We should not be configuring the PHYs clock-stop settings unless the
MAC supports phylink managed EEE. Make this dependent on MAC support.
This was noticed in a suspicious RCU usage report from the kernel
test robot (the suspicious RCU usage due to calling phy_detach()
remains unaddressed, but is triggered by the error this was
generating.)
Fixes: 03abf2a7c6 ("net: phylink: add EEE management")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tgjNn-003q0w-Pw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
net: phy: rename eee_broken_mode
eee_broken_mode is used also if an EEE mode isn't actually broken
but e.g. not supported by MAC. So rename it.
This is split out from a bigger series that needs more rework.
====================
Link: https://patch.msgid.link/d7924d4e-49b0-4182-831f-73c558d4425e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Consider that an EEE mode may not be broken but simply not supported
by the MAC, and rename function phy_set_eee_broken().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/30deb630-3f6b-4ffb-a1e6-a9736021f43a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This bitmap is used also if the MAC doesn't support an EEE mode.
So the mode isn't necessarily broken in the PHY. Therefore rename
the bitmap.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/6cd11422-dd67-4c87-a642-308de694af92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix typos and spelling errors in security/smack module comments that
were identified using the codespell tool.
No functional changes - documentation only.
Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Probably left out as a mistake after Anssi created the helper macro
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
If an error happens on the device, the driver will no longer fall
into the trap of reading this status 60 times before it decides that
this reply won't change to success/memory full.
Greatly reduces communication overhead during device error situation.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Update comments to fully conform to the Linux comment styling.
Define Linux infinite effect duration (0) as FF_INFINITE
Chanage Oleg's name order
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Adds Asetek vendor id and product ids for:
- Invicta
- Forte
- La Prima
- Tony Kanaan
v2:
- Misc spelling fix in driver loaded info
v3:
- Chanage Oleg's name order
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
As noted by Anssi some 20 years ago, pool report is sometimes messed up.
This worked fine on many devices but casued oops on VRS DirectForce PRO.
Here, we're making sure pool report is refetched before trying to access
any of it's fields. While loop was replaced with a for loop + exit
conditions were moved aroud to decrease the possibility of creating an
infinite loop scenario.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
At btrfs_write_check() if our file's i_size is not sector size aligned and
we have a write that starts at an offset larger than the i_size that falls
within the same page of the i_size, then we end up not zeroing the file
range [i_size, write_offset).
The code is this:
start_pos = round_down(pos, fs_info->sectorsize);
oldsize = i_size_read(inode);
if (start_pos > oldsize) {
/* Expand hole size to cover write data, preventing empty gap */
loff_t end_pos = round_up(pos + count, fs_info->sectorsize);
ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos);
if (ret)
return ret;
}
So if our file's i_size is 90269 bytes and a write at offset 90365 bytes
comes in, we get 'start_pos' set to 90112 bytes, which is less than the
i_size and therefore we don't zero out the range [90269, 90365) by
calling btrfs_cont_expand().
This is an old bug introduced in commit 9036c10208 ("Btrfs: update hole
handling v2"), from 2008, and the buggy code got moved around over the
years.
Fix this by discarding 'start_pos' and comparing against the write offset
('pos') without any alignment.
This bug was recently exposed by test case generic/363 which tests this
scenario by polluting ranges beyond EOF with an mmap write and than verify
that after a file increases we get zeroes for the range which is supposed
to be a hole and not what we wrote with the previous mmaped write.
We're only seeing this exposed now because generic/363 used to run only
on xfs until last Sunday's fstests update.
The test was failing like this:
$ ./check generic/363
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ #17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
generic/363 0s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad)
--- tests/generic/363.out 2025-02-05 15:31:14.013646509 +0000
+++ /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad 2025-02-05 17:25:33.112630781 +0000
@@ -1 +1,46 @@
QA output created by 363
+READ BAD DATA: offset = 0xdcad, size = 0xd921, fname = /home/fdmanana/btrfs-tests/dev/junk
+OFFSET GOOD BAD RANGE
+0x1609d 0x0000 0x3104 0x0
+operation# (mod 256) for the bad data may be 4
+0x1609e 0x0000 0x0472 0x1
+operation# (mod 256) for the bad data may be 4
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/363.out /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad' to see the entire diff)
Ran: generic/363
Failures: generic/363
Failed 1 of 1 tests
Fixes: 9036c10208 ("Btrfs: update hole handling v2")
CC: stable@vger.kernel.org
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After commit ac325fc2aa ("btrfs: do not hold the extent lock for entire
read") we can now trigger a race between a task doing a direct IO write
and readahead. When this race is triggered it results in tasks getting
stale data when they attempt do a buffered read (including the task that
did the direct IO write).
