Despite assigning a temporary variable the value of &pdev->dev early on
in the probe function, the probe function then continues to use this
construct when it could just use the local dev variable instead.
Simplify this by using the local dev variable directly.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The rockchip rng driver does a dance to store the dev pointer in the
hwrng's unsigned long "priv" member. However, since the struct hwrng
member of rk_rng is not a pointer, we can use container_of to get the
struct rk_rng instance from just the struct hwrng*, which means we don't
have to subvert what little there is in C of a type system and can
instead store a pointer to the device struct in the rk_rng itself.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Rockchip RK3588 SoC has two hardware RNGs accessible to the
non-secure world: an RNG in the Crypto IP, and a standalone RNG that is
new to this SoC.
Add a binding for this new standalone RNG. It is distinct hardware from
the existing rockchip,rk3568-rng, and therefore gets its own binding as
the two hardware IPs are unrelated other than both being made by the
same vendor.
The RNG is capable of firing an interrupt when entropy is ready.
The reset is optional, as the hardware does a power-on reset, and
functions without the software manually resetting it.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When TF-A is used to assert/deassert the resets through SCMI, the
IDs communicated to it are different than the ones mainline Linux uses.
Import the list of SCMI reset IDs from mainline TF-A so that devicetrees
can use these IDs more easily.
Co-developed-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The request context virtio_crypto_{akcipher,sym}_request contains a
pointer to the [as]kcipher_request itself.
The pointer is superfluous as it can be calculated with container_of().
Drop the superfluous pointer.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The request context virtio_crypto_{akcipher,sym}_request contains a
pointer to the transform context virtio_crypto_[as]kcipher_ctx.
The pointer is superfluous as it can be calculated with the cheap
crypto_akcipher_reqtfm() + akcipher_tfm_ctx() and
crypto_skcipher_reqtfm() + crypto_skcipher_ctx() combos.
Drop the superfluous pointer.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
struct virtio_crypto_[as]kcipher_ctx contains a backpointer to struct
crypto_[as]kcipher which is superfluous in two ways:
First, it's not used anywhere. Second, the context is embedded into
struct crypto_tfm, so one could just use container_of() to get from the
context to crypto_tfm and from there to crypto_[as]kcipher.
Drop the superfluous backpointer.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When setting a public or private RSA key, the integer n is cached in the
transform context virtio_crypto_akcipher_ctx -- with the sole purpose of
calculating the key size from it in virtio_crypto_rsa_max_size().
It looks like this was copy-pasted from crypto/rsa.c.
Cache the key size directly instead of the integer n, thus simplifying
the code and reducing the memory footprint.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It seems the kernel-doc of virtcrypto_dev_start() was copied verbatim to
virtcrypto_dev_stop(). Fix it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable PMIC and PMIC peripherals for qcs8300-ride board. The qcs8
300-ride uses 2 pmics(pmm8620au:0,pmm8650au:1) on the board, which
are variants of pmm8654au used on sa8775p/qcs9100 -ride(4x pmics).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Link: https://lore.kernel.org/r/20250108-adds-spmi-pmic-peripherals-for-qcs8300-v3-2-ee94642279ff@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce hv_curr_partition_type to store the partition type
as an enum.
Right now this is limited to guest or root partition, but there will
be other kinds in future and the enum is easily extensible.
Set up hv_curr_partition_type early in Hyper-V initialization with
hv_identify_partition_type(). hv_root_partition() just queries this
value, and shouldn't be called before that.
Making this check into a function sets the stage for adding a config
option to gate the compilation of root partition code. In particular,
hv_root_partition() can be stubbed out always be false if root
partition support isn't desired.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com>
Return linux-friendly error codes from hypercall helper functions,
which allows them to be used more flexibly.
Introduce hv_result_to_errno() for this purpose, which also handles
the special value U64_MAX returned from hv_do_hypercall().
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-2-git-send-email-nunodasneves@linux.microsoft.com>
Commit db6fe4d61e ("lib: Move KUnit tests into tests/ subdirectory") adds
a file entry to the non-existing file scripts/test_fortify.sh. Probably,
this entry intends to refer to ./lib/test_fortify/test_fortify.sh, though.
As that file is already covered by the entry lib/test_fortify/*, there is
no need for a separate file entry. So, drop the unnecessary file entry to
the test_fortify script.
