Building perf in-tree is broken after commit 890a1961c8 ("perf tools:
Create source symlink in perf object dir") which added a 'source' symlink
in the output dir pointing to the source dir.
With in-tree builds, the added 'SOURCE = ...' line is executed multiple
times (I observed 2 during the build plus 2 during installation). This is a
minor inefficiency, in theory not harmful because symlink creation is
assumed to be idempotent. But it is not.
Considering with in-tree builds:
srctree=/absolute/path/to/linux
OUTPUT=/absolute/path/to/linux/tools/perf
here's what happens:
1. ln -sf $(srctree)/tools/perf $(OUTPUT)/source
-> creates /absolute/path/to/linux/tools/perf/source
link to /absolute/path/to/linux/tools/perf
=> OK, that's what was intended
2. ln -sf $(srctree)/tools/perf $(OUTPUT)/source # same command as 1
-> creates /absolute/path/to/linux/tools/perf/perf
link to /absolute/path/to/linux/tools/perf
=> Not what was intended, not idempotent
3. Now the build _should_ create the 'perf' executable, but it fails
The reason is the tricky 'ln' command line. At the first invocation 'ln'
uses the 1st form:
ln [OPTION]... [-T] TARGET LINK_NAME
and creates a link to TARGET *called LINK_NAME*.
At the second invocation $(OUTPUT)/source exists, so 'ln' uses the 3rd
form:
ln [OPTION]... TARGET... DIRECTORY
and creates a link to TARGET *called TARGET* inside DIRECTORY.
Fix by adding -n/--no-dereference to "treat LINK_NAME as a normal file
if it is a symbolic link to a directory", as the manpage says.
Closes: https://lore.kernel.org/all/20241125182506.38af9907@booty/
Fixes: 890a1961c8 ("perf tools: Create source symlink in perf object dir")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250124-perf-fix-intree-build-v1-1-485dd7a855e4@bootlin.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In __udp_gso_segment the skb destructor is removed before segmenting the
skb but the socket reference is kept as-is. This is an issue if the
original skb is later orphaned as we can hit the following bug:
kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan)
RIP: 0010:ip_rcv_core+0x8b2/0xca0
Call Trace:
ip_rcv+0xab/0x6e0
__netif_receive_skb_one_core+0x168/0x1b0
process_backlog+0x384/0x1100
__napi_poll.constprop.0+0xa1/0x370
net_rx_action+0x925/0xe50
The above can happen following a sequence of events when using
OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an
OVS_ACTION_ATTR_OUTPUT action:
1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb
goes through queue_gso_packets and then __udp_gso_segment, where its
destructor is removed.
2. The segments' data are copied and sent to userspace.
3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the
same original skb is sent to its path.
4. If it later hits skb_orphan, we hit the bug.
Fix this by also removing the reference to the socket in
__udp_gso_segment.
Fixes: ad405857b1 ("udp: better wmem accounting on gso")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250226171352.258045-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We shouldn't be setting incompatible bits or the incompatible version
field unless explicitly request or allowed - otherwise we break mounting
with old kernels or userspace.
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry
in a link list that gets freed. Then when a new entry is added
it can cause a u-a-f bug. This is fixed by restructuring the code
so that the histogram is consistent on failure and everything is
cleaned up appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now
does so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly.
It counts the functions in the file, but if there's already functions
in the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of
the function times can overflow. If the overflow happens to land
on zero, that can cause a division by zero. Check for zero from
the calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly.
For now, just prevent the system from crashing.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ8HqYBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpoXAP90gvO2LfjItjZVjBYudr4GOzcsjAAK
cZ2vL2LJp3hT4QD+Kud2YaZqzrV8tvFFBikO7FvEV3zZpnw48895pIgcoww=
=NLe0
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
When emulating HLT and a wake event is already pending, explicitly mark
the vCPU RUNNABLE (via kvm_set_mp_state()) instead of assuming the vCPU is
already in the appropriate state. Barring a KVM bug, it should be
impossible for the vCPU to be in a non-RUNNABLE state, but there is no
advantage to relying on that to hold true, and ensuring the vCPU is made
RUNNABLE avoids non-deterministic behavior with respect to pv_unhalted.
