Use struct intel_display wherever possible in intel_display_debug_fs.c
to reduce the use of drm_i915_private.
While at it do the opportunistic display->platform.xx replacement.
--v2
-Rebase
--v3
-Don't use inline to_intel_display [Jani]
-Don't use display debug fs as subject prefix [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-2-suraj.kandpal@intel.com
Reduce verbosity by using gpiod_multi_set_value_cansleep() instead of
gpiod_set_array_value_cansleep().
Also add max3191x_ namespace prefix to the driver's helper function
since we are changing the function signature anyway.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250210-gpio-set-array-helper-v3-6-d6a673674da8@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This reverts commit b8baac3b9c.
IPv4 packets with no DF flag set on result in frequent flow entry
teardown cycles, this is visible in the network topology that is used in
the nft_flowtable.sh test.
nft_flowtable.sh test ocassionally fails reporting that the dscp_fwd
test sees no packets going through the flowtable path.
Fixes: b8baac3b9c ("netfilter: flowtable: teardown flow if cached mtu is stale")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new gpiod_multi_set_value_cansleep() helper function with fewer
parameters than gpiod_set_array_value_cansleep().
Calling gpiod_set_array_value_cansleep() can get quite verbose. In many
cases, the first arguments all come from the same struct gpio_descs, so
having a separate function where we can just pass that cuts down on the
boilerplate.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250210-gpio-set-array-helper-v3-1-d6a673674da8@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
hid-sensors
- Fix an ABI issue that occurred when we gained multiple proximity sensor
support.
adi,adi-axi-adc
- Fix missing pwm-names inItems entry in dt binding.
adi,ad3552r
- Make sure to clear the reset bit in the status flag so future
resets can be detected.
adi,ad7192
- Fix use of value where it should be bit(value) to select channel.
adi,ad7606
- Fix up reporting of wrong available scales.
adi,admv8818
- Force SDO line to be initialized without relying on it already being
intialized to read back current register value.
atmel,sama5d2
- Fix wrong number of bits reported for readings from sama7g5
avago,apds9306
- Fix wrong scaling of scale values (missing a few zeros).
microchip,pac1921
- Fix resource leak by moving ACPI_FREE() call up a few lines.
tyhx,hx9023s
- Fix a use after free caused by releasing firmware a few lines early.
-----BEGIN PGP SIGNATURE-----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=askj
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.14 cycle
hid-sensors
- Fix an ABI issue that occurred when we gained multiple proximity sensor
support.
adi,adi-axi-adc
- Fix missing pwm-names inItems entry in dt binding.
adi,ad3552r
- Make sure to clear the reset bit in the status flag so future
resets can be detected.
adi,ad7192
- Fix use of value where it should be bit(value) to select channel.
adi,ad7606
- Fix up reporting of wrong available scales.
adi,admv8818
- Force SDO line to be initialized without relying on it already being
intialized to read back current register value.
atmel,sama5d2
- Fix wrong number of bits reported for readings from sama7g5
avago,apds9306
- Fix wrong scaling of scale values (missing a few zeros).
microchip,pac1921
- Fix resource leak by moving ACPI_FREE() call up a few lines.
tyhx,hx9023s
- Fix a use after free caused by releasing firmware a few lines early.
