When a task is enqueued and its parent cgroup se is already on_rq, this
parent cgroup se will not be enqueued again, and hence the root->min_slice
leaves unchanged. The same issue happens when a task is dequeued and its
parent cgroup se has other runnable entities, and the parent cgroup se
will not be dequeued.
Force propagating min_slice when se doesn't need to be enqueued or
dequeued. Ensure the se hierarchy always get the latest min_slice.
Fixes: aef6987d89 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250211063659.7180-1-dtcccc@linux.alibaba.com
The sched_clock_irqtime was defined as a static key in commit 8722903cbb
('sched: Define sched_clock_irqtime as static key'). However, this change
introduces a 'sleeping in atomic context' warning, as shown below:
arch/x86/kernel/tsc.c:1214 mark_tsc_unstable()
warn: sleeping in atomic context
As analyzed by Dan, the affected code path is as follows:
vcpu_load() <- disables preempt
-> kvm_arch_vcpu_load()
-> mark_tsc_unstable() <- sleeps
virt/kvm/kvm_main.c
166 void vcpu_load(struct kvm_vcpu *vcpu)
167 {
168 int cpu = get_cpu();
^^^^^^^^^^
This get_cpu() disables preemption.
169
170 __this_cpu_write(kvm_running_vcpu, vcpu);
171 preempt_notifier_register(&vcpu->preempt_notifier);
172 kvm_arch_vcpu_load(vcpu, cpu);
173 put_cpu();
174 }
arch/x86/kvm/x86.c
4979 if (unlikely(vcpu->cpu != cpu) || kvm_check_tsc_unstable()) {
4980 s64 tsc_delta = !vcpu->arch.last_host_tsc ? 0 :
4981 rdtsc() - vcpu->arch.last_host_tsc;
4982 if (tsc_delta < 0)
4983 mark_tsc_unstable("KVM discovered backwards TSC");
arch/x86/kernel/tsc.c
1206 void mark_tsc_unstable(char *reason)
1207 {
1208 if (tsc_unstable)
1209 return;
1210
1211 tsc_unstable = 1;
1212 if (using_native_sched_clock())
1213 clear_sched_clock_stable();
--> 1214 disable_sched_clock_irqtime();
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
kernel/jump_label.c
245 void static_key_disable(struct static_key *key)
246 {
247 cpus_read_lock();
^^^^^^^^^^^^^^^^
This lock has a might_sleep() in it which triggers the static checker
warning.
248 static_key_disable_cpuslocked(key);
249 cpus_read_unlock();
250 }
Let revert this change for now as {disable,enable}_sched_clock_irqtime
are used in many places, as pointed out by Sean, including the following:
The code path in clocksource_watchdog():
clocksource_watchdog()
|
-> spin_lock(&watchdog_lock);
|
-> __clocksource_unstable()
|
-> clocksource.mark_unstable() == tsc_cs_mark_unstable()
|
-> disable_sched_clock_irqtime()
And the code path in sched_clock_register():
/* Cannot register a sched_clock with interrupts on */
local_irq_save(flags);
...
/* Enable IRQ time accounting if we have a fast enough sched_clock() */
if (irqtime > 0 || (irqtime == -1 && rate >= 1000000))
enable_sched_clock_irqtime();
local_irq_restore(flags);
[lkp@intel.com: reported a build error in the prev version]
Closes: https://lore.kernel.org/kvm/37a79ba3-9ce0-479c-a5b0-2bd75d573ed3@stanley.mountain/
Fixes: 8722903cbb ("sched: Define sched_clock_irqtime as static key")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Debugged-by: Dan Carpenter <dan.carpenter@linaro.org>
Debugged-by: Sean Christopherson <seanjc@google.com>
Debugged-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250205032438.14668-1-laoar.shao@gmail.com
The old default value for slice is 0.75 msec * (1 + ilog(ncpus)) which
means that we have a default slice of:
0.75 for 1 cpu
1.50 up to 3 cpus
2.25 up to 7 cpus
3.00 for 8 cpus and above.
For HZ=250 and HZ=100, because of the tick accuracy, the runtime of
tasks is far higher than their slice.