This race can be sporadically triggered with test case generic/418, failing
like this:
$ ./check generic/418
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ #17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
generic/418 14s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad)
--- tests/generic/418.out 2020-06-10 19:29:03.850519863 +0100
+++ /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad 2025-02-03 15:42:36.974609476 +0000
@@ -1,2 +1,5 @@
QA output created by 418
+cmpbuf: offset 0: Expected: 0x1, got 0x0
+[6:0] FAIL - comparison failed, offset 24576
+diotest -wp -b 4096 -n 8 -i 4 failed at loop 3
Silence is golden
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/418.out /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad' to see the entire diff)
Ran: generic/418
Failures: generic/418
Failed 1 of 1 tests
The race happens like this:
1) A file has a prealloc extent for the range [16K, 28K);
2) Task A starts a direct IO write against file range [24K, 28K).
At the start of the direct IO write it invalidates the page cache at
__iomap_dio_rw() with kiocb_invalidate_pages() for the 4K page at file
offset 24K;
3) Task A enters btrfs_dio_iomap_begin() and locks the extent range
[24K, 28K);
4) Task B starts a readahead for file range [16K, 28K), entering
btrfs_readahead().
First it attempts to read the page at offset 16K by entering
btrfs_do_readpage(), where it calls get_extent_map(), locks the range
[16K, 20K) and gets the extent map for the range [16K, 28K), caching
it into the 'em_cached' variable declared in the local stack of
btrfs_readahead(), and then unlocks the range [16K, 20K).
Since the extent map has the prealloc flag, at btrfs_do_readpage() we
zero out the page's content and don't submit any bio to read the page
from the extent.
Then it attempts to read the page at offset 20K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous page, we zero out the page's content since
the extent map has the prealloc flag set.
Then it attempts to read the page at offset 24K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous pages, we zero out the page's content since
the extent map has the prealloc flag set. Note that we didn't lock the
extent range [24K, 28K), so we didn't synchronize with the ongoing
direct IO write being performed by task A;
5) Task A enters btrfs_create_dio_extent() and creates an ordered extent
for the range [24K, 28K), with the flags BTRFS_ORDERED_DIRECT and
BTRFS_ORDERED_PREALLOC set;
6) Task A unlocks the range [24K, 28K) at btrfs_dio_iomap_begin();
7) The ordered extent enters btrfs_finish_one_ordered() and locks the
range [24K, 28K);
8) Task A enters fs/iomap/direct-io.c:iomap_dio_complete() and it tries
to invalidate the page at offset 24K by calling
kiocb_invalidate_post_direct_write(), resulting in a call chain that
ends up at btrfs_release_folio().
The btrfs_release_folio() call ends up returning false because the range
for the page at file offset 24K is currently locked by the task doing
the ordered extent completion in the previous step (7), so we have:
btrfs_release_folio() ->
__btrfs_release_folio() ->
try_release_extent_mapping() ->
try_release_extent_state()
This last function checking that the range is locked and returning false
and propagating it up to btrfs_release_folio().
So this results in a failure to invalidate the page and
kiocb_invalidate_post_direct_write() triggers this message logged in
dmesg:
Page cache invalidation failure on direct I/O. Possible data corruption due to collision with buffered I/O!
After this we leave the page cache with stale data for the file range
[24K, 28K), filled with zeroes instead of the data written by direct IO
write (all bytes with a 0x01 value), so any task attempting to read with
buffered IO, including the task that did the direct IO write, will get
all bytes in the range with a 0x00 value instead of the written data.
Fix this by locking the range, with btrfs_lock_and_flush_ordered_range(),
at the two callers of btrfs_do_readpage() instead of doing it at
get_extent_map(), just like we did before commit ac325fc2aa ("btrfs: do
not hold the extent lock for entire read"), and unlocking the range after
all the calls to btrfs_do_readpage(). This way we never reuse a cached
extent map without flushing any pending ordered extents from a concurrent
direct IO write.
Fixes: ac325fc2aa ("btrfs: do not hold the extent lock for entire read")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel's initcall infrastructure lacks the ability to express
dependencies between initcalls, whereas the modules infrastructure
automatically handles dependencies via symbol loading. Ensure the
PSP SEV driver is initialized before proceeding in sev_hardware_setup()
if KVM is built-in as the dependency isn't handled by the initcall
infrastructure.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be
loaded before KVM module. In case of module loading any dependent
modules are automatically loaded but in case of built-in modules there
is no inherent mechanism available to specify dependencies between
modules and ensure that any dependent modules are loaded implicitly.
