Add new error value for trust lockdown in health syndrome enum.
Also, include the offset for crr bit in the health buffer layout.
These changes prepare for downstream patches that update health
event handling.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219085808.349923-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When there is a failure during bind QP, the cleanup flow destroys the
counter regardless if it is the one that created it or not, which is
problematic since if it isn't the one that created it, that counter could
still be in use.
Fix that by destroying the counter only if it was created during this call.
Fixes: 45842fc627 ("IB/mlx5: Support statistic q counter configuration")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://patch.msgid.link/25dfefddb0ebefa668c32e06a94d84e3216257cf.1740033937.git.leon@kernel.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The simple-audio-card's microphone widget currently connects to the
headphone jack. Routing the microphone input to the microphone jack
allows for independent operation of the microphone and headphones.
This resolves the following boot-time kernel log message, which
indicated a conflict when the microphone and headphone functions were
not separated:
debugfs: File 'Headphone Jack' in directory 'dapm' already present!
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The simple-audio-card's microphone widget currently connects to the
headphone jack. Routing the microphone input to the microphone jack
allows for independent operation of the microphone and headphones.
This resolves the following boot-time kernel log message, which
indicated a conflict when the microphone and headphone functions were
not separated:
debugfs: File 'Headphone Jack' in directory 'dapm' already present!
Fixes: 8749589168 ("arm64: dts: freescale: verdin-imx8mp: dahlia: add sound card")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Unregister the cpufreq device and soc device when resource unwinding,
otherwise there will be warning when do removing test:
sysfs: cannot create duplicate filename '/devices/platform/imx-cpufreq-dt'
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.13.0-rc1-next-20241204
Hardware name: NXP i.MX8MPlus EVK board (DT)
Fixes: 9cc832d377 ("soc: imx8m: Probe the SoC driver as platform driver")
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to leds-gpio.yaml, the LED nodes should not contain
unit addresses. Remove them.
Also, 'default-trigger' is not a valid property. Change it to
'linux,default-trigger'.
These changes fix the following dt-schema warnings:
led@1: Unevaluated properties are not allowed ('reg' was unexpected)
led@2: Unevaluated properties are not allowed ('reg' was unexpected)
led@3: Unevaluated properties are not allowed ('default-trigger', 'reg' were unexpected)
leds: '#address-cells', '#size-cells' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently, the compatible string used for the spidev device is "lwn,bk4",
which is the same as the board compatible string documented at fsl.yaml.
This causes several dt-schema warnings:
make dtbs_check DT_SCHEMA_FILES=fsl.yaml
...
['lwn,bk4'] is too short
'lwn,bk4' is not one of ['tq,imx8dxp-tqma8xdp-mba8xx']
'lwn,bk4' is not one of ['tq,imx8qxp-tqma8xqp-mba8xx']
'lwn,bk4' is not one of ['armadeus,imx1-apf9328', 'fsl,imx1ads']
Use a more specific "lwn,bk4-spi" compatible string to fix the problem.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
RK3588 Tiger routes I2C2 signals to the Q7 Camera FFC connector (P2) but
nothing on the SoM itself is on that bus, therefore it'll be up to the
adapter connected to the Q7 Camera FFC connector (P2) to enable the I2C2
controller, if need be.
Thus, disable it by default.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-9-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PX30 Ringneck only exposes I2C3 as LVDS_BLC_CLK/DAT on Q7 golden fingers
but nothing is on that bus on the SoM itself. Therefore, let's enable
the I2C3 bus where it makes sense, in the Haikou carrierboard DTS.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-8-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The signals are exposed on Q7 golden fingers but it's not a given that
the carrierboard will have an Ethernet jack. So let's move the enabling
of the Ethernet controller to the carrierboard DTS instead.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-7-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Haikou carrierboard has an EEPROM on LVDS_BLC_CLK/DAT which are
signals that can carry either I2C or be used as HPD for eDP0/1.
Only eDP0 is routed from RK3399 Puma SoM but only exposed on Haikou
through the Video Connector, a fake PCIe connector. So to be able to use
eDP one would need to use a Device Tree overlay. Therefore, let's
default to having an EEPROM in Haikou carrierboard DTS.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-6-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
I2S0 is routed to the Q7 golden fingers and, on Haikou carrierboard, to
an I2S codec. Nothing aside from signal routing is done on the SoM,
therefore it's the duty of the carrierboard to enable I2S0 whenever an
I2S codec is present.
Such is the case of the Haikou carrierboard, therefore let's migrate the
enabling of this controller to the carrierboard DTS instead of the SoM
DTSI.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-5-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The bus is only exposed on Q7 Camera FFC connector which accepts
external adapters such as Q7 Camera Demo.