E.g. if the vCPU is not already RUNNABLE, then depending on when
pv_unhalted is set, KVM could either leave the vCPU in the non-RUNNABLE
state (set before __kvm_emulate_halt()), or transition the vCPU to HALTED
and then RUNNABLE (pv_unhalted set after the kvm_vcpu_has_events() check).
Link: https://lore.kernel.org/r/20250224174156.2362059-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If the CPU supports Idle HLT, which elides HLT VM-Exits if the vCPU has an
unmasked pending IRQ or NMI, relax the xAPIC IPI test's assertion on the
number of HLT exits to only require that the number of exits is less than
or equal to the number of HLT instructions that were executed. I.e. don't
fail the test if Idle HLT does what it's supposed to do.
Note, unfortunately there's no way to determine if *KVM* supports Idle HLT,
as this_cpu_has() checks raw CPU support, and kvm_cpu_has() checks what can
be exposed to L1, i.e. the latter would check if KVM supports nested Idle
HLT. But, since the assert is purely bonus coverage, checking for CPU
support is good enough.
Cc: Manali Shukla <Manali.Shukla@amd.com>
Tested-by: Manali Shukla <Manali.Shukla@amd.com>
Link: https://lore.kernel.org/r/20250226231809.3183093-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Preparing CONFIG_PWM becoming tristate the right magic to check for the
availability of the pwm functions is using IS_REACHABLE() and not
IS_ENABLED(). The latter gives the wrong result for built-in code with
CONFIG_PWM=m.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250217102504.687916-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The PWM core on Rockchip's RK3562 is the same as the one already
included in RK3328. Extend the binding accordingly to allow
compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227111913.2344207-11-kever.yang@rock-chips.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Eric Dumazet says:
====================
inet: ping: remove extra skb_clone()/consume_skb()
First patch in the series moves ICMP_EXT_ECHOREPLY handling in icmp_rcv()
to prepare the second patch.
The second patch removes one skb_clone()/consume_skb() pair
when processing ICMP_EXT_REPLY packets. Some people
use hundreds of "ping -fq ..." to stress hosts :)
====================
Link: https://patch.msgid.link/20250226183437.1457318-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ping_rcv() callers currently call skb_free() or consume_skb(),
forcing ping_rcv() to clone the skb.
After this patch ping_rcv() is now 'consuming' the original skb,
either moving to a socket receive queue, or dropping it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250226183437.1457318-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no point processing ICMP_EXT_ECHOREPLY for routes
which would drop ICMP_ECHOREPLY (RFC 1122 3.2.2.6, 3.2.2.8)
This seems an oversight of the initial implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250226183437.1457318-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mgmt: Check return of mgmt_alloc_skb
- btusb: Initialize .owner field of force_poll_sync_fops
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmfA6NcZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKfI/EACPkI/oXeWj5dj+t2QXE0MZ
J74aGQUg31G4GSlFG8VKf72NPr1tEnhk3kbSZFi14MnkXpSKGSew0FS1qSmszSub
lZZmRmj3If4jS6+l0iD89bMJip4TDSLez4PwRzYzCKuK6WdyHBl3JB+B3xeSqLI3
hcOa5ZI3pC317RaVevsxFy2uNvGEJ+ftktcLQBQNr5XQaBjt+vynV9Lf6jwBjHPQ
SDzJ3jmG7ZYAHBZ1n0u2jZNeIImhTATjZMm1pgu+eHl2pX+BxX4Rpu1T2zykLnI5
JWHVF2c3OpXJ6xnqrfZFA/lNosX0U3/A7goP89HqwL+M4U7SSFiTfliQkaP0OsF3
5n5mD+Nk9/ztgWsMN88G8QSMdrvfIwpvd0wEiXvErPaoYQ3jOT2+4Gk43cXswpd/
lxwtuVSC2xk9UT/f39Dah/3VlDfBMO+I7Camvuj4rGGkQaVlmTrQm71T9e8t2eWW
V0lW6G0WcXRmiEob5n4TfnX+8TrlPSNLhcVDV9Wnnklavh+K52nMpgoOYBdR6Ixo
BIi2EIixsd/W61J6WjOdROdZQfem1SgdjmC0GUK/r2IZhDImDeF5d5L0wUo4n0ok
jVoXeBu/FGFoC3yuI/BrbO49Ll4VVXezHAjRyMLSPLwGDc+dHc1jKmmLBHXf2frd
YUtS5Gess3iav/b1LAYdkA==
=+Wfp
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- mgmt: Check return of mgmt_alloc_skb
- btusb: Initialize .owner field of force_poll_sync_fops
* tag 'for-net-2025-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected()
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_remote_name()
bluetooth: btusb: Initialize .owner field of force_poll_sync_fops
====================
Link: https://patch.msgid.link/20250227223802.3299088-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Rockchip RK3562 GPU is ARM Mali-G52, use the same driver with