* tag 'iio-fixes-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: filter: admv8818: Force initialization of SDO
iio: adc: ad7606: fix wrong scale available
dt-bindings: iio: dac: adi-axi-adc: fix ad7606 pwm-names
iio: dac: ad3552r: clear reset status flag
iio: adc: ad7192: fix channel select
iio: hid-sensor-prox: Split difference from multiple channels
iio: proximity: Fix use-after-free in hx9023s_send_cfg()
iio: adc: at91-sama5d2_adc: fix sama7g5 realbits value
iio: adc: pac1921: Move ACPI_FREE() to cover all branches
iio: light: apds9306: fix max_scale_nano values
Erhard reported the following KASAN hit while booting his PowerMac G4
with a KASAN-enabled kernel 6.13-rc6:
BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8
Write of size 8 at addr f1000000 by task chronyd/1293
CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2
Tainted: [W]=WARN
Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Call Trace:
[c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable)
[c24375b0] [c0504998] print_report+0xdc/0x504
[c2437610] [c050475c] kasan_report+0xf8/0x108
[c2437690] [c0505a3c] kasan_check_range+0x24/0x18c
[c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8
[c24376c0] [c004c014] patch_instructions+0x15c/0x16c
[c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c
[c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac
[c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec
[c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478
[c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14
[c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4
[c24379d0] [c027111c] do_seccomp+0x3dc/0x1890
[c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420
[c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c
--- interrupt: c00 at 0x5a1274
NIP: 005a1274 LR: 006a3b3c CTR: 005296c8
REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4)
MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000
GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932
GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57
GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002
GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001
NIP [005a1274] 0x5a1274
LR [006a3b3c] 0x6a3b3c
--- interrupt: c00
The buggy address belongs to the virtual mapping at
[f1000000, f1002000) created by:
text_area_cpu_up+0x20/0x190
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30
flags: 0x80000000(zone=2)
raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001
raw: 00000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not
initialised hence not supposed to be used yet.
Powerpc text patching infrastructure allocates a virtual memory area
using get_vm_area() and flags it as VM_ALLOC. But that flag is meant
to be used for vmalloc() and vmalloc() allocated memory is not
supposed to be used before a call to __vmalloc_node_range() which is
never called for that area.
That went undetected until commit e4137f0881 ("mm, kasan, kmsan:
instrument copy_from/to_kernel_nofault")
The area allocated by text_area_cpu_up() is not vmalloc memory, it is
mapped directly on demand when needed by map_kernel_page(). There is
no VM flag corresponding to such usage, so just pass no flag. That way
the area will be unpoisonned and usable immediately.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20250112135832.57c92322@yea/
Fixes: 37bc3e5fd7 ("powerpc/lib/code-patching: Use alternate map for patch_instruction()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/06621423da339b374f48c0886e3a5db18e896be8.1739342693.git.christophe.leroy@csgroup.eu
Spurious immediate wake up events are reported on Acer Nitro ANV14. GPIO 11 is
specified as an edge triggered input and also a wake source but this pin is
supposed to be an output pin for an LED, so it's effectively floating.
Block the interrupt from getting set up for this GPIO on this device.
Cc: stable@vger.kernel.org
Reported-by: Delgan <delgan.py@gmail.com>
Tested-by: Delgan <delgan.py@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3954
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250211203222.761206-1-superm1@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Let FSCONFIG_SET_FD handle O_PATH file descriptors. This is particularly
useful in the context of overlayfs where layers can be specified via
file descriptors instead of paths. But userspace must currently use
non-O_PATH file desriptors which is often pointless especially if
the file descriptors have been created via open_tree(OPEN_TREE_CLONE).
Link: https://lore.kernel.org/r/20250210-work-overlayfs-v2-1-ed2a949b674b@kernel.org
Fixes: a08557d19e ("ovl: specify layers via file descriptors")
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Ensure drm headers build, are self-contained, have header guards, and
have no kernel-doc warnings, when CONFIG_DRM_HEADER_TEST=y.
The mechanism follows similar patters used in i915, xe, and usr/include.
To cover include/drm, we need to recurse there using the top level
Kbuild and the new include/Kbuild files.
v4: check for CONFIG_WERROR in addition to CONFIG_DRM_WERROR
v3: adapt to upstream build changes
v2: make DRM_HEADER_TEST depend on DRM
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d8ad1c6d707f38a55987f616cb9650aef30b84e1.1737556766.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Platforms can have a standardized connector/expansion slot that exposes
signals like PWMs to expansion boards in an SoC agnostic way.
