Joe Damato reports that some shells will fork before running
the command when python does "sh -c $cmd", while bash on my
machine does an exec of $cmd directly.
This will have implications for our ability to terminate
the child process on various configurations of bash and
other shells. Warn about using
bkg(... shell=True, termininate=True)
most background commands can hopefully exit cleanly (exit_wait).
Link: https://lore.kernel.org/Z7Yld21sv_Ip3gQx@LQ3V64L9R2
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check size of struct mfw_hdr within firmware->size before type casting
to ensure to validly dereference fields from mfm_hdr pointer. Then,
check if signature field is equal to RTW89_MFW_SIG to assert current
is multi-firmware.
Addresses-Coverity-ID: 1494046 ("Untrusted loop bound")
Addresses-Coverity-ID: 1544385 ("Untrusted array index read")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-6-pkshih@realtek.com
If failed to load a non-secure firmware with a secure chip, it only throws
a unclear message:
rtw89_8922ae 0000:03:00.0: parse fw header fail
To address this case simpler, add a message to point out this.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-5-pkshih@realtek.com
The sb_sel_ver is selection version for secure boot recorded in firmware
binary data, and its size is 4 and offset is 58 (not natural alignment).
Use get_unaligned_le32() to get this value safely. Find this by reviewing.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-3-pkshih@realtek.com
This patch implements USB mode setting via a sysfs interface in
cros_ec_typec driver. User-space applications can now change the current
USB mode by writing to "usb_mode" sysfs entry, replacing the previous
ioctl-based method.
The embedded controller (EC) currently supports only entering USB4 mode
and exiting all modes (including altmodes). Both of these operations
trigger Data Reset Message, even if no USB Mode is active.
Additionally, the patch exposes the USB modes supported by the port via
"usb_capability" sysfs attribute.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Link: https://lore.kernel.org/r/20250210130419.4110130-1-akuchynski@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
BT-coexistence configure WiFi TX time to share time slots with Bluetooth
devices. Since the format is different from WiFi 6 chips, add the new
format accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217063053.38936-3-pkshih@realtek.com
The agg_limit and txcnt_limit are used by BT-coexistence to reduce
WiFi TX time at once to share time with Bluetooth devices. Since
these registers address are different from WiFi 6 and 7 chips, define
them accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217063053.38936-2-pkshih@realtek.com
A previous patch introduces a build-time warning when CONFIG_DCB
is disabled:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c: In function 'otx2_probe':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:3217:1: error: label 'err_free_zc_bmap' defined but not used [-Werror=unused-label]
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c: In function 'otx2vf_probe':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c:740:1: error: label 'err_free_zc_bmap' defined but not used [-Werror=unused-label]
Add the same #ifdef check around it.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://patch.msgid.link/20250219162239.1376865-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct the hardware revision check comment in the QT2025 driver. The
revision value was documented as 0x3b instead of the correct 0xb3,
which matches the actual comparison logic in the code.
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://patch.msgid.link/20250219-qt2025-comment-fix-v2-1-029f67696516@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EHT MU PPDU contains user field of EHT-SIG field with STA-ID that
must match AID subfield in the Associate Response. Add a necessary
setting to prevent these from being inconsistent.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217061235.32031-1-pkshih@realtek.com
Tariq Toukan says:
====================
mlx5 misc enhancements 2025-02-19
This small series enhances the mlx5 ethtool link speed code (no
functional change), in addition to a Kconfig description enhancement.
====================
Link: https://patch.msgid.link/20250219114112.403808-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function ext_requested() serves two distinct purposes: it checks
if extended link modes were requested, and it selects whether to use
extended or legacy link modes.
This change separates these two purposes. Now, ext_link_mode_requested()
is used directly for checking if extended link modes are requested,
while the selection of extended modes is handled independently based on
the autonegotiation status.
By making this distinction, the logic for determining whether to select
extended or legacy link modes is clearer.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
eth_proto_cap parameter represents the supported link modes,
while eth_proto_admin refers to the configured ones.