"arm,mali-bifrost". Extend the binding accordingly to allow
compatible = "rockchip,rk3562-mali", "arm,mali-bifrost";
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227111913.2344207-6-kever.yang@rock-chips.com
Document the device tree bindings of the rockchip rk3562 SoC
clock and reset unit.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227105916.2340856-2-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Property "supports-sd" isn't documented anywhere and is unnecessary for
mainline driver to function. It seems a property used by downstream
kernel was brought into mainline.
This should be reported by dtbs_check, but mmc-controller-common.yaml
defaults additionalProperties to true thus allows it. Remove the
property to clean the devicetree up and avoid possible confusion.
Fixes: 8d94da58de ("arm64: dts: rockchip: Add EmbedFire LubanCat 1")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250228163117.47318-2-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Jaguar has two type-c ports connected to fusb302 controllers that can
work both in host and device mode and can also run in display-port
altmode.
While these ports can work in dual-role data mode, they do not support
powering the device itself as power-sink. This causes issues because
the current infrastructure does not cope well with dual-role data
without dual-role power.
So add the necessary nodes for the type-c controllers as well as enable
the relevant core usb nodes. So far host modes works reliably, but
device-mode does not. So devicemode needs more investigation.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250228150853.329175-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Certain messages from DCP contain NUL bytes in the random data after the
NUL terminated syslog message. Since the syslog message ends with '\n'
this results in a dev_info() message terminated with two newlines and an
empty printed line in the kernel log.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-4-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
rtkit messages as communication with the DCP firmware for framebuffer
swaps or input events are time critical so use WQ_HIGHPRI to prevent
user space CPU load to increase latency.
With kwin_wayland 6's explicit sync mode user space load was able to
delay the IOMFB rtkit communication enough to miss vsync for surface
swaps. Minimal test scenario is constantly resizing a glxgears
Xwayland window.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-3-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Apparently nobody can figure out where the old logic came from, but it
seems like it has never been actually used on any supported firmware to
this day. OSLog buffers were apparently never requested.
But starting with 13.3, we actually need this implemented properly for
MTP (and later AOP) to work, so let's actually do that.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-2-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
This state is needed to wake the dcp IOP after m1n1 shut it down
and works for all other co-processors as well.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-1-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
PCI devices device tree nodes can be already created. This was introduced
by commit 407d1a5192 ("PCI: Create device tree node for bridge").
In order to have device tree nodes related to PCI devices attached on their
PCI root bus (the PCI bus handled by the PCI host bridge), a PCI root bus
device tree node is needed. This root bus node will be used as the parent
node of the first level devices scanned on the bus. On device tree based
systems, this PCI root bus device tree node is set to the node of the
related PCI host bridge. The PCI host bridge node is available in the
device tree used to describe the hardware passed at boot.
On non device tree based system (such as ACPI), a device tree node for the
PCI host bridge or for the root bus does not exist. Indeed, the PCI host
bridge is not described in a device tree used at boot simply because no
device tree is passed at boot.
The device tree PCI host bridge node creation needs to be done at runtime.
This is done in the same way as for the creation of the PCI device nodes.
I.e. node and properties are created based on computed information done by
the PCI core. Also, as is done on device tree based systems, this PCI host
bridge node is used for the PCI root bus.