For HZ=1000 with 8 cpus or more, the accuracy of tick is already
satisfactory, but there is still an issue that tasks will get an extra
tick because the tick often arrives a little faster than expected. In
this case, the task can only wait until the next tick to consider that it
has reached its deadline, and will run 1ms longer.
vruntime + sysctl_sched_base_slice = deadline
|-----------|-----------|-----------|-----------|
1ms 1ms 1ms 1ms
^ ^ ^ ^
tick1 tick2 tick3 tick4(nearly 4ms)
There are two reasons for tick error: clockevent precision and the
CONFIG_IRQ_TIME_ACCOUNTING/CONFIG_PARAVIRT_TIME_ACCOUNTING. with
CONFIG_IRQ_TIME_ACCOUNTING every tick will be less than 1ms, but even
without it, because of clockevent precision, tick still often less than
1ms.
In order to make scheduling more precise, we changed 0.75 to 0.70,
Using 0.70 instead of 0.75 should not change much for other configs
and would fix this issue:
0.70 for 1 cpu
1.40 up to 3 cpus
2.10 up to 7 cpus
2.8 for 8 cpus and above.
This does not guarantee that tasks can run the slice time accurately
every time, but occasionally running an extra tick has little impact.
Signed-off-by: zihan zhou <15645113830zzh@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250208075322.13139-1-15645113830zzh@gmail.com
A wakeup non-idle entity should preempt idle entity at any time,
but because of the slice protection of the idle entity, the non-idle
entity has to wait, so just cancel it.
This patch is aimed at minimizing the impact of SCHED_IDLE on
SCHED_NORMAL. For example, a task with SCHED_IDLE policy that sleeps for
1s and then runs for 3 ms, running cyclictest on the same cpu, has a
maximum latency of 3 ms, which is caused by the slice protection of the
idle entity. It is unreasonable. With this patch, the cyclictest latency
under the same conditions is basically the same on the cpu with idle
processes and on empty cpu.
[peterz: add helpers]
Fixes: 63304558ba ("sched/eevdf: Curb wakeup-preemption")
Signed-off-by: zihan zhou <15645113830zzh@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250208080850.16300-1-15645113830zzh@gmail.com
The Tegra264 SoC supports the UART Trace Controller (UTC), which allows
multiple firmware clients (up to 16) to share a single physical UART.
Each client is provided with its own interrupt and has access to a
128-character wide FIFO for both transmit (TX) and receive (RX)
operations.
Add tegra-utc driver to support Tegra UART Trace Controller (UTC)
client.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250213125612.4705-3-kkartik@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Tegra UTC (UART Trace Controller) allows multiple clients within
the Tegra SoC to share a physical UART interface. It supports up to 16
clients. Each client operates as an independent UART endpoint with a
dedicated interrupt and 128-character TX/RX FIFOs.
Add device tree binding documentation for the Tegra UTC client.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250213125612.4705-2-kkartik@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 5a14fead07.
No architectures ever implemented `enable_nmi` since the later patches
in the series adding it never landed. It's been a long time. Drop it.
NOTE: this is not a clean revert due to changes in the file in the
meantime.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250129082535.3.I2254953cd852f31f354456689d68b2d910de3fbe@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ad394f66fa.
No architectures ever implemented `enable_nmi` since the later patches
in the series adding it never landed. It's been a long time. Drop it.
NOTE: this is not a clean revert due to changes in the file in the
meantime.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250129082535.2.Ib91bfb95bdcf77591257a84063fdeb5b4dce65b1@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 0c57dfcc6c.
The functionality was supoosed to be used by a later patch in the
series that never landed [1]. Drop it.
NOTE: part of functionality was already reverted by commit
39d0be8743 ("serial: kgdb_nmi: Remove unused knock code"). Also note
that this revert is not a clean revert given code changes that have
happened in the meantime.
It's obvious that nobody is using this code since the two exposed
functions (kgdb_register_nmi_console() and
kgdb_unregister_nmi_console()) are both no-ops if
"arch_kgdb_ops.enable_nmi" is not defined. No architectures define it.
[1] https://lore.kernel.org/lkml/1348522080-32629-9-git-send-email-anton.vorontsov@linaro.org/
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: URL [1]
Link: https://lore.kernel.org/r/20250129082535.1.Ia095eac1ae357f87d23e7af2206741f5d40788f1@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Not all the cases provide the driver data, that is represented by
an object instance of struct dw8250_platform_data. Id est the change
missed the case when the driver is instantiated via board files as
pure platform driver. Fix this by calling dw8250_quirks() conditionally.
This will require splitting dw8250_setup_dma_filter() out of dw8250_quirks().
Also make sure IRQ handler won't crash, it also requires driver data
to be present.