The function get_advertising() retrieves the configured link
modes, thus we update its parameter name to eth_proto_admin.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The functions ptys2ethtool_supported_link(), ptys2ethtool_adver_link()
share the same code, thus, in order to remove code duplication we
introduce a new function ptys2ethtool_process_link() to handle the
processing of both supported and advertised link modes.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function ptys2ethtool_adver_link() contains duplicated code that
is found in mlx5e_ethtool_get_speed_arr().
To eliminate this redundancy, we update mlx5e_ethtool_get_speed_arr()
to select the appropriate table based on the ext argument passed by
the caller, rather than querying the supported mode locally.
This allows us to replace the current logic in ptys2ethtool_adver_link()
with a call to mlx5e_ethtool_get_speed_arr().
This adjustment aligns with the ptys2ethtool_supported_link() function
and prepares for an upcoming patch that reduces code duplication.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The implication of the previous help text was that without this option
enabled, representor devices couldn't be added to a bridge device, while
in fact that was possible, just that rules didn't get offloaded to hw.
This commit clarifies the help text.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the vendor driver is claimed to measure 'tssi_alimk_time' of
'struct rtw89_tssi_info' in microseconds, adjust rtw8852b{t}-specific
'_tssi_alimentk()' to not mess the former with nanoseconds and print
both per-call and accumulated times. Compile tested only.
Fixes: 7f18a70d7b ("wifi: rtw89: 8852b: rfk: add TSSI")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250213095006.1308810-1-dmantipov@yandex.ru
kzalloc() uses page allocator when size is larger than
KMALLOC_MAX_CACHE_SIZE, so the intention of commit ab101c553b
("neighbour: use kvzalloc()/kvfree()") can be achieved by using kzalloc().
When using GFP_ATOMIC, kvzalloc() only tries the kmalloc path,
since the vmalloc path does not support the flag.
In this case, kvzalloc() is equivalent to kzalloc() in that neither try
the vmalloc path, so this replacement brings no functional change.
This is primarily a cleanup change, as the original code functions
correctly.
This patch replaces kvzalloc() introduced by commit 41b3caa7c0
("neighbour: Add hlist_node to struct neighbour"), which is called in
the same context and with the same gfp flag as the aforementioned commit
ab101c553b ("neighbour: use kvzalloc()/kvfree()").
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://patch.msgid.link/20250219102227.72488-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Peter Seiderer says:
====================
Some pktgen fixes/improvments (part I)
While taking a look at '[PATCH net] pktgen: Avoid out-of-range in
get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds
access in get_imix_entries' ([2], [3]) and doing some tests and code review
I detected that the /proc/net/pktgen/... parsing logic does not honour the
user given buffer bounds (resulting in out-of-bounds access).
This can be observed e.g. by the following simple test (sometimes the
old/'longer' previous value is re-read from the buffer):
$ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0
$ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0
Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0
Result: OK: min_pkt_size=12345
$ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0
Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0
Result: OK: min_pkt_size=12345
$ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0
Params: count 1000 min_pkt_size: 123 max_pkt_size: 0
Result: OK: min_pkt_size=123
So fix the out-of-bounds access (and some minor findings) and add a simple
proc_net_pktgen selftest...
[1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@red-soft.ru/
[2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76201b5979768500bca362871db66d77cb4c225e
====================
Link: https://patch.msgid.link/20250219084527.20488-1-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Honour the user given buffer size for the strn_len() calls (otherwise
strn_len() will access memory outside of the user given buffer).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-8-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable command writing without trailing '\n':
- the good case
$ echo "reset" > /proc/net/pktgen/pgctrl
- the bad case (before the patch)
$ echo -n "reset" > /proc/net/pktgen/pgctrl
-bash: echo: write error: Invalid argument
- with patch applied
$ echo -n "reset" > /proc/net/pktgen/pgctrl
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-7-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Given an invalid 'ratep' command e.g. 'ratep 0' the return value is '1',
leading to the following misleading output:
- the good case
$ echo "ratep 100" > /proc/net/pktgen/lo\@0
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: OK: ratep=100
- the bad case (before the patch)
$ echo "ratep 0" > /proc/net/pktgen/lo\@0"
-bash: echo: write error: Invalid argument
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: No such parameter "atep"
- with patch applied
$ echo "ratep 0" > /proc/net/pktgen/lo\@0
-bash: echo: write error: Invalid argument
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: Idle
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-6-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Given an invalid 'rate' command e.g. 'rate 0' the return value is '1',
leading to the following misleading output:
- the good case
$ echo "rate 100" > /proc/net/pktgen/lo\@0
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: OK: rate=100
- the bad case (before the patch)
$ echo "rate 0" > /proc/net/pktgen/lo\@0"
-bash: echo: write error: Invalid argument
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: No such parameter "ate"
- with patch applied
$ echo "rate 0" > /proc/net/pktgen/lo\@0
-bash: echo: write error: Invalid argument
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: Idle
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-5-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace ENOTSUPP with EOPNOTSUPP, fixes checkpatch hint
WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP
and e.g.