With this done, hardware available in a PCI device that doesn't follow the
PCI model consisting in one PCI function handled by one driver can be
described by a device tree overlay loaded by the PCI device driver on non
device tree based systems. Those PCI devices provide a single PCI function
that includes several functionalities that require different drivers. The
device tree overlay describes the internal devices and their relationships.
It allows to load drivers needed by those different devices in order to
have functionalities handled.
Link: https://lore.kernel.org/r/20250224141356.36325-6-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
The res parameter has no reason to be a pointer to an un-const struct
resource. Indeed, struct resource is not supposed to be modified by the
function.
Constify the res parameter.
Link: https://lore.kernel.org/r/20250224141356.36325-5-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
The pdev (pointer to a struct pci_dev) parameter of of_pci_set_address()
cannot be NULL.
In order to use of_pci_set_address() when creating the PCI root bus node,
it needs to support a NULL pdev parameter. Indeed, in the case of the PCI
root bus node creation, no pdev is available and of_pci_set_address() will
be used with the bridge windows.
Allow to call of_pci_set_address() with a NULL pdev.
Link: https://lore.kernel.org/r/20250224141356.36325-4-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
The commit 407d1a5192 ("PCI: Create device tree node for bridge")
creates of_node for PCI devices. The newly created of_node is attached
to an existing device. This is done setting directly pdev->dev.of_node
in the code.
Even if pdev->dev.of_node cannot be previously set, this doesn't handle
the fwnode field of the struct device. Indeed, this field needs to be
set if it hasn't already been set.
device_{add,remove}_of_node() have been introduced to handle this case.
Use them instead of the direct setting.
Link: https://lore.kernel.org/r/20250224141356.36325-3-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
An of_node can be set to a device using device_set_node(), which does not
prevent any of_node and/or fwnode overwrites.
When adding an of_node on an already present device, the following
operations need to be done:
- Attach the of_node only if no of_node is already attached
- Attach the of_node as a fwnode if no fwnode were already attached
This is the purpose of device_add_of_node(). device_remove_of_node()
reverts the operations done by device_add_of_node().
Link: https://lore.kernel.org/r/20250224141356.36325-2-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Intel idle driver is preferred over the ACPI processor idle driver,
but fails to implement the work around for Core2 generation CPUs, where
the TSC stops in C2 and deeper C-states. This causes stalls and boot
delays, when the clocksource watchdog does not catch the unstable TSC
before the CPU goes deep idle for the first time.
The ACPI driver marks the TSC unstable when it detects that the CPU
supports C2 or deeper and the CPU does not have a non-stop TSC.
Add the equivivalent work around to the Intel idle driver to cure that.
Fixes: 18734958e9 ("intel_idle: Use ACPI _CST for processor models without C-state tables")
Reported-by: Fab Stz <fabstz-it@yahoo.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Fab Stz <fabstz-it@yahoo.fr>
Cc: All applicable <stable@vger.kernel.org>
Closes: https://lore.kernel.org/all/10cf96aa-1276-4bd4-8966-c890377030c3@yahoo.fr
Link: https://patch.msgid.link/87bjupfy7f.ffs@tglx
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In certain cases, hardware might provide packets with a
length greater than the maximum native Wi-Fi header length.
This can lead to accessing and modifying fields in the header
within the ath12k_dp_rx_h_undecap_nwifi function for
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and
potentially resulting in invalid data access and memory corruption.
Add a sanity check before processing the SKB to prevent invalid
data access in the undecap native Wi-Fi function for the
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manish Dharanenthiran <quic_mdharane@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20250211090302.4105141-1-tamizh.raja@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently Tx completion for few exception packets are received from
firmware and the tx status updated to mac80211. The tx status values of
HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP and HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL
are considered as tx failure and reported as tx failure to mac80211.
But these failure status is due to internal firmware tx drop and these
packets were not tried to transmit in the air.
In case of mesh this invalid tx status report might trigger mpath broken
issue due to increase in mpath fail average.