The support for nexus node [1] has been added to handle those cases in
commit bd6f2fd5a1 ("of: Support parsing phandle argument lists through
a nexus node"). This commit introduced of_parse_phandle_with_args_map()
to handle nexus nodes in a generic way and the gpio subsystem adopted
the support in commit c11e6f0f04 ("gpio: Support gpio nexus dt
bindings").
A nexus node allows to remap a phandle list in a consumer node through a
connector node in a generic way. With this remapping supported, the
consumer node needs to knwow only about the nexus node. Resources behind
the nexus node are decoupled by the nexus node itself.
This is particularly useful when this consumer is described in a
device-tree overlay. Indeed, to have the exact same overlay reused with
several base systems the overlay needs to known only about the connector
is going to be applied to without any knowledge of the SoC (or the
component providing the resource) available in the system.
As an example, suppose 3 PWMs connected to a connector. The connector
PWM 0 and 2 comes from the PWM 1 and 3 of the pwm-controller1. The
connector PWM 1 comes from the PWM 4 of the pwm-controller2. An
expansion device is connected to the connector and uses the connector
PMW 1.
Nexus node support in PWM allows the following description:
soc {
soc_pwm1: pwm-controller1 {
#pwm-cells = <3>;
};
soc_pwm2: pwm-controller2 {
#pwm-cells = <3>;
};
};
connector: connector {
#pwm-cells = <3>;
pwm-map = <0 0 0 &soc_pwm1 1 0 0>,
<1 0 0 &soc_pwm2 4 0 0>,
<2 0 0 &soc_pwm1 3 0 0>;
pwm-map-mask = <0xffffffff 0x0 0x0>;
pwm-map-pass-thru = <0x0 0xffffffff 0xffffffff>;
};
expansion_device {
pwms = <&connector 1 57000 0>;
};
>From the expansion device point of view, the PWM requested is the PWM 1
available at the connector regardless of the exact PWM wired to this
connector PWM 1. Thanks to nexus node remapping described at connector
node, this PWM is the PWM 4 of the pwm-controller2.
The nexus node remapping handling consists in handling #pwm-cells,
pwm-map, pwm-map-mask and pwm-map-pass-thru properties. This is already
supported by of_parse_phandle_with_args_map() thanks to its stem_name
parameter.
Add support for nexus node device-tree binding and the related remapping
in the PWM subsystem by simply using of_parse_phandle_with_args_map()
instead of of_parse_phandle_with_args().
[1] https://github.com/devicetree-org/devicetree-specification/blob/v0.4/source/chapter2-devicetree-basics.rst#nexus-nodes-and-specifier-mapping
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20250205095547.536083-3-herve.codina@bootlin.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Platforms can have a standardized connector/expansion slot that exposes
PWMs signals to expansion boards.
A nexus node [1] allows to remap a phandle list in a consumer node
through a connector node in a generic way. With this remapping, the
consumer node needs to know only about the nexus node. Resources behind
the nexus node are decoupled by the nexus node itself.
This is particularly useful when this consumer is described in a
device-tree overlay. Indeed, to have the exact same overlay reused with
several base systems the overlay needs to known only about the connector
is going to be applied to without any knowledge of the SoC (or the
component providing the resource) available in the system.
As an example, suppose 3 PWMs connected to a connector. The connector
PWM 0 and 2 comes from the PWM 1 and 3 of the pwm-controller1. The
connector PWM 1 comes from the PWM 4 of the pwm-controller2. An
expansion device is connected to the connector and uses the connector
PMW 1.
Nexus node support in PWM allows the following description:
soc {
soc_pwm1: pwm-controller1 {
#pwm-cells = <3>;
};
soc_pwm2: pwm-controller2 {
#pwm-cells = <3>;
};
};
connector: connector {
#pwm-cells = <3>;
pwm-map = <0 0 0 &soc_pwm1 1 0 0>,
<1 0 0 &soc_pwm2 4 0 0>,
<2 0 0 &soc_pwm1 3 0 0>;
pwm-map-mask = <0xffffffff 0x0 0x0>;
pwm-map-pass-thru = <0x0 0xffffffff 0xffffffff>;
};
expansion_device {
pwms = <&connector 1 57000 0>;
};
>From the expansion device point of view, the PWM requested is the PWM 1
available at the connector regardless of the exact PWM wired to this
connector PWM 1. Thanks to nexus node remapping described at connector
node, this PWM is the PWM 4 of the pwm-controller2.