$ echo "clone_skb 1" > /proc/net/pktgen/lo\@0
-bash: echo: write error: Unknown error 524
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-2-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Loongson's DWMAC device may take nearly two seconds to complete DMA reset,
however, the default waiting time for reset is 200 milliseconds.
Therefore, the following error message may appear:
[14.427169] dwmac-loongson-pci 0000:00:03.2: Failed to reset the dma
Fixes: 803fc61df2 ("net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support")
Cc: stable@vger.kernel.org
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250219020701.15139-1-zhaoqunqin@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow a boolean property of "x-powers,no-thermistor" to specify devices
where the ts pin is not connected to anything. This works around an
issue found with some devices where the efuse is not programmed
correctly from the factory or when the register gets set erroneously.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-4-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add the vendor specific boolean property of x-powers,no-thermistor.
This property optionally describes hardware where no thermistor is
present on the battery and is specific to the AXP717. In rare
circumstances this value can be set incorrectly in the efuse of the
PMIC, and if it is not hard-coded the device will fail to charge.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250204155835.161973-2-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=6RmG
-----END PGP SIGNATURE-----
Merge tag 'tags/ib-mfd-power-v6.15' into psy-next
Immutable branch between MFD and Power due for the v6.15 merge window
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This driver is used to control the power state of the devices attached to
the PCI slots. Currently, it controls the voltage rails of the PCI slots
defined in the devicetree node of the root port.
The voltage rails for PCI slots are documented in the DT-schema:
https://github.com/devicetree-org/dt-schema/blob/v2024.11/dtschema/schemas/pci/pci-bus-common.yaml#L153
Since this driver has to work with different kind of slots (PCIe
x1/x4/x8/x16, Mini PCIe, PCI, etc.), the driver is thus using the
of_regulator_bulk_get_all() API to obtain the voltage regulators defined
in the DT node, instead of hardcoding them.
As such, the DT node of the root port should define the relevant supply
properties corresponding to the voltage rails of the PCI slot.
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250116-pci-pwrctrl-slot-v3-5-827473c8fbf4@linaro.org
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The "pciclass" is an existing prefix used to identify the PCI bridge
devices, but it is not a vendor prefix. So document it in the non-vendor
prefix list.
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250116-pci-pwrctrl-slot-v3-4-827473c8fbf4@linaro.org
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
When doing error injection to some memory DIMMs on certain Intel Emerald
Rapids servers, the i10nm_edac missed error reports for some memory DIMMs.
Certain BIOS configurations may hide some memory controllers, and the
i10nm_edac doesn't enumerate these hidden memory controllers. However, the
ADXL decodes memory errors using memory controller physical indices even
if there are hidden memory controllers. Therefore, the memory controller
physical indices reported by the ADXL may mismatch the logical indices
enumerated by the i10nm_edac, resulting in missed error reports for some
memory DIMMs.
Fix this issue by creating a mapping table from memory controller physical
indices (used by the ADXL) to logical indices (used by the i10nm_edac) and
using it to convert the physical indices to the logical indices during the
error handling process.