Add a new external API interface for PSP module initialization which
allows PSP SEV driver to be loaded explicitly if KVM is built-in.
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Going over the 80-column width limit, and using all 100 columns, is intended
for improving code readability. This wasn't the case in a few places in the
Quartz64 Model A/B board dts files, so let's reflow them a bit, to both obey
the 80-column limit and make them a bit more readable.
No intended functional changes are introduced by these changes.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/7eea4ebdb19d5f43d24074a166e6c46bb5424d46.1739218324.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Remove Optee node from rk3588 devicetree. When Optee is present and
used the node will be added automatically by U-Boot when
CONFIG_OPTEE_LIB=y and CONFIG_SPL_ATF_NO_PLATFORM_PARAM is not set.
When Optee is not present or used, the node will trigger a probe
that generates a (harmless) message on the kernel log.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250130181005.6319-1-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The SMMU architecture requires wired interrupts to be edge triggered,
which does not align with the DT description for the RK3588. This leads
to interrupt storms, as the SMMU continues to hold the pin high and only
pulls it down for a short amount when issuing an IRQ. Update the DT
description to be in line with the spec and perceived reality.
Signed-off-by: Patrick Wildt <patrick@blueri.se>
Fixes: cd81d3a069 ("arm64: dts: rockchip: add rk3588 pcie and php IOMMUs")
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/Z6pxme2Chmf3d3uK@windev.fritz.box
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Commit da92d3dfc8 ("arm64: dts: rockchip: enable the mmu600_pcie IOMMU
on the rk3588 SoC") enabled the mmu600_pcie IOMMU, both in the normal case
(when all PCIe controllers are running in Root Complex mode) and in the
case when running the pcie3x4 PCIe controller in Endpoint mode.
There have been no issues detected when running the PCIe controllers in
Root Complex mode. During PCI probe time, we will add a SID to the IOMMU
for each PCI device enumerated on the bus, including the root port itself.
However, when running the pcie3x4 PCIe controller in Endpoint mode, we
will only add a single SID to the IOMMU (the SID specified in the iommus
DT property).
The enablement of IOMMU in endpoint mode was verified on setup with two
Rock 5b:s, where the BDF of the Root Complex has BDF (00:00.0).
A Root Complex sending a TLP to the Endpoint will have Requester ID set
to the BDF of the initiator. On the EP side, the Requester ID will then
be used as the SID. This works fine if the Root Complex has a BDF that
matches the iommus DT property, however, if the Root Complex has any other
BDF, we will see something like:
arm-smmu-v3 fc900000.iommu: event: C_BAD_STREAMID client: (unassigned sid) sid: 0x1600 ssid: 0x0
on the endpoint side.
For PCIe controllers running in endpoint mode that always uses the
incoming Requester ID as the SID, the iommus DT property simply isn't
a viable solution. (Neither is iommu-map a viable solution, as there is
no enumeration done on the endpoint side.)
Thus, partly revert commit da92d3dfc8 ("arm64: dts: rockchip: enable the
mmu600_pcie IOMMU on the rk3588 SoC") by disabling the PCI IOMMU when
running the pcie3x4 PCIe controller in Endpoint mode.
Since the PCI IOMMU is working as expected in the normal case, keep it
enabled when running all PCIe controllers in Root Complex mode.
Fixes: da92d3dfc8 ("arm64: dts: rockchip: enable the mmu600_pcie IOMMU on the rk3588 SoC")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250207143900.2047949-2-cassel@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When rq_qos_wait() is first introduced, it is easy to understand. But
with some bug fixes applied, it is not easy for newcomers to understand
the whole logic under those fixes. In this patch, rq_qos_wait() is
refactored and more comments are added for better understanding. There
are 3 points for the improvement:
1) Use waitqueue_active() instead of wq_has_sleeper() to eliminate
unnecessary memory barrier in wq_has_sleeper() which is supposed
to be used in waker side. In this case, we do need the barrier.
So use the cheaper one to locklessly test for waiters on the queue.
2) Remove acquire_inflight_cb() logic for the first waiter out of the
while loop to make the code clear.
3) Add more comments to explain how to sync with different waiters and
the waker.
