When giving up on making a high-confidence prediction,
get_typical_interval() always returns UINT_MAX which means that the
next idle interval prediction will be based entirely on the time till
the next timer. However, the information represented by the most
recent intervals may not be completely useless in those cases.
Namely, the largest recent idle interval is an upper bound on the
recently observed idle duration, so it is reasonable to assume that
the next idle duration is unlikely to exceed it. Moreover, this is
still true after eliminating the suspected outliers if the sample
set still under consideration is at least as large as 50% of the
maximum sample set size.
Accordingly, make get_typical_interval() return the current maximum
recent interval value in that case instead of UINT_MAX.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/7770672.EvYhyI6sBW@rjwysocki.net
Currently, get_typical_interval() attempts to eliminate outliers at the
high end of the sample set only (probably in order to bias the prediction
toward lower values), but this it problematic because if the outliers are
present at the low end of the sample set, discarding the highest values
will not help to reduce the variance.
Since the presence of outliers at the low end of the sample set is
generally as likely as their presence at the high end of the sample
set, modify get_typical_interval() to treat samples at the largest
distances from the average (on both ends of the sample set) as outliers.
This should increase the likelihood of making a meaningful prediction
in some cases.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/2301940.iZASKD2KPV@rjwysocki.net
To prepare get_typical_interval() for subsequent changes, rearrange
the use of the data point threshold in it a bit and initialize that
threshold to UINT_MAX which is more consistent with its data type.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/8490144.T7Z3S40VBb@rjwysocki.net
Use the observation that one loop is sufficient to compute the average
of an array of values and their variance to eliminate one of the loops
from get_typical_interval().
While at it, make get_typical_interval() consistently use u64 as the
64-bit unsigned integer data type and rearrange some white space and the
declarations of local variables in it (to make them follow the reverse
X-mas tree pattern).
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/3339073.aeNJFYEL58@rjwysocki.net
Local variable min in get_typical_interval() is updated, but never
accessed later, so drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/13699686.uLZWGnKmhe@rjwysocki.net
size_t needs a %z format string modifier instead of %l
samples/vfs/test-list-all-mounts.c:152:39: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
152 | printf("mnt_uidmap[%lu]:\t%s\n", idx, idmap);
| ~~~ ^~~
| %zu
samples/vfs/test-list-all-mounts.c:161:39: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
161 | printf("mnt_gidmap[%lu]:\t%s\n", idx, idmap);
| ~~~ ^~~
| %zu
Fixes: fa204a65f1 ("samples/vfs: add STATMOUNT_MNT_{G,U}IDMAP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250224141406.1400864-1-arnd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Combine 'else' and 'if' conditional statements onto a single line and drop
unrequired braces, as is standard coding style.
The code had been like this since commit c3b0e880bb ("iomap: support
REQ_OP_ZONE_APPEND").
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224154538.548028-1-john.g.garry@oracle.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The visl driver supports both frame and slice mode, with and without a
start-code. But, the range and default for these enum controls was not
set, which currently limits the decoder to enums with a value of 0. Fix
this by setting the decoder mode and start code controls for both the
H.264 and HEVC codecs.
Fixes: 0c078e310b ("media: visl: add virtual stateless decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This is merge of shared branch between RDMA and net-next trees.
* mlx5-next: (550 commits)
net/mlx5: Change POOL_NEXT_SIZE define value and make it global
net/mlx5: Add new health syndrome error and crr bit offset
Linux 6.14-rc3
...
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The display related IPs in MT8188 are flexible and support being
interconnected with different instances of DDP IPs and/or with
different DDP IPs, forming a full Display Data Path that ends
with an actual display output, which is board specific.
Add a common graph in the main mt8188.dtsi devicetree, which is
shared between all of the currently supported boards.
All boards featuring any display functionality will extend this
common graph to hook the display controller of the SoC to their
specific output port(s).
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # On MT8188 Ciri (int. and ext.)
Link: https://lore.kernel.org/r/20250220110948.45596-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This board features multiple USB connectors:
* One Type-C connector with Power Delivery and Alt. Modes;
* One MicroUSB connector, also used for bootloader SW download;
* One USB through the RaspberryPi-compatible pins header.
Add configuration for the MTU3 controllers providing OTG support
with role switching both on the MicroUSB port, RPi pins header,
and the Type-C port found on this board.
Moreover, add the Richtek RT1715 Type-C Power Delivery Controller
which manages current source/sink, linked to the iTE IT5205 Type-C
Alternate Mode Passive Mux, handling both mode switching between
USB (up to 3.1 Gen2 10Gbps) and DisplayPort (four lanes, DP1.4,
op to 8.1Gbps) and plug orientation switching.
All USB ports reside on different controller instances, and all of
them support host or gadget and can be configured as desired at
runtime.
Link: https://lore.kernel.org/r/20250220105514.43107-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MT8188 SoC has three USB controllers, and all of them are behind
the MTU3 DRD controller.
Add the missing MTU3 nodes, default disabled, for all USB controllers
and move the related XHCI nodes to be children of their MTU3 DRD to
correctly describe the SoC.