Fixes: c545f5e412 ("EDAC/i10nm: Skip the absent memory controllers")
Reported-by: Kevin Chang <kevin1.chang@intel.com>
Tested-by: Kevin Chang <kevin1.chang@intel.com>
Reported-by: Thomas Chen <Thomas.Chen@intel.com>
Tested-by: Thomas Chen <Thomas.Chen@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20250214002728.6287-1-qiuxu.zhuo@intel.com
gcc-14 produces a bogus warning in some configurations:
drivers/edac/ie31200_edac.c: In function 'ie31200_probe1.isra':
drivers/edac/ie31200_edac.c:412:26: error: 'dimm_info' is used uninitialized [-Werror=uninitialized]
412 | struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
| ^~~~~~~~~
drivers/edac/ie31200_edac.c:412:26: note: 'dimm_info' declared here
412 | struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
| ^~~~~~~~~
I don't see any way the unintialized access could really happen here,
but I can see why the compiler gets confused by the two loops.
Instead, rework the two nested loops to only read the addr_decode
registers and then keep only one instance of the dimm info structure.
[Tony: Qiuxu pointed out that the "populate DIMM info" comment was left
behind in the refactor and suggested moving it. I deleted the comment
as unnecessry in front os a call to populate_dimm_info(). That seems
pretty self-describing.]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20250122065031.1321015-1-arnd@kernel.org
Fixes for v6.14-rc4
Display:
* More catalog fixes:
- to skip watchdog programming through top block if its not present
- fix the setting of WB mask to ensure the WB input control is programmed
correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any 3dmerge block
* Fix the mode validation logic for DP/eDP to account for widebus (2ppc)
to allow high clock resolutions
* Fix to disable dither during encoder disable as otherwise this was
causing kms_writeback failure due to resource sharing between
* WB and DSI paths as DSI uses dither but WB does not
* Fixes for virtual planes, namely to drop extraneous return and fix
uninitialized variables
* Fix to avoid spill-over of DSC encoder block bits when programming
the bits-per-component
* Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
Core/GPU:
* Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout
* Only print GMU fw version once, instead of each time the GPU resumes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtt2AODBXdod8ULXcAygf_qYvwRDVeUVtODx=2jErp6cA@mail.gmail.com
- Fixes on DDI and TRANS programming (Imre)
- Make sure all planes in use by the joiner have their crtc included (Ville)
- Fix 128b/132b modeset issues (Imre)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAme3X+8ACgkQ+mJfZA7r
E8oEIwf/SBXdcra62NfaJqmT68CYBmp6UMocftVW1n0JiXUmhqTZ0N00SkEZz1jO
6fGpZGmwquvPM6iDWw4ePJdcKMfxyv60VYbHRmNWkHMrlLBRU5v2bXfuOhqoTwWz
+tl5AVdmrCJGcifxHoxwoMJOISQXPqa5E02dCCREBM0KuaNYVcIvamLNfYrVF6id
UDPp+x8IBJ9vlUfSkju74orB2HckevG03/i7XogmAVKGgqskX2KJ0etWBRxT9Xqi
WbOXS92EEIR58DNvUYj9My7ssbwnM1oVHJHx5r14eKLSSxoGU4JFUsDqbl3pRnr3
b4q1KZftaTUuabH2dUiY3qMUtP+q9A==
=6gjX
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2025-02-20' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Use spin_lock_irqsave() in interruptible context on guc submission (Krzysztof)
- Fixes on DDI and TRANS programming (Imre)
- Make sure all planes in use by the joiner have their crtc included (Ville)
- Fix 128b/132b modeset issues (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z7dgcUG_hvityvHn@intel.com
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)
-----BEGIN PGP SIGNATURE-----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=QHUq
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.14-2025-02-20' of git://git.infradead.org/nvme into block-6.14
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.14
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)"
* tag 'nvme-6.14-2025-02-20' of git://git.infradead.org/nvme:
nvme: only allow entering LIVE from CONNECTING state
nvme-fc: rely on state transitions to handle connectivity loss
apple-nvme: Support coprocessors left idle
apple-nvme: Release power domains when probe fails
nvmet: Use enum definitions instead of hardcoded values
nvme: Cleanup the definition of the controller config register fields
nvme/ioctl: add missing space in err message
nvme-tcp: fix connect failure on receiving partial ICResp PDU
nvme: tcp: Fix compilation warning with W=1
nvmet: pci-epf: Avoid RCU stalls under heavy workload