[1] https://github.com/devicetree-org/devicetree-specification/blob/v0.4/source/chapter2-devicetree-basics.rst#nexus-nodes-and-specifier-mapping
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[ukleinek: Make description node use folded style (>) as suggested by Rob]
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250205095547.536083-2-herve.codina@bootlin.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Currently, there are 3 regulators defined in JH7110's common device tree,
but regulator names are mixed with "-" and "_". So unify them to "_",
which is more often to be seen in other dts files.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
platform_get_resource_byname() and devm_ioremap_resource() can be
replaced by devm_platform_ioremap_resource_byname(), which can
simplify the code logic a bit, No functional change here.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828084929.2527228-1-ruanjinjie@huawei.com
The camera subsystem for the SDM670 the same as on SDM845 except with
3 CSIPHY ports instead of 4. Add support for the SDM670 camera
subsystem.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with
3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to
the bindings.
Adapted from SC8280XP camera subsystem.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Convert most mutex_(un)lock calls to use (scoped_)guard instead. This
generally reduces line count and prevents bugs like forgetting to unlock
the mutex. I've left traditional calls in a few places where scoped
helpers would be more verbose. This mostly happens where
debugfs_file_put needs to be called regardless. I looked into defining a
CLASS for debugfs_file, but it seems like more effort than it's worth
since debugfs_file_get can fail.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207162528.1651426-3-sean.anderson@linux.dev
Instead of attempting the same mutex twice, lock and unlock it.
This bug has been detected by the Clang thread-safety analyzer.
Cc: Sean Anderson <sean.anderson@linux.dev>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 28edaacb82 ("drm: zynqmp_dp: Add debugfs interface for compliance testing")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207162528.1651426-2-sean.anderson@linux.dev
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-02-10 (ice, igc, e1000e)
For ice:
Karol, Jake, and Michal add PTP support for E830 devices. Karol
refactors and cleans up PTP code. Jake allows for a common
cross-timestamp implementation to be shared for all devices and
Michal adds E830 support.
Mateusz cleans up initial Flow Director rule creation to loop rather
than duplicate repeated similar calls.
For igc:
Siang adjust calls to remove need for close and open calls on loading
XDP program.
For e1000e:
Gerhard Engleder batches register writes for writing multicast table
on real-time kernels.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
e1000e: Fix real-time violations on link up
igc: Avoid unnecessary link down event in XDP_SETUP_PROG process
ice: refactor ice_fdir_create_dflt_rules() function
ice: Implement PTP support for E830 devices
ice: Refactor ice_ptp_init_tx_*
ice: Add unified ice_capture_crosststamp
ice: Process TSYN IRQ in a separate function
ice: Use FIELD_PREP for timestamp values
ice: Remove unnecessary ice_is_e8xx() functions
ice: Don't check device type when checking GNSS presence
====================
Link: https://patch.msgid.link/20250210192352.3799673-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently xe_guc_log_print_dmesg() is unused, as it's expected
developers to add those calls when needed. However it makes it hard to
guarantee it's working as nothing is testing it. Add a node in debugfs
so it can be tested. This is purely for testing purposes since with the
device probed and working, the guc log can be obtained by the regular
debugfs file.
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131171716.3998432-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2746!