The enabling of I2C6 should therefore be done in the adapter Device Tree
Overlay and not in the SoM DTSI, so let's disable it by default.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-4-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
I2C6 is not exposed on Q7 golden fingers which is for routing signals to
the carrierboard but on Q7 Camera connector, for routing signals to an
additional adapter (e.g. Q7 Camera Demo adapter).
Therefore, let's move the modification of I2C6 bus to Puma DTSI.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-3-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The DDC bus is necessarily on I2C3, that's how it's exposed by RK3399
Puma on the Q7 golden fingers, so let's move it to the SoM DTSI instead.
If the carrierboard doesn't route it for some reason, /delete-property/
can be used to remove it.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-2-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In its default configuration (SW2 on "UART1"), UART5 is exposed on the
DB9 RS232/RS485 connector. While the same signals are also exposed on
Q7_GPIO5 and Q7_GPIO6, a GPIO header, and thus could be used for other
purposes, RK3399 Puma Haikou and PX30 Ringneck Haikou do enable the UART
controller exposed on the DB9 connector, so let's keep consistency
across our modules and enable it on RK3588 Tiger Haikou by default too.
Add a comment while at it to explicit where this controller is routed
to.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-1-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK 4D board is based on the Rockchip rk3576 SoC.
The device tree adds support for basic devices:
- UART
- SD Card
- Ethernet
- USB
- RTC
It has 4 USB ports but only 3 are usable as the top left one is used
for maskrom.
It has a USB-C port that is only used for powering the board.
Signed-off-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20250218160714.140709-3-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds the otp node to the rk3576 soc devicetree including the
individual fields we know about.
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250210224510.1194963-7-heiko@sntech.de
This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01
(https://embedded.cherry.de/product/development-kit/) for the Haikou
devkit with RK3399 Puma SoM.
The Video Demo adapter is an adapter connected to the fake PCIe slot
labeled "Video Connector" on the Haikou devkit.
Its main feature is a Leadtek DSI-display with touchscreen and a camera
(that is not supported yet because the expected clock rate by the driver
cannot be exactly reached by the clock driver). To drive these
components a number of additional regulators are grouped on the adapter
as well as a PCA9670 gpio-expander to provide the needed additional
gpio-lines.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-5-310c0b9a3909@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01
(https://embedded.cherry.de/product/development-kit/) for the Haikou
devkit with PX30 Ringneck SoM.
The Video Demo adapter is an adapter connected to the fake PCIe slot
labeled "Video Connector" on the Haikou devkit.
Itss main feature is a Leadtek DSI-display with touchscreen and a camera
(that is not supported yet because the expected clock rate by the driver
cannot be exactly reached by the clock driver). To drive these
components a number of additional regulators are grouped on the adapter
as well as a PCA9670 gpio-expander to provide the needed additional
gpio-lines.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-4-310c0b9a3909@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The HAIKOU-LVDS-9904379 adapter is an adapter for PX30 Ringneck with the
Haikou carrierboard. It is to be inserted in the fake PCIe slot labelled
Video Connector.
This adapter expects an Admatec 9904379 1024x600 LVDS display with
backlight and touchscreen. An EEPROM is also found on the adapter.
This adds support for this adapter on PX30 Ringneck when inserted in
Haikou carrierboard.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-3-310c0b9a3909@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Fix AVX-VNNI CPU feature dependency bug triggered via
the 'noxsave' boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=CR8P
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix AVX-VNNI CPU feature dependency bug triggered via the 'noxsave'
boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
* tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs: arch/x86/sva: Fix two grammar errors under Background and FAQ
x86/cpufeatures: Make AVX-VNNI depend on AVX
MAINTAINERS: Change maintainer for RDT
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads.