Fixes: bfd3d4a40f ("serial: 8250_dw: Drop unneeded NULL checks in dw8250_quirks()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502121529.f7e65d49-lkp@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250212115952.2312444-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Renesas RZ/G3S supports a power saving mode where power to most of the
SoC components is turned off. When returning from this power saving mode,
SoC components need to be re-configured.
The SCIFs on the Renesas RZ/G3S need to be re-configured as well when
returning from this power saving mode. The sh-sci code already configures
the SCIF clocks, power domain and registers by calling uart_resume_port()
in sci_resume(). On suspend path the SCIF UART ports are suspended
accordingly (by calling uart_suspend_port() in sci_suspend()). The only
missing setting is the reset signal. For this assert/de-assert the reset
signal on driver suspend/resume.
In case the no_console_suspend is specified by the user, the registers need
to be saved on suspend path and restore on resume path. To do this the
sci_console_save()/sci_console_restore() functions were added. There is no
need to cache/restore the status or FIFO registers. Only the control
registers. The registers that will be saved/restored on suspend/resume are
specified by the struct sci_suspend_regs data structure.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250207113313.545432-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While testing on a Freescale MPC8314E board, I noticed that changing
the UART compatible string from ns16550 to ns16550a breaks the output,
suggesting that the FIFOs don't work correctly. To accommodate this
fact, move the definition of fsl,ns16550 to the section of 8250.yaml
that allows broken FIFOs.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250209-uartfifo-v1-1-501a510a5f07@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SoCs like the i.MX93 have several lpuart interfaces, but fsl_lpuart
uses the driver name to request the IRQ. This makes it hard to
identify interfaces from outputs like /proc/interrupts .
So use the dev_name() for requesting instead.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250205091007.4528-1-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3
amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo
irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3
irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293
irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197
irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101
irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Fixes: 9ee4b83e51 ("serial: 8250: Add support for dmaengine")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the brand new xfstest that tries to swapon on a recently unshared
file and use the chance to document the other bit of magic in this
function.
The big comment is taken from a mailinglist post by Dave Chinner.
Fixes: 5e672cd69f ("xfs: introduce xfs_inodegc_push()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Match the method name and the naming convention or address_space
operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Mounting a filesystem that requires quota state changing will generate a
transaction.
We already check for a read-only device; we should do that for
norecovery too.
A quotacheck on a norecovery mount, and with the right log size, will cause
the mount process to hang on:
[<0>] xlog_grant_head_wait+0x5d/0x2a0 [xfs]
[<0>] xlog_grant_head_check+0x112/0x180 [xfs]
[<0>] xfs_log_reserve+0xe3/0x260 [xfs]
[<0>] xfs_trans_reserve+0x179/0x250 [xfs]
[<0>] xfs_trans_alloc+0x101/0x260 [xfs]
[<0>] xfs_sync_sb+0x3f/0x80 [xfs]
[<0>] xfs_qm_mount_quotas+0xe3/0x2f0 [xfs]
[<0>] xfs_mountfs+0x7ad/0xc20 [xfs]
[<0>] xfs_fs_fill_super+0x762/0xa50 [xfs]
[<0>] get_tree_bdev_flags+0x131/0x1d0
[<0>] vfs_get_tree+0x26/0xd0
[<0>] vfs_cmd_create+0x59/0xe0
[<0>] __do_sys_fsconfig+0x4e3/0x6b0
[<0>] do_syscall_64+0x82/0x160
[<0>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is caused by a transaction running with bogus initialized head/tail
I initially hit this while running generic/050, with random log
sizes, but I managed to reproduce it reliably here with the steps
below:
mkfs.xfs -f -lsize=1025M -f -b size=4096 -m crc=1,reflink=1,rmapbt=1, -i
sparse=1 /dev/vdb2 > /dev/null
mount -o usrquota,grpquota,prjquota /dev/vdb2 /mnt
xfs_io -x -c 'shutdown -f' /mnt
umount /mnt
mount -o ro,norecovery,usrquota,grpquota,prjquota /dev/vdb2 /mnt
Last mount hangs up
As we add yet another validation if quota state is changing, this also
add a new helper named xfs_qm_validate_state_change(), factoring the
quota state changes out of xfs_qm_newmount() to reduce cluttering
within it.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
If there is corrutpion on the filesystem andxfs_repair
fails to repair it. The last resort of getting the data
is to use norecovery,ro mount. But if the NEEDSREPAIR is
set the filesystem cannot be mounted. The flag must be
cleared out manually using xfs_db, to get access to what
left over of the corrupted fs.