CPU: 0 UID: 0 PID: 5323 Comm: syz.0.0 Not tainted 6.13.0-rc2-syzkaller-00018-g7cb1b4663150 #0
RIP: 0010:get_new_segment fs/f2fs/segment.c:2746 [inline]
RIP: 0010:new_curseg+0x1f52/0x1f70 fs/f2fs/segment.c:2876
Call Trace:
<TASK>
__allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3210
f2fs_allocate_new_section fs/f2fs/segment.c:3224 [inline]
f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3238
f2fs_expand_inode_data+0x696/0xca0 fs/f2fs/file.c:1830
f2fs_fallocate+0x537/0xa10 fs/f2fs/file.c:1940
vfs_fallocate+0x569/0x6e0 fs/open.c:327
do_vfs_ioctl+0x258c/0x2e40 fs/ioctl.c:885
__do_sys_ioctl fs/ioctl.c:904 [inline]
__se_sys_ioctl+0x80/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Concurrent pinfile allocation may run out of free section, result in
panic in get_new_segment(), let's expand pin_sem lock coverage to
include f2fs_gc(), so that we can make sure to reclaim enough free
space for following allocation.
In addition, do below changes to enhance error path handling:
- call f2fs_bug_on() only in non-pinfile allocation path in
get_new_segment().
- call reset_curseg_fields() to reset all fields of curseg in
new_curseg()
Fixes: f5a53edcf0 ("f2fs: support aligned pinned file")
Reported-by: syzbot+15669ec8c35ddf6c3d43@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/675cd64e.050a0220.37aaf.00bb.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds an ioctl to give a per-file priority hint to attach
REQ_PRIO.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
To show call stack, so that we can see who causes critical error, note
that it won't call dump_stack() for shutdown path.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For Linux, running in Hyper-V VTL (Virtual Trust Level), kernel in VTL2
tries to access VTL0 low memory in probe_roms. This memory is not
described in the e820 map. Initialize probe_roms call to no-ops
during boot for VTL2 kernel to avoid this. The issue got identified
in OpenVMM which detects invalid accesses initiated from kernel running
in VTL2.
Co-developed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250116061224.1701-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250116061224.1701-1-namjain@linux.microsoft.com>
If the netdev lock has been obtained, unlock it before returning.
This bug has been detected by the Clang thread-safety analyzer.
Fixes: afc664987a ("eth: iavf: extend the netdev_lock usage")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20250206175114.1974171-28-bvanassche@acm.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree says:
====================
sfc: support devlink flash
Allow upgrading device firmware on Solarflare NICs through standard tools.
====================
Link: https://patch.msgid.link/cover.1739186252.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the information in sfc's devlink documentation including
support for firmware update with devlink flash.
Also update the help text for CONFIG_SFC_MTD, as it is no longer
strictly required for firmware updates.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/3476b0ef04a0944f03e0b771ec8ed1a9c70db4dc.1739186253.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support variable write-alignment, and background updates. The latter
allows other MCDI to continue while the device is processing an
MC_CMD_NVRAM_UPDATE_FINISH, since this can take a long time owing to
e.g. cryptographic signature verification.
Expose these handlers in mcdi.h, and build them even when
CONFIG_SFC_MTD=n, so they can be used for devlink flash in a
subsequent patch.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/de3d9e14fee69e15d95b46258401a93b75659f78.1739186253.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Huisong Li says:
====================
Use HWMON_CHANNEL_INFO macro to simplify code
The HWMON_CHANNEL_INFO macro is provided by hwmon.h and used widely by many
other drivers. This series use HWMON_CHANNEL_INFO macro to simplify code
in net subsystem.
Note: These patches do not depend on each other. Put them togeter just for
belonging to the same subsystem.
====================
Link: https://patch.msgid.link/20250210054710.12855-1-lihuisong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc: Fix alteration of headers whilst zerocopy pending
AF_RXRPC now uses MSG_SPLICE_PAGES to do zerocopy of the DATA packets when
it transmits them, but to reduce the number of descriptors required in the
DMA ring, it allocates a space for the protocol header in the memory
immediately before the data content so that it can include both in a single
descriptor. This is used for either the main RX header or the smaller
jumbo subpacket header as appropriate:
+----+------+
| RX | |
+-+--+DATA |
|JH| |
+--+------+
Now, when it stitches a large jumbo packet together from a number of
individual DATA packets (each of which is 1412 bytes of data), it uses the
full RX header from the first and then the jumbo subpacket header for the
rest of the components:
+---+--+------+--+------+--+------+--+------+--+------+--+------+
|UDP|RX|DATA |JH|DATA |JH|DATA |JH|DATA |JH|DATA |JH|DATA |
+---+--+------+--+------+--+------+--+------+--+------+--+------+
As mentioned, the main RX header and the jumbo header overlay one another
in memory and the formats don't match, so switching from one to the other
means rearranging the fields and adjusting the flags.