nvmet: pci-epf: Do not uselessly write the CSTS register
nvmet: pci-epf: Correctly initialize CSTS when enabling the controller
nvmet-rdma: recheck queue state is LIVE in state lock in recv done
nvmet: Fix crash when a namespace is disabled
nvme-tcp: add basic support for the C2HTermReq PDU
nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
- Fix a soft-lockup in BPF arena_map_free on 64k page size
kernels (Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding
kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's
freeze_mutex (Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when
eth_skb_pkt_type is accessing skb data not containing an
Ethernet header (Shigeru Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch
(Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2)
in user space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ7evlRUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPwHgD/dTvM00Ck4Q73fPivyT7tcqxeXJlD
D6ggzWl/SG9LAbwA/2/cSgAM9Jm1g7ddvn/S9QaDYOs5GmFl6urq6krs+tYD
=FCs9
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
Fix an issue with the sparse static analysis tool where an
"undefined 'other'" error occurs due to `__releases(&unix_sk(other)->lock)`
being placed before 'other' is in scope.
Remove the `__releases()` annotation from the `unix_wait_for_peer()`
function to eliminate the sparse error. The annotation references `other`
before it is declared, leading to a false positive error during static
analysis.
Since AF_UNIX does not use sparse annotations, this annotation is
unnecessary and does not impact functionality.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250218141045.38947-1-purvayeshi550@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to job transition, I am stepping down as RDT maintainer.
Add Tony as a co-maintainer.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20250131190731.3981085-1-fenghua.yu%40intel.com
fix and config fix in nouveau, a dmem cgroup descendant pool handling
fix, and a missing header for amdxdna.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZ7bn6AAKCRAnX84Zoj2+
djJnAX9XDHzW0CCJnF8UopQearYcn2DPKrXvLKWwwpSothyoOFiIHyifP7fHlQBX
XA5+iIQBf1RZq3uTeqbaq3DeD0Pf9LrRUC41g3H7HO9Lt0/Bp2dnRqJJgZVxIg+h
57yAKxQ5Cw==
=PwGs
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2025-02-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
An reset signal polarity fix for the jd9365da-h3 panel, a folio handling
fix and config fix in nouveau, a dmem cgroup descendant pool handling
fix, and a missing header for amdxdna.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220-glorious-cockle-of-might-5b35f7@houat
Song Yoong Siang says:
====================
xsk: TX metadata Launch Time support
This series expands the XDP TX metadata framework to allow user
applications to pass per packet 64-bit launch time directly to the kernel
driver, requesting launch time hardware offload support. The XDP TX
metadata framework will not perform any clock conversion or packet
reordering.
Please note that the role of Tx metadata is just to pass the launch time,
not to enable the offload feature. Users will need to enable the launch
time hardware offload feature of the device by using the respective
command, such as the tc-etf command.
Although some devices use the tc-etf command to enable their launch time
hardware offload feature, xsk packets will not go through the etf qdisc.
Therefore, in my opinion, the launch time should always be based on the PTP
Hardware Clock (PHC). Thus, i did not include a clock ID to indicate the
clock source.
To simplify the test steps, I modified the xdp_hw_metadata bpf self-test
tool in such a way that it will set the launch time based on the offset
provided by the user and the value of the Receive Hardware Timestamp, which
is against the PHC. This will eliminate the need to discipline System Clock
with the PHC and then use clock_gettime() to get the time.
Please note that AF_XDP lacks a feedback mechanism to inform the
application if the requested launch time is invalid. So, users are expected
to familiar with the horizon of the launch time of the device they use and
not request a launch time that is beyond the horizon. Otherwise, the driver
might interpret the launch time incorrectly and react wrongly. For stmmac
and igc, where modulo computation is used, a launch time larger than the
horizon will cause the device to transmit the packet earlier that the
requested launch time.