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y. (This debug option is disabled on most
distributions.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=CuyA
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq fixes from Ingo Molnar:
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y (This debug option is disabled on most
distributions)
* tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix rseq registration with CONFIG_DEBUG_RSEQ
sched: Compact RSEQ concurrency IDs with reduced threads and affinity
- Fix inline asm constraint in cmma_test_essa() to avoid potential ESSA
detection miscompilation
- Fix build failure with CONFIG_GENDWARFKSYMS by disabling purgatory
symbol exports with -D__DISABLE_EXPORTS
- Update defconfigs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAme5DtQACgkQjYWKoQLX
FBidIgf/SVOEoOSCeHHt1M2PXuml55iKpkB6usA7ArVRBfVs2H8FVcI5/b/geQV/
HAa/4BL0dgVtPLse8BAucB+FRYUdWveAAkDcknmxlwYPDvKGCnpXipcQkpPFicIW
gGoLXvh1Rq7gwfhqm1XGSPipvpTHf7JstDpHa+BbUtOElzOFl8XZL8UMqf91GXMn
XEllxtJgUBqHVd//TP99KAgUbaPbLpPxKMX72cuSusAfOyiroG/ft/PwfbQU0BSl
LMZpUpRyDE76lSsAEyc8YAuCMmt0ubY+aYFfO9mvA11bAFTskcaQO2PAq8fhUY4/
Mg604S8m2G44hoW+xKcvX8xN/PWuuA==
=iTtS
-----END PGP SIGNATURE-----
Merge tag 's390-6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix inline asm constraint in cmma_test_essa() to avoid potential ESSA
detection miscompilation
- Fix build failure with CONFIG_GENDWARFKSYMS by disabling purgatory
symbol exports with -D__DISABLE_EXPORTS
- Update defconfigs
* tag 's390-6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix ESSA detection
s390/purgatory: Use -D__DISABLE_EXPORTS
s390: Update defconfigs
Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to ftrace.
The manager ops does not have any callback but calls the sub-ops
callbacks. The manage ops hashes (what is used to tell ftrace what
functions to attach to) is built on the sub-ops it manages.
There was an error in the way it built the hash. An empty hash means to
attach to all functions. When the manager ops had one sub-ops it properly
copied its hash. But when the manager ops had more than one sub-ops, it
went into a loop to make a set of all functions it needed to add to the
hash. If any of the subops hashes was empty, that would mean to attach
to all functions. The error was that the first iteration of the loop
passed in an empty hash to start with in order to add the other hashes.
That starting hash was mistaken as to attach to all functions. This made
the manage ops attach to all functions whenever it had two or more
sub-ops, even if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for that
function will be added to the manager ops for each subops. This causes
waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is attached
to. It also has a counter of how many fprobes are attached. When the last
fprobe is removed, it unregisters the fprobe from ftrace but does not
remove the functions the last fprobe was attached to from the hash. This
leaves the old functions attached. When a new fprobe is added, the fprobe
infrastructure attaches to not only the functions of the new fprobe, but
also to the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes from
zero to one, it attaches its ops to ftrace. When an fprobe is removed, the
counter is decremented. If the counter goes from 1 to zero, it removes the
fprobes ops from ftrace. There was an issue where if two fprobes trace the
same function, the addition of each fprobe would increment the counter.
But when removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not remove
the functions from the ftrace ops. But it also did not decrement the
counter. When the last fprobe is removed, the counter is still one. This
leaves the fprobes callback still registered with ftrace and it being
called by the functions defined by the fprobes ops hash. Worse yet,
because all the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions. Thus, this puts the
state of the system where every function is calling the fprobe callback
handler (which does nothing as there are no registered fprobes), but this
causes a good 13% slow down of the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which added
another layer of preempt disable. As the preempt_count gets traced in the
event, it needs to subtract the amount of preempt disabling the tracer
does to record what the preempt_count was when the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that is
set by the return of the next() function. The start() function allocates
it and the stop() function frees it. But when the last item is found, the
next() returns NULL which leaks the data that was allocated in start().
The m->private is used for something else, so have next() free the data
when it returns NULL, as stop() will then just receive NULL in that case.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ7j6ARQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quFxAQDrO8tjYbhLqg/LMOQyzwn/EF3Jx9ub
87961mA0rKTkYwEAhPNzTZ6GwKyKc4ny/R338KgNY69wWnOK6k/BTxCRmwk=
=TOah
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
Rename the I/O accessors provided by `Io` to encode the type as
number instead of letter. This is in preparation for Port I/O support
to use a trait for generic accessors.
Add a `c_fn` argument to the accessor generation macro to translate
between rust and C names.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/PIO.20support/near/499460541
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250217-io-generic-rename-v1-1-06d97a9e3179@kloenk.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the required clock and reset which is used for the LCD TCON. Please
note that these clocks are exposed on the T507, H616, and H700; however
the H616 does not expose an LCD controller for which these clocks are
needed.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://patch.msgid.link/20250213172248.158447-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the required clock and reset bindings for the LCD TCON.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250213172248.158447-2-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add an Operating Performance Points table for the CPU cores to
enable Dynamic Voltage & Frequency Scaling on the A100.