Signed-off-by: Lukas Herbolt <lukas@herbolt.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Coverity noticed that xrep_dinode_bad_metabt_fork never runs because
XFS_DINODE_FMT_META_BTREE is always filtered out in the mode selection
switch of xrep_dinode_check_dfork.
Metadata btrees are allowed only in the data forks of regular files, so
add this case explicitly. I guess this got fubard during a refactoring
prior to 6.13 and I didn't notice until now. :/
Coverity-id: 1617714
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
I received a report from the release engineering side of the house that
xfs_scrub without the -n flag (aka fix it mode) would try to fix a
broken filesystem even on a kernel that doesn't have online repair built
into it:
# xfs_scrub -dTvn /mnt/test
EXPERIMENTAL xfs_scrub program in use! Use at your own risk!
Phase 1: Find filesystem geometry.
/mnt/test: using 1 threads to scrub.
Phase 1: Memory used: 132k/0k (108k/25k), time: 0.00/ 0.00/ 0.00s
<snip>
Phase 4: Repair filesystem.
<snip>
Info: /mnt/test/some/victimdir directory entries: Attempting repair. (repair.c line 351)
Corruption: /mnt/test/some/victimdir directory entries: Repair unsuccessful; offline repair required. (repair.c line 204)
Source: https://blogs.oracle.com/linux/post/xfs-online-filesystem-repair
It is strange that xfs_scrub doesn't refuse to run, because the kernel
is supposed to return EOPNOTSUPP if we actually needed to run a repair,
and xfs_io's repair subcommand will perror that. And yet:
# xfs_io -x -c 'repair probe' /mnt/test
#
The first problem is commit dcb660f922 (4.15) which should have had
xchk_probe set the CORRUPT OFLAG so that any of the repair machinery
will get called at all.
It turns out that some refactoring that happened in the 6.6-6.8 era
broke the operation of this corner case. What we *really* want to
happen is that all the predicates that would steer xfs_scrub_metadata()
towards calling xrep_attempt() should function the same way that they do
when repair is compiled in; and then xrep_attempt gets to return the
fatal EOPNOTSUPP error code that causes the probe to fail.
Instead, commit 8336a64eb7 (6.6) started the failwhale swimming by
hoisting OFLAG checking logic into a helper whose non-repair stub always
returns false, causing scrub to return "repair not needed" when in fact
the repair is not supported. Prior to that commit, the oflag checking
that was open-coded in scrub.c worked correctly.
Similarly, in commit 4bdfd7d157 (6.8) we hoisted the IFLAG_REPAIR
and ALREADY_FIXED logic into a helper whose non-repair stub always
returns false, so we never enter the if test body that would have called
xrep_attempt, let alone fail to decode the OFLAGs correctly.
The final insult (yes, we're doing The Naked Gun now) is commit
48a72f6086 (6.8) in which we hoisted the "are we going to try a
repair?" predicate into yet another function with a non-repair stub
always returns false.
Fix xchk_probe to trigger xrep_probe if repair is enabled, or return
EOPNOTSUPP directly if it is not. For all the other scrub types, we
need to fix the header predicates so that the ->repair functions (which
are all xrep_notsupported) get called to return EOPNOTSUPP. Commit
48a72 is tagged here because the scrub code prior to LTS 6.12 are
incomplete and not worth patching.
Reported-by: David Flynn <david.flynn@oracle.com>
Cc: <stable@vger.kernel.org> # v6.8
Fixes: 8336a64eb7 ("xfs: don't complain about unfixed metadata when repairs were injected")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The Renesas RZ/G3S supports a power-saving mode where power to most of
the SoC components is lost, including the PIN controller. Save and
restore the pull-up/pull-down register contents to ensure the
functionality is preserved after a suspend/resume cycle.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250205100116.2032765-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer,
controlled over I2C. It usually sits between a USB/DisplayPort PHY
and the Type-C connector, and provides orientation and altmode handling.
The boards that use this retimer are the ones featuring the Qualcomm
Snapdragon X Elite SoCs.