Further, this commit misses to adjust the entry referring to
lib/usercopy_kunit.c, which is moved to lib/tests. So, also adjust that
file entry.
Fixes: db6fe4d61e ("lib: Move KUnit tests into tests/ subdirectory")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20250217100643.20182-1-lukas.bulwahn@redhat.com
Signed-off-by: Kees Cook <kees@kernel.org>
Add an implementation for DMTF DSP0283, which defines a MCTP-over-USB
transport. As per that spec, we're restricted to full speed mode,
requiring 512-byte transfers.
Each MCTP-over-USB interface is a peer-to-peer link to a single MCTP
endpoint, so no physical addressing is required (of course, that MCTP
endpoint may then bridge to further MCTP endpoints). Consequently,
interfaces will report with no lladdr data:
# mctp link
dev lo index 1 address 00:00:00:00:00:00 net 1 mtu 65536 up
dev mctpusb0 index 6 address none net 1 mtu 68 up
This is a simple initial implementation, with single rx & tx urbs, and
no multi-packet tx transfers - although we do accept multi-packet rx
from the device.
Includes suggested fixes from Santosh Puranik <spuranik@nvidia.com>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Santosh Puranik <spuranik@nvidia.com>
Link: https://patch.msgid.link/20250221-dev-mctp-usb-v3-2-3353030fe9cc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upcoming changes will add a USB host (and later gadget) driver for the
MCTP-over-USB protocol. Add a header that provides common definitions
for protocol support: the packet header format and a few framing
definitions. Add a define for the MCTP class code, as per
https://usb.org/defined-class-codes.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250221-dev-mctp-usb-v3-1-3353030fe9cc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using L: with more than a bare email address causes getmaintainer.pl
to be unable to parse the entry. Fix this by doing as other entries
that use this email address and convert it to an R: entry.
Link: https://patch.msgid.link/20250221005012.1051897-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement byte queue limits to allow queuing disciplines to account for
packets enqueued in the ring buffer but not yet transmitted. There are a
separate set of transmit functions for AT91 that I haven't touched since
I don't have hardware to test on.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250220164257.96859-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stats calculations involve a RMW to add the stat update to the existing
value. This is currently not protected by any synchronization mechanism,
so data races are possible. Add a spinlock to protect the update. The
reader side could be protected using u64_stats, but we would still need
a spinlock for the update side anyway. And we always do an update
immediately before reading the stats anyway.
Fixes: 89e5785fc8 ("[PATCH] Atmel MACB ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250220162950.95941-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_init_dma_engine() uses dev_err() which leads to errors being
reported as e.g:
dwc-eth-dwmac 2490000.ethernet: Failed to reset the dma
dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
stmmac_init_dma_engine() is only called from stmmac_hw_setup() which
itself uses netdev_err(), and we will have a net_device setup. So,
change the dev_err() to netdev_err() to give consistent error
messages.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tl5y1-004UgG-8X@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7acf8a1e8a ("Replace 2 jiffies with sysctl netdev_budget_usecs
to enable softirq tuning") added a possibility to set
net_hotdata.netdev_budget_usecs, but added no lower bound checking.
Commit a4837980fd ("net: revert default NAPI poll timeout to 2 jiffies")
made the *initial* value HZ-dependent, so the initial value is at least
2 jiffies even for lower HZ values (2 ms for 1000 Hz, 8ms for 250 Hz, 20
ms for 100 Hz).
But a user still can set improper values by a sysctl. Set .extra1
(the lower bound) for net_hotdata.netdev_budget_usecs to the same value
as in the latter commit. That is to 2 jiffies.
Fixes: a4837980fd ("net: revert default NAPI poll timeout to 2 jiffies")
Fixes: 7acf8a1e8a ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning")
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Link: https://patch.msgid.link/20250220110752.137639-1-jirislaby@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current test marks all unexpected return values as failed and sets ret
to 1. If a test is skipped, the entire test also returns 1, incorrectly
indicating failure.
To fix this, add a skipped variable and set ret to 4 if it was previously
0. Otherwise, keep ret set to 1.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250220085326.1512814-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
net: fib_rules: Add DSCP mask support
In some deployments users would like to encode path information into
certain bits of the IPv6 flow label, the UDP source port and the DSCP
field and use this information to route packets accordingly.
Redirecting traffic to a routing table based on specific bits in the
DSCP field is not currently possible. Only exact match is currently
supported by FIB rules.