Signed-off-by: Shuosheng Huang <huangshuosheng@allwinnertech.com>
[masterr3c0rd@epochal.quest: fix typos in -cpu-opp, use compatible]
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241031070232.1793078-14-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
This test adds coverage of expected errors during rseq registration and
unregistration, it disables glibc integration and will thus always
exercise the rseq syscall explictly.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250121213402.1754762-1-mjeanson@efficios.com
Add the property of x-powers,no-thermistor for the battery of the
Anbernic RG35XX series of H700 devices.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250204155835.161973-5-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The RG35XX-H has a USB host port in addition to the USB OTG port used
for charging. The host port receives its power from two distinct GPIO
controlled regulators.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20241018160617.157083-5-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the second LED (red) to the Anbernic RG35XX series. The RG35XX has
3 LEDs: an orange one that is controlled directly by the PMIC; and a
green and red one that are controlled by GPIOs.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20241018160617.157083-4-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Set the cpusldo regulator for the AXP717 to "regulator-always-on". Its
current functionality is still unknown as there are no schematics
available, however it was observed that upon reboot if this regulator
was disabled GPIO detection logic in the bootloader was inconsistent.
Keep the regulator powered on for now until it can be defined
correctly.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20241018160617.157083-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Avoid unnecessary per-CPU memory allocation on unsupported CPUs,
this can save 12K memory for each CPU
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250122074103.3091-1-lirongqing@baidu.com
Some devices may have more than 16 bits of status. This patch allows the
user to specify the size of the DIAG_STAT register. It defaults to 2 if
not specified. This is mainly for backward compatibility.
Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
Link: https://patch.msgid.link/20250217105753.605465-4-robert.budai@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch allows the custom definition of reset functionality for adis object.
It is useful in cases where the driver does not need to sleep after the reset
since it is handled by the library.
Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
Link: https://patch.msgid.link/20250217105753.605465-3-robert.budai@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch introduces a custom ops struct letting users define custom read and
write functions. Some adis devices might define a completely different spi
protocol from the one used in the default implementation.
Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
Link: https://patch.msgid.link/20250217105753.605465-2-robert.budai@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Recent change in how get_user() handles pointers:
https://lore.kernel.org/all/20241024013214.129639-1-torvalds@linux-foundation.org/
has a specific case for LAM. It assigns a different bitmask that's
later used to check whether a pointer comes from userland in get_user().
Add test case to LAM that utilizes a ioctl (FIOASYNC) syscall which uses
get_user() in its implementation. Execute the syscall with differently
tagged pointers to verify that valid user pointers are passing through
and invalid kernel/non-canonical pointers are not.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/1624d9d1b9502517053a056652d50dc5d26884ac.1737990375.git.maciej.wieczor-retman@intel.com
Until LASS is merged into the kernel:
https://lore.kernel.org/all/20241028160917.1380714-1-alexander.shishkin@linux.intel.com/
LAM is left disabled in the config file. Running the LAM selftest with
disabled LAM only results in unhelpful output.
Use one of LAM syscalls() to determine whether the kernel was compiled
with LAM support (CONFIG_ADDRESS_MASKING) or not. Skip running the tests
in the latter case.
Merge CPUID checking function with the one mentioned above to achieve a
single function that shows LAM's availability from both CPU and the
kernel.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/251d0f45f6a768030115e8d04bc85458910cb0dc.1737990375.git.maciej.wieczor-retman@intel.com
In current form cpu_has_la57() reports platform's support for LA57
through reading the output of cpuid. A much more useful information is
whether 5-level paging is actually enabled on the running system.
Check whether 5-level paging is enabled by trying to map a page in the
high linear address space.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/8b1ca51b13e6d94b5a42b6930d81b692cbb0bcbb.1737990375.git.maciej.wieczor-retman@intel.com
Previously the e820_table_kexec[] was exported to sysfs since kexec-tools uses
the memmap entries to prepare the e820 table for the new kernel.
The following commit, ~8 years ago, introduced e820_table_firmware[] and changed
the behavior to export the firmware table instead:
12df216c61 ("x86/boot/e820: Introduce the bootloader provided e820_table_firmware[] table")
Originally the kexec_file_load and kexec_load syscalls both used e820_table_kexec[].
Since the sysfs exported entries are from e820_table_firmware[] people
now need to tune both tables for kexec.
Restore the old behavior so the kexec_load and kexec_file_load syscalls work with
only one table update. The e820_table_firmware[] is used by hibernation kernel
code and it works without the sysfs exporting. Also remove the SEV
e820_table_firmware[] updating code.
Also update the code comments here and drop the comments about setup_data
reservation since it is not needed any more after this change was made
a year ago:
fc7f27cda8 ("x86/kexec: Do not update E820 kexec table for setup_data")
[ mingo: Tidy up the changelog and comments. ]
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/Z5jcb1GKhLvH8kDc@darkstar.users.ipa.redhat.com