Add a driver with support for the following modes:
- DisplayPort 4-lanes
- DisplayPort 2-lanes + USB3
- USB3
There is another variant of this retimer which is called PS8833. It seems
to be really similar to the PS8830, so future-proof this driver by
naming it ps883x.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250206-x1e80100-ps8830-v6-2-60b1e49cfa8d@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer,
controlled over I2C. It usually sits between a USB/DisplayPort PHY and the
Type-C connector, and provides orientation and altmode handling.
Currently, it is found on all boards featuring the Qualcomm Snapdragon
X Elite SoCs.
Document bindings for its new driver. Future-proof the schema for the
PS8833 variant, which seems to be similar to PS8830.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250206-x1e80100-ps8830-v6-1-60b1e49cfa8d@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250212202913.23443-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel Merrifield SoC uses these endpoints for tracing and they cannot
be re-allocated if being used because the side band flow control signals
are hard wired to certain endpoints:
• 1 High BW Bulk IN (IN#1) (RTIT)
• 1 1KB BW Bulk IN (IN#8) + 1 1KB BW Bulk OUT (Run Control) (OUT#8)
In device mode, since RTIT (EP#1) and EXI/RunControl (EP#8) uses
External Buffer Control (EBC) mode, these endpoints are to be mapped to
EBC mode (to be done by EXI target driver). Additionally TRB for RTIT
and EXI are maintained in STM (System Trace Module) unit and the EXI
target driver will as well configure the TRB location for EP #1 IN
and EP#8 (IN and OUT). Since STM/PTI and EXI hardware blocks manage
these endpoints and interface to OTG3 controller through EBC interface,
there is no need to enable any events (such as XferComplete etc)
for these end points.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250212193116.2487289-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The snps,reserved-endpoints property lists the reserved endpoints
that shouldn't be used for normal transfers. Add support for that
to the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250212193116.2487289-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prepare the gadget driver to handle the reserved endpoints that will be
not allocated at the initialisation time.
While at it, add a warning where the NULL endpoint should never happen.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250212193116.2487289-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the endpoints may be reserved by hardware for different purposes,
e.g., tracing control and output. This is the case, for instance, on
Intel Merrifield and Moorefield platforms that reserve a few and USB driver
may not use them for the regular transfers. Add the respective bindings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250212193116.2487289-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A manual EC sysjump will restart the PPM and break communication with
the UCSI driver by disabling notifications in the initial PPM state.
Update cros_ec_ucsi to listen for PPM init events and treat them as a
system resume to re-establish communication with the PPM (ChromeOS EC).
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Łukasz Bartosik <ukaszb@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20250204024600.4138776-3-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update cros_ec_commands.h to include a definition for PD_EVENT_INIT.
On platforms supporting UCSI, this host event type is sent when the PPM
initializes.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Łukasz Bartosik <ukaszb@chromium.org>
Link: https://lore.kernel.org/r/20250204024600.4138776-2-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is
used by the Policy Engine in Dual-Role Power device that is currently
acting as a Sink to timeout on a PS_RDY Message during a Power Role
Swap sequence. This condition leads to a Hard Reset for USB Type-A and
Type-B Plugs and Error Recovery for Type-C plugs and return to USB
Default Operation.
Therefore, after PSSourceOffTimer timeout, the tcpm state machine should
switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also
solve the test items in the USB power delivery compliance test:
TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout
[1] https://usb.org/document-library/usb-power-delivery-compliance-test-specification-0/USB_PD3_CTS_Q4_2025_OR.zip
Fixes: f0690a25a1 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@kernel.org>
Signed-off-by: Jos Wang <joswang@lenovo.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://lore.kernel.org/r/20250213134921.3798-1-joswang1221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The role switch registration and set_role() can happen in parallel as they
are invoked independent of each other. There is a possibility that a driver
might spend significant amount of time in usb_role_switch_register() API
due to the presence of time intensive operations like component_add()
which operate under common mutex. This leads to a time window after
allocating the switch and before setting the registered flag where the set
role notifications are dropped. Below timeline summarizes this behavior
Thread1 | Thread2
usb_role_switch_register() |
| |
---> allocate switch |
| |
---> component_add() | usb_role_switch_set_role()
| | |
| | --> Drop role notifications
| | since sw->registered
| | flag is not set.
| |
--->Set registered flag.|
To avoid this, set the registered flag early on in the switch register
API.
Fixes: b787a3e781 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered")
Cc: stable <stable@kernel.org>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The behaviour of kthread_create_worker() was recently changed to align
with the one of kthread_create(). The kthread worker is created but not
awaken by default. This is to allow the use of kthread_affine_preferred()
and kthread_bind[_mask]() with kthread workers. In order to keep the
old behaviour and wake the kthread up, kthread_run_worker() must be
used. All the pre-existing users have been converted, except for UVC
that was introduced in the same merge window as the API change.