However, now that TLP has been included, it wants to retransmit the last
subpacket as a new data packet on its own, which means switching between
the header formats... and if the transmission is still pending, because of
the MSG_SPLICE_PAGES, we end up corrupting the jumbo subheader.
This has a variety of effects, with the RX service number overwriting the
jumbo checksum/key number field and the RX checksum overwriting the jumbo
flags - resulting in, at the very least, a confused connection-level abort
from the peer.
Fix this by leaving the jumbo header in the allocation with the data, but
allocating the RX header from the page frag allocator and concocting it on
the fly at the point of transmission as it does for ACK packets.
Fixes: 7c48266593 ("rxrpc: Implement RACK/TLP to deal with transmission stalls [RFC8985]")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2181712.1739131675@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netfs library could break down a read request into
multiple subrequests. When multichannel is used, there is
potential to improve performance when each of these
subrequests pick a different channel.
Today we call cifs_pick_channel when the main read request
is initialized in cifs_init_request. This change moves this to
cifs_prepare_read, which is the right place to pick channel since
it gets called for each subrequest.
Interestingly cifs_prepare_write already does channel selection
for individual subreq, but looks like it was missed for read.
This is especially important when multichannel is used with
increased rasize.
In my test setup, with rasize set to 8MB, a sequential read
of large file was taking 11.5s without this change. With the
change, it completed in 9s. The difference is even more signigicant
with bigger rasize.
Cc: <stable@vger.kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On powerpc, a CPU does not necessarily originate from NUMA node 0.
This contrasts with architectures like x86, where CPU 0 is not
hot-pluggable, making NUMA node 0 a consistently valid node.
This discrepancy can lead to failures when creating a map on NUMA
node 0, which is initialized by default, if no CPUs are allocated
from NUMA node 0.
This patch fixes the issue by setting NUMA_NO_NODE (-1) for map
creation for this selftest.
Fixes: 96eabe7a40 ("bpf: Allow selecting numa node during map creation")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/cf1f61468b47425ecf3728689bc9636ddd1d910e.1738302337.git.skb99@linux.ibm.com
Since commit 7e92e01b72 ("powerpc: Provide syscall wrapper")
landed in v6.1, syscall wrapper is enabled on powerpc. Commit
9474689020 ("powerpc: Don't add __powerpc_ prefix to syscall
entry points") , that drops the prefix to syscall entry points,
also landed in the same release. So, add the missing empty
SYS_PREFIX prefix definition for powerpc, to fix some fentry
and kprobe selftests.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/7192d6aa9501115dc242435970df82b3d190f257.1738302337.git.skb99@linux.ibm.com
The header clearly states that it does not want to be included directly,
only via '<linux/(platform_)?device.h>'. Which is already present, so
delete the superfluous include.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20250210113710.52071-2-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The header clearly states that it does not want to be included directly,
only via '<linux/(platform_)?device.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250210113658.52019-2-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both definitions are unused. Last users have been removed with:
1577ecef76 ("netdev: Merge UCC and gianfar MDIO bus drivers")
728de4c927 ("ucc_geth: migrate ucc_geth to phylib")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/62e9429b-57e0-42ec-96a5-6a89553f441d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both definitions are unused. Last users have been removed with:
f3ba9d490d ("net: s6gmac: remove driver")
2bd229df5e ("net: phy: remove state PHY_FORCING")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/f8e7b8ed-a665-41ad-b0ce-cbfdb65262ef@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