Although there is no feedback mechanism for the launch time request
for now, user still can check whether the requested launch time is
working or not, by requesting the Transmit Completion Hardware Timestamp.
v12:
- Fix the comment in include/uapi/linux/if_xdp.h to allign with what is
generated by ./tools/net/ynl/ynl-regen.sh to avoid dirty tree error in
the netdev/ynl checks.
v11: https://lore.kernel.org/netdev/20250216074302.956937-1-yoong.siang.song@intel.com/
- regenerate netdev_xsk_flags based on latest netdev.yaml (Jakub)
v10: https://lore.kernel.org/netdev/20250207021943.814768-1-yoong.siang.song@intel.com/
- use net_err_ratelimited(), instead of net_ratelimit() (Maciej)
- accumulate the amount of used descs in local variable and update the
igc_metadata_request::used_desc once (Maciej)
- Ensure reverse christmas tree rule (Maciej)
V9: https://lore.kernel.org/netdev/20250206060408.808325-1-yoong.siang.song@intel.com/
- Remove the igc_desc_unused() checking (Maciej)
- Ensure that skb allocation and DMA mapping work before proceeding to
fill in igc_tx_buffer info, context desc, and data desc (Maciej)
- Rate limit the error messages (Maciej)
- Update the comment to indicate that the 2 descriptors needed by the
empty frame are already taken into consideration (Maciej)
- Handle the case where the insertion of an empty frame fails and
explain the reason behind (Maciej)
- put self SOB tag as last tag (Maciej)
V8: https://lore.kernel.org/netdev/20250205024116.798862-1-yoong.siang.song@intel.com/
- check the number of used descriptor in xsk_tx_metadata_request()
by using used_desc of struct igc_metadata_request, and then decreases
the budget with it (Maciej)
- submit another bug fix patch to set the buffer type for empty frame (Maciej):
https://lore.kernel.org/netdev/20250205023603.798819-1-yoong.siang.song@intel.com/
V7: https://lore.kernel.org/netdev/20250204004907.789330-1-yoong.siang.song@intel.com/
- split the refactoring code of igc empty packet insertion into a separate
commit (Faizal)
- add explanation on why the value "4" is used as igc transmit budget
(Faizal)
- perform a stress test by sending 1000 packets with 10ms interval and
launch time set to 500us in the future (Faizal & Yong Liang)
V6: https://lore.kernel.org/netdev/20250116155350.555374-1-yoong.siang.song@intel.com/
- fix selftest build errors by using asprintf() and realloc(), instead of
managing the buffer sizes manually (Daniel, Stanislav)
V5: https://lore.kernel.org/netdev/20250114152718.120588-1-yoong.siang.song@intel.com/
- change netdev feature name from tx-launch-time to tx-launch-time-fifo
to explicitly state the FIFO behaviour (Stanislav)
- improve the looping of xdp_hw_metadata app to wait for packet tx
completion to be more readable by using clock_gettime() (Stanislav)
- add launch time setup steps into xdp_hw_metadata app (Stanislav)
V4: https://lore.kernel.org/netdev/20250106135506.9687-1-yoong.siang.song@intel.com/
- added XDP launch time support to the igc driver (Jesper & Florian)
- added per-driver launch time limitation on xsk-tx-metadata.rst (Jesper)
- added explanation on FIFO behavior on xsk-tx-metadata.rst (Jakub)
- added step to enable launch time in the commit message (Jesper & Willem)
- explicitly documented the type of launch_time and which clock source
it is against (Willem)
V3: https://lore.kernel.org/netdev/20231203165129.1740512-1-yoong.siang.song@intel.com/
- renamed to use launch time (Jesper & Willem)
- changed the default launch time in xdp_hw_metadata apps from 1s to 0.1s
because some NICs do not support such a large future time.
V2: https://lore.kernel.org/netdev/20231201062421.1074768-1-yoong.siang.song@intel.com/
- renamed to use Earliest TxTime First (Willem)
- renamed to use txtime (Willem)
V1: https://lore.kernel.org/netdev/20231130162028.852006-1-yoong.siang.song@intel.com/
====================
Link: https://patch.msgid.link/20250216093430.957880-1-yoong.siang.song@intel.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Enable Launch Time Control (LTC) support for XDP zero copy via XDP Tx
metadata framework.