This results in hangs:
INFO: task UVCG:82 blocked for more than 491 seconds.
Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1
task:UVCG state:D stack:0 pid:82
Call Trace:
__schedule
schedule
schedule_preempt_disabled
kthread
? kthread_flush_work
ret_from_fork
ret_from_fork_asm
entry_INT80_32
Fix this with converting UVCG kworker to the new API.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com
Fixes: f0bbfbd16b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue")
Cc: stable <stable@kernel.org>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Teclast disk used on Huawei hisi platforms doesn't work well,
losing connectivity intermittently if LPM is enabled.
Add quirk disable LPM to resolve the issue.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up.
Fixes: 5702f75375 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Roy Luo <royluo@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When usb_control_msg is used in the get_bMaxPacketSize0 function, the
USB pipe does not include the endpoint device number. This can cause
failures when a usb hub port is reinitialized after encountering a bad
cable connection. As a result, the system logs the following error
messages:
usb usb2-port1: cannot reset (err = -32)
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb usb2-port1: attempt power cycle
usb 2-1: new high-speed USB device number 5 using ci_hdrc
usb 2-1: device descriptor read/8, error -71
The problem began after commit 85d07c5562 ("USB: core: Unite old
scheme and new scheme descriptor reads"). There
usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike
usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the
macro usb_rcvaddr0pipe, which does not include the endpoint device
number. usb_get_device_descriptor, on the other hand, used the macro
usb_rcvctrlpipe, which includes the endpoint device number.
By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe
instead of usb_rcvaddr0pipe, the issue can be resolved. This change will
ensure that the endpoint device number is included in the USB pipe,
preventing reinitialization failures. If the endpoint has not set the
device number yet, it will still work because the device number is 0 in
udev.
Cc: stable <stable@kernel.org>
Fixes: 85d07c5562 ("USB: core: Unite old scheme and new scheme descriptor reads")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250203105840.17539-1-eichest@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a frequent timeout during controller enter/exit from halt state
after toggling the run_stop bit by SW. This timeout occurs when
performing frequent role switches between host and device, causing
device enumeration issues due to the timeout. This issue was not present
when USB2 suspend PHY was disabled by passing the SNPS quirks
(snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS.
However, there is a requirement to enable USB2 suspend PHY by setting of
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts
in gadget or host mode results in the timeout issue.
This commit addresses this timeout issue by ensuring that the bits
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting
the dwc3_gadget_run_stop sequence and restoring them after the
dwc3_gadget_run_stop sequence is completed.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Building the test creates binaries 'wait-pipe' and
'sandbox-and-launch' which need to be gitignore'd.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Link: https://lore.kernel.org/r/20250210161101.6024-1-bharadwaj.raju777@gmail.com
[mic: Sort entries]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Extend protocol_variant structure with protocol field (Cf. socket(2)).
Extend protocol fixture with TCP test suits with protocol=IPPROTO_TCP
which can be used as an alias for IPPROTO_IP (=0) in socket(2).
Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Link: https://lore.kernel.org/r/20250205093651.1424339-3-ivanov.mikhail1@huawei-partners.com
Cc: <stable@vger.kernel.org> # 6.7.x
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Use sk_is_tcp() to check if socket is TCP in bind(2) and connect(2)
hooks.
SMC, MPTCP, SCTP protocols are currently restricted by TCP access
rights. The purpose of TCP access rights is to provide control over
ports that can be used by userland to establish a TCP connection.
Therefore, it is incorrect to deny bind(2) and connect(2) requests for a
socket of another protocol.
However, SMC, MPTCP and RDS implementations use TCP internal sockets to
establish communication or even to exchange packets over a TCP
connection [1]. Landlock rules that configure bind(2) and connect(2)
usage for TCP sockets should not cover requests for sockets of such
protocols. These protocols have different set of security issues and
security properties, therefore, it is necessary to provide the userland
with the ability to distinguish between them (eg. [2]).
Control over TCP connection used by other protocols can be achieved with
upcoming support of socket creation control [3].