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250208090416.38642-2-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is already a macro DEFINE_WAIT_FUNC() to declare a wait_queue_entry
with a specified waking function. But there is not a counterpart for
initializing one wait_queue_entry with a specified waking function. So
introducing init_wait_func() for this, which also could be used in iocost
and rq-qos. Using default_wake_function() in rq_qos_wait() to wake up
waiters, which could remove ->task field from rq_qos_wait_data.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250208090416.38642-1-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the logic for effectively enabling the software mode for the
iio-backend, i.e. enabling the software mode channel configuration and
implementing the register writing functions.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Co-developed-by: Angelo Dureghello <adureghello@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250210-wip-bl-ad7606_add_backend_sw_mode-v4-9-160df18b1da7@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the possibility to pass the *_available parameters to the main
macro.
This is a preparation to add the new channels for software mode and
hardware mode in iio backend mode more easily.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20250210-wip-bl-ad7606_add_backend_sw_mode-v4-8-160df18b1da7@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since we must access the bus parallel bus using a custom procedure,
let's add a specialized compatible, and define specialized callbacks for
writing the registers using the parallel interface.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Co-developed-by: Angelo Dureghello <adureghello@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250210-wip-bl-ad7606_add_backend_sw_mode-v4-6-160df18b1da7@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a preparation for the next commit adding support for register
read and write functions on AD7606.
Since sometimes a bus will be used, it has been agreed during ad3552's
driver implementation that the device's driver bus is the backend, whose
device node will be a child node.
To provide the special callbacks for setting the register, axi-adc needs
to pass them to the child device's driver through platform data.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250210-wip-bl-ad7606_add_backend_sw_mode-v4-5-160df18b1da7@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since the register are always the same, whatever bus is used, moving the
software functions into the main file avoids the code to be duplicated
in both SPI and parallel version of the driver.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Co-developed-by: Angelo Dureghello <adureghello@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250210-wip-bl-ad7606_add_backend_sw_mode-v4-3-160df18b1da7@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a preparation for the intoduction of the sofware functions in
the iio backend version of the driver.
The software mode configuration must be executed once the channels are
configured, and the number of channels is known. This is not the case
before iio-backend's configuration is called, and iio backend version of
the driver does not have a timestamp channel.
Also the sw_mode_config callback is configured during the iio-backend
configuration.
For clarity purpose, I moved the entire block instead of just the
concerned function calls.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20250210-wip-bl-ad7606_add_backend_sw_mode-v4-2-160df18b1da7@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A new compatible is added to reflect the specialized version of the HDL.
We use the parallel interface to write the ADC's registers, and
accessing this interface requires to use ADI_AXI_REG_CONFIG_RD,
ADI_AXI_REG_CONFIG_WR and ADI_AXI_REG_CONFIG_CTRL in a custom fashion.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Co-developed-by: Angelo Dureghello <adureghello@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250210-wip-bl-ad7606_add_backend_sw_mode-v4-1-160df18b1da7@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The intel-lpmd tool [1], which uses the THERMAL_GENL_ATTR_CPU_CAPABILITY
attribute to receive HFI events from kernel space, encounters a
segmentation fault after commit 1773572863 ("thermal: netlink: Add the
commands and the events for the thresholds").
The issue arises because the THERMAL_GENL_ATTR_CPU_CAPABILITY raw value
was changed while intel_lpmd still uses the old value.
Although intel_lpmd can be updated to check the THERMAL_GENL_VERSION and
use the appropriate THERMAL_GENL_ATTR_CPU_CAPABILITY value, the commit
itself is questionable.
The commit introduced a new element in the middle of enum thermal_genl_attr,
which affects many existing attributes and introduces potential risks
and unnecessary maintenance burdens for userspace thermal netlink event
users.
Solve the issue by moving the newly introduced
THERMAL_GENL_ATTR_TZ_PREV_TEMP attribute to the end of the
enum thermal_genl_attr. This ensures that all existing thermal generic
netlink attributes remain unaffected.
Link: https://github.com/intel/intel-lpmd [1]
Fixes: 1773572863 ("thermal: netlink: Add the commands and the events for the thresholds")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20250208074907.5679-1-rui.zhang@intel.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a section to the ad4695 documentation describing how to use the
oversampling feature. Also add some clarification on how the
oversampling ratio influences effective sample rate in the offload
section.
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Tested-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250109-ad4695-oversampling-v2-2-a46ac487082c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the ad4695's oversampling feature when SPI offload is
available. This allows the ad4695 to set oversampling ratios on a
per-channel basis, raising the effective-number-of-bits from 16
(OSR == 1) to 17 (4), 18 (16), or 19 (64) for a given sample (i.e. one
full cycle through the auto-sequencer). The logic for reading and
writing sampling frequency for a given channel is also adjusted based on
the current oversampling ratio.