This patch has been tested with tools/testing/selftests/bpf/xdp_hw_metadata
on Intel I225-LM Ethernet controller. Below are the test steps and result.
Test 1: Send a single packet with the launch time set to 1 s in the future.
Test steps:
1. On the DUT, start the xdp_hw_metadata selftest application:
$ sudo ./xdp_hw_metadata enp2s0 -l 1000000000 -L 1
2. On the Link Partner, send a UDP packet with VLAN priority 1 to port 9091
of the DUT.
Result:
When the launch time is set to 1 s in the future, the delta between the
launch time and the transmit hardware timestamp is 0.016 us, as shown in
printout of the xdp_hw_metadata application below.
0x562ff5dc8880: rx_desc[4]->addr=84110 addr=84110 comp_addr=84110 EoP
rx_hash: 0xE343384 with RSS type:0x1
HW RX-time: 1734578015467548904 (sec:1734578015.4675)
delta to User RX-time sec:0.0002 (183.103 usec)
XDP RX-time: 1734578015467651698 (sec:1734578015.4677)
delta to User RX-time sec:0.0001 (80.309 usec)
No rx_vlan_tci or rx_vlan_proto, err=-95
0x562ff5dc8880: ping-pong with csum=561c (want c7dd)
csum_start=34 csum_offset=6
HW RX-time: 1734578015467548904 (sec:1734578015.4675)
delta to HW Launch-time sec:1.0000 (1000000.000 usec)
0x562ff5dc8880: complete tx idx=4 addr=4018
HW Launch-time: 1734578016467548904 (sec:1734578016.4675)
delta to HW TX-complete-time sec:0.0000 (0.016 usec)
HW TX-complete-time: 1734578016467548920 (sec:1734578016.4675)
delta to User TX-complete-time sec:0.0000
(32.546 usec)
XDP RX-time: 1734578015467651698 (sec:1734578015.4677)
delta to User TX-complete-time sec:0.9999
(999929.768 usec)
HW RX-time: 1734578015467548904 (sec:1734578015.4675)
delta to HW TX-complete-time sec:1.0000 (1000000.016 usec)
0x562ff5dc8880: complete rx idx=132 addr=84110
Test 2: Send 1000 packets with a 10 ms interval and the launch time set to
500 us in the future.
Test steps:
1. On the DUT, start the xdp_hw_metadata selftest application:
$ sudo chrt -f 99 ./xdp_hw_metadata enp2s0 -l 500000 -L 1 > \
/dev/shm/result.log
2. On the Link Partner, send 1000 UDP packets with a 10 ms interval and
VLAN priority 1 to port 9091 of the DUT.
Result:
When the launch time is set to 500 us in the future, the average delta
between the launch time and the transmit hardware timestamp is 0.016 us,
as shown in the analysis of /dev/shm/result.log below. The XDP launch time
works correctly in sending 1000 packets continuously.
Min delta: 0.005 us
Avr delta: 0.016 us
Max delta: 0.031 us
Total packets forwarded: 1000
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250216093430.957880-6-yoong.siang.song@intel.com
Refactor the code for inserting an empty frame into a new function
igc_insert_empty_frame(). This change extracts the logic for inserting
an empty packet from igc_xmit_frame_ring() into a separate function,
allowing it to be reused in future implementations, such as the XDP
zero copy transmit function.
Remove the igc_desc_unused() checking in igc_init_tx_empty_descriptor()
because the number of descriptors needed is guaranteed.
Ensure that skb allocation and DMA mapping work for the empty frame,
before proceeding to fill in igc_tx_buffer info, context descriptor,
and data descriptor.
Rate limit the error messages for skb allocation and DMA mapping failures.
Update the comment to indicate that the 2 descriptors needed by the empty
frame are already taken into consideration in igc_xmit_frame_ring().
Handle the case where the insertion of an empty frame fails and explain
the reason behind this handling.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250216093430.957880-5-yoong.siang.song@intel.com