In order to retain USB functionality on all of the MT8188 and MT8390
boards, also move the vusb33 supply and enable the relevant MTU3 nodes
with special attention to the MT8188 Geralt Chromebooks, where it was
necessary to set the dr_mode of all MTU3 controllers to host to avoid
interfering with the EC performing DRD on its own.
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # on MT8188 Ciri
Link: https://lore.kernel.org/r/20250220105514.43107-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a port used to connect the SuperSpeed output endpoint to a
Type-C connector.
Note that the MediaTek XHCI controllers are always in front of a
different controller handling the USB HS (usually, MTU3), so the
only port that this controller provides is SuperSpeed, while the
HighSpeed one comes from elsewhere.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250220105514.43107-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable USB Type-C support on MediaTek MT8395 Genio 1200 EVK by adding
configuration for TCPC Port, USB-C connector, MUX IT5205 and related
settings.
Configure dual role switch capability, set up PD (Power Delivery) profiles,
and establish endpoints for SS (SuperSpeed) and HS (HighSpeed) USB.
Update pinctrl configurations for U3 P0 VBus default pins and set dr_mode
to "otg" for OTG (On-The-Go) mode operation.
Add ITE IT5205 (TYPEC MUX) under I2C2 bus and configure its properties;
also add references and configurations to 'typec-mux' node.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Yow-Shin Liou <yow-shin.liou@mediatek.com>
Signed-off-by: Simon Sun <simon.sun@yunjingtech.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20250224114934.3583191-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Define the ports property in the mediatek,mtu3 device tree binding schema.
Include definitions for port@0 and port@1, specifying their roles as
High Speed (HS) and Super Speed (SS) data buses, respectively.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20250220142230.2530583-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
usb_p2_vbus regulator has the same regulator-name property value as
sdio_fixed_3v3, so change it to avoid this.
Fixes: a4fd1943bf ("arm64: dts: mediatek: mt8390-genio-700-evk: update regulator names")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250221-fix-mtk8390-genio-common-dup-regulator-name-v1-1-92f7b9f7a414@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
After commit 2be404486c ("HID: i2c-hid-of: Add reset GPIO support to
i2c-hid-of"), the i2c-hid-of driver used by some mt8183 devices resets
the touchscreen without having enough post-reset delay. This makes those
touchscreen fail to get probed.
Switch to Elan touchscreen driver, which has enough post-reset delay.
Fixes: 2be404486c ("HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Leon Romanovsky says:
====================
This series refactors the xdo_dev_offload_ok() to be global place for
drivers to check if their offload can perform encryption for xmit
packets.
Such common place gives us an option to check MTU and PMTU at one place.
====================
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When we obtain a reference to of a platform_device, we need to release
it via put_device.
Found by cocci:
./platform/nuvoton/npcm-video.c:1677:3-9: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
./platform/nuvoton/npcm-video.c:1684:3-9: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
./platform/nuvoton/npcm-video.c:1690:3-9: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
./platform/nuvoton/npcm-video.c:1694:1-7: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
Instead of manually calling put_device, use the __free macros.
Cc: stable@vger.kernel.org
Fixes: 46c15a4ff1 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Make sure all the code paths call of_node_put().
Instead of manually calling of_node_put, use the __free macros/helpers.
Cc: stable@vger.kernel.org
Fixes: 46c15a4ff1 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The register that enables selecting a test-pattern to be outputted in
free-run mode (FREE_RUN_PAT_SEL[2:0]) is only available on adv7280 based
devices, not the adv7180 based ones.
Add a flag to mark devices that are capable of generating test-patterns,
and those that are not. And only register the control on supported
devices.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The reason why this passed unnoticed is that most infotainment systems
use frequencies near enough the middle (50MHz) where both sets work.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The CMT "magic values" registers must be updated while the CMT reset
registers are active.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
netup_eeprom_write() was added in 2009 by
commit b45c0551f9 ("V4L/DVB (10797): Add EEPROM code for NetUP Dual
DVB-S2 CI card.")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The variable enable is being assigned a value that is never read
afterwards. The assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In tc358746_link_validate() an attempt is made to get the state lock of the
subdev, but since this is already held by the calling function
v4l2_subdev_link_validate(), this leads to a deadlock.
Another problem is that this function queries the link frequency of the
source device. Since some image sensors use the lock of the v4l2 control
handler as a state lock, which is already held at this point, a deadlock
can also occur here.
Move the calculation of the FIFO size from tc358746_link_validate() to
tc358746_apply_misc_config() to avoid the deadlocks mentioned.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When calculating D-PHY registers, using data rates that are not multiples
of 16 can lead to precision loss in division operations. This can result in
register values that produce timing violations against the MIPI standard.
An example:
cfg->hs_clk_rate = 294MHz
hf_clk = 18
If the desired value in cfg->init is 100us, which is the minimum allowed
value, then the LINEINITCNT register is calculated as 1799. But since the
actual clock is 18.375MHz instead of 18MHz, this setting results in a time
that is shorter than 100us and thus violates the standard. The correct
value for LINEINITCNT would be 1837.