The non-offload case isn't supported as there isn't a good way to
trigger the CNV pin in this mode. Support could be added in the future
if a use-case arises.
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Tested-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250109-ad4695-oversampling-v2-1-a46ac487082c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add SPI offload support to stream TX buffers using DMA.
This allows loading samples to the DAC with a rate of 1 MSPS.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-17-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a pwms property to the adi,ad4695 binding to specify an optional PWM
output connected to the CNV pin on the ADC.
Also add #trigger-source-cells property to allow the BUSY output to be
used as a SPI offload trigger source to indicate when a sample is ready
to be read.
Macros are added to adi,ad4695.h for the cell values to help with
readability since they are arbitrary values.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-13-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for SPI offload to the ad7944 driver. This allows reading
data at the max sample rate of 2.5 MSPS.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-11-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In contrast to the commit message of the fixed commit VFs whose parent
PF is not configured are not always isolated, that is put on their own
PCI domain. This is because for VFs to be added to an existing PCI
domain it is enough for that PCI domain to share the same topology ID or
PCHID. Such a matching PCI domain without a parent PF may exist when
a PF from the same PCI card created the domain with the VF being a child
of a different, non accessible, PF. While not causing technical issues
it makes the rules which VFs are isolated inconsistent.
Fix this by explicitly checking that the parent PF exists on the PCI
domain determined by the topology ID or PCHID before registering the VF.
This works because a parent PF which is under control of this Linux
instance must be enabled and configured at the point where its child VFs
appear because otherwise SR-IOV could not have been enabled on the
parent.
Fixes: 25f39d3dcb ("s390/pci: Ignore RID for isolated VFs")
Cc: stable@vger.kernel.org
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This creates a new zpci_iov_find_parent_pf() function which a future
commit can use to find if a VF has a configured parent PF. Use
zdev->rid instead of zdev->devfn such that the new function can be used
before it has been decided if the RID will be exposed and zdev->devfn is
set. Also handle the hypotheical case that the RID is not available but
there is an otherwise matching zbus.
Fixes: 25f39d3dcb ("s390/pci: Ignore RID for isolated VFs")
Cc: stable@vger.kernel.org
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With PROFILE_ALL_BRANCHES enabled gcc sometimes fails to handle
__builtin_constant_p() correctly:
In function 'arch_test_bit',
inlined from 'node_state' at include/linux/nodemask.h:423:9,
inlined from 'warn_if_node_offline' at include/linux/gfp.h:252:2,
inlined from '__alloc_pages_node_noprof' at include/linux/gfp.h:267:2,
inlined from 'alloc_pages_node_noprof' at include/linux/gfp.h:296:9,
inlined from 'vm_area_alloc_pages.constprop' at mm/vmalloc.c:3591:11:
>> arch/s390/include/asm/bitops.h:60:17: warning: 'asm' operand 2 probably does not match constraints
60 | asm volatile(
| ^~~
>> arch/s390/include/asm/bitops.h:60:17: error: impossible constraint in 'asm'
Therefore disable the optimization for this case. This is similar to
commit 63678eecec ("s390/preempt: disable __preempt_count_add()
optimization for PROFILE_ALL_BRANCHES")
Fixes: b2bc1b1a77 ("s390/bitops: Provide optimized arch_test_bit()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502091912.xL2xTCGw-lkp@intel.com/
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In some environments, the SCLP firmware interface used to query a
CHPID's configured state is not supported. On these environments,
rapidly reading the corresponding sysfs attribute produces inconsistent
results:
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
$ cat /sys/devices/css0/chp0.00/configure
3
This occurs for example when Linux is run as a KVM guest. The
inconsistency is a result of CIO using cached results for generating
the value of the "configure" attribute while failing to handle the
situation where no data was returned by SCLP.
Fix this by not updating the cache-expiration timestamp when SCLP
returns no data. With the fix applied, the system response is
consistent:
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
s390 defconfig does not have BPF LSM, resulting in
systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
with the respective kernels. The other architectures do not explicitly
set it, and the default values have BPF in them, so just drop it.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Simplify code by replacing &to_kvm_svm(kvm)->sev_info with
to_kvm_sev_info() helper function. Wherever possible, drop the local
variable declaration and directly use the helper instead.
No functional changes.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Pavan Kumar Paluri <papaluri@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250123055140.144378-1-nikunj@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
