CMU_MIF, CMU_DISPAUD, CMU_G3D, CMU_ISP, CMU_MFCMSCL, and
CMU_PERI. Document the devicetree bindings as well.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmu-clocks-v5-1-715b646d5206@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