This patchset extends FIB rules to match on the DSCP field with an
optional mask.
Patches #1-#5 gradually extend FIB rules to match on the DSCP field with
an optional mask.
Patch #6 adds test cases for the new functionality.
iproute2 support can be found here [1].
[1] https://github.com/idosch/iproute2/tree/submit/fib_rule_mask_v1
====================
Link: https://patch.msgid.link/20250220080525.831924-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for FIB rules that match on DSCP with a mask. Test both good
and bad flows and both the input and output paths.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: dscp redirect to table [ OK ]
TEST: rule6 check: dscp no redirect to table [ OK ]
TEST: rule6 del by pref: dscp redirect to table [ OK ]
TEST: rule6 check: iif dscp redirect to table [ OK ]
TEST: rule6 check: iif dscp no redirect to table [ OK ]
TEST: rule6 del by pref: iif dscp redirect to table [ OK ]
TEST: rule6 check: dscp masked redirect to table [ OK ]
TEST: rule6 check: dscp masked no redirect to table [ OK ]
TEST: rule6 del by pref: dscp masked redirect to table [ OK ]
TEST: rule6 check: iif dscp masked redirect to table [ OK ]
TEST: rule6 check: iif dscp masked no redirect to table [ OK ]
TEST: rule6 del by pref: iif dscp masked redirect to table [ OK ]
[...]
Tests passed: 316
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250220080525.831924-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow user space to configure FIB rules that match on DSCP with a mask,
now that support has been added to the IPv4 and IPv6 address families.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250220080525.831924-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend IPv6 FIB rules to match on DSCP using a mask. Unlike IPv4, also
initialize the DSCP mask when a non-zero 'tos' is specified as there is
no difference in matching between 'tos' and 'dscp'. As a side effect,
this makes it possible to match on 'dscp 0', like in IPv4.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250220080525.831924-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend IPv4 FIB rules to match on DSCP using a mask. The mask is only
set in rules that match on DSCP (not TOS) and initialized to cover the
entire DSCP field if the mask attribute is not specified.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250220080525.831924-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an attribute that allows matching on DSCP with a mask. Matching on
DSCP with a mask is needed in deployments where users encode path
information into certain bits of the DSCP field.
Temporarily set the type of the attribute to 'NLA_REJECT' while support
is being added.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250220080525.831924-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 22600596b6 ("ipv4: give an IPv4 dev to blackhole_netdev")
IPv4 neighbors can be constructed on the blackhole net device, but they
are constructed with an output function (neigh_direct_output()) that
simply calls dev_queue_xmit(). The latter will transmit packets via
'skb->dev' which might not be the blackhole net device if dst_dev_put()
switched 'dst->dev' to the blackhole net device while another CPU was
using the dst entry in ip_output(), but after it already initialized
'skb->dev' from 'dst->dev'.
Specifically, the following can happen:
CPU1 CPU2
udp_sendmsg(sk1) udp_sendmsg(sk2)
udp_send_skb() [...]
ip_output()
skb->dev = skb_dst(skb)->dev
dst_dev_put()
dst->dev = blackhole_netdev
ip_finish_output2()
resolves neigh on dst->dev
neigh_output()
neigh_direct_output()
dev_queue_xmit()
This will result in IPv4 packets being sent without an Ethernet header
via a valid net device:
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on enp9s0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
22:07:02.329668 20:00:40:11:18:fb > 45:00:00:44:f4:94, ethertype Unknown
(0x58c6), length 68:
0x0000: 8dda 74ca f1ae ca6c ca6c 0098 969c 0400 ..t....l.l......
0x0010: 0000 4730 3f18 6800 0000 0000 0000 9971 ..G0?.h........q
0x0020: c4c9 9055 a157 0a70 9ead bf83 38ca ab38 ...U.W.p....8..8
0x0030: 8add ab96 e052 .....R
Fix by making sure that neighbors are constructed on top of the
blackhole net device with an output function that simply consumes the
packets, in a similar fashion to dst_discard_out() and
blackhole_netdev_xmit().