So do not report these tx status as tx failure instead free the skb
by calling ieee80211_free_txskb(), and that will be accounted as dropped
frame.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241122173432.2064858-1-quic_tamizhr@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add support for calibration-like properties without 'ath11k' prefix,
while still keeping everything backwards compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250225-b-wifi-qcom-calibration-variant-v1-5-3b2aa3f89c53@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add support for calibration-like properties without 'ath10k' prefix,
while still keeping everything backwards compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250225-b-wifi-qcom-calibration-variant-v1-4-3b2aa3f89c53@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Devicetree properties describing exactly the same thing should be
reusable between device bindings. All Qualcomm Atheros WiFi chips needs
certain calibration data, so properties should not be prefixed with
device family (ath12k).
Deprecate qcom,ath12k-calibration-variant and alike, so we gradually
switch to a common property. This will also allow moving these
properties to common schema, if desired.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250225-b-wifi-qcom-calibration-variant-v1-3-3b2aa3f89c53@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Devicetree properties describing exactly the same thing should be
reusable between device bindings. All Qualcomm Atheros WiFi chips needs
certain calibration data, so properties should not be prefixed with
device family (ath11k).
Deprecate qcom,ath11k-calibration-variant and alike, so we gradually
switch to a common property. This will also allow moving these
properties to common schema, if desired.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250225-b-wifi-qcom-calibration-variant-v1-2-3b2aa3f89c53@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Devicetree properties describing exactly the same thing should be
reusable between device bindings. All Qualcomm Atheros WiFi chips needs
certain calibration data, so properties should not be prefixed with
device family (ath10k).
Deprecate qcom,ath10k-calibration-variant and alike, so we gradually
switch to a common property. This will also allow moving these
properties to common schema, if desired.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250225-b-wifi-qcom-calibration-variant-v1-1-3b2aa3f89c53@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Function ath12k_mac_setup_bcn_tmpl_ema() retrieves 'bss_conf'
only to get BSSID index which is an overhead because the
caller ath12k_mac_setup_bcn_tmpl() has already stored this
locally. Pass the index as an input instead.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250210182718.408891-6-aloka.dixit@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add new input parameter to ath12k_mac_setup_bcn_tmpl_ema() for
'tx_arvif' as the caller ath12k_mac_setup_bcn_tmpl() already
stores it locally. Avoid duplicate retrieval.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250210182718.408891-5-aloka.dixit@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Create a new function ath12k_mac_get_tx_arvif() to retrieve 'arvif'
for the transmitted interface of the MBSSID set. This clean up will
help modifying the same code path for MLO changes.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250210182718.408891-4-aloka.dixit@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Function ath11k_mac_setup_bcn_tmpl() retrieves tx_arvif only for
a sanity check and then calls ath11k_mac_setup_bcn_tmpl_mbssid()
or ath11k_mac_setup_bcn_tmpl_ema() both of which again retrieve
the same pointer. Instead store the pointer and pass it to the
latter two functions. Compile tested only.
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250210182718.408891-3-aloka.dixit@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Create a new function ath11k_mac_get_tx_arvif() to retrieve 'arvif'
for the transmitted interface of the MBSSID set. This will help
modifying the same code path to reflect mac80211 data structure
changes to support MLO. This also fixes an issue in
ath11k_mac_update_vif_chan() where tx_arvif is not reset to NULL
inside for loop during each iteration. Compile tested only.
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250210182718.408891-2-aloka.dixit@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In preparation for memtostr*() checking that its source is marked as
nonstring, annotate the device strings accordingly using the new UAPI
alias for the "nonstring" attribute.
Signed-off-by: Kees Cook <kees@kernel.org>
In order to annotate byte arrays in UAPI that are not C strings (i.e.
they may not be NUL terminated), the "nonstring" attribute is needed.
However, we can't expose this to userspace as it is compiler version
specific.
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for strtomem*() checking that its destination is a
nonstring, rename and annotate message.bytes accordingly.
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for strtomem*() checking that its destination is a
__nonstring, annotate "nonstring" and "nonstring_small" variables
accordingly.
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for memtostr*() checking that its source is marked as
nonstring, annotate the device strings accordingly.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for memtostr*() checking that its source is marked as
nonstring, annotate the device strings accordingly.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for memtostr*() checking that its source is marked as
nonstring, annotate the device strings accordingly.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