Improve the precision of calculations by using Hz instead of MHz as unit.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The TC358746 supports RAW formats with 8, 10, 12, and 14-bit depths. Since
pixel data is transported transparently without modifying the pixel
arrangement, all Bayer patterns (RGGB, BGGR, GRBG, GBRG) are supported.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into drm-next
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next
can base on rc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
As per dt-bindings the property is called vddio-supply, so use the
correct name in the driver instead of iovdd. The datasheet also calls
the supply 'VDDIO'.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-2-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the statement above AVDD gets enabled, and not IOVDD, so fix this
copy-paste mistake.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Reported-by: Jens Reidel <adrian@travitia.xyz>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-1-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Matthieu Baerts says:
====================
mptcp: pm: misc cleanups, part 3
These cleanups lead the way to the unification of the path-manager
interfaces, and allow future extensions. The following patches are not
all linked to each others, but are all related to the path-managers,
except the last three.
- Patch 1: remove unused returned value in mptcp_nl_set_flags().
- Patch 2: new flag: avoid iterating over all connections if not needed.
- Patch 3: add a build check making sure there is enough space in cb-ctx.
- Patch 4: new mptcp_pm_genl_fill_addr helper to reduce duplicated code.
- Patch 5: simplify userspace_pm_append_new_local_addr helper.
- Patch 6: drop unneeded inet6_sk().
- Patch 7: use ipv6_addr_equal() instead of !ipv6_addr_cmp()
- Patch 8: scheduler: split an interface in two.
- Patch 9: scheduler: save 64 bytes of currently unused data.
- Patch 10: small optimisation to exit early in case of retransmissions.
====================
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-0-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A small cleanup, reordering the conditions to avoid checking things
twice.
The code here is called in case of timeout on a TCP connection, before
triggering a retransmission. But it only acts on SYN + MPC packets.
So the conditions can be re-order to exit early in case of non-MPTCP
SYN + MPC. This also reduce the indentation levels.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-10-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thanks for the previous commit ("mptcp: sched: split get_subflow
interface into two"), the mptcp_sched_data structure is now currently
unused.
This structure has been added to allow future extensions that are not
ready yet. At the end, this structure will not even be used at all when
mptcp_subflow bpf_iter will be supported [1].
Here is a first step to save 64 bytes on the stack for each scheduling
operation. The structure is not removed yet not to break the WIP work on
these extensions, but will be done when [1] will be ready and applied.
Link: https://lore.kernel.org/6645ad6e-8874-44c5-8730-854c30673218@linux.dev [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-9-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
get_retrans() interface of the burst packet scheduler invokes a sleeping
function mptcp_pm_subflow_chk_stale(), which calls __lock_sock_fast().
So get_retrans() interface should be set with BPF_F_SLEEPABLE flag in
BPF. But get_send() interface of this scheduler can't be set with
BPF_F_SLEEPABLE flag since it's invoked in ack_update_msk() under mptcp
data lock.
So this patch has to split get_subflow() interface of packet scheduer into
two interfaces: get_send() and get_retrans(). Then we can set get_retrans()
interface alone with BPF_F_SLEEPABLE flag.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-8-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ipv6_addr_equal() to check whether two IPv6 addresses are equal in
mptcp_addresses_equal().
This is more appropriate than using !ipv6_addr_cmp().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-7-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mptcp_event_add_subflow(), mptcp_event_pm_listener() and
mptcp_nl_find_ssk(), 'issk' has already been got through inet_sk().
No need to use inet6_sk() to get 'ipv6_pinfo' again, just use
issk->pinet6 instead. This patch also drops these 'ipv6_pinfo'
variables.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-6-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable 'match' in mptcp_userspace_pm_append_new_local_addr() is a
redundant one, and this patch drops it.
No need to define 'match' as 'struct mptcp_pm_addr_entry *' type. In this
function, it's only used to check whether it's NULL. It can be defined as
a Boolean one.
Also other variables 'addr_match' and 'id_match' make 'match' a redundant
one, which can be replaced by directly checking 'addr_match && id_match'.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-5-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To save some redundant code in dump_addr() interfaces of both the
netlink PM and userspace PM, the code that calls netlink message
helpers (genlmsg_put/cancel/end) and mptcp_nl_fill_addr() is wrapped
into a new helper mptcp_pm_genl_fill_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-4-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a build check for mptcp_userspace_pm_dump_addr() to make
sure there is enough space in 'cb->ctx' to store an address id bitmap.
Just in case info stored in 'cb->ctx' are increased later.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-3-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an endpoint doesn't have the 'subflow' flag -- in fact, has no type,
so not 'subflow', 'signal', nor 'implicit' -- there are then no subflows
created from this local endpoint to at least the initial destination
address. In this case, no need to call mptcp_pm_nl_fullmesh() which is
there to recreate the subflows to reflect the new value of the fullmesh
attribute.
Similarly, there is then no need to iterate over all connections to do
nothing, if only the 'fullmesh' flag has been changed, and the endpoint
doesn't have the 'subflow' one. So stop early when dealing with this
specific case.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-2-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