Fixes: 8d7017fd62 ("blackhole_netdev: use blackhole_netdev to invalidate dst entries")
Fixes: 22600596b6 ("ipv4: give an IPv4 dev to blackhole_netdev")
Reported-by: Florian Meister <fmei@sfs.com>
Closes: https://lore.kernel.org/netdev/20250210084931.23a5c2e4@hermes.local/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250220072559.782296-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCZ7ffOQAKCRAraS+Z+3y5
EzVHAP9h/QkeYoOZW9gul08I8vFiZsFe/lbOSLJWxeVfxb9JhgD/cMqby3qAxQK6
lsdNQ9jYG2232Wym89ag7fvTBK15Wg4=
=gkN2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not all the devices have the capability for the driver to query for the
registered RSS configuration. The driver can discover this by checking
the relevant device option during setup. If it cannot, the driver needs
to store the RSS config cache and directly return such cache when
queried by the ethtool. RSS config is inited when driver probes. Also the
default RSS config will be adjusted when there is RX queue count change.
At this point, only keys of GVE_RSS_KEY_SIZE and indirection tables of
GVE_RSS_INDIR_SIZE are supported.
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Link: https://patch.msgid.link/20250219200451.3348166-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Allwinner H616 SoC has a Mali-G31 MP2 GPU, which is of the Mali
Bifrost family.
Add the SoC specific compatible string and pair it with the bifrost
fallback compatible.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20250221005802.11001-4-andre.przywara@arm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Flit mode introduced in PCIe r6.0 alters how the TLP Header Log is
presented through AER and DPC Capability registers. The TLP Prefix Log
Register is not present with Flit mode, and the register becomes an
extension of the TLP Header Log (PCIe r6.1 secs 7.8.4.12 & 7.9.14.13).
Adapt pcie_read_tlp_log() and struct pcie_tlp_log to read and store the
extended TLP Header Log when the Link is in Flit mode. As the Prefix Log
and Extended TLP Header are not present at the same time, a C union can be
used.
Determining whether the error occurred while the Link was in Flit mode is a
bit complicated. In case of AER, the Advanced Error Capabilities and
Control Register directly tells whether the error was logged in Flit mode
or not (PCIe r6.1 sec 7.8.4.7). The DPC Capability (PCIe r6.1 sec 7.9.14),
unfortunately, does not contain the same information.
Unlike AER, the DPC Capability does not provide a way to discern whether
the error was logged in Flit mode (this is confirmed by PCI WG to be an
oversight in the spec). DPC will bring the Link down immediately following
an error, which makes it impossible to acquire the Flit Mode Status
directly from the Link Status 2 register because Flit Mode Status is only
set in certain Link states (PCIe r6.1 sec 7.5.3.20). As a workaround, use
the flit_mode value stored into the struct pci_bus.
Link: https://lore.kernel.org/r/20250207161836.2755-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCIe r6.0 added Flit mode, which mainly alters HW behavior, but there are
some OS visible changes. The OS visible changes include differences in the
layout of some capabilities and interpretation of the TLP headers (in
diagnostics situations).
To be able to determine which mode the PCIe Link is using, store the Flit
Mode Status (PCIe r6.1 sec 7.5.3.20) information in addition to the Link
speed into struct pci_bus in pcie_update_link_speed().
Link: https://lore.kernel.org/r/20250207161836.2755-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: use unsigned int:1 instead of bool, update flit_mode setting]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
- Add test for creating link in another netns when a link of the same
name and ifindex exists in current netns.
- Add test to verify that link is created in target netns directly -
no link new/del events should be generated in link netns or current
netns.
- Add test cases to verify that link-netns is set as expected for
various drivers and combination of namespace-related parameters.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Link: https://patch.msgid.link/20250219125039.18024-14-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change netns of current thread and switch back on context exit.
For example:
with NetNSEnter("ns1"):
ip("link add dummy0 type dummy")
The command be executed in netns "ns1".
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Link: https://patch.msgid.link/20250219125039.18024-13-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make rtnl_newlink_create() create device in target namespace directly.
Avoid extra netns change when link netns is provided.
Device drivers has been converted to be aware of link netns, that is not
assuming device netns is and link netns is the same when ops->newlink()
is called.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-12-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that devices have been converted to use the specific netns instead
of ambiguous "net", let's remove it from newlink parameters.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-11-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When link_net is set, use it as link netns instead of dev_net(). This
prepares for rtnetlink core to create device in target netns directly,
in which case the two namespaces may be different.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-10-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When link_net is set, use it as link netns instead of dev_net(). This
prepares for rtnetlink core to create device in target netns directly,
in which case the two namespaces may be different.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-9-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