[1] https://lore.kernel.org/all/62336067-18c2-3493-d0ec-6dd6a6d3a1b5@huawei-partners.com/
[2] https://lore.kernel.org/all/20241204.fahVio7eicim@digikod.net/
[3] https://lore.kernel.org/all/20240904104824.1844082-1-ivanov.mikhail1@huawei-partners.com/
Closes: https://github.com/landlock-lsm/linux/issues/40
Fixes: fff69fb03d ("landlock: Support network rules with TCP bind and connect")
Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Link: https://lore.kernel.org/r/20250205093651.1424339-2-ivanov.mikhail1@huawei-partners.com
[mic: Format commit message to 72 columns]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
* Fix some whitespace, punctuation and minor grammar.
* Add a missing sentence about the minimum ABI version,
to stay in line with the section next to it.
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Cc: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250124154445.162841-1-gnoack@google.com
[mic: Add newlines, update doc date]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Since commit 5155cbcdbf ("af_unix: Add a prompt to
CONFIG_AF_UNIX_OOB"), the Landlock selftests's configuration is not
enough to build a minimal kernel. Because scoped_signal_test checks
with the MSG_OOB flag, we need to enable CONFIG_AF_UNIX_OOB for tests:
# RUN fown.no_sandbox.sigurg_socket ...
# scoped_signal_test.c:420:sigurg_socket:Expected 1 (1) == send(client_socket, ".", 1, MSG_OOB) (-1)
# sigurg_socket: Test terminated by assertion
# FAIL fown.no_sandbox.sigurg_socket
...
Cc: Günther Noack <gnoack@google.com>
Acked-by: Florent Revest <revest@chromium.org>
Link: https://lore.kernel.org/r/20250211132531.1625566-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The fastboot tool for communicating with Android bootloaders does not
work reliably with this device if USB 2 Link Power Management (LPM)
is enabled.
Various fastboot commands are affected, including the
following, which usually reproduces the problem within two tries:
fastboot getvar kernel
getvar:kernel FAILED (remote: 'GetVar Variable Not found')
This issue was hidden on many systems up until commit 63a1f84549
("xhci: stored cached port capability values in one place") as the xhci
driver failed to detect USB 2 LPM support if USB 3 ports were listed
before USB 2 ports in the "supported protocol capabilities".
Adding the quirk resolves the issue. No drawbacks are expected since
the device uses different USB product IDs outside of fastboot mode, and
since fastboot commands worked before, until LPM was enabled on the
tested system by the aforementioned commit.
Based on a patch from Forest <forestix@nom.one> from which most of the
code and commit message is taken.
Cc: stable <stable@kernel.org>
Reported-by: Forest <forestix@nom.one>
Closes: https://lore.kernel.org/hk8umj9lv4l4qguftdq1luqtdrpa1gks5l@sonic.net
Tested-by: Forest <forestix@nom.one>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250206151836.51742-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Renesas R-Car D3 USB Download mode quirk and update comments
on all the other Renesas R-Car USB Download mode quirks to discern
them from each other. This follows R-Car Series, 3rd Generation
reference manual Rev.2.00 chapter 19.2.8 USB download mode .
Fixes: 6d853c9e41 ("usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250209145708.106914-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we receive an initial fragment of size 8 bytes which specifies a wLength
of 1 byte (so the reassembled message is supposed to be 9 bytes long), and
we then receive a second fragment of size 9 bytes (which is not supposed to
happen), we currently wrongly bypass the fragment reassembly code but still
pass the pointer to the acm->notification_buffer to
acm_process_notification().
Make this less wrong by always going through fragment reassembly when we
expect more fragments.
Before this patch, receiving an overlong fragment could lead to `newctrl`
in acm_process_notification() being uninitialized data (instead of data
coming from the device).
Cc: stable <stable@kernel.org>
Fixes: ea2583529c ("cdc-acm: reassemble fragmented notifications")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the first fragment is shorter than struct usb_cdc_notification, we can't
calculate an expected_size. Log an error and discard the notification
instead of reading lengths from memory outside the received data, which can
lead to memory corruption when the expected_size decreases between
fragments, causing `expected_size - acm->nb_index` to wrap.
This issue has been present since the beginning of git history; however,
it only leads to memory corruption since commit ea2583529c
("cdc-acm: reassemble fragmented notifications").
A mitigating factor is that acm_ctrl_irq() can only execute after userspace
has opened /dev/ttyACM*; but if ModemManager is running, ModemManager will
do that automatically depending on the USB device's vendor/product IDs and
its other interfaces.
Cc: stable <stable@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
